@oimlsmart/primmel-packages 0.1.0

package/oiml-r144/execution/forms/sec-tests/bursts-signal-test.prl

@@ -0,0 +1,55 @@
+form r144-3/test-bursts-signal {
+  name "Electrical Burst Test (Signal, Data and Control Lines)"
+  description "Bursts (transients) on signal, data and control lines (R 144-2, 1.14)"
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/burst-signal
+  section "R 144-2, 1.14"
+  requirements { /req/metrological/disturbances }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.14"
+  applicability {
+    capabilities: [data-interface]
+  }
+  field burst_amplitude_kv : number {
+    unit "kV"
+    required true
+    measurement_method direct
+    default 1
+  }
+  field repetition_rate_khz : number {
+    unit "kHz"
+    required true
+    measurement_method direct
+    default 5
+  }
+  field bursts_applied : string {
+    description "At least ten positive and ten negative bursts, randomly phased; ≥ 1 min per amplitude and polarity"
+    required true
+    measurement_method direct
+  }
+  field readjusted : boolean {
+    description "EUT readjusted during the test (only to reset after a significant fault indication)"
+    measurement_method direct
+  }
+  field measurements : array {
+    required true
+    subform_ref cgm-point { }
+  }
+  field fault_detected : boolean {
+    measurement_method direct
+  }
+  field within_limits_or_detected : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/disturbances }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference))) or fault_detected}" condition "|error| <= MPE on verification, or fault detected" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall lie within the permissible limits, or the failure shall be detected by the checking facility." pass_if "ocl{within_limits_or_detected}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/cold-test.prl

@@ -0,0 +1,48 @@
+form r144-3/test-cold {
+  name "Cold Test"
+  description "Operation within MPE at 5 °C (or manufacturer minimum) for 2 h (R 144-2, 1.6) — evidence for R 144-3, 3.8 \"Temperature\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/cold
+  section "R 144-2, 1.6"
+  requirements { /req/metrological/rated-conditions /req/metrological/mpe-operating }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.1"
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.3.2"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.6"
+  calculation_context { dimensions true }
+  field test_temperature : number {
+    description "Exposure temperature (5 °C or the manufacturer minimum operating temperature)"
+    unit "degC"
+    required true
+    measurement_method direct
+  }
+  field manufacturer_t_min : number {
+    unit "degC"
+    measurement_method declared
+    bind family.parameters.t_min
+  }
+  field exposure_duration_h : number {
+    description "Exposure duration after temperature stability (2 h; dT ≤ 1 °C/min, RH ≤ 50 %)"
+    unit "h"
+    required true
+    measurement_method direct
+  }
+  field measurements : array {
+    description "One measurement every half-hour with each CGM (R 144-2, 1.2)"
+    required true
+    subform_ref cgm-point { }
+  }
+  field within_mpe_operating : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/mpe-operating }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference)))}" condition "all |error| <= MPE on verification" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The reading shall remain within the MPE on verification under rated operating conditions (max(5 ppm, 10 %)) during 2 h at low temperature." pass_if "ocl{within_mpe_operating}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/cross-sensitivity-test.prl

@@ -0,0 +1,92 @@
+form r144-3/test-cross-sensitivity {
+  name "Cross Sensitivity Test"
+  description "Influence of gas components other than the measurand (R 144-2, 1.10) — evidence for R 144-3, 3.8 \"Cross sensitivity\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/cross-sensitivity-test
+  section "R 144-2, 1.10"
+  requirements { /req/metrological/cross-sensitivity }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.2"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.10"
+  field interfering_components_declared : object {
+    description "Manufacturer list of interfering components and their maximum permissible concentrations (R 144-1, 4.5.2 NOTE) — structured (component, max_concentration) pairs per the pair-list convention (TODO.roadmap/20)"
+    measurement_method declared
+    bind model.parameters.interfering_components
+  }
+  field measurand_level : number {
+    description "Measurand volume fraction (10 % of the upper level of the measuring range or sub-range)"
+    unit "ppm"
+    required true
+    measurement_method direct
+    symbol x_ref
+  }
+  field interferent_rows : array {
+    description "One row per influencing gas component"
+    required true
+    items { object fields {
+      field interferent : string {
+        description "Influencing gas component"
+        required true
+      }
+      field interferent_fraction : number {
+        description "Volume fraction of the influencing component (its limit content)"
+        unit "ppm"
+        required true
+        measurement_method direct
+      }
+      field reading_zero_gas : number {
+        description "Reading with zero gas N2"
+        unit "ppm"
+        measurement_method direct
+        symbol reading_zero_gas
+      }
+      field reading_interferent_alone : number {
+        description "Reading with the influencing gas alone in N2"
+        unit "ppm"
+        measurement_method direct
+        symbol reading_interferent
+      }
+      field reading_interferent_with_measurand : number {
+        description "Reading with the influencing gas together with the measurand in N2"
+        unit "ppm"
+        measurement_method direct
+        symbol reading_with_measurand
+      }
+      field variation : number {
+        description "Zero-point effect — variation of the reading caused by the interferent alone, against the zero-gas baseline"
+        unit "ppm"
+        measurement_method computed
+        verdict cross_sensitivity_variation
+      }
+      field span_effect : number {
+        description "Span effect — deviation of the measurand reading caused by the interferent at the given point (combined step minus interferent-alone, minus the measurand level)"
+        unit "ppm"
+        measurement_method computed
+        verdict cross_sensitivity_span_effect
+      }
+      field half_mpe : number {
+        unit "ppm"
+        measurement_method computed
+        specification_reference "R 144-1, 4.5.2"
+        derivation "ocl{0.5 * max(2, 0.05 * abs(measurand_level))}"
+      }
+      field within_limit : boolean {
+        measurement_method evaluated
+        true_label "Pass"
+        false_label "Fail"
+        evaluation { verdict cross_sensitivity_variation op lte limit "ocl{0.5 * max(2, 0.05 * abs(x_ref))}" condition "|zero-point effect vs zero gas| <= 0.5 × |MPE|" }
+      }
+      field span_within_limit : boolean {
+        measurement_method evaluated
+        true_label "Pass"
+        false_label "Fail"
+        evaluation { verdict cross_sensitivity_span_effect op lte limit "ocl{0.5 * max(2, 0.05 * abs(x_ref))}" condition "|span effect| <= 0.5 × |MPE|" }
+      }
+      } }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The indication shall not vary by more than half the absolute value of the maximum permissible intrinsic error for any influencing component at its maximum permissible concentration — both the zero-point effect (interferent alone vs zero gas) and the span effect (deviation of the measurand reading at the given point)." pass_if "ocl{interferent_rows->forAll(r | r.within_limit and r.span_within_limit)}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/damp-heat-test.prl

@@ -0,0 +1,50 @@
+form r144-3/test-damp-heat {
+  name "Damp Heat Test (Steady State)"
+  description "Operation within MPE at 30 °C / 85 % RH for 2 days (R 144-2, 1.7) — evidence for R 144-3, 3.8 \"Humidity\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/damp-heat
+  section "R 144-2, 1.7"
+  requirements { /req/metrological/rated-conditions /req/metrological/mpe-operating }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.1"
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.3.2"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.7"
+  calculation_context { dimensions true }
+  field test_temperature : number {
+    unit "degC"
+    required true
+    measurement_method direct
+    default 30
+  }
+  field test_humidity : number {
+    description "Constant relative humidity (no condensation on the system)"
+    unit "%"
+    required true
+    measurement_method direct
+    default 85
+  }
+  field exposure_duration_days : number {
+    description "Exposure duration in days (temperature steady: extremes ≤ 5 °C, rate ≤ 5 °C/h)"
+    required true
+    measurement_method direct
+    default 2
+  }
+  field measurements : array {
+    description "One measurement per day with each CGM (R 144-2, 1.2)"
+    required true
+    subform_ref cgm-point { }
+  }
+  field within_mpe_operating : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/mpe-operating }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference)))}" condition "all |error| <= MPE on verification" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The reading shall remain within the MPE on verification under rated operating conditions (max(5 ppm, 10 %)) during 2 days of damp heat." pass_if "ocl{within_mpe_operating}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/documentation-examination.prl

@@ -0,0 +1,52 @@
+form r144-3/test-documentation-examination {
+  name "Documentation Examination"
+  description "Review of the type evaluation documentation and operating manual (R 144-1, 7.1.1, 7.1.3.4)"
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/examinations/documentation
+  section "R 144-1, 7.1.1"
+  requirements { /req/technical/type-evaluation-documentation /req/technical/operating-manual }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-7.1.1"
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-6.2"
+  ref test-procedure "urn:oiml:pub:r:144-1:2013#clause-7.1.3.4"
+  field principle_description : boolean {
+    description "Description of the general principle of measurement provided"
+    required true
+  }
+  field component_list : boolean {
+    description "List of essential components with their characteristics provided"
+    required true
+  }
+  field component_drawings : boolean {
+    description "Description of essential components with drawings and diagrams provided"
+    required true
+  }
+  field software_information : boolean {
+    description "General information on the software provided"
+    required true
+  }
+  field emission_formula : boolean {
+    description "Formula applied for calculation of mass emission components described"
+    required true
+  }
+  field operating_manual : boolean {
+    description "Operating manual provided and covering R 144-1, 6.2 items (operation, storage temperatures, rated conditions, warm-up time, environmental conditions/classes, safety)"
+    required true
+  }
+  field manufacturer_test_results : boolean {
+    description "Details and results of manufacturer testing provided (if any)"
+  }
+  field documentation_complete : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/technical/type-evaluation-documentation }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{principle_description and component_list and component_drawings and software_information and emission_formula and operating_manual}" condition "All R 144-1, 7.1.1 documentation items present" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The type evaluation documentation shall contain all items of R 144-1, 7.1.1, and the operating manual shall clearly indicate the correct procedures (R 144-1, 7.1.3.4, 6.2)." pass_if "ocl{documentation_complete}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/drift-test.prl

@@ -0,0 +1,83 @@
+form r144-3/test-drift {
+  name "Stability with Time (Drift Test)"
+  description "Error over seven days with the smallest and largest CGMs (R 144-2, 1.3) — evidence for R 144-3, 3.8 \"Drift\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/drift-test
+  section "R 144-2, 1.3"
+  requirements { /req/metrological/drift }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.8"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.3"
+  ref definition "urn:oiml:pub:r:144-1:2013#clause-2.23"
+  field adjustment_means_used : string {
+    description "Adjustment means of the system under test (R 144-1, 4.8 addresses semi-automatic adjustment means)"
+    required true
+    bind model.classification.adjustment_means
+  }
+  field drift_series : array {
+    description "One series per CGM (smallest and largest volume fractions)"
+    required true
+    items { object fields {
+      field cgm_reference : number {
+        unit "ppm"
+        required true
+        measurement_method direct
+        symbol cgm_certified_value
+      }
+      field cgm_uncertainty : number {
+        description "Expanded uncertainty (k=2) of the CGM at this point — checked against the U:MPE ≤ 1:3 budget of R 144-1, 7.2.2.2 (reference-materials constraint)"
+        unit "ppm"
+        measurement_method direct
+        ref requirement "urn:oiml:pub:r:144-1:2013#clause-7.2.2.2"
+      }
+      field daily_measurements : array {
+        description "Measurements at least every 24 h over the 7-day period"
+        required true
+        items { object fields {
+          field day : integer {
+            required true
+          }
+          field indication : number {
+            unit "ppm"
+            required true
+            measurement_method direct
+            symbol indication
+          }
+          field error : number {
+            unit "ppm"
+            measurement_method computed
+            verdict drift_error
+          }
+          } }
+        min_items 7
+        series { axis day { unit "d" role time } cell { symbol indication unit "ppm" } }
+      }
+      field initial_indication : number {
+        description "Indication immediately after adjustment (day 0)"
+        unit "ppm"
+        required true
+        measurement_method direct
+      }
+      field mpe : number {
+        unit "ppm"
+        measurement_method lookup
+        calculation mpeIntrinsic
+        calculation_bindings { measured_value: cgm_reference }
+      }
+      field within_mpe_all_days : boolean {
+        measurement_method evaluated
+        true_label "Pass"
+        false_label "Fail"
+        evaluation { rule "ocl{daily_measurements->forAll(m | abs(m.error) <= abs(mpe))}" condition "|error| <= MPE on every day" }
+      }
+      } }
+  }
+  field drift_compensation_note : text {
+    description "If drift compensation is fitted, confirmation that its action produces no indication confusable with a measurement result (R 144-1, 4.8)"
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall remain within the maximum permissible intrinsic error for at least seven days from the moment of adjustment." pass_if "ocl{drift_series->forAll(s | s.within_mpe_all_days)}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/dry-heat-test.prl

@@ -0,0 +1,53 @@
+form r144-3/test-dry-heat {
+  name "Dry Heat Test"
+  description "Operation within MPE at 40 °C (or manufacturer maximum) for 2 h (R 144-2, 1.5) — evidence for R 144-3, 3.8 \"Temperature\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/dry-heat
+  section "R 144-2, 1.5"
+  requirements { /req/metrological/rated-conditions /req/metrological/mpe-operating }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.1"
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.3.2"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.5"
+  calculation_context { dimensions true }
+  field test_temperature : number {
+    description "Exposure temperature (40 °C or the manufacturer maximum operating temperature)"
+    unit "degC"
+    required true
+    measurement_method direct
+  }
+  field manufacturer_t_max : number {
+    unit "degC"
+    measurement_method declared
+    bind family.parameters.t_max
+  }
+  field exposure_duration_h : number {
+    description "Exposure duration after temperature stability (2 h; dT ≤ 1 °C/min, RH ≤ 50 %)"
+    unit "h"
+    required true
+    measurement_method direct
+  }
+  field measurements : array {
+    description "One set of measurements every half-hour with each CGM (R 144-2, 1.2)"
+    required true
+    subform_ref cgm-point { }
+  }
+  field mpe_basis : string {
+    measurement_method declared
+    specification_reference "R 144-1, 4.3.2"
+    default "max(5 ppm, 10 % of measured value)"
+  }
+  field within_mpe_operating : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/mpe-operating }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference)))}" condition "all |error| <= MPE on verification" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The reading shall remain within the MPE on verification under rated operating conditions (max(5 ppm, 10 %)) during 2 h at high temperature." pass_if "ocl{within_mpe_operating}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/error-determination.prl

@@ -0,0 +1,37 @@
+form r144-3/test-error-determination {
+  name "Error Determination"
+  description "Intrinsic error at 3+ points of the measuring range using CGMs (R 144-2, 1.2) — evidence for R 144-3, 3.8 \"Intrinsic error\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/error-determination
+  section "R 144-2, 1.2"
+  requirements { /req/metrological/mpe-intrinsic /req/metrological/measuring-range }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.3.1"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.2"
+  ref test-procedure "urn:oiml:pub:r:144-1:2013#clause-A.1.4"
+  calculation_context { dimensions true tables { cgm_test_points measuring_ranges } }
+  field calibration_characteristic : enum {
+    description "Calibration characteristic of the analyzer (3 points for linear, 5+ for nonlinear)"
+    required true
+    enum_values { linear nonlinear }
+  }
+  field test_points : array {
+    description "CGM test points (min +10 %, average ±10 %, max -10 % of range; uniformly distributed for nonlinear)"
+    required true
+    min_items 3
+    subform_ref cgm-point { }
+  }
+  field all_points_within_mpe : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/mpe-intrinsic }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{test_points->forAll(p | p.within_mpe)}" condition "all |error| <= MPE" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "No measurement error shall exceed the maximum permissible intrinsic error (max(2 ppm, 5 % of measured value)) at any test point." pass_if "ocl{all_points_within_mpe}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/esd-test.prl

@@ -0,0 +1,53 @@
+form r144-3/test-esd {
+  name "Electrostatic Discharge Test"
+  description "Electrostatic discharges, 6 kV contact / 8 kV air (R 144-2, 1.16) — evidence for R 144-3, 3.8 \"Electrostatic discharges\""
+  data_class FormInstance#data
+  header r144-3/header-b
+  conformance_process /conf/performance-tests/esd
+  section "R 144-2, 1.16"
+  requirements { /req/metrological/disturbances }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-4.5.4"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.16"
+  field contact_voltage_kv : number {
+    unit "kV"
+    required true
+    measurement_method direct
+    default 6
+  }
+  field air_voltage_kv : number {
+    unit "kV"
+    required true
+    measurement_method direct
+    default 8
+  }
+  field discharge_network : string {
+    measurement_method direct
+    default "150 pF via 330 Ω"
+  }
+  field discharges_applied : string {
+    description "At least ten successive discharges with ≥ 10 s interval (direct and indirect application)"
+    required true
+    measurement_method direct
+  }
+  field measurements : array {
+    description "Measurements during the test with the CGM of the largest volume fraction"
+    required true
+    subform_ref cgm-point { }
+  }
+  field fault_detected : boolean {
+    measurement_method direct
+  }
+  field within_limits_or_detected : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/metrological/disturbances }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{measurements->forAll(m | abs(m.error) <= max(5, 0.10 * abs(m.cgm_reference))) or fault_detected}" condition "|error| <= MPE on verification, or fault detected" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The error shall lie within the permissible limits, or the failure shall be detected by the checking facility (R 144-1, 4.5.4 d)." pass_if "ocl{within_limits_or_detected}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/flow-spillover-test.prl

@@ -0,0 +1,83 @@
+form r144-3/test-flow-spillover {
+  name "Spillover of Gas Flow Rates Test"
+  description "Gas flow indicator response at the minimum and maximum flow rates (R 144-2, 1.21)"
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/flow-spillover
+  section "R 144-2, 1.21"
+  requirements { /req/technical/gas-flow-monitoring /req/technical/gas-flow-meter }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-5.1.5"
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-5.5.2"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.21"
+  applicability {
+    sampling_approach: [extractive]
+  }
+  field flow_rate_nominal : number {
+    unit "L/min"
+    measurement_method declared
+    bind model.parameters.gas_flow_rate_nominal
+  }
+  field flow_rate_min : number {
+    unit "L/min"
+    required true
+    measurement_method declared
+    bind model.parameters.gas_flow_rate_min
+  }
+  field flow_rate_max : number {
+    unit "L/min"
+    required true
+    measurement_method declared
+    bind model.parameters.gas_flow_rate_max
+  }
+  field low_flow_run : object {
+    description "Reduce the flow from above the minimum until the low flow indicator responds (R 144-1, 5.1.5) and signals (5.5.2)"
+    required true
+    fields {
+      field flow_rate_at_signal : number {
+        unit "L/min"
+        required true
+        measurement_method direct
+      }
+      field indicator_responded : boolean {
+        required true
+        measurement_method direct
+      }
+      field signal_given : boolean {
+        required true
+        measurement_method direct
+      }
+      }
+  }
+  field high_flow_run : object {
+    description "Increase the flow from below the maximum until the indicator responds and signals"
+    required true
+    fields {
+      field flow_rate_at_signal : number {
+        unit "L/min"
+        required true
+        measurement_method direct
+      }
+      field indicator_responded : boolean {
+        required true
+        measurement_method direct
+      }
+      field signal_given : boolean {
+        required true
+        measurement_method direct
+      }
+      }
+  }
+  field indicator_ok : boolean {
+    required true
+    measurement_method evaluated
+    targets { /req/technical/gas-flow-monitoring }
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{low_flow_run.indicator_responded and low_flow_run.signal_given and high_flow_run.indicator_responded and high_flow_run.signal_given}" condition "Indicator responds and signals at both flow limits" }
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The low/high flow indicator shall respond (R 144-1, 5.1.5) and give the signal (R 144-1, 5.5.2) at both manufacturer flow limits." pass_if "ocl{indicator_ok}" }
+}
+

package/oiml-r144/execution/forms/sec-tests/leakproofness-test.prl

@@ -0,0 +1,41 @@
+form r144-3/test-leakproofness {
+  name "Leakproofness Test"
+  description "Air-tightness of the gas handling system per IEC 60068-2-17 pressure-gauge method (R 144-2, 1.22) — supports R 144-3, 3.7 \"Air-tightness\""
+  data_class FormInstance#data
+  header r144-3/header-a
+  conformance_process /conf/performance-tests/leakproofness
+  section "R 144-2, 1.22"
+  requirements { /req/technical/air-tightness }
+  ref requirement "urn:oiml:pub:r:144-1:2013#clause-5.1.7"
+  ref test-procedure "urn:oiml:pub:r:144-2:2013#clause-1.22"
+  applicability {
+    sampling_approach: [extractive]
+  }
+  field method : enum {
+    description "Pressure-gauge method used (per IEC 60068-2-17, as described in the operating manual)"
+    required true
+    measurement_method direct
+    enum_values { compression vacuum }
+  }
+  field test_pressure : number {
+    unit "kPa"
+    measurement_method direct
+  }
+  field hold_duration_min : number {
+    unit "min"
+    measurement_method direct
+  }
+  field leak_check_passed : boolean {
+    description "Gas handling system holds pressure per IEC 60068-2-17"
+    required true
+    measurement_method direct
+    targets { /req/technical/air-tightness }
+    true_label "Pass"
+    false_label "Fail"
+  }
+  field remarks : text {
+    
+  }
+  pass_fail { criteria "The gas handling system shall be air-tight (R 144-1, 5.1.7) per the IEC 60068-2-17 pressure-gauge (compression or vacuum) method." pass_if "ocl{leak_check_passed}" }
+}
+