cosmos 3.0.1 → 3.1.0

data/lib/cosmos/tools/tlm_grapher/data_objects/data_object.rb

@@ -1,177 +1,177 @@
-# encoding: ascii-8bit
-
-# Copyright 2014 Ball Aerospace & Technologies Corp.
-# All Rights Reserved.
-#
-# This program is free software; you can modify and/or redistribute it
-# under the terms of the GNU General Public License
-# as published by the Free Software Foundation; version 3 with
-# attribution addendums as found in the LICENSE.txt
-
-require 'cosmos'
-
-module Cosmos
-
-  # Represents a data object in a tabbed plots definition
-  # Designed for use as a base class for custom data objects
-  class DataObject
-
-    # List of colors to use
-    COLOR_LIST = %w(blue red green darkorange gold purple hotpink lime cornflowerblue brown coral crimson indigo tan lightblue cyan peru)
-
-    # Used to create large arrays to prevent memory thrashing with large objects
-    DEFAULT_ARRAY_SIZE = 100000
-
-    # Percent of max seconds saved to achieve hystersis on pruning to
-    # reduce memory thrashing
-    PRUNE_HYSTERISIS_PERCENTAGE = 0.10
-
-    # Plot holding this data object (subclass of Plot)
-    attr_accessor :plot
-
-    # Name of this data object (string or nil)
-    attr_writer :name
-
-    # Max number of data points saved (integer)
-    attr_reader :max_points_saved
-
-    # Type of data object (string)
-    attr_accessor :data_object_type
-
-    # Error associated with this data_object (Exception)
-    attr_accessor :error
-
-    # Color currently being used to draw the line (string)
-    attr_accessor :color
-
-    # Assigned Color of the line (string or nil for auto color choice)
-    attr_accessor :assigned_color
-
-    # This value is the first x value for this data object since reset() was called. It is stored here
-    # so it can be retrieved even after x values have been pruned.
-    attr_accessor :first_x_value
-
-    def initialize
-      @plot = nil
-      @max_points_saved = nil
-      @prune_hysterisis = nil
-      # Start this value at the max float so any x_value will be less than it
-      @first_x_value = Float::MAX
-      @error = nil
-      @assigned_color = nil
-      @color = COLOR_LIST[0]
-
-      # Type is classname without DataObject
-      @data_object_type = self.class.to_s[0..-11].upcase
-      @data_object_type = @data_object_type.split("::")[-1] # remove Cosmos:: if necessary
-    end # def initialize
-
-    # Returns the configuration lines used to create this data object
-    def configuration_string
-      string  = "    DATA_OBJECT #{@data_object_type}\n"
-      string << "      COLOR #{@assigned_color}\n" if @assigned_color
-      string
-    end # def configuration_string
-
-    # Handles data object specific keywords
-    def handle_keyword(parser, keyword, parameters)
-      case keyword
-      when 'COLOR'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "COLOR <Color Name>")
-        @assigned_color = parameters[0].downcase
-        @color = @assigned_color
-      else
-        raise ArgumentError, "Unknown keyword received by #{self.class}: #{keyword}"
-      end
-    end # def handle_keyword
-
-    # Returns the packets processed by this data object as an array of
-    # [target_name, packet_name] pairs
-    def processed_packets
-      raise "processed_packets must be defined by class #{self.class}"
-    end
-
-    # Processes a packet associated with this data object
-    #
-    # @param packet [Packet] The packet to process
-    # @param count [Integer] Count which increments for each packet received by
-    #   the higher level process
-    def process_packet(packet, count)
-      raise "process_packet must be defined by class #{self.class}"
-    end
-
-    # Resets the data object's data (everything that is not configuration)
-    def reset
-      @error = nil
-      #Reset this value at the max float so any x_value will be less than it
-      @first_x_value = Float::MAX
-    end
-
-    # Supplies text that should be appended to the popup string on mousing over the specified
-    # x value
-    def popup_modifier(x_value)
-      #The default class returns an empty value
-      return ""
-    end
-
-    # Exports the data object's data as an array of arrays.  Each inner array
-    # is a column of the output.
-    def export
-      raise "export must be defined by class #{self.class}"
-    end
-
-    # Creates a copy of the data object with settings but without data
-    def copy
-      data_object = self.class.new
-      data_object.assigned_color = @assigned_color.clone if @assigned_color
-      data_object.color = @color.clone
-      data_object.max_points_saved = @max_points_saved
-      data_object
-    end
-
-    # Edits the data object by updating its settings from another data object
-    def edit(editted_data_object)
-      @assigned_color = editted_data_object.assigned_color
-      @color = editted_data_object.color
-      self.max_points_saved = editted_data_object.max_points_saved
-    end
-
-    # Indicates if the changes made to the data object are safe to perform without reseting
-    # its data
-    #
-    # @param edited_data_object [DataObject] The data object which was edited
-    def edit_safe?(edited_data_object)
-      true
-    end
-
-    # Returns the name of this data object
-    def name
-      'Unknown'
-    end
-
-    # Sets the maximum number of points saved
-    def max_points_saved=(new_max_points_saved)
-      @max_points_saved = new_max_points_saved
-      if @max_points_saved
-        @prune_hysterisis  = (@max_points_saved.to_f * PRUNE_HYSTERISIS_PERCENTAGE).to_i
-        @prune_hysterisis = 0 if @prune_hysterisis < 0
-        prune_to_max_points_saved(true) # force prune
-      else
-        @prune_hysterisis  = nil
-      end
-    end
-
-    # Prunes data to max_points_saved
-    #
-    # @param force_prune [Boolean] Whether to prune no matter if the
-    #   PRUNE_HYSTERISIS_PERCENTAGE is met. Set to true if the max_points_saved
-    #   is changed to ensure the total is within the new limit.
-    def prune_to_max_points_saved(force_prune = false)
-      # Must be implemented by subclasses
-      return nil
-    end
-
-  end # class DataObject
-
-end # module Cosmos
+# encoding: ascii-8bit
+
+# Copyright 2014 Ball Aerospace & Technologies Corp.
+# All Rights Reserved.
+#
+# This program is free software; you can modify and/or redistribute it
+# under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 3 with
+# attribution addendums as found in the LICENSE.txt
+
+require 'cosmos'
+
+module Cosmos
+
+  # Represents a data object in a tabbed plots definition
+  # Designed for use as a base class for custom data objects
+  class DataObject
+
+    # List of colors to use
+    COLOR_LIST = %w(blue red green darkorange gold purple hotpink lime cornflowerblue brown coral crimson indigo tan lightblue cyan peru)
+
+    # Used to create large arrays to prevent memory thrashing with large objects
+    DEFAULT_ARRAY_SIZE = 100000
+
+    # Percent of max seconds saved to achieve hystersis on pruning to
+    # reduce memory thrashing
+    PRUNE_HYSTERISIS_PERCENTAGE = 0.10
+
+    # Plot holding this data object (subclass of Plot)
+    attr_accessor :plot
+
+    # Name of this data object (string or nil)
+    attr_writer :name
+
+    # Max number of data points saved (integer)
+    attr_reader :max_points_saved
+
+    # Type of data object (string)
+    attr_accessor :data_object_type
+
+    # Error associated with this data_object (Exception)
+    attr_accessor :error
+
+    # Color currently being used to draw the line (string)
+    attr_accessor :color
+
+    # Assigned Color of the line (string or nil for auto color choice)
+    attr_accessor :assigned_color
+
+    # This value is the first x value for this data object since reset() was called. It is stored here
+    # so it can be retrieved even after x values have been pruned.
+    attr_accessor :first_x_value
+
+    def initialize
+      @plot = nil
+      @max_points_saved = nil
+      @prune_hysterisis = nil
+      # Start this value at the max float so any x_value will be less than it
+      @first_x_value = Float::MAX
+      @error = nil
+      @assigned_color = nil
+      @color = COLOR_LIST[0]
+
+      # Type is classname without DataObject
+      @data_object_type = self.class.to_s[0..-11].upcase
+      @data_object_type = @data_object_type.split("::")[-1] # remove Cosmos:: if necessary
+    end # def initialize
+
+    # Returns the configuration lines used to create this data object
+    def configuration_string
+      string  = "    DATA_OBJECT #{@data_object_type}\n"
+      string << "      COLOR #{@assigned_color}\n" if @assigned_color
+      string
+    end # def configuration_string
+
+    # Handles data object specific keywords
+    def handle_keyword(parser, keyword, parameters)
+      case keyword
+      when 'COLOR'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "COLOR <Color Name>")
+        @assigned_color = parameters[0].downcase
+        @color = @assigned_color
+      else
+        raise ArgumentError, "Unknown keyword received by #{self.class}: #{keyword}"
+      end
+    end # def handle_keyword
+
+    # Returns the packets processed by this data object as an array of
+    # [target_name, packet_name] pairs
+    def processed_packets
+      raise "processed_packets must be defined by class #{self.class}"
+    end
+
+    # Processes a packet associated with this data object
+    #
+    # @param packet [Packet] The packet to process
+    # @param count [Integer] Count which increments for each packet received by
+    #   the higher level process
+    def process_packet(packet, count)
+      raise "process_packet must be defined by class #{self.class}"
+    end
+
+    # Resets the data object's data (everything that is not configuration)
+    def reset
+      @error = nil
+      #Reset this value at the max float so any x_value will be less than it
+      @first_x_value = Float::MAX
+    end
+
+    # Supplies text that should be appended to the popup string on mousing over the specified
+    # x value
+    def popup_modifier(x_value)
+      #The default class returns an empty value
+      return ""
+    end
+
+    # Exports the data object's data as an array of arrays.  Each inner array
+    # is a column of the output.
+    def export
+      raise "export must be defined by class #{self.class}"
+    end
+
+    # Creates a copy of the data object with settings but without data
+    def copy
+      data_object = self.class.new
+      data_object.assigned_color = @assigned_color.clone if @assigned_color
+      data_object.color = @color.clone
+      data_object.max_points_saved = @max_points_saved
+      data_object
+    end
+
+    # Edits the data object by updating its settings from another data object
+    def edit(editted_data_object)
+      @assigned_color = editted_data_object.assigned_color
+      @color = editted_data_object.color
+      self.max_points_saved = editted_data_object.max_points_saved
+    end
+
+    # Indicates if the changes made to the data object are safe to perform without reseting
+    # its data
+    #
+    # @param edited_data_object [DataObject] The data object which was edited
+    def edit_safe?(edited_data_object)
+      true
+    end
+
+    # Returns the name of this data object
+    def name
+      'Unknown'
+    end
+
+    # Sets the maximum number of points saved
+    def max_points_saved=(new_max_points_saved)
+      @max_points_saved = new_max_points_saved
+      if @max_points_saved
+        @prune_hysterisis  = (@max_points_saved.to_f * PRUNE_HYSTERISIS_PERCENTAGE).to_i
+        @prune_hysterisis = 0 if @prune_hysterisis < 0
+        prune_to_max_points_saved(true) # force prune
+      else
+        @prune_hysterisis  = nil
+      end
+    end
+
+    # Prunes data to max_points_saved
+    #
+    # @param force_prune [Boolean] Whether to prune no matter if the
+    #   PRUNE_HYSTERISIS_PERCENTAGE is met. Set to true if the max_points_saved
+    #   is changed to ensure the total is within the new limit.
+    def prune_to_max_points_saved(force_prune = false)
+      # Must be implemented by subclasses
+      return nil
+    end
+
+  end # class DataObject
+
+end # module Cosmos

data/lib/cosmos/tools/tlm_grapher/data_objects/housekeeping_data_object.rb

@@ -1,409 +1,412 @@
-# encoding: ascii-8bit
-
-# Copyright 2014 Ball Aerospace & Technologies Corp.
-# All Rights Reserved.
-#
-# This program is free software; you can modify and/or redistribute it
-# under the terms of the GNU General Public License
-# as published by the Free Software Foundation; version 3 with
-# attribution addendums as found in the LICENSE.txt
-
-require 'cosmos'
-require 'cosmos/tools/tlm_grapher/data_objects/linegraph_data_object'
-
-module Cosmos
-
-  # Represents a data object on a line graph for a housekeeping telemetry item
-  class HousekeepingDataObject < LinegraphDataObject
-
-    # Value Types
-    VALUE_TYPES = [:RAW, :CONVERTED]
-
-    # Analysis Types
-    ANALYSIS_TYPES = [:NONE, :DIFFERENCE, :WINDOWED_MEAN, :WINDOWED_MEAN_REMOVED, :STD_DEV, :ALLAN_DEV, :MAXIMUM, :MINIMUM, :PEAK_TO_PEAK]
-
-    # The housekeeping telemetry item's target name (string)
-    attr_reader :target_name
-
-    # The housekeeping telemetry item's packet name (string)
-    attr_reader :packet_name
-
-    # The housekeeping telemetry item's item name (string)
-    attr_reader :item_name
-
-    # The housekeeping telemetry item's time item name (string)
-    attr_accessor :time_item_name
-
-    # The housekeeping telemetry item's formatted time item name (string)
-    attr_accessor :formatted_time_item_name
-
-    # Type of data to collect - :RAW or :CONVERTED
-    attr_accessor :value_type
-
-    # The analysis to perform
-    attr_accessor :analysis
-
-    # The number of samples to use in the analysis (integer)
-    attr_reader :analysis_samples
-
-    # Automatically show limits line for telemetry item (true or false)
-    attr_reader :show_limits_lines
-
-    # Limits lines for telemetry item (array)
-    attr_accessor :limits_lines
-
-    # Create a new data object
-    def initialize
-      super()
-      @target_name = nil
-      @packet_name = nil
-      @item_name = nil
-      @time_item_name = nil
-      @formatted_time_item_name = nil
-      @value_type = :CONVERTED
-      @analysis = :NONE
-      @analysis_samples = 3
-      @show_limits_lines = false
-      @limits_lines = []
-      @num_samples_ahead = 1
-      @num_samples_behind = 1
-      @unprocessed_x_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
-      @unprocessed_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
-      @differenced_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
-    end # def initialize
-
-    # Returns the configuration lines used to create this data object
-    def configuration_string
-      string = super()
-      string << "      ITEM #{@target_name} #{@packet_name} #{@item_name}\n" if @target_name and @packet_name and @item_name
-      string << "      TIME_ITEM #{@time_item_name}\n" if @time_item_name
-      string << "      FORMATTED_TIME_ITEM #{@formatted_time_item_name}\n" if @formatted_time_item_name
-      string << "      VALUE_TYPE #{@value_type}\n"
-      string << "      ANALYSIS #{@analysis}\n"
-      string << "      ANALYSIS_SAMPLES #{@analysis_samples}\n"
-      string << "      SHOW_LIMITS_LINES #{@show_limits_lines.to_s.upcase}\n"
-      string
-    end # def configuration_string
-
-    # Handles data object specific keywords
-    def handle_keyword(parser, keyword, parameters)
-      case keyword
-      when 'ITEM'
-        # Expect 3 parameters
-        parser.verify_num_parameters(3, 3, "ITEM <Target Name> <Packet Name> <Item Name>")
-        set_item(parameters[0], parameters[1], parameters[2], true)
-
-      when 'TIME_ITEM'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "TIME_ITEM <Time Item Name>")
-        @time_item_name = parameters[0].upcase
-
-      when 'FORMATTED_TIME_ITEM'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "FORMATTED_TIME_ITEM <Formatted Time Item Name>")
-        @formatted_time_item_name = parameters[0].upcase
-
-      when 'VALUE_TYPE'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "VALUE_TYPE <RAW or CONVERTED>")
-        value_type = parameters[0].upcase.intern
-        if VALUE_TYPES.include?(value_type)
-          @value_type = value_type
-        else
-          raise ArgumentError, "Unknown VALUE_TYPE value: #{value_type}"
-        end
-
-      when 'ANALYSIS'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "ANALYSIS <Analysis Type>")
-        analysis = parameters[0].upcase.intern
-        if ANALYSIS_TYPES.include?(analysis)
-          @analysis = analysis
-        else
-          raise ArgumentError, "Unknown ANALYSIS value: #{analysis}"
-        end
-
-      when 'ANALYSIS_SAMPLES'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "ANALYSIS_SAMPLES <Number of Samples>")
-        self.analysis_samples = parameters[0].to_i
-
-      when 'SHOW_LIMITS_LINES'
-        # Expect 1 parameter
-        parser.verify_num_parameters(1, 1, "SHOW_LIMITS_LINES <TRUE or FALSE>")
-        self.show_limits_lines = ConfigParser.handle_true_false(parameters[0])
-
-      else
-        # Unknown keywords are passed to parent data object
-        super(parser, keyword, parameters)
-
-      end # case keyword
-
-    end # def handle_keyword
-
-    # Returns the packet processed by this data object
-    def processed_packets
-      if @target_name and @packet_name
-        [[@target_name, @packet_name]]
-      else
-        []
-      end
-    end
-
-    # (see DataObject#process_packet)
-    def process_packet(packet, count)
-      begin
-        # Retrieve x and y values from packet
-        x_value = packet.read(@time_item_name)
-        if @value_type == :RAW
-          y_value = packet.read(@item_name, :RAW)
-        else
-          y_value = packet.read(@item_name)
-        end
-        @formatted_x_values << packet.read(@formatted_time_item_name) if @formatted_time_item_name
-
-        upper_index  = nil
-        sample_index = nil
-        lower_index  = nil
-        if @analysis != :NONE
-          # Add to unprocessed data
-          @unprocessed_x_values << x_value
-          @unprocessed_y_values << y_value
-
-          # Calculate indexes into arrays
-          upper_index  = @unprocessed_y_values.length - 1
-          sample_index = upper_index - @num_samples_ahead
-          lower_index  = sample_index - @num_samples_behind
-        end
-
-        case @analysis
-        when :NONE
-          @x_values << x_value
-          @y_values << (y_value + @y_offset)
-          @plot.redraw_needed = true
-
-        when :DIFFERENCE, :ALLAN_DEV
-          if @unprocessed_y_values.length > 1
-            differenced_y_value = y_value - @unprocessed_y_values[-2]
-
-            if @analysis == :DIFFERENCE
-              @x_values << x_value
-              @y_values << (differenced_y_value + @y_offset)
-              @plot.redraw_needed = true
-            else # @analysis == :ALLAN_DEV
-              @differenced_y_values[upper_index] = differenced_y_value
-
-              if lower_index >= 1
-                data = @differenced_y_values[lower_index..upper_index]
-                @x_values << @unprocessed_x_values[sample_index]
-                @y_values << (Math.sqrt(data.squared.sum / (@analysis_samples * 2)) + @y_offset)
-                @plot.redraw_needed = true
-              end
-            end
-          end
-
-        when :WINDOWED_MEAN, :WINDOWED_MEAN_REMOVED, :STD_DEV
-          if @unprocessed_y_values.length >= @analysis_samples
-            # Isolate window of data
-            data = @unprocessed_y_values[lower_index..upper_index]
-
-            # Calculate windowed mean
-            mean = data.mean
-
-            case @analysis
-            when :WINDOWED_MEAN
-              @y_values << (mean + @y_offset)
-            when :WINDOWED_MEAN_REMOVED
-              @y_values << (@unprocessed_y_values[sample_index] - mean + @y_offset)
-            when :STD_DEV
-              data.map! {|value| value - mean}
-              @y_values << (Math.sqrt(data.squared.sum / (@analysis_samples - 1)) + @y_offset)
-            end
-            @x_values << @unprocessed_x_values[sample_index]
-            @plot.redraw_needed = true
-          end
-
-        when :MAXIMUM, :MINIMUM, :PEAK_TO_PEAK
-          if @unprocessed_y_values.length >= @analysis_samples
-            case @analysis
-            when :MAXIMUM
-              @y_values << (@unprocessed_y_values[lower_index..upper_index].max + @y_offset)
-            when :MINIMUM
-              @y_values << (@unprocessed_y_values[lower_index..upper_index].min + @y_offset)
-            else # :PEAK_TO_PEAK
-              @y_values << ((@unprocessed_y_values[lower_index..upper_index].max - @unprocessed_y_values[lower_index..upper_index].min) + @y_offset)
-            end
-            @x_values << @unprocessed_x_values[sample_index]
-            @plot.redraw_needed = true
-          end
-
-        end # case @analysis
-
-        # Make sure the data object's first x value is the smallest x value encountered during packet processing.
-        # This is the smallest x_value seen since reset() was called, i.e. it doesn't get deleted during pruning.
-        # We make the assumption that @x_values is ordered, so just check against its first value.
-        if (@x_values.length > 0) and (@x_values[0] < @first_x_value)
-          @first_x_value = @x_values[0]
-        end
-
-        # Prune Data
-        prune_to_max_points_saved()
-      rescue Exception => error
-        raise error if error.class == NoMemoryError
-        reset()
-        @error = error
-        @plot.redraw_needed = true
-        if error.is_a? TypeError
-          @error = FatalError.new("Telemetry point #{packet.target_name} #{packet.packet_name} #{@item_name} could not be displayed. This is most likely due to this telemetry point being a String which can't be represented on the graph. Remove the point from the list of telemetry items to cause this exception to go away.\n\n#{error}")
-        end
-      end
-    end # def process_packet
-
-    # Returns the name of this data object
-    def name
-      if @target_name and @packet_name and @item_name
-        if @analysis != :NONE
-          "#{@target_name} #{@packet_name} #{@item_name} (#{@analysis})"
-        else
-          "#{@target_name} #{@packet_name} #{@item_name}"
-        end
-      else
-        ''
-      end
-    end
-
-    # Resets the data object
-    def reset
-      super()
-      @unprocessed_x_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
-      @unprocessed_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
-      @differenced_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
-    end
-
-    # Creates a copy of the data object with settings but without data
-    def copy
-      data_object = super()
-      if @target_name and @packet_name and @item_name
-        data_object.set_item(@target_name.clone, @packet_name.clone, @item_name.clone)
-      end
-      data_object.time_item_name = @time_item_name.clone if @time_item_name
-      data_object.formatted_time_item_name = @formatted_time_item_name.clone if @formatted_time_item_name
-      data_object.value_type = @value_type
-      data_object.analysis = @analysis
-      data_object.analysis_samples = @analysis_samples
-      data_object.show_limits_lines = @show_limits_lines
-      if @target_name
-        limits_lines = []
-        get_limits_lines()
-        @limits_lines.each do |y_value, color|
-          limits_lines << [y_value, color.clone]
-        end
-        data_object.limits_lines = limits_lines
-      end
-      data_object
-    end
-
-    # Edits the data object - show_limits_lines is the only edit_safe? attribute
-    def edit(editted_data_object)
-      self.show_limits_lines = editted_data_object.show_limits_lines
-      super(editted_data_object)
-    end
-
-    # Determines if changes can be made to the data object without affecting data
-    #
-    # @param edited_data_object [DataObject] The data object which was edited
-    def edit_safe?(editted_data_object)
-      if @target_name != editted_data_object.target_name or
-         @packet_name != editted_data_object.packet_name or
-         @item_name != editted_data_object.item_name or
-         @time_item_name != editted_data_object.time_item_name or
-         @formatted_time_item_name != editted_data_object.formatted_time_item_name or
-         @value_type != editted_data_object.value_type or
-         @analysis != editted_data_object.analysis or
-         @analysis_samples != editted_data_object.analysis_samples
-        false
-      else
-        super(editted_data_object)
-      end
-    end
-
-    # Sets the housekeeping item
-    def set_item(target_name, packet_name, item_name, during_configuration = false)
-      @target_name = target_name
-      @packet_name = packet_name
-      @item_name = item_name
-      _, item = System.telemetry.packet_and_item(@target_name, @packet_name, @item_name)
-      @y_states = item.states
-      if @y_states
-        @value_type = :RAW
-      else
-        @value_type = :CONVERTED unless during_configuration
-      end
-
-      @time_item_name = 'RECEIVED_TIMESECONDS' unless @time_item_name
-
-      # Update limits lines
-      self.show_limits_lines = @show_limits_lines
-    end
-
-    # Sets the number of analysis samples
-    def analysis_samples=(new_analysis_samples)
-      # Value must be at least 2
-      if new_analysis_samples <= 1
-        raise ArgumentError, "Invalid ANALYSIS_SAMPLES value: #{new_analysis_samples}"
-      else
-        @analysis_samples = new_analysis_samples
-        if @analysis_samples % 2 == 0
-          # Even
-          @num_samples_ahead  = @analysis_samples / 2
-          @num_samples_behind = @num_samples_ahead - 1
-        else
-          # Odd
-          @num_samples_ahead  = (@analysis_samples - 1) / 2
-          @num_samples_behind = @num_samples_ahead
-        end
-      end
-    end
-
-    # Sets the show limits lines flag
-    def show_limits_lines=(new_show_limits_lines)
-      @show_limits_lines = new_show_limits_lines
-      get_limits_lines()
-    end
-
-    protected
-
-    def get_limits_lines
-      if @target_name
-        _, item = System.telemetry.packet_and_item(@target_name, @packet_name, @item_name)
-        if item.limits.values
-          @limits_lines = []
-          @limits_lines << [item.limits.values[:DEFAULT][0], 'red']
-          @limits_lines << [item.limits.values[:DEFAULT][1], 'yellow']
-          if item.limits.values[:DEFAULT].length == 6
-            @limits_lines << [item.limits.values[:DEFAULT][4], 'green']
-            @limits_lines << [item.limits.values[:DEFAULT][5], 'green']
-          end
-          @limits_lines << [item.limits.values[:DEFAULT][2], 'yellow']
-          @limits_lines << [item.limits.values[:DEFAULT][3], 'red']
-        end
-      end
-    end
-
-    # (see DataObject#prune_to_max_points_saved)
-    def prune_to_max_points_saved(force_prune = false)
-      prune_index = super(force_prune)
-      if prune_index
-        # Prune unprocessed
-        unless @unprocessed_x_values.empty?
-          @unprocessed_x_values.remove_before!(prune_index)
-          @unprocessed_y_values.remove_before!(prune_index)
-          @differenced_y_values.remove_before!(prune_index) if @analysis == :ALLAN_DEV
-        end
-      end
-      prune_index
-    end
-
-  end # class HousekeepingDataObject
-
-end # module Cosmos
+# encoding: ascii-8bit
+
+# Copyright 2014 Ball Aerospace & Technologies Corp.
+# All Rights Reserved.
+#
+# This program is free software; you can modify and/or redistribute it
+# under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 3 with
+# attribution addendums as found in the LICENSE.txt
+
+require 'cosmos'
+require 'cosmos/tools/tlm_grapher/data_objects/linegraph_data_object'
+
+module Cosmos
+
+  # Represents a data object on a line graph for a housekeeping telemetry item
+  class HousekeepingDataObject < LinegraphDataObject
+
+    # Value Types
+    VALUE_TYPES = [:RAW, :CONVERTED]
+
+    # Analysis Types
+    ANALYSIS_TYPES = [:NONE, :DIFFERENCE, :WINDOWED_MEAN, :WINDOWED_MEAN_REMOVED, :STD_DEV, :ALLAN_DEV, :MAXIMUM, :MINIMUM, :PEAK_TO_PEAK]
+
+    # The housekeeping telemetry item's target name (string)
+    attr_reader :target_name
+
+    # The housekeeping telemetry item's packet name (string)
+    attr_reader :packet_name
+
+    # The housekeeping telemetry item's item name (string)
+    attr_reader :item_name
+
+    # The housekeeping telemetry item's time item name (string)
+    attr_accessor :time_item_name
+
+    # The housekeeping telemetry item's formatted time item name (string)
+    attr_accessor :formatted_time_item_name
+
+    # Type of data to collect - :RAW or :CONVERTED
+    attr_accessor :value_type
+
+    # The analysis to perform
+    attr_accessor :analysis
+
+    # The number of samples to use in the analysis (integer)
+    attr_reader :analysis_samples
+
+    # Automatically show limits line for telemetry item (true or false)
+    attr_reader :show_limits_lines
+
+    # Limits lines for telemetry item (array)
+    attr_accessor :limits_lines
+
+    # Create a new data object
+    def initialize
+      super()
+      @target_name = nil
+      @packet_name = nil
+      @item_name = nil
+      @time_item_name = nil
+      @formatted_time_item_name = nil
+      @value_type = :CONVERTED
+      @analysis = :NONE
+      @analysis_samples = 3
+      @show_limits_lines = false
+      @limits_lines = []
+      @num_samples_ahead = 1
+      @num_samples_behind = 1
+      @unprocessed_x_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
+      @unprocessed_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
+      @differenced_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
+    end # def initialize
+
+    # Returns the configuration lines used to create this data object
+    def configuration_string
+      string = super()
+      string << "      ITEM #{@target_name} #{@packet_name} #{@item_name}\n" if @target_name and @packet_name and @item_name
+      string << "      TIME_ITEM #{@time_item_name}\n" if @time_item_name
+      string << "      FORMATTED_TIME_ITEM #{@formatted_time_item_name}\n" if @formatted_time_item_name
+      string << "      VALUE_TYPE #{@value_type}\n"
+      string << "      ANALYSIS #{@analysis}\n"
+      string << "      ANALYSIS_SAMPLES #{@analysis_samples}\n"
+      string << "      SHOW_LIMITS_LINES #{@show_limits_lines.to_s.upcase}\n"
+      string
+    end # def configuration_string
+
+    # Handles data object specific keywords
+    def handle_keyword(parser, keyword, parameters)
+      case keyword
+      when 'ITEM'
+        # Expect 3 parameters
+        parser.verify_num_parameters(3, 3, "ITEM <Target Name> <Packet Name> <Item Name>")
+        set_item(parameters[0], parameters[1], parameters[2], true)
+
+      when 'TIME_ITEM'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "TIME_ITEM <Time Item Name>")
+        @time_item_name = parameters[0].upcase
+
+      when 'FORMATTED_TIME_ITEM'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "FORMATTED_TIME_ITEM <Formatted Time Item Name>")
+        @formatted_time_item_name = parameters[0].upcase
+
+      when 'VALUE_TYPE'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "VALUE_TYPE <RAW or CONVERTED>")
+        value_type = parameters[0].upcase.intern
+        if VALUE_TYPES.include?(value_type)
+          @value_type = value_type
+        else
+          raise ArgumentError, "Unknown VALUE_TYPE value: #{value_type}"
+        end
+
+      when 'ANALYSIS'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "ANALYSIS <Analysis Type>")
+        analysis = parameters[0].upcase.intern
+        if ANALYSIS_TYPES.include?(analysis)
+          @analysis = analysis
+        else
+          raise ArgumentError, "Unknown ANALYSIS value: #{analysis}"
+        end
+
+      when 'ANALYSIS_SAMPLES'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "ANALYSIS_SAMPLES <Number of Samples>")
+        self.analysis_samples = parameters[0].to_i
+
+      when 'SHOW_LIMITS_LINES'
+        # Expect 1 parameter
+        parser.verify_num_parameters(1, 1, "SHOW_LIMITS_LINES <TRUE or FALSE>")
+        self.show_limits_lines = ConfigParser.handle_true_false(parameters[0])
+
+      else
+        # Unknown keywords are passed to parent data object
+        super(parser, keyword, parameters)
+
+      end # case keyword
+
+    end # def handle_keyword
+
+    # Returns the packet processed by this data object
+    def processed_packets
+      if @target_name and @packet_name
+        [[@target_name, @packet_name]]
+      else
+        []
+      end
+    end
+
+    # (see DataObject#process_packet)
+    def process_packet(packet, count)
+      begin
+        # Retrieve x and y values from packet
+        x_value = packet.read(@time_item_name)
+        if @value_type == :RAW
+          y_value = packet.read(@item_name, :RAW)
+        else
+          y_value = packet.read(@item_name)
+        end
+        # Bail on the values if they are NaN or nil as we can't graph them
+        return if x_value.nan? || y_value.nan? || x_value.nil? || y_value.nil?
+
+        @formatted_x_values << packet.read(@formatted_time_item_name) if @formatted_time_item_name
+
+        upper_index  = nil
+        sample_index = nil
+        lower_index  = nil
+        if @analysis != :NONE
+          # Add to unprocessed data
+          @unprocessed_x_values << x_value
+          @unprocessed_y_values << y_value
+
+          # Calculate indexes into arrays
+          upper_index  = @unprocessed_y_values.length - 1
+          sample_index = upper_index - @num_samples_ahead
+          lower_index  = sample_index - @num_samples_behind
+        end
+
+        case @analysis
+        when :NONE
+          @x_values << x_value
+          @y_values << (y_value + @y_offset)
+          @plot.redraw_needed = true
+
+        when :DIFFERENCE, :ALLAN_DEV
+          if @unprocessed_y_values.length > 1
+            differenced_y_value = y_value - @unprocessed_y_values[-2]
+
+            if @analysis == :DIFFERENCE
+              @x_values << x_value
+              @y_values << (differenced_y_value + @y_offset)
+              @plot.redraw_needed = true
+            else # @analysis == :ALLAN_DEV
+              @differenced_y_values[upper_index] = differenced_y_value
+
+              if lower_index >= 1
+                data = @differenced_y_values[lower_index..upper_index]
+                @x_values << @unprocessed_x_values[sample_index]
+                @y_values << (Math.sqrt(data.squared.sum / (@analysis_samples * 2)) + @y_offset)
+                @plot.redraw_needed = true
+              end
+            end
+          end
+
+        when :WINDOWED_MEAN, :WINDOWED_MEAN_REMOVED, :STD_DEV
+          if @unprocessed_y_values.length >= @analysis_samples
+            # Isolate window of data
+            data = @unprocessed_y_values[lower_index..upper_index]
+
+            # Calculate windowed mean
+            mean = data.mean
+
+            case @analysis
+            when :WINDOWED_MEAN
+              @y_values << (mean + @y_offset)
+            when :WINDOWED_MEAN_REMOVED
+              @y_values << (@unprocessed_y_values[sample_index] - mean + @y_offset)
+            when :STD_DEV
+              data.map! {|value| value - mean}
+              @y_values << (Math.sqrt(data.squared.sum / (@analysis_samples - 1)) + @y_offset)
+            end
+            @x_values << @unprocessed_x_values[sample_index]
+            @plot.redraw_needed = true
+          end
+
+        when :MAXIMUM, :MINIMUM, :PEAK_TO_PEAK
+          if @unprocessed_y_values.length >= @analysis_samples
+            case @analysis
+            when :MAXIMUM
+              @y_values << (@unprocessed_y_values[lower_index..upper_index].max + @y_offset)
+            when :MINIMUM
+              @y_values << (@unprocessed_y_values[lower_index..upper_index].min + @y_offset)
+            else # :PEAK_TO_PEAK
+              @y_values << ((@unprocessed_y_values[lower_index..upper_index].max - @unprocessed_y_values[lower_index..upper_index].min) + @y_offset)
+            end
+            @x_values << @unprocessed_x_values[sample_index]
+            @plot.redraw_needed = true
+          end
+
+        end # case @analysis
+
+        # Make sure the data object's first x value is the smallest x value encountered during packet processing.
+        # This is the smallest x_value seen since reset() was called, i.e. it doesn't get deleted during pruning.
+        # We make the assumption that @x_values is ordered, so just check against its first value.
+        if (@x_values.length > 0) and (@x_values[0] < @first_x_value)
+          @first_x_value = @x_values[0]
+        end
+
+        # Prune Data
+        prune_to_max_points_saved()
+      rescue Exception => error
+        raise error if error.class == NoMemoryError
+        reset()
+        @error = error
+        @plot.redraw_needed = true
+        if error.is_a? TypeError
+          @error = FatalError.new("Telemetry point #{packet.target_name} #{packet.packet_name} #{@item_name} could not be displayed. This is most likely due to this telemetry point being a String which can't be represented on the graph. Remove the point from the list of telemetry items to cause this exception to go away.\n\n#{error}")
+        end
+      end
+    end # def process_packet
+
+    # Returns the name of this data object
+    def name
+      if @target_name and @packet_name and @item_name
+        if @analysis != :NONE
+          "#{@target_name} #{@packet_name} #{@item_name} (#{@analysis})"
+        else
+          "#{@target_name} #{@packet_name} #{@item_name}"
+        end
+      else
+        ''
+      end
+    end
+
+    # Resets the data object
+    def reset
+      super()
+      @unprocessed_x_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
+      @unprocessed_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
+      @differenced_y_values = LowFragmentationArray.new(DEFAULT_ARRAY_SIZE)
+    end
+
+    # Creates a copy of the data object with settings but without data
+    def copy
+      data_object = super()
+      if @target_name and @packet_name and @item_name
+        data_object.set_item(@target_name.clone, @packet_name.clone, @item_name.clone)
+      end
+      data_object.time_item_name = @time_item_name.clone if @time_item_name
+      data_object.formatted_time_item_name = @formatted_time_item_name.clone if @formatted_time_item_name
+      data_object.value_type = @value_type
+      data_object.analysis = @analysis
+      data_object.analysis_samples = @analysis_samples
+      data_object.show_limits_lines = @show_limits_lines
+      if @target_name
+        limits_lines = []
+        get_limits_lines()
+        @limits_lines.each do |y_value, color|
+          limits_lines << [y_value, color.clone]
+        end
+        data_object.limits_lines = limits_lines
+      end
+      data_object
+    end
+
+    # Edits the data object - show_limits_lines is the only edit_safe? attribute
+    def edit(editted_data_object)
+      self.show_limits_lines = editted_data_object.show_limits_lines
+      super(editted_data_object)
+    end
+
+    # Determines if changes can be made to the data object without affecting data
+    #
+    # @param edited_data_object [DataObject] The data object which was edited
+    def edit_safe?(editted_data_object)
+      if @target_name != editted_data_object.target_name or
+         @packet_name != editted_data_object.packet_name or
+         @item_name != editted_data_object.item_name or
+         @time_item_name != editted_data_object.time_item_name or
+         @formatted_time_item_name != editted_data_object.formatted_time_item_name or
+         @value_type != editted_data_object.value_type or
+         @analysis != editted_data_object.analysis or
+         @analysis_samples != editted_data_object.analysis_samples
+        false
+      else
+        super(editted_data_object)
+      end
+    end
+
+    # Sets the housekeeping item
+    def set_item(target_name, packet_name, item_name, during_configuration = false)
+      @target_name = target_name
+      @packet_name = packet_name
+      @item_name = item_name
+      _, item = System.telemetry.packet_and_item(@target_name, @packet_name, @item_name)
+      @y_states = item.states
+      if @y_states
+        @value_type = :RAW
+      else
+        @value_type = :CONVERTED unless during_configuration
+      end
+
+      @time_item_name = 'RECEIVED_TIMESECONDS' unless @time_item_name
+
+      # Update limits lines
+      self.show_limits_lines = @show_limits_lines
+    end
+
+    # Sets the number of analysis samples
+    def analysis_samples=(new_analysis_samples)
+      # Value must be at least 2
+      if new_analysis_samples <= 1
+        raise ArgumentError, "Invalid ANALYSIS_SAMPLES value: #{new_analysis_samples}"
+      else
+        @analysis_samples = new_analysis_samples
+        if @analysis_samples % 2 == 0
+          # Even
+          @num_samples_ahead  = @analysis_samples / 2
+          @num_samples_behind = @num_samples_ahead - 1
+        else
+          # Odd
+          @num_samples_ahead  = (@analysis_samples - 1) / 2
+          @num_samples_behind = @num_samples_ahead
+        end
+      end
+    end
+
+    # Sets the show limits lines flag
+    def show_limits_lines=(new_show_limits_lines)
+      @show_limits_lines = new_show_limits_lines
+      get_limits_lines()
+    end
+
+    protected
+
+    def get_limits_lines
+      if @target_name
+        _, item = System.telemetry.packet_and_item(@target_name, @packet_name, @item_name)
+        if item.limits.values
+          @limits_lines = []
+          @limits_lines << [item.limits.values[:DEFAULT][0], 'red']
+          @limits_lines << [item.limits.values[:DEFAULT][1], 'yellow']
+          if item.limits.values[:DEFAULT].length == 6
+            @limits_lines << [item.limits.values[:DEFAULT][4], 'green']
+            @limits_lines << [item.limits.values[:DEFAULT][5], 'green']
+          end
+          @limits_lines << [item.limits.values[:DEFAULT][2], 'yellow']
+          @limits_lines << [item.limits.values[:DEFAULT][3], 'red']
+        end
+      end
+    end
+
+    # (see DataObject#prune_to_max_points_saved)
+    def prune_to_max_points_saved(force_prune = false)
+      prune_index = super(force_prune)
+      if prune_index
+        # Prune unprocessed
+        unless @unprocessed_x_values.empty?
+          @unprocessed_x_values.remove_before!(prune_index)
+          @unprocessed_y_values.remove_before!(prune_index)
+          @differenced_y_values.remove_before!(prune_index) if @analysis == :ALLAN_DEV
+        end
+      end
+      prune_index
+    end
+
+  end # class HousekeepingDataObject
+
+end # module Cosmos