@oimlsmart/primmel-packages 0.1.0

package/oiml-r60/specification/conformance/examination.prl

@@ -0,0 +1,183 @@
+conformance_class /conf/examinations {
+  title "Examination conformance tests"
+  name "Examination tests for load cells"
+  target /req/technical
+  subject "load cell examination"
+  description "Examination procedures for verifying compliance with technical requirements for markings, software, documentation, and suitability for testing."
+}
+
+conformance_test /conf/examinations/documentation {
+  name "Documentation review"
+  purpose "Verify that all required documentation has been submitted with the application for type evaluation."
+  method "Inspect the submitted documentation for completeness: general principle of measurement, mechanical drawings, electric/electronic diagrams, installation requirements, operating instructions, evidence of compliance, and software documentation (if applicable)."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.5" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.5" }
+  targets { /req/technical/mandatory-markings /req/technical/mandatory-additional-info /req/classification/complete-classification /req/classification/standard-classification /req/classification/multiple-classifications /req/classification/min-verification-interval /req/classification/supplementary-loading }
+  binds_to { model.aspects.application_documentation model.aspects.markings }
+  required_competence {
+    competence documentation_review {
+      description "Review of the applicant's documentation against the documentation requirements (R 60-2, 2.5)"
+    }
+  }
+  variables {
+    variable principle_of_measurement { type boolean source measured description "General principle of measurement documentation provided" }
+    variable mechanical_drawings { type boolean source measured description "Mechanical drawings provided" }
+    variable electric_diagrams { type boolean source measured description "Electric/electronic diagrams provided" }
+    variable installation_requirements { type boolean source measured description "Installation requirements provided" }
+    variable operating_instructions { type boolean source measured description "Operating instructions provided" }
+    variable evidence_of_compliance { type boolean source measured description "Evidence of compliance provided" }
+    variable software_documentation { type boolean source measured description "Software documentation provided (if applicable)" }
+    variable complete_classification { type boolean source measured description "Complete classification declared per R 60-1, 3.7" }
+    variable markings_present { type boolean source measured description "All mandatory markings present and correct" }
+  }
+  procedure {
+    1 "Verify all required documentation is submitted" outputs { principle_of_measurement mechanical_drawings electric_diagrams installation_requirements operating_instructions evidence_of_compliance software_documentation }
+    2 "Verify classification and markings declarations" outputs { complete_classification markings_present }
+  }
+  procedure_steps { review_manufacturer_documentation verify_completeness check_test_pattern_definition verify_applicant_information determine_pass_fail }
+  acceptance_criteria {
+    type qualitative
+    pass_if "ocl{principle_of_measurement and mechanical_drawings and electric_diagrams and installation_requirements and operating_instructions and evidence_of_compliance and complete_classification and markings_present}"
+    criterion "" { description "All required documentation submitted" reference "R 60-2, 2.5" }
+    criterion "" { description "Complete classification declared" reference "R 60-1, 3.7" }
+    criterion "" { description "Mandatory markings present" reference "R 60-1, 6.2" }
+  }
+  result_forms { documentation-examination }
+}
+
+conformance_test /conf/examinations/inscriptions {
+  name "Inscriptions examination"
+  purpose "Verify that all mandatory markings and designations are present, correct, and comply with the specified format."
+  method "Perform visual inspection of the load cell for all mandatory markings (manufacturer, model, serial number, E_max, year, type approval mark). Verify accuracy class symbol, load type designation, working temperature designation, humidity symbol, and n_LC designation comply with R 60-1, 6.2."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.6" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.6" }
+  targets { /req/technical/mandatory-markings /req/technical/class-designation /req/technical/load-type-designation /req/technical/humidity-designation /req/technical/temperature-designation /req/technical/nlc-designation }
+  binds_to { model.aspects.markings }
+  required_competence {
+    competence documentation_review {
+      description "Visual inspection of the instrument's inscriptions and marking against the mandatory-marking requirements (R 60-2, 2.6)"
+    }
+  }
+  variables {
+    variable manufacturer_marking { type boolean source measured description "Manufacturer name or trademark present" }
+    variable model_designation { type boolean source measured description "Model/type designation present" }
+    variable serial_number { type boolean source measured description "Serial number present" }
+    variable emax_marking { type boolean source measured description "E_max marked" }
+    variable year_marking { type boolean source measured description "Year of manufacture marked" }
+    variable accuracy_class_symbol { type boolean source measured description "Accuracy class symbol correct per R 60-1, 6.2.2" }
+    variable load_type_designation { type boolean source measured description "Load type designation correct" }
+    variable temperature_designation { type boolean source measured description "Working temperature designation correct" }
+    variable humidity_symbol { type boolean source measured description "Humidity symbol correct" }
+    variable nlc_designation { type boolean source measured description "n_LC designation present and correct" }
+  }
+  procedure {
+    1 "Visual inspection of all mandatory markings" outputs { manufacturer_marking model_designation serial_number emax_marking year_marking }
+    2 "Verify accuracy class, load type, temperature, humidity, and n_LC designations" outputs { accuracy_class_symbol load_type_designation temperature_designation humidity_symbol nlc_designation }
+  }
+  procedure_steps { check_mandatory_markings_per_6_2_1 check_mandatory_additional_info_per_6_2_2 check_non_mandatory_info_per_6_2_3 check_specific_markings_per_6_2_4 verify_legibility determine_pass_fail }
+  acceptance_criteria {
+    type qualitative
+    pass_if "ocl{manufacturer_marking and model_designation and serial_number and emax_marking and year_marking and accuracy_class_symbol and load_type_designation and temperature_designation and humidity_symbol and nlc_designation}"
+    criterion "" { description "All mandatory markings present" reference "R 60-1, 6.2.1" }
+    criterion "" { description "Accuracy class symbol correct" reference "R 60-1, 6.2.2" }
+    criterion "" { description "Load type designation correct" reference "R 60-1, 6.2.3" }
+    criterion "" { description "Temperature designation correct" reference "R 60-1, 6.2.4" }
+    criterion "" { description "Humidity symbol correct" reference "R 60-1, 6.2.5" }
+    criterion "" { description "n_LC designation correct" reference "R 60-1, 6.2.6" }
+  }
+  result_forms { marking-examination }
+}
+
+conformance_test /conf/examinations/software {
+  name "Software examination"
+  purpose "Verify that software sealing, identification, and protection comply with OIML D 31 requirements."
+  method "Inspect software documentation, verify legally relevant software identification, check sealing provisions (mechanical, electronic, or cryptographic), and verify compliance with OIML D 31 severity level I validation procedure A."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.6" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.6" }
+  targets { /req/technical/software }
+  binds_to { model.aspects.software model.aspects.sealing }
+  applicability {
+    technology: [analogue-active, digital]
+  }
+  required_competence {
+    competence software_examination {
+      method_standard "oiml-d-31"
+      description "Examination of the load cell's software and its documentation per OIML D 31 (R 60-2, 2.6)"
+    }
+    competence documentation_review {
+      description "Review of the software documentation and sealing arrangements (R 60-2, 2.6)"
+    }
+  }
+  variables {
+    variable software_identification { type boolean source measured description "Legally relevant software identified per OIML D 31" }
+    variable software_sealing { type boolean source measured description "Software sealing provisions verified (mechanical, electronic, or cryptographic)" }
+    variable d31_compliance { type boolean source measured description "Compliance with OIML D 31 severity level I, validation procedure A" }
+  }
+  procedure {
+    1 "Inspect software documentation" outputs { software_identification }
+    2 "Verify sealing provisions" outputs { software_sealing }
+    3 "Verify OIML D 31 compliance" outputs { d31_compliance }
+  }
+  procedure_steps { identify_software_components verify_software_identification check_sealing_arrangements verify_documentation_per_5_2_5 determine_pass_fail }
+  acceptance_criteria {
+    type qualitative
+    pass_if "ocl{software_identification and software_sealing and d31_compliance}"
+    criterion "" { description "Software identification verified" reference "OIML D 31" }
+    criterion "" { description "Software sealing verified" reference "R 60-1, 5.4" }
+    criterion "" { description "OIML D 31 compliance verified" reference "OIML D 31" }
+  }
+  result_forms { software-examination }
+}
+
+conformance_test /conf/examinations/suitability {
+  name "Suitability for testing"
+  purpose "Verify that the load cell is suitable for testing and that all necessary information and accessories have been provided."
+  method "Inspect the load cell for general design and construction quality. Verify that installation instructions and all necessary accessories have been provided. Confirm that the load cell can be properly mounted in the test apparatus."
+  type Inspection
+  kind performance
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.3" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.3" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.3.1" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4.1" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4.2" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4.3" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4.4" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4.5" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.4.6" }
+  reference { doc "urn:oiml:pub:r:60-2:2021" clause "2.6" }
+  targets { /req/technical/mandatory-additional-info }
+  binds_to { model.aspects.construction model.aspects.application_documentation }
+  required_competence {
+    competence documentation_review {
+      description "Examination of the type's construction suitability for the intended use and testability (R 60-2, 2.3)"
+    }
+  }
+  variables {
+    variable construction_quality { type boolean source measured description "General design and construction quality acceptable" }
+    variable installation_instructions { type boolean source measured description "Installation instructions provided" }
+    variable accessories_provided { type boolean source measured description "All necessary accessories provided" }
+    variable test_apparatus_compatible { type boolean source measured description "Load cell can be properly mounted in test apparatus" }
+  }
+  procedure {
+    1 "Inspect load cell for design and construction quality" outputs { construction_quality }
+    2 "Verify installation instructions and accessories" outputs { installation_instructions accessories_provided }
+    3 "Verify compatibility with test apparatus" outputs { test_apparatus_compatible }
+  }
+  procedure_steps { verify_load_cell_condition check_installation_provisions verify_mounting_hardware verify_indicating_instrument_provision determine_pass_fail }
+  acceptance_criteria {
+    type qualitative
+    pass_if "ocl{construction_quality and installation_instructions and accessories_provided and test_apparatus_compatible}"
+    criterion "" { description "Construction quality acceptable" reference "R 60-2, 2.6" }
+    criterion "" { description "Installation instructions and accessories provided" reference "R 60-2, 2.6" }
+    criterion "" { description "Compatible with test apparatus" reference "R 60-2, 2.6" }
+  }
+  result_forms { suitability-examination }
+}
+