odoo-forge-bundle 0.1.0

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/manufacturing/basic_setup/one_step_manufacturing.md

@@ -0,0 +1,157 @@
+---
+title: "One-step manufacturing"
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/manufacturing/basic_setup/one_step_manufacturing.html"
+---
+
+======================
+# One-step manufacturing
+
+.. _manufacturing/management/one_step_manufacturing:
+.. |BOM| replace:: :abbr:`BoM (Bill of Materials)`
+.. |MO| replace:: :abbr:`MO (Manufacturing Order)`
+
+Odoo *Manufacturing* allows users to manufacture products using one, two, or three steps. When using
+one-step manufacturing, Odoo creates a manufacturing order (MO), but does not generate transfers for
+the movement of components out of inventory or finished products into stock. Inventory counts still
+update based on the number of components used and products manufactured, but the act of transferring
+them to and from inventory is not tracked.
+
+> **tip**:
+>    The number of steps used in manufacturing is set at the warehouse level, allowing for each
+   warehouse to use a different number of steps. To change the number of steps used for a specific
+   warehouse, begin by navigating to :menuselection:`Inventory --> Configuration --> Warehouses`,
+   and then select a warehouse from the :guilabel:`Warehouses` screen.
+
+   On the :guilabel:`Warehouse Configuration` tab, find the :guilabel:`Manufacture` radio input
+   field, and select one of the three options: :guilabel:`Manufacture (1 step)`, :guilabel:`Pick
+   components and then manufacture (2 steps)`, or :guilabel:`Pick components, manufacture and then
+   store products (3 steps)`.
+
+   .. image:: one_step_manufacturing/manufacturing-type.png
+      :align: center
+      :alt: The Manufacture radio input field on a warehouse configuration page.
+
+> **important**:
+>    Products must be properly configured before they can be manufactured in Odoo. For details on how
+   to do so, see the documentation on how to :ref:`configure a product for manufacturing
+   <manufacturing/management/configure-manufacturing-product>`.
+
+# Create manufacturing order
+
+To manufacture a product in Odoo *Manufacturing*, begin by navigating to
+:menuselection:`Manufacturing --> Operations --> Manufacturing Orders`, and then click
+:guilabel:`New` to create a new |MO|.
+
+On the new |MO|, select the product to be produced from the :guilabel:`Product` drop-down menu. The
+:guilabel:`Bill of Material` field auto-populates with the associated bill of materials (BoM).
+
+If a product has more than one |BOM| configured for it, the specific |BOM| can be selected in the
+:guilabel:`Bill of Material` field, and the :guilabel:`Product` field auto-populates with the
+associated product.
+
+After a |BOM| has been selected, the :guilabel:`Components` and :guilabel:`Work Orders` tabs
+auto-populate with the components and operations specified on the |BOM|. If additional components or
+operations are required for the |MO| being configured, add them to the :guilabel:`Components` and
+:guilabel:`Work Orders` tabs by clicking :guilabel:`Add a line`.
+
+Finally, click :guilabel:`Confirm` to confirm the |MO|.
+
+# Process manufacturing order
+
+An |MO| is processed by completing all of the work orders listed under its :guilabel:`Work Orders`
+tab. This can be done on the |MO| itself, or from the work order tablet view.
+
+## Basic workflow
+
+To complete work orders from the |MO| itself, begin by navigating to :menuselection:`Manufacturing
+--> Operations --> Manufacturing Orders`, and then select an |MO|.
+
+On the |MO| page, select the :guilabel:`Work Orders` tab. Once work begins on the first work order
+that needs to be completed, click the :guilabel:`Start` button for that work order. Odoo
+*Manufacturing* then starts a timer that keeps track of how long the work order takes to complete.
+
+.. image:: one_step_manufacturing/start-button.png
+   :align: center
+   :alt: The Start button for an operation on a manufacturing order.
+
+When the work order is completed, click the :guilabel:`Done` button for that work order. Repeat the
+same process for each work order listed on the :guilabel:`Work Orders` tab.
+
+.. image:: one_step_manufacturing/done-button.png
+   :align: center
+   :alt: The Done button for an operation on a manufacturing order.
+
+After completing all of the work orders, click :guilabel:`Produce All` at the top of the screen to
+mark the |MO| as :guilabel:`Done`, and register the manufactured product(s) into inventory.
+
+## Shop Floor workflow
+
+To complete the work orders for an |MO| using the *Shop Floor* module, begin by navigating to
+:menuselection:`Manufacturing --> Operations --> Manufacturing Orders`, and then select an |MO|.
+
+On the |MO|, click on the :guilabel:`Work Orders` tab, and then select the :guilabel:`↗️ (square
+with arrow coming out of it)` button on the line of the first work order to be processed. Doing so
+opens a :guilabel:`Work Orders` pop-up window, with details and processing options for the work
+order.
+
+On the pop-up window, select the :guilabel:`Open Shop Floor` button at the top-left of the window to
+open the *Shop Floor* module.
+
+.. image:: one_step_manufacturing/shop-floor-button.png
+   :align: center
+   :alt: The Open Shop Floor button for a work order on a manufacturing order.
+
+When accessed directly from a specific work order within an |MO|, *Shop Floor* defaults to the page
+for the work center where the work order is configured to be carried out. The page shows a card for
+the work order that displays the |MO| number, the product and number of units to be produced, and
+the steps required to complete the work order.
+
+.. image:: one_step_manufacturing/work-order-card.png
+   :align: center
+   :alt: A work order card on a work center page in the Shop Floor module.
+
+A work order is processed by completing each step listed on its card. This can be done by clicking
+on a step and following the instructions listed on the pop-up window that appears. Once the step is
+completed, click :guilabel:`Next` to move on to the next step, if any are required.
+
+Alternatively, work order steps can be completed by clicking the checkbox that appears on the right
+side of the step's line on the work order card. When using this method, the step is automatically
+marked as completed, without a pop-up window appearing.
+
+The final step on a work order card is titled *Register Production*. This step is used to register
+the number of product units that were produced. If the number produced is equal to the number that
+the |MO| was created for, click the :guilabel:`# Units` button on the right side of the line to
+automatically register that number as the quantity produced.
+
+If a different number must be entered, click the :guilabel:`Register Production` step to open a
+pop-up window. Enter the number of units produced in the :guilabel:`Units` field, and then click
+:guilabel:`Validate` to register that number.
+
+> **note**:
+>    The *Register Production* step appears on every work order card. It must be completed for the
+   first work order that is processed. After doing so, the step appears as already completed for
+   each remaining work order in the |MO|.
+
+After completing all of the steps for a work order, a button appears on the footer of the work order
+card. If any other work orders must be completed before the |MO| can be closed, the button is titled
+:guilabel:`Mark as Done`. If there are no additional work orders to complete, the button is titled
+:guilabel:`Close Production`.
+
+Clicking :guilabel:`Mark as Done` causes the work order card to fade away. Once it disappears
+completely, the work order's status is marked as *Finished* on the |MO|, and the next work order
+appears in the *Shop Floor* module, on the page of the work center where it is configured to be
+carried out. Any additional work orders can be processed using the instructions detailed in this
+section.
+
+Clicking :guilabel:`Close Production` causes the work order card to fade away. Once it disappears,
+the |MO| is marked as *Done*, and the units of the product that were produced are entered into
+inventory.
+
+After clicking :guilabel:`Mark as Done` or :guilabel:`Close Production`, each button is replaced by
+an :guilabel:`Undo` button. Click the :guilabel:`Undo` button before the work order card fades away
+to keep the work order open.
+
+> **tip**:
+>    This section details the basic workflow for processing an |MO| in the *Shop Floor* module. For a
+   more in-depth explanation of the module and all of its features, please see the :ref:`Shop Floor
+   overview <manufacturing/shop_floor/shop_floor_overview>` documentation.

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/manufacturing/basic_setup/three_step_manufacturing.md

@@ -0,0 +1,191 @@
+---
+title: "Three-step manufacturing"
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/manufacturing/basic_setup/three_step_manufacturing.html"
+---
+
+========================
+# Three-step manufacturing
+
+.. _manufacturing/management/two_step_manufacturing:
+.. |BOM| replace:: :abbr:`BoM (Bill of Materials)`
+.. |MO| replace:: :abbr:`MO (Manufacturing Order)`
+
+Odoo *Manufacturing* allows users to manufacture products using one, two, or three steps. When using
+three-step manufacturing, Odoo creates a pick components transfer, a manufacturing order (MO), and a
+store finished products transfer, and updates inventory counts based on the number of components
+removed, and finished products created.
+
+> **tip**:
+>    The number of steps used in manufacturing is set at the warehouse level, allowing for each
+   warehouse to use a different number of steps. To change the number of steps used for a specific
+   warehouse, begin by navigating to :menuselection:`Inventory --> Configuration --> Warehouses`,
+   and then select a warehouse from the :guilabel:`Warehouses` screen.
+
+   On the :guilabel:`Warehouse Configuration` tab, find the :guilabel:`Manufacture` radio input
+   field, and select one of the three options: :guilabel:`Manufacture (1 step)`, :guilabel:`Pick
+   components and then manufacture (2 steps)`, or :guilabel:`Pick components, manufacture and then
+   store products (3 steps)`.
+
+   .. image:: three_step_manufacturing/manufacturing-type.png
+      :align: center
+      :alt: The Manufacture radio input field on a warehouse configuration page.
+
+> **important**:
+>    Products must be properly configured before they can be manufactured in Odoo. For details on how
+   to do so, see the documentation on how to :ref:`configure a product for manufacturing
+   <manufacturing/management/configure-manufacturing-product>`.
+
+# Create manufacturing order
+
+To manufacture a product in Odoo *Manufacturing*, begin by navigating to
+:menuselection:`Manufacturing --> Operations --> Manufacturing Orders`, and then click
+:guilabel:`New` to create a new |MO|.
+
+On the new |MO|, select the product to be produced from the :guilabel:`Product` drop-down menu. The
+:guilabel:`Bill of Material` field auto-populates with the associated Bill of Materials (BoM).
+
+If a product has more than one |BOM| configured for it, the specific |BOM| can be selected in the
+:guilabel:`Bill of Material` field, and the :guilabel:`Product` field auto-populates with the
+associated product.
+
+After a |BOM| has been selected, the :guilabel:`Components` and :guilabel:`Work Orders` tabs
+auto-populate with the components and operations specified on the |BOM|. If additional components or
+operations are required for the |MO| being configured, add them to the :guilabel:`Components` and
+:guilabel:`Work Orders` tabs by clicking :guilabel:`Add a line`.
+
+Finally, click :guilabel:`Confirm` to confirm the |MO|.
+
+# Process pick components transfer
+
+After confirming a three-step |MO|, a :guilabel:`Transfers` smart button appears at the top of the
+page. Click it to be taken to the :guilabel:`Transfers` page for the |MO|. The page lists two
+transfers: *WH/PC/XXXXX* (the pick components transfer), and *WH/SFP/XXXXX* (the store finished
+products transfer).
+
+Select :guilabel:`WH/PC/XXXXX` to open the pick components transfer for the |MO|. This transfer is
+used to track the movement of components from the locations where they are stored to the location
+where they are used to manufacture the product.
+
+After transferring the components out of their storage location, click :guilabel:`Validate` at the
+top of the transfer, followed by :guilabel:`Apply` on the :guilabel:`Immediate Transfer?` pop-up
+window that appears. Doing so marks the transfer as :guilabel:`Done`, and updates inventory counts
+to reflect the quantity of components transferred.
+
+Finally, return to the |MO| by clicking the :guilabel:`WH/MO/XXXXX` breadcrumb at the top of the
+page.
+
+.. image:: three_step_manufacturing/mo-bread-crumb.png
+   :align: center
+   :alt: The manufacturing order bread crumb on a pick components transfer.
+
+# Process manufacturing order
+
+An |MO| is processed by completing all of the work orders listed under its :guilabel:`Work Orders`
+tab. This can be done on the |MO| itself, or from the work order tablet view.
+
+## Basic workflow
+
+To complete work orders from the |MO| itself, begin by navigating to :menuselection:`Manufacturing
+--> Operations --> Manufacturing Orders`, and then select a manufacturing order.
+
+On the |MO| page, select the :guilabel:`Work Orders` tab. Once work begins on the first work order
+that needs to be completed, click the :guilabel:`Start` button for that work order. Odoo
+*Manufacturing* then starts a timer that keeps track of how long the work order takes to complete.
+
+.. image:: three_step_manufacturing/start-button-2.png
+   :align: center
+   :alt: The Start button for a work order on a manufacturing order.
+
+When the work order is completed, click the :guilabel:`Done` button for that work order. Repeat the
+same process for each work order listed on the :guilabel:`Work Orders` tab.
+
+.. image:: three_step_manufacturing/done-button.png
+   :align: center
+   :alt: The Done button for an work order on a manufacturing order.
+
+After completing all of the work orders, click :guilabel:`Produce All` at the top of the screen to
+mark the |MO| as :guilabel:`Done`, and register the manufactured product(s) into inventory.
+
+## Shop Floor workflow
+
+To complete the work orders for an |MO| using the *Shop Floor* module, begin by navigating to
+:menuselection:`Manufacturing --> Operations --> Manufacturing Orders`, and then select an |MO|.
+
+On the |MO|, click on the :guilabel:`Work Orders` tab, and then select the :guilabel:`↗️ (square
+with arrow coming out of it)` button on the line of the first work order to be processed. Doing so
+opens a :guilabel:`Work Orders` pop-up window, with details and processing options for the work
+order.
+
+On the pop-up window, select the :guilabel:`Open Shop Floor` button at the top-left of the window to
+open the *Shop Floor* module.
+
+.. image:: three_step_manufacturing/shop-floor-button.png
+   :align: center
+   :alt: The Open Shop Floor button for a work order on a manufacturing order.
+
+When accessed directly from a specific work order within an |MO|, *Shop Floor* defaults to the page
+for the work center where the work order is configured to be carried out. The page shows a card for
+the work order that displays the |MO| number, the product and number of units to be produced, and
+the steps required to complete the work order.
+
+.. image:: three_step_manufacturing/work-order-card.png
+   :align: center
+   :alt: A work order card on a work center page in the Shop Floor module.
+
+A work order is processed by completing each step listed on its card. This can be done by clicking
+on a step, and following the instructions listed on the pop-up window that appears. Once the step is
+completed, click :guilabel:`Next` to move on to the next step, if any are required.
+
+Alternatively, work order steps can be completed by clicking the checkbox that appears on the right
+side of the step's line on the work order card. When using this method, the step is automatically
+marked as completed, without a pop-up window appearing.
+
+The final step on a work order card is titled *Register Production*. This step is used to register
+the number of product units that were produced. If the number produced is equal to the number that
+the |MO| was created for, click the :guilabel:`# Units` button on the right side of the line to
+automatically register that number as the quantity produced.
+
+If a different number must be entered, click the :guilabel:`Register Production` step to open a
+pop-up window. Enter the number of units produced in the :guilabel:`Units` field, and then click
+:guilabel:`Validate` to register that number.
+
+> **note**:
+>    The *Register Production* step appears on every work order card. It must be completed for the
+   first work order that is processed. After doing so, the step appears as already completed for
+   each remaining work order in the |MO|.
+
+After completing all of the steps for a work order, a button appears on the footer of the work order
+card. If any other work orders must be completed before the |MO| can be closed, the button is titled
+:guilabel:`Mark as Done`. If there are no additional work orders to complete, the button is titled
+:guilabel:`Close Production`.
+
+Clicking :guilabel:`Mark as Done` causes the work order card to fade away. Once it disappears
+completely, the work order's status is marked as *Finished* on the |MO|, and the next work order
+appears in the *Shop Floor* module, on the page of the work center where it is configured to be
+carried out. Any additional work orders can be processed using the instructions detailed in this
+section.
+
+Clicking :guilabel:`Close Production` causes the work order card to fade away. Once it disappears,
+the |MO| is marked as *Done*, and the units of the product that were produced are entered into
+inventory.
+
+After clicking :guilabel:`Mark as Done` or :guilabel:`Close Production`, each button is replaced by
+an :guilabel:`Undo` button. Click the :guilabel:`Undo` button before the work order card fades away
+to keep the work order open.
+
+> **tip**:
+>    This section details the basic workflow for processing an |MO| in the *Shop Floor* module. For a
+   more in-depth explanation of the module and all of its features, please see the :ref:`Shop Floor
+   overview <manufacturing/shop_floor/shop_floor_overview>` documentation.
+
+# Process finished product transfer
+
+After completing the |MO|, return to the order's :guilabel:`Transfers` page by clicking the
+:guilabel:`Transfers` button at the top of the order. This time, select :guilabel:`WH/SFP/XXXXX` to
+open the store finished products transfer. This transfer is used to track the movement of finished
+products from the location where they were manufactured to the location where they are stored.
+
+After transferring the finished products to their storage location, click :guilabel:`Validate` at
+the top of the transfer, followed by :guilabel:`Apply` on the :guilabel:`Immediate Transfer?` pop-up
+window that appears. Doing so marks the transfer as :guilabel:`Done`, and updates inventory counts
+to reflect the quantity of finished products transferred.

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/manufacturing/basic_setup/two_step_manufacturing.md

@@ -0,0 +1,176 @@
+---
+title: "Two-step manufacturing"
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/manufacturing/basic_setup/two_step_manufacturing.html"
+---
+
+======================
+# Two-step manufacturing
+
+.. _manufacturing/management/one_step_manufacturing:
+.. |BOM| replace:: :abbr:`BoM (Bill of Materials)`
+.. |MO| replace:: :abbr:`MO (Manufacturing Order)`
+
+Odoo *Manufacturing* allows users to manufacture products using one, two, or three steps. When using
+two-step manufacturing, Odoo creates a manufacturing order (MO) and a pick components transfer, but
+does not generate a transfer for the movement of finished products into stock. Inventory counts
+still update based on the number of products manufactured, but the act of transferring them to and
+from inventory is not tracked.
+
+> **tip**:
+>    The number of steps used in manufacturing is set at the warehouse level, allowing for each
+   warehouse to use a different number of steps. To change the number of steps used for a specific
+   warehouse, begin by navigating to :menuselection:`Inventory --> Configuration --> Warehouses`,
+   and then select a warehouse from the :guilabel:`Warehouses` screen.
+
+   On the :guilabel:`Warehouse Configuration` tab, find the :guilabel:`Manufacture` radio input
+   field, and select one of the three options: :guilabel:`Manufacture (1 step)`, :guilabel:`Pick
+   components and then manufacture (2 steps)`, or :guilabel:`Pick components, manufacture and then
+   store products (3 steps)`.
+
+   .. image:: two_step_manufacturing/manufacturing-type.png
+      :align: center
+      :alt: The Manufacture radio input field on a warehouse configuration page.
+
+> **important**:
+>    Products must be properly configured before they can be manufactured in Odoo. For details on how
+   to do so, see the documentation on how to :ref:`configure a product for manufacturing
+   <manufacturing/management/configure-manufacturing-product>`.
+
+# Create manufacturing order
+
+To manufacture a product in Odoo *Manufacturing*, begin by navigating to
+:menuselection:`Manufacturing --> Operations --> Manufacturing Orders`, and then click
+:guilabel:`New` to create a new |MO|.
+
+On the new |MO|, select the product to be produced from the :guilabel:`Product` drop-down menu. The
+:guilabel:`Bill of Material` field auto-populates with the associated Bill of Materials (BoM).
+
+If a product has more than one |BOM| configured for it, the specific |BOM| can be selected in the
+:guilabel:`Bill of Material` field, and the :guilabel:`Product` field auto-populates with the
+associated product.
+
+After a |BOM| has been selected, the :guilabel:`Components` and :guilabel:`Work Orders` tabs
+auto-populate with the components and operations specified on the |BOM|. If additional components or
+operations are required for the |MO| being configured, add them to the :guilabel:`Components` and
+:guilabel:`Work Orders` tabs by clicking :guilabel:`Add a line`.
+
+Finally, click :guilabel:`Confirm` to confirm the |MO|.
+
+# Process pick components transfer
+
+After confirming a two-step |MO|, a :guilabel:`Transfers` smart button appears at the top of the
+page. Click it to open the pick components transfer for the |MO|. This transfer is used to track the
+movement of components from the locations where they are stored to the location where they are used
+to manufacture the product.
+
+After transferring the components out of their storage location, click :guilabel:`Validate` at the
+top of the transfer, followed by :guilabel:`Apply` on the :guilabel:`Immediate Transfer?` pop-up
+window that appears. Doing so marks the transfer as :guilabel:`Done`, and updates inventory counts
+to reflect the quantity of components transferred.
+
+Finally, return to the |MO| by clicking the :guilabel:`WH/MO/XXXXX` breadcrumb at the top of the
+page.
+
+.. image:: two_step_manufacturing/mo-bread-crumb.png
+   :align: center
+   :alt: The manufacturing order bread crumb on a pick components transfer.
+
+# Process manufacturing order
+
+An |MO| is processed by completing all of the work orders listed under its :guilabel:`Work Orders`
+tab. This can be done on the |MO| itself, or from the work order tablet view.
+
+## Basic workflow
+
+To complete work orders from the |MO| itself, begin by navigating to :menuselection:`Manufacturing
+--> Operations --> Manufacturing Orders`, and then select an |MO|.
+
+On the |MO| page, select the :guilabel:`Work Orders` tab. Once work begins on the first work order
+that needs to be completed, click the :guilabel:`Start` button for that operation. Odoo
+*Manufacturing* then starts a timer that keeps track of how long the work order takes to complete.
+
+.. image:: two_step_manufacturing/start-button.png
+   :align: center
+   :alt: The Start button for an work order on a manufacturing order.
+
+When the work order is completed, click the :guilabel:`Done` button for that work order. Repeat the
+same process for each work order listed on the :guilabel:`Work Orders` tab.
+
+.. image:: two_step_manufacturing/done-button.png
+   :align: center
+   :alt: The Done button for a work order on a manufacturing order.
+
+After completing all of the work orders, click :guilabel:`Produce All` at the top of the screen to
+mark the |MO| as :guilabel:`Done`, and register the manufactured product(s) into inventory.
+
+## Shop Floor workflow
+
+To complete the work orders for an |MO| using the *Shop Floor* module, begin by navigating to
+:menuselection:`Manufacturing --> Operations --> Manufacturing Orders`, and then select an |MO|.
+
+On the |MO|, click on the :guilabel:`Work Orders` tab, and then select the :guilabel:`↗️ (square
+with arrow coming out of it)` button on the line of the first work order to be processed. Doing so
+opens a :guilabel:`Work Orders` pop-up window, with details and processing options for the work
+order.
+
+On the pop-up window, select the :guilabel:`Open Shop Floor` button at the top-left of the window to
+open the *Shop Floor* module.
+
+.. image:: two_step_manufacturing/shop-floor-button.png
+   :align: center
+   :alt: The Open Shop Floor button for a work order on a manufacturing order.
+
+When accessed directly from a specific work order within an |MO|, *Shop Floor* defaults to the page
+for the work center where the work order is configured to be carried out. The page shows a card for
+the work order that displays the |MO| number, the product and number of units to be produced, and
+the steps required to complete the work order.
+
+.. image:: two_step_manufacturing/work-order-card.png
+   :align: center
+   :alt: A work order card on a work center page in the Shop Floor module.
+
+A work order is processed by completing each step listed on its card. This can be done by clicking
+on a step and following the instructions listed on the pop-up window that appears. Once the step is
+completed, click :guilabel:`Next` to move on to the next step, if any are required.
+
+Alternatively, work order steps can be completed by clicking the checkbox that appears on the right
+side of the step's line on the work order card. When using this method, the step is automatically
+marked as completed, without a pop-up window appearing.
+
+The final step on a work order card is titled *Register Production*. This step is used to register
+the number of product units that were produced. If the number produced is equal to the number that
+the |MO| was created for, click the :guilabel:`# Units` button on the right side of the line to
+automatically register that number as the quantity produced.
+
+If a different number must be entered, click the :guilabel:`Register Production` step to open a
+pop-up window. Enter the number of units produced in the :guilabel:`Units` field, and then click
+:guilabel:`Validate` to register that number.
+
+> **note**:
+>    The *Register Production* step appears on every work order card. It must be completed for the
+   first work order that is processed. After doing so, the step appears as already completed for
+   each remaining work order in the |MO|.
+
+After completing all of the steps for a work order, a button appears on the footer of the work order
+card. If any other work orders must be completed before the |MO| can be closed, the button is titled
+:guilabel:`Mark as Done`. If there are no additional work orders to complete, the button is titled
+:guilabel:`Close Production`.
+
+Clicking :guilabel:`Mark as Done` causes the work order card to fade away. Once it disappears
+completely, the work order's status is marked as *Finished* on the |MO|, and the next work order
+appears in the *Shop Floor* module, on the page of the work center where it is configured to be
+carried out. Any additional work orders can be processed using the instructions detailed in this
+section.
+
+Clicking :guilabel:`Close Production` causes the work order card to fade away. Once it disappears,
+the |MO| is marked as *Done*, and the units of the product that were produced are entered into
+inventory.
+
+After clicking :guilabel:`Mark as Done` or :guilabel:`Close Production`, each button is replaced by
+an :guilabel:`Undo` button. Click the :guilabel:`Undo` button before the work order card fades away
+to keep the work order open.
+
+> **tip**:
+>    This section details the basic workflow for processing an |MO| in the *Shop Floor* module. For a
+   more in-depth explanation of the module and all of its features, please see the :ref:`Shop Floor
+   overview <manufacturing/shop_floor/shop_floor_overview>` documentation.

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/manufacturing/basic_setup.md

@@ -0,0 +1,18 @@
+---
+title: ""
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/manufacturing/basic_setup.html"
+---
+
+:nosearch:
+# 
+# Basic setup
+
+.. toctree::
+   :titlesonly:
+
+   basic_setup/configure_manufacturing_product
+   basic_setup/bill_configuration
+   basic_setup/one_step_manufacturing
+   basic_setup/two_step_manufacturing
+   basic_setup/three_step_manufacturing
+   basic_setup/mo_costs