@oimlsmart/primmel-packages 0.1.0

package/oiml-r60/specification/tables.prl

@@ -0,0 +1,182 @@
+table mpe_tiers {
+  description "MPE tier breakpoints per accuracy class (R 60-1, Table 4)"
+  columns {
+    accuracy_class: string
+    load_min: number "v"
+    load_max: number "v"
+    limit_factor: number
+  }
+  data {
+    "A" 0 50000 0.5
+    "A" 50000 200000 1
+    "A" 200000 null 1.5
+    "B" 0 5000 0.5
+    "B" 5000 20000 1
+    "B" 20000 null 1.5
+    "C" 0 500 0.5
+    "C" 500 2000 1
+    "C" 2000 null 1.5
+    "D" 0 50 0.5
+    "D" 50 200 1
+    "D" 200 null 1.5
+  }
+}
+
+table test_runs {
+  description "Load applications per test point by accuracy class"
+  columns {
+    accuracy_class: string
+    runs: integer
+  }
+  data {
+    "A" 5
+    "B" 5
+    "C" 3
+    "D" 3
+  }
+}
+
+table temperature_increment {
+  description "MDLO evaluation temperature increment by accuracy class"
+  columns {
+    accuracy_class: string
+    increment: number "degC"
+  }
+  data {
+    "A" 2
+    "B" 5
+    "C" 5
+    "D" 5
+  }
+}
+
+table loading_stabilisation_times {
+  description "Combined loading and stabilisation times to be achieved prior to reading, by accuracy class and load-change magnitude (R 60-2, Table 1; loading/unloading ≈ half the time, remainder stabilisation, both recorded in absolute values)"
+  columns {
+    load_change_gt: number "kg"
+    load_change_max: number "kg"
+    class_cd: integer "s"
+    class_b: integer "s"
+    class_a: integer "s"
+  }
+  data {
+    0 10 10 15 20
+    10 100 20 30 40
+    100 1000 30 45 60
+    1000 10000 40 60 80
+    10000 100000 50 75 100
+    100000 null 60 90 120
+  }
+  ref derives-from "urn:oiml:pub:r:60-2:2021#clause-table-1"
+}
+
+table emc_severities {
+  description "EMC disturbance test severities (R 60-2, 2.10.7.x; IEC 61000-4 series)"
+  columns {
+    test: string
+    parameter: string
+    value: string
+    clause: string
+  }
+  data {
+    "bursts" "level" "3 (IEC 61000-4-4)" "2.10.7.6"
+    "bursts" "power_lines" "2 kV" "2.10.7.6"
+    "bursts" "signal_lines" "1 kV" "2.10.7.6"
+    "surge" "level" "3 (IEC 61000-4-5)" "2.10.7.7"
+    "surge" "line_to_line" "1 kV" "2.10.7.7"
+    "surge" "line_to_earth" "2 kV" "2.10.7.7"
+    "esd" "contact" "6 kV" "2.10.7.8"
+    "esd" "air" "8 kV" "2.10.7.8"
+    "rf_radiated" "field_strength" "10 V/m" "2.10.7.9"
+    "rf_radiated" "frequency_range" "80 MHz – 3000 MHz (26 MHz lower bound for cells without power/I/O lines)" "2.10.7.9"
+    "rf_conducted" "frequency_range" "0.15 – 80 MHz" "2.10.7.10"
+    "rf_conducted" "amplitude" "10 V (emf, 50 Ohm)" "2.10.7.10"
+    "short_time_reduction" "test_a" "0 % residual, 0.5 cycles" "2.10.7.5"
+    "short_time_reduction" "test_b" "0 % residual, 1 cycle" "2.10.7.5"
+    "short_time_reduction" "test_c" "40 % residual, 10 cycles" "2.10.7.5"
+    "short_time_reduction" "test_d" "70 % residual, 25 cycles" "2.10.7.5"
+    "short_time_reduction" "test_e" "80 % residual, 250 cycles" "2.10.7.5"
+    "short_time_reduction" "short_interruption" "0 % residual, 250 cycles" "2.10.7.5"
+  }
+  ref derives-from "urn:oiml:pub:r:60-2:2021#clause-2.10.7"
+}
+
+table profiles {
+  title "Per-dimension value bindings"
+  profiles {
+    profile mpe_tiers {
+      description "MPE tier breakpoints per accuracy class (R 60-1, Table 4)"
+      dimension accuracy_class
+      unit "v"
+      binding {
+        A: [{ min: 0 max: 50000 factor: 0.5 } { min: 50000 max: 200000 factor: 1 } { min: 200000 factor: 1.5 }]
+        B: [{ min: 0 max: 5000 factor: 0.5 } { min: 5000 max: 20000 factor: 1 } { min: 20000 factor: 1.5 }]
+        C: [{ min: 0 max: 500 factor: 0.5 } { min: 500 max: 2000 factor: 1 } { min: 2000 factor: 1.5 }]
+        D: [{ min: 0 max: 50 factor: 0.5 } { min: 50 max: 200 factor: 1 } { min: 200 factor: 1.5 }]
+      }
+    }
+    profile test_runs {
+      description "Load applications per test point"
+      dimension accuracy_class
+      type integer
+      binding {
+        A: 5
+        B: 5
+        C: 3
+        D: 3
+      }
+    }
+    profile temperature_increment {
+      description "MDLO evaluation temperature increment"
+      dimension accuracy_class
+      unit "°C"
+      type integer
+      binding {
+        A: 2
+        B: 5
+        C: 5
+        D: 5
+      }
+    }
+    profile n_LC_range {
+      description "Allowed verification interval range"
+      dimension accuracy_class
+      unit "intervals"
+      type range
+      binding {
+        A: { min: 50000 }
+        B: { min: 5000 max: 100000 }
+        C: { min: 500 max: 10000 }
+        D: { min: 100 max: 1000 }
+      }
+    }
+    profile p_LC_range {
+      description "Apportioning factor range (R 60-1, 5.3.2 declares 0.3–0.8 — see source_discrepancy for the legacy 0.3–1.0 binding)"
+      dimension technology
+      type range
+      source_discrepancy {
+        summary "Legacy value model carries analogue-passive p_LC 0.3–1.0; R 60-1, 5.3.2 declares 0.3 ≤ p_LC ≤ 0.8"
+        sources { "urn:oiml:pub:r:60-1:2021#clause-5.3.2" }
+        resolution follows_clause_x
+        rationale "The analogue-passive { min: 0.3, max: 1.0 } binding is the legacy value carried for provenance; R 60-1:2021, 5.3.2 declares 0.3 ≤ p_LC ≤ 0.8 and is canonical — enforced by /req/metrological/mpe and /req/electronic/p-lc-constraint. The dissenting side is the legacy data model itself, not a clause of the 2021 edition, so only the canonical clause is cited."
+      }
+      binding {
+        analogue-passive: { min: 0.3 max: 1 default: 0.7 }
+        analogue-active: { min: 0.7 max: 0.8 default: 0.7 }
+        digital: { min: 0.7 max: 0.8 default: 0.7 }
+      }
+    }
+    profile min_temperature_span {
+      description "Minimum special temperature range span"
+      dimension accuracy_class
+      unit "°C"
+      type integer
+      binding {
+        A: 5
+        B: 15
+        C: 30
+        D: 30
+      }
+    }
+  }
+}

package/oiml-r60/specification/test-sequences.prl

@@ -0,0 +1,72 @@
+# R 60 TEST SEQUENCES — required test ordering as data
+# -----------------------------------------------------------------------------
+# PROPOSAL.R60-SSOT-Phase9 item 5 (task 60; adopted by
+# analysis/response-3-r60-ssot-phase9.md with two scopings: (a) the linker
+# verifies the declared sequence itself — R39 test-sequence-integrity;
+# (b) runtime enforcement rides the admissibility path in
+# browser/src/services/test-run.service.ts — a sequence violation computes
+# INADMISSIBLE → INVALIDATED, never a fail, the task-29 doctrine).
+#
+# R 60-2 implies required test ordering on the same sample: the creep test
+# must follow the MDLO (measurement error / repeatability) test, and the
+# minimum dead load output return (DR) test must follow the creep test —
+# running creep before MDLO contaminates the baseline. Clause evidence
+# (verified against primmel-packages/oiml-r60/sources-prd/r60-2.sentences.json):
+#   2.10    — "the increasing and decreasing load, creep, repeatability, and
+#             minimum dead load output return tests can be conducted
+#             concurrently at the given test temperature before changing to
+#             the next test temperature (see 2.11, fig-2)"; the barometric
+#             pressure and humidity tests run individually AFTER these.
+#   2.11.1  — "The recommended test sequence for each test temperature when
+#             all tests are carried out in the same force-generating system
+#             is shown in fig-2."
+#   2.11.2  — "The recommended test sequence for each test temperature for
+#             the minimum dead load output return (DR) and creep tests … is
+#             shown in fig-3."
+#   2.9.2   — DR is defined as the difference between an initial D_min
+#             reading and a D_min reading taken AFTER the application of
+#             D_max (the creep loading) — the DR measurement is physically
+#             chained to the creep test on the same sample.
+# The temperature-cycling environment program (20 → T_high → T_low → 20) is
+# 2.10.1.13: "Repeat the operations described in 2.10.1.3, first at the
+# higher temperature, then at the lower temperature … then perform the
+# operations in 2.10.1.3 at 20 °C (± 2 °C)."
+#
+# Native construct (smart gap-close E10, kernel 801767e — the registry rode
+# the build-primmel-cache SUPPLEMENTAL list as hand-authored app config
+# before the kernel grew the construct). The YAML twin
+# data/<rec>/specification/test-sequences.yaml (schema
+# data/schemas/test-sequences.yaml) is GENERATED from this file. Linker:
+# R39 (browser/build/model-linker.ts). Runtime:
+# browser/src/data/test-sequences.ts.
+#
+# Step shape: a step carries `test` XOR `phase` (R39). Test steps reference
+# a declared conformance test of the standard and may carry
+# role: baseline | follow_up and depends_on: <order of an earlier step>.
+# Phase steps name an environment-program phase (no test ref) — legal only
+# in environment programs like temperature-cycling.
+
+test_sequence mdlo-creep-dr {
+  name "MDLO → Creep → DR sequence"
+  description "The three performance tests must run in this order on the same sample within the same lab visit: the MDLO test (measurement error, repeatability) establishes the baseline; creep follows it; the DR reading follows the creep loading (R 60-2, 2.10 + 2.11.1/2.11.2 — the recommended per-temperature sequence of fig-2/fig-3 — and 2.9.2, which defines DR against the D_max application of the creep test). Running creep before MDLO contaminates the baseline."
+  step 1 { test "/conf/metrological-tests/measurement-error-repeatability-mdlo" role baseline }
+  step 2 { test "/conf/metrological-tests/creep" role follow_up depends_on 1 }
+  step 3 { test "/conf/metrological-tests/dr" role follow_up depends_on 2 }
+  sample_applicability all
+  source { doc "urn:oiml:pub:r:60-2:2021" clause "2.10" }
+  source { doc "urn:oiml:pub:r:60-2:2021" clause "2.11.1" }
+  source { doc "urn:oiml:pub:r:60-2:2021" clause "2.11.2" }
+  source { doc "urn:oiml:pub:r:60-2:2021" clause "2.9.2" }
+}
+
+test_sequence temperature-cycling {
+  name "Temperature cycling (20 → T_high → T_low → 20)"
+  description "The environment program of the MDLO test: stabilize at the 20 °C reference, then the higher temperature, then the lower temperature, then return to 20 °C — the per-temperature operations of 2.10.1.3 run at each step (R 60-2, 2.10.1.13; concurrent conduct per temperature per 2.10). Phase-shaped steps carry no test ref; the program gates no run by itself — it orders the environment, not the tests."
+  step 1 { phase "20 °C reference" }
+  step 2 { phase "T_high" }
+  step 3 { phase "T_low" }
+  step 4 { phase "20 °C return" }
+  source { doc "urn:oiml:pub:r:60-2:2021" clause "2.10.1.13" }
+  source { doc "urn:oiml:pub:r:60-2:2021" clause "2.10" }
+}
+