@itwin/core-geometry 3.0.0-dev.76 → 3.0.0-dev.80

package/lib/curve/spiral/DirectSpiral3d.d.ts

@@ -1,264 +0,0 @@
-import { GeometryHandler, IStrokeHandler } from "../../geometry3d/GeometryHandler";
-import { Plane3dByOriginAndUnitNormal } from "../../geometry3d/Plane3dByOriginAndUnitNormal";
-import { Plane3dByOriginAndVectors } from "../../geometry3d/Plane3dByOriginAndVectors";
-import { Point3d } from "../../geometry3d/Point3dVector3d";
-import { Range3d } from "../../geometry3d/Range";
-import { Ray3d } from "../../geometry3d/Ray3d";
-import { Segment1d } from "../../geometry3d/Segment1d";
-import { Transform } from "../../geometry3d/Transform";
-import { LineString3d } from "../LineString3d";
-import { StrokeOptions } from "../StrokeOptions";
-import { TransitionConditionalProperties } from "./TransitionConditionalProperties";
-import { XYCurveEvaluator } from "./XYCurveEvaluator";
-import { TransitionSpiral3d } from "./TransitionSpiral3d";
-import { Angle } from "../../geometry3d/Angle";
-/**
-* DirectSpiral3d acts like a TransitionSpiral3d for serialization purposes, but implements spiral types that have "direct" xy calculations without the integrations required
-* for IntegratedSpiral3d.
-* * Each DirectSpiral3d carries an XYCurveEvaluator to give it specialized behavior.
-* * Direct spirals that flow through serialization to native imodel02 are create with these static methods:
-*   * createArema
-*   * createJapaneseCubic
-*   * createAustralianRail
-*   * createDirectHalfCosine
-*   * createChineseCubic
-*   * createCzechCubic
-*   * createPolishCubic
-*   * createItalian
-*   * createWesternAustralian
-* @public
-*/
-export declare class DirectSpiral3d extends TransitionSpiral3d {
-    /** String name for schema properties */
-    readonly curvePrimitiveType = "transitionSpiral";
-    /** stroked approximation of entire spiral. */
-    private _globalStrokes;
-    /** stroked approximation of active spiral.
-     * * Same count as global -- possibly overly fine, but it gives some consistency between same clothoid constructed as partial versus complete.
-     * * If no trimming, this points to the same place as the _globalStrokes !!!  Don't double transform!!!
-     */
-    private _activeStrokes?;
-    /** Return the internal stroked form of the (possibly partial) spiral   */
-    get activeStrokes(): LineString3d;
-    private _nominalL1;
-    private _nominalR1;
-    private _evaluator;
-    /** Return the nominal end radius. */
-    get nominalR1(): number;
-    /** Return the nominal distance from inflection to endpoint. */
-    get nominalL1(): number;
-    /** Return the nominal end curvature */
-    get nominalCurvature1(): number;
-    /** Return the low level evaluator
-     * @internal
-     */
-    get evaluator(): XYCurveEvaluator;
-    constructor(localToWorld: Transform, spiralType: string | undefined, originalProperties: TransitionConditionalProperties | undefined, nominalL1: number, nominalR1: number, activeFractionInterval: Segment1d | undefined, evaluator: XYCurveEvaluator);
-    /**
-     * Compute stroke data in an interval.
-     * @param strokes strokes to clear and refill.
-     * @param fraction0 start fraction
-     * @param fraction1 end fraction
-     */
-    private computeStrokes;
-    /** Recompute strokes */
-    refreshComputedProperties(): void;
-    /**
-     * Create a spiral object which uses numXTerm terms from the clothoid X series and numYTerm from the clothoid Y series.
-     * @param numXTerm  number of terms to use from X series
-     * @param numYTerm number of terms to use from Y series
-     * @param localToWorld placement frame.  Inflection point is at origin, initial direction is along x axis.
-     * @param nominalL1 design distance from inflection to end point.
-     * @param nominalR1 design radius at end point.
-     * @param activeInterval active interval (as fractions of nominalL1 !!!)
-     */
-    static createTruncatedClothoid(spiralType: string, localToWorld: Transform, numXTerm: number, numYTerm: number, originalProperties: TransitionConditionalProperties | undefined, nominalL1: number, nominalR1: number, activeInterval: Segment1d | undefined): DirectSpiral3d | undefined;
-    /**
-     * Create an Japanese spiral clothoid approximation
-     *   * X is 1 terms of the clothoid series as a function of nominal distance along.
-     *   * Y is 1 terms f the clothoid series as a function of nominal distance along.
-     *   * Remark: This is identical to the ChineseCubic
-     * @param localToWorld axes with inflection at origin, tangent along x axis
-     * @param nominalL1 nominal length as used in series LR terms.
-     * @param nominalR1 nominal final radius as used in series LR terms
-     * @param activeInterval fractional interval with (0, nominalL1) range for nominal distance along
-     */
-    static createJapaneseCubic(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create a czech cubic.
-     * This is y= m*x^3 with
-     * * x any point on the x axis
-     * * `fraction` along the spiral goes to `x = fraction * L`
-     * * m is gamma / (6RL)
-     *    * 1/(6RL) is the leading term of the sine series.
-     *    * `gamma = 2R/sqrt (4RR-LL)` pushes y up a little bit to simulate the lost series terms.
-     * @param localToWorld
-     * @param nominalLx nominal length along x axis
-     * @param nominalR1
-     * @param activeInterval
-     */
-    static createCzechCubic(localToWorld: Transform, nominalLx: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create an italian spiral
-     * This is y= m*x^3 with
-     * * x any point on the x axis
-     * * `fraction` along the spiral goes to `x = fraction * L`
-     * * m is gamma / (6RL)
-     *    * 1/(6RL) is the leading term of the sine series.
-     *    * `gamma = 2R/sqrt (4RR-LL)` pushes y up a little bit to simulate the lost series terms.
-     * * L in gamma and m is the
-     * @param localToWorld
-     * @param nominalL1 nominal length along the spiral
-     * @param nominalR1
-     * @param activeInterval
-     */
-    static createItalian(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create an MX Cubic whose nominal length is close to along the curve.
-     * This is y= m*x^3 with
-     * * m is 1/ (6RL1)
-     *    * 1/(6RL) is the leading term of the sine series.
-     * * L1 is an along-the-x-axis distance that is slightly LESS THAN the nominal length
-     * * x is axis position that is slightly LESS than nominal distance along
-     * * L1, x use the approximation   `x = s * ( 1 - s^4/ (40 R R L L))
-     * @param localToWorld
-     * @param nominalL1
-     * @param nominalR1
-     * @param activeInterval
-     */
-    static createMXCubicAlongArc(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create a polish cubic
-     * This is y= m*x^3 with
-     * * m is 1/ (6RL)
-     *    * 1/(6RL) is the leading term of the sine series.
-     * * L is nominal length
-     * * R is nominal end radius.
-     * * x ranges up to the x axis distance for which the polish distance series produces f(x)=L
-     * * The support class PolishCubicEvaluator has static methods for the distance series and its inversion.
-     */
-    static createPolishCubic(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create an AustralianRailCorp spiral
-     * This is y= m*x^3 with
-     * * x any point on the x axis
-     * * `fraction` along the spiral goes to `x = fraction * L`
-     * * m is gamma / (6RL)
-     *    * 1/(6RL) is the leading term of the sine series.
-     *    * `gamma = 2R/sqrt (4RR-LL)` pushes y up a little bit to simulate the lost series terms.
-     * @param localToWorld
-     * @param nominalL1
-     * @param nominalR1
-     * @param activeInterval
-     */
-    static createAustralianRail(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    static createDirectHalfCosine(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create an Arema spiral clothoid approximation
-     *   * X is 2 terms of the clothoid series as a function of nominal distance along
-     *   * Y is 2 terms f the clothoid series as a function of nominal distance along
-     *   * Remark: This is identical to the ChineseCubic
-     * @param localToWorld axes with inflection at origin, tangent along x axis
-     * @param nominalL1 nominal length as used in series LR terms.
-     * @param nominalR1 nominal final radius as used in series LR terms
-     * @param activeInterval fractional interval with (0, nominalL1) range for nominal distance along
-     */
-    static createArema(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create a Chinese clothoid approximation
-     *   * X is 2 terms of the clothoid series as a function of nominal distance along
-     *   * Y is 2 terms f the clothoid series as a function of nominal distance along
-     *   * Remark: This is identical to the Arema spiral
-     * @param localToWorld axes with inflection at origin, tangent along x axis
-     * @param nominalL1 nominal length as used in series LR terms.
-     * @param nominalR1 nominal final radius as used in series LR terms
-     * @param activeInterval fractional interval with (0, nominalL1) range for nominal distance along
-     */
-    static createChineseCubic(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create a Western Australian direct spiral.
-     *   * X is 2 terms of the clothoid series as a function of distance along
-     *   * Y is 1 term (cubic in nominal distance along)
-     * @param localToWorld axes with inflection at origin, tangent along x axis
-     * @param nominalL1 nominal length as used in series LR terms.
-     * @param nominalR1 nominal final radius as used in series LR terms
-     * @param activeInterval fractional interval with (0, nominalL1) range for nominal distance along
-     */
-    static createWesternAustralian(localToWorld: Transform, nominalL1: number, nominalR1: number, activeInterval?: Segment1d): DirectSpiral3d | undefined;
-    /**
-     * Create (if possible) a DirectSpiral3d, applying various strict conditions appropriate to the spiral type.
-     * The parameter list includes extraneous values in order to directly match IntegratedSpiral3d.create, which has greater flexibility about
-     *    mixtures of values.
-     * * IMPORTANT RESTRICTIONS
-     *   * Direct spirals must have the inflection at the origin of their coordinate system, aligned with the x axis.
-     *      * hence bearing0 = 0
-     *      * hence radius0 = 0
-     *   * bearing1 is ignored
-     *   * radius1 must be given.
-     *   * arcLength must be given,
-     * @param spiralType one of the types in `DirectSpiralTypeNames`
-     * @param radius0 radius (or 0 for tangent to line) at start.   Must be ZERO or UNDEFINED
-     * @param radius1 radius (or 0 for tangent to line) at end.
-     * @param bearing0 bearing, measured CCW from x axis at start.   Must be ZERO or UNDEFINED
-     * @param bearing1 bearing, measured CCW from x axis at end.    IGNORED.
-     * @param fractionInterval optional fractional interval for an "active" portion of the curve.   if omitted, the full [0,1] is used.
-     * @param localToWorld placement transform
-     */
-    static createFromLengthAndRadius(spiralType: string, radius0: number | undefined, radius1: number | undefined, bearing0: Angle | undefined, _bearing1: Angle | undefined, arcLength: number | undefined, activeInterval: undefined | Segment1d, localToWorld: Transform): TransitionSpiral3d | undefined;
-    /** Deep clone of this spiral */
-    clone(): DirectSpiral3d;
-    /** apply `transform` to this spiral's local to world transform. */
-    tryTransformInPlace(transformA: Transform): boolean;
-    /** Clone with a transform applied  */
-    cloneTransformed(transform: Transform): DirectSpiral3d;
-    /** Return the spiral start point. */
-    startPoint(): Point3d;
-    /** return the spiral end point. */
-    endPoint(): Point3d;
-    /** test if the local to world transform places the spiral xy plane into `plane` */
-    isInPlane(plane: Plane3dByOriginAndUnitNormal): boolean;
-    /** Return quick length of the spiral.
-     * The tangent vector of a true clothoid is length 1 everywhere, so simple proportion of nominalL1 is a good approximation.
-     */
-    quickLength(): number;
-    /** Return length of the spiral.
-     * * True length is stored at back of uvParams . . .
-     */
-    curveLength(): number;
-    /** Test if `other` is an instance of `TransitionSpiral3d` */
-    isSameGeometryClass(other: any): boolean;
-    /** Add strokes from this spiral to `dest`.
-     * * Linestrings will usually stroke as just their points.
-     * * If maxEdgeLength is given, this will sub-stroke within the linestring -- not what we want.
-     */
-    emitStrokes(dest: LineString3d, options?: StrokeOptions): void;
-    /** emit stroke fragments to `dest` handler. */
-    emitStrokableParts(dest: IStrokeHandler, options?: StrokeOptions): void;
-    /**
-     * return the stroke count required for given options.
-     * @param options StrokeOptions that determine count
-     */
-    computeStrokeCountForOptions(options?: StrokeOptions): number;
-    /** Reverse the active interval and active strokes.
-     * * Primary defining data remains unchanged !!!
-     */
-    reverseInPlace(): void;
-    /** Evaluate curve point with respect to fraction. */
-    fractionToPoint(activeFraction: number, result?: Point3d): Point3d;
-    /** Evaluate curve point and derivative with respect to fraction. */
-    fractionToPointAndDerivative(activeFraction: number, result?: Ray3d): Ray3d;
-    /** Return a plane with
-     *
-     * * origin at fractional position along the curve
-     * * vectorU is the first derivative, i.e. tangent vector with length equal to the rate of change with respect to the fraction.
-     * * vectorV is the second derivative, i.e.derivative of vectorU.
-     */
-    fractionToPointAnd2Derivatives(activeFraction: number, result?: Plane3dByOriginAndVectors): Plane3dByOriginAndVectors | undefined;
-    /** Second step of double dispatch:  call `handler.handleTransitionSpiral(this)` */
-    dispatchToGeometryHandler(handler: GeometryHandler): any;
-    /** extend the range by the strokes of the spiral */
-    extendRange(rangeToExtend: Range3d, transform?: Transform): void;
-    /** compare various coordinate quantities */
-    isAlmostEqual(other: any): boolean;
-}
-//# sourceMappingURL=DirectSpiral3d.d.ts.map

package/lib/curve/spiral/DirectSpiral3d.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"DirectSpiral3d.d.ts","sourceRoot":"","sources":["../../../src/curve/spiral/DirectSpiral3d.ts"],"names":[],"mappings":"AAQA,OAAO,EAAE,eAAe,EAAE,cAAc,EAAE,MAAM,kCAAkC,CAAC;AACnF,OAAO,EAAE,4BAA4B,EAAE,MAAM,+CAA+C,CAAC;AAC7F,OAAO,EAAE,yBAAyB,EAAE,MAAM,4CAA4C,CAAC;AACvF,OAAO,EAAE,OAAO,EAAE,MAAM,kCAAkC,CAAC;AAC3D,OAAO,EAAE,OAAO,EAAE,MAAM,wBAAwB,CAAC;AACjD,OAAO,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AAC/C,OAAO,EAAE,SAAS,EAAE,MAAM,4BAA4B,CAAC;AACvD,OAAO,EAAE,SAAS,EAAE,MAAM,4BAA4B,CAAC;AACvD,OAAO,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,kBAAkB,CAAC;AACjD,OAAO,EAAE,+BAA+B,EAAE,MAAM,mCAAmC,CAAC;AAKpF,OAAO,EAAE,gBAAgB,EAAE,MAAM,oBAAoB,CAAC;AACtD,OAAO,EAAE,kBAAkB,EAAE,MAAM,sBAAsB,CAAC;AAC1D,OAAO,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AAG/C;;;;;;;;;;;;;;;EAeE;AACF,qBAAa,cAAe,SAAQ,kBAAkB;IAEpD,wCAAwC;IAExC,SAAgB,kBAAkB,sBAAsB;IAExD,8CAA8C;IAC9C,OAAO,CAAC,cAAc,CAAe;IACrC;;;OAGG;IACH,OAAO,CAAC,cAAc,CAAC,CAAe;IACtC,0EAA0E;IAC1E,IAAW,aAAa,IAAI,YAAY,CAA0F;IAElI,OAAO,CAAC,UAAU,CAAS;IAC3B,OAAO,CAAC,UAAU,CAAS;IAC3B,OAAO,CAAC,UAAU,CAAmB;IAErC,qCAAqC;IACrC,IAAW,SAAS,IAAI,MAAM,CAA4B;IAC1D,+DAA+D;IAC/D,IAAW,SAAS,IAAI,MAAM,CAA4B;IAC1D,uCAAuC;IACvC,IAAW,iBAAiB,IAAI,MAAM,CAAkE;IACxG;;OAEG;IACH,IAAW,SAAS,IAAI,gBAAgB,CAA4B;gBAKlE,YAAY,EAAE,SAAS,EACvB,UAAU,EAAE,MAAM,GAAG,SAAS,EAC9B,kBAAkB,EAAE,+BAA+B,GAAG,SAAS,EAC/D,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,sBAAsB,EAAE,SAAS,GAAG,SAAS,EAC7C,SAAS,EAAE,gBAAgB;IAU7B;;;;;OAKG;IACH,OAAO,CAAC,cAAc;IA4BtB,wBAAwB;IACjB,yBAAyB;IAUhC;;;;;;;;OAQG;WACW,uBAAuB,CACnC,UAAU,EAAE,MAAM,EAClB,YAAY,EAAE,SAAS,EACvB,QAAQ,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAClC,kBAAkB,EAAE,+BAA+B,GAAG,SAAS,EAC/D,SAAS,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EACpC,cAAc,EAAE,SAAS,GAAG,SAAS,GAAG,cAAc,GAAG,SAAS;IAapE;;;;;;;;;OASG;WACW,mBAAmB,CAC/B,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAGzD;;;;;;;;;;;;OAYG;WACW,gBAAgB,CAC5B,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAWzD;;;;;;;;;;;;;OAaG;WACW,aAAa,CACzB,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAYzD;;;;;;;;;;;;OAYG;WACW,qBAAqB,CACjC,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAYzD;;;;;;;;;OASG;WACW,iBAAiB,CAC7B,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAYzD;;;;;;;;;;;;OAYG;WACW,oBAAoB,CAChC,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;WAY3C,sBAAsB,CAClC,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAIzD;;;;;;;;;OASG;WACW,WAAW,CACvB,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAIzD;;;;;;;;;OASG;WACW,kBAAkB,CAC9B,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAGzD;;;;;;;;OAQG;WACW,uBAAuB,CACnC,YAAY,EAAE,SAAS,EACvB,SAAS,EAAE,MAAM,EACjB,SAAS,EAAE,MAAM,EACjB,cAAc,CAAC,EAAE,SAAS,GAAG,cAAc,GAAG,SAAS;IAGzD;;;;;;;;;;;;;;;;;;OAkBG;WACW,yBAAyB,CACrC,UAAU,EAAE,MAAM,EAClB,OAAO,EAAE,MAAM,GAAG,SAAS,EAC3B,OAAO,EAAE,MAAM,GAAG,SAAS,EAC3B,QAAQ,EAAE,KAAK,GAAG,SAAS,EAC3B,SAAS,EAAE,KAAK,GAAG,SAAS,EAC5B,SAAS,EAAE,MAAM,GAAG,SAAS,EAC7B,cAAc,EAAE,SAAS,GAAG,SAAS,EACrC,YAAY,EAAE,SAAS,GAAG,kBAAkB,GAAG,SAAS;IA+B1D,gCAAgC;IACzB,KAAK,IAAI,cAAc;IAU9B,mEAAmE;IAC5D,mBAAmB,CAAC,UAAU,EAAE,SAAS,GAAG,OAAO;IAU1D,sCAAsC;IAC/B,gBAAgB,CAAC,SAAS,EAAE,SAAS,GAAG,cAAc;IAK7D,qCAAqC;IACrB,UAAU,IAAI,OAAO;IACrC,mCAAmC;IACnB,QAAQ,IAAI,OAAO;IACnC,mFAAmF;IAC5E,SAAS,CAAC,KAAK,EAAE,4BAA4B,GAAG,OAAO;IAK9D;;OAEG;IACI,WAAW;IAKlB;;OAEG;IACa,WAAW;IAC3B,6DAA6D;IACtD,mBAAmB,CAAC,KAAK,EAAE,GAAG,GAAG,OAAO;IAC/C;;;OAGG;IACI,WAAW,CAAC,IAAI,EAAE,YAAY,EAAE,OAAO,CAAC,EAAE,aAAa,GAAG,IAAI;IACrE,+CAA+C;IACxC,kBAAkB,CAAC,IAAI,EAAE,cAAc,EAAE,OAAO,CAAC,EAAE,aAAa,GAAG,IAAI;IAa9E;;;OAGG;IAEI,4BAA4B,CAAC,OAAO,CAAC,EAAE,aAAa,GAAG,MAAM;IAepE;;OAEG;IAEI,cAAc,IAAI,IAAI;IAM7B,qDAAqD;IAC9C,eAAe,CAAC,cAAc,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,OAAO,GAAG,OAAO;IAMzE,oEAAoE;IAC7D,4BAA4B,CAAC,cAAc,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,KAAK,GAAG,KAAK;IAQlF;;;;;OAKG;IAEI,8BAA8B,CAAC,cAAc,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,yBAAyB,GAAG,yBAAyB,GAAG,SAAS;IASxI,mFAAmF;IAC5E,yBAAyB,CAAC,OAAO,EAAE,eAAe,GAAG,GAAG;IAG/D,oDAAoD;IAC7C,WAAW,CAAC,aAAa,EAAE,OAAO,EAAE,SAAS,CAAC,EAAE,SAAS,GAAG,IAAI;IAGvE,4CAA4C;IAC5B,aAAa,CAAC,KAAK,EAAE,GAAG,GAAG,OAAO;CAUnD"}