clutter 2.2.4-x64-mingw32

data/vendor/local/include/cogl/cogl-path/cogl-path.h

@@ -0,0 +1,68 @@
+/*
+ * Cogl
+ *
+ * A Low Level GPU Graphics and Utilities API
+ *
+ * Copyright (C) 2008,2009,2013 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ *
+ */
+
+#ifndef __COGL_PATH_H__
+#define __COGL_PATH_H__
+
+/**
+ * SECTION:cogl-paths
+ * @short_description: Functions for constructing and drawing 2D paths.
+ *
+ * There are two levels on which drawing with cogl-paths can be used.
+ * The highest level functions construct various simple primitive
+ * shapes to be either filled or stroked. Using a lower-level set of
+ * functions more complex and arbitrary paths can be constructed by
+ * concatenating straight line, bezier curve and arc segments.
+ *
+ * When constructing arbitrary paths, the current pen location is
+ * initialized using the move_to command. The subsequent path segments
+ * implicitly use the last pen location as their first vertex and move
+ * the pen location to the last vertex they produce at the end. Also
+ * there are special versions of functions that allow specifying the
+ * vertices of the path segments relative to the last pen location
+ * rather then in the absolute coordinates.
+ */
+
+#include <cogl/cogl-defines.h>
+
+#ifdef COGL_HAS_GTYPE_SUPPORT
+#include <cogl-path/cogl-path-enum-types.h>
+#endif
+
+#include <cogl-path/cogl-path-types.h>
+
+#ifdef COGL_ENABLE_EXPERIMENTAL_2_0_API
+#include <cogl-path/cogl2-path-functions.h>
+#else
+#include <cogl-path/cogl1-path-functions.h>
+#endif
+
+#endif /* __COGL_PATH_H__ */
+

data/vendor/local/include/cogl/cogl-path/cogl1-path-functions.h

@@ -0,0 +1,467 @@
+/*
+ * Cogl
+ *
+ * A Low Level GPU Graphics and Utilities API
+ *
+ * Copyright (C) 2008,2009,2012 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ *
+ */
+
+#if !defined(__COGL_H_INSIDE__) && !defined(COGL_COMPILATION)
+#error "Only <cogl/cogl.h> can be included directly."
+#endif
+
+#ifndef __COGL_PATH_FUNCTIONS_H__
+#define __COGL_PATH_FUNCTIONS_H__
+
+/* The functions are declared separately because cogl-path.c needs to
+   get the function declarations from the old 1.0 API without
+   colliding with the enum declarations from the 2.0 API */
+
+#include <cogl/cogl-types.h>
+
+COGL_BEGIN_DECLS
+
+/**
+ * cogl_is_path:
+ * @handle: A CoglHandle
+ *
+ * Gets whether the given handle references an existing path object.
+ *
+ * Return value: %TRUE if the handle references a #CoglPath,
+ *   %FALSE otherwise
+ */
+CoglBool
+cogl_is_path (CoglHandle handle);
+
+/**
+ * cogl_path_set_fill_rule:
+ * @fill_rule: The new fill rule.
+ *
+ * Sets the fill rule of the current path to @fill_rule. This will
+ * affect how the path is filled when cogl_path_fill() is later
+ * called. Note that the fill rule state is attached to the path so
+ * calling cogl_get_path() will preserve the fill rule and calling
+ * cogl_path_new() will reset the fill rule back to the default.
+ *
+ * Since: 1.4
+ */
+void
+cogl_path_set_fill_rule (CoglPathFillRule fill_rule);
+
+/**
+ * cogl_path_get_fill_rule:
+ *
+ * Retrieves the fill rule set using cogl_path_set_fill_rule().
+ *
+ * Return value: the fill rule that is used for the current path.
+ *
+ * Since: 1.4
+ */
+CoglPathFillRule
+cogl_path_get_fill_rule (void);
+
+/**
+ * cogl_path_fill:
+ *
+ * Fills the interior of the constructed shape using the current
+ * drawing color. The current path is then cleared. To use the path
+ * again, call cogl_path_fill_preserve() instead.
+ *
+ * The interior of the shape is determined using the fill rule of the
+ * path. See %CoglPathFillRule for details.
+ **/
+void
+cogl_path_fill (void);
+
+/**
+ * cogl_path_fill_preserve:
+ *
+ * Fills the interior of the constructed shape using the current
+ * drawing color and preserves the path to be used again. See
+ * cogl_path_fill() for a description what is considered the interior
+ * of the shape.
+ *
+ * Since: 1.0
+ **/
+void
+cogl_path_fill_preserve (void);
+
+/**
+ * cogl_path_stroke:
+ *
+ * Strokes the constructed shape using the current drawing color and a
+ * width of 1 pixel (regardless of the current transformation
+ * matrix). To current path is then cleared. To use the path again,
+ * call cogl_path_stroke_preserve() instead.
+ **/
+void
+cogl_path_stroke (void);
+
+/**
+ * cogl_path_stroke_preserve:
+ *
+ * Strokes the constructed shape using the current drawing color and
+ * preserves the path to be used again.
+ *
+ * Since: 1.0
+ **/
+void
+cogl_path_stroke_preserve (void);
+
+/**
+ * cogl_path_new:
+ *
+ * Clears the current path and starts a new one. Creating a new path
+ * also resets the fill rule to the default which is
+ * %COGL_PATH_FILL_RULE_EVEN_ODD.
+ *
+ * Since: 1.0
+ */
+void
+cogl_path_new (void);
+
+/**
+ * cogl_path_move_to:
+ * @x: X coordinate of the pen location to move to.
+ * @y: Y coordinate of the pen location to move to.
+ *
+ * Moves the pen to the given location. If there is an existing path
+ * this will start a new disjoint subpath.
+  **/
+void
+cogl_path_move_to (float x,
+                   float y);
+
+
+/**
+ * cogl_path_rel_move_to:
+ * @x: X offset from the current pen location to move the pen to.
+ * @y: Y offset from the current pen location to move the pen to.
+ *
+ * Moves the pen to the given offset relative to the current pen
+ * location. If there is an existing path this will start a new
+ * disjoint subpath.
+ **/
+void
+cogl_path_rel_move_to (float x,
+                       float y);
+
+/**
+ * cogl_path_line_to:
+ * @x: X coordinate of the end line vertex
+ * @y: Y coordinate of the end line vertex
+ *
+ * Adds a straight line segment to the current path that ends at the
+ * given coordinates.
+ **/
+void
+cogl_path_line_to (float x,
+                   float y);
+
+/**
+ * cogl_path_rel_line_to:
+ * @x: X offset from the current pen location of the end line vertex
+ * @y: Y offset from the current pen location of the end line vertex
+ *
+ * Adds a straight line segment to the current path that ends at the
+ * given coordinates relative to the current pen location.
+ **/
+void
+cogl_path_rel_line_to (float x,
+                       float y);
+
+
+/**
+ * cogl_path_arc:
+ * @center_x: X coordinate of the elliptical arc center
+ * @center_y: Y coordinate of the elliptical arc center
+ * @radius_x: X radius of the elliptical arc
+ * @radius_y: Y radius of the elliptical arc
+ * @angle_1: Angle in degrees at which the arc begin
+ * @angle_2: Angle in degrees at which the arc ends
+ *
+ * Adds an elliptical arc segment to the current path. A straight line
+ * segment will link the current pen location with the first vertex
+ * of the arc. If you perform a move_to to the arcs start just before
+ * drawing it you create a free standing arc.
+ *
+ * The angles are measured in degrees where 0° is in the direction of
+ * the positive X axis and 90° is in the direction of the positive Y
+ * axis. The angle of the arc begins at @angle_1 and heads towards
+ * @angle_2 (so if @angle_2 is less than @angle_1 it will decrease,
+ * otherwise it will increase).
+ **/
+void
+cogl_path_arc (float center_x,
+               float center_y,
+               float radius_x,
+               float radius_y,
+               float angle_1,
+               float angle_2);
+
+/**
+ * cogl_path_curve_to:
+ * @x_1: X coordinate of the second bezier control point
+ * @y_1: Y coordinate of the second bezier control point
+ * @x_2: X coordinate of the third bezier control point
+ * @y_2: Y coordinate of the third bezier control point
+ * @x_3: X coordinate of the fourth bezier control point
+ * @y_3: Y coordinate of the fourth bezier control point
+ *
+ * Adds a cubic bezier curve segment to the current path with the given
+ * second, third and fourth control points and using current pen location
+ * as the first control point.
+ **/
+void
+cogl_path_curve_to (float x_1,
+                    float y_1,
+                    float x_2,
+                    float y_2,
+                    float x_3,
+                    float y_3);
+
+/**
+ * cogl_path_rel_curve_to:
+ * @x_1: X coordinate of the second bezier control point
+ * @y_1: Y coordinate of the second bezier control point
+ * @x_2: X coordinate of the third bezier control point
+ * @y_2: Y coordinate of the third bezier control point
+ * @x_3: X coordinate of the fourth bezier control point
+ * @y_3: Y coordinate of the fourth bezier control point
+ *
+ * Adds a cubic bezier curve segment to the current path with the given
+ * second, third and fourth control points and using current pen location
+ * as the first control point. The given coordinates are relative to the
+ * current pen location.
+ */
+void
+cogl_path_rel_curve_to (float x_1,
+                        float y_1,
+                        float x_2,
+                        float y_2,
+                        float x_3,
+                        float y_3);
+
+/**
+ * cogl_path_close:
+ *
+ * Closes the path being constructed by adding a straight line segment
+ * to it that ends at the first vertex of the path.
+ **/
+void
+cogl_path_close (void);
+
+/**
+ * cogl_path_line:
+ * @x_1: X coordinate of the start line vertex
+ * @y_1: Y coordinate of the start line vertex
+ * @x_2: X coordinate of the end line vertex
+ * @y_2: Y coordinate of the end line vertex
+ *
+ * Constructs a straight line shape starting and ending at the given
+ * coordinates. If there is an existing path this will start a new
+ * disjoint sub-path.
+ **/
+void
+cogl_path_line (float x_1,
+                float y_1,
+                float x_2,
+                float y_2);
+
+/**
+ * cogl_path_polyline:
+ * @coords: (in) (array) (transfer none): A pointer to the first element of an
+ * array of fixed-point values that specify the vertex coordinates.
+ * @num_points: The total number of vertices.
+ *
+ * Constructs a series of straight line segments, starting from the
+ * first given vertex coordinate. If there is an existing path this
+ * will start a new disjoint sub-path. Each subsequent segment starts
+ * where the previous one ended and ends at the next given vertex
+ * coordinate.
+ *
+ * The coords array must contain 2 * num_points values. The first value
+ * represents the X coordinate of the first vertex, the second value
+ * represents the Y coordinate of the first vertex, continuing in the same
+ * fashion for the rest of the vertices. (num_points - 1) segments will
+ * be constructed.
+ **/
+void
+cogl_path_polyline (const float *coords,
+                    int          num_points);
+
+
+/**
+ * cogl_path_polygon:
+ * @coords: (in) (array) (transfer none): A pointer to the first element of
+ * an array of fixed-point values that specify the vertex coordinates.
+ * @num_points: The total number of vertices.
+ *
+ * Constructs a polygonal shape of the given number of vertices. If
+ * there is an existing path this will start a new disjoint sub-path.
+ *
+ * The coords array must contain 2 * num_points values. The first value
+ * represents the X coordinate of the first vertex, the second value
+ * represents the Y coordinate of the first vertex, continuing in the same
+ * fashion for the rest of the vertices.
+ **/
+void
+cogl_path_polygon (const float *coords,
+                   int          num_points);
+
+
+/**
+ * cogl_path_rectangle:
+ * @x_1: X coordinate of the top-left corner.
+ * @y_1: Y coordinate of the top-left corner.
+ * @x_2: X coordinate of the bottom-right corner.
+ * @y_2: Y coordinate of the bottom-right corner.
+ *
+ * Constructs a rectangular shape at the given coordinates. If there
+ * is an existing path this will start a new disjoint sub-path.
+ **/
+void
+cogl_path_rectangle (float x_1,
+                     float y_1,
+                     float x_2,
+                     float y_2);
+
+/**
+ * cogl_path_ellipse:
+ * @center_x: X coordinate of the ellipse center
+ * @center_y: Y coordinate of the ellipse center
+ * @radius_x: X radius of the ellipse
+ * @radius_y: Y radius of the ellipse
+ *
+ * Constructs an ellipse shape. If there is an existing path this will
+ * start a new disjoint sub-path.
+ **/
+void
+cogl_path_ellipse (float center_x,
+                   float center_y,
+                   float radius_x,
+                   float radius_y);
+
+/**
+ * cogl_path_round_rectangle:
+ * @x_1: X coordinate of the top-left corner.
+ * @y_1: Y coordinate of the top-left corner.
+ * @x_2: X coordinate of the bottom-right corner.
+ * @y_2: Y coordinate of the bottom-right corner.
+ * @radius: Radius of the corner arcs.
+ * @arc_step: Angle increment resolution for subdivision of
+ * the corner arcs.
+ *
+ * Constructs a rectangular shape with rounded corners. If there is an
+ * existing path this will start a new disjoint sub-path.
+ **/
+void
+cogl_path_round_rectangle (float x_1,
+                           float y_1,
+                           float x_2,
+                           float y_2,
+                           float radius,
+                           float arc_step);
+
+/**
+ * cogl_get_path: (skip)
+ *
+ * Gets a pointer to the current path. The path can later be used
+ * again by calling cogl_path_set(). Note that the path isn't copied
+ * so if you later call any functions to add to the path it will
+ * affect the returned object too. No reference is taken on the path
+ * so if you want to retain it you should take your own reference with
+ * cogl_object_ref().
+ *
+ * Return value: a pointer to the current path.
+ *
+ * Since: 1.4
+ */
+CoglPath *
+cogl_get_path (void);
+
+/**
+ * cogl_set_path: (skip)
+ * @path: A #CoglPath object
+ *
+ * Replaces the current path with @path. A reference is taken on the
+ * object so if you no longer need the path you should unref with
+ * cogl_object_unref().
+ *
+ * Since: 1.4
+ */
+void
+cogl_set_path (CoglPath *path);
+
+/**
+ * cogl_path_copy: (skip)
+ * @path: A #CoglPath object
+ *
+ * Returns a new copy of the path in @path. The new path has a
+ * reference count of 1 so you should unref it with
+ * cogl_object_unref() if you no longer need it.
+ *
+ * Internally the path will share the data until one of the paths is
+ * modified so copying paths should be relatively cheap.
+ *
+ * Return value: (transfer full): a copy of the path in @path.
+ */
+CoglPath *
+cogl_path_copy (CoglPath *path);
+
+/**
+ * cogl_clip_push_from_path_preserve:
+ *
+ * Sets a new clipping area using the current path. The current path
+ * is then cleared. The clipping area is intersected with the previous
+ * clipping area. To restore the previous clipping area, call
+ * cogl_clip_pop().
+ *
+ * Since: 1.0
+ * Deprecated: 1.16: Use cogl_framebuffer_push_path_clip() instead
+ */
+COGL_DEPRECATED_IN_1_16_FOR (cogl_framebuffer_push_path_clip)
+void
+cogl_clip_push_from_path_preserve (void);
+
+/**
+ * cogl_clip_push_from_path:
+ *
+ * Sets a new clipping area using the current path. The current path
+ * is then cleared. The clipping area is intersected with the previous
+ * clipping area. To restore the previous clipping area, call
+ * cogl_clip_pop().
+ *
+ * Since: 1.0
+ * Deprecated: 1.16: Use cogl_framebuffer_push_path_clip() instead
+ */
+COGL_DEPRECATED_IN_1_16_FOR (cogl_framebuffer_push_path_clip)
+void
+cogl_clip_push_from_path (void);
+
+COGL_END_DECLS
+
+#endif /* __COGL_PATH_FUNCTIONS_H__ */
+