@oimlsmart/primmel-packages 0.1.0

package/oiml-r60/execution/forms/sec-6-performance-tests/creep-dr.prl

@@ -0,0 +1,327 @@
+form r60-3/table-6.8 {
+  name "Creep DR"
+  description "Creep (C_C) and minimum dead load output return (C_DR)"
+  data_class FormInstance#data
+  header r60-3/header-a
+  conformance_process { /conf/metrological-tests/creep /conf/metrological-tests/dr }
+  section "R 60-3, 6.8"
+  requirements { /req/metrological/creep /req/metrological/creep-20-30 /req/metrological/dr }
+  ref requirement "urn:oiml:pub:r:60-1:2021#clause-5.5.1"
+  ref requirement "urn:oiml:pub:r:60-1:2021#clause-5.5.2"
+  ref test-procedure "urn:oiml:pub:r:60-2:2021#clause-2.10.2"
+  ref test-procedure "urn:oiml:pub:r:60-2:2021#clause-2.10.3"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.1.5"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.1.5.2"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.1.5.4"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.8"
+  ref report-format "urn:oiml:pub:r:60-3:2021#table-6"
+  calculation_context { dimensions true tables { mpe_tiers } }
+  field conversion_factor_f : number {
+    label "Conversion factor (f)"
+    definition "Ratio of indication change to load change at 75% of Max. Converts counts to verification units (v)."
+    unit "counts/v"
+    required true
+    measurement_method computed
+    bind sample.test_context.conversion_factor_f
+    symbol f
+    specification_reference "R 60-3, 2.1.2.4"
+    calculation conversionFactor
+    calculation_bindings { avgIndicationAt75pct: reference_indication_75pct indicationAtDmin: indication_at_dmin n: n_test_intervals }
+  }
+  field reference_indication_75pct : number {
+    label "Reference indication at 75%"
+    definition "Average indication at the 75% load point, used to compute f."
+    unit "counts"
+    required true
+    measurement_method direct
+  }
+  field indication_at_dmin : number {
+    label "Indication at D_min"
+    definition "Load cell indication at minimum test load (D_min) used to compute f."
+    unit "counts"
+    required true
+    measurement_method direct
+  }
+  field n_lc : integer {
+    label "Number of verification intervals (n_LC)"
+    definition "Maximum number of load cell verification intervals n_LC, declared by the manufacturer."
+    required true
+    measurement_method declared
+    bind group.parameters.n_lc
+    symbol nLC
+    specification_reference "R 60-1, 3.5.8"
+  }
+  field y : integer {
+    label "Relative v_min (Y)"
+    definition "Ratio of the maximum measuring range to v_min (Y = (E_max - E_min)/v_min)."
+    measurement_method declared
+    bind group.parameters.y
+    symbol Y
+    specification_reference "R 60-1, 3.5.15"
+  }
+  field emax : number {
+    label "Maximum capacity (E_max)"
+    definition "Maximum capacity of the load cell."
+    unit "g, kg, or t"
+    required true
+    measurement_method declared
+    bind model.parameters.e_max
+    symbol Emax
+    specification_reference "R 60-1, 3.5.5"
+  }
+  field emin : number {
+    label "Minimum dead load (E_min)"
+    definition "Minimum dead load of the load cell."
+    unit "g, kg, or t"
+    measurement_method declared
+    bind family.parameters.e_min
+    symbol Emin
+    specification_reference "R 60-1, 3.5.9"
+  }
+  field vmin : number {
+    label "Minimum verification interval (v_min)"
+    definition "Minimum load cell verification interval."
+    unit "g, kg, or t"
+    required true
+    measurement_method declared
+    bind group.parameters.v_min
+    symbol vmin
+    specification_reference "R 60-1, 3.5.11"
+  }
+  field n_test_intervals : number {
+    label "Verification intervals of the tested range (n)"
+    definition "Number of verification intervals of the measuring range under test — (E_max − E_min)/v_min when the test spans the classified range (R 60-3, 2.1.2.4). Input n of the conversion-factor calculation."
+    measurement_method derived
+    symbol n
+    specification_reference "R 60-3, 2.1.2.4"
+    derivation "ocl{(emax - emin) / vmin}"
+  }
+  field dmin : number {
+    label "Minimum test load (D_min)"
+    definition "The minimum test load (dead load) applied during the creep test."
+    unit "g, kg, or t"
+    required true
+    measurement_method declared
+    bind sample.test_context.d_min
+    symbol Dmin
+  }
+  field dmax : number {
+    label "Maximum test load (D_max)"
+    definition "The maximum test load applied during the creep test."
+    unit "g, kg, or t"
+    required true
+    measurement_method declared
+    bind sample.test_context.d_max
+    symbol Dmax
+  }
+  field initial_dmin_indication : number {
+    label "Initial D_min indication"
+    definition "The load cell indication (counts) at D_min before the creep load is applied. Reference point for DR calculation."
+    unit "counts"
+    measurement_method direct
+  }
+  field initial_dmax_indication : number {
+    label "Initial D_max indication"
+    definition "The load cell indication (counts) at D_max immediately after loading. Reference point for creep calculation."
+    unit "counts"
+    measurement_method direct
+  }
+  field creep_readings : array {
+    label "Creep readings"
+    definition "Time-series indication readings during the creep test at D_max (and D_min). Creep is the change in indication over time under constant load."
+    items { object fields {
+      field test_load : string {
+        label "Test load"
+        definition "The load applied at this reading point: D_min or D_max."
+        measurement_method declared
+      }
+      field indication_counts : number {
+        label "Indication (counts)"
+        definition "Load cell indication reading at this time point."
+        unit "counts"
+        measurement_method direct
+      }
+      field elapsed_min : number {
+        label "Elapsed time (min)"
+        definition "Time elapsed since the initial D_max loading, in minutes. The numeric time axis of the series — verdicts address readings by it (t = 20, t = 30 per R 60-3, 2.1.5.2), never by string matching or by extreme value."
+        unit "min"
+        measurement_method direct
+        specification_reference "R 60-3, 2.1.5.2"
+      }
+      field indication_time : string {
+        label "Indication time"
+        definition "Absolute time of the reading (HH:MM:SS)."
+        measurement_method direct
+        pattern "\\d{2}:\\d{2}:\\d{2}"
+      }
+      field barometric_pressure : number {
+        label "Barometric pressure"
+        definition "Atmospheric pressure at time of reading, for correction if needed."
+        unit "kPa"
+        measurement_method direct
+      }
+      field change_v : number {
+        label "Creep change (v)"
+        definition "Change in indication from the initial D_max loading, divided by f, in verification units."
+        unit "v"
+        measurement_method derived
+        symbol CC
+        specification_reference "R 60-3, 2.1.5"
+        calculation creep
+        calculation_bindings { indicationAtTime: indication_counts initialIndication: initial_dmax_indication conversion_factor_f: conversion_factor_f }
+      }
+      field elapsed_time : string {
+        label "Elapsed time"
+        definition "Time elapsed since the initial D_max loading (mm:ss) — recorded display companion of the numeric elapsed_min axis (verdicts address readings by elapsed_min, never by this string)."
+        measurement_method direct
+      }
+      } }
+    series { axis elapsed_min { unit "min" role time } cell { symbol change_v unit "v" } }
+  }
+  field dr_readings : array {
+    label "DR readings"
+    definition "Minimum dead load output return measurements after the creep test. DR is the difference between the final and initial D_min indications."
+    items { object fields {
+      field indication_counts : number {
+        label "Indication (counts)"
+        definition "Load cell indication after returning to D_min."
+        unit "counts"
+        measurement_method direct
+      }
+      field indication_time : string {
+        label "Time"
+        definition "Absolute time of DR reading (HH:MM:SS)."
+        measurement_method direct
+        pattern "\\d{2}:\\d{2}:\\d{2}"
+      }
+      field barometric_pressure : number {
+        label "Barometric pressure"
+        definition "Atmospheric pressure at time of DR reading."
+        unit "kPa"
+        measurement_method direct
+      }
+      field change_v : number {
+        label "DR change (v)"
+        definition "Change from initial D_min indication, divided by f. This is the dead load output return C_DR."
+        unit "v"
+        measurement_method derived
+        symbol CDR
+        specification_reference "R 60-3, 2.1.5.4"
+        calculation deadLoadOutputReturn
+        calculation_bindings { minLoadIndication2: indication_counts minLoadIndication1: initial_dmin_indication conversion_factor_f: conversion_factor_f }
+      }
+      } }
+  }
+  field max_creep_change_v : number {
+    label "Maximum creep change (v)"
+    definition "Maximum creep change across all D_max readings in verification units."
+    unit "v"
+    measurement_method derived
+    symbol CC
+    derivation "ocl{creep_readings->collect(r | r.change_v)->max()}"
+  }
+  field creep_30min : number {
+    label "Creep at 30 min (v)"
+    definition "Creep change at exactly the 30-minute reading, in verification units."
+    unit "v"
+    measurement_method derived
+    symbol CC
+    specification_reference "R 60-3, 2.1.5.2"
+    derivation "ocl{reading_at(window(creep_readings->select(r | r.test_load = 'D_max'), 'elapsed_min', 20, 30), 'elapsed_min', 30, 'change_v')}"
+  }
+  field creep_20min : number {
+    label "Creep at 20 min (v)"
+    definition "Creep change at the 20-minute reading, in verification units."
+    unit "v"
+    measurement_method derived
+    symbol CC
+    specification_reference "R 60-3, 2.1.5.2"
+    derivation "ocl{reading_at(window(creep_readings->select(r | r.test_load = 'D_max'), 'elapsed_min', 20, 30), 'elapsed_min', 20, 'change_v')}"
+  }
+  field creep_30_20_diff : number {
+    label "Creep 30-20 difference (v)"
+    definition "Difference between creep at 30 min and 20 min per R 60-3, 2.1.5.2."
+    unit "v"
+    measurement_method derived
+    symbol CC-30-20
+    specification_reference "R 60-3, 2.1.5.2"
+    derivation "ocl{creep_30min - creep_20min}"
+  }
+  field mpe_at_dmax : number {
+    label "MPE at D_max (v), p_LC = 0.7"
+    definition "Maximum permissible error at D_max with p_LC forced to 0.7 for creep evaluation per R 60-1, 5.5.1."
+    unit "v"
+    measurement_method lookup
+    symbol MPE
+    specification_reference "R 60-1, 5.5.1"
+    calculation mpe
+    calculation_bindings { load: dmax accuracy_class: accuracy_class p_lc: plc_for_creep }
+  }
+  field plc_for_creep : number {
+    label "Apportionment factor for creep"
+    definition "Apportionment factor fixed at 0.7 for creep MPE evaluation per R 60-1, 5.5.1."
+    measurement_method declared
+    default 0.7
+  }
+  field dr_value : number {
+    label "DR value (v)"
+    definition "Final dead load output return value in verification units."
+    unit "v"
+    measurement_method derived
+    symbol CDR
+    derivation "ocl{dr_readings->collect(r | r.change_v)->last()}"
+  }
+  field actual_time_s : number {
+    label "Actual test duration"
+    definition "Duration of the creep test in seconds."
+    unit "s"
+    measurement_method direct
+  }
+  field specified_time_s : number {
+    label "Specified test duration"
+    definition "Required test duration per R 60-2 in seconds."
+    unit "s"
+    measurement_method declared
+    specification_reference "R 60-2, 2.10.2"
+  }
+  field mpe_for_dr : number {
+    label "MPE for DR"
+    definition "Maximum permissible error for DR evaluation = 0.5 v."
+    unit "v"
+    measurement_method declared
+    specification_reference "R 60-1, 5.5.2"
+  }
+  field creep_30min_result : boolean {
+    label "30-min creep result"
+    definition "Whether the total creep over 30 minutes is within 0.7 x |MPE| at D_max."
+    measurement_method evaluated
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{abs(max_creep_change_v) <= 0.7 * abs(mpe_at_dmax)}" condition "|C_C(30 min)| <= 0.7 x |MPE|" specification_reference "R 60-1, 5.5.1" }
+  }
+  field creep_20_30_result : boolean {
+    label "20-30 min creep result"
+    definition "Whether the creep change between 20 and 30 minutes is within 0.15 x |MPE|."
+    measurement_method evaluated
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{abs(creep_30min - creep_20min) <= 0.15 * abs(mpe_at_dmax)}" condition "|C_C(30-20)| <= 0.15 x |MPE|" specification_reference "R 60-1, 5.5.1" }
+  }
+  field dr_half_v_result : boolean {
+    label "DR <= 0.5 v result"
+    definition "Whether the dead load output return does not exceed 0.5 v."
+    measurement_method evaluated
+    true_label "Pass"
+    false_label "Fail"
+    evaluation { rule "ocl{if actual_time_s / specified_time_s <= 1 then abs(dr_value) <= 0.5 else abs(dr_value) <= 0.5 * (1 - (actual_time_s / specified_time_s - 1)) endif}" condition "|C_DR| <= 0.5(1 - (x-1)) v with x = actual time/specified time (relaxed rule for 100-150 % loading times, R 60-3, 2.1.5.6)" specification_reference "R 60-3, 2.1.5.6" }
+  }
+  field dr_within_manuf_spec_result : boolean {
+    label "DR within manufacturer spec"
+    definition "Whether DR is within the manufacturer's specified DR value (if different from 0.5 v) — assessed by the evaluator against the declared group DR; no machine-computable rule (the declared DR is a group-level characteristic outside this form's sample scope)."
+    measurement_method declared
+    true_label "Pass"
+    false_label "Fail"
+  }
+  pass_fail { criteria "30-min creep C_C(t) <= 0.7 * |MPE|; 20-30 min difference C_C(30-20) <= 0.15 * |MPE|; C_DR <= 0.5 v (if time intervals met)" pass_if "ocl{creep_30min_result and creep_20_30_result and dr_half_v_result}" }
+}
+

package/oiml-r60/execution/forms/sec-6-performance-tests/emc-susceptibility.prl

@@ -0,0 +1,115 @@
+form r60-3/form-6.17 {
+  name "EMC Susceptibility"
+  description "Electromagnetic susceptibility test"
+  data_class FormInstance#data
+  header r60-3/header-a
+  conformance_process /conf/electronic-tests/emc-susceptibility
+  section "R 60-3, 6.17"
+  requirements { /req/electronic/disturbances }
+  ref requirement "urn:oiml:pub:r:60-1:2021#clause-5.7.2.5"
+  ref test-procedure "urn:oiml:pub:r:60-2:2021#clause-2.10.7.9"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.7"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.7.1"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.7.2"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.7.3"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.7.4"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.17"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.17.1"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.17.2"
+  ref report-format "urn:oiml:pub:r:60-3:2021#table-23"
+  field conversion_factor_f : number {
+    label "Conversion Factor F"
+    unit "counts/v"
+    required true
+    bind sample.test_context.conversion_factor_f
+    targets { /req/electronic/disturbances }
+  }
+  field dmin_value : number {
+    label "Dmin Value"
+    unit "g, kg, or t"
+    bind sample.test_context.d_min
+    targets { /req/electronic/disturbances }
+  }
+  field rate_of_sweep : string {
+    label "Rate Of Sweep"
+    targets { /req/electronic/disturbances }
+  }
+  field test_load : number {
+    label "Test Load"
+    unit "g, kg, or t"
+    targets { /req/electronic/disturbances }
+  }
+  field test_load_material : string {
+    label "Test Load Material"
+    targets { /req/electronic/disturbances }
+  }
+  field without_disturbance : object {
+    label "Without Disturbance"
+    targets { /req/electronic/disturbances }
+    fields {
+      field indication : number {
+        label "Indication"
+        unit "counts"
+      }
+      field difference : number {
+        label "Difference"
+        unit "v"
+      }
+      }
+  }
+  field disturbance_results : array {
+    label "Disturbance Results"
+    targets { /req/electronic/disturbances /req/electronic/no-significant-faults }
+    items { object fields {
+      field antenna : string {
+        label "Antenna"
+      }
+      field frequency_range_mhz : string {
+        label "Frequency Range Mhz"
+        description "e.g. 80-3000 MHz"
+      }
+      field polarisation : enum {
+        label "Polarisation"
+        values { vertical { label "Vertical" } horizontal { label "Horizontal" } }
+      }
+      field facing : enum {
+        label "Facing"
+        values { front { label "Front" } right { label "Right" } left { label "Left" } rear { label "Rear" } }
+      }
+      field indication : number {
+        label "Indication"
+        unit "counts"
+      }
+      field difference : number {
+        label "Difference"
+        unit "v"
+        calculation "ocl{(indication - without_disturbance.indication) / conversion_factor_f}"
+      }
+      field significant_fault : boolean {
+        label "Significant Fault"
+        true_label "Yes"
+        false_label "No"
+        calculation "ocl{abs(difference) > 1}"
+      }
+      field remarks : string {
+        label "Remarks"
+      }
+      } }
+  }
+  field test_setup_description : text {
+    label "Test Setup Description"
+    description "Form 6.17.2 - description of test setup"
+    targets { /req/electronic/disturbances }
+  }
+  field remarks : text {
+    label "Remarks"
+  }
+  field overall_result : boolean {
+    label "Overall Result"
+    required true
+    true_label "Pass"
+    false_label "Fail"
+  }
+  pass_fail { criteria "No significant fault (> v_min)" pass_if "ocl{disturbance_results->forAll(r | not r.significant_fault)}" }
+}
+

package/oiml-r60/execution/forms/sec-6-performance-tests/esd.prl

@@ -0,0 +1,224 @@
+form r60-3/form-6.16 {
+  name "ESD"
+  description "Electrostatic discharge test - direct and indirect application"
+  data_class FormInstance#data
+  header r60-3/header-a
+  conformance_process /conf/electronic-tests/esd
+  section "R 60-3, 6.16"
+  requirements { /req/electronic/disturbances }
+  ref requirement "urn:oiml:pub:r:60-1:2021#clause-5.7.2.5"
+  ref test-procedure "urn:oiml:pub:r:60-2:2021#clause-2.10.7.8"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.6"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.6.1"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.6.2"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.6.3"
+  ref calculation "urn:oiml:pub:r:60-3:2021#clause-2.2.6.4"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.16"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.16.1"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.16.2"
+  ref report-format "urn:oiml:pub:r:60-3:2021#clause-6.16.3"
+  ref report-format "urn:oiml:pub:r:60-3:2021#table-20"
+  ref report-format "urn:oiml:pub:r:60-3:2021#table-21"
+  ref report-format "urn:oiml:pub:r:60-3:2021#table-22"
+  field conversion_factor_f : number {
+    label "Conversion Factor F"
+    unit "counts/v"
+    required true
+    bind sample.test_context.conversion_factor_f
+    targets { /req/electronic/disturbances }
+  }
+  field dmin_value : number {
+    label "Dmin Value"
+    unit "g, kg, or t"
+    bind sample.test_context.d_min
+    targets { /req/electronic/disturbances }
+  }
+  field discharge_types : object {
+    label "Discharge Types"
+    targets { /req/electronic/disturbances }
+    fields {
+      field contact_discharges : boolean {
+        label "Contact Discharges"
+        true_label "Yes"
+        false_label "No"
+      }
+      field paint_penetration : boolean {
+        label "Paint Penetration"
+        true_label "Yes"
+        false_label "No"
+      }
+      field air_discharges : boolean {
+        label "Air Discharges"
+        true_label "Yes"
+        false_label "No"
+      }
+      field polarity : enum {
+        label "Polarity"
+        values { positive { label "Positive" } negative { label "Negative" } }
+      }
+      }
+  }
+  field direct_application : array {
+    label "Direct Application"
+    description "Form 6.16.1 - direct application"
+    targets { /req/electronic/disturbances /req/electronic/no-significant-faults }
+    items { object fields {
+      field test_load : number {
+        label "Test Load"
+        unit "g, kg, or t"
+      }
+      field test_voltage_kv : number {
+        label "Test Voltage Kv"
+        unit "kV"
+      }
+      field no_of_discharges : integer {
+        label "No Of Discharges"
+        description ">= 10"
+      }
+      field repetition_interval_s : number {
+        label "Repetition Interval S"
+        unit "s"
+      }
+      field indication_without : number {
+        label "Indication Without Disturbance"
+        unit "counts"
+        measurement_method direct
+      }
+      field indication : number {
+        label "Indication"
+        unit "counts"
+      }
+      field difference : number {
+        label "Difference"
+        unit "v"
+        calculation "ocl{(indication - indication_without) / conversion_factor_f}"
+      }
+      field significant_fault : boolean {
+        label "Significant Fault"
+        true_label "Yes"
+        false_label "No"
+        calculation "ocl{abs(difference) > 1}"
+      }
+      field remarks : string {
+        label "Remarks"
+      }
+      } }
+  }
+  field horizontal_coupling_plane : array {
+    label "Horizontal Coupling Plane"
+    description "Form 6.16.2.1 - horizontal coupling plane"
+    targets { /req/electronic/disturbances /req/electronic/no-significant-faults }
+    items { object fields {
+      field test_load : number {
+        label "Test Load"
+        unit "g, kg, or t"
+      }
+      field test_voltage_kv : number {
+        label "Test Voltage Kv"
+        unit "kV"
+      }
+      field no_of_discharges : integer {
+        label "No Of Discharges"
+      }
+      field repetition_interval_s : number {
+        label "Repetition Interval S"
+        unit "s"
+      }
+      field indication_without : number {
+        label "Indication Without Disturbance"
+        unit "counts"
+        measurement_method direct
+      }
+      field indication : number {
+        label "Indication"
+        unit "counts"
+      }
+      field difference : number {
+        label "Difference"
+        unit "v"
+        calculation "ocl{(indication - indication_without) / conversion_factor_f}"
+      }
+      field significant_fault : boolean {
+        label "Significant Fault"
+        true_label "Yes"
+        false_label "No"
+        calculation "ocl{abs(difference) > 1}"
+      }
+      field remarks : string {
+        label "Remarks"
+      }
+      } }
+  }
+  field vertical_coupling_plane : array {
+    label "Vertical Coupling Plane"
+    description "Form 6.16.2.2 - vertical coupling plane"
+    targets { /req/electronic/disturbances /req/electronic/no-significant-faults }
+    items { object fields {
+      field test_load : number {
+        label "Test Load"
+        unit "g, kg, or t"
+      }
+      field test_voltage_kv : number {
+        label "Test Voltage Kv"
+        unit "kV"
+      }
+      field no_of_discharges : integer {
+        label "No Of Discharges"
+      }
+      field repetition_interval_s : number {
+        label "Repetition Interval S"
+        unit "s"
+      }
+      field indication_without : number {
+        label "Indication Without Disturbance"
+        unit "counts"
+        measurement_method direct
+      }
+      field indication : number {
+        label "Indication"
+        unit "counts"
+      }
+      field difference : number {
+        label "Difference"
+        unit "v"
+        calculation "ocl{(indication - indication_without) / conversion_factor_f}"
+      }
+      field significant_fault : boolean {
+        label "Significant Fault"
+        true_label "Yes"
+        false_label "No"
+        calculation "ocl{abs(difference) > 1}"
+      }
+      field remarks : string {
+        label "Remarks"
+      }
+      } }
+  }
+  field test_points : object {
+    label "Test Points"
+    description "Form 6.16.3 - specification of test points"
+    targets { /req/electronic/disturbances }
+    fields {
+      field direct_contact_discharges : text {
+        label "Direct Contact Discharges"
+      }
+      field direct_air_discharges : text {
+        label "Direct Air Discharges"
+      }
+      field indirect_application : text {
+        label "Indirect Application"
+      }
+      }
+  }
+  field remarks : text {
+    label "Remarks"
+  }
+  field overall_result : boolean {
+    label "Overall Result"
+    required true
+    true_label "Pass"
+    false_label "Fail"
+  }
+  pass_fail { criteria "No significant fault (> v_min)" pass_if "ocl{direct_application->forAll(r | not r.significant_fault) and horizontal_coupling_plane->forAll(r | not r.significant_fault) and vertical_coupling_plane->forAll(r | not r.significant_fault)}" }
+}
+