ruby-bullet 0.0.1-x86-linux

data/deps/include/bullet/BulletDynamics/ConstraintSolver/btSolve2LinearConstraint.h

@@ -0,0 +1,107 @@
+/*
+Bullet Continuous Collision Detection and Physics Library
+Copyright (c) 2003-2006 Erwin Coumans  http://continuousphysics.com/Bullet/
+
+This software is provided 'as-is', without any express or implied warranty.
+In no event will the authors be held liable for any damages arising from the use of this software.
+Permission is granted to anyone to use this software for any purpose, 
+including commercial applications, and to alter it and redistribute it freely, 
+subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef BT_SOLVE_2LINEAR_CONSTRAINT_H
+#define BT_SOLVE_2LINEAR_CONSTRAINT_H
+
+#include "LinearMath/btMatrix3x3.h"
+#include "LinearMath/btVector3.h"
+
+
+class btRigidBody;
+
+
+
+/// constraint class used for lateral tyre friction.
+class	btSolve2LinearConstraint
+{
+	btScalar	m_tau;
+	btScalar	m_damping;
+
+public:
+
+	btSolve2LinearConstraint(btScalar tau,btScalar damping)
+	{
+		m_tau = tau;
+		m_damping = damping;
+	}
+	//
+	// solve unilateral constraint (equality, direct method)
+	//
+	void resolveUnilateralPairConstraint(		
+														   btRigidBody* body0,
+		btRigidBody* body1,
+
+		const btMatrix3x3& world2A,
+						const btMatrix3x3& world2B,
+						
+						const btVector3& invInertiaADiag,
+						const btScalar invMassA,
+						const btVector3& linvelA,const btVector3& angvelA,
+						const btVector3& rel_posA1,
+						const btVector3& invInertiaBDiag,
+						const btScalar invMassB,
+						const btVector3& linvelB,const btVector3& angvelB,
+						const btVector3& rel_posA2,
+
+					  btScalar depthA, const btVector3& normalA, 
+					  const btVector3& rel_posB1,const btVector3& rel_posB2,
+					  btScalar depthB, const btVector3& normalB, 
+					  btScalar& imp0,btScalar& imp1);
+
+
+	//
+	// solving 2x2 lcp problem (inequality, direct solution )
+	//
+	void resolveBilateralPairConstraint(
+			btRigidBody* body0,
+						btRigidBody* body1,
+		const btMatrix3x3& world2A,
+						const btMatrix3x3& world2B,
+						
+						const btVector3& invInertiaADiag,
+						const btScalar invMassA,
+						const btVector3& linvelA,const btVector3& angvelA,
+						const btVector3& rel_posA1,
+						const btVector3& invInertiaBDiag,
+						const btScalar invMassB,
+						const btVector3& linvelB,const btVector3& angvelB,
+						const btVector3& rel_posA2,
+
+					  btScalar depthA, const btVector3& normalA, 
+					  const btVector3& rel_posB1,const btVector3& rel_posB2,
+					  btScalar depthB, const btVector3& normalB, 
+					  btScalar& imp0,btScalar& imp1);
+
+/*
+	void resolveAngularConstraint(	const btMatrix3x3& invInertiaAWS,
+						const btScalar invMassA,
+						const btVector3& linvelA,const btVector3& angvelA,
+						const btVector3& rel_posA1,
+						const btMatrix3x3& invInertiaBWS,
+						const btScalar invMassB,
+						const btVector3& linvelB,const btVector3& angvelB,
+						const btVector3& rel_posA2,
+
+					  btScalar depthA, const btVector3& normalA, 
+					  const btVector3& rel_posB1,const btVector3& rel_posB2,
+					  btScalar depthB, const btVector3& normalB, 
+					  btScalar& imp0,btScalar& imp1);
+
+*/
+
+};
+
+#endif //BT_SOLVE_2LINEAR_CONSTRAINT_H

data/deps/include/bullet/BulletDynamics/ConstraintSolver/btSolverBody.h

@@ -0,0 +1,191 @@
+/*
+Bullet Continuous Collision Detection and Physics Library
+Copyright (c) 2003-2006 Erwin Coumans  http://continuousphysics.com/Bullet/
+
+This software is provided 'as-is', without any express or implied warranty.
+In no event will the authors be held liable for any damages arising from the use of this software.
+Permission is granted to anyone to use this software for any purpose, 
+including commercial applications, and to alter it and redistribute it freely, 
+subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef BT_SOLVER_BODY_H
+#define BT_SOLVER_BODY_H
+
+class	btRigidBody;
+#include "LinearMath/btVector3.h"
+#include "LinearMath/btMatrix3x3.h"
+#include "BulletDynamics/Dynamics/btRigidBody.h"
+#include "LinearMath/btAlignedAllocator.h"
+#include "LinearMath/btTransformUtil.h"
+
+///Until we get other contributions, only use SIMD on Windows, when using Visual Studio 2008 or later, and not double precision
+#ifdef BT_USE_SSE
+#define USE_SIMD 1
+#endif //
+
+
+#ifdef USE_SIMD
+
+struct	btSimdScalar
+{
+	SIMD_FORCE_INLINE	btSimdScalar()
+	{
+
+	}
+
+	SIMD_FORCE_INLINE	btSimdScalar(float	fl)
+	:m_vec128 (_mm_set1_ps(fl))
+	{
+	}
+
+	SIMD_FORCE_INLINE	btSimdScalar(__m128 v128)
+		:m_vec128(v128)
+	{
+	}
+	union
+	{
+		__m128		m_vec128;
+		float		m_floats[4];
+		int			m_ints[4];
+		btScalar	m_unusedPadding;
+	};
+	SIMD_FORCE_INLINE	__m128	get128()
+	{
+		return m_vec128;
+	}
+
+	SIMD_FORCE_INLINE	const __m128	get128() const
+	{
+		return m_vec128;
+	}
+
+	SIMD_FORCE_INLINE	void	set128(__m128 v128)
+	{
+		m_vec128 = v128;
+	}
+
+	SIMD_FORCE_INLINE	operator       __m128()       
+	{ 
+		return m_vec128; 
+	}
+	SIMD_FORCE_INLINE	operator const __m128() const 
+	{ 
+		return m_vec128; 
+	}
+	
+	SIMD_FORCE_INLINE	operator float() const 
+	{ 
+		return m_floats[0]; 
+	}
+
+};
+
+///@brief Return the elementwise product of two btSimdScalar
+SIMD_FORCE_INLINE btSimdScalar 
+operator*(const btSimdScalar& v1, const btSimdScalar& v2) 
+{
+	return btSimdScalar(_mm_mul_ps(v1.get128(),v2.get128()));
+}
+
+///@brief Return the elementwise product of two btSimdScalar
+SIMD_FORCE_INLINE btSimdScalar 
+operator+(const btSimdScalar& v1, const btSimdScalar& v2) 
+{
+	return btSimdScalar(_mm_add_ps(v1.get128(),v2.get128()));
+}
+
+
+#else
+#define btSimdScalar btScalar
+#endif
+
+///The btSolverBody is an internal datastructure for the constraint solver. Only necessary data is packed to increase cache coherence/performance.
+ATTRIBUTE_ALIGNED64 (struct)	btSolverBodyObsolete
+{
+	BT_DECLARE_ALIGNED_ALLOCATOR();
+	btVector3		m_deltaLinearVelocity;
+	btVector3		m_deltaAngularVelocity;
+	btVector3		m_angularFactor;
+	btVector3		m_invMass;
+	btRigidBody*	m_originalBody;
+	btVector3		m_pushVelocity;
+	btVector3		m_turnVelocity;
+
+	
+	SIMD_FORCE_INLINE void	getVelocityInLocalPointObsolete(const btVector3& rel_pos, btVector3& velocity ) const
+	{
+		if (m_originalBody)
+			velocity = m_originalBody->getLinearVelocity()+m_deltaLinearVelocity + (m_originalBody->getAngularVelocity()+m_deltaAngularVelocity).cross(rel_pos);
+		else
+			velocity.setValue(0,0,0);
+	}
+
+	SIMD_FORCE_INLINE void	getAngularVelocity(btVector3& angVel) const
+	{
+		if (m_originalBody)
+			angVel = m_originalBody->getAngularVelocity()+m_deltaAngularVelocity;
+		else
+			angVel.setValue(0,0,0);
+	}
+
+
+	//Optimization for the iterative solver: avoid calculating constant terms involving inertia, normal, relative position
+	SIMD_FORCE_INLINE void applyImpulse(const btVector3& linearComponent, const btVector3& angularComponent,const btScalar impulseMagnitude)
+	{
+		//if (m_invMass)
+		{
+			m_deltaLinearVelocity += linearComponent*impulseMagnitude;
+			m_deltaAngularVelocity += angularComponent*(impulseMagnitude*m_angularFactor);
+		}
+	}
+
+	SIMD_FORCE_INLINE void internalApplyPushImpulse(const btVector3& linearComponent, const btVector3& angularComponent,btScalar impulseMagnitude)
+	{
+		if (m_originalBody)
+		{
+			m_pushVelocity += linearComponent*impulseMagnitude;
+			m_turnVelocity += angularComponent*(impulseMagnitude*m_angularFactor);
+		}
+	}
+	
+	void	writebackVelocity()
+	{
+		if (m_originalBody)
+		{
+			m_originalBody->setLinearVelocity(m_originalBody->getLinearVelocity()+ m_deltaLinearVelocity);
+			m_originalBody->setAngularVelocity(m_originalBody->getAngularVelocity()+m_deltaAngularVelocity);
+			
+			//m_originalBody->setCompanionId(-1);
+		}
+	}
+
+
+	void	writebackVelocity(btScalar timeStep)
+	{
+        (void) timeStep;
+		if (m_originalBody)
+		{
+			m_originalBody->setLinearVelocity(m_originalBody->getLinearVelocity()+ m_deltaLinearVelocity);
+			m_originalBody->setAngularVelocity(m_originalBody->getAngularVelocity()+m_deltaAngularVelocity);
+			
+			//correct the position/orientation based on push/turn recovery
+			btTransform newTransform;
+			btTransformUtil::integrateTransform(m_originalBody->getWorldTransform(),m_pushVelocity,m_turnVelocity,timeStep,newTransform);
+			m_originalBody->setWorldTransform(newTransform);
+			
+			//m_originalBody->setCompanionId(-1);
+		}
+	}
+	
+
+
+};
+
+#endif //BT_SOLVER_BODY_H
+
+

data/deps/include/bullet/BulletDynamics/ConstraintSolver/btSolverConstraint.h

@@ -0,0 +1,98 @@
+/*
+Bullet Continuous Collision Detection and Physics Library
+Copyright (c) 2003-2006 Erwin Coumans  http://continuousphysics.com/Bullet/
+
+This software is provided 'as-is', without any express or implied warranty.
+In no event will the authors be held liable for any damages arising from the use of this software.
+Permission is granted to anyone to use this software for any purpose, 
+including commercial applications, and to alter it and redistribute it freely, 
+subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef BT_SOLVER_CONSTRAINT_H
+#define BT_SOLVER_CONSTRAINT_H
+
+class	btRigidBody;
+#include "LinearMath/btVector3.h"
+#include "LinearMath/btMatrix3x3.h"
+#include "btJacobianEntry.h"
+
+//#define NO_FRICTION_TANGENTIALS 1
+#include "btSolverBody.h"
+
+
+///1D constraint along a normal axis between bodyA and bodyB. It can be combined to solve contact and friction constraints.
+ATTRIBUTE_ALIGNED64 (struct)	btSolverConstraint
+{
+	BT_DECLARE_ALIGNED_ALLOCATOR();
+
+	btVector3		m_relpos1CrossNormal;
+	btVector3		m_contactNormal;
+
+	btVector3		m_relpos2CrossNormal;
+	//btVector3		m_contactNormal2;//usually m_contactNormal2 == -m_contactNormal
+
+	btVector3		m_angularComponentA;
+	btVector3		m_angularComponentB;
+	
+	mutable btSimdScalar	m_appliedPushImpulse;
+	mutable btSimdScalar	m_appliedImpulse;
+	
+	
+	btScalar	m_friction;
+	btScalar	m_jacDiagABInv;
+	union
+	{
+		int	m_numConsecutiveRowsPerKernel;
+		btScalar	m_unusedPadding0;
+	};
+
+	int	m_overrideNumSolverIterations;
+
+	union
+	{
+		int			m_frictionIndex;
+		btScalar	m_unusedPadding1;
+	};
+	union
+	{
+		btRigidBody*	m_solverBodyA;
+		int				m_companionIdA;
+	};
+	union
+	{
+		btRigidBody*	m_solverBodyB;
+		int				m_companionIdB;
+	};
+	
+	union
+	{
+		void*		m_originalContactPoint;
+		btScalar	m_unusedPadding4;
+	};
+
+	btScalar		m_rhs;
+	btScalar		m_cfm;
+	btScalar		m_lowerLimit;
+	btScalar		m_upperLimit;
+
+	btScalar		m_rhsPenetration;
+
+	enum		btSolverConstraintType
+	{
+		BT_SOLVER_CONTACT_1D = 0,
+		BT_SOLVER_FRICTION_1D
+	};
+};
+
+typedef btAlignedObjectArray<btSolverConstraint>	btConstraintArray;
+
+
+#endif //BT_SOLVER_CONSTRAINT_H
+
+
+