@bloomengine/engine 0.4.0 → 0.4.1

package/native/third_party/JoltPhysics/Jolt/Physics/Body/AllowedDOFs.h

@@ -1,68 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2023 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-JPH_NAMESPACE_BEGIN
-
-/// Enum used in BodyCreationSettings and MotionProperties to indicate which degrees of freedom a body has
-enum class EAllowedDOFs : uint8
-{
-	None				= 0b000000,									///< No degrees of freedom are allowed. Note that this is not valid and will crash. Use a static body instead.
-	All					= 0b111111,									///< All degrees of freedom are allowed
-	TranslationX		= 0b000001,									///< Body can move in world space X axis
-	TranslationY		= 0b000010,									///< Body can move in world space Y axis
-	TranslationZ		= 0b000100,									///< Body can move in world space Z axis
-	RotationX			= 0b001000,									///< Body can rotate around world space X axis
-	RotationY			= 0b010000,									///< Body can rotate around world space Y axis
-	RotationZ			= 0b100000,									///< Body can rotate around world space Z axis
-	Plane2D				= TranslationX | TranslationY | RotationZ,	///< Body can only move in X and Y axis and rotate around Z axis
-};
-
-/// Bitwise OR operator for EAllowedDOFs
-constexpr EAllowedDOFs operator | (EAllowedDOFs inLHS, EAllowedDOFs inRHS)
-{
-	return EAllowedDOFs(uint8(inLHS) | uint8(inRHS));
-}
-
-/// Bitwise AND operator for EAllowedDOFs
-constexpr EAllowedDOFs operator & (EAllowedDOFs inLHS, EAllowedDOFs inRHS)
-{
-	return EAllowedDOFs(uint8(inLHS) & uint8(inRHS));
-}
-
-/// Bitwise XOR operator for EAllowedDOFs
-constexpr EAllowedDOFs operator ^ (EAllowedDOFs inLHS, EAllowedDOFs inRHS)
-{
-	return EAllowedDOFs(uint8(inLHS) ^ uint8(inRHS));
-}
-
-/// Bitwise NOT operator for EAllowedDOFs
-constexpr EAllowedDOFs operator ~ (EAllowedDOFs inAllowedDOFs)
-{
-	return EAllowedDOFs(~uint8(inAllowedDOFs));
-}
-
-/// Bitwise OR assignment operator for EAllowedDOFs
-constexpr EAllowedDOFs & operator |= (EAllowedDOFs &ioLHS, EAllowedDOFs inRHS)
-{
-	ioLHS = ioLHS | inRHS;
-	return ioLHS;
-}
-
-/// Bitwise AND assignment operator for EAllowedDOFs
-constexpr EAllowedDOFs & operator &= (EAllowedDOFs &ioLHS, EAllowedDOFs inRHS)
-{
-	ioLHS = ioLHS & inRHS;
-	return ioLHS;
-}
-
-/// Bitwise XOR assignment operator for EAllowedDOFs
-constexpr EAllowedDOFs & operator ^= (EAllowedDOFs &ioLHS, EAllowedDOFs inRHS)
-{
-	ioLHS = ioLHS ^ inRHS;
-	return ioLHS;
-}
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/Body/Body.cpp

@@ -1,426 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#include <Jolt/Jolt.h>
-
-#include <Jolt/Physics/Body/Body.h>
-#include <Jolt/Physics/Body/BodyCreationSettings.h>
-#include <Jolt/Physics/SoftBody/SoftBodyCreationSettings.h>
-#include <Jolt/Physics/SoftBody/SoftBodyMotionProperties.h>
-#include <Jolt/Physics/PhysicsSettings.h>
-#include <Jolt/Physics/StateRecorder.h>
-#include <Jolt/Physics/Collision/Shape/EmptyShape.h>
-#include <Jolt/Core/StringTools.h>
-#include <Jolt/Core/Profiler.h>
-#ifdef JPH_DEBUG_RENDERER
-	#include <Jolt/Renderer/DebugRenderer.h>
-#endif // JPH_DEBUG_RENDERER
-
-JPH_NAMESPACE_BEGIN
-
-static const EmptyShape sFixedToWorldShape;
-Body Body::sFixedToWorld(false);
-
-Body::Body(bool) :
-	mPosition(Vec3::sZero()),
-	mRotation(Quat::sIdentity()),
-	mShape(&sFixedToWorldShape), // Dummy shape
-	mFriction(0.0f),
-	mRestitution(0.0f),
-	mObjectLayer(cObjectLayerInvalid),
-	mMotionType(EMotionType::Static)
-{
-	sFixedToWorldShape.SetEmbedded();
-}
-
-void Body::SetMotionType(EMotionType inMotionType)
-{
-	if (mMotionType == inMotionType)
-		return;
-
-	JPH_ASSERT(inMotionType == EMotionType::Static || mMotionProperties != nullptr, "Body needs to be created with mAllowDynamicOrKinematic set to true");
-	JPH_ASSERT(inMotionType != EMotionType::Static || !IsActive(), "Deactivate body first");
-	JPH_ASSERT(inMotionType == EMotionType::Dynamic || !IsSoftBody(), "Soft bodies can only be dynamic, you can make individual vertices kinematic by setting their inverse mass to 0");
-
-	// Store new motion type
-	mMotionType = inMotionType;
-
-	if (mMotionProperties != nullptr)
-	{
-		// Update cache
-		JPH_IF_ENABLE_ASSERTS(mMotionProperties->mCachedMotionType = inMotionType;)
-
-		switch (inMotionType)
-		{
-		case EMotionType::Static:
-			// Stop the object
-			mMotionProperties->mLinearVelocity = Vec3::sZero();
-			mMotionProperties->mAngularVelocity = Vec3::sZero();
-			[[fallthrough]];
-
-		case EMotionType::Kinematic:
-			// Cancel forces
-			mMotionProperties->ResetForce();
-			mMotionProperties->ResetTorque();
-			break;
-
-		case EMotionType::Dynamic:
-			break;
-		}
-	}
-}
-
-void Body::SetAllowSleeping(bool inAllow)
-{
-	mMotionProperties->mAllowSleeping = inAllow;
-	if (inAllow)
-		ResetSleepTimer();
-}
-
-void Body::MoveKinematic(RVec3Arg inTargetPosition, QuatArg inTargetRotation, float inDeltaTime)
-{
-	JPH_ASSERT(IsRigidBody()); // Only valid for rigid bodies
-	JPH_ASSERT(!IsStatic());
-	JPH_ASSERT(BodyAccess::sCheckRights(BodyAccess::sPositionAccess(), BodyAccess::EAccess::Read));
-
-	// Calculate center of mass at end situation
-	RVec3 new_com = inTargetPosition + inTargetRotation * mShape->GetCenterOfMass();
-
-	// Calculate delta position and rotation
-	Vec3 delta_pos = Vec3(new_com - mPosition);
-	Quat delta_rotation = inTargetRotation * mRotation.Conjugated();
-
-	mMotionProperties->MoveKinematic(delta_pos, delta_rotation, inDeltaTime);
-}
-
-void Body::CalculateWorldSpaceBoundsInternal()
-{
-	mBounds = mShape->GetWorldSpaceBounds(GetCenterOfMassTransform(), Vec3::sOne());
-}
-
-void Body::SetPositionAndRotationInternal(RVec3Arg inPosition, QuatArg inRotation, bool inResetSleepTimer)
-{
-	JPH_ASSERT(BodyAccess::sCheckRights(BodyAccess::sPositionAccess(), BodyAccess::EAccess::ReadWrite));
-
-	mPosition = inPosition + inRotation * mShape->GetCenterOfMass();
-	mRotation = inRotation;
-
-	// Initialize bounding box
-	CalculateWorldSpaceBoundsInternal();
-
-	// Reset sleeping test
-	if (inResetSleepTimer && mMotionProperties != nullptr)
-		ResetSleepTimer();
-}
-
-void Body::UpdateCenterOfMassInternal(Vec3Arg inPreviousCenterOfMass, bool inUpdateMassProperties)
-{
-	// Update center of mass position so the world position for this body stays the same
-	mPosition += mRotation * (mShape->GetCenterOfMass() - inPreviousCenterOfMass);
-
-	// Recalculate mass and inertia if requested
-	if (inUpdateMassProperties && mMotionProperties != nullptr)
-		mMotionProperties->SetMassProperties(mMotionProperties->GetAllowedDOFs(), mShape->GetMassProperties());
-}
-
-void Body::SetShapeInternal(const Shape *inShape, bool inUpdateMassProperties)
-{
-	JPH_ASSERT(IsRigidBody()); // Only valid for rigid bodies
-	JPH_ASSERT(BodyAccess::sCheckRights(BodyAccess::sPositionAccess(), BodyAccess::EAccess::ReadWrite));
-
-	// Get the old center of mass
-	Vec3 old_com = mShape->GetCenterOfMass();
-
-	// Update the shape
-	mShape = inShape;
-
-	// Update center of mass
-	UpdateCenterOfMassInternal(old_com, inUpdateMassProperties);
-
-	// Recalculate bounding box
-	CalculateWorldSpaceBoundsInternal();
-}
-
-ECanSleep Body::UpdateSleepStateInternal(float inDeltaTime, float inMaxMovement, float inTimeBeforeSleep)
-{
-	// Check override & sensors will never go to sleep (they would stop detecting collisions with sleeping bodies)
-	if (!mMotionProperties->mAllowSleeping || IsSensor())
-		return ECanSleep::CannotSleep;
-
-	// Get the points to test
-	RVec3 points[3];
-	GetSleepTestPoints(points);
-
-#ifdef JPH_DOUBLE_PRECISION
-	// Get base offset for spheres
-	DVec3 offset = mMotionProperties->GetSleepTestOffset();
-#endif // JPH_DOUBLE_PRECISION
-
-	for (int i = 0; i < 3; ++i)
-	{
-		Sphere &sphere = mMotionProperties->mSleepTestSpheres[i];
-
-		// Make point relative to base offset
-#ifdef JPH_DOUBLE_PRECISION
-		Vec3 p = Vec3(points[i] - offset);
-#else
-		Vec3 p = points[i];
-#endif // JPH_DOUBLE_PRECISION
-
-		// Encapsulate the point in a sphere
-		sphere.EncapsulatePoint(p);
-
-		// Test if it exceeded the max movement
-		if (sphere.GetRadius() > inMaxMovement)
-		{
-			// Body is not sleeping, reset test
-			mMotionProperties->ResetSleepTestSpheres(points);
-			return ECanSleep::CannotSleep;
-		}
-	}
-
-	return mMotionProperties->AccumulateSleepTime(inDeltaTime, inTimeBeforeSleep);
-}
-
-void Body::GetSubmergedVolume(RVec3Arg inSurfacePosition, Vec3Arg inSurfaceNormal, float &outTotalVolume, float &outSubmergedVolume, Vec3 &outRelativeCenterOfBuoyancy) const
-{
-	// For GetSubmergedVolume we transform the surface relative to the body position for increased precision
-	Mat44 rotation = Mat44::sRotation(mRotation);
-	Plane surface_relative_to_body = Plane::sFromPointAndNormal(inSurfacePosition - mPosition, inSurfaceNormal);
-
-	// Calculate amount of volume that is submerged and what the center of buoyancy is
-	mShape->GetSubmergedVolume(rotation, Vec3::sOne(), surface_relative_to_body, outTotalVolume, outSubmergedVolume, outRelativeCenterOfBuoyancy JPH_IF_DEBUG_RENDERER(, mPosition));
-}
-
-bool Body::ApplyBuoyancyImpulse(float inTotalVolume, float inSubmergedVolume, Vec3Arg inRelativeCenterOfBuoyancy, float inBuoyancy, float inLinearDrag, float inAngularDrag, Vec3Arg inFluidVelocity, Vec3Arg inGravity, float inDeltaTime)
-{
-	JPH_ASSERT(IsRigidBody()); // Only implemented for rigid bodies currently
-
-	// We follow the approach from 'Game Programming Gems 6' 2.5 Exact Buoyancy for Polyhedra
-	// All quantities below are in world space
-
-	// If we're not submerged, there's no point in doing the rest of the calculations
-	if (inSubmergedVolume > 0.0f)
-	{
-	#ifdef JPH_DEBUG_RENDERER
-		// Draw submerged volume properties
-		if (Shape::sDrawSubmergedVolumes)
-		{
-			RVec3 center_of_buoyancy = mPosition + inRelativeCenterOfBuoyancy;
-			DebugRenderer::sInstance->DrawMarker(center_of_buoyancy, Color::sWhite, 2.0f);
-			DebugRenderer::sInstance->DrawText3D(center_of_buoyancy, StringFormat("%.3f / %.3f", (double)inSubmergedVolume, (double)inTotalVolume));
-		}
-	#endif // JPH_DEBUG_RENDERER
-
-		// When buoyancy is 1 we want neutral buoyancy, this means that the density of the liquid is the same as the density of the body at that point.
-		// Buoyancy > 1 should make the object float, < 1 should make it sink.
-		float inverse_mass = mMotionProperties->GetInverseMass();
-		float fluid_density = inBuoyancy / (inTotalVolume * inverse_mass);
-
-		// Buoyancy force = Density of Fluid * Submerged volume * Magnitude of gravity * Up direction (eq 2.5.1)
-		// Impulse = Force * Delta time
-		// We should apply this at the center of buoyancy (= center of mass of submerged volume)
-		Vec3 buoyancy_impulse = -fluid_density * inSubmergedVolume * mMotionProperties->GetGravityFactor() * inGravity * inDeltaTime;
-
-		// Calculate the velocity of the center of buoyancy relative to the fluid
-		Vec3 linear_velocity = mMotionProperties->GetLinearVelocity();
-		Vec3 angular_velocity = mMotionProperties->GetAngularVelocity();
-		Vec3 center_of_buoyancy_velocity = linear_velocity + angular_velocity.Cross(inRelativeCenterOfBuoyancy);
-		Vec3 relative_center_of_buoyancy_velocity = inFluidVelocity - center_of_buoyancy_velocity;
-
-		// Here we deviate from the article, instead of eq 2.5.14 we use a quadratic drag formula: https://en.wikipedia.org/wiki/Drag_%28physics%29
-		// Drag force = 0.5 * Fluid Density * (Velocity of fluid - Velocity of center of buoyancy)^2 * Linear Drag * Area Facing the Relative Fluid Velocity
-		// Again Impulse = Force * Delta Time
-		// We should apply this at the center of buoyancy (= center of mass for submerged volume with no center of mass offset)
-
-		// Get size of local bounding box
-		Vec3 size = mShape->GetLocalBounds().GetSize();
-
-		// Determine area of the local space bounding box in the direction of the relative velocity between the fluid and the center of buoyancy
-		float area = 0.0f;
-		float relative_center_of_buoyancy_velocity_len_sq = relative_center_of_buoyancy_velocity.LengthSq();
-		if (relative_center_of_buoyancy_velocity_len_sq > 1.0e-12f)
-		{
-			Vec3 local_relative_center_of_buoyancy_velocity = GetRotation().InverseRotate(relative_center_of_buoyancy_velocity);
-			area = local_relative_center_of_buoyancy_velocity.Abs().Dot(size.Swizzle<SWIZZLE_Y, SWIZZLE_Z, SWIZZLE_X>() * size.Swizzle<SWIZZLE_Z, SWIZZLE_X, SWIZZLE_Y>()) / sqrt(relative_center_of_buoyancy_velocity_len_sq);
-		}
-
-		// Calculate the impulse
-		Vec3 drag_impulse = (0.5f * fluid_density * inLinearDrag * area * inDeltaTime) * relative_center_of_buoyancy_velocity * relative_center_of_buoyancy_velocity.Length();
-
-		// Clamp magnitude against current linear velocity to prevent overshoot
-		float linear_velocity_len_sq = linear_velocity.LengthSq();
-		float drag_delta_linear_velocity_len_sq = (drag_impulse * inverse_mass).LengthSq();
-		if (drag_delta_linear_velocity_len_sq > linear_velocity_len_sq)
-			drag_impulse *= sqrt(linear_velocity_len_sq / drag_delta_linear_velocity_len_sq);
-
-		// Calculate the resulting delta linear velocity due to buoyancy and drag
-		Vec3 delta_linear_velocity = (drag_impulse + buoyancy_impulse) * inverse_mass;
-		mMotionProperties->AddLinearVelocityStep(delta_linear_velocity);
-
-		// Determine average width of the body (across the three axis)
-		float l = (size.GetX() + size.GetY() + size.GetZ()) / 3.0f;
-
-		// Drag torque = -Angular Drag * Mass * Submerged volume / Total volume * (Average width of body)^2 * Angular velocity (eq 2.5.15)
-		Vec3 drag_angular_impulse = (-inAngularDrag * inSubmergedVolume / inTotalVolume * inDeltaTime * Square(l) / inverse_mass) * angular_velocity;
-		Mat44 inv_inertia = GetInverseInertia();
-		Vec3 drag_delta_angular_velocity = inv_inertia * drag_angular_impulse;
-
-		// Clamp magnitude against the current angular velocity to prevent overshoot
-		float angular_velocity_len_sq = angular_velocity.LengthSq();
-		float drag_delta_angular_velocity_len_sq = drag_delta_angular_velocity.LengthSq();
-		if (drag_delta_angular_velocity_len_sq > angular_velocity_len_sq)
-			drag_delta_angular_velocity *= sqrt(angular_velocity_len_sq / drag_delta_angular_velocity_len_sq);
-
-		// Calculate total delta angular velocity due to drag and buoyancy
-		Vec3 delta_angular_velocity = drag_delta_angular_velocity + inv_inertia * inRelativeCenterOfBuoyancy.Cross(buoyancy_impulse + drag_impulse);
-		mMotionProperties->AddAngularVelocityStep(delta_angular_velocity);
-		return true;
-	}
-
-	return false;
-}
-
-bool Body::ApplyBuoyancyImpulse(RVec3Arg inSurfacePosition, Vec3Arg inSurfaceNormal, float inBuoyancy, float inLinearDrag, float inAngularDrag, Vec3Arg inFluidVelocity, Vec3Arg inGravity, float inDeltaTime)
-{
-	JPH_PROFILE_FUNCTION();
-
-	float total_volume, submerged_volume;
-	Vec3 relative_center_of_buoyancy;
-	GetSubmergedVolume(inSurfacePosition, inSurfaceNormal, total_volume, submerged_volume, relative_center_of_buoyancy);
-
-	return ApplyBuoyancyImpulse(total_volume, submerged_volume, relative_center_of_buoyancy, inBuoyancy, inLinearDrag, inAngularDrag, inFluidVelocity, inGravity, inDeltaTime);
-}
-
-void Body::SaveState(StateRecorder &inStream) const
-{
-	// Only write properties that can change at runtime
-	inStream.Write(mPosition);
-	inStream.Write(mRotation);
-
-	if (mMotionProperties != nullptr)
-	{
-		if (IsSoftBody())
-			static_cast<const SoftBodyMotionProperties *>(mMotionProperties)->SaveState(inStream);
-		else
-			mMotionProperties->SaveState(inStream);
-	}
-}
-
-void Body::RestoreState(StateRecorder &inStream)
-{
-	inStream.Read(mPosition);
-	inStream.Read(mRotation);
-
-	if (mMotionProperties != nullptr)
-	{
-		if (IsSoftBody())
-			static_cast<SoftBodyMotionProperties *>(mMotionProperties)->RestoreState(inStream);
-		else
-			mMotionProperties->RestoreState(inStream);
-
-		JPH_IF_ENABLE_ASSERTS(mMotionProperties->mCachedMotionType = mMotionType);
-	}
-
-	// Initialize bounding box
-	CalculateWorldSpaceBoundsInternal();
-}
-
-BodyCreationSettings Body::GetBodyCreationSettings() const
-{
-	JPH_ASSERT(IsRigidBody());
-
-	BodyCreationSettings result;
-
-	result.mPosition = GetPosition();
-	result.mRotation = GetRotation();
-	result.mLinearVelocity = mMotionProperties != nullptr? mMotionProperties->GetLinearVelocity() : Vec3::sZero();
-	result.mAngularVelocity = mMotionProperties != nullptr? mMotionProperties->GetAngularVelocity() : Vec3::sZero();
-	result.mObjectLayer = GetObjectLayer();
-	result.mUserData = mUserData;
-	result.mCollisionGroup = GetCollisionGroup();
-	result.mMotionType = GetMotionType();
-	result.mAllowedDOFs = mMotionProperties != nullptr? mMotionProperties->GetAllowedDOFs() : EAllowedDOFs::All;
-	result.mAllowDynamicOrKinematic = mMotionProperties != nullptr;
-	result.mIsSensor = IsSensor();
-	result.mCollideKinematicVsNonDynamic = GetCollideKinematicVsNonDynamic();
-	result.mUseManifoldReduction = GetUseManifoldReduction();
-	result.mApplyGyroscopicForce = GetApplyGyroscopicForce();
-	result.mMotionQuality = mMotionProperties != nullptr? mMotionProperties->GetMotionQuality() : EMotionQuality::Discrete;
-	result.mEnhancedInternalEdgeRemoval = GetEnhancedInternalEdgeRemoval();
-	result.mAllowSleeping = mMotionProperties != nullptr? GetAllowSleeping() : true;
-	result.mFriction = GetFriction();
-	result.mRestitution = GetRestitution();
-	result.mLinearDamping = mMotionProperties != nullptr? mMotionProperties->GetLinearDamping() : 0.0f;
-	result.mAngularDamping = mMotionProperties != nullptr? mMotionProperties->GetAngularDamping() : 0.0f;
-	result.mMaxLinearVelocity = mMotionProperties != nullptr? mMotionProperties->GetMaxLinearVelocity() : 0.0f;
-	result.mMaxAngularVelocity = mMotionProperties != nullptr? mMotionProperties->GetMaxAngularVelocity() : 0.0f;
-	result.mGravityFactor = mMotionProperties != nullptr? mMotionProperties->GetGravityFactor() : 1.0f;
-	result.mNumVelocityStepsOverride = mMotionProperties != nullptr? mMotionProperties->GetNumVelocityStepsOverride() : 0;
-	result.mNumPositionStepsOverride = mMotionProperties != nullptr? mMotionProperties->GetNumPositionStepsOverride() : 0;
-	result.mOverrideMassProperties = EOverrideMassProperties::MassAndInertiaProvided;
-
-	// Invert inertia and mass
-	if (mMotionProperties != nullptr)
-	{
-		float inv_mass = mMotionProperties->GetInverseMassUnchecked();
-		Mat44 inv_inertia = mMotionProperties->GetLocalSpaceInverseInertiaUnchecked();
-
-		// Get mass
-		result.mMassPropertiesOverride.mMass = inv_mass != 0.0f? 1.0f / inv_mass : FLT_MAX;
-
-		// Get inertia
-		Mat44 inertia;
-		if (inertia.SetInversed3x3(inv_inertia))
-		{
-			// Inertia was invertible, we can use it
-			result.mMassPropertiesOverride.mInertia = inertia;
-		}
-		else
-		{
-			// Prevent division by zero
-			Vec3 diagonal = Vec3::sMax(inv_inertia.GetDiagonal3(), Vec3::sReplicate(FLT_MIN));
-			result.mMassPropertiesOverride.mInertia = Mat44::sScale(diagonal.Reciprocal());
-		}
-	}
-	else
-	{
-		result.mMassPropertiesOverride.mMass = FLT_MAX;
-		result.mMassPropertiesOverride.mInertia = Mat44::sScale(Vec3::sReplicate(FLT_MAX));
-	}
-
-	result.SetShape(GetShape());
-
-	return result;
-}
-
-SoftBodyCreationSettings Body::GetSoftBodyCreationSettings() const
-{
-	JPH_ASSERT(IsSoftBody());
-
-	SoftBodyCreationSettings result;
-
-	result.mPosition = GetPosition();
-	result.mRotation = GetRotation();
-	result.mUserData = mUserData;
-	result.mObjectLayer = GetObjectLayer();
-	result.mCollisionGroup = GetCollisionGroup();
-	result.mFriction = GetFriction();
-	result.mRestitution = GetRestitution();
-	const SoftBodyMotionProperties *mp = static_cast<const SoftBodyMotionProperties *>(mMotionProperties);
-	result.mNumIterations = mp->GetNumIterations();
-	result.mLinearDamping = mp->GetLinearDamping();
-	result.mMaxLinearVelocity = mp->GetMaxLinearVelocity();
-	result.mGravityFactor = mp->GetGravityFactor();
-	result.mPressure = mp->GetPressure();
-	result.mUpdatePosition = mp->GetUpdatePosition();
-	result.mVertexRadius = mp->GetVertexRadius();
-	result.mAllowSleeping = mp->GetAllowSleeping();
-	result.mFacesDoubleSided = mp->GetFacesDoubleSided();
-	result.mSettings = mp->GetSettings();
-
-	return result;
-}
-
-JPH_NAMESPACE_END