@oimlsmart/primmel-packages 0.1.0

package/oiml-r144/specification/calculations.prl

@@ -0,0 +1,123 @@
+calculation measurementError {
+  name "measurementError"
+  identifier /calc/measurement-error
+  category metrological
+  description "Error: E = x_ind − x_ref (measured quantity value minus reference quantity value)"
+  inputs {
+    x_ind : number { unit "ppm" quantity_kind volume-fraction description "Indication (or mean of repeated indications)" range { min 0 } }
+    x_ref : number { unit "ppm" quantity_kind volume-fraction description "CGM certified reference value" range { min 0 } }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "e_x" description "Error of the gas analytical system" }
+  expression "ocl{x_ind - x_ref}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-2.13"
+}
+
+calculation relativeError {
+  name "relativeError"
+  identifier /calc/relative-error
+  category metrological
+  description "Relative error: E_rel = E / x_ref"
+  inputs {
+    e_x : number { unit "ppm" quantity_kind volume-fraction description "Absolute error" }
+    x_ref : number { unit "ppm" quantity_kind volume-fraction description "Reference value of the measurand" range { min 0 } }
+  }
+  output : number { unit "%" quantity_kind ratio name "e_rel" description "Relative error" }
+  expression "ocl{e_x / x_ref}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-2.15"
+}
+
+calculation mpeIntrinsic {
+  name "mpeIntrinsic"
+  identifier /calc/mpe-intrinsic
+  category metrological
+  description "Maximum permissible intrinsic error: max(2 ppm, 5 % of the measured value)"
+  inputs {
+    measured_value : number { unit "ppm" quantity_kind volume-fraction description "Measured volume fraction (CGM reference value at the test point)" range { min 0 } }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "mpe" description "Maximum permissible intrinsic error at this point" range { min 0 } }
+  expression "ocl{max(2, 0.05 * abs(measured_value))}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-4.3.1"
+}
+
+calculation mpeVerification {
+  name "mpeVerification"
+  identifier /calc/mpe-verification
+  category metrological
+  description "MPE on verification under rated operating conditions: max(5 ppm, 10 % of the measured value)"
+  inputs {
+    measured_value : number { unit "ppm" quantity_kind volume-fraction description "Measured volume fraction (CGM reference value at the test point)" range { min 0 } }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "mpe_v" description "Maximum permissible error under rated operating conditions at this point" range { min 0 } }
+  expression "ocl{max(5, 0.10 * abs(measured_value))}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-4.3.2"
+}
+
+calculation repeatabilityStdDev {
+  name "repeatabilityStdDev"
+  identifier /calc/repeatability-std-dev
+  category metrological
+  description "Estimated standard deviation: s = sqrt(Σ(Y_i − Ȳ)² / (n − 1)), n = 20"
+  inputs {
+    y_i : collection { unit "ppm" quantity_kind volume-fraction description "Series of n = 20 consecutive indications of the same CGM" }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "s" description "Estimated standard deviation" range { min 0 } }
+  expression "ocl{sqrt((y_i->collect(y | (y - y_i->average()) * (y - y_i->average()))->sum()) / (y_i->size() - 1))}"
+  ref derives-from "urn:oiml:pub:r:144-2:2013#clause-1.4"
+}
+
+calculation repeatabilityLimit {
+  name "repeatabilityLimit"
+  identifier /calc/repeatability-limit
+  category metrological
+  description "Repeatability limit: s_lim = MPE / 3 at the given point of the measuring range"
+  inputs {
+    measured_value : number { unit "ppm" quantity_kind volume-fraction description "CGM reference value at the test point" range { min 0 } }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "s_lim" description "Upper limit of the estimated standard deviation" range { min 0 } }
+  expression "ocl{max(2, 0.05 * abs(measured_value)) / 3}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-4.4"
+}
+
+calculation indicationVariation {
+  name "indicationVariation"
+  identifier /calc/indication-variation
+  category metrological
+  description "Variation of the indication under an influence quantity or interferent: Δx = x_with − x_without"
+  inputs {
+    indication_with : number { unit "ppm" quantity_kind volume-fraction description "Indication with the influence quantity / interferent applied" }
+    indication_without : number { unit "ppm" quantity_kind volume-fraction description "Indication without the influence quantity / interferent" }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "delta_x" description "Variation of the indication" }
+  expression "ocl{indication_with - indication_without}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-4.5.2"
+}
+
+calculation driftChange {
+  name "driftChange"
+  identifier /calc/drift-change
+  category metrological
+  description "Drift at a stated period: change in indication at a given CGM concentration (R 144-1, 2.23 NOTE)"
+  inputs {
+    indication_at_time : number { unit "ppm" quantity_kind volume-fraction description "Indication at time t of the drift period" range { min 0 } }
+    initial_indication : number { unit "ppm" quantity_kind volume-fraction description "Indication immediately after adjustment (t = 0)" range { min 0 } }
+  }
+  output : number { unit "ppm" quantity_kind volume-fraction name "drift_x" description "Change in indication over the stated period" }
+  expression "ocl{indication_at_time - initial_indication}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-2.23"
+}
+
+calculation rangeEnvelopeCheck {
+  name "rangeEnvelopeCheck"
+  identifier /calc/range-envelope-check
+  category metrological
+  description "Declared measuring range within the R 144-1, 4.2 envelope for the component"
+  inputs {
+    range_min : number { unit "ppm" quantity_kind volume-fraction description "Declared measuring range lower limit" range { min 0 } }
+    range_max : number { unit "ppm" quantity_kind volume-fraction description "Declared measuring range upper limit" range { min 0 } }
+    component : enum { description "Measured component" enum_values { CO NO NO2 } }
+  }
+  output : boolean { unit "1" name "within_envelope" description "Whether the declared range lies within the 4.2 envelope" }
+  expression "ocl{range_min >= lookupRange(component).min and range_max <= lookupRange(component).max}"
+  ref derives-from "urn:oiml:pub:r:144-1:2013#clause-4.2"
+}
+

package/oiml-r144/specification/conformance/examination.prl

@@ -0,0 +1,87 @@
+conformance_class /conf/examinations {
+  title "Examination conformance tests"
+  name "Examinations for gas analytical systems"
+  target /req/technical
+  subject "gas analytical system examination"
+  description "External examination and documentation review procedures for verifying compliance with the technical requirements of R 144-1, clauses 4–6, per R 144-1, 7.1.3 and R 144-3, 3.7, and the review of the compiled test report against the report content rules of R 144-3, clause 2."
+}
+
+conformance_test /conf/examinations/visual-examination {
+  name "Visual and technical examination"
+  purpose "Obtain a general appraisal of the design and construction of the gas analytical system and verify compliance with the requirements of R 144-1, clauses 4, 5 and 6 through external examination (the conformity sweep of R 144-1, 8.6), reported in the R 144-3, 3.7 table."
+  method "Examine each item listed in R 144-3, 3.7 against the requirements indicated in the operating manual; record the actual results and whether the item complies (yes/no), with comments. Where possible, examine the completely mounted system; separate units may be examined when the system cannot be examined as a whole (R 144-1, 7.1.3.1)."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:144-1:2013" clause "7.1.3" }
+  reference { doc "urn:oiml:pub:r:144-1:2013" clause "7.1.3.2" }
+  reference { doc "urn:oiml:pub:r:144-1:2013" clause "8.6" }
+  targets { /req/metrological/measurement-units /req/metrological/measuring-range /req/metrological/response-time /req/metrological/warm-up-time /req/technical/air-tightness /req/technical/corrosion-resistant /req/technical/gas-switching /req/technical/zero-gas-filter /req/technical/pump-mounting /req/technical/gas-flow-meter /req/technical/representative-sampling /req/technical/interface-peripherals /req/technical/interface-isolation /req/technical/indication-range /req/technical/analog-scale /req/technical/digital-display /req/technical/printing-device /req/technical/computing-device /req/technical/alarm-system /req/technical/gas-flow-monitoring /req/technical/readiness-indication /req/technical/sensor-expiry /req/technical/adjustment-facilities /req/technical/internal-adjustment /req/technical/negative-zero /req/technical/auto-adjustment-output /req/technical/adjustment-security /req/technical/mode-security /req/technical/inscriptions }
+  variables {
+    variable examination_items { type collection source measured description "Per-row R 144-3, 3.7 examination results (each row carries its item id and complies yes/no)" }
+    variable all_items_comply { type boolean source derived derivation "ocl{examination_items->forAll(i | i.complies)}" description "Every applicable R 144-3, 3.7 examination item complies" }
+  }
+  procedure {
+    1 "Examine design and construction against R 144-1, clauses 4–6"
+    2 "Record actual results and compliance per R 144-3, 3.7 row" outputs { examination_items all_items_comply }
+  }
+  acceptance_criteria {
+    type composite
+    pass_if "ocl{all_items_comply}"
+    criterion examination_criterion { target /req/technical/inscriptions pass_if "ocl{all_items_comply}" description "Every applicable R 144-3, 3.7 item complies" }
+  }
+  result_forms { 03-07-visual-examination }
+}
+
+conformance_test /conf/examinations/documentation {
+  name "Documentation review"
+  purpose "Verify the type evaluation documentation is complete (R 144-1, 7.1.1) and the operating manual clearly indicates the correct procedures, especially those of R 144-1, 6.2 (R 144-1, 7.1.3.4)."
+  method "Review the submitted documentation: description of the general principle of measurement; list and description of essential components with drawings and diagrams; general software information; formula for mass emission calculation; operating manual; manufacturer test details and results."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:144-1:2013" clause "7.1.1" }
+  targets { /req/technical/type-evaluation-documentation /req/technical/operating-manual }
+  variables {
+    variable principle_description { type boolean source measured description "General principle of measurement documented" }
+    variable component_descriptions { type boolean source measured description "Essential components listed and described with drawings/diagrams" }
+    variable software_information { type boolean source measured description "General software information provided" }
+    variable emission_formula { type boolean source measured description "Formula for mass emission calculation described" }
+    variable operating_manual_complete { type boolean source measured description "Operating manual covers R 144-1, 6.2 items" }
+    variable manufacturer_test_results { type boolean source measured description "Manufacturer test details/results provided" }
+  }
+  procedure {
+    1 "Check documentation against the R 144-1, 7.1.1 list" outputs { principle_description component_descriptions software_information emission_formula operating_manual_complete manufacturer_test_results }
+    2 "Verify operating manual procedures per R 144-1, 6.2 (7.1.3.4)" outputs { operating_manual_complete }
+  }
+  acceptance_criteria {
+    type composite
+    pass_if "ocl{documentation_criterion}"
+    criterion documentation_criterion { target /req/technical/type-evaluation-documentation pass_if "ocl{principle_description and component_descriptions and software_information and emission_formula and operating_manual_complete and manufacturer_test_results}" description "All R 144-1, 7.1.1 documentation items present" }
+  }
+  result_forms { documentation-examination }
+}
+
+conformance_test /conf/examinations/test-report-review {
+  name "Test report content review"
+  purpose "Verify the compiled test report satisfies the report content rules of R 144-3, clause 2: the recommended numbers of tests and test values are used in the OIML-CS framework, the test means used are indicated (with the necessary metrological and technical characteristics of any test means that did not conform to the Recommendation), the assurance of any alternative taken and the arguments or results demonstrating the equivalence of results are given, any problem (fault to be repaired) observed during the tests is mentioned, and the test conditions (ambient temperature, humidity, etc.) are indicated."
+  method "Review the compiled test report against the seven content rules of R 144-3, clause 2: the recommended numbers and values are used (the OIML-CS frame); every test identifies the test means used, and any test means not conforming to the Recommendation carry their necessary metrological and technical characteristics; any alternative the Recommendation offers carries the assurance of its requirements with the arguments or test results demonstrating the equivalence of results; observed problems (faults to be repaired) are mentioned in the per-test conclusions; the test conditions are indicated on the test forms' headers."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:144-3:2013" clause "2" }
+  targets { /req/report/cs-recommended-values /req/report/test-means-indication /req/report/alternative-assurance /req/report/test-observations }
+  variables {
+    variable recommended_values_used { type boolean source measured description "The recommended numbers of tests and test values are used in the OIML-CS framework (R 144-3, 2 s1)" }
+    variable test_means_indicated { type boolean source measured description "The test means used are indicated, with the necessary characteristics of any non-conforming means (R 144-3, 2 s2–s3)" }
+    variable alternatives_assured { type boolean source measured description "Alternatives carry the assurance of their requirements and the equivalence-of-results evidence (R 144-3, 2 s4–s5)" }
+    variable observations_recorded { type boolean source measured description "Observed problems and the test conditions are recorded (R 144-3, 2 s6–s7)" }
+  }
+  procedure {
+    1 "Review the compiled test report against the R 144-3, clause 2 content rules" outputs { recommended_values_used test_means_indicated alternatives_assured observations_recorded }
+  }
+  acceptance_criteria {
+    type composite
+    pass_if "ocl{report_content_criterion}"
+    criterion report_content_criterion { target /req/report/test-means-indication pass_if "ocl{recommended_values_used and test_means_indicated and alternatives_assured and observations_recorded}" description "Every R 144-3, clause 2 report content rule is satisfied" }
+  }
+  result_forms { 03-09-general-conclusion }
+}
+