@oimlsmart/primmel-packages 0.1.0

package/oiml-r144/execution/forms/sec-tests/low-battery-test.prl

@@ -0,0 +1,48 @@
+form r144-3/test-low-battery {
+  name "Low Battery Voltage Test"
+  description "Low voltage of internal battery, not connected to the mains power (R 144-2, 1.18)"
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/low-battery
+  section "R 144-2, 1.18"
+  requirements { /req/metrological/rated-conditions }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.1"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.18"
+  applicability {
+    power_supply: [battery, ac-and-battery]
+  }
+  field battery_voltage_min_declared : number {
+    description "Manufacturer-specified minimum battery supply voltage"
+    unit "V"
+    required true
+    measurement_method declared
+    bind model.parameters.battery_voltage_min
+  }
+  field measurements_within_limits : array {
+    description "Measurements at a supply voltage within the defined limits (date/time, temperature, voltage, functional mode, indications, errors recorded)"
+    required true
+    subform_ref cgm-point { }
+  }
+  field cutoff_voltage : number {
+    description "Voltage at which the equipment clearly ceases to function properly"
+    unit "V"
+    required true
+    measurement_method direct
+  }
+  field response_below_limit : text {
+    description "Indications, errors and other relevant responses below the limit"
+  }
+  field within_spec : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/rated-conditions }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{cutoff_voltage <= battery_voltage_min_declared}" condition "Functions properly down to the declared battery limit" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The system shall function within the manufacturer specifications down to the declared battery voltage limit and shall give no invalid result below it (R 144-1, 4.5.1)." pass_if "ocl{within_spec}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/power-reduction-test.prl

@@ -0,0 +1,49 @@
+form r144-3/test-power-reduction {
+  name "Short Time Power Reduction Test"
+  description "AC mains voltage dips, short interruptions and voltage variations (R 144-2, 1.12) — evidence for R 144-3, 3.8 \"Short time power reduction\""
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/power-reduction
+  section "R 144-2, 1.12"
+  requirements { /req/metrological/disturbances }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.12"
+  field reductions : array {
+    description "Applied reductions (100 % × 10 ms; 40 % × 30 ms), 10 repetitions each with ≥ 10 s interval"
+    required true
+    items { object fields {
+      field reduction_pct : number {
+        unit "%"
+        required true
+      }
+      field duration_ms : number {
+        unit "ms"
+        required true
+      }
+      field repetitions : integer {
+        default 10
+      }
+      } }
+  }
+  field measurements : array {
+    description "Measurements during the test with the CGM of the largest volume fraction"
+    required true
+    subform_ref cgm-point { }
+  }
+  field fault_detected : boolean {
+    measurement_method direct
+  }
+  field within_limits_or_detected : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/disturbances }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference))) or fault_detected}" condition "|error| <= MPE on verification, or fault detected" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall lie within the permissible limits, or the failure shall be detected by the checking facility (R 144-1, 4.5.4 b)." pass_if "ocl{within_limits_or_detected}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/power-supply-test.prl

@@ -0,0 +1,57 @@
+form r144-3/test-power-supply {
+  name "Power Supply Variation Test"
+  description "Operation within MPE at the extremes of supply voltage (-15 % / +10 %) and frequency (±2 %) (R 144-2, 1.9) — evidence for R 144-3, 3.8 \"AC supply voltage\" / \"Supply frequency\" / \"DC supply voltage\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/power-supply
+  section "R 144-2, 1.9"
+  requirements { /req/metrological/rated-conditions /req/metrological/mpe-operating }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.1"
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.3.2"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.9"
+  field nominal_voltage : number {
+    unit "V"
+    required true
+    measurement_method declared
+    bind model.parameters.supply_voltage
+  }
+  field nominal_frequency : number {
+    unit "Hz"
+    measurement_method declared
+    bind model.parameters.supply_frequency
+  }
+  field supply_extremes : array {
+    description "Each extreme of voltage (-15 % / +10 %) and frequency (±2 %)"
+    required true
+    items { object fields {
+      field voltage_actual : number {
+        unit "V"
+        required true
+        measurement_method direct
+      }
+      field frequency_actual : number {
+        unit "Hz"
+        measurement_method direct
+      }
+      field measurements : array {
+        description "At least two measurements with the CGM of the largest volume fraction"
+        required true
+        min_items 2
+        subform_ref cgm-point { }
+      }
+      } }
+  }
+  field within_mpe_operating : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/mpe-operating }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{supply_extremes->forAll(x | x.measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference))))}" condition "all |error| <= MPE on verification at all supply extremes" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The reading shall remain within the MPE on verification (max(5 ppm, 10 %)) at each extreme of the power supply parameters." pass_if "ocl{within_mpe_operating}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/repeatability-test.prl

@@ -0,0 +1,60 @@
+form r144-3/test-repeatability {
+  name "Repeatability Test"
+  description "Estimated standard deviation of 20 consecutive measurements per CGM (R 144-2, 1.4) — evidence for R 144-3, 3.8 \"Repeatability\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/repeatability-test
+  section "R 144-2, 1.4"
+  requirements { /req/metrological/repeatability }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.4"
+  calculation_context { dimensions true tables { repeatability_runs } }
+  field repeatability_series : array {
+    description "One series per recommended CGM (R 144-2, 1.2)"
+    required true
+    items { object fields {
+      field cgm_reference : number {
+        unit "ppm"
+        required true
+        measurement_method direct
+      }
+      field readings : array {
+        description "20 consecutive indications (n = 20)"
+        required true
+        measurement_method direct
+        items { number unit "ppm" }
+        min_items 20
+      }
+      field mean_indication : number {
+        unit "ppm"
+        measurement_method derived
+        derivation "ocl{readings->average()}"
+      }
+      field std_deviation : number {
+        unit "ppm"
+        measurement_method computed
+        specification_reference "R 144-2, 1.4"
+        calculation repeatabilityStdDev
+        calculation_bindings { y_i: readings }
+      }
+      field std_dev_limit : number {
+        unit "ppm"
+        measurement_method computed
+        specification_reference "R 144-1, 4.4"
+        calculation repeatabilityLimit
+        calculation_bindings { measured_value: cgm_reference }
+      }
+      field within_limit : boolean {
+        measurement_method evaluated
+        true_label "Pass"
+        false_label "Fail"
+        evaluation { rule "ocl{std_deviation <= std_dev_limit}" condition "s <= MPE / 3" }
+      }
+      } }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The estimated standard deviation shall not exceed 1/3 of the maximum permissible intrinsic error at each test point." pass_if "ocl{repeatability_series->forAll(s | s.within_limit)}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/response-time-test.prl

@@ -0,0 +1,43 @@
+form r144-3/test-response-time {
+  name "Response Time Test"
+  description "Time to reach 90 % of the stable signal after switching from ambient air to CGM at 90 % of max range (R 144-2, 1.20) — supports R 144-3, 3.7 \"Response time\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/response-time-test
+  section "R 144-2, 1.20"
+  requirements { /req/metrological/response-time }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.6"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.20"
+  ref definition "urn:oiml:pub:r:144-1:2013#clause-2.12"
+  field response_time_declared : number {
+    description "Declared response time t_90"
+    unit "s"
+    measurement_method declared
+    bind model.parameters.response_time
+  }
+  field cgm_reference : number {
+    description "CGM at 90 % of the maximum value of the measuring range or sub-range, supplied at ambient pressure ±750 Pa"
+    unit "ppm"
+    required true
+    measurement_method direct
+  }
+  field t90_measured : number {
+    description "Time from replacing ambient air with the sample to 90 % of the stable signal"
+    unit "s"
+    required true
+    measurement_method direct
+  }
+  field within_limit : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/response-time }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{t90_measured <= 240}" condition "t_90 <= 4 min (240 s)" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The reading shall reach at least 90 % of the value within four minutes of the abrupt 0 % to 100 % change (R 144-1, 4.6)." pass_if "ocl{within_limit}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/rf-emf-test.prl

@@ -0,0 +1,47 @@
+form r144-3/test-rf-emf {
+  name "Radiated RF Electromagnetic Field Test"
+  description "Radiated radio frequency electromagnetic fields, 26 MHz–3 GHz at 10 V/m (R 144-2, 1.17) — evidence for R 144-3, 3.8 \"Radio frequency electromagnetic fields\""
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/rf-emf
+  section "R 144-2, 1.17"
+  requirements { /req/metrological/disturbances }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.17"
+  field frequency_range : string {
+    required true
+    measurement_method direct
+    default "26 MHz – 3 GHz"
+  }
+  field field_strength : number {
+    unit "V/m"
+    required true
+    measurement_method direct
+    default 10
+  }
+  field modulation : string {
+    measurement_method direct
+    default "80 % AM, 1 kHz sine"
+  }
+  field measurements : array {
+    description "Measurements during the test with the CGM of the largest volume fraction"
+    required true
+    subform_ref cgm-point { }
+  }
+  field fault_detected : boolean {
+    measurement_method direct
+  }
+  field within_limits_or_detected : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/disturbances }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference))) or fault_detected}" condition "|error| <= MPE on verification, or fault detected" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall lie within the permissible limits, or the failure shall be detected by the checking facility (R 144-1, 4.5.4 e)." pass_if "ocl{within_limits_or_detected}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/shock-test.prl

@@ -0,0 +1,50 @@
+form r144-3/test-shock {
+  name "Mechanical Shock Test"
+  description "Error before/after 25 mm drops on each bottom edge (R 144-2, 1.11.2) — evidence for R 144-3, 3.8 \"Mechanical shocks\""
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/shock-test
+  section "R 144-2, 1.11.2"
+  requirements { /req/metrological/disturbances }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.11.2"
+  field drop_height_mm : number {
+    unit "mm"
+    required true
+    measurement_method direct
+    default 25
+  }
+  field drops_per_edge : integer {
+    description "One fall on each bottom edge"
+    required true
+    measurement_method direct
+    default 1
+  }
+  field error_before : object {
+    description "Error before the test with the CGM of the largest volume fraction"
+    required true
+    subform_ref cgm-point { }
+  }
+  field error_after : object {
+    description "Error after the test with the CGM of the largest volume fraction"
+    required true
+    subform_ref cgm-point { }
+  }
+  field fault_detected : boolean {
+    description "Significant fault detected and acted upon by the checking facility"
+    measurement_method direct
+  }
+  field within_limits_or_detected : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/disturbances }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{(abs(error_after.error) <= max(5, 0.10 * abs(error_after.cgm_reference))) or fault_detected}" condition "|error| <= MPE on verification, or fault detected" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall lie within the permissible limits, or the failure shall be detected by the checking facility (R 144-1, 4.5.4 a)." pass_if "ocl{within_limits_or_detected}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/surge-test.prl

@@ -0,0 +1,52 @@
+form r144-3/test-surge {
+  name "Surge Test (Signal, Data and Control Lines)"
+  description "Electrical surges on signal, data and control lines (R 144-2, 1.15)"
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/surge
+  section "R 144-2, 1.15"
+  requirements { /req/metrological/disturbances }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.15"
+  applicability {
+    capabilities: [data-interface]
+  }
+  field surge_levels : array {
+    description "Unbalanced lines 1.0 kV line-to-line / 2.0 kV line-to-earth; balanced lines 2.0 kV line-to-earth"
+    required true
+    items { object fields {
+      field coupling : string {
+        required true
+      }
+      field amplitude_kv : number {
+        unit "kV"
+        required true
+      }
+      } }
+  }
+  field surges_applied : string {
+    description "At least three positive and three negative surges"
+    required true
+    measurement_method direct
+  }
+  field measurements : array {
+    required true
+    subform_ref cgm-point { }
+  }
+  field fault_detected : boolean {
+    measurement_method direct
+  }
+  field within_limits_or_detected : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/disturbances }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference))) or fault_detected}" condition "|error| <= MPE on verification, or fault detected" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall lie within the permissible limits, or the failure shall be detected by the checking facility." pass_if "ocl{within_limits_or_detected}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/vibration-test.prl

@@ -0,0 +1,58 @@
+form r144-3/test-vibration {
+  name "Mechanical Vibration Test"
+  description "Reading variation under random vibration (R 144-2, 1.11.1) — evidence for R 144-3, 3.8 \"Mechanical vibrations\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/vibration-test
+  section "R 144-2, 1.11.1"
+  requirements { /req/metrological/vibration }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.3"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.11.1"
+  field vibration_severity_declared : string {
+    description "Manufacturer-specified vibration parameters (minimum severity level 1 of OIML D 11:2013, 11.1)"
+    required true
+    measurement_method declared
+    bind model.parameters.vibration_severity
+  }
+  field cgm_reference : number {
+    description "CGM of the largest volume fraction (R 144-2, 1.2)"
+    unit "ppm"
+    required true
+    measurement_method direct
+  }
+  field reading_at_rest : number {
+    unit "ppm"
+    required true
+    measurement_method direct
+  }
+  field reading_under_vibration : number {
+    unit "ppm"
+    required true
+    measurement_method direct
+  }
+  field variation : number {
+    unit "ppm"
+    measurement_method computed
+    calculation indicationVariation
+    calculation_bindings { indication_with: reading_under_vibration indication_without: reading_at_rest }
+  }
+  field variation_limit : number {
+    description "Limit of the reading variation given in the operating manual"
+    unit "ppm"
+    required true
+    measurement_method declared
+  }
+  field within_limit : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/vibration }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{abs(variation) <= variation_limit}" condition "|Δreading| <= value given in the operating manual" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The absolute value of the reading variation shall not exceed the value given in the operating manual (R 144-1, 8.4.3)." pass_if "ocl{within_limit}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/warm-up-time-test.prl

@@ -0,0 +1,69 @@
+form r144-3/test-warm-up-time {
+  name "Warm-up Time Test"
+  description "Measurements immediately after warm-up and at 2, 5, 15 min, at reference conditions and 5 °C (R 144-2, 1.19) — supports R 144-3, 3.7 \"Warm-up time\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/warm-up-test
+  section "R 144-2, 1.19"
+  requirements { /req/metrological/warm-up-time }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.7"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.19"
+  field warm_up_time_declared : number {
+    description "Manufacturer-specified warm-up time (or automatic warm-up lockout)"
+    unit "min"
+    required true
+    measurement_method declared
+    bind model.parameters.warm_up_time
+  }
+  field test_temperatures : array {
+    description "Series at reference conditions and at 5 °C"
+    required true
+    items { object fields {
+      field temperature : number {
+        unit "degC"
+        required true
+        measurement_method direct
+      }
+      field warm_up_series : array {
+        description "Measurements immediately after warm-up, +2 min, +5 min, +15 min, with each CGM"
+        required true
+        items { object fields {
+          field elapsed_min : number {
+            description "Time after warm-up (0, 2, 5, 15)"
+            unit "min"
+            required true
+          }
+          field cgm_reference : number {
+            unit "ppm"
+            required true
+          }
+          field indication : number {
+            unit "ppm"
+            required true
+            measurement_method direct
+          }
+          } }
+        min_items 4
+        series { axis elapsed_min { unit "min" role time } axis cgm_reference { unit "ppm" } cell { symbol indication unit "ppm" } }
+      }
+      } }
+  }
+  field mpe_basis : string {
+    measurement_method declared
+    specification_reference "R 144-1, 4.3.2"
+    default "max(5 ppm, 10 % of measured value) — MPE on initial verification (R 144-1, 4.3.2)"
+  }
+  field within_mpe_verification : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/warm-up-time }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{test_temperatures->forAll(t | group_by(t.warm_up_series, 'cgm_reference')->forAll(g | pairwise_max_difference(g, 'indication') <= max(5, 0.10 * abs(g->first().cgm_reference))))}" condition "Difference between any of the four values <= |MPE on initial verification|" specification_reference "R 144-2, 1.19" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The difference between any of the four measured values (0, 2, 5, 15 min after warm-up) shall not exceed the absolute value of the maximum permissible error on initial verification (R 144-1, 4.3.2)." pass_if "ocl{within_mpe_verification}" }
+}
+

package/oiml-r144/execution/forms/shared/headers.prl

@@ -0,0 +1,132 @@
+form r144-3/header-a {
+  name "Form Header A"
+  description "Header for gas analytical system test forms with full identification and test conditions"
+  data_class FormInstance#data
+  field application_no : string {
+    required true
+    bind application.application_number
+  }
+  field system_model : string {
+    required true
+    bind model.model_designation
+  }
+  field serial_no : string {
+    required true
+    bind sample.serial_number
+  }
+  field measurand_components : string {
+    required true
+    bind model.classification.measurand_components
+  }
+  field measuring_principle : string {
+    bind family.classification.measuring_principle
+  }
+  field component_under_test : enum {
+    required true
+    enum_values { CO NO NO2 NOx }
+  }
+  field range_min : number {
+    unit "ppm"
+    required true
+  }
+  field range_max : number {
+    unit "ppm"
+    required true
+  }
+  field evaluator : string {
+    required true
+  }
+  field conditions : object {
+    fields {
+      field date_start : date {
+        
+      }
+      field date_end : date {
+        
+      }
+      field temperature_start : number {
+        unit "degC"
+      }
+      field temperature_end : number {
+        unit "degC"
+      }
+      field relative_humidity_start : number {
+        unit "%"
+      }
+      field relative_humidity_end : number {
+        unit "%"
+      }
+      field barometric_pressure_start : number {
+        unit "kPa"
+      }
+      field barometric_pressure_end : number {
+        unit "kPa"
+      }
+      }
+  }
+}
+
+
+form r144-3/header-b {
+  name "Form Header B"
+  description "Compact header for disturbance/EMC test forms"
+  data_class FormInstance#data
+  field application_no : string {
+    required true
+    bind application.application_number
+  }
+  field system_model : string {
+    required true
+    bind model.model_designation
+  }
+  field serial_no : string {
+    required true
+    bind sample.serial_number
+  }
+  field date : date {
+    required true
+  }
+  field time : string {
+    pattern "\\d{2}:\\d{2}:\\d{2}"
+  }
+  field temperature : number {
+    unit "degC"
+  }
+  field relative_humidity : number {
+    unit "%"
+  }
+  field barometric_pressure : number {
+    unit "kPa"
+  }
+}
+
+
+form r144-3/conditions {
+  name "Form Conditions"
+  description "Conditions block used in most test forms"
+  field date_start : date {
+    
+  }
+  field date_end : date {
+    
+  }
+  field temperature_start : number {
+    unit "degC"
+  }
+  field temperature_end : number {
+    unit "degC"
+  }
+  field relative_humidity_start : number {
+    unit "%"
+  }
+  field relative_humidity_end : number {
+    unit "%"
+  }
+  field barometric_pressure_start : number {
+    unit "kPa"
+  }
+  field barometric_pressure_end : number {
+    unit "kPa"
+  }
+}
+