@oimlsmart/primmel-packages 0.1.0

package/oiml-r129/sources-prd/r129-2.sentences.json

@@ -0,0 +1,1139 @@
+{
+  "prd_sentences": "0.1.0",
+  "document": {
+    "urn": "urn:oiml:pub:r:129-2:2020",
+    "short": "OIML R 129-2:2020",
+    "part": "2"
+  },
+  "sentences": [
+    {
+      "address": "clause-1/s1",
+      "fragment": "clause-1",
+      "clause": "1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "A type of instrument is presumed to comply with the requirements of R 129-1, 4.2, 4.3 and 4.4, if it has passed the examination and tests specified in Annex A."
+    },
+    {
+      "address": "clause-1.1.1/s1",
+      "fragment": "clause-1.1.1",
+      "clause": "1.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Submission of an instrument to a national metrology service for type evaluation shall be accompanied by sufficient technical information including drawings, specifications, photographs and descriptions to ensure complete understanding of the construction and method of operation of the instrument."
+    },
+    {
+      "address": "clause-1.1.1/s2",
+      "fragment": "clause-1.1.1",
+      "clause": "1.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Details of the measurement data contained in the memory and calculation methods shall also be provided."
+    },
+    {
+      "address": "clause-1.1.2/s1",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "This Recommendation does not ask manufacturers for extra declarations that the documentation is correct and complete; however, any country may require this declaration, as a part of the specified software examination process."
+    },
+    {
+      "address": "clause-1.1.2/s2",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The manufacturer shall submit all such documentation to allow for a reasonable evaluation of the legally relevant software."
+    },
+    {
+      "address": "clause-1.1.2/s3",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "This includes:"
+    },
+    {
+      "address": "clause-1.1.2/s4",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of the legally relevant software and how the requirements are met:"
+    },
+    {
+      "address": "clause-1.1.2/s5",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "list of the software modules that belong to the legally relevant part;"
+    },
+    {
+      "address": "clause-1.1.2/s6",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "description of the software interfaces of the legally relevant software part and of the commands and data flows via this interface;"
+    },
+    {
+      "address": "clause-1.1.2/s7",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "list of the parameters to be protected and description of the protection means;"
+    },
+    {
+      "address": "clause-1.1.2/s8",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of suitable system configuration and minimal required resources (see R 129-1, B.5.1(a));"
+    },
+    {
+      "address": "clause-1.1.2/s9",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of the means of securing the operating system (password, etc. if applicable);"
+    },
+    {
+      "address": "clause-1.1.2/s10",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of the (software) sealing method(s);"
+    },
+    {
+      "address": "clause-1.1.2/s11",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "an overview of the system hardware, e.g. topology block diagram, type of computer(s), type of network, etc."
+    },
+    {
+      "address": "clause-1.1.2/s12",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Where a hardware component is deemed legally relevant or where it performs legally relevant functions, this shall also be identified;"
+    },
+    {
+      "address": "clause-1.1.2/s13",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of the user interface, menus and dialogues;"
+    },
+    {
+      "address": "clause-1.1.2/s14",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "the software identification and instructions for obtaining it from an instrument in use;"
+    },
+    {
+      "address": "clause-1.1.2/s15",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "if an audit trail is realised in the software, a description on how to access the audit trail;"
+    },
+    {
+      "address": "clause-1.1.2/s16",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "the operating manual;"
+    },
+    {
+      "address": "clause-1.1.2/s17",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a list of commands of each hardware interface of the measuring instrument/component;"
+    },
+    {
+      "address": "clause-1.1.2/s18",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of the accuracy of the algorithms (e.g. filtering of A/D conversion results, price calculation, rounding algorithms, etc.);"
+    },
+    {
+      "address": "clause-1.1.2/s19",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a description of the datasets stored or transmitted;"
+    },
+    {
+      "address": "clause-1.1.2/s20",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "if detection of significant defects is realised in the software, a list of significant defects that are detected and a description of the detecting algorithm;"
+    },
+    {
+      "address": "clause-1.1.2/s21",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "if fault detection is realised in the software, a list of faults that are detected and a description of the detecting algorithm;"
+    },
+    {
+      "address": "clause-1.1.2/s22",
+      "fragment": "clause-1.1.2",
+      "clause": "1.1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "a list of durability errors that are detected by the software and, if necessary for understanding, a description of the detecting algorithms."
+    },
+    {
+      "address": "clause-1.2/s1",
+      "fragment": "clause-1.2",
+      "clause": "1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Examination shall be carried out on one or more sample instruments submitted for laboratory tests."
+    },
+    {
+      "address": "clause-1.2/s2",
+      "fragment": "clause-1.2",
+      "clause": "1.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "If all tests cannot be completed in the laboratory, an examination of a sample instrument on site shall also be carried out."
+    },
+    {
+      "address": "clause-1.3/s1",
+      "fragment": "clause-1.3",
+      "clause": "1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The instrument shall be examined in conjunction with the submitted documentation to ensure that it complies with the metrological and technical requirements specified in R 129-1."
+    },
+    {
+      "address": "clause-1.4.1/s1",
+      "fragment": "clause-1.4.1",
+      "clause": "1.4.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Laboratory tests shall be performed in accordance with any limitations of use marked on the instrument or included in any documentation accompanying the instrument."
+    },
+    {
+      "address": "clause-1.4.2/s1",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The test shall be carried out using appropriate test objects of various sizes and of stable dimensions."
+    },
+    {
+      "address": "clause-1.4.2/s2",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The test objects shall be opaque, rigid and with flat faces and well defined straight edges."
+    },
+    {
+      "address": "clause-1.4.2/s3",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Test objects may consist of rectangular boxes with dimensions which are known to an expanded uncertainty (coverage factor k=2) of not more than one-third of the mpe."
+    },
+    {
+      "address": "clause-1.4.2/s4",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The dimensions shall also be checked to the same uncertainty when used at the extreme values of the influence factors."
+    },
+    {
+      "address": "clause-1.4.2/s5",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The dimensions of these objects shall lie within the range of values bounded by the minimum and maximum dimensions measurable by the instrument."
+    },
+    {
+      "address": "clause-1.4.2/s6",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "All adjacent faces and edges shall be perpendicular to each other."
+    },
+    {
+      "address": "clause-1.4.2/s7",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The dimensions of the test object shall be \\mathrm{N} \\times d where N is a whole number and d is the value of the scale interval."
+    },
+    {
+      "address": "clause-1.4.2/s8",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "An acceptable tolerance for the product of \\mathrm{N} \\times d is \\pm 1/3 d."
+    },
+    {
+      "address": "clause-1.4.2/s9",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "For the different scale intervals, namely 1, 2 or 5 \\times 10^n, \\mathrm{N} = 10, 20, etc. would be suitable as a test object for all."
+    },
+    {
+      "address": "clause-1.4.2/s10",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "This is applicable for type evaluation and verification tests."
+    },
+    {
+      "address": "clause-1.4.2/s11",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Instruments may be equipped with an extended indication device or mode which displays the indication with a scale interval equal to, or less than, 1/5 d."
+    },
+    {
+      "address": "clause-1.4.2/s12",
+      "fragment": "clause-1.4.2",
+      "clause": "1.4.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "Where an instrument has such a feature, and that feature is used during type evaluation or verification, the dimensions of the test object are not restricted to \\mathrm{N} \\times d provided that the dimensions of the test object are known to at least 1/5 d."
+    },
+    {
+      "address": "clause-1.4.3/s1",
+      "fragment": "clause-1.4.3",
+      "clause": "1.4.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "For compliance with the mpe, indications where the error of indication is less than or equal to the absolute value of the mpe are acceptable."
+    },
+    {
+      "address": "clause-1.4.3/s2",
+      "fragment": "clause-1.4.3",
+      "clause": "1.4.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "For compliance with the significant fault, a difference of 1 d between indications with and without the disturbance applied is acceptable."
+    },
+    {
+      "address": "clause-1.4.3/s3",
+      "fragment": "clause-1.4.3",
+      "clause": "1.4.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "A difference of more than 1 d is not acceptable."
+    },
+    {
+      "address": "clause-1.4.4/s1",
+      "fragment": "clause-1.4.4",
+      "clause": "1.4.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Before a test is conducted and without a test object on the instrument, the instrument shall be in a zero or ready condition."
+    },
+    {
+      "address": "clause-1.4.4/s2",
+      "fragment": "clause-1.4.4",
+      "clause": "1.4.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The test object shall be placed in accordance with the manufacturer’s instructions."
+    },
+    {
+      "address": "clause-1.4.4/s3",
+      "fragment": "clause-1.4.4",
+      "clause": "1.4.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Instruments tested under laboratory conditions shall comply with the mpe (R 129-1, 4.1.2) for influence factors and humidity effects (R 129-1, 4.2.1), and comply with the significant fault requirements for disturbances (R 129-1, 4.3)."
+    },
+    {
+      "address": "clause-1.4.4/s4",
+      "fragment": "clause-1.4.4",
+      "clause": "1.4.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Instruments based on light or acoustic techniques shall comply with the mpe (R 129-1, 4.1.2) for light and acoustic effects (R 129-1, 4.4)."
+    },
+    {
+      "address": "clause-1.4.5/s1",
+      "fragment": "clause-1.4.5",
+      "clause": "1.4.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "For irregular shaped test objects the smallest dimension of that test object for an axis shall be equal to, or greater than, the minimum dimension for that axis."
+    },
+    {
+      "address": "clause-1.4.5/s2",
+      "fragment": "clause-1.4.5",
+      "clause": "1.4.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "However, it must be possible to determine the dimensions of the object to such an accuracy that the smallest rectangular box which fully encloses the object can be calculated within the required uncertainty."
+    },
+    {
+      "address": "clause-1.4.5/s3",
+      "fragment": "clause-1.4.5",
+      "clause": "1.4.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "If the instrument is marked with a minimum protrusion to be measured, a test object with that size protrusion shall be used to verify the marked limit."
+    },
+    {
+      "address": "clause-1.4.6/s1",
+      "fragment": "clause-1.4.6",
+      "clause": "1.4.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "If the instrument does not depend on a particular orientation of the object, several different orientations shall be tested."
+    },
+    {
+      "address": "clause-1.4.6/s2",
+      "fragment": "clause-1.4.6",
+      "clause": "1.4.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "If the instrument does not depend on the object being placed in a particular position on the measuring plane, several different positions shall be tested."
+    },
+    {
+      "address": "clause-1.4.7/s1",
+      "fragment": "clause-1.4.7",
+      "clause": "1.4.7",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "For automatic instruments, tests at the maximum and minimum speeds of relative movement shall be carried out."
+    },
+    {
+      "address": "clause-1.4.8/s1",
+      "fragment": "clause-1.4.8",
+      "clause": "1.4.8",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "For multi-interval instruments, tests shall be performed for all values of the scale interval, i.e. d_1, d_2, \\dots, d_r."
+    },
+    {
+      "address": "clause-1.4.9/s1",
+      "fragment": "clause-1.4.9",
+      "clause": "1.4.9",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Instruments shall be tested with objects of varying surface characteristics to check the limits of such characteristics marked on the instrument or included in the user’s manual."
+    },
+    {
+      "address": "clause-1.4.9/s2",
+      "fragment": "clause-1.4.9",
+      "clause": "1.4.9",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "R 129-1, Annex A, gives guidelines on known surface characteristics to be checked such as colour (uniform and non-uniform), contrast of colour with the measurement plane, reflectivity and absorption of sound and light, transparency, roughness or other."
+    },
+    {
+      "address": "clause-1.4.10/s1",
+      "fragment": "clause-1.4.10",
+      "clause": "1.4.10",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "If the instrument is provided with an interface through which ancillary devices or other instruments can be connected, the tests shall be carried out with a sample device connected and tests applicable to the interface applied (see R 129-1, 5.5.2)."
+    },
+    {
+      "address": "clause-1.4.10/s2",
+      "fragment": "clause-1.4.10",
+      "clause": "1.4.10",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The immunity to RF electromagnetic fields test (see A.3.5) may be carried out on an instrument with only an unterminated cable, connected to the interface."
+    },
+    {
+      "address": "clause-1.4.10/s3",
+      "fragment": "clause-1.4.10",
+      "clause": "1.4.10",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "The length of this cable will be in accordance with the relevant standard referenced in the test procedure."
+    },
+    {
+      "address": "clause-1.4.11/s1",
+      "fragment": "clause-1.4.11",
+      "clause": "1.4.11",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "The risk associated with the software of multi-dimensional measuring instruments is level I."
+    },
+    {
+      "address": "clause-1.4.11/s2",
+      "fragment": "clause-1.4.11",
+      "clause": "1.4.11",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "Validation in accordance with examination level A is adequate for solutions implemented to fulfil requirements at the normal severity level."
+    },
+    {
+      "address": "clause-1.4.11/s3",
+      "fragment": "clause-1.4.11",
+      "clause": "1.4.11",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "table-1 below provides an overview of the proposed verification and evaluation methods applicable to this Recommendation."
+    },
+    {
+      "address": "clause-1.4.11/s4",
+      "fragment": "clause-1.4.11",
+      "clause": "1.4.11",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "table-2 below provides an overview of the combination of various software requirements and relevant evaluation methods."
+    },
+    {
+      "address": "clause-1.4.11/s5",
+      "fragment": "clause-1.4.11",
+      "clause": "1.4.11",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "The acronyms in table-2 are defined in table-1."
+    },
+    {
+      "address": "clause-2.1/s1",
+      "fragment": "clause-2.1",
+      "clause": "2.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "Initial verification of instruments is normally carried out after installation and under the intended conditions of use."
+    },
+    {
+      "address": "clause-2.1/s2",
+      "fragment": "clause-2.1",
+      "clause": "2.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The installation and conditions of use shall be appropriate for the design of the instrument as described in the type evaluation certificate and shall allow the specified performance requirements to be achieved."
+    },
+    {
+      "address": "clause-2.1.1/s1",
+      "fragment": "clause-2.1.1",
+      "clause": "2.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "For software controlled devices, the verification of the software shall include"
+    },
+    {
+      "address": "clause-2.1.1/s2",
+      "fragment": "clause-2.1.1",
+      "clause": "2.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "an examination of the conformity of the software to verify that it is the certified version (e.g. verify the software identification, verify the integrity of securing and protection),"
+    },
+    {
+      "address": "clause-2.1.1/s3",
+      "fragment": "clause-2.1.1",
+      "clause": "2.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "an examination of the configuration to verify that it is compatible with the declared minimal configuration, if given in the certificate,"
+    },
+    {
+      "address": "clause-2.1.1/s4",
+      "fragment": "clause-2.1.1",
+      "clause": "2.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "an examination of the measuring function, including price calculation if available, and"
+    },
+    {
+      "address": "clause-2.1.1/s5",
+      "fragment": "clause-2.1.1",
+      "clause": "2.1.1",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "an examination of the legally relevant parameters (especially the adjustment parameters) to verify that they are correctly set."
+    },
+    {
+      "address": "clause-2.2/s1",
+      "fragment": "clause-2.2",
+      "clause": "2.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "An instrument shall conform to the certificate with respect to its construction and metrological functions."
+    },
+    {
+      "address": "clause-2.2/s2",
+      "fragment": "clause-2.2",
+      "clause": "2.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Devices such as zero adjustment, indicators, printers, etc. shall be checked for correct functioning."
+    },
+    {
+      "address": "clause-2.2/s3",
+      "fragment": "clause-2.2",
+      "clause": "2.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The nameplate shall contain the required information including the type evaluation mark."
+    },
+    {
+      "address": "clause-2.2/s4",
+      "fragment": "clause-2.2",
+      "clause": "2.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Any notices, including notices of limitations of use required by the certificate, shall be checked to ensure that they are readily available to the operator and processes are in place to ensure that they are adhered to."
+    },
+    {
+      "address": "clause-2.3/s1",
+      "fragment": "clause-2.3",
+      "clause": "2.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Test objects shall be available and comply with requirements of 1.4.2."
+    },
+    {
+      "address": "clause-2.4/s1",
+      "fragment": "clause-2.4",
+      "clause": "2.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Accuracy tests shall be carried out in accordance with test A.1.2 at the operating conditions in effect at the time of verification."
+    },
+    {
+      "address": "clause-2.5/s1",
+      "fragment": "clause-2.5",
+      "clause": "2.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The following tests shall be carried out as applicable, depending on the mode of operation, environment location, and the intended use of the instrument:"
+    },
+    {
+      "address": "clause-2.5/s2",
+      "fragment": "clause-2.5",
+      "clause": "2.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "tests for irregular shaped objects (1.4.5);"
+    },
+    {
+      "address": "clause-2.5/s3",
+      "fragment": "clause-2.5",
+      "clause": "2.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "tests for different orientations and positions (1.4.6);"
+    },
+    {
+      "address": "clause-2.5/s4",
+      "fragment": "clause-2.5",
+      "clause": "2.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "tests for automatic instruments (1.4.7);"
+    },
+    {
+      "address": "clause-2.5/s5",
+      "fragment": "clause-2.5",
+      "clause": "2.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "tests for multi-interval instruments (1.4.8); and"
+    },
+    {
+      "address": "clause-2.5/s6",
+      "fragment": "clause-2.5",
+      "clause": "2.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "tests for different surfaces (1.4.9)."
+    },
+    {
+      "address": "clause-3/s1",
+      "fragment": "clause-3",
+      "clause": "3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Unless national regulations specify otherwise, subsequent verification tests shall be carried out in accordance with accuracy tests specified in 2.4, using test objects specified in 2.3."
+    },
+    {
+      "address": "clause-3/s2",
+      "fragment": "clause-3",
+      "clause": "3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "For software controlled devices, software verification shall be carried out as specified in 2.1.1."
+    },
+    {
+      "address": "clause-A/s1",
+      "fragment": "clause-A",
+      "clause": "A",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "Performance tests carried out under the influence factors, disturbances and humidity effects specified in R 129-1, 4.2, 4.3 and 4.4, ensure that measuring instruments perform over a range of environmental conditions likely to be met in normal use."
+    },
+    {
+      "address": "clause-A.1.3/s1",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Before tests are conducted and without a test object in the measurement area, the instrument shall be in zero or ready condition."
+    },
+    {
+      "address": "clause-A.1.3/s2",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Test objects shall be used such that at least one measurement of at least five dimensions approximately equally spaced between and including at or near minimum and maximum dimensions, shall be carried out for each axis (L, W and H)."
+    },
+    {
+      "address": "clause-A.1.3/s3",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "For the following influence factor tests it is permitted to use test objects only near the minimum dimensions:"
+    },
+    {
+      "address": "clause-A.1.3/s4",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "static temperatures;"
+    },
+    {
+      "address": "clause-A.1.3/s5",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "damp heat, steady-state (non-condensing)."
+    },
+    {
+      "address": "clause-A.1.3/s6",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The tests shall first be carried out under reference conditions (R 129-1, 4.1.7©) and then at each of the extreme conditions of the influence factors specified in R 129-1, 4.2.1."
+    },
+    {
+      "address": "clause-A.1.3/s7",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "When the effect of one influence factor is being evaluated, all other factors shall be held relatively constant at a value close to the reference conditions specified in R 129-1, 4.1.7©."
+    },
+    {
+      "address": "clause-A.1.3/s8",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The test results at each dimension and each condition shall be compared with the mpes (R 129-1, 4.1.2)."
+    },
+    {
+      "address": "clause-A.1.3/s9",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "If applicable, the variation between indicators shall be checked against the permissible difference (R 129-1, 4.1.4)."
+    },
+    {
+      "address": "clause-A.1.3/s10",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Any calculated quantities shall be checked for correct multiplication and rounding (R 129-1, 4.1.6)."
+    },
+    {
+      "address": "clause-A.1.3/s11",
+      "fragment": "clause-A.1.3",
+      "clause": "A.1.3",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The effect of influence factors on any interfaces (R 129-1, 5.5.2) or electronic sealing provisions (R 129-1, 6.3.1) shall also be checked."
+    },
+    {
+      "address": "clause-A.1.4/s1",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Tests for disturbances shall be carried out on all electronic instruments."
+    },
+    {
+      "address": "clause-A.1.4/s2",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The damp heat, cyclic test (A.3.6) is only carried out on instruments intended for use in locations where they may be subject to condensate water."
+    },
+    {
+      "address": "clause-A.1.4/s3",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Tests using at least one test object shall be carried out, firstly at reference conditions (R 129-1, 4.1.7©) and no disturbance, and then with the applications of each disturbance specified in R 129-1, 4.3."
+    },
+    {
+      "address": "clause-A.1.4/s4",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "Only one disturbance at a time shall be applied."
+    },
+    {
+      "address": "clause-A.1.4/s5",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The disturbances shall be applied during the display mode of the three dimensions (L, W and H)."
+    },
+    {
+      "address": "clause-A.1.4/s6",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The difference between the tests with and without the disturbance shall be compared with the significant fault (R 129-1, 2.3.7)."
+    },
+    {
+      "address": "clause-A.1.4/s7",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "All indicators shall be checked."
+    },
+    {
+      "address": "clause-A.1.4/s8",
+      "fragment": "clause-A.1.4",
+      "clause": "A.1.4",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The effect of disturbances on any interfaces (R 129-1, 5.5.2) or electronic sealing provisions (R 129-1, 6.3.1) shall also be checked."
+    },
+    {
+      "address": "clause-A.1.5/s1",
+      "fragment": "clause-A.1.5",
+      "clause": "A.1.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The tests shall be carried out as specified in A.1.3 under the variation of light and acoustic effects given in A.4."
+    },
+    {
+      "address": "clause-A.1.5/s2",
+      "fragment": "clause-A.1.5",
+      "clause": "A.1.5",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The test results at each dimension and at each condition shall be compared with the mpe (R 129-1, 4.1.2)."
+    },
+    {
+      "address": "clause-A.1.6/s1",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "Tests for (see 1.4.5 to 1.4.10)"
+    },
+    {
+      "address": "clause-A.1.6/s2",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "irregularly shaped objects,"
+    },
+    {
+      "address": "clause-A.1.6/s3",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "different orientations of the object,"
+    },
+    {
+      "address": "clause-A.1.6/s4",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "the range of relative motion,"
+    },
+    {
+      "address": "clause-A.1.6/s5",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "multi-interval instruments,"
+    },
+    {
+      "address": "clause-A.1.6/s6",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "different surfaces, and"
+    },
+    {
+      "address": "clause-A.1.6/s7",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "interfaces, if applicable"
+    },
+    {
+      "address": "clause-A.1.6/s8",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "shall be carried out under reference conditions (R 129-1, 4.1.7©)."
+    },
+    {
+      "address": "clause-A.1.6/s9",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "The tests as specified in A.1.3 shall be used, except that at least three measurements of at least three dimensions shall be carried out for each axis."
+    },
+    {
+      "address": "clause-A.1.6/s10",
+      "fragment": "clause-A.1.6",
+      "clause": "A.1.6",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "normative",
+      "text": "All results shall be compared with the mpe (R 129-1, 4.1.2)."
+    },
+    {
+      "address": "clause-A.1.7/s1",
+      "fragment": "clause-A.1.7",
+      "clause": "A.1.7",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "The following tests apply to the various types of electronic instruments using the following principles of operation."
+    },
+    {
+      "address": "table-A.3/note-1/s1",
+      "fragment": "table-A.3/note-1",
+      "kind": "note",
+      "fragment_normative": false,
+      "modality": "informative",
+      "text": "table-a1 is not all-inclusive, but illustrates the test selection criteria."
+    },
+    {
+      "address": "clause-A.2/s1",
+      "fragment": "clause-A.2",
+      "clause": "A.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "Additional information for carrying out the test procedures for influence factors is given below."
+    },
+    {
+      "address": "clause-A.2/s2",
+      "fragment": "clause-A.2",
+      "clause": "A.2",
+      "kind": "provision",
+      "fragment_normative": true,
+      "modality": "informative",
+      "text": "The instrument being tested is referred to as the equipment under test (EUT)."
+    },
+    {
+      "address": "table-A.5/note-1/s1",
+      "fragment": "table-A.5/note-1",
+      "kind": "note",
+      "fragment_normative": false,
+      "modality": "informative",
+      "text": "One measurement on every sample is taken using each unit, at every test condition."
+    },
+    {
+      "address": "table-A.6/note-1/s1",
+      "fragment": "table-A.6/note-1",
+      "kind": "note",
+      "fragment_normative": false,
+      "modality": "informative",
+      "text": "The nominal voltage is that specified by the manufacturer."
+    },
+    {
+      "address": "table-A.6/note-1/s2",
+      "fragment": "table-A.6/note-1",
+      "kind": "note",
+      "fragment_normative": false,
+      "modality": "informative",
+      "text": "If a voltage range is marked, the upper limit applies to the high level value of the range and the lower limit applies to the low level value of the range."
+    },
+    {
+      "address": "table-A.8/note-1/s1",
+      "fragment": "table-A.8/note-1",
+      "kind": "note",
+      "fragment_normative": false,
+      "modality": "informative",
+      "text": "Values applicable for 50 Hz/60 Hz respectively."
+    }
+  ]
+}