wasmtime 9.0.4 → 10.0.1

data/ext/cargo-vendor/cranelift-wasm-0.96.4/src/environ/spec.rs

@@ -1,807 +0,0 @@
-//! All the runtime support necessary for the wasm to cranelift translation is formalized by the
-//! traits `FunctionEnvironment` and `ModuleEnvironment`.
-//!
-//! There are skeleton implementations of these traits in the `dummy` module, and complete
-//! implementations in [Wasmtime].
-//!
-//! [Wasmtime]: https://github.com/bytecodealliance/wasmtime
-
-use crate::state::FuncTranslationState;
-use crate::{
-    DataIndex, ElemIndex, FuncIndex, Global, GlobalIndex, Heap, HeapData, Memory, MemoryIndex,
-    SignatureIndex, Table, TableIndex, Tag, TagIndex, TypeIndex, WasmError, WasmFuncType,
-    WasmResult, WasmType,
-};
-use core::convert::From;
-use cranelift_codegen::cursor::FuncCursor;
-use cranelift_codegen::ir::immediates::Offset32;
-use cranelift_codegen::ir::{self, InstBuilder};
-use cranelift_codegen::isa::TargetFrontendConfig;
-use cranelift_entity::PrimaryMap;
-use cranelift_frontend::FunctionBuilder;
-use std::boxed::Box;
-use std::string::ToString;
-use wasmparser::{FuncValidator, FunctionBody, Operator, ValidatorResources, WasmFeatures};
-
-/// The value of a WebAssembly global variable.
-#[derive(Clone, Copy)]
-pub enum GlobalVariable {
-    /// This is a constant global with a value known at compile time.
-    Const(ir::Value),
-
-    /// This is a variable in memory that should be referenced through a `GlobalValue`.
-    Memory {
-        /// The address of the global variable storage.
-        gv: ir::GlobalValue,
-        /// An offset to add to the address.
-        offset: Offset32,
-        /// The global variable's type.
-        ty: ir::Type,
-    },
-
-    /// This is a global variable that needs to be handled by the environment.
-    Custom,
-}
-
-/// Environment affecting the translation of a WebAssembly.
-pub trait TargetEnvironment {
-    /// Get the information needed to produce Cranelift IR for the given target.
-    fn target_config(&self) -> TargetFrontendConfig;
-
-    /// Whether to enable Spectre mitigations for heap accesses.
-    fn heap_access_spectre_mitigation(&self) -> bool;
-
-    /// Get the Cranelift integer type to use for native pointers.
-    ///
-    /// This returns `I64` for 64-bit architectures and `I32` for 32-bit architectures.
-    fn pointer_type(&self) -> ir::Type {
-        ir::Type::int(u16::from(self.target_config().pointer_bits())).unwrap()
-    }
-
-    /// Get the size of a native pointer, in bytes.
-    fn pointer_bytes(&self) -> u8 {
-        self.target_config().pointer_bytes()
-    }
-
-    /// Get the Cranelift reference type to use for the given Wasm reference
-    /// type.
-    ///
-    /// By default, this returns `R64` for 64-bit architectures and `R32` for
-    /// 32-bit architectures. If you override this, then you should also
-    /// override `FuncEnvironment::{translate_ref_null, translate_ref_is_null}`
-    /// as well.
-    fn reference_type(&self, ty: WasmType) -> ir::Type {
-        let _ = ty;
-        match self.pointer_type() {
-            ir::types::I32 => ir::types::R32,
-            ir::types::I64 => ir::types::R64,
-            _ => panic!("unsupported pointer type"),
-        }
-    }
-}
-
-/// Environment affecting the translation of a single WebAssembly function.
-///
-/// A `FuncEnvironment` trait object is required to translate a WebAssembly function to Cranelift
-/// IR. The function environment provides information about the WebAssembly module as well as the
-/// runtime environment.
-pub trait FuncEnvironment: TargetEnvironment {
-    /// Is the given parameter of the given function a wasm-level parameter, as opposed to a hidden
-    /// parameter added for use by the implementation?
-    fn is_wasm_parameter(&self, signature: &ir::Signature, index: usize) -> bool {
-        signature.params[index].purpose == ir::ArgumentPurpose::Normal
-    }
-
-    /// Is the given return of the given function a wasm-level parameter, as
-    /// opposed to a hidden parameter added for use by the implementation?
-    fn is_wasm_return(&self, signature: &ir::Signature, index: usize) -> bool {
-        signature.returns[index].purpose == ir::ArgumentPurpose::Normal
-    }
-
-    /// Called after the locals for a function have been parsed, and the number
-    /// of variables defined by this function is provided.
-    fn after_locals(&mut self, num_locals_defined: usize) {
-        drop(num_locals_defined);
-    }
-
-    /// Set up the necessary preamble definitions in `func` to access the global variable
-    /// identified by `index`.
-    ///
-    /// The index space covers both imported globals and globals defined by the module.
-    ///
-    /// Return the global variable reference that should be used to access the global and the
-    /// WebAssembly type of the global.
-    fn make_global(
-        &mut self,
-        func: &mut ir::Function,
-        index: GlobalIndex,
-    ) -> WasmResult<GlobalVariable>;
-
-    /// Get the heaps for this function environment.
-    ///
-    /// The returned map should provide heap format details (encoded in
-    /// `HeapData`) for each `Heap` that was previously returned by
-    /// `make_heap()`. The translator will first call make_heap for each Wasm
-    /// memory, and then later when translating code, will invoke `heaps()` to
-    /// learn how to access the environment's implementation of each memory.
-    fn heaps(&self) -> &PrimaryMap<Heap, HeapData>;
-
-    /// Set up the necessary preamble definitions in `func` to access the linear memory identified
-    /// by `index`.
-    ///
-    /// The index space covers both imported and locally declared memories.
-    fn make_heap(&mut self, func: &mut ir::Function, index: MemoryIndex) -> WasmResult<Heap>;
-
-    /// Set up the necessary preamble definitions in `func` to access the table identified
-    /// by `index`.
-    ///
-    /// The index space covers both imported and locally declared tables.
-    fn make_table(&mut self, func: &mut ir::Function, index: TableIndex) -> WasmResult<ir::Table>;
-
-    /// Set up a signature definition in the preamble of `func` that can be used for an indirect
-    /// call with signature `index`.
-    ///
-    /// The signature may contain additional arguments needed for an indirect call, but the
-    /// arguments marked as `ArgumentPurpose::Normal` must correspond to the WebAssembly signature
-    /// arguments.
-    ///
-    /// The signature will only be used for indirect calls, even if the module has direct function
-    /// calls with the same WebAssembly type.
-    fn make_indirect_sig(
-        &mut self,
-        func: &mut ir::Function,
-        index: TypeIndex,
-    ) -> WasmResult<ir::SigRef>;
-
-    /// Set up an external function definition in the preamble of `func` that can be used to
-    /// directly call the function `index`.
-    ///
-    /// The index space covers both imported functions and functions defined in the current module.
-    ///
-    /// The function's signature may contain additional arguments needed for a direct call, but the
-    /// arguments marked as `ArgumentPurpose::Normal` must correspond to the WebAssembly signature
-    /// arguments.
-    ///
-    /// The function's signature will only be used for direct calls, even if the module has
-    /// indirect calls with the same WebAssembly type.
-    fn make_direct_func(
-        &mut self,
-        func: &mut ir::Function,
-        index: FuncIndex,
-    ) -> WasmResult<ir::FuncRef>;
-
-    /// Translate a `call_indirect` WebAssembly instruction at `pos`.
-    ///
-    /// Insert instructions at `pos` for an indirect call to the function `callee` in the table
-    /// `table_index` with WebAssembly signature `sig_index`. The `callee` value will have type
-    /// `i32`.
-    ///
-    /// The signature `sig_ref` was previously created by `make_indirect_sig()`.
-    ///
-    /// Return the call instruction whose results are the WebAssembly return values.
-    #[allow(clippy::too_many_arguments)]
-    fn translate_call_indirect(
-        &mut self,
-        builder: &mut FunctionBuilder,
-        table_index: TableIndex,
-        table: ir::Table,
-        sig_index: TypeIndex,
-        sig_ref: ir::SigRef,
-        callee: ir::Value,
-        call_args: &[ir::Value],
-    ) -> WasmResult<ir::Inst>;
-
-    /// Translate a `call` WebAssembly instruction at `pos`.
-    ///
-    /// Insert instructions at `pos` for a direct call to the function `callee_index`.
-    ///
-    /// The function reference `callee` was previously created by `make_direct_func()`.
-    ///
-    /// Return the call instruction whose results are the WebAssembly return values.
-    fn translate_call(
-        &mut self,
-        mut pos: FuncCursor,
-        _callee_index: FuncIndex,
-        callee: ir::FuncRef,
-        call_args: &[ir::Value],
-    ) -> WasmResult<ir::Inst> {
-        Ok(pos.ins().call(callee, call_args))
-    }
-
-    /// Translate a `memory.grow` WebAssembly instruction.
-    ///
-    /// The `index` provided identifies the linear memory to grow, and `heap` is the heap reference
-    /// returned by `make_heap` for the same index.
-    ///
-    /// The `val` value is the requested memory size in pages.
-    ///
-    /// Returns the old size (in pages) of the memory.
-    fn translate_memory_grow(
-        &mut self,
-        pos: FuncCursor,
-        index: MemoryIndex,
-        heap: Heap,
-        val: ir::Value,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translates a `memory.size` WebAssembly instruction.
-    ///
-    /// The `index` provided identifies the linear memory to query, and `heap` is the heap reference
-    /// returned by `make_heap` for the same index.
-    ///
-    /// Returns the size in pages of the memory.
-    fn translate_memory_size(
-        &mut self,
-        pos: FuncCursor,
-        index: MemoryIndex,
-        heap: Heap,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate a `memory.copy` WebAssembly instruction.
-    ///
-    /// The `index` provided identifies the linear memory to query, and `heap` is the heap reference
-    /// returned by `make_heap` for the same index.
-    fn translate_memory_copy(
-        &mut self,
-        pos: FuncCursor,
-        src_index: MemoryIndex,
-        src_heap: Heap,
-        dst_index: MemoryIndex,
-        dst_heap: Heap,
-        dst: ir::Value,
-        src: ir::Value,
-        len: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `memory.fill` WebAssembly instruction.
-    ///
-    /// The `index` provided identifies the linear memory to query, and `heap` is the heap reference
-    /// returned by `make_heap` for the same index.
-    fn translate_memory_fill(
-        &mut self,
-        pos: FuncCursor,
-        index: MemoryIndex,
-        heap: Heap,
-        dst: ir::Value,
-        val: ir::Value,
-        len: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `memory.init` WebAssembly instruction.
-    ///
-    /// The `index` provided identifies the linear memory to query, and `heap` is the heap reference
-    /// returned by `make_heap` for the same index. `seg_index` is the index of the segment to copy
-    /// from.
-    #[allow(clippy::too_many_arguments)]
-    fn translate_memory_init(
-        &mut self,
-        pos: FuncCursor,
-        index: MemoryIndex,
-        heap: Heap,
-        seg_index: u32,
-        dst: ir::Value,
-        src: ir::Value,
-        len: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `data.drop` WebAssembly instruction.
-    fn translate_data_drop(&mut self, pos: FuncCursor, seg_index: u32) -> WasmResult<()>;
-
-    /// Translate a `table.size` WebAssembly instruction.
-    fn translate_table_size(
-        &mut self,
-        pos: FuncCursor,
-        index: TableIndex,
-        table: ir::Table,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate a `table.grow` WebAssembly instruction.
-    fn translate_table_grow(
-        &mut self,
-        pos: FuncCursor,
-        table_index: TableIndex,
-        table: ir::Table,
-        delta: ir::Value,
-        init_value: ir::Value,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate a `table.get` WebAssembly instruction.
-    fn translate_table_get(
-        &mut self,
-        builder: &mut FunctionBuilder,
-        table_index: TableIndex,
-        table: ir::Table,
-        index: ir::Value,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate a `table.set` WebAssembly instruction.
-    fn translate_table_set(
-        &mut self,
-        builder: &mut FunctionBuilder,
-        table_index: TableIndex,
-        table: ir::Table,
-        value: ir::Value,
-        index: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `table.copy` WebAssembly instruction.
-    #[allow(clippy::too_many_arguments)]
-    fn translate_table_copy(
-        &mut self,
-        pos: FuncCursor,
-        dst_table_index: TableIndex,
-        dst_table: ir::Table,
-        src_table_index: TableIndex,
-        src_table: ir::Table,
-        dst: ir::Value,
-        src: ir::Value,
-        len: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `table.fill` WebAssembly instruction.
-    fn translate_table_fill(
-        &mut self,
-        pos: FuncCursor,
-        table_index: TableIndex,
-        dst: ir::Value,
-        val: ir::Value,
-        len: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `table.init` WebAssembly instruction.
-    #[allow(clippy::too_many_arguments)]
-    fn translate_table_init(
-        &mut self,
-        pos: FuncCursor,
-        seg_index: u32,
-        table_index: TableIndex,
-        table: ir::Table,
-        dst: ir::Value,
-        src: ir::Value,
-        len: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate a `elem.drop` WebAssembly instruction.
-    fn translate_elem_drop(&mut self, pos: FuncCursor, seg_index: u32) -> WasmResult<()>;
-
-    /// Translate a `ref.null T` WebAssembly instruction.
-    ///
-    /// By default, translates into a null reference type.
-    ///
-    /// Override this if you don't use Cranelift reference types for all Wasm
-    /// reference types (e.g. you use a raw pointer for `funcref`s) or if the
-    /// null sentinel is not a null reference type pointer for your type. If you
-    /// override this method, then you should also override
-    /// `translate_ref_is_null` as well.
-    fn translate_ref_null(&mut self, mut pos: FuncCursor, ty: WasmType) -> WasmResult<ir::Value> {
-        let _ = ty;
-        Ok(pos.ins().null(self.reference_type(ty)))
-    }
-
-    /// Translate a `ref.is_null` WebAssembly instruction.
-    ///
-    /// By default, assumes that `value` is a Cranelift reference type, and that
-    /// a null Cranelift reference type is the null value for all Wasm reference
-    /// types.
-    ///
-    /// If you override this method, you probably also want to override
-    /// `translate_ref_null` as well.
-    fn translate_ref_is_null(
-        &mut self,
-        mut pos: FuncCursor,
-        value: ir::Value,
-    ) -> WasmResult<ir::Value> {
-        let is_null = pos.ins().is_null(value);
-        Ok(pos.ins().uextend(ir::types::I32, is_null))
-    }
-
-    /// Translate a `ref.func` WebAssembly instruction.
-    fn translate_ref_func(
-        &mut self,
-        pos: FuncCursor,
-        func_index: FuncIndex,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate a `global.get` WebAssembly instruction at `pos` for a global
-    /// that is custom.
-    fn translate_custom_global_get(
-        &mut self,
-        pos: FuncCursor,
-        global_index: GlobalIndex,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate a `global.set` WebAssembly instruction at `pos` for a global
-    /// that is custom.
-    fn translate_custom_global_set(
-        &mut self,
-        pos: FuncCursor,
-        global_index: GlobalIndex,
-        val: ir::Value,
-    ) -> WasmResult<()>;
-
-    /// Translate an `i32.atomic.wait` or `i64.atomic.wait` WebAssembly instruction.
-    /// The `index` provided identifies the linear memory containing the value
-    /// to wait on, and `heap` is the heap reference returned by `make_heap`
-    /// for the same index.  Whether the waited-on value is 32- or 64-bit can be
-    /// determined by examining the type of `expected`, which must be only I32 or I64.
-    ///
-    /// Note that the `addr` here is the host linear memory address rather
-    /// than a relative wasm linear memory address. The type of this value is
-    /// the same as the host's pointer.
-    ///
-    /// Returns an i32, which is negative if the helper call failed.
-    fn translate_atomic_wait(
-        &mut self,
-        pos: FuncCursor,
-        index: MemoryIndex,
-        heap: Heap,
-        addr: ir::Value,
-        expected: ir::Value,
-        timeout: ir::Value,
-    ) -> WasmResult<ir::Value>;
-
-    /// Translate an `atomic.notify` WebAssembly instruction.
-    /// The `index` provided identifies the linear memory containing the value
-    /// to wait on, and `heap` is the heap reference returned by `make_heap`
-    /// for the same index.
-    ///
-    /// Note that the `addr` here is the host linear memory address rather
-    /// than a relative wasm linear memory address. The type of this value is
-    /// the same as the host's pointer.
-    ///
-    /// Returns an i64, which is negative if the helper call failed.
-    fn translate_atomic_notify(
-        &mut self,
-        pos: FuncCursor,
-        index: MemoryIndex,
-        heap: Heap,
-        addr: ir::Value,
-        count: ir::Value,
-    ) -> WasmResult<ir::Value>;
-
-    /// Emit code at the beginning of every wasm loop.
-    ///
-    /// This can be used to insert explicit interrupt or safepoint checking at
-    /// the beginnings of loops.
-    fn translate_loop_header(&mut self, _builder: &mut FunctionBuilder) -> WasmResult<()> {
-        // By default, don't emit anything.
-        Ok(())
-    }
-
-    /// Optional callback for the `FunctionEnvironment` performing this translation to maintain
-    /// internal state or prepare custom state for the operator to translate
-    fn before_translate_operator(
-        &mut self,
-        _op: &Operator,
-        _builder: &mut FunctionBuilder,
-        _state: &FuncTranslationState,
-    ) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Optional callback for the `FunctionEnvironment` performing this translation to maintain
-    /// internal state or finalize custom state for the operator that was translated
-    fn after_translate_operator(
-        &mut self,
-        _op: &Operator,
-        _builder: &mut FunctionBuilder,
-        _state: &FuncTranslationState,
-    ) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Optional callback for the `FuncEnvironment` performing this translation
-    /// to maintain, prepare, or finalize custom, internal state when we
-    /// statically determine that a Wasm memory access will unconditionally
-    /// trap, rendering the rest of the block unreachable. Called just before
-    /// the unconditional trap is emitted.
-    fn before_unconditionally_trapping_memory_access(
-        &mut self,
-        _builder: &mut FunctionBuilder,
-    ) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Optional callback for the `FunctionEnvironment` performing this translation to perform work
-    /// before the function body is translated.
-    fn before_translate_function(
-        &mut self,
-        _builder: &mut FunctionBuilder,
-        _state: &FuncTranslationState,
-    ) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Optional callback for the `FunctionEnvironment` performing this translation to perform work
-    /// after the function body is translated.
-    fn after_translate_function(
-        &mut self,
-        _builder: &mut FunctionBuilder,
-        _state: &FuncTranslationState,
-    ) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Whether or not to force relaxed simd instructions to have deterministic
-    /// lowerings meaning they will produce the same results across all hosts,
-    /// regardless of the cost to performance.
-    fn relaxed_simd_deterministic(&self) -> bool {
-        true
-    }
-
-    /// Whether or not the target being translated for has a native fma
-    /// instruction. If it does not then when relaxed simd isn't deterministic
-    /// the translation of the `f32x4.relaxed_fma` instruction, for example,
-    /// will do a multiplication and then an add instead of the fused version.
-    fn has_native_fma(&self) -> bool {
-        false
-    }
-
-    /// Returns whether this is an x86 target, which may alter lowerings of
-    /// relaxed simd instructions.
-    fn is_x86(&self) -> bool {
-        false
-    }
-}
-
-/// An object satisfying the `ModuleEnvironment` trait can be passed as argument to the
-/// [`translate_module`](fn.translate_module.html) function. These methods should not be called
-/// by the user, they are only for `cranelift-wasm` internal use.
-pub trait ModuleEnvironment<'data> {
-    /// Provides the number of types up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_types(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares a function signature to the environment.
-    fn declare_type_func(&mut self, wasm_func_type: WasmFuncType) -> WasmResult<()>;
-
-    /// Translates a type index to its signature index, only called for type
-    /// indices which point to functions.
-    fn type_to_signature(&self, index: TypeIndex) -> WasmResult<SignatureIndex> {
-        drop(index);
-        Err(WasmError::Unsupported("module linking".to_string()))
-    }
-
-    /// Provides the number of imports up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_imports(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares a function import to the environment.
-    fn declare_func_import(
-        &mut self,
-        index: TypeIndex,
-        module: &'data str,
-        field: &'data str,
-    ) -> WasmResult<()>;
-
-    /// Declares a table import to the environment.
-    fn declare_table_import(
-        &mut self,
-        table: Table,
-        module: &'data str,
-        field: &'data str,
-    ) -> WasmResult<()>;
-
-    /// Declares a memory import to the environment.
-    fn declare_memory_import(
-        &mut self,
-        memory: Memory,
-        module: &'data str,
-        field: &'data str,
-    ) -> WasmResult<()>;
-
-    /// Declares an tag import to the environment.
-    fn declare_tag_import(
-        &mut self,
-        tag: Tag,
-        module: &'data str,
-        field: &'data str,
-    ) -> WasmResult<()> {
-        drop((tag, module, field));
-        Err(WasmError::Unsupported("wasm tags".to_string()))
-    }
-
-    /// Declares a global import to the environment.
-    fn declare_global_import(
-        &mut self,
-        global: Global,
-        module: &'data str,
-        field: &'data str,
-    ) -> WasmResult<()>;
-
-    /// Notifies the implementation that all imports have been declared.
-    fn finish_imports(&mut self) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Provides the number of defined functions up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_func_types(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares the type (signature) of a local function in the module.
-    fn declare_func_type(&mut self, index: TypeIndex) -> WasmResult<()>;
-
-    /// Provides the number of defined tables up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_tables(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares a table to the environment.
-    fn declare_table(&mut self, table: Table) -> WasmResult<()>;
-
-    /// Provides the number of defined memories up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_memories(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares a memory to the environment
-    fn declare_memory(&mut self, memory: Memory) -> WasmResult<()>;
-
-    /// Provides the number of defined tags up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_tags(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares an tag to the environment
-    fn declare_tag(&mut self, tag: Tag) -> WasmResult<()> {
-        drop(tag);
-        Err(WasmError::Unsupported("wasm tags".to_string()))
-    }
-
-    /// Provides the number of defined globals up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_globals(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares a global to the environment.
-    fn declare_global(&mut self, global: Global) -> WasmResult<()>;
-
-    /// Provides the number of exports up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_exports(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares a function export to the environment.
-    fn declare_func_export(&mut self, func_index: FuncIndex, name: &'data str) -> WasmResult<()>;
-
-    /// Declares a table export to the environment.
-    fn declare_table_export(&mut self, table_index: TableIndex, name: &'data str)
-        -> WasmResult<()>;
-
-    /// Declares a memory export to the environment.
-    fn declare_memory_export(
-        &mut self,
-        memory_index: MemoryIndex,
-        name: &'data str,
-    ) -> WasmResult<()>;
-
-    /// Declares an tag export to the environment.
-    fn declare_tag_export(&mut self, tag_index: TagIndex, name: &'data str) -> WasmResult<()> {
-        drop((tag_index, name));
-        Err(WasmError::Unsupported("wasm tags".to_string()))
-    }
-
-    /// Declares a global export to the environment.
-    fn declare_global_export(
-        &mut self,
-        global_index: GlobalIndex,
-        name: &'data str,
-    ) -> WasmResult<()>;
-
-    /// Notifies the implementation that all exports have been declared.
-    fn finish_exports(&mut self) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Declares the optional start function.
-    fn declare_start_func(&mut self, index: FuncIndex) -> WasmResult<()>;
-
-    /// Provides the number of element initializers up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_table_elements(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Fills a declared table with references to functions in the module.
-    fn declare_table_elements(
-        &mut self,
-        table_index: TableIndex,
-        base: Option<GlobalIndex>,
-        offset: u32,
-        elements: Box<[FuncIndex]>,
-    ) -> WasmResult<()>;
-
-    /// Declare a passive element segment.
-    fn declare_passive_element(
-        &mut self,
-        index: ElemIndex,
-        elements: Box<[FuncIndex]>,
-    ) -> WasmResult<()>;
-
-    /// Indicates that a declarative element segment was seen in the wasm
-    /// module.
-    fn declare_elements(&mut self, elements: Box<[FuncIndex]>) -> WasmResult<()> {
-        drop(elements);
-        Ok(())
-    }
-
-    /// Provides the number of passive data segments up front.
-    ///
-    /// By default this does nothing, but implementations may use this to
-    /// pre-allocate memory if desired.
-    fn reserve_passive_data(&mut self, count: u32) -> WasmResult<()> {
-        let _ = count;
-        Ok(())
-    }
-
-    /// Declare a passive data segment.
-    fn declare_passive_data(&mut self, data_index: DataIndex, data: &'data [u8]) -> WasmResult<()>;
-
-    /// Indicates how many functions the code section reports and the byte
-    /// offset of where the code sections starts.
-    fn reserve_function_bodies(&mut self, bodies: u32, code_section_offset: u64) {
-        drop((bodies, code_section_offset));
-    }
-
-    /// Provides the contents of a function body.
-    fn define_function_body(
-        &mut self,
-        validator: FuncValidator<ValidatorResources>,
-        body: FunctionBody<'data>,
-    ) -> WasmResult<()>;
-
-    /// Provides the number of data initializers up front. By default this does nothing, but
-    /// implementations can use this to preallocate memory if desired.
-    fn reserve_data_initializers(&mut self, _num: u32) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Fills a declared memory with bytes at module instantiation.
-    fn declare_data_initialization(
-        &mut self,
-        memory_index: MemoryIndex,
-        base: Option<GlobalIndex>,
-        offset: u64,
-        data: &'data [u8],
-    ) -> WasmResult<()>;
-
-    /// Declares the name of a module to the environment.
-    ///
-    /// By default this does nothing, but implementations can use this to read
-    /// the module name subsection of the custom name section if desired.
-    fn declare_module_name(&mut self, _name: &'data str) {}
-
-    /// Declares the name of a function to the environment.
-    ///
-    /// By default this does nothing, but implementations can use this to read
-    /// the function name subsection of the custom name section if desired.
-    fn declare_func_name(&mut self, _func_index: FuncIndex, _name: &'data str) {}
-
-    /// Declares the name of a function's local to the environment.
-    ///
-    /// By default this does nothing, but implementations can use this to read
-    /// the local name subsection of the custom name section if desired.
-    fn declare_local_name(&mut self, _func_index: FuncIndex, _local_index: u32, _name: &'data str) {
-    }
-
-    /// Indicates that a custom section has been found in the wasm file
-    fn custom_section(&mut self, _name: &'data str, _data: &'data [u8]) -> WasmResult<()> {
-        Ok(())
-    }
-
-    /// Returns the list of enabled wasm features this translation will be using.
-    fn wasm_features(&self) -> WasmFeatures {
-        WasmFeatures::default()
-    }
-}