ysk-server-shared 1.1.24 → 1.1.26

package/locales/zh-CN/cdn.json

@@ -30,8 +30,68 @@
   "confWritten": "已写入 conf（{{status}}）",
   "partialFail": "未全部成功（{{status}}）— 见 notes",
   "statNodes": "节点",
+  "hitNoStats": "尚无边缘统计",
+  "loopbackOriginBlocked": "不会把回环 origin {{url}} 写到远端边缘。请先改成可达的 origin。",
+  "applyFailedHint": "套用失败 — 见下方说明",
+  "applyFailedNoNote": "没有存下失败原因。请再套用一次以记录错误。",
+  "applyStatus": {
+    "draft": "草稿",
+    "planned": "已计划",
+    "applying": "套用中",
+    "applied": "已套用",
+    "failed": "失败",
+    "partial": "部分"
+  },
   "statSites": "站点",
+  "statSitesCount": "站点 {{n}}",
+  "cacheMethod": {
+    "none": "无法估计",
+    "access_log": "存取日志",
+    "cache_dir": "快取目录",
+    "log_format": "需设定日志格式"
+  },
+  "geoMapLabel": "地区对照（JSON）",
+  "statApplyFailed": "套用失败",
+  "pillNodesSites": "{{n}} 个节点 · {{s}} 个站点",
+  "statOnline": "线上",
+  "statHit": "命中率",
+  "hitUnknown": "未知",
+  "lastHealthHint": "最后一次探测 {{at}} · {{ok}}",
+  "lastHealthNever": "尚未探测 — 运行 Probe",
+  "lastHealthFail": "探测失败",
+  "healthLoopNeedSites": "先添加站点",
+  "nodeStatus": {
+    "online": "在线的",
+    "offline": "离线",
+    "draining": "排水",
+    "unknown": "未知"
+  },
   "recentNotes": "最近 notes",
+  "previewOnlyNote": "本次仅预览，未写入边缘。",
+  "statByRegion": "区域：",
+  "statByApply": "套用状态：",
+  "col": {
+    "origin": "来源站",
+    "edges": "边缘数",
+    "apply": "套用状态",
+    "dns": "DNS",
+    "edgesOnline": "边缘 线上／已套用",
+    "dnsRr": "CDN DNS 记录"
+  },
+  "mode": {
+    "origin_pull": "回源拉取",
+    "reverse_proxy": "反向代理",
+    "static_edge": "静态边缘"
+  },
+  "dnsStrategy": {
+    "multi_a": "多 A 记录",
+    "cname": "CNAME",
+    "geo": "地区"
+  },
+  "edgesOnlineApplied": "线上 {{online}}/{{total}} · 已套用 {{applied}}",
+  "hitMiss": "命中 {{hits}}／未命中 {{misses}}",
+  "cacheBytes": "快取约 {{n}} B",
+  "hitRateUnknown": "找不到含快取状态的存取日志，也没有快取目录，因此无法估算命中率。",
   "edgeConfPreview": "Nginx edge conf 预览",
   "tabs": {
     "nodes": "节点",
@@ -41,10 +101,40 @@
   },
   "nodesTitle": "CDN 节点（{{count}}）",
   "nodesDesc": "登记 control / origin / edge / dns。探活更新 status。",
+  "offlineHint": "离线／探活失败。若是测试残留，可删除此节点。",
   "colName": "名称",
   "colRole": "角色",
   "colStatus": "状态",
   "clearDrain": "解除 drain",
+  "drain": "流走",
+  "drainTitle": "停止向此边缘发送新的 CDN 流量",
+  "drainDesc": "排空“{{name}}”？现有连接将保留直至完成。",
+  "drainLastTitle": "这是最后一个边缘——排水将使每个站点都没有边缘",
+  "drainLastDesc": "“{{name}}”是唯一的边缘。将其排干后，所有站点都没有边缘。",
+  "clearDrainTitle": "再次在此边缘接受新流量",
+  "clearDrainDesc": "清理“{{name}}”上的排水管吗？",
+  "deleteNodeTitle": "删除此 CDN 边缘",
+  "deleteLastNodeTitle": "删除最后一条边——所有站点都将没有边",
+  "purge": "清除",
+  "previewTitle": "预览 nginx 配置（不写）",
+  "writeConfTitle": "编写边缘 nginx 配置文件",
+  "applyEdgesTitle": "将此站点应用到边缘（写入 nginx）",
+  "purgeTitle": "清除边缘缓存",
+  "dnsSyncTitle": "写入CDN DNS记录",
+  "probeDnsTitle": "探测边缘和 DNS（只读）",
+  "distSslTitle": "将 TLS 材质复制到边缘",
+  "leIssueTitle": "颁发 Let’s Encrypt 证书并分发",
+  "deleteSiteTitle": "删除此 CDN 站点",
+  "siteOpConfirmGeneric": "对“{{name}}”运行此操作吗？",
+  "siteOpConfirmDesc": "站点“{{name}}”·{{action}}。这可以更改 nginx、DNS 或证书。",
+  "siteOpConfirm": {
+    "apply": "将这个网站应用到边缘？",
+    "render": "为这个站点编写 nginx 配置吗？",
+    "purge": "清除该网站的缓存吗？",
+    "dns-sync": "同步此站点的 DNS 吗？",
+    "dist": "将 TLS 分发到边缘？",
+    "issue": "问题让我们加密并分发？"
+  },
   "emptyNodesTitle": "尚未登記 CDN 节点",
   "emptyNodesDesc": "请使用右上角「+ 新增节点」登记 edge，再创建站点。",
   "sitesTitle": "CDN 站点（{{count}}）",
@@ -116,100 +206,10 @@
   "deleteSiteDesc": "将删除 CDN 站点「{{name}}」。",
   "deleteSiteC1": "站点策略与边缘关联",
   "deleteSiteC2": "已下发的 nginx 配置需另行清理或重新应用",
-  "statOnline": "线上",
-  "statOffline": "离线 {{n}}",
-  "statHitRate": "命中率 {{v}}",
-  "hitNoStats": "尚无边缘统计",
-  "loopbackOriginBlocked": "不会把回环 origin {{url}} 写到远端边缘。请先改成可达的 origin。",
-  "applyFailedHint": "套用失败 — 见下方说明",
-  "applyStatus": {
-    "draft": "草稿",
-    "planned": "已计划",
-    "applying": "套用中",
-    "applied": "已套用",
-    "failed": "失败",
-    "partial": "部分"
-  },
-  "drain": "流走",
-  "drainTitle": "停止向此边缘发送新的 CDN 流量",
-  "drainDesc": "排空“{{name}}”？现有连接将保留直至完成。",
-  "drainLastTitle": "这是最后一个边缘——排水将使每个站点都没有边缘",
-  "drainLastDesc": "“{{name}}”是唯一的边缘。将其排干后，所有站点都没有边缘。",
-  "clearDrainTitle": "再次在此边缘接受新流量",
-  "clearDrainDesc": "清理“{{name}}”上的排水管吗？",
-  "deleteNodeTitle": "删除此 CDN 边缘",
-  "deleteLastNodeTitle": "删除最后一条边——所有站点都将没有边",
-  "purge": "清除",
-  "previewTitle": "预览 nginx 配置（不写）",
-  "writeConfTitle": "编写边缘 nginx 配置文件",
-  "applyEdgesTitle": "将此站点应用到边缘（写入 nginx）",
-  "purgeTitle": "清除边缘缓存",
-  "dnsSyncTitle": "写入CDN DNS记录",
-  "probeDnsTitle": "探测边缘和 DNS（只读）",
-  "distSslTitle": "将 TLS 材质复制到边缘",
-  "leIssueTitle": "颁发 Let’s Encrypt 证书并分发",
-  "deleteSiteTitle": "删除此 CDN 站点",
-  "siteOpConfirmGeneric": "对“{{name}}”运行此操作吗？",
-  "siteOpConfirmDesc": "站点“{{name}}”·{{action}}。这可以更改 nginx、DNS 或证书。",
-  "siteOpConfirm": {
-    "apply": "将这个网站应用到边缘？",
-    "render": "为这个站点编写 nginx 配置吗？",
-    "purge": "清除该网站的缓存吗？",
-    "dns-sync": "同步此站点的 DNS 吗？",
-    "dist": "将 TLS 分发到边缘？",
-    "issue": "问题让我们加密并分发？"
-  },
-  "pillNodesSites": "{{n}} 个节点 · {{s}} 个站点",
-  "statHit": "命中率",
-  "hitUnknown": "未知",
-  "lastHealthHint": "最后一次探测 {{at}} · {{ok}}",
-  "lastHealthNever": "尚未探测 — 运行 Probe",
-  "lastHealthFail": "探测失败",
-  "healthLoopNeedSites": "先添加站点",
-  "nodeStatus": {
-    "online": "在线的",
-    "offline": "离线",
-    "draining": "排水",
-    "unknown": "未知"
-  },
   "statOnlineOf": "线上 {{n}}/{{total}}",
-  "statDraining": "Draining {{n}}",
-  "localTest": "local / test",
-  "colRegion": "Region",
-  "previewOnlyNote": "Preview only — nothing was written to the edges.",
-  "statByRegion": "Region: ",
-  "statByApply": "Apply status: ",
-  "col": {
-    "origin": "Origin",
-    "edges": "Edges",
-    "apply": "Apply",
-    "dns": "DNS",
-    "edgesOnline": "Edges online / applied",
-    "dnsRr": "CDN DNS records"
-  },
-  "mode": {
-    "origin_pull": "Origin pull",
-    "reverse_proxy": "Reverse proxy",
-    "static_edge": "Static edge"
-  },
-  "dnsStrategy": {
-    "multi_a": "Multiple A records",
-    "cname": "CNAME",
-    "geo": "Geo"
-  },
-  "edgesOnlineApplied": "{{online}}/{{total}} online · {{applied}} applied",
-  "hitMiss": "Hits {{hits}} / misses {{misses}}",
-  "cacheBytes": "Cache ≈ {{n}} B",
-  "hitRateUnknown": "No access log with cache status and no cache directory, so hit rate cannot be estimated.",
-  "offlineHint": "Offline — probe failed. Remove the node if it is leftover.",
-  "applyFailedNoNote": "No stored reason. Re-apply to capture the error.",
-  "statApplyFailed": "Apply failed",
-  "statSitesCount": "{{n}} sites",
-  "cacheMethod": {
-    "none": "No estimate",
-    "access_log": "Access log",
-    "cache_dir": "Cache directory",
-    "log_format": "Need log format"
-  },
-  "geoMapLabel": "Geo map (JSON)"
+  "colRegion": "区域",
+  "statDraining": "排空中 {{n}}",
+  "statOffline": "离线 {{n}}",
+  "localTest": "本机／测试",
+  "statHitRate": "命中率 {{v}}"
 }

package/locales/zh-CN/cli.json

@@ -12,7 +12,7 @@
   },
   "help": {
     "blurb": "控制平面 CLI — AI agent 请优先用 --json。\n文档：docs/agent/README.md · docs/cli/reference.md · docs/agent/commands.json",
-    "main": "{{product}} ({{cli}}) v{{version}}\n\n控制平面 CLI — AI agent 请优先用 --json。\n文件：docs/agent/README.md · docs/cli/reference.md · docs/agent/commands.json\n\n用法：\n  {{cli}} <command> [options]\n\n命令：\n  setup                 初始化 dataDir + 管理员\n  update                自我更新检查／套用\n  serve                 HTTP API + Web UI\n  system unit-install   安装 ysk-server.service [--enable]\n  tools                 工具列表；tools run --tool <name> [--dry-run]\n  ask                   自然语言 → AI 计划 [--execute]\n  projects              list|get|create|deploy|stop|health|backup|template\n  backup                all|list|status|restore|delete|schedule|control-plane|settings|restic\n  templates             应用范本\n  hosting               nginx|dns|db|firewall 辅助\n  dns                   zone|zones（AI 别名 → hosting dns-*）\n  logs                  sources|query|journal|overview\n  host                  overview|metrics（唯读）\n  nginx                 status|list|test|sync\n  ssl                   list|get（憑证）\n  db-cluster            list|get|create|plan（HA 先计划）\n  ssh-key               list|create|import|public|export|install|delete（SSH 身分库）\n  ssh-2fa               list|enroll|confirm|install|pam|retire（SSH 登入 TOTP ≠ 面板 2FA）\n  services              主机服務矩阵（systemctl 探测）\n  defense | protection  status|ban|unban|whitelist\n  security              status|sessions|api-keys（2FA · 撤销工作阶段 · API 金钥）\n  cdn                   nodes|sites|render|apply|purge|probe|dashboard|health-loop|from-project\n  agents                runtimes|fleet list|commands|register（面板 + 边缘）\n  agent run             外送 fleet 轮询（实验）\n  store                 status|export|import|migrate（json|sqlite|postgres document 后端）\n  files                 list|read|write|mkdir|rm|stat|rename|copy|move|chmod|trash|shares（沙箱）\n  cron                  list|create|delete|enable|disable|run|install|status\n  email                 domains|mailboxes|deliverability|bootstrap|dns（面板对等）\n  health                本机模式快照或 --url http://host:port/health\n  readiness | doctor    生产就绪（诚实）\n  migrate               inventory|host|post|status|resume（整机迁移）\n  validators            list|chains|disk|get (Beta)\n  docker                status|ps|images|compose|prune (engine)\n  version | help\n\n全域：\n  --json                JSON 标准输出（AI）\n  --data-dir PATH\n  --config PATH\n  --help | --version\n\n结束码：0 成功 · 1 错误 · 2 验证 · 3 阻挡 · 4 找不到 · 5 主机错误\n\n安全：\n  危险操作预设 dry-run（只出计划）。\n  传 --execute（别名 --apply）+ 环境变数 YSK_EXECUTE=1 才改主机。\n\n例子：\n  {{cli}} readiness --json\n  {{cli}} host --json\n  {{cli}} nginx status --json\n  {{cli}} ssl list --json\n  {{cli}} projects get --id UUID --json\n  {{cli}} defense ban --ip 1.2.3.4 --json          # dry-run 计划\n  {{cli}} projects list --json\n  {{cli}} logs query --source journal: --lines 100 --json\n  {{cli}} tools --json"
+    "main": "{{product}} ({{cli}}) v{{version}}\n\n控制平面 CLI — AI agent 请优先用 --json。\n文件：docs/agent/README.md · docs/cli/reference.md · docs/agent/commands.json\n\n用法：\n  {{cli}} <command> [options]\n\n命令：\n  setup                 初始化 dataDir + 管理员\n  update                自我更新检查／套用\n  serve                 HTTP API + Web UI\n  system unit-install   安装 ysk-server.service [--enable]\n  tools                 工具列表；tools run --tool <name> [--dry-run]\n  ask                   自然语言 → AI 计划 [--execute]\n  projects              list|get|create|deploy|stop|health|backup|template\n  backup                all|list|status|restore|delete|schedule|control-plane|settings|restic\n  templates             应用范本\n  hosting               nginx|dns|db|firewall 辅助\n  dns                   zone|zones|lookup|ddns（AI 别名 → hosting dns-*）\n  logs                  sources|query|journal|overview\n  host                  overview|metrics（唯读）\n  nginx                 status|list|test|sync\n  ssl                   list|get（憑证）\n  db-cluster            list|get|create|plan（HA 先计划）\n  ssh-key               list|create|import|public|export|install|delete（SSH 身分库）\n  ssh-2fa               list|enroll|confirm|install|pam|retire（SSH 登入 TOTP ≠ 面板 2FA）\n  services              主机服務矩阵（systemctl 探测）\n  defense | protection  status|ban|unban|whitelist\n  security              status|sessions|api-keys（2FA · 撤销工作阶段 · API 金钥）\n  cdn                   nodes|sites|render|apply|purge|probe|dashboard|health-loop|from-project\n  agents                runtimes|fleet list|commands|register（面板 + 边缘）\n  agent run             外送 fleet 轮询（实验）\n  store                 status|export|import|migrate（json|sqlite|postgres document 后端）\n  files                 list|read|write|mkdir|rm|stat|rename|copy|move|chmod|trash|shares（沙箱）\n  cron                  list|create|update|delete|enable|disable|run|install|status|host\n  email                 domains|mailboxes|deliverability|bootstrap|dns（面板对等）\n  health                本机模式快照或 --url http://host:port/health\n  readiness | doctor    生产就绪（诚实）\n  migrate               inventory|host|post|status|resume（整机迁移）\n  validators            list|chains|disk|get|checklist (Beta)\n  docker                status|ps|images|compose|prune (engine)\n  version | help\n\n全域：\n  --json                JSON 标准输出（AI）\n  --data-dir PATH\n  --config PATH\n  --help | --version\n\n结束码：0 成功 · 1 错误 · 2 验证 · 3 阻挡 · 4 找不到 · 5 主机错误\n\n安全：\n  危险操作预设 dry-run（只出计划）。\n  传 --execute（别名 --apply）+ 环境变数 YSK_EXECUTE=1 才改主机。\n\n例子：\n  {{cli}} readiness --json\n  {{cli}} host --json\n  {{cli}} nginx status --json\n  {{cli}} ssl list --json\n  {{cli}} projects get --id UUID --json\n  {{cli}} defense ban --ip 1.2.3.4 --json          # dry-run 计划\n  {{cli}} projects list --json\n  {{cli}} logs query --source journal: --lines 100 --json\n  {{cli}} tools --json"
   },
   "usage": {
     "tools": {
@@ -115,7 +115,7 @@
         "--data-dir": {
           "path": {
             "--json": {
-              "0349e6": "用法： ysk-server cron <sub> [--data-dir PATH] [--json]\n  list [--project-id ID] [--q TEXT]\n  create --schedule \"0 3 * * *\" --command CMD [--project-id ID] [--user USER]\n  delete --id JOB_ID\n  enable|disable --id JOB_ID\n  run --id JOB_ID              # run-now (needs YSK_EXECUTE=1)\n  install                     # load managed crontab (needs EXECUTE)\n  status                      # probe managed file vs host crontab\nHonesty: install blocked without YSK_EXECUTE=1 (file still written).\n"
+              "0349e6": "用法： ysk-server cron <sub> [--data-dir PATH] [--json]\n  list [--project-id ID] [--q TEXT]\n  create --schedule \"0 3 * * *\" --command CMD [--project-id ID] [--user USER]\n  update --id JOB_ID [--schedule S] [--command CMD] [--user USER] [--project-id ID] [--enable|--disable]\n  delete --id JOB_ID\n  enable|disable --id JOB_ID\n  run --id JOB_ID              # run-now (needs YSK_EXECUTE=1)\n  install                     # load managed crontab (needs EXECUTE)\n  status                      # probe managed file vs host crontab\n  host [list] [--user USER] [--jobs-only]\n  host edit --user USER --old-schedule S --old-command C --schedule S --command C --execute\n  host disable|enable|delete|adopt --user USER --old-schedule S --old-command C --execute\n  host run --user USER --command C --execute\n诚实：未设置 YSK_EXECUTE=1 时，install 与 host 写入会封锁。\n"
             }
           }
         }

package/locales/zh-CN/common.json

@@ -1,4 +1,5 @@
 {
+  "all": "全部",
   "cancel": "取消",
   "confirm": "确认",
   "refresh": "刷新",
@@ -7,6 +8,9 @@
   "apply": "应用",
   "close": "关闭",
   "copy": "复制",
+  "copied": "已复制",
+  "expandAll": "全部展开",
+  "collapseAll": "全部折叠",
   "empty": "无数据",
   "back": "返回",
   "showTechnical": "显示技术详情",
@@ -21,11 +25,15 @@
   "languageNative": "简体中文",
   "language": "语言",
   "switchLanguage": "切换语言",
+  "showPassword": "展示",
+  "hidePassword": "隐藏",
   "searchGlobal": "搜索页面与资源…",
   "menu": "菜单",
   "processing": "处理中…",
+  "unavailable": "目前不可用",
   "retry": "重试",
   "success": "成功",
+  "ok": "正常",
   "failed": "失败",
   "blocked": "无法执行",
   "status": "状态",
@@ -38,6 +46,7 @@
   "pleaseFill": "请填写",
   "required": "必填",
   "about": "说明",
+  "more": "更多的",
   "operation": "操作",
   "delete": "删除",
   "edit": "编辑",
@@ -124,14 +133,5 @@
   "done": "完成",
   "next": "下一步",
   "previous": "上一步",
-  "all": "全部",
-  "showPassword": "展示",
-  "hidePassword": "隐藏",
-  "more": "更多的",
-  "redirectedTo": "已转到 {{to}}（原为 {{from}}）",
-  "unavailable": "Not available right now",
-  "ok": "OK",
-  "copied": "Copied",
-  "expandAll": "Expand all",
-  "collapseAll": "Collapse all"
+  "redirectedTo": "已转到 {{to}}（原为 {{from}}）"
 }

package/locales/zh-CN/cron.json

@@ -76,6 +76,7 @@
   "hostNoYsk": "尚未安装或无 YSK 项目",
   "pressInstall": "有已登记但未写入系统的任务 — 请点「安装到系统」。",
   "jobsTab": "工作 ({{count}})",
+  "jobsTabPending": "工作 ({{count}}) · 待安装 {{pending}}",
   "registeredJobs": "已登记工作 ({{count}})",
   "jobsSub": "管理档项目 · 改动后需「安装到系统」才生效",
   "addJob": "+ 新增工作",
@@ -136,6 +137,8 @@
   "noHostJobs": "此范围没有 crontab 任务",
   "hostPartial": "无法完整读取所有用户 crontab（需要 root）",
   "pendingInstall": "待安装到系统（{{count}}）",
+  "pendingStale": "已 {{days}} 日未写入系统 crontab，不会执行。",
+  "willNotRun": "未写入系统 crontab — 不会执行。",
   "hourRange": "小时必须介于 0–23。",
   "minuteRange": "分钟必须介于 0–59。",
   "hoursCommon": "常用小时",
@@ -148,24 +151,49 @@
   "hostYskYes": "已有面板行",
   "hostYskNo": "尚无面板行",
   "emptyHostCrontab": "用户 {{user}} 尚未有 crontab。",
-  "writtenOnHost": "Written",
-  "registeredJobsChip": "Registered",
-  "registeredVsWritten": "Registered in the panel vs written to host crontab",
-  "installPreviewTitle": "Preview before installing to system crontab",
-  "installPreviewDesc": "This merges the YSK block into the host crontab. Existing non-YSK lines stay.",
-  "installPreviewMerge": "Install writes a YSK Server crontab merge block. It does not replace the whole crontab.",
-  "installPreviewEmpty": "No pending managed jobs — install still refreshes the YSK block.",
-  "editJobTitle": "Edit job",
-  "editJobDesc": "Changes stay in the panel until you install to the system crontab.",
-  "saveJob": "Save (management only)",
-  "panelLines": "Panel lines",
-  "otherLines": "Other lines",
-  "totalLines": "Total",
-  "writtenOnHostHint": "Lines already written to the host crontab",
-  "registeredJobsHint": "Jobs registered in the panel (including pending install)",
-  "pendingInstallCount": "{{n}} pending install",
-  "systemJobBadge": "No project · system user",
-  "willNotRun": "Not written to system crontab — will not run.",
-  "pendingStale": "Not written to system crontab for {{days}} day(s) — it will not run.",
-  "jobsTabPending": "Jobs ({{count}}) · pending {{pending}}"
+  "writtenOnHost": "已写入",
+  "registeredJobsChip": "已登记",
+  "registeredVsWritten": "已在面板登记 vs 已写入主机 crontab",
+  "installPreviewTitle": "安装到系统前预览",
+  "installPreviewDesc": "会把 YSK 区块合并入主机 crontab，不会覆写非 YSK 行。",
+  "installPreviewMerge": "安装会写入 YSK Server crontab merge 区块，不会整份取代 host crontab。",
+  "installPreviewEmpty": "没有待安装工作 — 仍会重新整理 YSK 区块。",
+  "editJobTitle": "编辑工作",
+  "editJobDesc": "变更只写入控制面，须再安装到系统 crontab 才生效。",
+  "saveJob": "储存（仅管理）",
+  "panelLines": "面板行",
+  "otherLines": "非面板行",
+  "totalLines": "合计",
+  "writtenOnHostHint": "已写入主机 crontab 的行",
+  "registeredJobsHint": "已在面板登记的工作（含待安装）",
+  "pendingInstallCount": "{{n}} 项待安装",
+  "systemJobBadge": "未绑专案 · 系统用户",
+  "hostEdit": "修改",
+  "hostEditTitle": "修改主机 crontab 行",
+  "hostEditDesc": "立即写入该用户的线上 crontab。需要 root 与 YSK_EXECUTE=1。其他行不变。",
+  "hostSave": "写入 crontab",
+  "hostSaveTitle": "写入此 crontab 行？",
+  "hostSaveDesc": "Replaces the live line for {{user}}. Type EDIT to confirm.\n\nCurrent:\n{{from}}\n\nNext:\n{{to}}",
+  "hostDisable": "停用",
+  "hostDisableTitle": "停用主机 crontab 行？",
+  "hostDisableDesc": "会把 {{user}} 该行改成注解。请输入 DISABLE 确认。",
+  "hostEnable": "启用",
+  "hostEnableTitle": "启用主机 crontab 行？",
+  "hostEnableDesc": "会移除 {{user}} 该行的注解。请输入 ENABLE 确认。",
+  "hostRunTitle": "试跑此主机指令一次？",
+  "hostRunDesc": "立即以 {{user}} 执行。不会改 crontab。请输入 RUN 确认。",
+  "hostAdopt": "纳入面板",
+  "hostAdoptTitle": "把此主机行纳入面板？",
+  "hostAdoptDesc": "会在线上行加上 # ysk:id 并登记。下一轮安装不会重复。请输入 ADOPT 确认。",
+  "hostDeleteTitle": "移除主机 crontab 行？",
+  "hostDeleteDesc": "会移除 {{user}} 的线上行。请输入该指令确认。",
+  "hostUserLocked": "crontab 拥有者（此处不能搬到其他用户）",
+  "hostLinePreview": "将写入的行",
+  "disabledJob": "已停用",
+  "confirmMismatch": "确认内容必须与指令相同。",
+  "writtenHost": "已写入主机 crontab",
+  "adoptedHost": "已纳入面板",
+  "keepDisabledHint": "此行已停用。储存后仍保持注解。",
+  "currentLine": "现时",
+  "nextLine": "下一行"
 }

package/locales/zh-CN/dashboard.json

@@ -1,4 +1,10 @@
 {
+  "serviceAria": "{{name}}：{{state}}",
+  "sev": {
+    "ok": "成功",
+    "warn": "警告",
+    "bad": "异常"
+  },
   "title": "控制台",
   "health": "健康状态",
   "protection": "保护模式",
@@ -38,12 +44,13 @@
   "readinessCheck": "就绪检查：",
   "prodOk": "可作生产",
   "notFullyReady": "尚未完全就绪",
+  "readinessBlocked": "有 {{n}} 项阻挡",
   "modeScore": "模式 {{mode}} · 分数 {{ready}}/{{total}}",
   "mode": {
     "degraded": "降级",
     "production_capable": "可生产",
-    "normal": "正常",
-    "blocked": "blocked"
+    "blocked": "有阻挡",
+    "normal": "正常"
   },
   "details": "详情",
   "certExpiryTitle": "证书到期：",
@@ -57,6 +64,7 @@
   "applyAuditBadge": "套用 audit · ok {{ok}} · warn {{warn}} · bad {{bad}}",
   "executeBadge": "系统变更 {{state}}",
   "executeLabel": "系统变更",
+  "publicNo2fa": "面板正听全部界面，而你的管理员账号未开 2FA。",
   "go": "前往",
   "open": "打开",
   "noCriticalWarn": "目前无严重／警告通知",
@@ -81,6 +89,7 @@
   "wizardDesc": "创建项目，并可选一并登记 DNS／邮件／数据库草稿（各项需再到对应页套用）",
   "projectName": "项目名称",
   "projectNameHint": "控制台显示名称；会生成对应目录",
+  "nameRequired": "请输入专案名称",
   "domainOptional": "域名（可留空）",
   "domainHint": "填写后才可勾选 DNS 与邮件",
   "runtime": "运行环境",
@@ -93,6 +102,7 @@
   "serverIpv6": "服务器 IPv6（可选）",
   "serverIpv6Hint": "有则写 AAAA／ip6:",
   "serverIpv6Ph": "公网 IPv6（可留空）",
+  "needDomainFirst": "请先填域名",
   "withDns": "一并创建 DNS 区域",
   "withDnsDesc": "需填写域名；仅登记，需到 DNS 页写入区域文件",
   "withMail": "一并登记邮件域名",
@@ -119,15 +129,5 @@
   "notifSearch": "搜索通知",
   "notifAll": "全部",
   "notifDismiss": "隐藏",
-  "goFix": "前往处理",
-  "needDomainFirst": "请先填域名",
-  "serviceAria": "{{name}}: {{state}}",
-  "sev": {
-    "ok": "OK",
-    "warn": "Warning",
-    "bad": "Problem"
-  },
-  "publicNo2fa": "This panel listens on all interfaces and your admin account has no 2FA.",
-  "readinessBlocked": "{{n}} blocker(s)",
-  "nameRequired": "Enter a project name"
+  "goFix": "前往处理"
 }