@bloomengine/engine 0.4.0 → 0.4.1

package/native/third_party/JoltPhysics/Jolt/Physics/SoftBody/SoftBodySharedSettings.h

@@ -1,390 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2023 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Core/Reference.h>
-#include <Jolt/Physics/Collision/PhysicsMaterial.h>
-#include <Jolt/Core/StreamUtils.h>
-
-JPH_NAMESPACE_BEGIN
-
-/// This class defines the setup of all particles and their constraints.
-/// It is used during the simulation and can be shared between multiple soft bodies.
-class JPH_EXPORT SoftBodySharedSettings : public RefTarget<SoftBodySharedSettings>
-{
-	JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, SoftBodySharedSettings)
-
-public:
-	/// Which type of bend constraint should be created
-	enum class EBendType
-	{
-		None,														///< No bend constraints will be created
-		Distance,													///< A simple distance constraint
-		Dihedral,													///< A dihedral bend constraint (most expensive, but also supports triangles that are initially not in the same plane)
-	};
-
-	/// The type of long range attachment constraint to create
-	enum class ELRAType
-	{
-		None,														///< Don't create a LRA constraint
-		EuclideanDistance,											///< Create a LRA constraint based on Euclidean distance between the closest kinematic vertex and this vertex
-		GeodesicDistance,											///< Create a LRA constraint based on the geodesic distance between the closest kinematic vertex and this vertex (follows the edge constraints)
-	};
-
-	/// Per vertex attributes used during the CreateConstraints function.
-	/// For an edge or shear constraint, the compliance is averaged between the two attached vertices.
-	/// For a bend constraint, the compliance is averaged between the two vertices on the shared edge.
-	struct JPH_EXPORT VertexAttributes
-	{
-		/// Constructor
-						VertexAttributes() = default;
-						VertexAttributes(float inCompliance, float inShearCompliance, float inBendCompliance, ELRAType inLRAType = ELRAType::None, float inLRAMaxDistanceMultiplier = 1.0f) : mCompliance(inCompliance), mShearCompliance(inShearCompliance), mBendCompliance(inBendCompliance), mLRAType(inLRAType), mLRAMaxDistanceMultiplier(inLRAMaxDistanceMultiplier) { }
-
-		float			mCompliance = 0.0f;							///< The compliance of the normal edges. Set to FLT_MAX to disable regular edges for any edge involving this vertex.
-		float			mShearCompliance = 0.0f;					///< The compliance of the shear edges. Set to FLT_MAX to disable shear edges for any edge involving this vertex.
-		float			mBendCompliance = FLT_MAX;					///< The compliance of the bend edges. Set to FLT_MAX to disable bend edges for any bend constraint involving this vertex.
-		ELRAType		mLRAType = ELRAType::None;					///< The type of long range attachment constraint to create.
-		float			mLRAMaxDistanceMultiplier = 1.0f;			///< Multiplier for the max distance of the LRA constraint, e.g. 1.01 means the max distance is 1% longer than the calculated distance in the rest pose.
-	};
-
-	/// Automatically create constraints based on the faces of the soft body
-	/// @param inVertexAttributes A list of attributes for each vertex (1-on-1 with mVertices, note that if the list is smaller than mVertices the last element will be repeated). This defines the properties of the constraints that are created.
-	/// @param inVertexAttributesLength The length of inVertexAttributes
-	/// @param inBendType The type of bend constraint to create
-	/// @param inAngleTolerance Shear edges are created when two connected triangles form a quad (are roughly in the same plane and form a square with roughly 90 degree angles). This defines the tolerance (in radians).
-	void				CreateConstraints(const VertexAttributes *inVertexAttributes, uint inVertexAttributesLength, EBendType inBendType = EBendType::Distance, float inAngleTolerance = DegreesToRadians(8.0f));
-
-	/// Calculate the initial lengths of all springs of the edges of this soft body (if you use CreateConstraint, this is already done)
-	void				CalculateEdgeLengths();
-
-	/// Calculate the properties of the rods
-	/// Note that this can swap mVertex of the RodStretchShear constraints if two rods are connected through a RodBendTwist constraint but point in opposite directions.
-	void				CalculateRodProperties();
-
-	/// Calculate the max lengths for the long range attachment constraints based on Euclidean distance (if you use CreateConstraints, this is already done)
-	/// @param inMaxDistanceMultiplier Multiplier for the max distance of the LRA constraint, e.g. 1.01 means the max distance is 1% longer than the calculated distance in the rest pose.
-	void				CalculateLRALengths(float inMaxDistanceMultiplier = 1.0f);
-
-	/// Calculate the constants for the bend constraints (if you use CreateConstraints, this is already done)
-	void				CalculateBendConstraintConstants();
-
-	/// Calculates the initial volume of all tetrahedra of this soft body
-	void				CalculateVolumeConstraintVolumes();
-
-	/// Calculate information needed to be able to calculate the skinned constraint normals at run-time
-	void				CalculateSkinnedConstraintNormals();
-
-	/// Information about the optimization of the soft body, the indices of certain elements may have changed.
-	class OptimizationResults
-	{
-	public:
-		Array<uint>		mEdgeRemap;									///< Maps old edge index to new edge index
-		Array<uint>		mLRARemap;									///< Maps old LRA index to new LRA index
-		Array<uint>		mRodStretchShearConstraintRemap;			///< Maps old rod stretch shear constraint index to new stretch shear rod constraint index
-		Array<uint>		mRodBendTwistConstraintRemap;				///< Maps old rod bend twist constraint index to new bend twist rod constraint index
-		Array<uint>		mDihedralBendRemap;							///< Maps old dihedral bend index to new dihedral bend index
-		Array<uint>		mVolumeRemap;								///< Maps old volume constraint index to new volume constraint index
-		Array<uint>		mSkinnedRemap;								///< Maps old skinned constraint index to new skinned constraint index
-	};
-
-	/// Optimize the soft body settings for simulation. This will reorder constraints so they can be executed in parallel.
-	void				Optimize(OptimizationResults &outResults);
-
-	/// Optimize the soft body settings without results
-	void				Optimize()									{ OptimizationResults results; Optimize(results); }
-
-	/// Clone this object
-	Ref<SoftBodySharedSettings> Clone() const;
-
-	/// Saves the state of this object in binary form to inStream. Doesn't store the material list.
-	void				SaveBinaryState(StreamOut &inStream) const;
-
-	/// Restore the state of this object from inStream. Doesn't restore the material list.
-	void				RestoreBinaryState(StreamIn &inStream);
-
-	using SharedSettingsToIDMap = StreamUtils::ObjectToIDMap<SoftBodySharedSettings>;
-	using IDToSharedSettingsMap = StreamUtils::IDToObjectMap<SoftBodySharedSettings>;
-	using MaterialToIDMap = StreamUtils::ObjectToIDMap<PhysicsMaterial>;
-	using IDToMaterialMap = StreamUtils::IDToObjectMap<PhysicsMaterial>;
-
-	/// Save this shared settings and its materials. Pass in an empty map ioSettingsMap / ioMaterialMap or reuse the same map while saving multiple settings objects to the same stream in order to avoid writing duplicates.
-	void				SaveWithMaterials(StreamOut &inStream, SharedSettingsToIDMap &ioSettingsMap, MaterialToIDMap &ioMaterialMap) const;
-
-	using SettingsResult = Result<Ref<SoftBodySharedSettings>>;
-
-	/// Restore a shape and materials. Pass in an empty map in ioSettingsMap / ioMaterialMap or reuse the same map while reading multiple settings objects from the same stream in order to restore duplicates.
-	static SettingsResult sRestoreWithMaterials(StreamIn &inStream, IDToSharedSettingsMap &ioSettingsMap, IDToMaterialMap &ioMaterialMap);
-
-	/// Create a cube. This can be used to create a simple soft body for testing purposes.
-	/// It will contain edge constraints, volume constraints and faces.
-	/// @param inGridSize Number of points along each axis
-	/// @param inGridSpacing Distance between points
-	static Ref<SoftBodySharedSettings> sCreateCube(uint inGridSize, float inGridSpacing);
-
-	/// A vertex is a particle, the data in this structure is only used during creation of the soft body and not during simulation
-	struct JPH_EXPORT Vertex
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, Vertex)
-
-		/// Constructor
-						Vertex() = default;
-		explicit		Vertex(const Float3 &inPosition, const Float3 &inVelocity = Float3(0, 0, 0), float inInvMass = 1.0f) : mPosition(inPosition), mVelocity(inVelocity), mInvMass(inInvMass) { }
-
-		Float3			mPosition { 0, 0, 0 };						///< Initial position of the vertex
-		Float3			mVelocity { 0, 0, 0 };						///< Initial velocity of the vertex
-		float			mInvMass = 1.0f;							///< Initial inverse of the mass of the vertex
-	};
-
-	/// A face defines the surface of the body
-	struct JPH_EXPORT Face
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, Face)
-
-		/// Constructor
-						Face() = default;
-						Face(uint32 inVertex1, uint32 inVertex2, uint32 inVertex3, uint32 inMaterialIndex = 0) : mVertex { inVertex1, inVertex2, inVertex3 }, mMaterialIndex(inMaterialIndex) { }
-
-		/// Check if this is a degenerate face (a face which points to the same vertex twice)
-		bool			IsDegenerate() const						{ return mVertex[0] == mVertex[1] || mVertex[0] == mVertex[2] || mVertex[1] == mVertex[2]; }
-
-		uint32			mVertex[3];									///< Indices of the vertices that form the face
-		uint32			mMaterialIndex = 0;							///< Index of the material of the face in SoftBodySharedSettings::mMaterials
-	};
-
-	/// An edge keeps two vertices at a constant distance using a spring: |x1 - x2| = rest length
-	struct JPH_EXPORT Edge
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, Edge)
-
-		/// Constructor
-						Edge() = default;
-						Edge(uint32 inVertex1, uint32 inVertex2, float inCompliance = 0.0f) : mVertex { inVertex1, inVertex2 }, mCompliance(inCompliance) { }
-
-		/// Return the lowest vertex index of this constraint
-		uint32			GetMinVertexIndex() const					{ return min(mVertex[0], mVertex[1]); }
-
-		uint32			mVertex[2];									///< Indices of the vertices that form the edge
-		float			mRestLength = 1.0f;							///< Rest length of the spring, calculated by CalculateEdgeLengths
-		float			mCompliance = 0.0f;							///< Inverse of the stiffness of the spring
-	};
-
-	/**
-	 * A dihedral bend constraint keeps the angle between two triangles constant along their shared edge.
-	 *
-	 *        x2
-	 *       /  \
-	 *      / t0 \
-	 *     x0----x1
-	 *      \ t1 /
-	 *       \  /
-	 *        x3
-	 *
-	 * x0..x3 are the vertices, t0 and t1 are the triangles that share the edge x0..x1
-	 *
-	 * Based on:
-	 * - "Position Based Dynamics" - Matthias Muller et al.
-	 * - "Strain Based Dynamics" - Matthias Muller et al.
-	 * - "Simulation of Clothing with Folds and Wrinkles" - R. Bridson et al.
-	 */
-	struct JPH_EXPORT DihedralBend
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, DihedralBend)
-
-		/// Constructor
-						DihedralBend() = default;
-						DihedralBend(uint32 inVertex1, uint32 inVertex2, uint32 inVertex3, uint32 inVertex4, float inCompliance = 0.0f) : mVertex { inVertex1, inVertex2, inVertex3, inVertex4 }, mCompliance(inCompliance) { }
-
-		/// Return the lowest vertex index of this constraint
-		uint32			GetMinVertexIndex() const					{ return min(min(mVertex[0], mVertex[1]), min(mVertex[2], mVertex[3])); }
-
-		uint32			mVertex[4];									///< Indices of the vertices of the 2 triangles that share an edge (the first 2 vertices are the shared edge)
-		float			mCompliance = 0.0f;							///< Inverse of the stiffness of the constraint
-		float			mInitialAngle = 0.0f;						///< Initial angle between the normals of the triangles (pi - dihedral angle), calculated by CalculateBendConstraintConstants
-	};
-
-	/// Volume constraint, keeps the volume of a tetrahedron constant
-	struct JPH_EXPORT Volume
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, Volume)
-
-		/// Constructor
-						Volume() = default;
-						Volume(uint32 inVertex1, uint32 inVertex2, uint32 inVertex3, uint32 inVertex4, float inCompliance = 0.0f) : mVertex { inVertex1, inVertex2, inVertex3, inVertex4 }, mCompliance(inCompliance) { }
-
-		/// Return the lowest vertex index of this constraint
-		uint32			GetMinVertexIndex() const					{ return min(min(mVertex[0], mVertex[1]), min(mVertex[2], mVertex[3])); }
-
-		uint32			mVertex[4];									///< Indices of the vertices that form the tetrahedron
-		float			mSixRestVolume = 1.0f;						///< 6 times the rest volume of the tetrahedron, calculated by CalculateVolumeConstraintVolumes
-		float			mCompliance = 0.0f;							///< Inverse of the stiffness of the constraint
-	};
-
-	/// An inverse bind matrix take a skinned vertex from its bind pose into joint local space
-	class JPH_EXPORT InvBind
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, InvBind)
-
-	public:
-		/// Constructor
-						InvBind() = default;
-						InvBind(uint32 inJointIndex, Mat44Arg inInvBind) : mJointIndex(inJointIndex), mInvBind(inInvBind) { }
-
-		uint32			mJointIndex = 0;							///< Joint index to which this is attached
-		Mat44			mInvBind = Mat44::sIdentity();				///< The inverse bind matrix, this takes a vertex in its bind pose (Vertex::mPosition) to joint local space
-	};
-
-	/// A joint and its skin weight
-	class JPH_EXPORT SkinWeight
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, SkinWeight)
-
-	public:
-		/// Constructor
-						SkinWeight() = default;
-						SkinWeight(uint32 inInvBindIndex, float inWeight) : mInvBindIndex(inInvBindIndex), mWeight(inWeight) { }
-
-		uint32			mInvBindIndex = 0;							///< Index in mInvBindMatrices
-		float			mWeight = 0.0f;								///< Weight with which it is skinned
-	};
-
-	/// A constraint that skins a vertex to joints and limits the distance that the simulated vertex can travel from this vertex
-	class JPH_EXPORT Skinned
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, Skinned)
-
-	public:
-		/// Constructor
-						Skinned() = default;
-						Skinned(uint32 inVertex, float inMaxDistance, float inBackStopDistance, float inBackStopRadius) : mVertex(inVertex), mMaxDistance(inMaxDistance), mBackStopDistance(inBackStopDistance), mBackStopRadius(inBackStopRadius) { }
-
-		/// Normalize the weights so that they add up to 1
-		void			NormalizeWeights()
-		{
-			// Get the total weight
-			float total = 0.0f;
-			for (const SkinWeight &w : mWeights)
-				total += w.mWeight;
-
-			// Normalize
-			if (total > 0.0f)
-				for (SkinWeight &w : mWeights)
-					w.mWeight /= total;
-		}
-
-		/// Maximum number of skin weights
-		static constexpr uint cMaxSkinWeights = 4;
-
-		uint32			mVertex = 0;								///< Index in mVertices which indicates which vertex is being skinned
-		SkinWeight		mWeights[cMaxSkinWeights];					///< Skin weights, the bind pose of the vertex is assumed to be stored in Vertex::mPosition. The first weight that is zero indicates the end of the list. Weights should add up to 1.
-		float			mMaxDistance = FLT_MAX;						///< Maximum distance that this vertex can reach from the skinned vertex, disabled when FLT_MAX. 0 when you want to hard skin the vertex to the skinned vertex.
-		float			mBackStopDistance = FLT_MAX;				///< Disabled if mBackStopDistance >= mMaxDistance. The faces surrounding mVertex determine an average normal. mBackStopDistance behind the vertex in the opposite direction of this normal, the back stop sphere starts. The simulated vertex will be pushed out of this sphere and it can be used to approximate the volume of the skinned mesh behind the skinned vertex.
-		float			mBackStopRadius = 40.0f;					///< Radius of the backstop sphere. By default this is a fairly large radius so the sphere approximates a plane.
-		uint32			mNormalInfo = 0;							///< Information needed to calculate the normal of this vertex, lowest 24 bit is start index in mSkinnedConstraintNormals, highest 8 bit is number of faces (generated by CalculateSkinnedConstraintNormals)
-	};
-
-	/// A long range attachment constraint, this is a constraint that sets a max distance between a kinematic vertex and a dynamic vertex
-	/// See: "Long Range Attachments - A Method to Simulate Inextensible Clothing in Computer Games", Tae-Yong Kim, Nuttapong Chentanez and Matthias Mueller-Fischer
-	class JPH_EXPORT LRA
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, LRA)
-
-	public:
-		/// Constructor
-						LRA() = default;
-						LRA(uint32 inVertex1, uint32 inVertex2, float inMaxDistance) : mVertex { inVertex1, inVertex2 }, mMaxDistance(inMaxDistance) { }
-
-		/// Return the lowest vertex index of this constraint
-		uint32			GetMinVertexIndex() const					{ return min(mVertex[0], mVertex[1]); }
-
-		uint32			mVertex[2];									///< The vertices that are connected. The first vertex should be kinematic, the 2nd dynamic.
-		float			mMaxDistance = 0.0f;						///< The maximum distance between the vertices, calculated by CalculateLRALengths
-	};
-
-	/// A discrete Cosserat rod connects two particles with a rigid rod that has fixed length and inertia.
-	/// A rod can be used instead of an Edge to constraint two vertices. The orientation of the rod can be
-	/// used to orient geometry attached to the rod (e.g. a plant leaf). Note that each rod needs to be constrained
-	/// by at least one RodBendTwist constraint in order to constrain the rotation of the rod. If you don't do
-	/// this then the orientation is likely to rotate around the rod axis with constant velocity.
-	/// Based on "Position and Orientation Based Cosserat Rods" - Kugelstadt and Schoemer - SIGGRAPH 2016
-	/// See: https://www.researchgate.net/publication/325597548_Position_and_Orientation_Based_Cosserat_Rods
-	struct JPH_EXPORT RodStretchShear
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, RodStretchShear)
-
-		/// Constructor
-						RodStretchShear() = default;
-						RodStretchShear(uint32 inVertex1, uint32 inVertex2, float inCompliance = 0.0f) : mVertex { inVertex1, inVertex2 }, mCompliance(inCompliance) { }
-
-		/// Return the lowest vertex index of this constraint
-		uint32			GetMinVertexIndex() const					{ return min(mVertex[0], mVertex[1]); }
-
-		uint32			mVertex[2];									///< Indices of the vertices that form the rod
-		float			mLength = 1.0f;								///< Fixed length of the rod, calculated by CalculateRodProperties
-		float			mInvMass = 1.0f;							///< Inverse of the mass of the rod (0 for static rods), calculated by CalculateRodProperties but can be overridden afterwards
-		float			mCompliance = 0.0f;							///< Inverse of the stiffness of the rod
-		Quat			mBishop	= Quat::sZero();					///< The Bishop frame of the rod (the rotation of the rod in its rest pose so that it has zero twist towards adjacent rods), calculated by CalculateRodProperties
-	};
-
-	/// A constraint that connects two Cosserat rods and limits bend and twist between the rods.
-	struct JPH_EXPORT RodBendTwist
-	{
-		JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, RodBendTwist)
-
-		/// Constructor
-						RodBendTwist() = default;
-						RodBendTwist(uint32 inRod1, uint32 inRod2, float inCompliance = 0.0f) : mRod { inRod1, inRod2 }, mCompliance(inCompliance) { }
-
-		uint32			mRod[2];									///< Indices of rods that are constrained (index in mRodStretchShearConstraints)
-		float			mCompliance = 0.0f;							///< Inverse of the stiffness of the rod
-		Quat			mOmega0 = Quat::sZero();					///< The initial rotation between the rods: rod1.mBishop.Conjugated() * rod2.mBishop, calculated by CalculateRodProperties
-	};
-
-	/// Add a face to this soft body
-	void				AddFace(const Face &inFace)					{ JPH_ASSERT(!inFace.IsDegenerate()); mFaces.push_back(inFace); }
-
-	Array<Vertex>		mVertices;									///< The list of vertices or particles of the body
-	Array<Face>			mFaces;										///< The list of faces of the body
-	Array<Edge>			mEdgeConstraints;							///< The list of edges or springs of the body
-	Array<DihedralBend>	mDihedralBendConstraints;					///< The list of dihedral bend constraints of the body
-	Array<Volume>		mVolumeConstraints;							///< The list of volume constraints of the body that keep the volume of tetrahedra in the soft body constant
-	Array<Skinned>		mSkinnedConstraints;						///< The list of vertices that are constrained to a skinned vertex
-	Array<InvBind>		mInvBindMatrices;							///< The list of inverse bind matrices for skinning vertices
-	Array<LRA>			mLRAConstraints;							///< The list of long range attachment constraints
-	Array<RodStretchShear>	mRodStretchShearConstraints;			///< The list of Cosserat rod constraints that connect two vertices and that limit stretch and shear
-	Array<RodBendTwist>	mRodBendTwistConstraints;					///< The list of Cosserat rod constraints that connect two rods and limit the bend and twist
-	PhysicsMaterialList mMaterials { PhysicsMaterial::sDefault };	///< The materials of the faces of the body, referenced by Face::mMaterialIndex
-
-private:
-	friend class SoftBodyMotionProperties;
-
-	/// Calculate the closest kinematic vertex array
-	void				CalculateClosestKinematic();
-
-	/// Tracks the closest kinematic vertex
-	struct ClosestKinematic
-	{
-		uint32			mVertex = 0xffffffff;						///< Vertex index of closest kinematic vertex
-		uint32			mHops = 0xffffffff;							///< Number of hops to the closest kinematic vertex
-		float			mDistance = FLT_MAX;						///< Distance to the closest kinematic vertex
-	};
-
-	/// Tracks the end indices of the various constraint groups
-	struct UpdateGroup
-	{
-		uint			mEdgeEndIndex;								///< The end index of the edge constraints in this group
-		uint			mLRAEndIndex;								///< The end index of the LRA constraints in this group
-		uint			mRodStretchShearEndIndex;					///< The end index of the rod stretch shear constraints in this group
-		uint			mRodBendTwistEndIndex;						///< The end index of the rod bend twist constraints in this group
-		uint			mDihedralBendEndIndex;						///< The end index of the dihedral bend constraints in this group
-		uint			mVolumeEndIndex;							///< The end index of the volume constraints in this group
-		uint			mSkinnedEndIndex;							///< The end index of the skinned constraints in this group
-	};
-
-	Array<ClosestKinematic> mClosestKinematic;						///< The closest kinematic vertex to each vertex in mVertices
-	Array<UpdateGroup>	mUpdateGroups;								///< The end indices for each group of constraints that can be updated in parallel
-	Array<uint32>		mSkinnedConstraintNormals;					///< A list of indices in the mFaces array used by mSkinnedConstraints, calculated by CalculateSkinnedConstraintNormals
-};
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/SoftBody/SoftBodyUpdateContext.h

@@ -1,63 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2023 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Core/NonCopyable.h>
-#include <Jolt/Physics/Body/MotionProperties.h>
-
-JPH_NAMESPACE_BEGIN
-
-class Body;
-class SoftBodyMotionProperties;
-class SoftBodyContactListener;
-class SimShapeFilter;
-
-/// @cond INTERNAL
-/// Temporary data used by the update of a soft body
-///
-/// WARNING: This class is an internal part of PhysicsSystem, it has no functions that can be called by users of the library.
-class SoftBodyUpdateContext : public NonCopyable
-{
-public:
-	static constexpr uint				cVertexCollisionBatch = 64;					///< Number of vertices to process in a batch in DetermineCollisionPlanes
-	static constexpr uint				cVertexConstraintBatch = 256;				///< Number of vertices to group for processing batches of constraints in ApplyEdgeConstraints
-
-	// Input
-	Body *								mBody;										///< Body that is being updated
-	SoftBodyMotionProperties *			mMotionProperties;							///< Motion properties of that body
-	SoftBodyContactListener *			mContactListener;							///< Contact listener to fire callbacks to
-	const SimShapeFilter *				mSimShapeFilter;							///< Shape filter to use for collision detection
-	RMat44								mCenterOfMassTransform;						///< Transform of the body relative to the soft body
-	Vec3								mGravity;									///< Gravity vector in local space of the soft body
-	Vec3								mDisplacementDueToGravity;					///< Displacement of the center of mass due to gravity in the current time step
-	float								mDeltaTime;									///< Delta time for the current time step
-	float								mSubStepDeltaTime;							///< Delta time for each sub step
-
-	/// Describes progress in the current update
-	enum class EState
-	{
-		DetermineCollisionPlanes,													///< Determine collision planes for vertices in parallel
-		DetermineSensorCollisions,													///< Determine collisions with sensors in parallel
-		ApplyConstraints,															///< Apply constraints in parallel
-		Done																		///< Update is finished
-	};
-
-	// State of the update
-	atomic<EState>						mState { EState::DetermineCollisionPlanes };///< Current state of the update
-	atomic<uint>						mNextCollisionVertex { 0 };					///< Next vertex to process for DetermineCollisionPlanes
-	atomic<uint>						mNumCollisionVerticesProcessed { 0 };		///< Number of vertices processed by DetermineCollisionPlanes, used to determine if we can go to the next step
-	atomic<uint>						mNextSensorIndex { 0 };						///< Next sensor to process for DetermineCollisionPlanes
-	atomic<uint>						mNumSensorsProcessed { 0 };					///< Number of sensors processed by DetermineSensorCollisions, used to determine if we can go to the next step
-	atomic<uint>						mNextIteration { 0 };						///< Next simulation iteration to process
-	atomic<uint>						mNextConstraintGroup { 0 };					///< Next constraint group to process
-	atomic<uint>						mNumConstraintGroupsProcessed { 0 };		///< Number of groups processed, used to determine if we can go to the next iteration
-
-	// Output
-	Vec3								mDeltaPosition;								///< Delta position of the body in the current time step, should be applied after the update
-	ECanSleep							mCanSleep;									///< Can the body sleep? Should be applied after the update
-};
-/// @endcond
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/SoftBody/SoftBodyVertex.h

@@ -1,36 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2023 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Geometry/Plane.h>
-
-JPH_NAMESPACE_BEGIN
-
-/// Run time information for a single particle of a soft body
-/// Note that at run-time you should only modify the inverse mass and/or velocity of a vertex to control the soft body.
-/// Modifying the position can lead to missed collisions.
-/// The other members are used internally by the soft body solver.
-class SoftBodyVertex
-{
-public:
-	/// Reset collision information to prepare for a new collision check
-	inline void		ResetCollision()
-	{
-		mLargestPenetration = -FLT_MAX;
-		mCollidingShapeIndex = -1;
-		mHasContact = false;
-	}
-
-	Vec3			mPreviousPosition;					///< Internal use only. Position at the previous time step
-	Vec3			mPosition;							///< Position, relative to the center of mass of the soft body
-	Vec3			mVelocity;							///< Velocity, relative to the center of mass of the soft body
-	Plane			mCollisionPlane;					///< Internal use only. Nearest collision plane, relative to the center of mass of the soft body
-	int				mCollidingShapeIndex;				///< Internal use only. Index in the colliding shapes list of the body we may collide with
-	bool			mHasContact;						///< True if the vertex has collided with anything in the last update
-	float			mLargestPenetration;				///< Internal use only. Used while finding the collision plane, stores the largest penetration found so far
-	float			mInvMass;							///< Inverse mass (1 / mass)
-};
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/StateRecorder.h

@@ -1,136 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Core/StreamIn.h>
-#include <Jolt/Core/StreamOut.h>
-
-JPH_NAMESPACE_BEGIN
-
-class Body;
-class Constraint;
-class BodyID;
-
-JPH_SUPPRESS_WARNING_PUSH
-JPH_GCC_SUPPRESS_WARNING("-Wshadow") // GCC complains about the 'Constraints' value conflicting with the 'Constraints' typedef
-
-/// A bit field that determines which aspects of the simulation to save
-enum class EStateRecorderState : uint8
-{
-	None				= 0,														///< Save nothing
-	Global				= 1,														///< Save global physics system state (delta time, gravity, etc.)
-	Bodies				= 2,														///< Save the state of bodies
-	Contacts			= 4,														///< Save the state of contacts
-	Constraints			= 8,														///< Save the state of constraints
-	All					= Global | Bodies | Contacts | Constraints					///< Save all state
-};
-
-JPH_SUPPRESS_WARNING_POP
-
-/// Bitwise OR operator for EStateRecorderState
-constexpr EStateRecorderState operator | (EStateRecorderState inLHS, EStateRecorderState inRHS)
-{
-	return EStateRecorderState(uint8(inLHS) | uint8(inRHS));
-}
-
-/// Bitwise AND operator for EStateRecorderState
-constexpr EStateRecorderState operator & (EStateRecorderState inLHS, EStateRecorderState inRHS)
-{
-	return EStateRecorderState(uint8(inLHS) & uint8(inRHS));
-}
-
-/// Bitwise XOR operator for EStateRecorderState
-constexpr EStateRecorderState operator ^ (EStateRecorderState inLHS, EStateRecorderState inRHS)
-{
-	return EStateRecorderState(uint8(inLHS) ^ uint8(inRHS));
-}
-
-/// Bitwise NOT operator for EStateRecorderState
-constexpr EStateRecorderState operator ~ (EStateRecorderState inAllowedDOFs)
-{
-	return EStateRecorderState(~uint8(inAllowedDOFs));
-}
-
-/// Bitwise OR assignment operator for EStateRecorderState
-constexpr EStateRecorderState & operator |= (EStateRecorderState &ioLHS, EStateRecorderState inRHS)
-{
-	ioLHS = ioLHS | inRHS;
-	return ioLHS;
-}
-
-/// Bitwise AND assignment operator for EStateRecorderState
-constexpr EStateRecorderState & operator &= (EStateRecorderState &ioLHS, EStateRecorderState inRHS)
-{
-	ioLHS = ioLHS & inRHS;
-	return ioLHS;
-}
-
-/// Bitwise XOR assignment operator for EStateRecorderState
-constexpr EStateRecorderState & operator ^= (EStateRecorderState &ioLHS, EStateRecorderState inRHS)
-{
-	ioLHS = ioLHS ^ inRHS;
-	return ioLHS;
-}
-
-/// User callbacks that allow determining which parts of the simulation should be saved by a StateRecorder
-class JPH_EXPORT StateRecorderFilter
-{
-public:
-	/// Destructor
-	virtual				~StateRecorderFilter() = default;
-
-	///@name Functions called during SaveState
-	///@{
-
-	/// If the state of a specific body should be saved
-	virtual bool		ShouldSaveBody([[maybe_unused]] const Body &inBody) const					{ return true; }
-
-	/// If the state of a specific constraint should be saved
-	virtual bool		ShouldSaveConstraint([[maybe_unused]] const Constraint &inConstraint) const	{ return true; }
-
-	/// If the state of a specific contact should be saved
-	virtual bool		ShouldSaveContact([[maybe_unused]] const BodyID &inBody1, [[maybe_unused]] const BodyID &inBody2) const { return true; }
-
-	///@}
-	///@name Functions called during RestoreState
-	///@{
-
-	/// If the state of a specific contact should be restored
-	virtual bool		ShouldRestoreContact([[maybe_unused]] const BodyID &inBody1, [[maybe_unused]] const BodyID &inBody2) const { return true; }
-
-	///@}
-};
-
-/// Class that records the state of a physics system. Can be used to check if the simulation is deterministic by putting the recorder in validation mode.
-/// Can be used to restore the state to an earlier point in time. Note that only the state that is modified by the simulation is saved, configuration settings
-/// like body friction or restitution, motion quality etc. are not saved and need to be saved by the user if desired.
-class JPH_EXPORT StateRecorder : public StreamIn, public StreamOut
-{
-public:
-	/// Constructor
-						StateRecorder() = default;
-						StateRecorder(const StateRecorder &inRHS)					: mIsValidating(inRHS.mIsValidating) { }
-
-	/// Sets the stream in validation mode. In this case the physics system ensures that before it calls ReadBytes that it will
-	/// ensure that those bytes contain the current state. This makes it possible to step and save the state, restore to the previous
-	/// step and step again and when the recorded state is not the same it can restore the expected state and any byte that changes
-	/// due to a ReadBytes function can be caught to find out which part of the simulation is not deterministic.
-	/// Note that validation only works when saving the full state of the simulation (EStateRecorderState::All, StateRecorderFilter == nullptr).
-	void				SetValidating(bool inValidating)							{ mIsValidating = inValidating; }
-	bool				IsValidating() const										{ return mIsValidating; }
-
-	/// This allows splitting the state in multiple parts. While restoring, only the last part should have this flag set to true.
-	/// Note that you should ensure that the different parts contain information for disjoint sets of bodies, constraints and contacts.
-	/// E.g. if you restore the same contact twice, you get undefined behavior. In order to create disjoint sets you can use the StateRecorderFilter.
-	/// Note that validation is not compatible with restoring a simulation state in multiple parts.
-	void				SetIsLastPart(bool inIsLastPart)							{ mIsLastPart = inIsLastPart; }
-	bool				IsLastPart() const											{ return mIsLastPart; }
-
-private:
-	bool				mIsValidating = false;
-	bool				mIsLastPart = true;
-};
-
-JPH_NAMESPACE_END