@bloomengine/engine 0.4.0 → 0.4.1

package/native/third_party/JoltPhysics/Jolt/Physics/Collision/Shape/TaperedCylinderShape.cpp

@@ -1,691 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2024 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#include <Jolt/Jolt.h>
-
-#include <Jolt/Physics/Collision/Shape/TaperedCylinderShape.h>
-#include <Jolt/Physics/Collision/Shape/CylinderShape.h>
-#include <Jolt/Physics/Collision/Shape/ScaleHelpers.h>
-#include <Jolt/Physics/Collision/CollidePointResult.h>
-#include <Jolt/Physics/Collision/TransformedShape.h>
-#include <Jolt/Physics/Collision/CollideSoftBodyVertexIterator.h>
-#include <Jolt/ObjectStream/TypeDeclarations.h>
-#include <Jolt/Core/StreamIn.h>
-#include <Jolt/Core/StreamOut.h>
-#ifdef JPH_DEBUG_RENDERER
-	#include <Jolt/Renderer/DebugRenderer.h>
-#endif // JPH_DEBUG_RENDERER
-
-JPH_NAMESPACE_BEGIN
-
-// Approximation of a face of the tapered cylinder
-static const Vec3 cTaperedCylinderFace[] =
-{
-	Vec3(0.0f,			0.0f,	1.0f),
-	Vec3(0.707106769f,	0.0f,	0.707106769f),
-	Vec3(1.0f,			0.0f,	0.0f),
-	Vec3(0.707106769f,	0.0f,	-0.707106769f),
-	Vec3(-0.0f,			0.0f,	-1.0f),
-	Vec3(-0.707106769f,	0.0f,	-0.707106769f),
-	Vec3(-1.0f,			0.0f,	0.0f),
-	Vec3(-0.707106769f,	0.0f,	0.707106769f)
-};
-
-JPH_IMPLEMENT_SERIALIZABLE_VIRTUAL(TaperedCylinderShapeSettings)
-{
-	JPH_ADD_BASE_CLASS(TaperedCylinderShapeSettings, ConvexShapeSettings)
-
-	JPH_ADD_ATTRIBUTE(TaperedCylinderShapeSettings, mHalfHeight)
-	JPH_ADD_ATTRIBUTE(TaperedCylinderShapeSettings, mTopRadius)
-	JPH_ADD_ATTRIBUTE(TaperedCylinderShapeSettings, mBottomRadius)
-	JPH_ADD_ATTRIBUTE(TaperedCylinderShapeSettings, mConvexRadius)
-}
-
-ShapeSettings::ShapeResult TaperedCylinderShapeSettings::Create() const
-{
-	if (mCachedResult.IsEmpty())
-	{
-		Ref<Shape> shape;
-		if (mTopRadius == mBottomRadius)
-		{
-			// Convert to regular cylinder
-			CylinderShapeSettings settings;
-			settings.mHalfHeight = mHalfHeight;
-			settings.mRadius = mTopRadius;
-			settings.mMaterial = mMaterial;
-			settings.mConvexRadius = mConvexRadius;
-			shape = new CylinderShape(settings, mCachedResult);
-		}
-		else
-		{
-			// Normal tapered cylinder shape
-			shape = new TaperedCylinderShape(*this, mCachedResult);
-		}
-	}
-	return mCachedResult;
-}
-
-TaperedCylinderShapeSettings::TaperedCylinderShapeSettings(float inHalfHeightOfTaperedCylinder, float inTopRadius, float inBottomRadius, float inConvexRadius, const PhysicsMaterial *inMaterial) :
-	ConvexShapeSettings(inMaterial),
-	mHalfHeight(inHalfHeightOfTaperedCylinder),
-	mTopRadius(inTopRadius),
-	mBottomRadius(inBottomRadius),
-	mConvexRadius(inConvexRadius)
-{
-}
-
-TaperedCylinderShape::TaperedCylinderShape(const TaperedCylinderShapeSettings &inSettings, ShapeResult &outResult) :
-	ConvexShape(EShapeSubType::TaperedCylinder, inSettings, outResult),
-	mTopRadius(inSettings.mTopRadius),
-	mBottomRadius(inSettings.mBottomRadius),
-	mConvexRadius(min(inSettings.mConvexRadius, min(inSettings.mTopRadius, inSettings.mBottomRadius)))
-{
-	if (mTopRadius < 0.0f)
-	{
-		outResult.SetError("Invalid top radius");
-		return;
-	}
-
-	if (mBottomRadius < 0.0f)
-	{
-		outResult.SetError("Invalid bottom radius");
-		return;
-	}
-
-	if (mConvexRadius < 0.0f)
-	{
-		outResult.SetError("Invalid convex radius");
-		return;
-	}
-
-	if (inSettings.mHalfHeight <= 0.0f)
-	{
-		outResult.SetError("Invalid height");
-		return;
-	}
-
-	// Calculate the center of mass (using wxMaxima).
-	// Radius of cross section for tapered cylinder from 0 to h:
-	// r(x):=br+x*(tr-br)/h;
-	// Area:
-	// area(x):=%pi*r(x)^2;
-	// Total volume of cylinder:
-	// volume(h):=integrate(area(x),x,0,h);
-	// Center of mass:
-	// com(br,tr,h):=integrate(x*area(x),x,0,h)/volume(h);
-	// Results:
-	// ratsimp(com(br,tr,h),br,bt);
-	// Non-tapered cylinder should have com = 0.5:
-	// ratsimp(com(r,r,h));
-	// Cone with tip at origin and height h should have com = 3/4 h
-	// ratsimp(com(0,r,h));
-	float h = 2.0f * inSettings.mHalfHeight;
-	float tr = mTopRadius;
-	float tr2 = Square(tr);
-	float br = mBottomRadius;
-	float br2 = Square(br);
-	float com = h * (3 * tr2 + 2 * br * tr + br2) / (4.0f * (tr2 + br * tr + br2));
-	mTop = h - com;
-	mBottom = -com;
-
-	outResult.Set(this);
-}
-
-class TaperedCylinderShape::TaperedCylinder final : public Support
-{
-public:
-					TaperedCylinder(float inTop, float inBottom, float inTopRadius, float inBottomRadius, float inConvexRadius) :
-		mTop(inTop),
-		mBottom(inBottom),
-		mTopRadius(inTopRadius),
-		mBottomRadius(inBottomRadius),
-		mConvexRadius(inConvexRadius)
-	{
-		static_assert(sizeof(TaperedCylinder) <= sizeof(SupportBuffer), "Buffer size too small");
-		JPH_ASSERT(IsAligned(this, alignof(TaperedCylinder)));
-	}
-
-	virtual Vec3	GetSupport(Vec3Arg inDirection) const override
-	{
-		float x = inDirection.GetX(), y = inDirection.GetY(), z = inDirection.GetZ();
-		float o = sqrt(Square(x) + Square(z));
-		if (o > 0.0f)
-		{
-			Vec3 top_support((mTopRadius * x) / o, mTop, (mTopRadius * z) / o);
-			Vec3 bottom_support((mBottomRadius * x) / o, mBottom, (mBottomRadius * z) / o);
-			return inDirection.Dot(top_support) > inDirection.Dot(bottom_support)? top_support : bottom_support;
-		}
-		else
-		{
-			if (y > 0.0f)
-				return Vec3(0, mTop, 0);
-			else
-				return Vec3(0, mBottom, 0);
-		}
-	}
-
-	virtual float	GetConvexRadius() const override
-	{
-		return mConvexRadius;
-	}
-
-private:
-	float			mTop;
-	float			mBottom;
-	float			mTopRadius;
-	float			mBottomRadius;
-	float			mConvexRadius;
-};
-
-JPH_INLINE void TaperedCylinderShape::GetScaled(Vec3Arg inScale, float &outTop, float &outBottom, float &outTopRadius, float &outBottomRadius, float &outConvexRadius) const
-{
-	Vec3 abs_scale = inScale.Abs();
-	float scale_xz = abs_scale.GetX();
-	float scale_y = inScale.GetY();
-
-	outTop = scale_y * mTop;
-	outBottom = scale_y * mBottom;
-	outTopRadius = scale_xz * mTopRadius;
-	outBottomRadius = scale_xz * mBottomRadius;
-	outConvexRadius = min(abs_scale.GetY(), scale_xz) * mConvexRadius;
-
-	// Negative Y-scale flips the top and bottom
-	if (outBottom > outTop)
-	{
-		std::swap(outTop, outBottom);
-		std::swap(outTopRadius, outBottomRadius);
-	}
-}
-
-const ConvexShape::Support *TaperedCylinderShape::GetSupportFunction(ESupportMode inMode, SupportBuffer &inBuffer, Vec3Arg inScale) const
-{
-	JPH_ASSERT(IsValidScale(inScale));
-
-	// Get scaled tapered cylinder
-	float top, bottom, top_radius, bottom_radius, convex_radius;
-	GetScaled(inScale, top, bottom, top_radius, bottom_radius, convex_radius);
-
-	switch (inMode)
-	{
-	case ESupportMode::IncludeConvexRadius:
-	case ESupportMode::Default:
-		return new (&inBuffer) TaperedCylinder(top, bottom, top_radius, bottom_radius, 0.0f);
-
-	case ESupportMode::ExcludeConvexRadius:
-		return new (&inBuffer) TaperedCylinder(top - convex_radius, bottom + convex_radius, top_radius - convex_radius, bottom_radius - convex_radius, convex_radius);
-	}
-
-	JPH_ASSERT(false);
-	return nullptr;
-}
-
-JPH_INLINE static Vec3 sCalculateSideNormalXZ(Vec3Arg inSurfacePosition)
-{
-	return (Vec3(1, 0, 1) * inSurfacePosition).NormalizedOr(Vec3::sAxisX());
-}
-
-JPH_INLINE static Vec3 sCalculateSideNormal(Vec3Arg inNormalXZ, float inTop, float inBottom, float inTopRadius, float inBottomRadius)
-{
-	float tan_alpha = (inBottomRadius - inTopRadius) / (inTop - inBottom);
-	return Vec3(inNormalXZ.GetX(), tan_alpha, inNormalXZ.GetZ()).Normalized();
-}
-
-void TaperedCylinderShape::GetSupportingFace(const SubShapeID &inSubShapeID, Vec3Arg inDirection, Vec3Arg inScale, Mat44Arg inCenterOfMassTransform, SupportingFace &outVertices) const
-{
-	JPH_ASSERT(inSubShapeID.IsEmpty(), "Invalid subshape ID");
-	JPH_ASSERT(IsValidScale(inScale));
-
-	// Get scaled tapered cylinder
-	float top, bottom, top_radius, bottom_radius, convex_radius;
-	GetScaled(inScale, top, bottom, top_radius, bottom_radius, convex_radius);
-
-	// Get the normal of the side of the cylinder
-	Vec3 normal_xz = sCalculateSideNormalXZ(-inDirection);
-	Vec3 normal = sCalculateSideNormal(normal_xz, top, bottom, top_radius, bottom_radius);
-
-	constexpr float cMinRadius = 1.0e-3f;
-
-	// Check if the normal is closer to the side than to the top or bottom
-	if (abs(normal.Dot(inDirection)) > abs(inDirection.GetY()))
-	{
-		// Return the side of the cylinder
-		outVertices.push_back(inCenterOfMassTransform * (normal_xz * top_radius + Vec3(0, top, 0)));
-		outVertices.push_back(inCenterOfMassTransform * (normal_xz * bottom_radius + Vec3(0, bottom, 0)));
-	}
-	else
-	{
-		// When the inDirection is more than 5 degrees from vertical, align the vertices so that 1 of the vertices
-		// points towards inDirection in the XZ plane. This ensures that we always have a vertex towards max penetration depth.
-		Mat44 transform = inCenterOfMassTransform;
-		Vec4 base_x = Vec4(inDirection.GetX(), 0, inDirection.GetZ(), 0);
-		float xz_sq = base_x.LengthSq();
-		float y_sq = Square(inDirection.GetY());
-		if (xz_sq > 0.00765427f * y_sq)
-		{
-			base_x /= sqrt(xz_sq);
-			Vec4 base_z = base_x.Swizzle<SWIZZLE_Z, SWIZZLE_Y, SWIZZLE_X, SWIZZLE_W>() * Vec4(-1, 0, 1, 0);
-			transform = transform * Mat44(base_x, Vec4(0, 1, 0, 0), base_z, Vec4(0, 0, 0, 1));
-		}
-
-		if (inDirection.GetY() < 0.0f)
-		{
-			// Top of the cylinder
-			if (top_radius > cMinRadius)
-			{
-				Vec3 top_3d(0, top, 0);
-				for (Vec3 v : cTaperedCylinderFace)
-					outVertices.push_back(transform * (top_radius * v + top_3d));
-			}
-		}
-		else
-		{
-			// Bottom of the cylinder
-			if (bottom_radius > cMinRadius)
-			{
-				Vec3 bottom_3d(0, bottom, 0);
-				for (const Vec3 *v = cTaperedCylinderFace + std::size(cTaperedCylinderFace) - 1; v >= cTaperedCylinderFace; --v)
-					outVertices.push_back(transform * (bottom_radius * *v + bottom_3d));
-			}
-		}
-	}
-}
-
-MassProperties TaperedCylinderShape::GetMassProperties() const
-{
-	MassProperties p;
-
-	// Calculate mass
-	float density = GetDensity();
-	p.mMass = GetVolume() * density;
-
-	// Calculate inertia of a tapered cylinder (using wxMaxima)
-	// Radius:
-	// r(x):=br+(x-b)*(tr-br)/(t-b);
-	// Where t=top, b=bottom, tr=top radius, br=bottom radius
-	// Area of the cross section of the cylinder at x:
-	// area(x):=%pi*r(x)^2;
-	// Inertia x slice at x (using inertia of a solid disc, see https://en.wikipedia.org/wiki/List_of_moments_of_inertia, note needs to be multiplied by density):
-	// dix(x):=area(x)*r(x)^2/4;
-	// Inertia y slice at y (note needs to be multiplied by density)
-	// diy(x):=area(x)*r(x)^2/2;
-	// Volume:
-	// volume(b,t):=integrate(area(x),x,b,t);
-	// The constant density (note that we have this through GetDensity() so we'll use that instead):
-	// density(b,t):=m/volume(b,t);
-	// Inertia tensor element xx, note that we use the parallel axis theorem to move the inertia: Ixx' = Ixx + m translation^2, also note we multiply by density here:
-	// Ixx(br,tr,b,t):=integrate(dix(x)+area(x)*x^2,x,b,t)*density(b,t);
-	// Inertia tensor element yy:
-	// Iyy(br,tr,b,t):=integrate(diy(x),x,b,t)*density(b,t);
-	// Note that we can simplify Ixx by using:
-	// Ixx_delta(br,tr,b,t):=Ixx(br,tr,b,t)-Iyy(br,tr,b,t)/2;
-	// For a cylinder this formula matches what is listed on the wiki:
-	// factor(Ixx(r,r,-h/2,h/2));
-	// factor(Iyy(r,r,-h/2,h/2));
-	// For a cone with tip at origin too:
-	// factor(Ixx(0,r,0,h));
-	// factor(Iyy(0,r,0,h));
-	// Now for the tapered cylinder:
-	// rat(Ixx(br,tr,b,t),br,bt);
-	// rat(Iyy(br,tr,b,t),br,bt);
-	// rat(Ixx_delta(br,tr,b,t),br,bt);
-	float t = mTop;
-	float t2 = Square(t);
-	float t3 = t * t2;
-
-	float b = mBottom;
-	float b2 = Square(b);
-	float b3 = b * b2;
-
-	float br = mBottomRadius;
-	float br2 = Square(br);
-	float br3 = br * br2;
-	float br4 = Square(br2);
-
-	float tr = mTopRadius;
-	float tr2 = Square(tr);
-	float tr3 = tr * tr2;
-	float tr4 = Square(tr2);
-
-	float inertia_y = (JPH_PI / 10.0f) * density * (t - b) * (br4 + tr * br3 + tr2 * br2 + tr3 * br + tr4);
-	float inertia_x_delta = (JPH_PI / 30.0f) * density * ((t3 + 2 * b * t2 + 3 * b2 * t - 6 * b3) * br2 + (3 * t3 + b * t2 - b2 * t - 3 * b3) * tr * br + (6 * t3 - 3 * b * t2 - 2 * b2 * t - b3) * tr2);
-	float inertia_x = inertia_x_delta + inertia_y / 2;
-	float inertia_z = inertia_x;
-	p.mInertia = Mat44::sScale(Vec3(inertia_x, inertia_y, inertia_z));
-	return p;
-}
-
-Vec3 TaperedCylinderShape::GetSurfaceNormal(const SubShapeID &inSubShapeID, Vec3Arg inLocalSurfacePosition) const
-{
-	JPH_ASSERT(inSubShapeID.IsEmpty(), "Invalid subshape ID");
-
-	constexpr float cEpsilon = 1.0e-5f;
-
-	if (inLocalSurfacePosition.GetY() > mTop - cEpsilon)
-		return Vec3(0, 1, 0);
-	else if (inLocalSurfacePosition.GetY() < mBottom + cEpsilon)
-		return Vec3(0, -1, 0);
-	else
-		return sCalculateSideNormal(sCalculateSideNormalXZ(inLocalSurfacePosition), mTop, mBottom, mTopRadius, mBottomRadius);
-}
-
-AABox TaperedCylinderShape::GetLocalBounds() const
-{
-	float max_radius = max(mTopRadius, mBottomRadius);
-	return AABox(Vec3(-max_radius, mBottom, -max_radius), Vec3(max_radius, mTop, max_radius));
-}
-
-void TaperedCylinderShape::CollidePoint(Vec3Arg inPoint, const SubShapeIDCreator &inSubShapeIDCreator, CollidePointCollector &ioCollector, const ShapeFilter &inShapeFilter) const
-{
-	// Test shape filter
-	if (!inShapeFilter.ShouldCollide(this, inSubShapeIDCreator.GetID()))
-		return;
-
-	// Check if the point is in the tapered cylinder
-	if (inPoint.GetY() >= mBottom && inPoint.GetY() <= mTop // Within height
-		&& Square(inPoint.GetX()) + Square(inPoint.GetZ()) <= Square(mBottomRadius + (inPoint.GetY() - mBottom) * (mTopRadius - mBottomRadius) / (mTop - mBottom))) // Within the radius
-		ioCollector.AddHit({ TransformedShape::sGetBodyID(ioCollector.GetContext()), inSubShapeIDCreator.GetID() });
-}
-
-void TaperedCylinderShape::CollideSoftBodyVertices(Mat44Arg inCenterOfMassTransform, Vec3Arg inScale, const CollideSoftBodyVertexIterator &inVertices, uint inNumVertices, int inCollidingShapeIndex) const
-{
-	JPH_ASSERT(IsValidScale(inScale));
-
-	Mat44 inverse_transform = inCenterOfMassTransform.InversedRotationTranslation();
-
-	// Get scaled tapered cylinder
-	float top, bottom, top_radius, bottom_radius, convex_radius;
-	GetScaled(inScale, top, bottom, top_radius, bottom_radius, convex_radius);
-	Vec3 top_3d(0, top, 0);
-	Vec3 bottom_3d(0, bottom, 0);
-
-	for (CollideSoftBodyVertexIterator v = inVertices, sbv_end = inVertices + inNumVertices; v != sbv_end; ++v)
-		if (v.GetInvMass() > 0.0f)
-		{
-			Vec3 local_pos = inverse_transform * v.GetPosition();
-
-			// Calculate penetration into side surface
-			Vec3 normal_xz = sCalculateSideNormalXZ(local_pos);
-			Vec3 side_normal = sCalculateSideNormal(normal_xz, top, bottom, top_radius, bottom_radius);
-			Vec3 side_support_top = normal_xz * top_radius + top_3d;
-			float side_penetration = (side_support_top - local_pos).Dot(side_normal);
-
-			// Calculate penetration into top and bottom plane
-			float top_penetration = top - local_pos.GetY();
-			float bottom_penetration = local_pos.GetY() - bottom;
-			float min_top_bottom_penetration = min(top_penetration, bottom_penetration);
-
-			Vec3 point, normal;
-			if (side_penetration < 0.0f || min_top_bottom_penetration < 0.0f)
-			{
-				// We're outside the cylinder
-				// Calculate the closest point on the line segment from bottom to top support point:
-				// closest_point = bottom + fraction * (top - bottom) / |top - bottom|^2
-				Vec3 side_support_bottom = normal_xz * bottom_radius + bottom_3d;
-				Vec3 bottom_to_top = side_support_top - side_support_bottom;
-				float fraction = (local_pos - side_support_bottom).Dot(bottom_to_top);
-
-				// Calculate the distance to the axis of the cylinder
-				float distance_to_axis = normal_xz.Dot(local_pos);
-				bool inside_top_radius = distance_to_axis <= top_radius;
-				bool inside_bottom_radius = distance_to_axis <= bottom_radius;
-
-				/*
-					Regions of tapered cylinder (side view):
-
-						_  B |       |
-						 --_ |   A   |
-							 t-------+
-					   C    /         \
-						   /  tapered  \
-					_     /  cylinder   \
-					 --_ /               \
-						b-----------------+
-					 D  |        E        |
-						|                 |
-
-					t = side_support_top, b = side_support_bottom
-					Lines between B and C and C and D are at a 90 degree angle to the line between t and b
-				*/
-				if (fraction >= bottom_to_top.LengthSq() // Region B: Above the line segment
-					&& !inside_top_radius) // Outside the top radius
-				{
-					// Top support point is closest
-					point = side_support_top;
-					normal = (local_pos - point).NormalizedOr(Vec3::sAxisY());
-				}
-				else if (fraction < 0.0f // Region D: Below the line segment
-					&& !inside_bottom_radius) // Outside the bottom radius
-				{
-					// Bottom support point is closest
-					point = side_support_bottom;
-					normal = (local_pos - point).NormalizedOr(Vec3::sAxisY());
-				}
-				else if (top_penetration < 0.0f // Region A: Above the top plane
-					&& inside_top_radius) // Inside the top radius
-				{
-					// Top plane is closest
-					point = top_3d;
-					normal = Vec3(0, 1, 0);
-				}
-				else if (bottom_penetration < 0.0f // Region E: Below the bottom plane
-					&& inside_bottom_radius) // Inside the bottom radius
-				{
-					// Bottom plane is closest
-					point = bottom_3d;
-					normal = Vec3(0, -1, 0);
-				}
-				else // Region C
-				{
-					// Side surface is closest
-					point = side_support_top;
-					normal = side_normal;
-				}
-			}
-			else if (side_penetration < min_top_bottom_penetration)
-			{
-				// Side surface is closest
-				point = side_support_top;
-				normal = side_normal;
-			}
-			else if (top_penetration < bottom_penetration)
-			{
-				// Top plane is closest
-				point = top_3d;
-				normal = Vec3(0, 1, 0);
-			}
-			else
-			{
-				// Bottom plane is closest
-				point = bottom_3d;
-				normal = Vec3(0, -1, 0);
-			}
-
-			// Calculate penetration
-			Plane plane = Plane::sFromPointAndNormal(point, normal);
-			float penetration = -plane.SignedDistance(local_pos);
-			if (v.UpdatePenetration(penetration))
-				v.SetCollision(plane.GetTransformed(inCenterOfMassTransform), inCollidingShapeIndex);
-		}
-}
-
-class TaperedCylinderShape::TCSGetTrianglesContext
-{
-public:
-	explicit	TCSGetTrianglesContext(Mat44Arg inTransform) : mTransform(inTransform) { }
-
-	Mat44		mTransform;
-	uint		mProcessed = 0; // Which elements we processed, bit 0 = top, bit 1 = bottom, bit 2 = side
-};
-
-void TaperedCylinderShape::GetTrianglesStart(GetTrianglesContext &ioContext, const AABox &inBox, Vec3Arg inPositionCOM, QuatArg inRotation, Vec3Arg inScale) const
-{
-	static_assert(sizeof(TCSGetTrianglesContext) <= sizeof(GetTrianglesContext), "GetTrianglesContext too small");
-	JPH_ASSERT(IsAligned(&ioContext, alignof(TCSGetTrianglesContext)));
-
-	// Make sure the scale is not inside out
-	Vec3 scale = ScaleHelpers::IsInsideOut(inScale)? inScale.FlipSign<-1, 1, 1>() : inScale;
-
-	// Mark top and bottom processed if their radius is too small
-	TCSGetTrianglesContext *context = new (&ioContext) TCSGetTrianglesContext(Mat44::sRotationTranslation(inRotation, inPositionCOM) * Mat44::sScale(scale));
-	constexpr float cMinRadius = 1.0e-3f;
-	if (mTopRadius < cMinRadius)
-		context->mProcessed |= 0b001;
-	if (mBottomRadius < cMinRadius)
-		context->mProcessed |= 0b010;
-}
-
-int TaperedCylinderShape::GetTrianglesNext(GetTrianglesContext &ioContext, int inMaxTrianglesRequested, Float3 *outTriangleVertices, const PhysicsMaterial **outMaterials) const
-{
-	constexpr int cNumVertices = int(std::size(cTaperedCylinderFace));
-
-	static_assert(cGetTrianglesMinTrianglesRequested >= 2 * cNumVertices);
-	JPH_ASSERT(inMaxTrianglesRequested >= cGetTrianglesMinTrianglesRequested);
-
-	TCSGetTrianglesContext &context = (TCSGetTrianglesContext &)ioContext;
-
-	int total_num_triangles = 0;
-
-	// Top cap
-	Vec3 top_3d(0, mTop, 0);
-	if ((context.mProcessed & 0b001) == 0)
-	{
-		Vec3 v0 = context.mTransform * (top_3d + mTopRadius * cTaperedCylinderFace[0]);
-		Vec3 v1 = context.mTransform * (top_3d + mTopRadius * cTaperedCylinderFace[1]);
-
-		for (const Vec3 *v = cTaperedCylinderFace + 2, *v_end = cTaperedCylinderFace + cNumVertices; v < v_end; ++v)
-		{
-			Vec3 v2 = context.mTransform * (top_3d + mTopRadius * *v);
-
-			v0.StoreFloat3(outTriangleVertices++);
-			v1.StoreFloat3(outTriangleVertices++);
-			v2.StoreFloat3(outTriangleVertices++);
-
-			v1 = v2;
-		}
-
-		total_num_triangles = cNumVertices - 2;
-		context.mProcessed |= 0b001;
-	}
-
-	// Bottom cap
-	Vec3 bottom_3d(0, mBottom, 0);
-	if ((context.mProcessed & 0b010) == 0
-		&& total_num_triangles + cNumVertices - 2 < inMaxTrianglesRequested)
-	{
-		Vec3 v0 = context.mTransform * (bottom_3d + mBottomRadius * cTaperedCylinderFace[0]);
-		Vec3 v1 = context.mTransform * (bottom_3d + mBottomRadius * cTaperedCylinderFace[1]);
-
-		for (const Vec3 *v = cTaperedCylinderFace + 2, *v_end = cTaperedCylinderFace + cNumVertices; v < v_end; ++v)
-		{
-			Vec3 v2 = context.mTransform * (bottom_3d + mBottomRadius * *v);
-
-			v0.StoreFloat3(outTriangleVertices++);
-			v2.StoreFloat3(outTriangleVertices++);
-			v1.StoreFloat3(outTriangleVertices++);
-
-			v1 = v2;
-		}
-
-		total_num_triangles += cNumVertices - 2;
-		context.mProcessed |= 0b010;
-	}
-
-	// Side
-	if ((context.mProcessed & 0b100) == 0
-		&& total_num_triangles + 2 * cNumVertices < inMaxTrianglesRequested)
-	{
-		Vec3 v0t = context.mTransform * (top_3d + mTopRadius * cTaperedCylinderFace[cNumVertices - 1]);
-		Vec3 v0b = context.mTransform * (bottom_3d + mBottomRadius * cTaperedCylinderFace[cNumVertices - 1]);
-
-		for (const Vec3 *v = cTaperedCylinderFace, *v_end = cTaperedCylinderFace + cNumVertices; v < v_end; ++v)
-		{
-			Vec3 v1t = context.mTransform * (top_3d + mTopRadius * *v);
-			v0t.StoreFloat3(outTriangleVertices++);
-			v0b.StoreFloat3(outTriangleVertices++);
-			v1t.StoreFloat3(outTriangleVertices++);
-
-			Vec3 v1b = context.mTransform * (bottom_3d + mBottomRadius * *v);
-			v1t.StoreFloat3(outTriangleVertices++);
-			v0b.StoreFloat3(outTriangleVertices++);
-			v1b.StoreFloat3(outTriangleVertices++);
-
-			v0t = v1t;
-			v0b = v1b;
-		}
-
-		total_num_triangles += 2 * cNumVertices;
-		context.mProcessed |= 0b100;
-	}
-
-	// Store materials
-	if (outMaterials != nullptr)
-	{
-		const PhysicsMaterial *material = GetMaterial();
-		for (const PhysicsMaterial **m = outMaterials, **m_end = outMaterials + total_num_triangles; m < m_end; ++m)
-			*m = material;
-	}
-
-	return total_num_triangles;
-}
-
-#ifdef JPH_DEBUG_RENDERER
-void TaperedCylinderShape::Draw(DebugRenderer *inRenderer, RMat44Arg inCenterOfMassTransform, Vec3Arg inScale, ColorArg inColor, bool inUseMaterialColors, bool inDrawWireframe) const
-{
-	// Preserve flip along y axis but make sure we're not inside out
-	Vec3 scale = ScaleHelpers::IsInsideOut(inScale)? inScale.FlipSign<-1, 1, 1>() : inScale;
-	RMat44 world_transform = inCenterOfMassTransform * Mat44::sScale(scale);
-
-	DebugRenderer::EDrawMode draw_mode = inDrawWireframe? DebugRenderer::EDrawMode::Wireframe : DebugRenderer::EDrawMode::Solid;
-	inRenderer->DrawTaperedCylinder(world_transform, mTop, mBottom, mTopRadius, mBottomRadius, inUseMaterialColors? GetMaterial()->GetDebugColor() : inColor, DebugRenderer::ECastShadow::On, draw_mode);
-}
-#endif // JPH_DEBUG_RENDERER
-
-void TaperedCylinderShape::SaveBinaryState(StreamOut &inStream) const
-{
-	ConvexShape::SaveBinaryState(inStream);
-
-	inStream.Write(mTop);
-	inStream.Write(mBottom);
-	inStream.Write(mTopRadius);
-	inStream.Write(mBottomRadius);
-	inStream.Write(mConvexRadius);
-}
-
-void TaperedCylinderShape::RestoreBinaryState(StreamIn &inStream)
-{
-	ConvexShape::RestoreBinaryState(inStream);
-
-	inStream.Read(mTop);
-	inStream.Read(mBottom);
-	inStream.Read(mTopRadius);
-	inStream.Read(mBottomRadius);
-	inStream.Read(mConvexRadius);
-}
-
-float TaperedCylinderShape::GetVolume() const
-{
-	// Volume of a tapered cylinder is: integrate(%pi*(b+x*(t-b)/h)^2,x,0,h) where t is the top radius, b is the bottom radius and h is the height
-	return (JPH_PI / 3.0f) * (mTop - mBottom) * (Square(mTopRadius) + mTopRadius * mBottomRadius + Square(mBottomRadius));
-}
-
-bool TaperedCylinderShape::IsValidScale(Vec3Arg inScale) const
-{
-	return ConvexShape::IsValidScale(inScale) && ScaleHelpers::IsUniformScaleXZ(inScale.Abs());
-}
-
-Vec3 TaperedCylinderShape::MakeScaleValid(Vec3Arg inScale) const
-{
-	Vec3 scale = ScaleHelpers::MakeNonZeroScale(inScale);
-
-	return scale.GetSign() * ScaleHelpers::MakeUniformScaleXZ(scale.Abs());
-}
-
-void TaperedCylinderShape::sRegister()
-{
-	ShapeFunctions &f = ShapeFunctions::sGet(EShapeSubType::TaperedCylinder);
-	f.mConstruct = []() -> Shape * { return new TaperedCylinderShape; };
-	f.mColor = Color::sGreen;
-}
-
-JPH_NAMESPACE_END