reflexion 0.1.12 → 0.1.13

data/src/physics/Box2D/Dynamics/Joints/b2RopeJoint.cpp

@@ -1,241 +0,0 @@
-/*
-* Copyright (c) 2007-2011 Erin Catto http://www.box2d.org
-*
-* This software is provided 'as-is', without any express or implied
-* warranty.  In no event will the authors be held liable for any damages
-* arising from the use of this software.
-* Permission is granted to anyone to use this software for any purpose,
-* including commercial applications, and to alter it and redistribute it
-* freely, subject to the following restrictions:
-* 1. The origin of this software must not be misrepresented; you must not
-* claim that you wrote the original software. If you use this software
-* in a product, an acknowledgment in the product documentation would be
-* appreciated but is not required.
-* 2. Altered source versions must be plainly marked as such, and must not be
-* misrepresented as being the original software.
-* 3. This notice may not be removed or altered from any source distribution.
-*/
-
-#include <Box2D/Dynamics/Joints/b2RopeJoint.h>
-#include <Box2D/Dynamics/b2Body.h>
-#include <Box2D/Dynamics/b2TimeStep.h>
-
-
-// Limit:
-// C = norm(pB - pA) - L
-// u = (pB - pA) / norm(pB - pA)
-// Cdot = dot(u, vB + cross(wB, rB) - vA - cross(wA, rA))
-// J = [-u -cross(rA, u) u cross(rB, u)]
-// K = J * invM * JT
-//   = invMassA + invIA * cross(rA, u)^2 + invMassB + invIB * cross(rB, u)^2
-
-b2RopeJoint::b2RopeJoint(const b2RopeJointDef* def)
-: b2Joint(def)
-{
-	m_localAnchorA = def->localAnchorA;
-	m_localAnchorB = def->localAnchorB;
-
-	m_maxLength = def->maxLength;
-
-	m_mass = 0.0f;
-	m_impulse = 0.0f;
-	m_state = e_inactiveLimit;
-	m_length = 0.0f;
-}
-
-void b2RopeJoint::InitVelocityConstraints(const b2SolverData& data)
-{
-	m_indexA = m_bodyA->m_islandIndex;
-	m_indexB = m_bodyB->m_islandIndex;
-	m_localCenterA = m_bodyA->m_sweep.localCenter;
-	m_localCenterB = m_bodyB->m_sweep.localCenter;
-	m_invMassA = m_bodyA->m_invMass;
-	m_invMassB = m_bodyB->m_invMass;
-	m_invIA = m_bodyA->m_invI;
-	m_invIB = m_bodyB->m_invI;
-
-	b2Vec2 cA = data.positions[m_indexA].c;
-	float32 aA = data.positions[m_indexA].a;
-	b2Vec2 vA = data.velocities[m_indexA].v;
-	float32 wA = data.velocities[m_indexA].w;
-
-	b2Vec2 cB = data.positions[m_indexB].c;
-	float32 aB = data.positions[m_indexB].a;
-	b2Vec2 vB = data.velocities[m_indexB].v;
-	float32 wB = data.velocities[m_indexB].w;
-
-	b2Rot qA(aA), qB(aB);
-
-	m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA);
-	m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB);
-	m_u = cB + m_rB - cA - m_rA;
-
-	m_length = m_u.Length();
-
-	float32 C = m_length - m_maxLength;
-	if (C > 0.0f)
-	{
-		m_state = e_atUpperLimit;
-	}
-	else
-	{
-		m_state = e_inactiveLimit;
-	}
-
-	if (m_length > b2_linearSlop)
-	{
-		m_u *= 1.0f / m_length;
-	}
-	else
-	{
-		m_u.SetZero();
-		m_mass = 0.0f;
-		m_impulse = 0.0f;
-		return;
-	}
-
-	// Compute effective mass.
-	float32 crA = b2Cross(m_rA, m_u);
-	float32 crB = b2Cross(m_rB, m_u);
-	float32 invMass = m_invMassA + m_invIA * crA * crA + m_invMassB + m_invIB * crB * crB;
-
-	m_mass = invMass != 0.0f ? 1.0f / invMass : 0.0f;
-
-	if (data.step.warmStarting)
-	{
-		// Scale the impulse to support a variable time step.
-		m_impulse *= data.step.dtRatio;
-
-		b2Vec2 P = m_impulse * m_u;
-		vA -= m_invMassA * P;
-		wA -= m_invIA * b2Cross(m_rA, P);
-		vB += m_invMassB * P;
-		wB += m_invIB * b2Cross(m_rB, P);
-	}
-	else
-	{
-		m_impulse = 0.0f;
-	}
-
-	data.velocities[m_indexA].v = vA;
-	data.velocities[m_indexA].w = wA;
-	data.velocities[m_indexB].v = vB;
-	data.velocities[m_indexB].w = wB;
-}
-
-void b2RopeJoint::SolveVelocityConstraints(const b2SolverData& data)
-{
-	b2Vec2 vA = data.velocities[m_indexA].v;
-	float32 wA = data.velocities[m_indexA].w;
-	b2Vec2 vB = data.velocities[m_indexB].v;
-	float32 wB = data.velocities[m_indexB].w;
-
-	// Cdot = dot(u, v + cross(w, r))
-	b2Vec2 vpA = vA + b2Cross(wA, m_rA);
-	b2Vec2 vpB = vB + b2Cross(wB, m_rB);
-	float32 C = m_length - m_maxLength;
-	float32 Cdot = b2Dot(m_u, vpB - vpA);
-
-	// Predictive constraint.
-	if (C < 0.0f)
-	{
-		Cdot += data.step.inv_dt * C;
-	}
-
-	float32 impulse = -m_mass * Cdot;
-	float32 oldImpulse = m_impulse;
-	m_impulse = b2Min(0.0f, m_impulse + impulse);
-	impulse = m_impulse - oldImpulse;
-
-	b2Vec2 P = impulse * m_u;
-	vA -= m_invMassA * P;
-	wA -= m_invIA * b2Cross(m_rA, P);
-	vB += m_invMassB * P;
-	wB += m_invIB * b2Cross(m_rB, P);
-
-	data.velocities[m_indexA].v = vA;
-	data.velocities[m_indexA].w = wA;
-	data.velocities[m_indexB].v = vB;
-	data.velocities[m_indexB].w = wB;
-}
-
-bool b2RopeJoint::SolvePositionConstraints(const b2SolverData& data)
-{
-	b2Vec2 cA = data.positions[m_indexA].c;
-	float32 aA = data.positions[m_indexA].a;
-	b2Vec2 cB = data.positions[m_indexB].c;
-	float32 aB = data.positions[m_indexB].a;
-
-	b2Rot qA(aA), qB(aB);
-
-	b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA);
-	b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB);
-	b2Vec2 u = cB + rB - cA - rA;
-
-	float32 length = u.Normalize();
-	float32 C = length - m_maxLength;
-
-	C = b2Clamp(C, 0.0f, b2_maxLinearCorrection);
-
-	float32 impulse = -m_mass * C;
-	b2Vec2 P = impulse * u;
-
-	cA -= m_invMassA * P;
-	aA -= m_invIA * b2Cross(rA, P);
-	cB += m_invMassB * P;
-	aB += m_invIB * b2Cross(rB, P);
-
-	data.positions[m_indexA].c = cA;
-	data.positions[m_indexA].a = aA;
-	data.positions[m_indexB].c = cB;
-	data.positions[m_indexB].a = aB;
-
-	return length - m_maxLength < b2_linearSlop;
-}
-
-b2Vec2 b2RopeJoint::GetAnchorA() const
-{
-	return m_bodyA->GetWorldPoint(m_localAnchorA);
-}
-
-b2Vec2 b2RopeJoint::GetAnchorB() const
-{
-	return m_bodyB->GetWorldPoint(m_localAnchorB);
-}
-
-b2Vec2 b2RopeJoint::GetReactionForce(float32 inv_dt) const
-{
-	b2Vec2 F = (inv_dt * m_impulse) * m_u;
-	return F;
-}
-
-float32 b2RopeJoint::GetReactionTorque(float32 inv_dt) const
-{
-	B2_NOT_USED(inv_dt);
-	return 0.0f;
-}
-
-float32 b2RopeJoint::GetMaxLength() const
-{
-	return m_maxLength;
-}
-
-b2LimitState b2RopeJoint::GetLimitState() const
-{
-	return m_state;
-}
-
-void b2RopeJoint::Dump()
-{
-	int32 indexA = m_bodyA->m_islandIndex;
-	int32 indexB = m_bodyB->m_islandIndex;
-
-	b2Log("  b2RopeJointDef jd;\n");
-	b2Log("  jd.bodyA = bodies[%d];\n", indexA);
-	b2Log("  jd.bodyB = bodies[%d];\n", indexB);
-	b2Log("  jd.collideConnected = bool(%d);\n", m_collideConnected);
-	b2Log("  jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y);
-	b2Log("  jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y);
-	b2Log("  jd.maxLength = %.15lef;\n", m_maxLength);
-	b2Log("  joints[%d] = m_world->CreateJoint(&jd);\n", m_index);
-}

data/src/physics/Box2D/Dynamics/Joints/b2RopeJoint.h

@@ -1,114 +0,0 @@
-/*
-* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org
-*
-* This software is provided 'as-is', without any express or implied
-* warranty.  In no event will the authors be held liable for any damages
-* arising from the use of this software.
-* Permission is granted to anyone to use this software for any purpose,
-* including commercial applications, and to alter it and redistribute it
-* freely, subject to the following restrictions:
-* 1. The origin of this software must not be misrepresented; you must not
-* claim that you wrote the original software. If you use this software
-* in a product, an acknowledgment in the product documentation would be
-* appreciated but is not required.
-* 2. Altered source versions must be plainly marked as such, and must not be
-* misrepresented as being the original software.
-* 3. This notice may not be removed or altered from any source distribution.
-*/
-
-#ifndef B2_ROPE_JOINT_H
-#define B2_ROPE_JOINT_H
-
-#include <Box2D/Dynamics/Joints/b2Joint.h>
-
-/// Rope joint definition. This requires two body anchor points and
-/// a maximum lengths.
-/// Note: by default the connected objects will not collide.
-/// see collideConnected in b2JointDef.
-struct b2RopeJointDef : public b2JointDef
-{
-	b2RopeJointDef()
-	{
-		type = e_ropeJoint;
-		localAnchorA.Set(-1.0f, 0.0f);
-		localAnchorB.Set(1.0f, 0.0f);
-		maxLength = 0.0f;
-	}
-
-	/// The local anchor point relative to bodyA's origin.
-	b2Vec2 localAnchorA;
-
-	/// The local anchor point relative to bodyB's origin.
-	b2Vec2 localAnchorB;
-
-	/// The maximum length of the rope.
-	/// Warning: this must be larger than b2_linearSlop or
-	/// the joint will have no effect.
-	float32 maxLength;
-};
-
-/// A rope joint enforces a maximum distance between two points
-/// on two bodies. It has no other effect.
-/// Warning: if you attempt to change the maximum length during
-/// the simulation you will get some non-physical behavior.
-/// A model that would allow you to dynamically modify the length
-/// would have some sponginess, so I chose not to implement it
-/// that way. See b2DistanceJoint if you want to dynamically
-/// control length.
-class b2RopeJoint : public b2Joint
-{
-public:
-	b2Vec2 GetAnchorA() const;
-	b2Vec2 GetAnchorB() const;
-
-	b2Vec2 GetReactionForce(float32 inv_dt) const;
-	float32 GetReactionTorque(float32 inv_dt) const;
-
-	/// The local anchor point relative to bodyA's origin.
-	const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; }
-
-	/// The local anchor point relative to bodyB's origin.
-	const b2Vec2& GetLocalAnchorB() const  { return m_localAnchorB; }
-
-	/// Set/Get the maximum length of the rope.
-	void SetMaxLength(float32 length) { m_maxLength = length; }
-	float32 GetMaxLength() const;
-
-	b2LimitState GetLimitState() const;
-
-	/// Dump joint to dmLog
-	void Dump();
-
-protected:
-
-	friend class b2Joint;
-	b2RopeJoint(const b2RopeJointDef* data);
-
-	void InitVelocityConstraints(const b2SolverData& data);
-	void SolveVelocityConstraints(const b2SolverData& data);
-	bool SolvePositionConstraints(const b2SolverData& data);
-
-	// Solver shared
-	b2Vec2 m_localAnchorA;
-	b2Vec2 m_localAnchorB;
-	float32 m_maxLength;
-	float32 m_length;
-	float32 m_impulse;
-
-	// Solver temp
-	int32 m_indexA;
-	int32 m_indexB;
-	b2Vec2 m_u;
-	b2Vec2 m_rA;
-	b2Vec2 m_rB;
-	b2Vec2 m_localCenterA;
-	b2Vec2 m_localCenterB;
-	float32 m_invMassA;
-	float32 m_invMassB;
-	float32 m_invIA;
-	float32 m_invIB;
-	float32 m_mass;
-	b2LimitState m_state;
-};
-
-#endif

data/src/physics/Box2D/Dynamics/Joints/b2WeldJoint.cpp

@@ -1,344 +0,0 @@
-/*
-* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org
-*
-* This software is provided 'as-is', without any express or implied
-* warranty.  In no event will the authors be held liable for any damages
-* arising from the use of this software.
-* Permission is granted to anyone to use this software for any purpose,
-* including commercial applications, and to alter it and redistribute it
-* freely, subject to the following restrictions:
-* 1. The origin of this software must not be misrepresented; you must not
-* claim that you wrote the original software. If you use this software
-* in a product, an acknowledgment in the product documentation would be
-* appreciated but is not required.
-* 2. Altered source versions must be plainly marked as such, and must not be
-* misrepresented as being the original software.
-* 3. This notice may not be removed or altered from any source distribution.
-*/
-
-#include <Box2D/Dynamics/Joints/b2WeldJoint.h>
-#include <Box2D/Dynamics/b2Body.h>
-#include <Box2D/Dynamics/b2TimeStep.h>
-
-// Point-to-point constraint
-// C = p2 - p1
-// Cdot = v2 - v1
-//      = v2 + cross(w2, r2) - v1 - cross(w1, r1)
-// J = [-I -r1_skew I r2_skew ]
-// Identity used:
-// w k % (rx i + ry j) = w * (-ry i + rx j)
-
-// Angle constraint
-// C = angle2 - angle1 - referenceAngle
-// Cdot = w2 - w1
-// J = [0 0 -1 0 0 1]
-// K = invI1 + invI2
-
-void b2WeldJointDef::Initialize(b2Body* bA, b2Body* bB, const b2Vec2& anchor)
-{
-	bodyA = bA;
-	bodyB = bB;
-	localAnchorA = bodyA->GetLocalPoint(anchor);
-	localAnchorB = bodyB->GetLocalPoint(anchor);
-	referenceAngle = bodyB->GetAngle() - bodyA->GetAngle();
-}
-
-b2WeldJoint::b2WeldJoint(const b2WeldJointDef* def)
-: b2Joint(def)
-{
-	m_localAnchorA = def->localAnchorA;
-	m_localAnchorB = def->localAnchorB;
-	m_referenceAngle = def->referenceAngle;
-	m_frequencyHz = def->frequencyHz;
-	m_dampingRatio = def->dampingRatio;
-
-	m_impulse.SetZero();
-}
-
-void b2WeldJoint::InitVelocityConstraints(const b2SolverData& data)
-{
-	m_indexA = m_bodyA->m_islandIndex;
-	m_indexB = m_bodyB->m_islandIndex;
-	m_localCenterA = m_bodyA->m_sweep.localCenter;
-	m_localCenterB = m_bodyB->m_sweep.localCenter;
-	m_invMassA = m_bodyA->m_invMass;
-	m_invMassB = m_bodyB->m_invMass;
-	m_invIA = m_bodyA->m_invI;
-	m_invIB = m_bodyB->m_invI;
-
-	float32 aA = data.positions[m_indexA].a;
-	b2Vec2 vA = data.velocities[m_indexA].v;
-	float32 wA = data.velocities[m_indexA].w;
-
-	float32 aB = data.positions[m_indexB].a;
-	b2Vec2 vB = data.velocities[m_indexB].v;
-	float32 wB = data.velocities[m_indexB].w;
-
-	b2Rot qA(aA), qB(aB);
-
-	m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA);
-	m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB);
-
-	// J = [-I -r1_skew I r2_skew]
-	//     [ 0       -1 0       1]
-	// r_skew = [-ry; rx]
-
-	// Matlab
-	// K = [ mA+r1y^2*iA+mB+r2y^2*iB,  -r1y*iA*r1x-r2y*iB*r2x,          -r1y*iA-r2y*iB]
-	//     [  -r1y*iA*r1x-r2y*iB*r2x, mA+r1x^2*iA+mB+r2x^2*iB,           r1x*iA+r2x*iB]
-	//     [          -r1y*iA-r2y*iB,           r1x*iA+r2x*iB,                   iA+iB]
-
-	float32 mA = m_invMassA, mB = m_invMassB;
-	float32 iA = m_invIA, iB = m_invIB;
-
-	b2Mat33 K;
-	K.ex.x = mA + mB + m_rA.y * m_rA.y * iA + m_rB.y * m_rB.y * iB;
-	K.ey.x = -m_rA.y * m_rA.x * iA - m_rB.y * m_rB.x * iB;
-	K.ez.x = -m_rA.y * iA - m_rB.y * iB;
-	K.ex.y = K.ey.x;
-	K.ey.y = mA + mB + m_rA.x * m_rA.x * iA + m_rB.x * m_rB.x * iB;
-	K.ez.y = m_rA.x * iA + m_rB.x * iB;
-	K.ex.z = K.ez.x;
-	K.ey.z = K.ez.y;
-	K.ez.z = iA + iB;
-
-	if (m_frequencyHz > 0.0f)
-	{
-		K.GetInverse22(&m_mass);
-
-		float32 invM = iA + iB;
-		float32 m = invM > 0.0f ? 1.0f / invM : 0.0f;
-
-		float32 C = aB - aA - m_referenceAngle;
-
-		// Frequency
-		float32 omega = 2.0f * b2_pi * m_frequencyHz;
-
-		// Damping coefficient
-		float32 d = 2.0f * m * m_dampingRatio * omega;
-
-		// Spring stiffness
-		float32 k = m * omega * omega;
-
-		// magic formulas
-		float32 h = data.step.dt;
-		m_gamma = h * (d + h * k);
-		m_gamma = m_gamma != 0.0f ? 1.0f / m_gamma : 0.0f;
-		m_bias = C * h * k * m_gamma;
-
-		invM += m_gamma;
-		m_mass.ez.z = invM != 0.0f ? 1.0f / invM : 0.0f;
-	}
-	else if (K.ez.z == 0.0f)
-	{
-		K.GetInverse22(&m_mass);
-		m_gamma = 0.0f;
-		m_bias = 0.0f;
-	}
-	else
-	{
-		K.GetSymInverse33(&m_mass);
-		m_gamma = 0.0f;
-		m_bias = 0.0f;
-	}
-
-	if (data.step.warmStarting)
-	{
-		// Scale impulses to support a variable time step.
-		m_impulse *= data.step.dtRatio;
-
-		b2Vec2 P(m_impulse.x, m_impulse.y);
-
-		vA -= mA * P;
-		wA -= iA * (b2Cross(m_rA, P) + m_impulse.z);
-
-		vB += mB * P;
-		wB += iB * (b2Cross(m_rB, P) + m_impulse.z);
-	}
-	else
-	{
-		m_impulse.SetZero();
-	}
-
-	data.velocities[m_indexA].v = vA;
-	data.velocities[m_indexA].w = wA;
-	data.velocities[m_indexB].v = vB;
-	data.velocities[m_indexB].w = wB;
-}
-
-void b2WeldJoint::SolveVelocityConstraints(const b2SolverData& data)
-{
-	b2Vec2 vA = data.velocities[m_indexA].v;
-	float32 wA = data.velocities[m_indexA].w;
-	b2Vec2 vB = data.velocities[m_indexB].v;
-	float32 wB = data.velocities[m_indexB].w;
-
-	float32 mA = m_invMassA, mB = m_invMassB;
-	float32 iA = m_invIA, iB = m_invIB;
-
-	if (m_frequencyHz > 0.0f)
-	{
-		float32 Cdot2 = wB - wA;
-
-		float32 impulse2 = -m_mass.ez.z * (Cdot2 + m_bias + m_gamma * m_impulse.z);
-		m_impulse.z += impulse2;
-
-		wA -= iA * impulse2;
-		wB += iB * impulse2;
-
-		b2Vec2 Cdot1 = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA);
-
-		b2Vec2 impulse1 = -b2Mul22(m_mass, Cdot1);
-		m_impulse.x += impulse1.x;
-		m_impulse.y += impulse1.y;
-
-		b2Vec2 P = impulse1;
-
-		vA -= mA * P;
-		wA -= iA * b2Cross(m_rA, P);
-
-		vB += mB * P;
-		wB += iB * b2Cross(m_rB, P);
-	}
-	else
-	{
-		b2Vec2 Cdot1 = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA);
-		float32 Cdot2 = wB - wA;
-		b2Vec3 Cdot(Cdot1.x, Cdot1.y, Cdot2);
-
-		b2Vec3 impulse = -b2Mul(m_mass, Cdot);
-		m_impulse += impulse;
-
-		b2Vec2 P(impulse.x, impulse.y);
-
-		vA -= mA * P;
-		wA -= iA * (b2Cross(m_rA, P) + impulse.z);
-
-		vB += mB * P;
-		wB += iB * (b2Cross(m_rB, P) + impulse.z);
-	}
-
-	data.velocities[m_indexA].v = vA;
-	data.velocities[m_indexA].w = wA;
-	data.velocities[m_indexB].v = vB;
-	data.velocities[m_indexB].w = wB;
-}
-
-bool b2WeldJoint::SolvePositionConstraints(const b2SolverData& data)
-{
-	b2Vec2 cA = data.positions[m_indexA].c;
-	float32 aA = data.positions[m_indexA].a;
-	b2Vec2 cB = data.positions[m_indexB].c;
-	float32 aB = data.positions[m_indexB].a;
-
-	b2Rot qA(aA), qB(aB);
-
-	float32 mA = m_invMassA, mB = m_invMassB;
-	float32 iA = m_invIA, iB = m_invIB;
-
-	b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA);
-	b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB);
-
-	float32 positionError, angularError;
-
-	b2Mat33 K;
-	K.ex.x = mA + mB + rA.y * rA.y * iA + rB.y * rB.y * iB;
-	K.ey.x = -rA.y * rA.x * iA - rB.y * rB.x * iB;
-	K.ez.x = -rA.y * iA - rB.y * iB;
-	K.ex.y = K.ey.x;
-	K.ey.y = mA + mB + rA.x * rA.x * iA + rB.x * rB.x * iB;
-	K.ez.y = rA.x * iA + rB.x * iB;
-	K.ex.z = K.ez.x;
-	K.ey.z = K.ez.y;
-	K.ez.z = iA + iB;
-
-	if (m_frequencyHz > 0.0f)
-	{
-		b2Vec2 C1 =  cB + rB - cA - rA;
-
-		positionError = C1.Length();
-		angularError = 0.0f;
-
-		b2Vec2 P = -K.Solve22(C1);
-
-		cA -= mA * P;
-		aA -= iA * b2Cross(rA, P);
-
-		cB += mB * P;
-		aB += iB * b2Cross(rB, P);
-	}
-	else
-	{
-		b2Vec2 C1 =  cB + rB - cA - rA;
-		float32 C2 = aB - aA - m_referenceAngle;
-
-		positionError = C1.Length();
-		angularError = b2Abs(C2);
-
-		b2Vec3 C(C1.x, C1.y, C2);
-	
-		b2Vec3 impulse;
-		if (K.ez.z > 0.0f)
-		{
-			impulse = -K.Solve33(C);
-		}
-		else
-		{
-			b2Vec2 impulse2 = -K.Solve22(C1);
-			impulse.Set(impulse2.x, impulse2.y, 0.0f);
-		}
-
-		b2Vec2 P(impulse.x, impulse.y);
-
-		cA -= mA * P;
-		aA -= iA * (b2Cross(rA, P) + impulse.z);
-
-		cB += mB * P;
-		aB += iB * (b2Cross(rB, P) + impulse.z);
-	}
-
-	data.positions[m_indexA].c = cA;
-	data.positions[m_indexA].a = aA;
-	data.positions[m_indexB].c = cB;
-	data.positions[m_indexB].a = aB;
-
-	return positionError <= b2_linearSlop && angularError <= b2_angularSlop;
-}
-
-b2Vec2 b2WeldJoint::GetAnchorA() const
-{
-	return m_bodyA->GetWorldPoint(m_localAnchorA);
-}
-
-b2Vec2 b2WeldJoint::GetAnchorB() const
-{
-	return m_bodyB->GetWorldPoint(m_localAnchorB);
-}
-
-b2Vec2 b2WeldJoint::GetReactionForce(float32 inv_dt) const
-{
-	b2Vec2 P(m_impulse.x, m_impulse.y);
-	return inv_dt * P;
-}
-
-float32 b2WeldJoint::GetReactionTorque(float32 inv_dt) const
-{
-	return inv_dt * m_impulse.z;
-}
-
-void b2WeldJoint::Dump()
-{
-	int32 indexA = m_bodyA->m_islandIndex;
-	int32 indexB = m_bodyB->m_islandIndex;
-
-	b2Log("  b2WeldJointDef jd;\n");
-	b2Log("  jd.bodyA = bodies[%d];\n", indexA);
-	b2Log("  jd.bodyB = bodies[%d];\n", indexB);
-	b2Log("  jd.collideConnected = bool(%d);\n", m_collideConnected);
-	b2Log("  jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y);
-	b2Log("  jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y);
-	b2Log("  jd.referenceAngle = %.15lef;\n", m_referenceAngle);
-	b2Log("  jd.frequencyHz = %.15lef;\n", m_frequencyHz);
-	b2Log("  jd.dampingRatio = %.15lef;\n", m_dampingRatio);
-	b2Log("  joints[%d] = m_world->CreateJoint(&jd);\n", m_index);
-}