wasmtime 9.0.4 → 10.0.1

data/ext/cargo-vendor/wasmtime-10.0.1/src/config.rs

@@ -0,0 +1,2066 @@
+use crate::memory::MemoryCreator;
+use crate::trampoline::MemoryCreatorProxy;
+use anyhow::{bail, Result};
+use serde::{Deserialize, Serialize};
+use std::collections::{HashMap, HashSet};
+use std::fmt;
+#[cfg(any(feature = "cache", feature = "cranelift", feature = "winch"))]
+use std::path::Path;
+use std::str::FromStr;
+use std::sync::Arc;
+use target_lexicon::Architecture;
+use wasmparser::WasmFeatures;
+#[cfg(feature = "cache")]
+use wasmtime_cache::CacheConfig;
+use wasmtime_environ::Tunables;
+use wasmtime_jit::profiling::{self, ProfilingAgent};
+use wasmtime_runtime::{InstanceAllocator, OnDemandInstanceAllocator, RuntimeMemoryCreator};
+
+pub use wasmtime_environ::CacheStore;
+
+/// Represents the module instance allocation strategy to use.
+#[derive(Clone)]
+pub enum InstanceAllocationStrategy {
+    /// The on-demand instance allocation strategy.
+    ///
+    /// Resources related to a module instance are allocated at instantiation time and
+    /// immediately deallocated when the `Store` referencing the instance is dropped.
+    ///
+    /// This is the default allocation strategy for Wasmtime.
+    OnDemand,
+    /// The pooling instance allocation strategy.
+    ///
+    /// A pool of resources is created in advance and module instantiation reuses resources
+    /// from the pool. Resources are returned to the pool when the `Store` referencing the instance
+    /// is dropped.
+    #[cfg(feature = "pooling-allocator")]
+    Pooling(PoolingAllocationConfig),
+}
+
+impl InstanceAllocationStrategy {
+    /// The default pooling instance allocation strategy.
+    #[cfg(feature = "pooling-allocator")]
+    pub fn pooling() -> Self {
+        Self::Pooling(Default::default())
+    }
+}
+
+impl Default for InstanceAllocationStrategy {
+    fn default() -> Self {
+        Self::OnDemand
+    }
+}
+
+#[derive(Clone)]
+/// Configure the strategy used for versioning in serializing and deserializing [`crate::Module`].
+pub enum ModuleVersionStrategy {
+    /// Use the wasmtime crate's Cargo package version.
+    WasmtimeVersion,
+    /// Use a custom version string. Must be at most 255 bytes.
+    Custom(String),
+    /// Emit no version string in serialization, and accept all version strings in deserialization.
+    None,
+}
+
+impl Default for ModuleVersionStrategy {
+    fn default() -> Self {
+        ModuleVersionStrategy::WasmtimeVersion
+    }
+}
+
+impl std::hash::Hash for ModuleVersionStrategy {
+    fn hash<H: std::hash::Hasher>(&self, hasher: &mut H) {
+        match self {
+            Self::WasmtimeVersion => env!("CARGO_PKG_VERSION").hash(hasher),
+            Self::Custom(s) => s.hash(hasher),
+            Self::None => {}
+        };
+    }
+}
+
+/// Global configuration options used to create an [`Engine`](crate::Engine)
+/// and customize its behavior.
+///
+/// This structure exposed a builder-like interface and is primarily consumed by
+/// [`Engine::new()`](crate::Engine::new).
+///
+/// The validation of `Config` is deferred until the engine is being built, thus
+/// a problematic config may cause `Engine::new` to fail.
+#[derive(Clone)]
+pub struct Config {
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    compiler_config: CompilerConfig,
+    profiling_strategy: ProfilingStrategy,
+
+    pub(crate) tunables: Tunables,
+    #[cfg(feature = "cache")]
+    pub(crate) cache_config: CacheConfig,
+    pub(crate) mem_creator: Option<Arc<dyn RuntimeMemoryCreator>>,
+    pub(crate) allocation_strategy: InstanceAllocationStrategy,
+    pub(crate) max_wasm_stack: usize,
+    pub(crate) features: WasmFeatures,
+    pub(crate) wasm_backtrace: bool,
+    pub(crate) wasm_backtrace_details_env_used: bool,
+    pub(crate) native_unwind_info: bool,
+    #[cfg(feature = "async")]
+    pub(crate) async_stack_size: usize,
+    pub(crate) async_support: bool,
+    pub(crate) module_version: ModuleVersionStrategy,
+    pub(crate) parallel_compilation: bool,
+    pub(crate) memory_init_cow: bool,
+    pub(crate) memory_guaranteed_dense_image_size: u64,
+    pub(crate) force_memory_init_memfd: bool,
+}
+
+/// User-provided configuration for the compiler.
+#[cfg(any(feature = "cranelift", feature = "winch"))]
+#[derive(Debug, Clone)]
+struct CompilerConfig {
+    strategy: Strategy,
+    target: Option<target_lexicon::Triple>,
+    settings: HashMap<String, String>,
+    flags: HashSet<String>,
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    cache_store: Option<Arc<dyn CacheStore>>,
+    clif_dir: Option<std::path::PathBuf>,
+}
+
+#[cfg(any(feature = "cranelift", feature = "winch"))]
+impl CompilerConfig {
+    fn new(strategy: Strategy) -> Self {
+        Self {
+            strategy,
+            target: None,
+            settings: HashMap::new(),
+            flags: HashSet::new(),
+            cache_store: None,
+            clif_dir: None,
+        }
+    }
+
+    /// Ensures that the key is not set or equals to the given value.
+    /// If the key is not set, it will be set to the given value.
+    ///
+    /// # Returns
+    ///
+    /// Returns true if successfully set or already had the given setting
+    /// value, or false if the setting was explicitly set to something
+    /// else previously.
+    fn ensure_setting_unset_or_given(&mut self, k: &str, v: &str) -> bool {
+        if let Some(value) = self.settings.get(k) {
+            if value != v {
+                return false;
+            }
+        } else {
+            self.settings.insert(k.to_string(), v.to_string());
+        }
+        true
+    }
+}
+
+#[cfg(any(feature = "cranelift", feature = "winch"))]
+impl Default for CompilerConfig {
+    fn default() -> Self {
+        Self::new(Strategy::Auto)
+    }
+}
+
+impl Config {
+    /// Creates a new configuration object with the default configuration
+    /// specified.
+    pub fn new() -> Self {
+        let mut ret = Self {
+            tunables: Tunables::default(),
+            #[cfg(any(feature = "cranelift", feature = "winch"))]
+            compiler_config: CompilerConfig::default(),
+            #[cfg(feature = "cache")]
+            cache_config: CacheConfig::new_cache_disabled(),
+            profiling_strategy: ProfilingStrategy::None,
+            mem_creator: None,
+            allocation_strategy: InstanceAllocationStrategy::OnDemand,
+            // 512k of stack -- note that this is chosen currently to not be too
+            // big, not be too small, and be a good default for most platforms.
+            // One platform of particular note is Windows where the stack size
+            // of the main thread seems to, by default, be smaller than that of
+            // Linux and macOS. This 512k value at least lets our current test
+            // suite pass on the main thread of Windows (using `--test-threads
+            // 1` forces this), or at least it passed when this change was
+            // committed.
+            max_wasm_stack: 512 * 1024,
+            wasm_backtrace: true,
+            wasm_backtrace_details_env_used: false,
+            native_unwind_info: true,
+            features: WasmFeatures::default(),
+            #[cfg(feature = "async")]
+            async_stack_size: 2 << 20,
+            async_support: false,
+            module_version: ModuleVersionStrategy::default(),
+            parallel_compilation: !cfg!(miri),
+            memory_init_cow: true,
+            memory_guaranteed_dense_image_size: 16 << 20,
+            force_memory_init_memfd: false,
+        };
+        #[cfg(any(feature = "cranelift", feature = "winch"))]
+        {
+            ret.cranelift_debug_verifier(false);
+            ret.cranelift_opt_level(OptLevel::Speed);
+        }
+
+        ret.wasm_reference_types(true);
+        ret.wasm_multi_value(true);
+        ret.wasm_bulk_memory(true);
+        ret.wasm_simd(true);
+        ret.wasm_backtrace_details(WasmBacktraceDetails::Environment);
+
+        // This is on-by-default in `wasmparser` since it's a stage 4+ proposal
+        // but it's not implemented in Wasmtime yet so disable it.
+        ret.features.tail_call = false;
+
+        ret
+    }
+
+    /// Sets the target triple for the [`Config`].
+    ///
+    /// By default, the host target triple is used for the [`Config`].
+    ///
+    /// This method can be used to change the target triple.
+    ///
+    /// Cranelift flags will not be inferred for the given target and any
+    /// existing target-specific Cranelift flags will be cleared.
+    ///
+    /// # Errors
+    ///
+    /// This method will error if the given target triple is not supported.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn target(&mut self, target: &str) -> Result<&mut Self> {
+        self.compiler_config.target =
+            Some(target_lexicon::Triple::from_str(target).map_err(|e| anyhow::anyhow!(e))?);
+
+        Ok(self)
+    }
+
+    /// Enables the incremental compilation cache in Cranelift, using the provided `CacheStore`
+    /// backend for storage.
+    #[cfg(all(feature = "incremental-cache", feature = "cranelift"))]
+    pub fn enable_incremental_compilation(
+        &mut self,
+        cache_store: Arc<dyn CacheStore>,
+    ) -> Result<&mut Self> {
+        self.compiler_config.cache_store = Some(cache_store);
+        Ok(self)
+    }
+
+    /// Whether or not to enable support for asynchronous functions in Wasmtime.
+    ///
+    /// When enabled, the config can optionally define host functions with `async`.
+    /// Instances created and functions called with this `Config` *must* be called
+    /// through their asynchronous APIs, however. For example using
+    /// [`Func::call`](crate::Func::call) will panic when used with this config.
+    ///
+    /// # Asynchronous Wasm
+    ///
+    /// WebAssembly does not currently have a way to specify at the bytecode
+    /// level what is and isn't async. Host-defined functions, however, may be
+    /// defined as `async`. WebAssembly imports always appear synchronous, which
+    /// gives rise to a bit of an impedance mismatch here. To solve this
+    /// Wasmtime supports "asynchronous configs" which enables calling these
+    /// asynchronous functions in a way that looks synchronous to the executing
+    /// WebAssembly code.
+    ///
+    /// An asynchronous config must always invoke wasm code asynchronously,
+    /// meaning we'll always represent its computation as a
+    /// [`Future`](std::future::Future). The `poll` method of the futures
+    /// returned by Wasmtime will perform the actual work of calling the
+    /// WebAssembly. Wasmtime won't manage its own thread pools or similar,
+    /// that's left up to the embedder.
+    ///
+    /// To implement futures in a way that WebAssembly sees asynchronous host
+    /// functions as synchronous, all async Wasmtime futures will execute on a
+    /// separately allocated native stack from the thread otherwise executing
+    /// Wasmtime. This separate native stack can then be switched to and from.
+    /// Using this whenever an `async` host function returns a future that
+    /// resolves to `Pending` we switch away from the temporary stack back to
+    /// the main stack and propagate the `Pending` status.
+    ///
+    /// In general it's encouraged that the integration with `async` and
+    /// wasmtime is designed early on in your embedding of Wasmtime to ensure
+    /// that it's planned that WebAssembly executes in the right context of your
+    /// application.
+    ///
+    /// # Execution in `poll`
+    ///
+    /// The [`Future::poll`](std::future::Future::poll) method is the main
+    /// driving force behind Rust's futures. That method's own documentation
+    /// states "an implementation of `poll` should strive to return quickly, and
+    /// should not block". This, however, can be at odds with executing
+    /// WebAssembly code as part of the `poll` method itself. If your
+    /// WebAssembly is untrusted then this could allow the `poll` method to take
+    /// arbitrarily long in the worst case, likely blocking all other
+    /// asynchronous tasks.
+    ///
+    /// To remedy this situation you have a a few possible ways to solve this:
+    ///
+    /// * The most efficient solution is to enable
+    ///   [`Config::epoch_interruption`] in conjunction with
+    ///   [`crate::Store::epoch_deadline_async_yield_and_update`]. Coupled with
+    ///   periodic calls to [`crate::Engine::increment_epoch`] this will cause
+    ///   executing WebAssembly to periodically yield back according to the
+    ///   epoch configuration settings. This enables `Future::poll` to take at
+    ///   most a certain amount of time according to epoch configuration
+    ///   settings and when increments happen. The benefit of this approach is
+    ///   that the instrumentation in compiled code is quite lightweight, but a
+    ///   downside can be that the scheduling is somewhat nondeterministic since
+    ///   increments are usually timer-based which are not always deterministic.
+    ///
+    ///   Note that to prevent infinite execution of wasm it's recommended to
+    ///   place a timeout on the entire future representing executing wasm code
+    ///   and the periodic yields with epochs should ensure that when the
+    ///   timeout is reached it's appropriately recognized.
+    ///
+    /// * Alternatively you can enable the
+    ///   [`Config::consume_fuel`](crate::Config::consume_fuel) method as well
+    ///   as [`crate::Store::out_of_fuel_async_yield`] When doing so this will
+    ///   configure Wasmtime futures to yield periodically while they're
+    ///   executing WebAssembly code. After consuming the specified amount of
+    ///   fuel wasm futures will return `Poll::Pending` from their `poll`
+    ///   method, and will get automatically re-polled later. This enables the
+    ///   `Future::poll` method to take roughly a fixed amount of time since
+    ///   fuel is guaranteed to get consumed while wasm is executing. Unlike
+    ///   epoch-based preemption this is deterministic since wasm always
+    ///   consumes a fixed amount of fuel per-operation. The downside of this
+    ///   approach, however, is that the compiled code instrumentation is
+    ///   significantly more expensive than epoch checks.
+    ///
+    ///   Note that to prevent infinite execution of wasm it's recommended to
+    ///   place a timeout on the entire future representing executing wasm code
+    ///   and the periodic yields with epochs should ensure that when the
+    ///   timeout is reached it's appropriately recognized.
+    ///
+    /// In all cases special care needs to be taken when integrating
+    /// asynchronous wasm into your application. You should carefully plan where
+    /// WebAssembly will execute and what compute resources will be allotted to
+    /// it. If Wasmtime doesn't support exactly what you'd like just yet, please
+    /// feel free to open an issue!
+    #[cfg(feature = "async")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
+    pub fn async_support(&mut self, enable: bool) -> &mut Self {
+        self.async_support = enable;
+        self
+    }
+
+    /// Configures whether DWARF debug information will be emitted during
+    /// compilation.
+    ///
+    /// By default this option is `false`.
+    pub fn debug_info(&mut self, enable: bool) -> &mut Self {
+        self.tunables.generate_native_debuginfo = enable;
+        self
+    }
+
+    /// Configures whether [`WasmBacktrace`] will be present in the context of
+    /// errors returned from Wasmtime.
+    ///
+    /// A backtrace may be collected whenever an error is returned from a host
+    /// function call through to WebAssembly or when WebAssembly itself hits a
+    /// trap condition, such as an out-of-bounds memory access. This flag
+    /// indicates, in these conditions, whether the backtrace is collected or
+    /// not.
+    ///
+    /// Currently wasm backtraces are implemented through frame pointer walking.
+    /// This means that collecting a backtrace is expected to be a fast and
+    /// relatively cheap operation. Additionally backtrace collection is
+    /// suitable in concurrent environments since one thread capturing a
+    /// backtrace won't block other threads.
+    ///
+    /// Collected backtraces are attached via [`anyhow::Error::context`] to
+    /// errors returned from host functions. The [`WasmBacktrace`] type can be
+    /// acquired via [`anyhow::Error::downcast_ref`] to inspect the backtrace.
+    /// When this option is disabled then this context is never applied to
+    /// errors coming out of wasm.
+    ///
+    /// This option is `true` by default.
+    ///
+    /// [`WasmBacktrace`]: crate::WasmBacktrace
+    pub fn wasm_backtrace(&mut self, enable: bool) -> &mut Self {
+        self.wasm_backtrace = enable;
+        self
+    }
+
+    /// Configures whether backtraces in `Trap` will parse debug info in the wasm file to
+    /// have filename/line number information.
+    ///
+    /// When enabled this will causes modules to retain debugging information
+    /// found in wasm binaries. This debug information will be used when a trap
+    /// happens to symbolicate each stack frame and attempt to print a
+    /// filename/line number for each wasm frame in the stack trace.
+    ///
+    /// By default this option is `WasmBacktraceDetails::Environment`, meaning
+    /// that wasm will read `WASMTIME_BACKTRACE_DETAILS` to indicate whether details
+    /// should be parsed.
+    pub fn wasm_backtrace_details(&mut self, enable: WasmBacktraceDetails) -> &mut Self {
+        self.wasm_backtrace_details_env_used = false;
+        self.tunables.parse_wasm_debuginfo = match enable {
+            WasmBacktraceDetails::Enable => true,
+            WasmBacktraceDetails::Disable => false,
+            WasmBacktraceDetails::Environment => {
+                self.wasm_backtrace_details_env_used = true;
+                std::env::var("WASMTIME_BACKTRACE_DETAILS")
+                    .map(|s| s == "1")
+                    .unwrap_or(false)
+            }
+        };
+        self
+    }
+
+    /// Configures whether to generate native unwind information
+    /// (e.g. `.eh_frame` on Linux).
+    ///
+    /// This configuration option only exists to help third-party stack
+    /// capturing mechanisms, such as the system's unwinder or the `backtrace`
+    /// crate, determine how to unwind through Wasm frames. It does not affect
+    /// whether Wasmtime can capture Wasm backtraces or not. The presence of
+    /// [`WasmBacktrace`] is controlled by the [`Config::wasm_backtrace`]
+    /// option.
+    ///
+    /// Note that native unwind information is always generated when targeting
+    /// Windows, since the Windows ABI requires it.
+    ///
+    /// This option defaults to `true`.
+    ///
+    /// [`WasmBacktrace`]: crate::WasmBacktrace
+    pub fn native_unwind_info(&mut self, enable: bool) -> &mut Self {
+        self.native_unwind_info = enable;
+        self
+    }
+
+    /// Configures whether execution of WebAssembly will "consume fuel" to
+    /// either halt or yield execution as desired.
+    ///
+    /// This can be used to deterministically prevent infinitely-executing
+    /// WebAssembly code by instrumenting generated code to consume fuel as it
+    /// executes. When fuel runs out the behavior is defined by configuration
+    /// within a [`Store`], and by default a trap is raised.
+    ///
+    /// Note that a [`Store`] starts with no fuel, so if you enable this option
+    /// you'll have to be sure to pour some fuel into [`Store`] before
+    /// executing some code.
+    ///
+    /// By default this option is `false`.
+    ///
+    /// [`Store`]: crate::Store
+    pub fn consume_fuel(&mut self, enable: bool) -> &mut Self {
+        self.tunables.consume_fuel = enable;
+        self
+    }
+
+    /// Enables epoch-based interruption.
+    ///
+    /// When executing code in async mode, we sometimes want to
+    /// implement a form of cooperative timeslicing: long-running Wasm
+    /// guest code should periodically yield to the executor
+    /// loop. This yielding could be implemented by using "fuel" (see
+    /// [`consume_fuel`](Config::consume_fuel)). However, fuel
+    /// instrumentation is somewhat expensive: it modifies the
+    /// compiled form of the Wasm code so that it maintains a precise
+    /// instruction count, frequently checking this count against the
+    /// remaining fuel. If one does not need this precise count or
+    /// deterministic interruptions, and only needs a periodic
+    /// interrupt of some form, then It would be better to have a more
+    /// lightweight mechanism.
+    ///
+    /// Epoch-based interruption is that mechanism. There is a global
+    /// "epoch", which is a counter that divides time into arbitrary
+    /// periods (or epochs). This counter lives on the
+    /// [`Engine`](crate::Engine) and can be incremented by calling
+    /// [`Engine::increment_epoch`](crate::Engine::increment_epoch).
+    /// Epoch-based instrumentation works by setting a "deadline
+    /// epoch". The compiled code knows the deadline, and at certain
+    /// points, checks the current epoch against that deadline. It
+    /// will yield if the deadline has been reached.
+    ///
+    /// The idea is that checking an infrequently-changing counter is
+    /// cheaper than counting and frequently storing a precise metric
+    /// (instructions executed) locally. The interruptions are not
+    /// deterministic, but if the embedder increments the epoch in a
+    /// periodic way (say, every regular timer tick by a thread or
+    /// signal handler), then we can ensure that all async code will
+    /// yield to the executor within a bounded time.
+    ///
+    /// The deadline check cannot be avoided by malicious wasm code. It is safe
+    /// to use epoch deadlines to limit the execution time of untrusted
+    /// code.
+    ///
+    /// The [`Store`](crate::Store) tracks the deadline, and controls
+    /// what happens when the deadline is reached during
+    /// execution. Several behaviors are possible:
+    ///
+    /// - Trap if code is executing when the epoch deadline is
+    ///   met. See
+    ///   [`Store::epoch_deadline_trap`](crate::Store::epoch_deadline_trap).
+    ///
+    /// - Call an arbitrary function. This function may chose to trap or
+    ///   increment the epoch. See
+    ///   [`Store::epoch_deadline_callback`](crate::Store::epoch_deadline_callback).
+    ///
+    /// - Yield to the executor loop, then resume when the future is
+    ///   next polled. See
+    ///   [`Store::epoch_deadline_async_yield_and_update`](crate::Store::epoch_deadline_async_yield_and_update).
+    ///
+    /// Trapping is the default. The yielding behaviour may be used for
+    /// the timeslicing behavior described above.
+    ///
+    /// This feature is available with or without async support.
+    /// However, without async support, the timeslicing behaviour is
+    /// not available. This means epoch-based interruption can only
+    /// serve as a simple external-interruption mechanism.
+    ///
+    /// An initial deadline must be set before executing code by calling
+    /// [`Store::set_epoch_deadline`](crate::Store::set_epoch_deadline). If this
+    /// deadline is not configured then wasm will immediately trap.
+    ///
+    /// ## When to use fuel vs. epochs
+    ///
+    /// In general, epoch-based interruption results in faster
+    /// execution. This difference is sometimes significant: in some
+    /// measurements, up to 2-3x. This is because epoch-based
+    /// interruption does less work: it only watches for a global
+    /// rarely-changing counter to increment, rather than keeping a
+    /// local frequently-changing counter and comparing it to a
+    /// deadline.
+    ///
+    /// Fuel, in contrast, should be used when *deterministic*
+    /// yielding or trapping is needed. For example, if it is required
+    /// that the same function call with the same starting state will
+    /// always either complete or trap with an out-of-fuel error,
+    /// deterministically, then fuel with a fixed bound should be
+    /// used.
+    ///
+    /// # See Also
+    ///
+    /// - [`Engine::increment_epoch`](crate::Engine::increment_epoch)
+    /// - [`Store::set_epoch_deadline`](crate::Store::set_epoch_deadline)
+    /// - [`Store::epoch_deadline_trap`](crate::Store::epoch_deadline_trap)
+    /// - [`Store::epoch_deadline_callback`](crate::Store::epoch_deadline_callback)
+    /// - [`Store::epoch_deadline_async_yield_and_update`](crate::Store::epoch_deadline_async_yield_and_update)
+    pub fn epoch_interruption(&mut self, enable: bool) -> &mut Self {
+        self.tunables.epoch_interruption = enable;
+        self
+    }
+
+    /// Configures the maximum amount of stack space available for
+    /// executing WebAssembly code.
+    ///
+    /// WebAssembly has well-defined semantics on stack overflow. This is
+    /// intended to be a knob which can help configure how much stack space
+    /// wasm execution is allowed to consume. Note that the number here is not
+    /// super-precise, but rather wasm will take at most "pretty close to this
+    /// much" stack space.
+    ///
+    /// If a wasm call (or series of nested wasm calls) take more stack space
+    /// than the `size` specified then a stack overflow trap will be raised.
+    ///
+    /// Caveat: this knob only limits the stack space consumed by wasm code.
+    /// More importantly, it does not ensure that this much stack space is
+    /// available on the calling thread stack. Exhausting the thread stack
+    /// typically leads to an **abort** of the process.
+    ///
+    /// Here are some examples of how that could happen:
+    ///
+    /// - Let's assume this option is set to 2 MiB and then a thread that has
+    ///   a stack with 512 KiB left.
+    ///
+    ///   If wasm code consumes more than 512 KiB then the process will be aborted.
+    ///
+    /// - Assuming the same conditions, but this time wasm code does not consume
+    ///   any stack but calls into a host function. The host function consumes
+    ///   more than 512 KiB of stack space. The process will be aborted.
+    ///
+    /// There's another gotcha related to recursive calling into wasm: the stack
+    /// space consumed by a host function is counted towards this limit. The
+    /// host functions are not prevented from consuming more than this limit.
+    /// However, if the host function that used more than this limit and called
+    /// back into wasm, then the execution will trap immediatelly because of
+    /// stack overflow.
+    ///
+    /// When the `async` feature is enabled, this value cannot exceed the
+    /// `async_stack_size` option. Be careful not to set this value too close
+    /// to `async_stack_size` as doing so may limit how much stack space
+    /// is available for host functions.
+    ///
+    /// By default this option is 512 KiB.
+    ///
+    /// # Errors
+    ///
+    /// The `Engine::new` method will fail if the `size` specified here is
+    /// either 0 or larger than the [`Config::async_stack_size`] configuration.
+    pub fn max_wasm_stack(&mut self, size: usize) -> &mut Self {
+        self.max_wasm_stack = size;
+        self
+    }
+
+    /// Configures the size of the stacks used for asynchronous execution.
+    ///
+    /// This setting configures the size of the stacks that are allocated for
+    /// asynchronous execution. The value cannot be less than `max_wasm_stack`.
+    ///
+    /// The amount of stack space guaranteed for host functions is
+    /// `async_stack_size - max_wasm_stack`, so take care not to set these two values
+    /// close to one another; doing so may cause host functions to overflow the
+    /// stack and abort the process.
+    ///
+    /// By default this option is 2 MiB.
+    ///
+    /// # Errors
+    ///
+    /// The `Engine::new` method will fail if the value for this option is
+    /// smaller than the [`Config::max_wasm_stack`] option.
+    #[cfg(feature = "async")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
+    pub fn async_stack_size(&mut self, size: usize) -> &mut Self {
+        self.async_stack_size = size;
+        self
+    }
+
+    /// Configures whether the WebAssembly threads proposal will be enabled for
+    /// compilation.
+    ///
+    /// The [WebAssembly threads proposal][threads] is not currently fully
+    /// standardized and is undergoing development. Additionally the support in
+    /// wasmtime itself is still being worked on. Support for this feature can
+    /// be enabled through this method for appropriate wasm modules.
+    ///
+    /// This feature gates items such as shared memories and atomic
+    /// instructions. Note that the threads feature depends on the
+    /// bulk memory feature, which is enabled by default.
+    ///
+    /// This is `false` by default.
+    ///
+    /// > **Note**: Wasmtime does not implement everything for the wasm threads
+    /// > spec at this time, so bugs, panics, and possibly segfaults should be
+    /// > expected. This should not be enabled in a production setting right
+    /// > now.
+    ///
+    /// # Errors
+    ///
+    /// The validation of this feature are deferred until the engine is being built,
+    /// and thus may cause `Engine::new` fail if the `bulk_memory` feature is disabled.
+    ///
+    /// [threads]: https://github.com/webassembly/threads
+    pub fn wasm_threads(&mut self, enable: bool) -> &mut Self {
+        self.features.threads = enable;
+        self
+    }
+
+    /// Configures whether the [WebAssembly reference types proposal][proposal]
+    /// will be enabled for compilation.
+    ///
+    /// This feature gates items such as the `externref` and `funcref` types as
+    /// well as allowing a module to define multiple tables.
+    ///
+    /// Note that the reference types proposal depends on the bulk memory proposal.
+    ///
+    /// This feature is `true` by default.
+    ///
+    /// # Errors
+    ///
+    /// The validation of this feature are deferred until the engine is being built,
+    /// and thus may cause `Engine::new` fail if the `bulk_memory` feature is disabled.
+    ///
+    /// [proposal]: https://github.com/webassembly/reference-types
+    pub fn wasm_reference_types(&mut self, enable: bool) -> &mut Self {
+        self.features.reference_types = enable;
+        self
+    }
+
+    /// Configures whether the [WebAssembly function references proposal][proposal]
+    /// will be enabled for compilation.
+    ///
+    /// This feature gates non-nullable reference types, function reference
+    /// types, call_ref, ref.func, and non-nullable reference related instructions.
+    ///
+    /// Note that the function references proposal depends on the reference types proposal.
+    ///
+    /// This feature is `false` by default.
+    ///
+    /// [proposal]: https://github.com/WebAssembly/function-references
+    pub fn wasm_function_references(&mut self, enable: bool) -> &mut Self {
+        self.features.function_references = enable;
+        self
+    }
+
+    /// Configures whether the WebAssembly SIMD proposal will be
+    /// enabled for compilation.
+    ///
+    /// The [WebAssembly SIMD proposal][proposal]. This feature gates items such
+    /// as the `v128` type and all of its operators being in a module. Note that
+    /// this does not enable the [relaxed simd proposal].
+    ///
+    /// On x86_64 platforms note that enabling this feature requires SSE 4.2 and
+    /// below to be available on the target platform. Compilation will fail if
+    /// the compile target does not include SSE 4.2.
+    ///
+    /// This is `true` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/simd
+    /// [relaxed simd proposal]: https://github.com/WebAssembly/relaxed-simd
+    pub fn wasm_simd(&mut self, enable: bool) -> &mut Self {
+        self.features.simd = enable;
+        self
+    }
+
+    /// Configures whether the WebAssembly Relaxed SIMD proposal will be
+    /// enabled for compilation.
+    ///
+    /// The [WebAssembly Relaxed SIMD proposal][proposal] is not, at the time of
+    /// this writing, at stage 4. The relaxed SIMD proposal adds new
+    /// instructions to WebAssembly which, for some specific inputs, are allowed
+    /// to produce different results on different hosts. More-or-less this
+    /// proposal enables exposing platform-specific semantics of SIMD
+    /// instructions in a controlled fashion to a WebAssembly program. From an
+    /// embedder's perspective this means that WebAssembly programs may execute
+    /// differently depending on whether the host is x86_64 or AArch64, for
+    /// example.
+    ///
+    /// By default Wasmtime lowers relaxed SIMD instructions to the fastest
+    /// lowering for the platform it's running on. This means that, by default,
+    /// some relaxed SIMD instructions may have different results for the same
+    /// inputs across x86_64 and AArch64. This behavior can be disabled through
+    /// the [`Config::relaxed_simd_deterministic`] option which will force
+    /// deterministic behavior across all platforms, as classified by the
+    /// specification, at the cost of performance.
+    ///
+    /// This is `false` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/relaxed-simd
+    pub fn wasm_relaxed_simd(&mut self, enable: bool) -> &mut Self {
+        self.features.relaxed_simd = enable;
+        self
+    }
+
+    /// This option can be used to control the behavior of the [relaxed SIMD
+    /// proposal's][proposal] instructions.
+    ///
+    /// The relaxed SIMD proposal introduces instructions that are allowed to
+    /// have different behavior on different architectures, primarily to afford
+    /// an efficient implementation on all architectures. This means, however,
+    /// that the same module may execute differently on one host than another,
+    /// which typically is not otherwise the case. This option is provided to
+    /// force Wasmtime to generate deterministic code for all relaxed simd
+    /// instructions, at the cost of performance, for all architectures. When
+    /// this option is enabled then the deterministic behavior of all
+    /// instructions in the relaxed SIMD proposal is selected.
+    ///
+    /// This is `false` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/relaxed-simd
+    pub fn relaxed_simd_deterministic(&mut self, enable: bool) -> &mut Self {
+        self.tunables.relaxed_simd_deterministic = enable;
+        self
+    }
+
+    /// Configures whether the [WebAssembly bulk memory operations
+    /// proposal][proposal] will be enabled for compilation.
+    ///
+    /// This feature gates items such as the `memory.copy` instruction, passive
+    /// data/table segments, etc, being in a module.
+    ///
+    /// This is `true` by default.
+    ///
+    /// Feature `reference_types`, which is also `true` by default, requires
+    /// this feature to be enabled. Thus disabling this feature must also disable
+    /// `reference_types` as well using [`wasm_reference_types`](crate::Config::wasm_reference_types).
+    ///
+    /// # Errors
+    ///
+    /// Disabling this feature without disabling `reference_types` will cause
+    /// `Engine::new` to fail.
+    ///
+    /// [proposal]: https://github.com/webassembly/bulk-memory-operations
+    pub fn wasm_bulk_memory(&mut self, enable: bool) -> &mut Self {
+        self.features.bulk_memory = enable;
+        self
+    }
+
+    /// Configures whether the WebAssembly multi-value [proposal] will
+    /// be enabled for compilation.
+    ///
+    /// This feature gates functions and blocks returning multiple values in a
+    /// module, for example.
+    ///
+    /// This is `true` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/multi-value
+    pub fn wasm_multi_value(&mut self, enable: bool) -> &mut Self {
+        self.features.multi_value = enable;
+        self
+    }
+
+    /// Configures whether the WebAssembly multi-memory [proposal] will
+    /// be enabled for compilation.
+    ///
+    /// This feature gates modules having more than one linear memory
+    /// declaration or import.
+    ///
+    /// This is `false` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/multi-memory
+    pub fn wasm_multi_memory(&mut self, enable: bool) -> &mut Self {
+        self.features.multi_memory = enable;
+        self
+    }
+
+    /// Configures whether the WebAssembly memory64 [proposal] will
+    /// be enabled for compilation.
+    ///
+    /// Note that this the upstream specification is not finalized and Wasmtime
+    /// may also have bugs for this feature since it hasn't been exercised
+    /// much.
+    ///
+    /// This is `false` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/memory64
+    pub fn wasm_memory64(&mut self, enable: bool) -> &mut Self {
+        self.features.memory64 = enable;
+        self
+    }
+
+    /// Configures whether the WebAssembly component-model [proposal] will
+    /// be enabled for compilation.
+    ///
+    /// Note that this feature is a work-in-progress and is incomplete.
+    ///
+    /// This is `false` by default.
+    ///
+    /// [proposal]: https://github.com/webassembly/component-model
+    #[cfg(feature = "component-model")]
+    pub fn wasm_component_model(&mut self, enable: bool) -> &mut Self {
+        self.features.component_model = enable;
+        self
+    }
+
+    /// Configures which compilation strategy will be used for wasm modules.
+    ///
+    /// This method can be used to configure which compiler is used for wasm
+    /// modules, and for more documentation consult the [`Strategy`] enumeration
+    /// and its documentation.
+    ///
+    /// The default value for this is `Strategy::Auto`.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn strategy(&mut self, strategy: Strategy) -> &mut Self {
+        self.compiler_config.strategy = strategy;
+        self
+    }
+
+    /// Creates a default profiler based on the profiling strategy chosen.
+    ///
+    /// Profiler creation calls the type's default initializer where the purpose is
+    /// really just to put in place the type used for profiling.
+    ///
+    /// Some [`ProfilingStrategy`] require specific platforms or particular feature
+    /// to be enabled, such as `ProfilingStrategy::JitDump` requires the `jitdump`
+    /// feature.
+    ///
+    /// # Errors
+    ///
+    /// The validation of this field is deferred until the engine is being built, and thus may
+    /// cause `Engine::new` fail if the required feature is disabled, or the platform is not
+    /// supported.
+    pub fn profiler(&mut self, profile: ProfilingStrategy) -> &mut Self {
+        self.profiling_strategy = profile;
+        self
+    }
+
+    /// Configures whether the debug verifier of Cranelift is enabled or not.
+    ///
+    /// When Cranelift is used as a code generation backend this will configure
+    /// it to have the `enable_verifier` flag which will enable a number of debug
+    /// checks inside of Cranelift. This is largely only useful for the
+    /// developers of wasmtime itself.
+    ///
+    /// The default value for this is `false`
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn cranelift_debug_verifier(&mut self, enable: bool) -> &mut Self {
+        let val = if enable { "true" } else { "false" };
+        self.compiler_config
+            .settings
+            .insert("enable_verifier".to_string(), val.to_string());
+        self
+    }
+
+    /// Configures the Cranelift code generator optimization level.
+    ///
+    /// When the Cranelift code generator is used you can configure the
+    /// optimization level used for generated code in a few various ways. For
+    /// more information see the documentation of [`OptLevel`].
+    ///
+    /// The default value for this is `OptLevel::None`.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn cranelift_opt_level(&mut self, level: OptLevel) -> &mut Self {
+        let val = match level {
+            OptLevel::None => "none",
+            OptLevel::Speed => "speed",
+            OptLevel::SpeedAndSize => "speed_and_size",
+        };
+        self.compiler_config
+            .settings
+            .insert("opt_level".to_string(), val.to_string());
+        self
+    }
+
+    /// Configures whether Cranelift should perform a NaN-canonicalization pass.
+    ///
+    /// When Cranelift is used as a code generation backend this will configure
+    /// it to replace NaNs with a single canonical value. This is useful for users
+    /// requiring entirely deterministic WebAssembly computation.
+    /// This is not required by the WebAssembly spec, so it is not enabled by default.
+    ///
+    /// The default value for this is `false`
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub fn cranelift_nan_canonicalization(&mut self, enable: bool) -> &mut Self {
+        let val = if enable { "true" } else { "false" };
+        self.compiler_config
+            .settings
+            .insert("enable_nan_canonicalization".to_string(), val.to_string());
+        self
+    }
+
+    /// Allows setting a Cranelift boolean flag or preset. This allows
+    /// fine-tuning of Cranelift settings.
+    ///
+    /// Since Cranelift flags may be unstable, this method should not be considered to be stable
+    /// either; other `Config` functions should be preferred for stability.
+    ///
+    /// # Safety
+    ///
+    /// This is marked as unsafe, because setting the wrong flag might break invariants,
+    /// resulting in execution hazards.
+    ///
+    /// # Errors
+    ///
+    /// The validation of the flags are deferred until the engine is being built, and thus may
+    /// cause `Engine::new` fail if the flag's name does not exist, or the value is not appropriate
+    /// for the flag type.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub unsafe fn cranelift_flag_enable(&mut self, flag: &str) -> &mut Self {
+        self.compiler_config.flags.insert(flag.to_string());
+        self
+    }
+
+    /// Allows settings another Cranelift flag defined by a flag name and value. This allows
+    /// fine-tuning of Cranelift settings.
+    ///
+    /// Since Cranelift flags may be unstable, this method should not be considered to be stable
+    /// either; other `Config` functions should be preferred for stability.
+    ///
+    /// # Safety
+    ///
+    /// This is marked as unsafe, because setting the wrong flag might break invariants,
+    /// resulting in execution hazards.
+    ///
+    /// # Errors
+    ///
+    /// The validation of the flags are deferred until the engine is being built, and thus may
+    /// cause `Engine::new` fail if the flag's name does not exist, or incompatible with other
+    /// settings.
+    ///
+    /// For example, feature `wasm_backtrace` will set `unwind_info` to `true`, but if it's
+    /// manually set to false then it will fail.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    #[cfg_attr(nightlydoc, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
+    pub unsafe fn cranelift_flag_set(&mut self, name: &str, value: &str) -> &mut Self {
+        self.compiler_config
+            .settings
+            .insert(name.to_string(), value.to_string());
+        self
+    }
+
+    /// Loads cache configuration specified at `path`.
+    ///
+    /// This method will read the file specified by `path` on the filesystem and
+    /// attempt to load cache configuration from it. This method can also fail
+    /// due to I/O errors, misconfiguration, syntax errors, etc. For expected
+    /// syntax in the configuration file see the [documentation online][docs].
+    ///
+    /// By default cache configuration is not enabled or loaded.
+    ///
+    /// This method is only available when the `cache` feature of this crate is
+    /// enabled.
+    ///
+    /// # Errors
+    ///
+    /// This method can fail due to any error that happens when loading the file
+    /// pointed to by `path` and attempting to load the cache configuration.
+    ///
+    /// [docs]: https://bytecodealliance.github.io/wasmtime/cli-cache.html
+    #[cfg(feature = "cache")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "cache")))]
+    pub fn cache_config_load(&mut self, path: impl AsRef<Path>) -> Result<&mut Self> {
+        self.cache_config = CacheConfig::from_file(Some(path.as_ref()))?;
+        Ok(self)
+    }
+
+    /// Disable caching.
+    ///
+    /// Every call to [`Module::new(my_wasm)`][crate::Module::new] will
+    /// recompile `my_wasm`, even when it is unchanged.
+    ///
+    /// By default, new configs do not have caching enabled. This method is only
+    /// useful for disabling a previous cache configuration.
+    ///
+    /// This method is only available when the `cache` feature of this crate is
+    /// enabled.
+    #[cfg(feature = "cache")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "cache")))]
+    pub fn disable_cache(&mut self) -> &mut Self {
+        self.cache_config = CacheConfig::new_cache_disabled();
+        self
+    }
+
+    /// Loads cache configuration from the system default path.
+    ///
+    /// This commit is the same as [`Config::cache_config_load`] except that it
+    /// does not take a path argument and instead loads the default
+    /// configuration present on the system. This is located, for example, on
+    /// Unix at `$HOME/.config/wasmtime/config.toml` and is typically created
+    /// with the `wasmtime config new` command.
+    ///
+    /// By default cache configuration is not enabled or loaded.
+    ///
+    /// This method is only available when the `cache` feature of this crate is
+    /// enabled.
+    ///
+    /// # Errors
+    ///
+    /// This method can fail due to any error that happens when loading the
+    /// default system configuration. Note that it is not an error if the
+    /// default config file does not exist, in which case the default settings
+    /// for an enabled cache are applied.
+    ///
+    /// [docs]: https://bytecodealliance.github.io/wasmtime/cli-cache.html
+    #[cfg(feature = "cache")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "cache")))]
+    pub fn cache_config_load_default(&mut self) -> Result<&mut Self> {
+        self.cache_config = CacheConfig::from_file(None)?;
+        Ok(self)
+    }
+
+    /// Sets a custom memory creator.
+    ///
+    /// Custom memory creators are used when creating host `Memory` objects or when
+    /// creating instance linear memories for the on-demand instance allocation strategy.
+    pub fn with_host_memory(&mut self, mem_creator: Arc<dyn MemoryCreator>) -> &mut Self {
+        self.mem_creator = Some(Arc::new(MemoryCreatorProxy(mem_creator)));
+        self
+    }
+
+    /// Sets the instance allocation strategy to use.
+    ///
+    /// When using the pooling instance allocation strategy, all linear memories
+    /// will be created as "static" and the
+    /// [`Config::static_memory_maximum_size`] and
+    /// [`Config::static_memory_guard_size`] options will be used to configure
+    /// the virtual memory allocations of linear memories.
+    pub fn allocation_strategy(&mut self, strategy: InstanceAllocationStrategy) -> &mut Self {
+        self.allocation_strategy = strategy;
+        self
+    }
+
+    /// Configures the maximum size, in bytes, where a linear memory is
+    /// considered static, above which it'll be considered dynamic.
+    ///
+    /// > Note: this value has important performance ramifications, be sure to
+    /// > understand what this value does before tweaking it and benchmarking.
+    ///
+    /// This function configures the threshold for wasm memories whether they're
+    /// implemented as a dynamically relocatable chunk of memory or a statically
+    /// located chunk of memory. The `max_size` parameter here is the size, in
+    /// bytes, where if the maximum size of a linear memory is below `max_size`
+    /// then it will be statically allocated with enough space to never have to
+    /// move. If the maximum size of a linear memory is larger than `max_size`
+    /// then wasm memory will be dynamically located and may move in memory
+    /// through growth operations.
+    ///
+    /// Specifying a `max_size` of 0 means that all memories will be dynamic and
+    /// may be relocated through `memory.grow`. Also note that if any wasm
+    /// memory's maximum size is below `max_size` then it will still reserve
+    /// `max_size` bytes in the virtual memory space.
+    ///
+    /// ## Static vs Dynamic Memory
+    ///
+    /// Linear memories represent contiguous arrays of bytes, but they can also
+    /// be grown through the API and wasm instructions. When memory is grown if
+    /// space hasn't been preallocated then growth may involve relocating the
+    /// base pointer in memory. Memories in Wasmtime are classified in two
+    /// different ways:
+    ///
+    /// * **static** - these memories preallocate all space necessary they'll
+    ///   ever need, meaning that the base pointer of these memories is never
+    ///   moved. Static memories may take more virtual memory space because of
+    ///   pre-reserving space for memories.
+    ///
+    /// * **dynamic** - these memories are not preallocated and may move during
+    ///   growth operations. Dynamic memories consume less virtual memory space
+    ///   because they don't need to preallocate space for future growth.
+    ///
+    /// Static memories can be optimized better in JIT code because once the
+    /// base address is loaded in a function it's known that we never need to
+    /// reload it because it never changes, `memory.grow` is generally a pretty
+    /// fast operation because the wasm memory is never relocated, and under
+    /// some conditions bounds checks can be elided on memory accesses.
+    ///
+    /// Dynamic memories can't be quite as heavily optimized because the base
+    /// address may need to be reloaded more often, they may require relocating
+    /// lots of data on `memory.grow`, and dynamic memories require
+    /// unconditional bounds checks on all memory accesses.
+    ///
+    /// ## Should you use static or dynamic memory?
+    ///
+    /// In general you probably don't need to change the value of this property.
+    /// The defaults here are optimized for each target platform to consume a
+    /// reasonable amount of physical memory while also generating speedy
+    /// machine code.
+    ///
+    /// One of the main reasons you may want to configure this today is if your
+    /// environment can't reserve virtual memory space for each wasm linear
+    /// memory. On 64-bit platforms wasm memories require a 6GB reservation by
+    /// default, and system limits may prevent this in some scenarios. In this
+    /// case you may wish to force memories to be allocated dynamically meaning
+    /// that the virtual memory footprint of creating a wasm memory should be
+    /// exactly what's used by the wasm itself.
+    ///
+    /// For 32-bit memories a static memory must contain at least 4GB of
+    /// reserved address space plus a guard page to elide any bounds checks at
+    /// all. Smaller static memories will use similar bounds checks as dynamic
+    /// memories.
+    ///
+    /// ## Default
+    ///
+    /// The default value for this property depends on the host platform. For
+    /// 64-bit platforms there's lots of address space available, so the default
+    /// configured here is 4GB. WebAssembly linear memories currently max out at
+    /// 4GB which means that on 64-bit platforms Wasmtime by default always uses
+    /// a static memory. This, coupled with a sufficiently sized guard region,
+    /// should produce the fastest JIT code on 64-bit platforms, but does
+    /// require a large address space reservation for each wasm memory.
+    ///
+    /// For 32-bit platforms this value defaults to 1GB. This means that wasm
+    /// memories whose maximum size is less than 1GB will be allocated
+    /// statically, otherwise they'll be considered dynamic.
+    ///
+    /// ## Static Memory and Pooled Instance Allocation
+    ///
+    /// When using the pooling instance allocator memories are considered to
+    /// always be static memories, they are never dynamic. This setting
+    /// configures the size of linear memory to reserve for each memory in the
+    /// pooling allocator.
+    pub fn static_memory_maximum_size(&mut self, max_size: u64) -> &mut Self {
+        let max_pages = max_size / u64::from(wasmtime_environ::WASM_PAGE_SIZE);
+        self.tunables.static_memory_bound = max_pages;
+        self
+    }
+
+    /// Indicates that the "static" style of memory should always be used.
+    ///
+    /// This configuration option enables selecting the "static" option for all
+    /// linear memories created within this `Config`. This means that all
+    /// memories will be allocated up-front and will never move. Additionally
+    /// this means that all memories are synthetically limited by the
+    /// [`Config::static_memory_maximum_size`] option, irregardless of what the
+    /// actual maximum size is on the memory's original type.
+    ///
+    /// For the difference between static and dynamic memories, see the
+    /// [`Config::static_memory_maximum_size`].
+    pub fn static_memory_forced(&mut self, force: bool) -> &mut Self {
+        self.tunables.static_memory_bound_is_maximum = force;
+        self
+    }
+
+    /// Configures the size, in bytes, of the guard region used at the end of a
+    /// static memory's address space reservation.
+    ///
+    /// > Note: this value has important performance ramifications, be sure to
+    /// > understand what this value does before tweaking it and benchmarking.
+    ///
+    /// All WebAssembly loads/stores are bounds-checked and generate a trap if
+    /// they're out-of-bounds. Loads and stores are often very performance
+    /// critical, so we want the bounds check to be as fast as possible!
+    /// Accelerating these memory accesses is the motivation for a guard after a
+    /// memory allocation.
+    ///
+    /// Memories (both static and dynamic) can be configured with a guard at the
+    /// end of them which consists of unmapped virtual memory. This unmapped
+    /// memory will trigger a memory access violation (e.g. segfault) if
+    /// accessed. This allows JIT code to elide bounds checks if it can prove
+    /// that an access, if out of bounds, would hit the guard region. This means
+    /// that having such a guard of unmapped memory can remove the need for
+    /// bounds checks in JIT code.
+    ///
+    /// For the difference between static and dynamic memories, see the
+    /// [`Config::static_memory_maximum_size`].
+    ///
+    /// ## How big should the guard be?
+    ///
+    /// In general, like with configuring `static_memory_maximum_size`, you
+    /// probably don't want to change this value from the defaults. Otherwise,
+    /// though, the size of the guard region affects the number of bounds checks
+    /// needed for generated wasm code. More specifically, loads/stores with
+    /// immediate offsets will generate bounds checks based on how big the guard
+    /// page is.
+    ///
+    /// For 32-bit memories a 4GB static memory is required to even start
+    /// removing bounds checks. A 4GB guard size will guarantee that the module
+    /// has zero bounds checks for memory accesses. A 2GB guard size will
+    /// eliminate all bounds checks with an immediate offset less than 2GB. A
+    /// guard size of zero means that all memory accesses will still have bounds
+    /// checks.
+    ///
+    /// ## Default
+    ///
+    /// The default value for this property is 2GB on 64-bit platforms. This
+    /// allows eliminating almost all bounds checks on loads/stores with an
+    /// immediate offset of less than 2GB. On 32-bit platforms this defaults to
+    /// 64KB.
+    ///
+    /// ## Errors
+    ///
+    /// The `Engine::new` method will return an error if this option is smaller
+    /// than the value configured for [`Config::dynamic_memory_guard_size`].
+    pub fn static_memory_guard_size(&mut self, guard_size: u64) -> &mut Self {
+        let guard_size = round_up_to_pages(guard_size);
+        self.tunables.static_memory_offset_guard_size = guard_size;
+        self
+    }
+
+    /// Configures the size, in bytes, of the guard region used at the end of a
+    /// dynamic memory's address space reservation.
+    ///
+    /// For the difference between static and dynamic memories, see the
+    /// [`Config::static_memory_maximum_size`]
+    ///
+    /// For more information about what a guard is, see the documentation on
+    /// [`Config::static_memory_guard_size`].
+    ///
+    /// Note that the size of the guard region for dynamic memories is not super
+    /// critical for performance. Making it reasonably-sized can improve
+    /// generated code slightly, but for maximum performance you'll want to lean
+    /// towards static memories rather than dynamic anyway.
+    ///
+    /// Also note that the dynamic memory guard size must be smaller than the
+    /// static memory guard size, so if a large dynamic memory guard is
+    /// specified then the static memory guard size will also be automatically
+    /// increased.
+    ///
+    /// ## Default
+    ///
+    /// This value defaults to 64KB.
+    ///
+    /// ## Errors
+    ///
+    /// The `Engine::new` method will return an error if this option is larger
+    /// than the value configured for [`Config::static_memory_guard_size`].
+    pub fn dynamic_memory_guard_size(&mut self, guard_size: u64) -> &mut Self {
+        let guard_size = round_up_to_pages(guard_size);
+        self.tunables.dynamic_memory_offset_guard_size = guard_size;
+        self
+    }
+
+    /// Configures the size, in bytes, of the extra virtual memory space
+    /// reserved after a "dynamic" memory for growing into.
+    ///
+    /// For the difference between static and dynamic memories, see the
+    /// [`Config::static_memory_maximum_size`]
+    ///
+    /// Dynamic memories can be relocated in the process's virtual address space
+    /// on growth and do not always reserve their entire space up-front. This
+    /// means that a growth of the memory may require movement in the address
+    /// space, which in the worst case can copy a large number of bytes from one
+    /// region to another.
+    ///
+    /// This setting configures how many bytes are reserved after the initial
+    /// reservation for a dynamic memory for growing into. A value of 0 here
+    /// means that no extra bytes are reserved and all calls to `memory.grow`
+    /// will need to relocate the wasm linear memory (copying all the bytes). A
+    /// value of 1 megabyte, however, means that `memory.grow` can allocate up
+    /// to a megabyte of extra memory before the memory needs to be moved in
+    /// linear memory.
+    ///
+    /// Note that this is a currently simple heuristic for optimizing the growth
+    /// of dynamic memories, primarily implemented for the memory64 proposal
+    /// where all memories are currently "dynamic". This is unlikely to be a
+    /// one-size-fits-all style approach and if you're an embedder running into
+    /// issues with dynamic memories and growth and are interested in having
+    /// other growth strategies available here please feel free to [open an
+    /// issue on the Wasmtime repository][issue]!
+    ///
+    /// [issue]: https://github.com/bytecodealliance/wasmtime/issues/ne
+    ///
+    /// ## Default
+    ///
+    /// For 64-bit platforms this defaults to 2GB, and for 32-bit platforms this
+    /// defaults to 1MB.
+    pub fn dynamic_memory_reserved_for_growth(&mut self, reserved: u64) -> &mut Self {
+        self.tunables.dynamic_memory_growth_reserve = round_up_to_pages(reserved);
+        self
+    }
+
+    /// Indicates whether a guard region is present before allocations of
+    /// linear memory.
+    ///
+    /// Guard regions before linear memories are never used during normal
+    /// operation of WebAssembly modules, even if they have out-of-bounds
+    /// loads. The only purpose for a preceding guard region in linear memory
+    /// is extra protection against possible bugs in code generators like
+    /// Cranelift. This setting does not affect performance in any way, but will
+    /// result in larger virtual memory reservations for linear memories (it
+    /// won't actually ever use more memory, just use more of the address
+    /// space).
+    ///
+    /// The size of the guard region before linear memory is the same as the
+    /// guard size that comes after linear memory, which is configured by
+    /// [`Config::static_memory_guard_size`] and
+    /// [`Config::dynamic_memory_guard_size`].
+    ///
+    /// ## Default
+    ///
+    /// This value defaults to `true`.
+    pub fn guard_before_linear_memory(&mut self, guard: bool) -> &mut Self {
+        self.tunables.guard_before_linear_memory = guard;
+        self
+    }
+
+    /// Configure the version information used in serialized and deserialzied [`crate::Module`]s.
+    /// This effects the behavior of [`crate::Module::serialize()`], as well as
+    /// [`crate::Module::deserialize()`] and related functions.
+    ///
+    /// The default strategy is to use the wasmtime crate's Cargo package version.
+    pub fn module_version(&mut self, strategy: ModuleVersionStrategy) -> Result<&mut Self> {
+        match strategy {
+            // This case requires special precondition for assertion in SerializedModule::to_bytes
+            ModuleVersionStrategy::Custom(ref v) => {
+                if v.as_bytes().len() > 255 {
+                    bail!("custom module version cannot be more than 255 bytes: {}", v);
+                }
+            }
+            _ => {}
+        }
+        self.module_version = strategy;
+        Ok(self)
+    }
+
+    /// Configure wether wasmtime should compile a module using multiple
+    /// threads.
+    ///
+    /// Disabling this will result in a single thread being used to compile
+    /// the wasm bytecode.
+    ///
+    /// By default parallel compilation is enabled.
+    #[cfg(feature = "parallel-compilation")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "parallel-compilation")))]
+    pub fn parallel_compilation(&mut self, parallel: bool) -> &mut Self {
+        self.parallel_compilation = parallel;
+        self
+    }
+
+    /// Configures whether compiled artifacts will contain information to map
+    /// native program addresses back to the original wasm module.
+    ///
+    /// This configuration option is `true` by default and, if enabled,
+    /// generates the appropriate tables in compiled modules to map from native
+    /// address back to wasm source addresses. This is used for displaying wasm
+    /// program counters in backtraces as well as generating filenames/line
+    /// numbers if so configured as well (and the original wasm module has DWARF
+    /// debugging information present).
+    pub fn generate_address_map(&mut self, generate: bool) -> &mut Self {
+        self.tunables.generate_address_map = generate;
+        self
+    }
+
+    /// Configures whether copy-on-write memory-mapped data is used to
+    /// initialize a linear memory.
+    ///
+    /// Initializing linear memory via a copy-on-write mapping can drastically
+    /// improve instantiation costs of a WebAssembly module because copying
+    /// memory is deferred. Additionally if a page of memory is only ever read
+    /// from WebAssembly and never written too then the same underlying page of
+    /// data will be reused between all instantiations of a module meaning that
+    /// if a module is instantiated many times this can lower the overall memory
+    /// required needed to run that module.
+    ///
+    /// This feature is only applicable when a WebAssembly module meets specific
+    /// criteria to be initialized in this fashion, such as:
+    ///
+    /// * Only memories defined in the module can be initialized this way.
+    /// * Data segments for memory must use statically known offsets.
+    /// * Data segments for memory must all be in-bounds.
+    ///
+    /// Modules which do not meet these criteria will fall back to
+    /// initialization of linear memory based on copying memory.
+    ///
+    /// This feature of Wasmtime is also platform-specific:
+    ///
+    /// * Linux - this feature is supported for all instances of [`Module`].
+    ///   Modules backed by an existing mmap (such as those created by
+    ///   [`Module::deserialize_file`]) will reuse that mmap to cow-initialize
+    ///   memory. Other instance of [`Module`] may use the `memfd_create`
+    ///   syscall to create an initialization image to `mmap`.
+    /// * Unix (not Linux) - this feature is only supported when loading modules
+    ///   from a precompiled file via [`Module::deserialize_file`] where there
+    ///   is a file descriptor to use to map data into the process. Note that
+    ///   the module must have been compiled with this setting enabled as well.
+    /// * Windows - there is no support for this feature at this time. Memory
+    ///   initialization will always copy bytes.
+    ///
+    /// By default this option is enabled.
+    ///
+    /// [`Module::deserialize_file`]: crate::Module::deserialize_file
+    /// [`Module`]: crate::Module
+    pub fn memory_init_cow(&mut self, enable: bool) -> &mut Self {
+        self.memory_init_cow = enable;
+        self
+    }
+
+    /// A configuration option to force the usage of `memfd_create` on Linux to
+    /// be used as the backing source for a module's initial memory image.
+    ///
+    /// When [`Config::memory_init_cow`] is enabled, which is enabled by
+    /// default, module memory initialization images are taken from a module's
+    /// original mmap if possible. If a precompiled module was loaded from disk
+    /// this means that the disk's file is used as an mmap source for the
+    /// initial linear memory contents. This option can be used to force, on
+    /// Linux, that instead of using the original file on disk a new in-memory
+    /// file is created with `memfd_create` to hold the contents of the initial
+    /// image.
+    ///
+    /// This option can be used to avoid possibly loading the contents of memory
+    /// from disk through a page fault. Instead with `memfd_create` the contents
+    /// of memory are always in RAM, meaning that even page faults which
+    /// initially populate a wasm linear memory will only work with RAM instead
+    /// of ever hitting the disk that the original precompiled module is stored
+    /// on.
+    ///
+    /// This option is disabled by default.
+    pub fn force_memory_init_memfd(&mut self, enable: bool) -> &mut Self {
+        self.force_memory_init_memfd = enable;
+        self
+    }
+
+    /// Configures the "guaranteed dense image size" for copy-on-write
+    /// initialized memories.
+    ///
+    /// When using the [`Config::memory_init_cow`] feature to initialize memory
+    /// efficiently (which is enabled by default), compiled modules contain an
+    /// image of the module's initial heap. If the module has a fairly sparse
+    /// initial heap, with just a few data segments at very different offsets,
+    /// this could result in a large region of zero bytes in the image. In
+    /// other words, it's not very memory-efficient.
+    ///
+    /// We normally use a heuristic to avoid this: if less than half
+    /// of the initialized range (first non-zero to last non-zero
+    /// byte) of any memory in the module has pages with nonzero
+    /// bytes, then we avoid creating a memory image for the entire module.
+    ///
+    /// However, if the embedder always needs the instantiation-time efficiency
+    /// of copy-on-write initialization, and is otherwise carefully controlling
+    /// parameters of the modules (for example, by limiting the maximum heap
+    /// size of the modules), then it may be desirable to ensure a memory image
+    /// is created even if this could go against the heuristic above. Thus, we
+    /// add another condition: there is a size of initialized data region up to
+    /// which we *always* allow a memory image. The embedder can set this to a
+    /// known maximum heap size if they desire to always get the benefits of
+    /// copy-on-write images.
+    ///
+    /// In the future we may implement a "best of both worlds"
+    /// solution where we have a dense image up to some limit, and
+    /// then support a sparse list of initializers beyond that; this
+    /// would get most of the benefit of copy-on-write and pay the incremental
+    /// cost of eager initialization only for those bits of memory
+    /// that are out-of-bounds. However, for now, an embedder desiring
+    /// fast instantiation should ensure that this setting is as large
+    /// as the maximum module initial memory content size.
+    ///
+    /// By default this value is 16 MiB.
+    pub fn memory_guaranteed_dense_image_size(&mut self, size_in_bytes: u64) -> &mut Self {
+        self.memory_guaranteed_dense_image_size = size_in_bytes;
+        self
+    }
+
+    pub(crate) fn validate(&self) -> Result<()> {
+        if self.features.reference_types && !self.features.bulk_memory {
+            bail!("feature 'reference_types' requires 'bulk_memory' to be enabled");
+        }
+        if self.features.threads && !self.features.bulk_memory {
+            bail!("feature 'threads' requires 'bulk_memory' to be enabled");
+        }
+        #[cfg(feature = "async")]
+        if self.max_wasm_stack > self.async_stack_size {
+            bail!("max_wasm_stack size cannot exceed the async_stack_size");
+        }
+        if self.max_wasm_stack == 0 {
+            bail!("max_wasm_stack size cannot be zero");
+        }
+        if self.tunables.static_memory_offset_guard_size
+            < self.tunables.dynamic_memory_offset_guard_size
+        {
+            bail!("static memory guard size cannot be smaller than dynamic memory guard size");
+        }
+
+        Ok(())
+    }
+
+    pub(crate) fn build_allocator(&self) -> Result<Box<dyn InstanceAllocator + Send + Sync>> {
+        #[cfg(feature = "async")]
+        let stack_size = self.async_stack_size;
+
+        #[cfg(not(feature = "async"))]
+        let stack_size = 0;
+
+        match &self.allocation_strategy {
+            InstanceAllocationStrategy::OnDemand => Ok(Box::new(OnDemandInstanceAllocator::new(
+                self.mem_creator.clone(),
+                stack_size,
+            ))),
+            #[cfg(feature = "pooling-allocator")]
+            InstanceAllocationStrategy::Pooling(config) => {
+                let mut config = config.config;
+                config.stack_size = stack_size;
+                Ok(Box::new(wasmtime_runtime::PoolingInstanceAllocator::new(
+                    &config,
+                    &self.tunables,
+                )?))
+            }
+        }
+    }
+
+    pub(crate) fn build_profiler(&self) -> Result<Box<dyn ProfilingAgent>> {
+        Ok(match self.profiling_strategy {
+            ProfilingStrategy::PerfMap => profiling::new_perfmap()?,
+            ProfilingStrategy::JitDump => profiling::new_jitdump()?,
+            ProfilingStrategy::VTune => profiling::new_vtune()?,
+            ProfilingStrategy::None => profiling::new_null(),
+        })
+    }
+
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    pub(crate) fn build_compiler(mut self) -> Result<(Self, Box<dyn wasmtime_environ::Compiler>)> {
+        let mut compiler = match self.compiler_config.strategy {
+            #[cfg(feature = "cranelift")]
+            Strategy::Auto => wasmtime_cranelift::builder(),
+            #[cfg(all(feature = "winch", not(feature = "cranelift")))]
+            Strategy::Auto => wasmtime_winch::builder(),
+            #[cfg(feature = "cranelift")]
+            Strategy::Cranelift => wasmtime_cranelift::builder(),
+            #[cfg(not(feature = "cranelift"))]
+            Strategy::Cranelift => bail!("cranelift support not compiled in"),
+            #[cfg(feature = "winch")]
+            Strategy::Winch => wasmtime_winch::builder(),
+            #[cfg(not(feature = "winch"))]
+            Strategy::Winch => bail!("winch support not compiled in"),
+        };
+
+        if let Some(target) = &self.compiler_config.target {
+            compiler.target(target.clone())?;
+        }
+
+        if let Some(path) = &self.compiler_config.clif_dir {
+            compiler.clif_dir(path)?;
+        }
+
+        // If probestack is enabled for a target, Wasmtime will always use the
+        // inline strategy which doesn't require us to define a `__probestack`
+        // function or similar.
+        self.compiler_config
+            .settings
+            .insert("probestack_strategy".into(), "inline".into());
+
+        let host = target_lexicon::Triple::host();
+        let target = self.compiler_config.target.as_ref().unwrap_or(&host);
+
+        // On supported targets, we enable stack probing by default.
+        // This is required on Windows because of the way Windows
+        // commits its stacks, but it's also a good idea on other
+        // platforms to ensure guard pages are hit for large frame
+        // sizes.
+        if probestack_supported(target.architecture) {
+            self.compiler_config
+                .flags
+                .insert("enable_probestack".into());
+        }
+
+        if self.native_unwind_info ||
+             // Windows always needs unwind info, since it is part of the ABI.
+             target.operating_system == target_lexicon::OperatingSystem::Windows
+        {
+            if !self
+                .compiler_config
+                .ensure_setting_unset_or_given("unwind_info", "true")
+            {
+                bail!("compiler option 'unwind_info' must be enabled profiling");
+            }
+        }
+
+        // We require frame pointers for correct stack walking, which is safety
+        // critical in the presence of reference types, and otherwise it is just
+        // really bad developer experience to get wrong.
+        self.compiler_config
+            .settings
+            .insert("preserve_frame_pointers".into(), "true".into());
+
+        // check for incompatible compiler options and set required values
+        if self.features.reference_types {
+            if !self
+                .compiler_config
+                .ensure_setting_unset_or_given("enable_safepoints", "true")
+            {
+                bail!("compiler option 'enable_safepoints' must be enabled when 'reference types' is enabled");
+            }
+        }
+        if self.features.simd {
+            if !self
+                .compiler_config
+                .ensure_setting_unset_or_given("enable_simd", "true")
+            {
+                bail!("compiler option 'enable_simd' must be enabled when 'simd' is enabled");
+            }
+        }
+
+        if self.features.relaxed_simd && !self.features.simd {
+            bail!("cannot disable the simd proposal but enable the relaxed simd proposal");
+        }
+
+        // Apply compiler settings and flags
+        for (k, v) in self.compiler_config.settings.iter() {
+            compiler.set(k, v)?;
+        }
+        for flag in self.compiler_config.flags.iter() {
+            compiler.enable(flag)?;
+        }
+
+        if let Some(cache_store) = &self.compiler_config.cache_store {
+            compiler.enable_incremental_compilation(cache_store.clone())?;
+        }
+
+        Ok((self, compiler.build()?))
+    }
+
+    /// Internal setting for whether adapter modules for components will have
+    /// extra WebAssembly instructions inserted performing more debug checks
+    /// then are necessary.
+    #[cfg(feature = "component-model")]
+    pub fn debug_adapter_modules(&mut self, debug: bool) -> &mut Self {
+        self.tunables.debug_adapter_modules = debug;
+        self
+    }
+
+    /// Enables clif output when compiling a WebAssembly module.
+    #[cfg(any(feature = "cranelift", feature = "winch"))]
+    pub fn emit_clif(&mut self, path: &Path) {
+        self.compiler_config.clif_dir = Some(path.to_path_buf());
+    }
+}
+
+fn round_up_to_pages(val: u64) -> u64 {
+    let page_size = wasmtime_runtime::page_size() as u64;
+    debug_assert!(page_size.is_power_of_two());
+    val.checked_add(page_size - 1)
+        .map(|val| val & !(page_size - 1))
+        .unwrap_or(u64::MAX / page_size + 1)
+}
+
+impl Default for Config {
+    fn default() -> Config {
+        Config::new()
+    }
+}
+
+impl fmt::Debug for Config {
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        let mut f = f.debug_struct("Config");
+        f.field("debug_info", &self.tunables.generate_native_debuginfo)
+            .field("parse_wasm_debuginfo", &self.tunables.parse_wasm_debuginfo)
+            .field("wasm_threads", &self.features.threads)
+            .field("wasm_reference_types", &self.features.reference_types)
+            .field(
+                "wasm_function_references",
+                &self.features.function_references,
+            )
+            .field("wasm_bulk_memory", &self.features.bulk_memory)
+            .field("wasm_simd", &self.features.simd)
+            .field("wasm_relaxed_simd", &self.features.relaxed_simd)
+            .field("wasm_multi_value", &self.features.multi_value)
+            .field(
+                "static_memory_maximum_size",
+                &(u64::from(self.tunables.static_memory_bound)
+                    * u64::from(wasmtime_environ::WASM_PAGE_SIZE)),
+            )
+            .field(
+                "static_memory_guard_size",
+                &self.tunables.static_memory_offset_guard_size,
+            )
+            .field(
+                "dynamic_memory_guard_size",
+                &self.tunables.dynamic_memory_offset_guard_size,
+            )
+            .field(
+                "guard_before_linear_memory",
+                &self.tunables.guard_before_linear_memory,
+            )
+            .field("parallel_compilation", &self.parallel_compilation);
+        #[cfg(any(feature = "cranelift", feature = "winch"))]
+        {
+            f.field("compiler_config", &self.compiler_config);
+        }
+        f.finish()
+    }
+}
+
+/// Possible Compilation strategies for a wasm module.
+///
+/// This is used as an argument to the [`Config::strategy`] method.
+#[non_exhaustive]
+#[derive(Clone, Debug, Copy)]
+pub enum Strategy {
+    /// An indicator that the compilation strategy should be automatically
+    /// selected.
+    ///
+    /// This is generally what you want for most projects and indicates that the
+    /// `wasmtime` crate itself should make the decision about what the best
+    /// code generator for a wasm module is.
+    ///
+    /// Currently this always defaults to Cranelift, but the default value may
+    /// change over time.
+    Auto,
+
+    /// Currently the default backend, Cranelift aims to be a reasonably fast
+    /// code generator which generates high quality machine code.
+    Cranelift,
+
+    /// A baseline compiler for WebAssembly, currently under active development and not ready for
+    /// production applications.
+    Winch,
+}
+
+/// Possible optimization levels for the Cranelift codegen backend.
+#[non_exhaustive]
+#[derive(Clone, Debug, Serialize, Deserialize, Eq, PartialEq)]
+pub enum OptLevel {
+    /// No optimizations performed, minimizes compilation time by disabling most
+    /// optimizations.
+    None,
+    /// Generates the fastest possible code, but may take longer.
+    Speed,
+    /// Similar to `speed`, but also performs transformations aimed at reducing
+    /// code size.
+    SpeedAndSize,
+}
+
+/// Select which profiling technique to support.
+#[derive(Debug, Clone, Copy, PartialEq)]
+pub enum ProfilingStrategy {
+    /// No profiler support.
+    None,
+
+    /// Collect function name information as the "perf map" file format, used with `perf` on Linux.
+    PerfMap,
+
+    /// Collect profiling info for "jitdump" file format, used with `perf` on
+    /// Linux.
+    JitDump,
+
+    /// Collect profiling info using the "ittapi", used with `VTune` on Linux.
+    VTune,
+}
+
+/// Select how wasm backtrace detailed information is handled.
+#[derive(Debug, Clone, Copy)]
+pub enum WasmBacktraceDetails {
+    /// Support is unconditionally enabled and wasmtime will parse and read
+    /// debug information.
+    Enable,
+
+    /// Support is disabled, and wasmtime will not parse debug information for
+    /// backtrace details.
+    Disable,
+
+    /// Support for backtrace details is conditional on the
+    /// `WASMTIME_BACKTRACE_DETAILS` environment variable.
+    Environment,
+}
+
+/// Configuration options used with [`InstanceAllocationStrategy::Pooling`] to
+/// change the behavior of the pooling instance allocator.
+///
+/// This structure has a builder-style API in the same manner as [`Config`] and
+/// is configured with [`Config::allocation_strategy`].
+#[cfg(feature = "pooling-allocator")]
+#[derive(Debug, Clone, Default)]
+pub struct PoolingAllocationConfig {
+    config: wasmtime_runtime::PoolingInstanceAllocatorConfig,
+}
+
+#[cfg(feature = "pooling-allocator")]
+impl PoolingAllocationConfig {
+    /// Configures the maximum number of "unused warm slots" to retain in the
+    /// pooling allocator.
+    ///
+    /// The pooling allocator operates over slots to allocate from, and each
+    /// slot is considered "cold" if it's never been used before or "warm" if
+    /// it's been used by some module in the past. Slots in the pooling
+    /// allocator additionally track an "affinity" flag to a particular core
+    /// wasm module. When a module is instantiated into a slot then the slot is
+    /// considered affine to that module, even after the instance has been
+    /// dealloocated.
+    ///
+    /// When a new instance is created then a slot must be chosen, and the
+    /// current algorithm for selecting a slot is:
+    ///
+    /// * If there are slots that are affine to the module being instantiated,
+    ///   then the most recently used slot is selected to be allocated from.
+    ///   This is done to improve reuse of resources such as memory mappings and
+    ///   additionally try to benefit from temporal locality for things like
+    ///   caches.
+    ///
+    /// * Otherwise if there are more than N affine slots to other modules, then
+    ///   one of those affine slots is chosen to be allocated. The slot chosen
+    ///   is picked on a least-recently-used basis.
+    ///
+    /// * Finally, if there are less than N affine slots to other modules, then
+    ///   the non-affine slots are allocated from.
+    ///
+    /// This setting, `max_unused_warm_slots`, is the value for N in the above
+    /// algorithm. The purpose of this setting is to have a knob over the RSS
+    /// impact of "unused slots" for a long-running wasm server.
+    ///
+    /// If this setting is set to 0, for example, then affine slots are
+    /// aggressively resused on a least-recently-used basis. A "cold" slot is
+    /// only used if there are no affine slots available to allocate from. This
+    /// means that the set of slots used over the lifetime of a program is the
+    /// same as the maximum concurrent number of wasm instances.
+    ///
+    /// If this setting is set to infinity, however, then cold slots are
+    /// prioritized to be allocated from. This means that the set of slots used
+    /// over the lifetime of a program will approach
+    /// [`PoolingAllocationConfig::instance_count`], or the maximum number of
+    /// slots in the pooling allocator.
+    ///
+    /// Wasmtime does not aggressively decommit all resources associated with a
+    /// slot when the slot is not in use. For example the
+    /// [`PoolingAllocationConfig::linear_memory_keep_resident`] option can be
+    /// used to keep memory associated with a slot, even when it's not in use.
+    /// This means that the total set of used slots in the pooling instance
+    /// allocator can impact the overall RSS usage of a program.
+    ///
+    /// The default value for this option is 100.
+    pub fn max_unused_warm_slots(&mut self, max: u32) -> &mut Self {
+        self.config.max_unused_warm_slots = max;
+        self
+    }
+
+    /// Configures whether or not stacks used for async futures are reset to
+    /// zero after usage.
+    ///
+    /// When the [`async_support`](Config::async_support) method is enabled for
+    /// Wasmtime and the [`call_async`] variant
+    /// of calling WebAssembly is used then Wasmtime will create a separate
+    /// runtime execution stack for each future produced by [`call_async`].
+    /// During the deallocation process Wasmtime won't by default reset the
+    /// contents of the stack back to zero.
+    ///
+    /// When this option is enabled it can be seen as a defense-in-depth
+    /// mechanism to reset a stack back to zero. This is not required for
+    /// correctness and can be a costly operation in highly concurrent
+    /// environments due to modifications of the virtual address space requiring
+    /// process-wide synchronization.
+    ///
+    /// This option defaults to `false`.
+    ///
+    /// [`call_async`]: crate::TypedFunc::call_async
+    #[cfg(feature = "async")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
+    pub fn async_stack_zeroing(&mut self, enable: bool) -> &mut Self {
+        self.config.async_stack_zeroing = enable;
+        self
+    }
+
+    /// How much memory, in bytes, to keep resident for async stacks allocated
+    /// with the pooling allocator.
+    ///
+    /// When [`PoolingAllocationConfig::async_stack_zeroing`] is enabled then
+    /// Wasmtime will reset the contents of async stacks back to zero upon
+    /// deallocation. This option can be used to perform the zeroing operation
+    /// with `memset` up to a certain threshold of bytes instead of using system
+    /// calls to reset the stack to zero.
+    ///
+    /// Note that when using this option the memory with async stacks will
+    /// never be decommitted.
+    #[cfg(feature = "async")]
+    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
+    pub fn async_stack_keep_resident(&mut self, size: usize) -> &mut Self {
+        let size = round_up_to_pages(size as u64) as usize;
+        self.config.async_stack_keep_resident = size;
+        self
+    }
+
+    /// How much memory, in bytes, to keep resident for each linear memory
+    /// after deallocation.
+    ///
+    /// This option is only applicable on Linux and has no effect on other
+    /// platforms.
+    ///
+    /// By default Wasmtime will use `madvise` to reset the entire contents of
+    /// linear memory back to zero when a linear memory is deallocated. This
+    /// option can be used to use `memset` instead to set memory back to zero
+    /// which can, in some configurations, reduce the number of page faults
+    /// taken when a slot is reused.
+    pub fn linear_memory_keep_resident(&mut self, size: usize) -> &mut Self {
+        let size = round_up_to_pages(size as u64) as usize;
+        self.config.linear_memory_keep_resident = size;
+        self
+    }
+
+    /// How much memory, in bytes, to keep resident for each table after
+    /// deallocation.
+    ///
+    /// This option is only applicable on Linux and has no effect on other
+    /// platforms.
+    ///
+    /// This option is the same as
+    /// [`PoolingAllocationConfig::linear_memory_keep_resident`] except that it
+    /// is applicable to tables instead.
+    pub fn table_keep_resident(&mut self, size: usize) -> &mut Self {
+        let size = round_up_to_pages(size as u64) as usize;
+        self.config.table_keep_resident = size;
+        self
+    }
+
+    /// The maximum number of concurrent instances supported (default is 1000).
+    ///
+    /// This value has a direct impact on the amount of memory allocated by the pooling
+    /// instance allocator.
+    ///
+    /// The pooling instance allocator allocates three memory pools with sizes depending on this value:
+    ///
+    /// * An instance pool, where each entry in the pool can store the runtime representation
+    ///   of an instance, including a maximal `VMContext` structure.
+    ///
+    /// * A memory pool, where each entry in the pool contains the reserved address space for each
+    ///   linear memory supported by an instance.
+    ///
+    /// * A table pool, where each entry in the pool contains the space needed for each WebAssembly table
+    ///   supported by an instance (see `table_elements` to control the size of each table).
+    ///
+    /// Additionally, this value will also control the maximum number of execution stacks allowed for
+    /// asynchronous execution (one per instance), when enabled.
+    ///
+    /// The memory pool will reserve a large quantity of host process address space to elide the bounds
+    /// checks required for correct WebAssembly memory semantics. Even for 64-bit address spaces, the
+    /// address space is limited when dealing with a large number of supported instances.
+    ///
+    /// For example, on Linux x86_64, the userland address space limit is 128 TiB. That might seem like a lot,
+    /// but each linear memory will *reserve* 6 GiB of space by default. Multiply that by the number of linear
+    /// memories each instance supports and then by the number of supported instances and it becomes apparent
+    /// that address space can be exhausted depending on the number of supported instances.
+    pub fn instance_count(&mut self, count: u32) -> &mut Self {
+        self.config.limits.count = count;
+        self
+    }
+
+    /// The maximum size, in bytes, allocated for an instance and its
+    /// `VMContext`.
+    ///
+    /// This amount of space is pre-allocated for `count` number of instances
+    /// and is used to store the runtime `wasmtime_runtime::Instance` structure
+    /// along with its adjacent `VMContext` structure. The `Instance` type has a
+    /// static size but `VMContext` is dynamically sized depending on the module
+    /// being instantiated. This size limit loosely correlates to the size of
+    /// the wasm module, taking into account factors such as:
+    ///
+    /// * number of functions
+    /// * number of globals
+    /// * number of memories
+    /// * number of tables
+    /// * number of function types
+    ///
+    /// If the allocated size per instance is too small then instantiation of a
+    /// module will fail at runtime with an error indicating how many bytes were
+    /// needed. This amount of bytes are committed to memory per-instance when
+    /// a pooling allocator is created.
+    ///
+    /// The default value for this is 1MB.
+    pub fn instance_size(&mut self, size: usize) -> &mut Self {
+        self.config.limits.size = size;
+        self
+    }
+
+    /// The maximum number of defined tables for a module (default is 1).
+    ///
+    /// This value controls the capacity of the `VMTableDefinition` table in each instance's
+    /// `VMContext` structure.
+    ///
+    /// The allocated size of the table will be `tables * sizeof(VMTableDefinition)` for each
+    /// instance regardless of how many tables are defined by an instance's module.
+    pub fn instance_tables(&mut self, tables: u32) -> &mut Self {
+        self.config.limits.tables = tables;
+        self
+    }
+
+    /// The maximum table elements for any table defined in a module (default is 10000).
+    ///
+    /// If a table's minimum element limit is greater than this value, the module will
+    /// fail to instantiate.
+    ///
+    /// If a table's maximum element limit is unbounded or greater than this value,
+    /// the maximum will be `table_elements` for the purpose of any `table.grow` instruction.
+    ///
+    /// This value is used to reserve the maximum space for each supported table; table elements
+    /// are pointer-sized in the Wasmtime runtime.  Therefore, the space reserved for each instance
+    /// is `tables * table_elements * sizeof::<*const ()>`.
+    pub fn instance_table_elements(&mut self, elements: u32) -> &mut Self {
+        self.config.limits.table_elements = elements;
+        self
+    }
+
+    /// The maximum number of defined linear memories for a module (default is 1).
+    ///
+    /// This value controls the capacity of the `VMMemoryDefinition` table in each instance's
+    /// `VMContext` structure.
+    ///
+    /// The allocated size of the table will be `memories * sizeof(VMMemoryDefinition)` for each
+    /// instance regardless of how many memories are defined by an instance's module.
+    pub fn instance_memories(&mut self, memories: u32) -> &mut Self {
+        self.config.limits.memories = memories;
+        self
+    }
+
+    /// The maximum number of pages for any linear memory defined in a module (default is 160).
+    ///
+    /// The default of 160 means at most 10 MiB of host memory may be committed for each instance.
+    ///
+    /// If a memory's minimum page limit is greater than this value, the module will
+    /// fail to instantiate.
+    ///
+    /// If a memory's maximum page limit is unbounded or greater than this value,
+    /// the maximum will be `memory_pages` for the purpose of any `memory.grow` instruction.
+    ///
+    /// This value is used to control the maximum accessible space for each linear memory of an instance.
+    ///
+    /// The reservation size of each linear memory is controlled by the
+    /// `static_memory_maximum_size` setting and this value cannot
+    /// exceed the configured static memory maximum size.
+    pub fn instance_memory_pages(&mut self, pages: u64) -> &mut Self {
+        self.config.limits.memory_pages = pages;
+        self
+    }
+}
+
+pub(crate) fn probestack_supported(arch: Architecture) -> bool {
+    matches!(
+        arch,
+        Architecture::X86_64 | Architecture::Aarch64(_) | Architecture::Riscv64(_)
+    )
+}