@bloomengine/engine 0.3.3 → 0.4.1

package/native/third_party/JoltPhysics/Jolt/Geometry/ClipPoly.h

@@ -1,200 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Geometry/AABox.h>
-
-JPH_NAMESPACE_BEGIN
-
-/// Clip inPolygonToClip against the positive halfspace of plane defined by inPlaneOrigin and inPlaneNormal.
-/// inPlaneNormal does not need to be normalized.
-template <class VERTEX_ARRAY>
-void ClipPolyVsPlane(const VERTEX_ARRAY &inPolygonToClip, Vec3Arg inPlaneOrigin, Vec3Arg inPlaneNormal, VERTEX_ARRAY &outClippedPolygon)
-{
-	JPH_ASSERT(inPolygonToClip.size() >= 2);
-	JPH_ASSERT(outClippedPolygon.empty());
-
-	// Determine state of last point
-	Vec3 e1 = inPolygonToClip[inPolygonToClip.size() - 1];
-	float prev_num = (inPlaneOrigin - e1).Dot(inPlaneNormal);
-	bool prev_inside = prev_num < 0.0f;
-
-	// Loop through all vertices
-	for (typename VERTEX_ARRAY::size_type j = 0; j < inPolygonToClip.size(); ++j)
-	{
-		// Check if second point is inside
-		Vec3Arg e2 = inPolygonToClip[j];
-		float num = (inPlaneOrigin - e2).Dot(inPlaneNormal);
-		bool cur_inside = num < 0.0f;
-
-		// In -> Out or Out -> In: Add point on clipping plane
-		if (cur_inside != prev_inside)
-		{
-			// Solve: (X - inPlaneOrigin) . inPlaneNormal = 0 and X = e1 + t * (e2 - e1) for X
-			Vec3 e12 = e2 - e1;
-			float denom = e12.Dot(inPlaneNormal);
-			if (denom != 0.0f)
-				outClippedPolygon.push_back(e1 + (prev_num / denom) * e12);
-			else
-				cur_inside = prev_inside; // Edge is parallel to plane, treat point as if it were on the same side as the last point
-		}
-
-		// Point inside, add it
-		if (cur_inside)
-			outClippedPolygon.push_back(e2);
-
-		// Update previous state
-		prev_num = num;
-		prev_inside = cur_inside;
-		e1 = e2;
-	}
-}
-
-/// Clip polygon versus polygon.
-/// Both polygons are assumed to be in counter clockwise order.
-/// @param inClippingPolygonNormal is used to create planes of all edges in inClippingPolygon against which inPolygonToClip is clipped, inClippingPolygonNormal does not need to be normalized
-/// @param inClippingPolygon is the polygon which inClippedPolygon is clipped against
-/// @param inPolygonToClip is the polygon that is clipped
-/// @param outClippedPolygon will contain clipped polygon when function returns
-template <class VERTEX_ARRAY>
-void ClipPolyVsPoly(const VERTEX_ARRAY &inPolygonToClip, const VERTEX_ARRAY &inClippingPolygon, Vec3Arg inClippingPolygonNormal, VERTEX_ARRAY &outClippedPolygon)
-{
-	JPH_ASSERT(inPolygonToClip.size() >= 2);
-	JPH_ASSERT(inClippingPolygon.size() >= 3);
-
-	VERTEX_ARRAY tmp_vertices[2];
-	int tmp_vertices_idx = 0;
-
-	for (typename VERTEX_ARRAY::size_type i = 0; i < inClippingPolygon.size(); ++i)
-	{
-		// Get edge to clip against
-		Vec3 clip_e1 = inClippingPolygon[i];
-		Vec3 clip_e2 = inClippingPolygon[(i + 1) % inClippingPolygon.size()];
-		Vec3 clip_normal = inClippingPolygonNormal.Cross(clip_e2 - clip_e1); // Pointing inward to the clipping polygon
-
-		// Get source and target polygon
-		const VERTEX_ARRAY &src_polygon = (i == 0)? inPolygonToClip : tmp_vertices[tmp_vertices_idx];
-		tmp_vertices_idx ^= 1;
-		VERTEX_ARRAY &tgt_polygon = (i == inClippingPolygon.size() - 1)? outClippedPolygon : tmp_vertices[tmp_vertices_idx];
-		tgt_polygon.clear();
-
-		// Clip against the edge
-		ClipPolyVsPlane(src_polygon, clip_e1, clip_normal, tgt_polygon);
-
-		// Break out if no polygon left
-		if (tgt_polygon.size() < 3)
-		{
-			outClippedPolygon.clear();
-			break;
-		}
-	}
-}
-
-/// Clip inPolygonToClip against an edge, the edge is projected on inPolygonToClip using inClippingEdgeNormal.
-/// The positive half space (the side on the edge in the direction of inClippingEdgeNormal) is cut away.
-template <class VERTEX_ARRAY>
-void ClipPolyVsEdge(const VERTEX_ARRAY &inPolygonToClip, Vec3Arg inEdgeVertex1, Vec3Arg inEdgeVertex2, Vec3Arg inClippingEdgeNormal, VERTEX_ARRAY &outClippedPolygon)
-{
-	JPH_ASSERT(inPolygonToClip.size() >= 3);
-	JPH_ASSERT(outClippedPolygon.empty());
-
-	// Get normal that is perpendicular to the edge and the clipping edge normal
-	Vec3 edge = inEdgeVertex2 - inEdgeVertex1;
-	Vec3 edge_normal = inClippingEdgeNormal.Cross(edge);
-
-	// Project vertices of edge on inPolygonToClip
-	Vec3 polygon_normal = (inPolygonToClip[2] - inPolygonToClip[0]).Cross(inPolygonToClip[1] - inPolygonToClip[0]);
-	float polygon_normal_len_sq = polygon_normal.LengthSq();
-	Vec3 v1 = inEdgeVertex1 + polygon_normal.Dot(inPolygonToClip[0] - inEdgeVertex1) * polygon_normal / polygon_normal_len_sq;
-	Vec3 v2 = inEdgeVertex2 + polygon_normal.Dot(inPolygonToClip[0] - inEdgeVertex2) * polygon_normal / polygon_normal_len_sq;
-	Vec3 v12 = v2 - v1;
-	float v12_len_sq = v12.LengthSq();
-
-	// Determine state of last point
-	Vec3 e1 = inPolygonToClip[inPolygonToClip.size() - 1];
-	float prev_num = (inEdgeVertex1 - e1).Dot(edge_normal);
-	bool prev_inside = prev_num < 0.0f;
-
-	// Loop through all vertices
-	for (typename VERTEX_ARRAY::size_type j = 0; j < inPolygonToClip.size(); ++j)
-	{
-		// Check if second point is inside
-		Vec3 e2 = inPolygonToClip[j];
-		float num = (inEdgeVertex1 - e2).Dot(edge_normal);
-		bool cur_inside = num < 0.0f;
-
-		// In -> Out or Out -> In: Add point on clipping plane
-		if (cur_inside != prev_inside)
-		{
-			// Solve: (inEdgeVertex1 - X) . edge_normal = 0 and X = e1 + t * (e2 - e1) for X
-			Vec3 e12 = e2 - e1;
-			float denom = e12.Dot(edge_normal);
-			Vec3 clipped_point = denom != 0.0f? e1 + (prev_num / denom) * e12 : e1;
-
-			// Project point on line segment v1, v2 so see if it falls outside if the edge
-			float projection = (clipped_point - v1).Dot(v12);
-			if (projection < 0.0f)
-				outClippedPolygon.push_back(v1);
-			else if (projection > v12_len_sq)
-				outClippedPolygon.push_back(v2);
-			else
-				outClippedPolygon.push_back(clipped_point);
-		}
-
-		// Update previous state
-		prev_num = num;
-		prev_inside = cur_inside;
-		e1 = e2;
-	}
-}
-
-/// Clip polygon vs axis aligned box, inPolygonToClip is assume to be in counter clockwise order.
-/// Output will be stored in outClippedPolygon. Everything inside inAABox will be kept.
-template <class VERTEX_ARRAY>
-void ClipPolyVsAABox(const VERTEX_ARRAY &inPolygonToClip, const AABox &inAABox, VERTEX_ARRAY &outClippedPolygon)
-{
-	JPH_ASSERT(inPolygonToClip.size() >= 2);
-
-	VERTEX_ARRAY tmp_vertices[2];
-	int tmp_vertices_idx = 0;
-
-	for (int coord = 0; coord < 3; ++coord)
-		for (int side = 0; side < 2; ++side)
-		{
-			// Get plane to clip against
-			Vec3 origin = Vec3::sZero(), normal = Vec3::sZero();
-			if (side == 0)
-			{
-				normal.SetComponent(coord, 1.0f);
-				origin.SetComponent(coord, inAABox.mMin[coord]);
-			}
-			else
-			{
-				normal.SetComponent(coord, -1.0f);
-				origin.SetComponent(coord, inAABox.mMax[coord]);
-			}
-
-			// Get source and target polygon
-			const VERTEX_ARRAY &src_polygon = tmp_vertices_idx == 0? inPolygonToClip : tmp_vertices[tmp_vertices_idx & 1];
-			tmp_vertices_idx++;
-			VERTEX_ARRAY &tgt_polygon = tmp_vertices_idx == 6? outClippedPolygon : tmp_vertices[tmp_vertices_idx & 1];
-			tgt_polygon.clear();
-
-			// Clip against the edge
-			ClipPolyVsPlane(src_polygon, origin, normal, tgt_polygon);
-
-			// Break out if no polygon left
-			if (tgt_polygon.size() < 3)
-			{
-				outClippedPolygon.clear();
-				return;
-			}
-
-			// Flip normal
-			normal = -normal;
-		}
-}
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/Geometry/ClosestPoint.h

@@ -1,498 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-JPH_NAMESPACE_BEGIN
-
-// Turn off fused multiply add instruction because it makes the equations of the form a * b - c * d inaccurate below
-JPH_PRECISE_MATH_ON
-
-/// Helper utils to find the closest point to a line segment, triangle or tetrahedron
-namespace ClosestPoint
-{
-	/// Compute barycentric coordinates of closest point to origin for infinite line defined by (inA, inB)
-	/// Point can then be computed as inA * outU + inB * outV
-	/// Returns false if the points inA, inB do not form a line (are at the same point)
-	inline bool GetBaryCentricCoordinates(Vec3Arg inA, Vec3Arg inB, float &outU, float &outV)
-	{
-		Vec3 ab = inB - inA;
-		float denominator = ab.LengthSq();
-		if (denominator < Square(FLT_EPSILON))
-		{
-			// Degenerate line segment, fallback to points
-			if (inA.LengthSq() < inB.LengthSq())
-			{
-				// A closest
-				outU = 1.0f;
-				outV = 0.0f;
-			}
-			else
-			{
-				// B closest
-				outU = 0.0f;
-				outV = 1.0f;
-			}
-			return false;
-		}
-		else
-		{
-			outV = -inA.Dot(ab) / denominator;
-			outU = 1.0f - outV;
-		}
-		return true;
-	}
-
-	/// Compute barycentric coordinates of closest point to origin for plane defined by (inA, inB, inC)
-	/// Point can then be computed as inA * outU + inB * outV + inC * outW
-	/// Returns false if the points inA, inB, inC do not form a plane (are on the same line or at the same point)
-	inline bool GetBaryCentricCoordinates(Vec3Arg inA, Vec3Arg inB, Vec3Arg inC, float &outU, float &outV, float &outW)
-	{
-		// Taken from: Real-Time Collision Detection - Christer Ericson (Section: Barycentric Coordinates)
-		// With p = 0
-		// Adjusted to always include the shortest edge of the triangle in the calculation to improve numerical accuracy
-
-		// First calculate the three edges
-		Vec3 v0 = inB - inA;
-		Vec3 v1 = inC - inA;
-		Vec3 v2 = inC - inB;
-
-		// Make sure that the shortest edge is included in the calculation to keep the products a * b - c * d as small as possible to preserve accuracy
-		float d00 = v0.LengthSq();
-		float d11 = v1.LengthSq();
-		float d22 = v2.LengthSq();
-		if (d00 <= d22)
-		{
-			// Use v0 and v1 to calculate barycentric coordinates
-			float d01 = v0.Dot(v1);
-
-			// Denominator must be positive:
-			// |v0|^2 * |v1|^2 - (v0 . v1)^2 = |v0|^2 * |v1|^2 * (1 - cos(angle)^2) >= 0
-			float denominator = d00 * d11 - d01 * d01;
-			if (denominator < 1.0e-12f)
-			{
-				// Degenerate triangle, return coordinates along longest edge
-				if (d00 > d11)
-				{
-					GetBaryCentricCoordinates(inA, inB, outU, outV);
-					outW = 0.0f;
-				}
-				else
-				{
-					GetBaryCentricCoordinates(inA, inC, outU, outW);
-					outV = 0.0f;
-				}
-				return false;
-			}
-			else
-			{
-				float a0 = inA.Dot(v0);
-				float a1 = inA.Dot(v1);
-				outV = (d01 * a1 - d11 * a0) / denominator;
-				outW = (d01 * a0 - d00 * a1) / denominator;
-				outU = 1.0f - outV - outW;
-			}
-		}
-		else
-		{
-			// Use v1 and v2 to calculate barycentric coordinates
-			float d12 = v1.Dot(v2);
-
-			float denominator = d11 * d22 - d12 * d12;
-			if (denominator < 1.0e-12f)
-			{
-				// Degenerate triangle, return coordinates along longest edge
-				if (d11 > d22)
-				{
-					GetBaryCentricCoordinates(inA, inC, outU, outW);
-					outV = 0.0f;
-				}
-				else
-				{
-					GetBaryCentricCoordinates(inB, inC, outV, outW);
-					outU = 0.0f;
-				}
-				return false;
-			}
-			else
-			{
-				float c1 = inC.Dot(v1);
-				float c2 = inC.Dot(v2);
-				outU = (d22 * c1 - d12 * c2) / denominator;
-				outV = (d11 * c2 - d12 * c1) / denominator;
-				outW = 1.0f - outU - outV;
-			}
-		}
-		return true;
-	}
-
-	/// Get the closest point to the origin of line (inA, inB)
-	/// outSet describes which features are closest: 1 = a, 2 = b, 3 = line segment ab
-	inline Vec3	GetClosestPointOnLine(Vec3Arg inA, Vec3Arg inB, uint32 &outSet)
-	{
-		float u, v;
-		GetBaryCentricCoordinates(inA, inB, u, v);
-		if (v <= 0.0f)
-		{
-			// inA is closest point
-			outSet = 0b0001;
-			return inA;
-		}
-		else if (u <= 0.0f)
-		{
-			// inB is closest point
-			outSet = 0b0010;
-			return inB;
-		}
-		else
-		{
-			// Closest point lies on line inA inB
-			outSet = 0b0011;
-			return u * inA + v * inB;
-		}
-	}
-
-	/// Get the closest point to the origin of triangle (inA, inB, inC)
-	/// outSet describes which features are closest: 1 = a, 2 = b, 4 = c, 5 = line segment ac, 7 = triangle interior etc.
-	/// If MustIncludeC is true, the function assumes that C is part of the closest feature (vertex, edge, face) and does less work, if the assumption is not true then a closest point to the other features is returned.
-	template <bool MustIncludeC = false>
-	inline Vec3	GetClosestPointOnTriangle(Vec3Arg inA, Vec3Arg inB, Vec3Arg inC, uint32 &outSet)
-	{
-		// Taken from: Real-Time Collision Detection - Christer Ericson (Section: Closest Point on Triangle to Point)
-		// With p = 0
-
-		// The most accurate normal is calculated by using the two shortest edges
-		// See: https://box2d.org/posts/2014/01/troublesome-triangle/
-		// The difference in normals is most pronounced when one edge is much smaller than the others (in which case the other 2 must have roughly the same length).
-		// Therefore we can suffice by just picking the shortest from 2 edges and use that with the 3rd edge to calculate the normal.
-		// We first check which of the edges is shorter and if bc is shorter than ac then we swap a with c to a is always on the shortest edge
-		UVec4 swap_ac;
-		{
-			Vec3 ac = inC - inA;
-			Vec3 bc = inC - inB;
-			swap_ac = Vec4::sLess(bc.DotV4(bc), ac.DotV4(ac));
-		}
-		Vec3 a = Vec3::sSelect(inA, inC, swap_ac);
-		Vec3 c = Vec3::sSelect(inC, inA, swap_ac);
-
-		// Calculate normal
-		Vec3 ab = inB - a;
-		Vec3 ac = c - a;
-		Vec3 n = ab.Cross(ac);
-		float n_len_sq = n.LengthSq();
-
-		// Check degenerate
-		if (n_len_sq < 1.0e-10f) // Square(FLT_EPSILON) was too small and caused numerical problems, see test case TestCollideParallelTriangleVsCapsule
-		{
-			// Degenerate, fallback to vertices and edges
-
-			// Start with vertex C being the closest
-			uint32 closest_set = 0b0100;
-			Vec3 closest_point = inC;
-			float best_dist_sq = inC.LengthSq();
-
-			// If the closest point must include C then A or B cannot be closest
-			// Note that we test vertices first because we want to prefer a closest vertex over a closest edge (this results in an outSet with fewer bits set)
-			if constexpr (!MustIncludeC)
-			{
-				// Try vertex A
-				float a_len_sq = inA.LengthSq();
-				if (a_len_sq < best_dist_sq)
-				{
-					closest_set = 0b0001;
-					closest_point = inA;
-					best_dist_sq = a_len_sq;
-				}
-
-				// Try vertex B
-				float b_len_sq = inB.LengthSq();
-				if (b_len_sq < best_dist_sq)
-				{
-					closest_set = 0b0010;
-					closest_point = inB;
-					best_dist_sq = b_len_sq;
-				}
-			}
-
-			// Edge AC
-			float ac_len_sq = ac.LengthSq();
-			if (ac_len_sq > Square(FLT_EPSILON))
-			{
-				float v = Clamp(-a.Dot(ac) / ac_len_sq, 0.0f, 1.0f);
-				Vec3 q = a + v * ac;
-				float dist_sq = q.LengthSq();
-				if (dist_sq < best_dist_sq)
-				{
-					closest_set = 0b0101;
-					closest_point = q;
-					best_dist_sq = dist_sq;
-				}
-			}
-
-			// Edge BC
-			Vec3 bc = inC - inB;
-			float bc_len_sq = bc.LengthSq();
-			if (bc_len_sq > Square(FLT_EPSILON))
-			{
-				float v = Clamp(-inB.Dot(bc) / bc_len_sq, 0.0f, 1.0f);
-				Vec3 q = inB + v * bc;
-				float dist_sq = q.LengthSq();
-				if (dist_sq < best_dist_sq)
-				{
-					closest_set = 0b0110;
-					closest_point = q;
-					best_dist_sq = dist_sq;
-				}
-			}
-
-			// If the closest point must include C then AB cannot be closest
-			if constexpr (!MustIncludeC)
-			{
-				// Edge AB
-				ab = inB - inA;
-				float ab_len_sq = ab.LengthSq();
-				if (ab_len_sq > Square(FLT_EPSILON))
-				{
-					float v = Clamp(-inA.Dot(ab) / ab_len_sq, 0.0f, 1.0f);
-					Vec3 q = inA + v * ab;
-					float dist_sq = q.LengthSq();
-					if (dist_sq < best_dist_sq)
-					{
-						closest_set = 0b0011;
-						closest_point = q;
-						best_dist_sq = dist_sq;
-					}
-				}
-			}
-
-			outSet = closest_set;
-			return closest_point;
-		}
-
-		// Check if P in vertex region outside A
-		Vec3 ap = -a;
-		float d1 = ab.Dot(ap);
-		float d2 = ac.Dot(ap);
-		if (d1 <= 0.0f && d2 <= 0.0f)
-		{
-			outSet = swap_ac.GetX()? 0b0100 : 0b0001;
-			return a; // barycentric coordinates (1,0,0)
-		}
-
-		// Check if P in vertex region outside B
-		Vec3 bp = -inB;
-		float d3 = ab.Dot(bp);
-		float d4 = ac.Dot(bp);
-		if (d3 >= 0.0f && d4 <= d3)
-		{
-			outSet = 0b0010;
-			return inB; // barycentric coordinates (0,1,0)
-		}
-
-		// Check if P in edge region of AB, if so return projection of P onto AB
-		if (d1 * d4 <= d3 * d2 && d1 >= 0.0f && d3 <= 0.0f)
-		{
-			float v = d1 / (d1 - d3);
-			outSet = swap_ac.GetX()? 0b0110 : 0b0011;
-			return a + v * ab; // barycentric coordinates (1-v,v,0)
-		}
-
-		// Check if P in vertex region outside C
-		Vec3 cp = -c;
-		float d5 = ab.Dot(cp);
-		float d6 = ac.Dot(cp);
-		if (d6 >= 0.0f && d5 <= d6)
-		{
-			outSet = swap_ac.GetX()? 0b0001 : 0b0100;
-			return c; // barycentric coordinates (0,0,1)
-		}
-
-		// Check if P in edge region of AC, if so return projection of P onto AC
-		if (d5 * d2 <= d1 * d6 && d2 >= 0.0f && d6 <= 0.0f)
-		{
-			float w = d2 / (d2 - d6);
-			outSet = 0b0101;
-			return a + w * ac; // barycentric coordinates (1-w,0,w)
-		}
-
-		// Check if P in edge region of BC, if so return projection of P onto BC
-		float d4_d3 = d4 - d3;
-		float d5_d6 = d5 - d6;
-		if (d3 * d6 <= d5 * d4 && d4_d3 >= 0.0f && d5_d6 >= 0.0f)
-		{
-			float w = d4_d3 / (d4_d3 + d5_d6);
-			outSet = swap_ac.GetX()? 0b0011 : 0b0110;
-			return inB + w * (c - inB); // barycentric coordinates (0,1-w,w)
-		}
-
-		// P inside face region.
-		// Here we deviate from Christer Ericson's article to improve accuracy.
-		// Determine distance between triangle and origin: distance = (centroid - origin) . normal / |normal|
-		// Closest point to origin is then: distance . normal / |normal|
-		// Note that this way of calculating the closest point is much more accurate than first calculating barycentric coordinates
-		// and then calculating the closest point based on those coordinates.
-		outSet = 0b0111;
-		return n * (a + inB + c).Dot(n) / (3.0f * n_len_sq);
-	}
-
-	/// Check if the origin is outside the plane of triangle (inA, inB, inC). inD specifies the front side of the plane.
-	inline bool OriginOutsideOfPlane(Vec3Arg inA, Vec3Arg inB, Vec3Arg inC, Vec3Arg inD)
-	{
-		// Taken from: Real-Time Collision Detection - Christer Ericson (Section: Closest Point on Tetrahedron to Point)
-		// With p = 0
-
-		// Test if point p and d lie on opposite sides of plane through abc
-		Vec3 n = (inB - inA).Cross(inC - inA);
-		float signp = inA.Dot(n); // [AP AB AC]
-		float signd = (inD - inA).Dot(n); // [AD AB AC]
-
-		// Points on opposite sides if expression signs are the same
-		// Note that we left out the minus sign in signp so we need to check > 0 instead of < 0 as in Christer's book
-		// We compare against a small negative value to allow for a little bit of slop in the calculations
-		return signp * signd > -FLT_EPSILON;
-	}
-
-	/// Returns for each of the planes of the tetrahedron if the origin is inside it
-	/// Roughly equivalent to:
-	///	[OriginOutsideOfPlane(inA, inB, inC, inD),
-	///	 OriginOutsideOfPlane(inA, inC, inD, inB),
-	///	 OriginOutsideOfPlane(inA, inD, inB, inC),
-	///	 OriginOutsideOfPlane(inB, inD, inC, inA)]
-	inline UVec4 OriginOutsideOfTetrahedronPlanes(Vec3Arg inA, Vec3Arg inB, Vec3Arg inC, Vec3Arg inD)
-	{
-		Vec3 ab = inB - inA;
-		Vec3 ac = inC - inA;
-		Vec3 ad = inD - inA;
-		Vec3 bd = inD - inB;
-		Vec3 bc = inC - inB;
-
-		Vec3 ab_cross_ac = ab.Cross(ac);
-		Vec3 ac_cross_ad = ac.Cross(ad);
-		Vec3 ad_cross_ab = ad.Cross(ab);
-		Vec3 bd_cross_bc = bd.Cross(bc);
-
-		// For each plane get the side on which the origin is
-		float signp0 = inA.Dot(ab_cross_ac); // ABC
-		float signp1 = inA.Dot(ac_cross_ad); // ACD
-		float signp2 = inA.Dot(ad_cross_ab); // ADB
-		float signp3 = inB.Dot(bd_cross_bc); // BDC
-		Vec4 signp(signp0, signp1, signp2, signp3);
-
-		// For each plane get the side that is outside (determined by the 4th point)
-		float signd0 = ad.Dot(ab_cross_ac);  // D
-		float signd1 = ab.Dot(ac_cross_ad);  // B
-		float signd2 = ac.Dot(ad_cross_ab);  // C
-		float signd3 = -ab.Dot(bd_cross_bc); // A
-		Vec4 signd(signd0, signd1, signd2, signd3);
-
-		// The winding of all triangles has been chosen so that signd should have the
-		// same sign for all components. If this is not the case the tetrahedron
-		// is degenerate and we return that the origin is in front of all sides
-		int sign_bits = signd.GetSignBits();
-		switch (sign_bits)
-		{
-		case 0:
-			// All positive
-			return Vec4::sGreaterOrEqual(signp, Vec4::sReplicate(-FLT_EPSILON));
-
-		case 0xf:
-			// All negative
-			return Vec4::sLessOrEqual(signp, Vec4::sReplicate(FLT_EPSILON));
-
-		default:
-			// Mixed signs, degenerate tetrahedron
-			return UVec4::sReplicate(0xffffffff);
-		}
-	}
-
-	/// Get the closest point between tetrahedron (inA, inB, inC, inD) to the origin
-	/// outSet specifies which feature was closest, 1 = a, 2 = b, 4 = c, 8 = d. Edges have 2 bits set, triangles 3 and if the point is in the interior 4 bits are set.
-	/// If MustIncludeD is true, the function assumes that D is part of the closest feature (vertex, edge, face, tetrahedron) and does less work, if the assumption is not true then a closest point to the other features is returned.
-	template <bool MustIncludeD = false>
-	inline Vec3	GetClosestPointOnTetrahedron(Vec3Arg inA, Vec3Arg inB, Vec3Arg inC, Vec3Arg inD, uint32 &outSet)
-	{
-		// Taken from: Real-Time Collision Detection - Christer Ericson (Section: Closest Point on Tetrahedron to Point)
-		// With p = 0
-
-		// Start out assuming point inside all halfspaces, so closest to itself
-		uint32 closest_set = 0b1111;
-		Vec3 closest_point = Vec3::sZero();
-		float best_dist_sq = FLT_MAX;
-
-		// Determine for each of the faces of the tetrahedron if the origin is in front of the plane
-		UVec4 origin_out_of_planes = OriginOutsideOfTetrahedronPlanes(inA, inB, inC, inD);
-
-		// If point outside face abc then compute closest point on abc
-		if (origin_out_of_planes.GetX()) // OriginOutsideOfPlane(inA, inB, inC, inD)
-		{
-			if constexpr (MustIncludeD)
-			{
-				// If the closest point must include D then ABC cannot be closest but the closest point
-				// cannot be an interior point either so we return A as closest point
-				closest_set = 0b0001;
-				closest_point = inA;
-			}
-			else
-			{
-				// Test the face normally
-				closest_point = GetClosestPointOnTriangle<false>(inA, inB, inC, closest_set);
-			}
-			best_dist_sq = closest_point.LengthSq();
-		}
-
-		// Repeat test for face acd
-		if (origin_out_of_planes.GetY()) // OriginOutsideOfPlane(inA, inC, inD, inB)
-		{
-			uint32 set;
-			Vec3 q = GetClosestPointOnTriangle<MustIncludeD>(inA, inC, inD, set);
-			float dist_sq = q.LengthSq();
-			if (dist_sq < best_dist_sq)
-			{
-				best_dist_sq = dist_sq;
-				closest_point = q;
-				closest_set = (set & 0b0001) + ((set & 0b0110) << 1);
-			}
-		}
-
-		// Repeat test for face adb
-		if (origin_out_of_planes.GetZ()) // OriginOutsideOfPlane(inA, inD, inB, inC)
-		{
-			// Keep original vertex order, it doesn't matter if the triangle is facing inward or outward
-			// and it improves consistency for GJK which will always add a new vertex D and keep the closest
-			// feature from the previous iteration in ABC
-			uint32 set;
-			Vec3 q = GetClosestPointOnTriangle<MustIncludeD>(inA, inB, inD, set);
-			float dist_sq = q.LengthSq();
-			if (dist_sq < best_dist_sq)
-			{
-				best_dist_sq = dist_sq;
-				closest_point = q;
-				closest_set = (set & 0b0011) + ((set & 0b0100) << 1);
-			}
-		}
-
-		// Repeat test for face bdc
-		if (origin_out_of_planes.GetW()) // OriginOutsideOfPlane(inB, inD, inC, inA)
-		{
-			// Keep original vertex order, it doesn't matter if the triangle is facing inward or outward
-			// and it improves consistency for GJK which will always add a new vertex D and keep the closest
-			// feature from the previous iteration in ABC
-			uint32 set;
-			Vec3 q = GetClosestPointOnTriangle<MustIncludeD>(inB, inC, inD, set);
-			float dist_sq = q.LengthSq();
-			if (dist_sq < best_dist_sq)
-			{
-				closest_point = q;
-				closest_set = set << 1;
-			}
-		}
-
-		outSet = closest_set;
-		return closest_point;
-	}
-};
-
-JPH_PRECISE_MATH_OFF
-
-JPH_NAMESPACE_END