rubygl 0.2.1 → 0.3.0

data/ext/macosx/SDL2.framework/Versions/Current/Headers/SDL_mutex.h

@@ -0,0 +1,251 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2014 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef _SDL_mutex_h
+#define _SDL_mutex_h
+
+/**
+ *  \file SDL_mutex.h
+ *
+ *  Functions to provide thread synchronization primitives.
+ */
+
+#include "SDL_stdinc.h"
+#include "SDL_error.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  Synchronization functions which can time out return this value
+ *  if they time out.
+ */
+#define SDL_MUTEX_TIMEDOUT  1
+
+/**
+ *  This is the timeout value which corresponds to never time out.
+ */
+#define SDL_MUTEX_MAXWAIT   (~(Uint32)0)
+
+
+/**
+ *  \name Mutex functions
+ */
+/* @{ */
+
+/* The SDL mutex structure, defined in SDL_sysmutex.c */
+struct SDL_mutex;
+typedef struct SDL_mutex SDL_mutex;
+
+/**
+ *  Create a mutex, initialized unlocked.
+ */
+extern DECLSPEC SDL_mutex *SDLCALL SDL_CreateMutex(void);
+
+/**
+ *  Lock the mutex.
+ *
+ *  \return 0, or -1 on error.
+ */
+#define SDL_mutexP(m)   SDL_LockMutex(m)
+extern DECLSPEC int SDLCALL SDL_LockMutex(SDL_mutex * mutex);
+
+/**
+ *  Try to lock the mutex
+ *
+ *  \return 0, SDL_MUTEX_TIMEDOUT, or -1 on error
+ */
+extern DECLSPEC int SDLCALL SDL_TryLockMutex(SDL_mutex * mutex);
+
+/**
+ *  Unlock the mutex.
+ *
+ *  \return 0, or -1 on error.
+ *
+ *  \warning It is an error to unlock a mutex that has not been locked by
+ *           the current thread, and doing so results in undefined behavior.
+ */
+#define SDL_mutexV(m)   SDL_UnlockMutex(m)
+extern DECLSPEC int SDLCALL SDL_UnlockMutex(SDL_mutex * mutex);
+
+/**
+ *  Destroy a mutex.
+ */
+extern DECLSPEC void SDLCALL SDL_DestroyMutex(SDL_mutex * mutex);
+
+/* @} *//* Mutex functions */
+
+
+/**
+ *  \name Semaphore functions
+ */
+/* @{ */
+
+/* The SDL semaphore structure, defined in SDL_syssem.c */
+struct SDL_semaphore;
+typedef struct SDL_semaphore SDL_sem;
+
+/**
+ *  Create a semaphore, initialized with value, returns NULL on failure.
+ */
+extern DECLSPEC SDL_sem *SDLCALL SDL_CreateSemaphore(Uint32 initial_value);
+
+/**
+ *  Destroy a semaphore.
+ */
+extern DECLSPEC void SDLCALL SDL_DestroySemaphore(SDL_sem * sem);
+
+/**
+ *  This function suspends the calling thread until the semaphore pointed
+ *  to by \c sem has a positive count. It then atomically decreases the
+ *  semaphore count.
+ */
+extern DECLSPEC int SDLCALL SDL_SemWait(SDL_sem * sem);
+
+/**
+ *  Non-blocking variant of SDL_SemWait().
+ *
+ *  \return 0 if the wait succeeds, ::SDL_MUTEX_TIMEDOUT if the wait would
+ *          block, and -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_SemTryWait(SDL_sem * sem);
+
+/**
+ *  Variant of SDL_SemWait() with a timeout in milliseconds.
+ *
+ *  \return 0 if the wait succeeds, ::SDL_MUTEX_TIMEDOUT if the wait does not
+ *          succeed in the allotted time, and -1 on error.
+ *
+ *  \warning On some platforms this function is implemented by looping with a
+ *           delay of 1 ms, and so should be avoided if possible.
+ */
+extern DECLSPEC int SDLCALL SDL_SemWaitTimeout(SDL_sem * sem, Uint32 ms);
+
+/**
+ *  Atomically increases the semaphore's count (not blocking).
+ *
+ *  \return 0, or -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_SemPost(SDL_sem * sem);
+
+/**
+ *  Returns the current count of the semaphore.
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_SemValue(SDL_sem * sem);
+
+/* @} *//* Semaphore functions */
+
+
+/**
+ *  \name Condition variable functions
+ */
+/* @{ */
+
+/* The SDL condition variable structure, defined in SDL_syscond.c */
+struct SDL_cond;
+typedef struct SDL_cond SDL_cond;
+
+/**
+ *  Create a condition variable.
+ *
+ *  Typical use of condition variables:
+ *
+ *  Thread A:
+ *    SDL_LockMutex(lock);
+ *    while ( ! condition ) {
+ *        SDL_CondWait(cond, lock);
+ *    }
+ *    SDL_UnlockMutex(lock);
+ *
+ *  Thread B:
+ *    SDL_LockMutex(lock);
+ *    ...
+ *    condition = true;
+ *    ...
+ *    SDL_CondSignal(cond);
+ *    SDL_UnlockMutex(lock);
+ *
+ *  There is some discussion whether to signal the condition variable
+ *  with the mutex locked or not.  There is some potential performance
+ *  benefit to unlocking first on some platforms, but there are some
+ *  potential race conditions depending on how your code is structured.
+ *
+ *  In general it's safer to signal the condition variable while the
+ *  mutex is locked.
+ */
+extern DECLSPEC SDL_cond *SDLCALL SDL_CreateCond(void);
+
+/**
+ *  Destroy a condition variable.
+ */
+extern DECLSPEC void SDLCALL SDL_DestroyCond(SDL_cond * cond);
+
+/**
+ *  Restart one of the threads that are waiting on the condition variable.
+ *
+ *  \return 0 or -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_CondSignal(SDL_cond * cond);
+
+/**
+ *  Restart all threads that are waiting on the condition variable.
+ *
+ *  \return 0 or -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_CondBroadcast(SDL_cond * cond);
+
+/**
+ *  Wait on the condition variable, unlocking the provided mutex.
+ *
+ *  \warning The mutex must be locked before entering this function!
+ *
+ *  The mutex is re-locked once the condition variable is signaled.
+ *
+ *  \return 0 when it is signaled, or -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex);
+
+/**
+ *  Waits for at most \c ms milliseconds, and returns 0 if the condition
+ *  variable is signaled, ::SDL_MUTEX_TIMEDOUT if the condition is not
+ *  signaled in the allotted time, and -1 on error.
+ *
+ *  \warning On some platforms this function is implemented by looping with a
+ *           delay of 1 ms, and so should be avoided if possible.
+ */
+extern DECLSPEC int SDLCALL SDL_CondWaitTimeout(SDL_cond * cond,
+                                                SDL_mutex * mutex, Uint32 ms);
+
+/* @} *//* Condition variable functions */
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* _SDL_mutex_h */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/ext/macosx/SDL2.framework/Versions/Current/Headers/SDL_name.h

@@ -0,0 +1,33 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2014 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef _SDLname_h_
+#define _SDLname_h_
+
+#if defined(__STDC__) || defined(__cplusplus)
+#define NeedFunctionPrototypes 1
+#endif
+
+#define SDL_NAME(X) SDL_##X
+
+#endif /* _SDLname_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */