@gnsx/three 0.184.0

package/examples/jsm/geometries/TeapotGeometry.js

@@ -0,0 +1,689 @@
+import {
+	BufferAttribute,
+	BufferGeometry,
+	Matrix4,
+	Vector3,
+	Vector4
+} from 'three';
+
+/**
+ * Tessellates the famous Utah teapot database by Martin Newell into triangles.
+ *
+ * The teapot should normally be rendered as a double sided object, since for some
+ * patches both sides can be seen, e.g., the gap around the lid and inside the spout.
+ *
+ * Segments 'n' determines the number of triangles output. Total triangles = 32*2*n*n - 8*n
+ * (degenerates at the top and bottom cusps are deleted).
+ *
+ * Code based on [SPD software](http://tog.acm.org/resources/SPD/)
+ * Created for the Udacity course [Interactive Rendering](http://bit.ly/ericity)
+ *
+ * ```js
+ * const geometry = new TeapotGeometry( 50, 18 );
+ * const material = new THREE.MeshBasicMaterial( { color: 0x00ff00 } );
+ * const teapot = new THREE.Mesh( geometry, material );
+ * scene.add( teapot );
+ * ```
+ *
+ * @augments BufferGeometry
+ * @three_import import { TeapotGeometry } from 'three/addons/geometries/TeapotGeometry.js';
+ */
+class TeapotGeometry extends BufferGeometry {
+
+	/**
+	 * Constructs a new teapot geometry.
+	 *
+	 * @param {number} [size=50] - Relative scale of the teapot.
+	 * @param {number} [segments=10] - Number of line segments to subdivide each patch edge.
+	 * @param {boolean} [bottom=true] - Whether the bottom of the teapot is generated or not.
+	 * @param {boolean} [lid=true] - Whether the lid is generated or not.
+	 * @param {boolean} [body=true] - Whether the body is generated or not.
+	 * @param {boolean} [fitLid=true] - Whether the lid is slightly stretched to prevent gaps between the body and lid or not.
+	 * @param {boolean} [blinn=true] -  Whether the teapot is scaled vertically for better aesthetics or not.
+	 */
+	constructor( size = 50, segments = 10, bottom = true, lid = true, body = true, fitLid = true, blinn = true ) {
+
+		// 32 * 4 * 4 Bezier spline patches
+		const teapotPatches = [
+			/*rim*/
+			0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+			3, 16, 17, 18, 7, 19, 20, 21, 11, 22, 23, 24, 15, 25, 26, 27,
+			18, 28, 29, 30, 21, 31, 32, 33, 24, 34, 35, 36, 27, 37, 38, 39,
+			30, 40, 41, 0, 33, 42, 43, 4, 36, 44, 45, 8, 39, 46, 47, 12,
+			/*body*/
+			12, 13, 14, 15, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+			15, 25, 26, 27, 51, 60, 61, 62, 55, 63, 64, 65, 59, 66, 67, 68,
+			27, 37, 38, 39, 62, 69, 70, 71, 65, 72, 73, 74, 68, 75, 76, 77,
+			39, 46, 47, 12, 71, 78, 79, 48, 74, 80, 81, 52, 77, 82, 83, 56,
+			56, 57, 58, 59, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+			59, 66, 67, 68, 87, 96, 97, 98, 91, 99, 100, 101, 95, 102, 103, 104,
+			68, 75, 76, 77, 98, 105, 106, 107, 101, 108, 109, 110, 104, 111, 112, 113,
+			77, 82, 83, 56, 107, 114, 115, 84, 110, 116, 117, 88, 113, 118, 119, 92,
+			/*handle*/
+			120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135,
+			123, 136, 137, 120, 127, 138, 139, 124, 131, 140, 141, 128, 135, 142, 143, 132,
+			132, 133, 134, 135, 144, 145, 146, 147, 148, 149, 150, 151, 68, 152, 153, 154,
+			135, 142, 143, 132, 147, 155, 156, 144, 151, 157, 158, 148, 154, 159, 160, 68,
+			/*spout*/
+			161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176,
+			164, 177, 178, 161, 168, 179, 180, 165, 172, 181, 182, 169, 176, 183, 184, 173,
+			173, 174, 175, 176, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196,
+			176, 183, 184, 173, 188, 197, 198, 185, 192, 199, 200, 189, 196, 201, 202, 193,
+			/*lid*/
+			203, 203, 203, 203, 204, 205, 206, 207, 208, 208, 208, 208, 209, 210, 211, 212,
+			203, 203, 203, 203, 207, 213, 214, 215, 208, 208, 208, 208, 212, 216, 217, 218,
+			203, 203, 203, 203, 215, 219, 220, 221, 208, 208, 208, 208, 218, 222, 223, 224,
+			203, 203, 203, 203, 221, 225, 226, 204, 208, 208, 208, 208, 224, 227, 228, 209,
+			209, 210, 211, 212, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240,
+			212, 216, 217, 218, 232, 241, 242, 243, 236, 244, 245, 246, 240, 247, 248, 249,
+			218, 222, 223, 224, 243, 250, 251, 252, 246, 253, 254, 255, 249, 256, 257, 258,
+			224, 227, 228, 209, 252, 259, 260, 229, 255, 261, 262, 233, 258, 263, 264, 237,
+			/*bottom*/
+			265, 265, 265, 265, 266, 267, 268, 269, 270, 271, 272, 273, 92, 119, 118, 113,
+			265, 265, 265, 265, 269, 274, 275, 276, 273, 277, 278, 279, 113, 112, 111, 104,
+			265, 265, 265, 265, 276, 280, 281, 282, 279, 283, 284, 285, 104, 103, 102, 95,
+			265, 265, 265, 265, 282, 286, 287, 266, 285, 288, 289, 270, 95, 94, 93, 92
+		];
+
+		const teapotVertices = [
+			1.4, 0, 2.4,
+			1.4, - 0.784, 2.4,
+			0.784, - 1.4, 2.4,
+			0, - 1.4, 2.4,
+			1.3375, 0, 2.53125,
+			1.3375, - 0.749, 2.53125,
+			0.749, - 1.3375, 2.53125,
+			0, - 1.3375, 2.53125,
+			1.4375, 0, 2.53125,
+			1.4375, - 0.805, 2.53125,
+			0.805, - 1.4375, 2.53125,
+			0, - 1.4375, 2.53125,
+			1.5, 0, 2.4,
+			1.5, - 0.84, 2.4,
+			0.84, - 1.5, 2.4,
+			0, - 1.5, 2.4,
+			- 0.784, - 1.4, 2.4,
+			- 1.4, - 0.784, 2.4,
+			- 1.4, 0, 2.4,
+			- 0.749, - 1.3375, 2.53125,
+			- 1.3375, - 0.749, 2.53125,
+			- 1.3375, 0, 2.53125,
+			- 0.805, - 1.4375, 2.53125,
+			- 1.4375, - 0.805, 2.53125,
+			- 1.4375, 0, 2.53125,
+			- 0.84, - 1.5, 2.4,
+			- 1.5, - 0.84, 2.4,
+			- 1.5, 0, 2.4,
+			- 1.4, 0.784, 2.4,
+			- 0.784, 1.4, 2.4,
+			0, 1.4, 2.4,
+			- 1.3375, 0.749, 2.53125,
+			- 0.749, 1.3375, 2.53125,
+			0, 1.3375, 2.53125,
+			- 1.4375, 0.805, 2.53125,
+			- 0.805, 1.4375, 2.53125,
+			0, 1.4375, 2.53125,
+			- 1.5, 0.84, 2.4,
+			- 0.84, 1.5, 2.4,
+			0, 1.5, 2.4,
+			0.784, 1.4, 2.4,
+			1.4, 0.784, 2.4,
+			0.749, 1.3375, 2.53125,
+			1.3375, 0.749, 2.53125,
+			0.805, 1.4375, 2.53125,
+			1.4375, 0.805, 2.53125,
+			0.84, 1.5, 2.4,
+			1.5, 0.84, 2.4,
+			1.75, 0, 1.875,
+			1.75, - 0.98, 1.875,
+			0.98, - 1.75, 1.875,
+			0, - 1.75, 1.875,
+			2, 0, 1.35,
+			2, - 1.12, 1.35,
+			1.12, - 2, 1.35,
+			0, - 2, 1.35,
+			2, 0, 0.9,
+			2, - 1.12, 0.9,
+			1.12, - 2, 0.9,
+			0, - 2, 0.9,
+			- 0.98, - 1.75, 1.875,
+			- 1.75, - 0.98, 1.875,
+			- 1.75, 0, 1.875,
+			- 1.12, - 2, 1.35,
+			- 2, - 1.12, 1.35,
+			- 2, 0, 1.35,
+			- 1.12, - 2, 0.9,
+			- 2, - 1.12, 0.9,
+			- 2, 0, 0.9,
+			- 1.75, 0.98, 1.875,
+			- 0.98, 1.75, 1.875,
+			0, 1.75, 1.875,
+			- 2, 1.12, 1.35,
+			- 1.12, 2, 1.35,
+			0, 2, 1.35,
+			- 2, 1.12, 0.9,
+			- 1.12, 2, 0.9,
+			0, 2, 0.9,
+			0.98, 1.75, 1.875,
+			1.75, 0.98, 1.875,
+			1.12, 2, 1.35,
+			2, 1.12, 1.35,
+			1.12, 2, 0.9,
+			2, 1.12, 0.9,
+			2, 0, 0.45,
+			2, - 1.12, 0.45,
+			1.12, - 2, 0.45,
+			0, - 2, 0.45,
+			1.5, 0, 0.225,
+			1.5, - 0.84, 0.225,
+			0.84, - 1.5, 0.225,
+			0, - 1.5, 0.225,
+			1.5, 0, 0.15,
+			1.5, - 0.84, 0.15,
+			0.84, - 1.5, 0.15,
+			0, - 1.5, 0.15,
+			- 1.12, - 2, 0.45,
+			- 2, - 1.12, 0.45,
+			- 2, 0, 0.45,
+			- 0.84, - 1.5, 0.225,
+			- 1.5, - 0.84, 0.225,
+			- 1.5, 0, 0.225,
+			- 0.84, - 1.5, 0.15,
+			- 1.5, - 0.84, 0.15,
+			- 1.5, 0, 0.15,
+			- 2, 1.12, 0.45,
+			- 1.12, 2, 0.45,
+			0, 2, 0.45,
+			- 1.5, 0.84, 0.225,
+			- 0.84, 1.5, 0.225,
+			0, 1.5, 0.225,
+			- 1.5, 0.84, 0.15,
+			- 0.84, 1.5, 0.15,
+			0, 1.5, 0.15,
+			1.12, 2, 0.45,
+			2, 1.12, 0.45,
+			0.84, 1.5, 0.225,
+			1.5, 0.84, 0.225,
+			0.84, 1.5, 0.15,
+			1.5, 0.84, 0.15,
+			- 1.6, 0, 2.025,
+			- 1.6, - 0.3, 2.025,
+			- 1.5, - 0.3, 2.25,
+			- 1.5, 0, 2.25,
+			- 2.3, 0, 2.025,
+			- 2.3, - 0.3, 2.025,
+			- 2.5, - 0.3, 2.25,
+			- 2.5, 0, 2.25,
+			- 2.7, 0, 2.025,
+			- 2.7, - 0.3, 2.025,
+			- 3, - 0.3, 2.25,
+			- 3, 0, 2.25,
+			- 2.7, 0, 1.8,
+			- 2.7, - 0.3, 1.8,
+			- 3, - 0.3, 1.8,
+			- 3, 0, 1.8,
+			- 1.5, 0.3, 2.25,
+			- 1.6, 0.3, 2.025,
+			- 2.5, 0.3, 2.25,
+			- 2.3, 0.3, 2.025,
+			- 3, 0.3, 2.25,
+			- 2.7, 0.3, 2.025,
+			- 3, 0.3, 1.8,
+			- 2.7, 0.3, 1.8,
+			- 2.7, 0, 1.575,
+			- 2.7, - 0.3, 1.575,
+			- 3, - 0.3, 1.35,
+			- 3, 0, 1.35,
+			- 2.5, 0, 1.125,
+			- 2.5, - 0.3, 1.125,
+			- 2.65, - 0.3, 0.9375,
+			- 2.65, 0, 0.9375,
+			- 2, - 0.3, 0.9,
+			- 1.9, - 0.3, 0.6,
+			- 1.9, 0, 0.6,
+			- 3, 0.3, 1.35,
+			- 2.7, 0.3, 1.575,
+			- 2.65, 0.3, 0.9375,
+			- 2.5, 0.3, 1.125,
+			- 1.9, 0.3, 0.6,
+			- 2, 0.3, 0.9,
+			1.7, 0, 1.425,
+			1.7, - 0.66, 1.425,
+			1.7, - 0.66, 0.6,
+			1.7, 0, 0.6,
+			2.6, 0, 1.425,
+			2.6, - 0.66, 1.425,
+			3.1, - 0.66, 0.825,
+			3.1, 0, 0.825,
+			2.3, 0, 2.1,
+			2.3, - 0.25, 2.1,
+			2.4, - 0.25, 2.025,
+			2.4, 0, 2.025,
+			2.7, 0, 2.4,
+			2.7, - 0.25, 2.4,
+			3.3, - 0.25, 2.4,
+			3.3, 0, 2.4,
+			1.7, 0.66, 0.6,
+			1.7, 0.66, 1.425,
+			3.1, 0.66, 0.825,
+			2.6, 0.66, 1.425,
+			2.4, 0.25, 2.025,
+			2.3, 0.25, 2.1,
+			3.3, 0.25, 2.4,
+			2.7, 0.25, 2.4,
+			2.8, 0, 2.475,
+			2.8, - 0.25, 2.475,
+			3.525, - 0.25, 2.49375,
+			3.525, 0, 2.49375,
+			2.9, 0, 2.475,
+			2.9, - 0.15, 2.475,
+			3.45, - 0.15, 2.5125,
+			3.45, 0, 2.5125,
+			2.8, 0, 2.4,
+			2.8, - 0.15, 2.4,
+			3.2, - 0.15, 2.4,
+			3.2, 0, 2.4,
+			3.525, 0.25, 2.49375,
+			2.8, 0.25, 2.475,
+			3.45, 0.15, 2.5125,
+			2.9, 0.15, 2.475,
+			3.2, 0.15, 2.4,
+			2.8, 0.15, 2.4,
+			0, 0, 3.15,
+			0.8, 0, 3.15,
+			0.8, - 0.45, 3.15,
+			0.45, - 0.8, 3.15,
+			0, - 0.8, 3.15,
+			0, 0, 2.85,
+			0.2, 0, 2.7,
+			0.2, - 0.112, 2.7,
+			0.112, - 0.2, 2.7,
+			0, - 0.2, 2.7,
+			- 0.45, - 0.8, 3.15,
+			- 0.8, - 0.45, 3.15,
+			- 0.8, 0, 3.15,
+			- 0.112, - 0.2, 2.7,
+			- 0.2, - 0.112, 2.7,
+			- 0.2, 0, 2.7,
+			- 0.8, 0.45, 3.15,
+			- 0.45, 0.8, 3.15,
+			0, 0.8, 3.15,
+			- 0.2, 0.112, 2.7,
+			- 0.112, 0.2, 2.7,
+			0, 0.2, 2.7,
+			0.45, 0.8, 3.15,
+			0.8, 0.45, 3.15,
+			0.112, 0.2, 2.7,
+			0.2, 0.112, 2.7,
+			0.4, 0, 2.55,
+			0.4, - 0.224, 2.55,
+			0.224, - 0.4, 2.55,
+			0, - 0.4, 2.55,
+			1.3, 0, 2.55,
+			1.3, - 0.728, 2.55,
+			0.728, - 1.3, 2.55,
+			0, - 1.3, 2.55,
+			1.3, 0, 2.4,
+			1.3, - 0.728, 2.4,
+			0.728, - 1.3, 2.4,
+			0, - 1.3, 2.4,
+			- 0.224, - 0.4, 2.55,
+			- 0.4, - 0.224, 2.55,
+			- 0.4, 0, 2.55,
+			- 0.728, - 1.3, 2.55,
+			- 1.3, - 0.728, 2.55,
+			- 1.3, 0, 2.55,
+			- 0.728, - 1.3, 2.4,
+			- 1.3, - 0.728, 2.4,
+			- 1.3, 0, 2.4,
+			- 0.4, 0.224, 2.55,
+			- 0.224, 0.4, 2.55,
+			0, 0.4, 2.55,
+			- 1.3, 0.728, 2.55,
+			- 0.728, 1.3, 2.55,
+			0, 1.3, 2.55,
+			- 1.3, 0.728, 2.4,
+			- 0.728, 1.3, 2.4,
+			0, 1.3, 2.4,
+			0.224, 0.4, 2.55,
+			0.4, 0.224, 2.55,
+			0.728, 1.3, 2.55,
+			1.3, 0.728, 2.55,
+			0.728, 1.3, 2.4,
+			1.3, 0.728, 2.4,
+			0, 0, 0,
+			1.425, 0, 0,
+			1.425, 0.798, 0,
+			0.798, 1.425, 0,
+			0, 1.425, 0,
+			1.5, 0, 0.075,
+			1.5, 0.84, 0.075,
+			0.84, 1.5, 0.075,
+			0, 1.5, 0.075,
+			- 0.798, 1.425, 0,
+			- 1.425, 0.798, 0,
+			- 1.425, 0, 0,
+			- 0.84, 1.5, 0.075,
+			- 1.5, 0.84, 0.075,
+			- 1.5, 0, 0.075,
+			- 1.425, - 0.798, 0,
+			- 0.798, - 1.425, 0,
+			0, - 1.425, 0,
+			- 1.5, - 0.84, 0.075,
+			- 0.84, - 1.5, 0.075,
+			0, - 1.5, 0.075,
+			0.798, - 1.425, 0,
+			1.425, - 0.798, 0,
+			0.84, - 1.5, 0.075,
+			1.5, - 0.84, 0.075
+		];
+
+		super();
+
+		// number of segments per patch
+		segments = Math.max( 2, Math.floor( segments ) );
+
+		// Jim Blinn scaled the teapot down in size by about 1.3 for
+		// some rendering tests. He liked the new proportions that he kept
+		// the data in this form. The model was distributed with these new
+		// proportions and became the norm. Trivia: comparing images of the
+		// real teapot and the computer model, the ratio for the bowl of the
+		// real teapot is more like 1.25, but since 1.3 is the traditional
+		// value given, we use it here.
+		const blinnScale = 1.3;
+
+		// scale the size to be the real scaling factor
+		const maxHeight = 3.15 * ( blinn ? 1 : blinnScale );
+
+		const maxHeight2 = maxHeight / 2;
+		const trueSize = size / maxHeight2;
+
+		// Number of elements depends on what is needed. Subtract degenerate
+		// triangles at tip of bottom and lid out in advance.
+		let numTriangles = bottom ? ( 8 * segments - 4 ) * segments : 0;
+		numTriangles += lid ? ( 16 * segments - 4 ) * segments : 0;
+		numTriangles += body ? 40 * segments * segments : 0;
+
+		const indices = new Uint32Array( numTriangles * 3 );
+
+		let numVertices = bottom ? 4 : 0;
+		numVertices += lid ? 8 : 0;
+		numVertices += body ? 20 : 0;
+		numVertices *= ( segments + 1 ) * ( segments + 1 );
+
+		const vertices = new Float32Array( numVertices * 3 );
+		const normals = new Float32Array( numVertices * 3 );
+		const uvs = new Float32Array( numVertices * 2 );
+
+		// Bezier form
+		const ms = new Matrix4();
+		ms.set(
+			- 1.0, 3.0, - 3.0, 1.0,
+			3.0, - 6.0, 3.0, 0.0,
+			- 3.0, 3.0, 0.0, 0.0,
+			1.0, 0.0, 0.0, 0.0 );
+
+		const g = [];
+
+		const sp = [];
+		const tp = [];
+		const dsp = [];
+		const dtp = [];
+
+		// M * G * M matrix, sort of see
+		// http://www.cs.helsinki.fi/group/goa/mallinnus/curves/surfaces.html
+		const mgm = [];
+
+		const vert = [];
+		const sdir = [];
+		const tdir = [];
+
+		const norm = new Vector3();
+
+		let tcoord;
+
+		let sval;
+		let tval;
+		let p;
+		let dsval = 0;
+		let dtval = 0;
+
+		const normOut = new Vector3();
+
+		const gmx = new Matrix4();
+		const tmtx = new Matrix4();
+
+		const vsp = new Vector4();
+		const vtp = new Vector4();
+		const vdsp = new Vector4();
+		const vdtp = new Vector4();
+
+		const vsdir = new Vector3();
+		const vtdir = new Vector3();
+
+		const mst = ms.clone();
+		mst.transpose();
+
+		// internal function: test if triangle has any matching vertices;
+		// if so, don't save triangle, since it won't display anything.
+		const notDegenerate = ( vtx1, vtx2, vtx3 ) => // if any vertex matches, return false
+			! ( ( ( vertices[ vtx1 * 3 ] === vertices[ vtx2 * 3 ] ) &&
+					( vertices[ vtx1 * 3 + 1 ] === vertices[ vtx2 * 3 + 1 ] ) &&
+					( vertices[ vtx1 * 3 + 2 ] === vertices[ vtx2 * 3 + 2 ] ) ) ||
+					( ( vertices[ vtx1 * 3 ] === vertices[ vtx3 * 3 ] ) &&
+					( vertices[ vtx1 * 3 + 1 ] === vertices[ vtx3 * 3 + 1 ] ) &&
+					( vertices[ vtx1 * 3 + 2 ] === vertices[ vtx3 * 3 + 2 ] ) ) || ( vertices[ vtx2 * 3 ] === vertices[ vtx3 * 3 ] ) &&
+					( vertices[ vtx2 * 3 + 1 ] === vertices[ vtx3 * 3 + 1 ] ) &&
+					( vertices[ vtx2 * 3 + 2 ] === vertices[ vtx3 * 3 + 2 ] ) );
+
+
+		for ( let i = 0; i < 3; i ++ ) {
+
+			mgm[ i ] = new Matrix4();
+
+		}
+
+		const minPatches = body ? 0 : 20;
+		const maxPatches = bottom ? 32 : 28;
+
+		const vertPerRow = segments + 1;
+
+		let surfCount = 0;
+
+		let vertCount = 0;
+		let normCount = 0;
+		let uvCount = 0;
+
+		let indexCount = 0;
+
+		for ( let surf = minPatches; surf < maxPatches; surf ++ ) {
+
+			// lid is in the middle of the data, patches 20-27,
+			// so ignore it for this part of the loop if the lid is not desired
+			if ( lid || ( surf < 20 || surf >= 28 ) ) {
+
+				// get M * G * M matrix for x,y,z
+				for ( let i = 0; i < 3; i ++ ) {
+
+					// get control patches
+					for ( let r = 0; r < 4; r ++ ) {
+
+						for ( let c = 0; c < 4; c ++ ) {
+
+							// transposed
+							g[ c * 4 + r ] = teapotVertices[ teapotPatches[ surf * 16 + r * 4 + c ] * 3 + i ];
+
+							// is the lid to be made larger, and is this a point on the lid
+							// that is X or Y?
+							if ( fitLid && ( surf >= 20 && surf < 28 ) && ( i !== 2 ) ) {
+
+								// increase XY size by 7.7%, found empirically. I don't
+								// increase Z so that the teapot will continue to fit in the
+								// space -1 to 1 for Y (Y is up for the final model).
+								g[ c * 4 + r ] *= 1.077;
+
+							}
+
+							// Blinn "fixed" the teapot by dividing Z by blinnScale, and that's the
+							// data we now use. The original teapot is taller. Fix it:
+							if ( ! blinn && ( i === 2 ) ) {
+
+								g[ c * 4 + r ] *= blinnScale;
+
+							}
+
+						}
+
+					}
+
+					gmx.set( g[ 0 ], g[ 1 ], g[ 2 ], g[ 3 ], g[ 4 ], g[ 5 ], g[ 6 ], g[ 7 ], g[ 8 ], g[ 9 ], g[ 10 ], g[ 11 ], g[ 12 ], g[ 13 ], g[ 14 ], g[ 15 ] );
+
+					tmtx.multiplyMatrices( gmx, ms );
+					mgm[ i ].multiplyMatrices( mst, tmtx );
+
+				}
+
+				// step along, get points, and output
+				for ( let sstep = 0; sstep <= segments; sstep ++ ) {
+
+					const s = sstep / segments;
+
+					for ( let tstep = 0; tstep <= segments; tstep ++ ) {
+
+						const t = tstep / segments;
+
+						// point from basis
+						// get power vectors and their derivatives
+						for ( p = 4, sval = tval = 1.0; p --; ) {
+
+							sp[ p ] = sval;
+							tp[ p ] = tval;
+							sval *= s;
+							tval *= t;
+
+							if ( p === 3 ) {
+
+								dsp[ p ] = dtp[ p ] = 0.0;
+								dsval = dtval = 1.0;
+
+							} else {
+
+								dsp[ p ] = dsval * ( 3 - p );
+								dtp[ p ] = dtval * ( 3 - p );
+								dsval *= s;
+								dtval *= t;
+
+							}
+
+						}
+
+						vsp.fromArray( sp );
+						vtp.fromArray( tp );
+						vdsp.fromArray( dsp );
+						vdtp.fromArray( dtp );
+
+						// do for x,y,z
+						for ( let i = 0; i < 3; i ++ ) {
+
+							// multiply power vectors times matrix to get value
+							tcoord = vsp.clone();
+							tcoord.applyMatrix4( mgm[ i ] );
+							vert[ i ] = tcoord.dot( vtp );
+
+							// get s and t tangent vectors
+							tcoord = vdsp.clone();
+							tcoord.applyMatrix4( mgm[ i ] );
+							sdir[ i ] = tcoord.dot( vtp );
+
+							tcoord = vsp.clone();
+							tcoord.applyMatrix4( mgm[ i ] );
+							tdir[ i ] = tcoord.dot( vdtp );
+
+						}
+
+						// find normal
+						vsdir.fromArray( sdir );
+						vtdir.fromArray( tdir );
+						norm.crossVectors( vtdir, vsdir );
+						norm.normalize();
+
+						// if X and Z length is 0, at the cusp, so point the normal up or down, depending on patch number
+						if ( vert[ 0 ] === 0 && vert[ 1 ] === 0 ) {
+
+							// if above the middle of the teapot, normal points up, else down
+							normOut.set( 0, vert[ 2 ] > maxHeight2 ? 1 : - 1, 0 );
+
+						} else {
+
+							// standard output: rotate on X axis
+							normOut.set( norm.x, norm.z, - norm.y );
+
+						}
+
+						// store it all
+						vertices[ vertCount ++ ] = trueSize * vert[ 0 ];
+						vertices[ vertCount ++ ] = trueSize * ( vert[ 2 ] - maxHeight2 );
+						vertices[ vertCount ++ ] = - trueSize * vert[ 1 ];
+
+						normals[ normCount ++ ] = normOut.x;
+						normals[ normCount ++ ] = normOut.y;
+						normals[ normCount ++ ] = normOut.z;
+
+						uvs[ uvCount ++ ] = 1 - t;
+						uvs[ uvCount ++ ] = 1 - s;
+
+					}
+
+				}
+
+				// save the faces
+				for ( let sstep = 0; sstep < segments; sstep ++ ) {
+
+					for ( let tstep = 0; tstep < segments; tstep ++ ) {
+
+						const v1 = surfCount * vertPerRow * vertPerRow + sstep * vertPerRow + tstep;
+						const v2 = v1 + 1;
+						const v3 = v2 + vertPerRow;
+						const v4 = v1 + vertPerRow;
+
+						// Normals and UVs cannot be shared. Without clone(), you can see the consequences
+						// of sharing if you call geometry.applyMatrix4( matrix ).
+						if ( notDegenerate( v1, v2, v3 ) ) {
+
+							indices[ indexCount ++ ] = v1;
+							indices[ indexCount ++ ] = v2;
+							indices[ indexCount ++ ] = v3;
+
+						}
+
+						if ( notDegenerate( v1, v3, v4 ) ) {
+
+							indices[ indexCount ++ ] = v1;
+							indices[ indexCount ++ ] = v3;
+							indices[ indexCount ++ ] = v4;
+
+						}
+
+					}
+
+				}
+
+				// increment only if a surface was used
+				surfCount ++;
+
+			}
+
+		}
+
+		this.setIndex( new BufferAttribute( indices, 1 ) );
+		this.setAttribute( 'position', new BufferAttribute( vertices, 3 ) );
+		this.setAttribute( 'normal', new BufferAttribute( normals, 3 ) );
+		this.setAttribute( 'uv', new BufferAttribute( uvs, 2 ) );
+
+		this.computeBoundingSphere();
+
+	}
+
+}
+
+export { TeapotGeometry };