@bloomengine/engine 0.4.0 → 0.4.1

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/VehicleConstraint.h

@@ -1,252 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Physics/Constraints/Constraint.h>
-#include <Jolt/Physics/PhysicsStepListener.h>
-#include <Jolt/Physics/Constraints/ConstraintPart/AngleConstraintPart.h>
-#include <Jolt/Physics/Vehicle/VehicleCollisionTester.h>
-#include <Jolt/Physics/Vehicle/VehicleAntiRollBar.h>
-#include <Jolt/Physics/Vehicle/Wheel.h>
-#include <Jolt/Physics/Vehicle/VehicleController.h>
-
-JPH_NAMESPACE_BEGIN
-
-class PhysicsSystem;
-
-/// Configuration for constraint that simulates a wheeled vehicle.
-///
-/// The properties in this constraint are largely based on "Car Physics for Games" by Marco Monster.
-/// See: https://www.asawicki.info/Mirror/Car%20Physics%20for%20Games/Car%20Physics%20for%20Games.html
-class JPH_EXPORT VehicleConstraintSettings : public ConstraintSettings
-{
-	JPH_DECLARE_SERIALIZABLE_VIRTUAL(JPH_EXPORT, VehicleConstraintSettings)
-
-public:
-	/// Saves the contents of the constraint settings in binary form to inStream.
-	virtual void				SaveBinaryState(StreamOut &inStream) const override;
-
-	Vec3						mUp { 0, 1, 0 };							///< Vector indicating the up direction of the vehicle (in local space to the body)
-	Vec3						mForward { 0, 0, 1 };						///< Vector indicating forward direction of the vehicle (in local space to the body)
-	float						mMaxPitchRollAngle = JPH_PI;				///< Defines the maximum pitch/roll angle (rad), can be used to avoid the car from getting upside down. The vehicle up direction will stay within a cone centered around the up axis with half top angle mMaxPitchRollAngle, set to pi to turn off.
-	Array<Ref<WheelSettings>>	mWheels;									///< List of wheels and their properties
-	VehicleAntiRollBars			mAntiRollBars;								///< List of anti rollbars and their properties
-	Ref<VehicleControllerSettings> mController;								///< Defines how the vehicle can accelerate / decelerate
-
-protected:
-	/// This function should not be called directly, it is used by sRestoreFromBinaryState.
-	virtual void				RestoreBinaryState(StreamIn &inStream) override;
-};
-
-/// Constraint that simulates a vehicle
-/// Note: Don't forget to register the constraint as a StepListener with the PhysicsSystem!
-///
-/// When the vehicle drives over very light objects (rubble) you may see the car body dip down. This is a known issue and is an artifact of the iterative solver that Jolt is using.
-/// Basically if a light object is sandwiched between two heavy objects (the static floor and the car body), the light object is not able to transfer enough force from the ground to
-/// the car body to keep the car body up. You can see this effect in the HeavyOnLightTest sample, the boxes on the right have a lot of penetration because they're on top of light objects.
-///
-/// There are a couple of ways to improve this:
-///
-/// 1. You can increase the number of velocity steps (global settings PhysicsSettings::mNumVelocitySteps or if you only want to increase it on
-/// the vehicle you can use VehicleConstraintSettings::mNumVelocityStepsOverride). E.g. going from 10 to 30 steps in the HeavyOnLightTest sample makes the penetration a lot less.
-/// The number of position steps can also be increased (the first prevents the body from going down, the second corrects it if the problem did
-/// occur which inevitably happens due to numerical drift). This solution costs CPU cycles.
-///
-/// 2. You can reduce the mass difference between the vehicle body and the rubble on the floor (by making the rubble heavier or the car lighter).
-///
-/// 3. You could filter out collisions between the vehicle collision test and the rubble completely. This would make the wheels ignore the rubble but would cause the vehicle to drive
-/// through it as if nothing happened. You could create fake wheels (keyframed bodies) that move along with the vehicle and that only collide with rubble (and not the vehicle or the ground).
-/// This would cause the vehicle to push away the rubble without the rubble being able to affect the vehicle (unless it hits the main body of course).
-///
-/// Note that when driving over rubble, you may see the wheel jump up and down quite quickly because one frame a collision is found and the next frame not.
-/// To alleviate this, it may be needed to smooth the motion of the visual mesh for the wheel.
-class JPH_EXPORT VehicleConstraint : public Constraint, public PhysicsStepListener
-{
-public:
-	/// Constructor / destructor
-								VehicleConstraint(Body &inVehicleBody, const VehicleConstraintSettings &inSettings);
-	virtual						~VehicleConstraint() override;
-
-	/// Get the type of a constraint
-	virtual EConstraintSubType	GetSubType() const override					{ return EConstraintSubType::Vehicle; }
-
-	/// Defines the maximum pitch/roll angle (rad), can be used to avoid the car from getting upside down. The vehicle up direction will stay within a cone centered around the up axis with half top angle mMaxPitchRollAngle, set to pi to turn off.
-	void						SetMaxPitchRollAngle(float inMaxPitchRollAngle) { mCosMaxPitchRollAngle = Cos(inMaxPitchRollAngle); }
-	float						GetMaxPitchRollAngle() const				{ return ACos(mCosMaxPitchRollAngle); }
-
-	/// Set the interface that tests collision between wheel and ground
-	void						SetVehicleCollisionTester(const VehicleCollisionTester *inTester) { mVehicleCollisionTester = inTester; }
-	const VehicleCollisionTester *GetVehicleCollisionTester() const			{ return mVehicleCollisionTester; }
-
-	/// Callback function to combine the friction of a tire with the friction of the body it is colliding with.
-	/// On input ioLongitudinalFriction and ioLateralFriction contain the friction of the tire, on output they should contain the combined friction with inBody2.
-	using CombineFunction = function<void(uint inWheelIndex, float &ioLongitudinalFriction, float &ioLateralFriction, const Body &inBody2, const SubShapeID &inSubShapeID2)>;
-
-	/// Set the function that combines the friction of two bodies and returns it
-	/// Default method is the geometric mean: sqrt(friction1 * friction2).
-	void						SetCombineFriction(const CombineFunction &inCombineFriction) { mCombineFriction = inCombineFriction; }
-	const CombineFunction &		GetCombineFriction() const					{ return mCombineFriction; }
-
-	/// Callback function to notify of current stage in PhysicsStepListener::OnStep.
-	using StepCallback = function<void(VehicleConstraint &inVehicle, const PhysicsStepListenerContext &inContext)>;
-
-	/// Callback function to notify that PhysicsStepListener::OnStep has started for this vehicle. Default is to do nothing.
-	/// Can be used to allow higher-level code to e.g. control steering. This is the last moment that the position/orientation of the vehicle can be changed.
-	/// Wheel collision checks have not been performed yet.
-	const StepCallback &		GetPreStepCallback() const					{ return mPreStepCallback; }
-	void						SetPreStepCallback(const StepCallback &inPreStepCallback) { mPreStepCallback = inPreStepCallback; }
-
-	/// Callback function to notify that PhysicsStepListener::OnStep has just completed wheel collision checks. Default is to do nothing.
-	/// Can be used to allow higher-level code to e.g. detect tire contact or to modify the velocity of the vehicle based on the wheel contacts.
-	/// You should not change the position of the vehicle in this callback as the wheel collision checks have already been performed.
-	const StepCallback &		GetPostCollideCallback() const				{ return mPostCollideCallback; }
-	void						SetPostCollideCallback(const StepCallback &inPostCollideCallback) { mPostCollideCallback = inPostCollideCallback; }
-
-	/// Callback function to notify that PhysicsStepListener::OnStep has completed for this vehicle. Default is to do nothing.
-	/// Can be used to allow higher-level code to e.g. control the vehicle in the air.
-	/// You should not change the position of the vehicle in this callback as the wheel collision checks have already been performed.
-	const StepCallback &		GetPostStepCallback() const					{ return mPostStepCallback; }
-	void						SetPostStepCallback(const StepCallback &inPostStepCallback) { mPostStepCallback = inPostStepCallback; }
-
-	/// Override gravity for this vehicle. Note that overriding gravity will set the gravity factor of the vehicle body to 0 and apply gravity in the PhysicsStepListener instead.
-	void						OverrideGravity(Vec3Arg inGravity)			{ mGravityOverride = inGravity; mIsGravityOverridden = true; }
-	bool						IsGravityOverridden() const					{ return mIsGravityOverridden; }
-	Vec3						GetGravityOverride() const					{ return mGravityOverride; }
-	void						ResetGravityOverride()						{ mIsGravityOverridden = false; mBody->GetMotionProperties()->SetGravityFactor(1.0f); } ///< Note that resetting the gravity override will restore the gravity factor of the vehicle body to 1.
-
-	/// Get the local space forward vector of the vehicle
-	Vec3						GetLocalForward() const						{ return mForward; }
-
-	/// Get the local space up vector of the vehicle
-	Vec3						GetLocalUp() const							{ return mUp; }
-
-	/// Vector indicating the world space up direction (used to limit vehicle pitch/roll), calculated every frame by inverting gravity
-	Vec3						GetWorldUp() const							{ return mWorldUp; }
-
-	/// Access to the vehicle body
-	Body *						GetVehicleBody() const						{ return mBody; }
-
-	/// Access to the vehicle controller interface (determines acceleration / deceleration)
-	const VehicleController *	GetController() const						{ return mController; }
-
-	/// Access to the vehicle controller interface (determines acceleration / deceleration)
-	VehicleController *			GetController()								{ return mController; }
-
-	/// Get the state of the wheels
-	const Wheels &				GetWheels() const							{ return mWheels; }
-
-	/// Get the state of a wheels (writable interface, allows you to make changes to the configuration which will take effect the next time step)
-	Wheels &					GetWheels()									{ return mWheels; }
-
-	/// Get the state of a wheel
-	Wheel *						GetWheel(uint inIdx)						{ return mWheels[inIdx]; }
-	const Wheel *				GetWheel(uint inIdx) const					{ return mWheels[inIdx]; }
-
-	/// Get the basis vectors for the wheel in local space to the vehicle body (note: basis does not rotate when the wheel rotates around its axis)
-	/// @param inWheel Wheel to fetch basis for
-	/// @param outForward Forward vector for the wheel
-	/// @param outUp Up vector for the wheel
-	/// @param outRight Right vector for the wheel
-	void						GetWheelLocalBasis(const Wheel *inWheel, Vec3 &outForward, Vec3 &outUp, Vec3 &outRight) const;
-
-	/// Get the transform of a wheel in local space to the vehicle body, returns a matrix that transforms a cylinder aligned with the Y axis in body space (not COM space)
-	/// @param inWheelIndex Index of the wheel to fetch
-	/// @param inWheelRight Unit vector that indicates right in model space of the wheel (so if you only have 1 wheel model, you probably want to specify the opposite direction for the left and right wheels)
-	/// @param inWheelUp Unit vector that indicates up in model space of the wheel
-	Mat44						GetWheelLocalTransform(uint inWheelIndex, Vec3Arg inWheelRight, Vec3Arg inWheelUp) const;
-
-	/// Get the transform of a wheel in world space, returns a matrix that transforms a cylinder aligned with the Y axis in world space
-	/// @param inWheelIndex Index of the wheel to fetch
-	/// @param inWheelRight Unit vector that indicates right in model space of the wheel (so if you only have 1 wheel model, you probably want to specify the opposite direction for the left and right wheels)
-	/// @param inWheelUp Unit vector that indicates up in model space of the wheel
-	RMat44						GetWheelWorldTransform(uint inWheelIndex, Vec3Arg inWheelRight, Vec3Arg inWheelUp) const;
-
-	/// Access to the vehicle's anti roll bars
-	const VehicleAntiRollBars &	GetAntiRollBars() const						{ return mAntiRollBars; }
-	VehicleAntiRollBars &		GetAntiRollBars()							{ return mAntiRollBars; }
-
-	/// Number of simulation steps between wheel collision tests when the vehicle is active. Default is 1. 0 = never, 1 = every step, 2 = every other step, etc.
-	/// Note that if a vehicle has multiple wheels and the number of steps > 1, the wheels will be tested in a round robin fashion.
-	/// If there are multiple vehicles, the tests will be spread out based on the BodyID of the vehicle.
-	/// If you set this to test less than every step, you may see simulation artifacts. This setting can be used to reduce the cost of simulating vehicles in the distance.
-	void						SetNumStepsBetweenCollisionTestActive(uint inSteps) { mNumStepsBetweenCollisionTestActive = inSteps; }
-	uint						GetNumStepsBetweenCollisionTestActive() const { return mNumStepsBetweenCollisionTestActive; }
-
-	/// Number of simulation steps between wheel collision tests when the vehicle is inactive. Default is 1. 0 = never, 1 = every step, 2 = every other step, etc.
-	/// Note that if a vehicle has multiple wheels and the number of steps > 1, the wheels will be tested in a round robin fashion.
-	/// If there are multiple vehicles, the tests will be spread out based on the BodyID of the vehicle.
-	/// This number can be lower than the number of steps when the vehicle is active as the only purpose of this test is
-	/// to allow the vehicle to wake up in response to bodies moving into the wheels but not touching the body of the vehicle.
-	void						SetNumStepsBetweenCollisionTestInactive(uint inSteps) { mNumStepsBetweenCollisionTestInactive = inSteps; }
-	uint						GetNumStepsBetweenCollisionTestInactive() const { return mNumStepsBetweenCollisionTestInactive; }
-
-	// Generic interface of a constraint
-	virtual bool				IsActive() const override					{ return mIsActive && Constraint::IsActive(); }
-	virtual void				NotifyShapeChanged(const BodyID &inBodyID, Vec3Arg inDeltaCOM) override { /* Do nothing */ }
-	virtual void				SetupVelocityConstraint(float inDeltaTime) override;
-	virtual void				ResetWarmStart() override;
-	virtual void				WarmStartVelocityConstraint(float inWarmStartImpulseRatio) override;
-	virtual bool				SolveVelocityConstraint(float inDeltaTime) override;
-	virtual bool				SolvePositionConstraint(float inDeltaTime, float inBaumgarte) override;
-	virtual void				BuildIslands(uint32 inConstraintIndex, IslandBuilder &ioBuilder, BodyManager &inBodyManager) override;
-	virtual uint				BuildIslandSplits(LargeIslandSplitter &ioSplitter) const override;
-#ifdef JPH_DEBUG_RENDERER
-	virtual void				DrawConstraint(DebugRenderer *inRenderer) const override;
-	virtual void				DrawConstraintLimits(DebugRenderer *inRenderer) const override;
-#endif // JPH_DEBUG_RENDERER
-	virtual void				SaveState(StateRecorder &inStream) const override;
-	virtual void				RestoreState(StateRecorder &inStream) override;
-	virtual Ref<ConstraintSettings> GetConstraintSettings() const override;
-
-private:
-	// See: PhysicsStepListener
-	virtual void				OnStep(const PhysicsStepListenerContext &inContext) override;
-
-	// Calculate the position where the suspension and traction forces should be applied in world space, relative to the center of mass of both bodies
-	void						CalculateSuspensionForcePoint(const Wheel &inWheel, Vec3 &outR1PlusU, Vec3 &outR2) const;
-
-	// Calculate the constraint properties for mPitchRollPart
-	void						CalculatePitchRollConstraintProperties(RMat44Arg inBodyTransform);
-
-	// Gravity override
-	bool						mIsGravityOverridden = false;				///< If the gravity is currently overridden
-	Vec3						mGravityOverride = Vec3::sZero();			///< Gravity override value, replaces PhysicsSystem::GetGravity() when mIsGravityOverridden is true
-
-	// Simulation information
-	Body *						mBody;										///< Body of the vehicle
-	Vec3						mForward;									///< Local space forward vector for the vehicle
-	Vec3						mUp;										///< Local space up vector for the vehicle
-	Vec3						mWorldUp;									///< Vector indicating the world space up direction (used to limit vehicle pitch/roll)
-	Wheels						mWheels;									///< Wheel states of the vehicle
-	VehicleAntiRollBars			mAntiRollBars;								///< Anti rollbars of the vehicle
-	VehicleController *			mController;								///< Controls the acceleration / deceleration of the vehicle
-	bool						mIsActive = false;							///< If this constraint is active
-	uint						mNumStepsBetweenCollisionTestActive = 1;	///< Number of simulation steps between wheel collision tests when the vehicle is active
-	uint						mNumStepsBetweenCollisionTestInactive = 1;	///< Number of simulation steps between wheel collision tests when the vehicle is inactive
-	uint						mCurrentStep = 0;							///< Current step number, used to determine when to test a wheel
-
-	// Prevent vehicle from toppling over
-	float						mCosMaxPitchRollAngle;						///< Cos of the max pitch/roll angle
-	float						mCosPitchRollAngle;							///< Cos of the current pitch/roll angle
-	Vec3						mPitchRollRotationAxis { 0, 1, 0 };			///< Current axis along which to apply torque to prevent the car from toppling over
-	AngleConstraintPart			mPitchRollPart;								///< Constraint part that prevents the car from toppling over
-
-	// Interfaces
-	RefConst<VehicleCollisionTester> mVehicleCollisionTester;				///< Class that performs testing of collision for the wheels
-	CombineFunction				mCombineFriction = [](uint, float &ioLongitudinalFriction, float &ioLateralFriction, const Body &inBody2, const SubShapeID &)
-	{
-		float body_friction = inBody2.GetFriction();
-
-		ioLongitudinalFriction = sqrt(ioLongitudinalFriction * body_friction);
-		ioLateralFriction = sqrt(ioLateralFriction * body_friction);
-	};
-
-	// Callbacks
-	StepCallback				mPreStepCallback;
-	StepCallback				mPostCollideCallback;
-	StepCallback				mPostStepCallback;
-};
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/VehicleController.cpp

@@ -1,17 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#include <Jolt/Jolt.h>
-
-#include <Jolt/Physics/Vehicle/VehicleController.h>
-#include <Jolt/ObjectStream/TypeDeclarations.h>
-
-JPH_NAMESPACE_BEGIN
-
-JPH_IMPLEMENT_SERIALIZABLE_ABSTRACT(VehicleControllerSettings)
-{
-	JPH_ADD_BASE_CLASS(VehicleControllerSettings, SerializableObject)
-}
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/VehicleController.h

@@ -1,87 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/ObjectStream/SerializableObject.h>
-#include <Jolt/Core/StreamIn.h>
-#include <Jolt/Core/StreamOut.h>
-#ifdef JPH_DEBUG_RENDERER
-	#include <Jolt/Renderer/DebugRenderer.h>
-#endif // JPH_DEBUG_RENDERER
-
-JPH_NAMESPACE_BEGIN
-
-class PhysicsSystem;
-class VehicleController;
-class VehicleConstraint;
-class WheelSettings;
-class Wheel;
-class StateRecorder;
-
-/// Basic settings object for interface that controls acceleration / deceleration of the vehicle
-class JPH_EXPORT VehicleControllerSettings : public SerializableObject, public RefTarget<VehicleControllerSettings>
-{
-	JPH_DECLARE_SERIALIZABLE_ABSTRACT(JPH_EXPORT, VehicleControllerSettings)
-
-public:
-	/// Saves the contents of the controller settings in binary form to inStream.
-	virtual void				SaveBinaryState(StreamOut &inStream) const = 0;
-
-	/// Restore the contents of the controller settings in binary form from inStream.
-	virtual void				RestoreBinaryState(StreamIn &inStream) = 0;
-
-	/// Create an instance of the vehicle controller class
-	virtual VehicleController *	ConstructController(VehicleConstraint &inConstraint) const = 0;
-};
-
-/// Runtime data for interface that controls acceleration / deceleration of the vehicle
-class JPH_EXPORT VehicleController : public NonCopyable
-{
-public:
-	JPH_OVERRIDE_NEW_DELETE
-
-	/// Constructor / destructor
-	explicit					VehicleController(VehicleConstraint &inConstraint) : mConstraint(inConstraint) { }
-	virtual						~VehicleController() = default;
-
-	/// Access the vehicle constraint that this controller is part of
-	VehicleConstraint &			GetConstraint()								{ return mConstraint; }
-	const VehicleConstraint &	GetConstraint() const						{ return mConstraint; }
-
-	/// Recreate the settings for this controller
-	virtual Ref<VehicleControllerSettings> GetSettings() const = 0;
-
-protected:
-	// The functions below are only for the VehicleConstraint
-	friend class VehicleConstraint;
-
-	// Create a new instance of wheel
-	virtual Wheel *				ConstructWheel(const WheelSettings &inWheel) const = 0;
-
-	// If the vehicle is allowed to go to sleep
-	virtual bool				AllowSleep() const = 0;
-
-	// Called before the wheel probes have been done
-	virtual void				PreCollide(float inDeltaTime, PhysicsSystem &inPhysicsSystem) = 0;
-
-	// Called after the wheel probes have been done
-	virtual void				PostCollide(float inDeltaTime, PhysicsSystem &inPhysicsSystem) = 0;
-
-	// Solve longitudinal and lateral constraint parts for all of the wheels
-	virtual bool				SolveLongitudinalAndLateralConstraints(float inDeltaTime) = 0;
-
-	// Saving state for replay
-	virtual void				SaveState(StateRecorder &inStream) const = 0;
-	virtual void				RestoreState(StateRecorder &inStream) = 0;
-
-#ifdef JPH_DEBUG_RENDERER
-	// Drawing interface
-	virtual void				Draw(DebugRenderer *inRenderer) const = 0;
-#endif // JPH_DEBUG_RENDERER
-
-	VehicleConstraint &			mConstraint;								///< The vehicle constraint we belong to
-};
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/VehicleDifferential.cpp

@@ -1,81 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#include <Jolt/Jolt.h>
-
-#include <Jolt/Physics/Vehicle/VehicleDifferential.h>
-#include <Jolt/ObjectStream/TypeDeclarations.h>
-
-JPH_NAMESPACE_BEGIN
-
-JPH_IMPLEMENT_SERIALIZABLE_NON_VIRTUAL(VehicleDifferentialSettings)
-{
-	JPH_ADD_ATTRIBUTE(VehicleDifferentialSettings, mLeftWheel)
-	JPH_ADD_ATTRIBUTE(VehicleDifferentialSettings, mRightWheel)
-	JPH_ADD_ATTRIBUTE(VehicleDifferentialSettings, mDifferentialRatio)
-	JPH_ADD_ATTRIBUTE(VehicleDifferentialSettings, mLeftRightSplit)
-	JPH_ADD_ATTRIBUTE(VehicleDifferentialSettings, mLimitedSlipRatio)
-	JPH_ADD_ATTRIBUTE(VehicleDifferentialSettings, mEngineTorqueRatio)
-}
-
-void VehicleDifferentialSettings::SaveBinaryState(StreamOut &inStream) const
-{
-	inStream.Write(mLeftWheel);
-	inStream.Write(mRightWheel);
-	inStream.Write(mDifferentialRatio);
-	inStream.Write(mLeftRightSplit);
-	inStream.Write(mLimitedSlipRatio);
-	inStream.Write(mEngineTorqueRatio);
-}
-
-void VehicleDifferentialSettings::RestoreBinaryState(StreamIn &inStream)
-{
-	inStream.Read(mLeftWheel);
-	inStream.Read(mRightWheel);
-	inStream.Read(mDifferentialRatio);
-	inStream.Read(mLeftRightSplit);
-	inStream.Read(mLimitedSlipRatio);
-	inStream.Read(mEngineTorqueRatio);
-}
-
-void VehicleDifferentialSettings::CalculateTorqueRatio(float inLeftAngularVelocity, float inRightAngularVelocity, float &outLeftTorqueFraction, float &outRightTorqueFraction) const
-{
-	// Start with the default torque ratio
-	outLeftTorqueFraction = 1.0f - mLeftRightSplit;
-	outRightTorqueFraction = mLeftRightSplit;
-
-	if (mLimitedSlipRatio < FLT_MAX)
-	{
-		JPH_ASSERT(mLimitedSlipRatio > 1.0f);
-
-		// This is a limited slip differential, adjust torque ratios according to wheel speeds
-		float omega_l = max(1.0e-3f, abs(inLeftAngularVelocity)); // prevent div by zero by setting a minimum velocity and ignoring that the wheels may be rotating in different directions
-		float omega_r = max(1.0e-3f, abs(inRightAngularVelocity));
-		float omega_min = min(omega_l, omega_r);
-		float omega_max = max(omega_l, omega_r);
-
-		// Map into a value that is 0 when the wheels are turning at an equal rate and 1 when the wheels are turning at mLimitedSlipRotationRatio
-		float alpha = min((omega_max / omega_min - 1.0f) / (mLimitedSlipRatio - 1.0f), 1.0f);
-		JPH_ASSERT(alpha >= 0.0f);
-		float one_min_alpha = 1.0f - alpha;
-
-		if (omega_l < omega_r)
-		{
-			// Redirect more power to the left wheel
-			outLeftTorqueFraction = outLeftTorqueFraction * one_min_alpha + alpha;
-			outRightTorqueFraction = outRightTorqueFraction * one_min_alpha;
-		}
-		else
-		{
-			// Redirect more power to the right wheel
-			outLeftTorqueFraction = outLeftTorqueFraction * one_min_alpha;
-			outRightTorqueFraction = outRightTorqueFraction * one_min_alpha + alpha;
-		}
-	}
-
-	// Assert the values add up to 1
-	JPH_ASSERT(abs(outLeftTorqueFraction + outRightTorqueFraction - 1.0f) < 1.0e-6f);
-}
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/VehicleDifferential.h

@@ -1,39 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/ObjectStream/SerializableObject.h>
-#include <Jolt/Core/StreamIn.h>
-#include <Jolt/Core/StreamOut.h>
-
-JPH_NAMESPACE_BEGIN
-
-class JPH_EXPORT VehicleDifferentialSettings
-{
-	JPH_DECLARE_SERIALIZABLE_NON_VIRTUAL(JPH_EXPORT, VehicleDifferentialSettings)
-
-public:
-	/// Saves the contents in binary form to inStream.
-	void					SaveBinaryState(StreamOut &inStream) const;
-
-	/// Restores the contents in binary form to inStream.
-	void					RestoreBinaryState(StreamIn &inStream);
-
-	/// Calculate the torque ratio between left and right wheel
-	/// @param inLeftAngularVelocity Angular velocity of left wheel (rad / s)
-	/// @param inRightAngularVelocity Angular velocity of right wheel (rad / s)
-	/// @param outLeftTorqueFraction Fraction of torque that should go to the left wheel
-	/// @param outRightTorqueFraction Fraction of torque that should go to the right wheel
-	void					CalculateTorqueRatio(float inLeftAngularVelocity, float inRightAngularVelocity, float &outLeftTorqueFraction, float &outRightTorqueFraction) const;
-
-	int						mLeftWheel = -1;							///< Index (in mWheels) that represents the left wheel of this differential (can be -1 to indicate no wheel)
-	int						mRightWheel = -1;							///< Index (in mWheels) that represents the right wheel of this differential (can be -1 to indicate no wheel)
-	float					mDifferentialRatio = 3.42f;					///< Ratio between rotation speed of gear box and wheels
-	float					mLeftRightSplit = 0.5f;						///< Defines how the engine torque is split across the left and right wheel (0 = left, 0.5 = center, 1 = right)
-	float					mLimitedSlipRatio = 1.4f;					///< Ratio max / min wheel speed. When this ratio is exceeded, all torque gets distributed to the slowest moving wheel. This allows implementing a limited slip differential. Set to FLT_MAX for an open differential. Value should be > 1.
-	float					mEngineTorqueRatio = 1.0f;					///< How much of the engines torque is applied to this differential (0 = none, 1 = full), make sure the sum of all differentials is 1.
-};
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/VehicleEngine.cpp

@@ -1,122 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#include <Jolt/Jolt.h>
-
-#include <Jolt/Physics/Vehicle/VehicleEngine.h>
-#include <Jolt/ObjectStream/TypeDeclarations.h>
-#ifdef JPH_DEBUG_RENDERER
-	#include <Jolt/Renderer/DebugRenderer.h>
-#endif // JPH_DEBUG_RENDERER
-
-JPH_NAMESPACE_BEGIN
-
-JPH_IMPLEMENT_SERIALIZABLE_NON_VIRTUAL(VehicleEngineSettings)
-{
-	JPH_ADD_ATTRIBUTE(VehicleEngineSettings, mMaxTorque)
-	JPH_ADD_ATTRIBUTE(VehicleEngineSettings, mMinRPM)
-	JPH_ADD_ATTRIBUTE(VehicleEngineSettings, mMaxRPM)
-	JPH_ADD_ATTRIBUTE(VehicleEngineSettings, mNormalizedTorque)
-}
-
-VehicleEngineSettings::VehicleEngineSettings()
-{
-	mNormalizedTorque.Reserve(3);
-	mNormalizedTorque.AddPoint(0.0f, 0.8f);
-	mNormalizedTorque.AddPoint(0.66f, 1.0f);
-	mNormalizedTorque.AddPoint(1.0f, 0.8f);
-}
-
-void VehicleEngineSettings::SaveBinaryState(StreamOut &inStream) const
-{
-	inStream.Write(mMaxTorque);
-	inStream.Write(mMinRPM);
-	inStream.Write(mMaxRPM);
-	mNormalizedTorque.SaveBinaryState(inStream);
-}
-
-void VehicleEngineSettings::RestoreBinaryState(StreamIn &inStream)
-{
-	inStream.Read(mMaxTorque);
-	inStream.Read(mMinRPM);
-	inStream.Read(mMaxRPM);
-	mNormalizedTorque.RestoreBinaryState(inStream);
-}
-
-void VehicleEngine::ApplyTorque(float inTorque, float inDeltaTime)
-{
-	// Accelerate engine using torque
-	mCurrentRPM += cAngularVelocityToRPM * inTorque * inDeltaTime / mInertia;
-	ClampRPM();
-}
-
-void VehicleEngine::ApplyDamping(float inDeltaTime)
-{
-	// Angular damping: dw/dt = -c * w
-	// Solution: w(t) = w(0) * e^(-c * t) or w2 = w1 * e^(-c * dt)
-	// Taylor expansion of e^(-c * dt) = 1 - c * dt + ...
-	// Since dt is usually in the order of 1/60 and c is a low number too this approximation is good enough
-	mCurrentRPM *= max(0.0f, 1.0f - mAngularDamping * inDeltaTime);
-	ClampRPM();
-}
-
-#ifdef JPH_DEBUG_RENDERER
-
-void VehicleEngine::DrawRPM(DebugRenderer *inRenderer, RVec3Arg inPosition, Vec3Arg inForward, Vec3Arg inUp, float inSize, float inShiftDownRPM, float inShiftUpRPM) const
-{
-	// Function to draw part of a pie
-	auto draw_pie = [this, inRenderer, inSize, inPosition, inForward, inUp](float inMinRPM, float inMaxRPM, Color inColor) {
-		inRenderer->DrawPie(inPosition, inSize, inForward, inUp, ConvertRPMToAngle(inMinRPM), ConvertRPMToAngle(inMaxRPM), inColor, DebugRenderer::ECastShadow::Off);
-	};
-
-	// Draw segment under min RPM
-	draw_pie(0, mMinRPM, Color::sGrey);
-
-	// Draw segment until inShiftDownRPM
-	if (mCurrentRPM < inShiftDownRPM)
-	{
-		draw_pie(mMinRPM, mCurrentRPM, Color::sRed);
-		draw_pie(mCurrentRPM, inShiftDownRPM, Color::sDarkRed);
-	}
-	else
-	{
-		draw_pie(mMinRPM, inShiftDownRPM, Color::sRed);
-	}
-
-	// Draw segment between inShiftDownRPM and inShiftUpRPM
-	if (mCurrentRPM > inShiftDownRPM && mCurrentRPM < inShiftUpRPM)
-	{
-		draw_pie(inShiftDownRPM, mCurrentRPM, Color::sOrange);
-		draw_pie(mCurrentRPM, inShiftUpRPM, Color::sDarkOrange);
-	}
-	else
-	{
-		draw_pie(inShiftDownRPM, inShiftUpRPM, mCurrentRPM <= inShiftDownRPM? Color::sDarkOrange : Color::sOrange);
-	}
-
-	// Draw segment above inShiftUpRPM
-	if (mCurrentRPM > inShiftUpRPM)
-	{
-		draw_pie(inShiftUpRPM, mCurrentRPM, Color::sGreen);
-		draw_pie(mCurrentRPM, mMaxRPM, Color::sDarkGreen);
-	}
-	else
-	{
-		draw_pie(inShiftUpRPM, mMaxRPM, Color::sDarkGreen);
-	}
-}
-
-#endif // JPH_DEBUG_RENDERER
-
-void VehicleEngine::SaveState(StateRecorder &inStream) const
-{
-	inStream.Write(mCurrentRPM);
-}
-
-void VehicleEngine::RestoreState(StateRecorder &inStream)
-{
-	inStream.Read(mCurrentRPM);
-}
-
-JPH_NAMESPACE_END