reflexion 0.1.12 → 0.1.13

data/src/physics/Box2D/Dynamics/Joints/b2WheelJoint.h

@@ -1,210 +0,0 @@
-/*
-* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org
-*
-* This software is provided 'as-is', without any express or implied
-* warranty.  In no event will the authors be held liable for any damages
-* arising from the use of this software.
-* Permission is granted to anyone to use this software for any purpose,
-* including commercial applications, and to alter it and redistribute it
-* freely, subject to the following restrictions:
-* 1. The origin of this software must not be misrepresented; you must not
-* claim that you wrote the original software. If you use this software
-* in a product, an acknowledgment in the product documentation would be
-* appreciated but is not required.
-* 2. Altered source versions must be plainly marked as such, and must not be
-* misrepresented as being the original software.
-* 3. This notice may not be removed or altered from any source distribution.
-*/
-
-#ifndef B2_WHEEL_JOINT_H
-#define B2_WHEEL_JOINT_H
-
-#include <Box2D/Dynamics/Joints/b2Joint.h>
-
-/// Wheel joint definition. This requires defining a line of
-/// motion using an axis and an anchor point. The definition uses local
-/// anchor points and a local axis so that the initial configuration
-/// can violate the constraint slightly. The joint translation is zero
-/// when the local anchor points coincide in world space. Using local
-/// anchors and a local axis helps when saving and loading a game.
-struct b2WheelJointDef : public b2JointDef
-{
-	b2WheelJointDef()
-	{
-		type = e_wheelJoint;
-		localAnchorA.SetZero();
-		localAnchorB.SetZero();
-		localAxisA.Set(1.0f, 0.0f);
-		enableMotor = false;
-		maxMotorTorque = 0.0f;
-		motorSpeed = 0.0f;
-		frequencyHz = 2.0f;
-		dampingRatio = 0.7f;
-	}
-
-	/// Initialize the bodies, anchors, axis, and reference angle using the world
-	/// anchor and world axis.
-	void Initialize(b2Body* bodyA, b2Body* bodyB, const b2Vec2& anchor, const b2Vec2& axis);
-
-	/// The local anchor point relative to bodyA's origin.
-	b2Vec2 localAnchorA;
-
-	/// The local anchor point relative to bodyB's origin.
-	b2Vec2 localAnchorB;
-
-	/// The local translation axis in bodyA.
-	b2Vec2 localAxisA;
-
-	/// Enable/disable the joint motor.
-	bool enableMotor;
-
-	/// The maximum motor torque, usually in N-m.
-	float32 maxMotorTorque;
-
-	/// The desired motor speed in radians per second.
-	float32 motorSpeed;
-
-	/// Suspension frequency, zero indicates no suspension
-	float32 frequencyHz;
-
-	/// Suspension damping ratio, one indicates critical damping
-	float32 dampingRatio;
-};
-
-/// A wheel joint. This joint provides two degrees of freedom: translation
-/// along an axis fixed in bodyA and rotation in the plane. In other words, it is a point to
-/// line constraint with a rotational motor and a linear spring/damper.
-/// This joint is designed for vehicle suspensions.
-class b2WheelJoint : public b2Joint
-{
-public:
-	b2Vec2 GetAnchorA() const;
-	b2Vec2 GetAnchorB() const;
-
-	b2Vec2 GetReactionForce(float32 inv_dt) const;
-	float32 GetReactionTorque(float32 inv_dt) const;
-
-	/// The local anchor point relative to bodyA's origin.
-	const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; }
-
-	/// The local anchor point relative to bodyB's origin.
-	const b2Vec2& GetLocalAnchorB() const  { return m_localAnchorB; }
-
-	/// The local joint axis relative to bodyA.
-	const b2Vec2& GetLocalAxisA() const { return m_localXAxisA; }
-
-	/// Get the current joint translation, usually in meters.
-	float32 GetJointTranslation() const;
-
-	/// Get the current joint translation speed, usually in meters per second.
-	float32 GetJointSpeed() const;
-
-	/// Is the joint motor enabled?
-	bool IsMotorEnabled() const;
-
-	/// Enable/disable the joint motor.
-	void EnableMotor(bool flag);
-
-	/// Set the motor speed, usually in radians per second.
-	void SetMotorSpeed(float32 speed);
-
-	/// Get the motor speed, usually in radians per second.
-	float32 GetMotorSpeed() const;
-
-	/// Set/Get the maximum motor force, usually in N-m.
-	void SetMaxMotorTorque(float32 torque);
-	float32 GetMaxMotorTorque() const;
-
-	/// Get the current motor torque given the inverse time step, usually in N-m.
-	float32 GetMotorTorque(float32 inv_dt) const;
-
-	/// Set/Get the spring frequency in hertz. Setting the frequency to zero disables the spring.
-	void SetSpringFrequencyHz(float32 hz);
-	float32 GetSpringFrequencyHz() const;
-
-	/// Set/Get the spring damping ratio
-	void SetSpringDampingRatio(float32 ratio);
-	float32 GetSpringDampingRatio() const;
-
-	/// Dump to b2Log
-	void Dump();
-
-protected:
-
-	friend class b2Joint;
-	b2WheelJoint(const b2WheelJointDef* def);
-
-	void InitVelocityConstraints(const b2SolverData& data);
-	void SolveVelocityConstraints(const b2SolverData& data);
-	bool SolvePositionConstraints(const b2SolverData& data);
-
-	float32 m_frequencyHz;
-	float32 m_dampingRatio;
-
-	// Solver shared
-	b2Vec2 m_localAnchorA;
-	b2Vec2 m_localAnchorB;
-	b2Vec2 m_localXAxisA;
-	b2Vec2 m_localYAxisA;
-
-	float32 m_impulse;
-	float32 m_motorImpulse;
-	float32 m_springImpulse;
-
-	float32 m_maxMotorTorque;
-	float32 m_motorSpeed;
-	bool m_enableMotor;
-
-	// Solver temp
-	int32 m_indexA;
-	int32 m_indexB;
-	b2Vec2 m_localCenterA;
-	b2Vec2 m_localCenterB;
-	float32 m_invMassA;
-	float32 m_invMassB;
-	float32 m_invIA;
-	float32 m_invIB;
-
-	b2Vec2 m_ax, m_ay;
-	float32 m_sAx, m_sBx;
-	float32 m_sAy, m_sBy;
-
-	float32 m_mass;
-	float32 m_motorMass;
-	float32 m_springMass;
-
-	float32 m_bias;
-	float32 m_gamma;
-};
-
-inline float32 b2WheelJoint::GetMotorSpeed() const
-{
-	return m_motorSpeed;
-}
-
-inline float32 b2WheelJoint::GetMaxMotorTorque() const
-{
-	return m_maxMotorTorque;
-}
-
-inline void b2WheelJoint::SetSpringFrequencyHz(float32 hz)
-{
-	m_frequencyHz = hz;
-}
-
-inline float32 b2WheelJoint::GetSpringFrequencyHz() const
-{
-	return m_frequencyHz;
-}
-
-inline void b2WheelJoint::SetSpringDampingRatio(float32 ratio)
-{
-	m_dampingRatio = ratio;
-}
-
-inline float32 b2WheelJoint::GetSpringDampingRatio() const
-{
-	return m_dampingRatio;
-}
-
-#endif