odoo-forge-bundle 0.1.0

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/barcode/operations/transfers_scratch.md

@@ -0,0 +1,222 @@
+---
+title: "Create and process transfers with barcodes"
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/barcode/operations/transfers_scratch.html"
+---
+
+==========================================
+# Create and process transfers with barcodes
+
+The *Barcode* app can be used to process internal transfers for all types of products, including
+transfers for products tracked using lots or serial numbers. Transfers can be created from scratch
+in real time using an Odoo-compatible barcode scanner or the Odoo mobile app.
+
+For a list of Odoo-compatible barcode mobile scanners, and other hardware for the *Inventory* app,
+refer to the [Odoo Inventory • Hardware page ](https://www.odoo.com/app/inventory-hardware).
+
+# Enable Barcode app
+
+To use the *Barcode* app to process transfers, it must be installed by enabling the feature from the
+settings of the *Inventory* app.
+
+To do so, go to the :menuselection:`Inventory app --> Configuration --> Settings`. Then, scroll down
+to the :guilabel:`Barcode` section, and click the checkbox next to the :guilabel:`Barcode Scanner`
+feature.
+
+Once the checkbox is ticked, click :guilabel:`Save` at the top of the page to save changes.
+
+When the page has refreshed, new options are displayed under the :guilabel:`Barcode Scanner`
+feature: :guilabel:`Barcode Nomenclature` (with a corresponding drop-down menu), where either
+:guilabel:`Default Nomenclature` or :guilabel:`Default GS1 Nomenclature` can be selected. The
+nomenclature selected changes how scanners interpret barcodes in Odoo.
+
+There is also a :guilabel:`Configure Product Barcodes` internal link arrow, and a set of
+:guilabel:`Print` buttons for printing barcode commands and a barcode demo sheet.
+
+.. image:: transfers_scratch/transfers-scratch-enabled-barcode-setting.png
+   :align: center
+   :alt: Enabled Barcode feature in Inventory app settings.
+
+For more on setting up and configuring the :guilabel:`Barcode` app, refer to the :doc:`Set up your
+barcode scanner <../setup/hardware>` and :doc:`Activate the Barcodes in Odoo <../setup/software>`
+documentation pages.
+
+# Scan barcodes for internal transfers
+
+To create and process internal transfers for products in a warehouse, the :guilabel:`Storage
+Locations` and :guilabel:`Multi-Step Routes` features **must** be enabled.
+
+To do so, go to the :menuselection:`Inventory app --> Configuration --> Settings`. Then, scroll down
+to the :guilabel:`Warehouse` section, and click the checkboxes next to :guilabel:`Storage Locations`
+and :guilabel:`Multi-Step Routes`.
+
+Then, click :guilabel:`Save` at the top of the page to save changes.
+
+## Create an internal transfer
+
+To process existing internal transfers, there first needs to be an internal transfer created, and an
+operation to process.
+
+To create an internal transfer, navigate to the :menuselection:`Inventory app`. From the
+:guilabel:`Inventory Overview` dashboard, locate the :guilabel:`Internal Transfers` card, and click
+on the :guilabel:`0 To Process` button.
+
+Then, click :guilabel:`Create` in the top left of the resulting page. This navigates to a new
+:guilabel:`Internal Transfer` form.
+
+On this blank form, the :guilabel:`Operation Type` is automatically listed as :guilabel:`Internal
+Transfers`. Under that field, the :guilabel:`Source Location` and :guilabel:`Destination Location`
+are set as :guilabel:`WH/Stock` by default, but can be changed to whichever locations the products
+are being moved from, and moved to.
+
+.. image:: transfers_scratch/transfers-scratch-internal-transfer-form.png
+   :align: center
+   :alt: Blank internal transfer form with source location and destination location.
+
+Once the desired locations have been selected, products can be added to the transfer. On the
+:guilabel:`Product` line under the :guilabel:`Products` tab, click :guilabel:`Add a product`, and
+select the desired product(s) to add to the transfer.
+
+Once ready, click :guilabel:`Save` at the top of the form to save the new internal transfer. Once
+saved, click the :guilabel:`Detailed Operations` icon (four lines, at the far right of the
+:guilabel:`Product` line) to open the :guilabel:`Detailed Operations` pop-up window.
+
+.. image:: transfers_scratch/transfers-scratch-detailed-operations-popup.png
+   :align: center
+   :alt: Internal transfer detailed operations pop-up window.
+
+From the pop-up, click :guilabel:`Add a line`.
+
+Then, in the :guilabel:`To` column, change the location from :guilabel:`WH/Stock` to a different
+location, where the products should be moved.
+
+Next, in the :guilabel:`Done` column, change the quantity to the desired quantity to transfer. Once
+ready, click :guilabel:`Confirm` to close out the pop-up window.
+
+## Scan barcodes for internal transfer
+
+To process and scan barcodes for internal transfers, navigate to the :menuselection:`Barcode app`.
+
+Once inside the :guilabel:`Barcode app`, a :guilabel:`Barcode Scanning` screen displaying different
+options is presented.
+
+To process internal transfers, click on the :guilabel:`Operations` button at the bottom of the
+screen. This navigates to an :menuselection:`Operations` overview page.
+
+.. image:: transfers_scratch/transfers-scratch-barcode-app.png
+   :align: center
+   :alt: Barcode app start screen with scanner.
+
+From this page, locate the :guilabel:`Internal Transfers` card, and click the :guilabel:`# To
+Process` button to view all outstanding internal transfers. Then, select the desired operation to
+process. This navigates to the barcode transfer screen.
+
+> **note**:
+>    When using the *Barcode* app without the *Inventory* app (**only** if using a barcode scanner or
+   the Odoo mobile app), the barcodes for each transfer of a corresponding operation type can be
+   scanned to be processed easily.
+
+   Once scanned, the products that are part of an existing transfer can be scanned, and new products
+   can be added to the transfer, as well. Once all products have been scanned, validate the transfer
+   to proceed with the stock moves.
+
+From this screen, an overview of all products to process within that specific internal transfer
+(**WH/INT/000XX**) is shown. At the bottom of the screen, there are options to :guilabel:`Add
+Product` or :guilabel:`Validate`, depending on if products need to be added to the operation, or if
+the whole operation should be validated at once.
+
+.. image:: transfers_scratch/transfers-scratch-receipts-overview.png
+   :align: center
+   :alt: Overview of receipts in transfer to scan.
+
+Then, scan the barcode of the product to process the internal transfer.
+
+Or, to process and scan each product individually, choose a specific product line. The
+:guilabel:`+ 1` button can be clicked to add additional quantity of that product to the transfer, or
+the :guilabel:`pencil icon` can be clicked to open a new screen to edit that product line.
+
+In the product's pop-up window, the product and the units to process is displayed with a number pad.
+Under the product name, the :guilabel:`Quantity` line can be edited. Change the number in the line
+to the quantity listed to be transferred on the internal transfer form.
+
+.. example::
+   In the internal transfer operation `WH/INT/000XX`, `50 Units` of the `Transfer Product` is
+   moved from `WH/Stock` to `WH/Stock/Shelf 1`. `[TRANSFER_PROD]` is the :guilabel:`Internal
+   Reference` set on the product form. Scan the barcode of the `Transfer Product` to receive one
+   unit. Afterwards, click the :guilabel:`pencil icon` to manually enter the transferred quantities.
+
+   .. image:: transfers_scratch/transfers-scratch-product-line-editor.png
+      :align: center
+      :alt: Product line editor for individual transfer in Barcode app.
+
+Additionally, the :guilabel:`+1` and :guilabel:`-1` buttons can be clicked to add or subtract
+quantity of the product, and the number keys can be used to add quantity, as well.
+
+Below the number keys are the two :guilabel:`location` lines, which read whichever locations were
+previously specified on the internal transfer form, in this case `WH/Stock` and `WH/Stock/Shelf 1`.
+Click these lines to reveal a drop-down menu of additional locations to choose from.
+
+Once ready, click :guilabel:`Confirm` to confirm the changes made to the product line.
+
+Then, from the overview page with all products to process within that transfer (**WH/INT/000XX**),
+click :guilabel:`Validate`. The receipt has now been processed, and the *Barcode* app can be closed
+out.
+
+> **tip**:
+>    The *Barcode* app can also be used to scan products in internal transfers containing unique lot
+   numbers and serial numbers.
+
+   From the barcode transfer screen, scan the barcode of a lot or serial number, and Odoo
+   automatically increases the quantity of the product to the quantity recorded in the database. If
+   the same lot or serial number is shared between different products, scan the product barcode
+   first, then the barcode of the lot/serial number.
+
+.. seealso::
+   :ref:`Connect to the Barcode Lookup database <barcode/setup/barcodelookup>` to quickly create new
+   products by scanning their barcodes during internal transfers.
+
+# Create a transfer from scratch
+
+In addition to processing and scanning barcodes for existing, previously-created internal transfers,
+the *Barcode* app can also be used to create transfers from scratch, simply by scanning a printed
+operation type barcode.
+
+.. admonition:: Did you know?
+
+   Odoo's *Barcode* application provides demo data with barcodes to explore the features of the app.
+   These can be used for testing purposes, and can be printed from the home screen of the app. To
+   access this demo data, navigate to the :menuselection:`Barcode app` and click :guilabel:`stock
+   barcodes sheet` (bolded and highlighted in blue) in the information pop-up above the scanner.
+
+   .. image:: transfers_scratch/transfers-scratch-demo-data.png
+      :align: center
+      :alt: Demo data prompt pop-up on Barcode app main screen.
+
+To do this, first navigate to the :menuselection:`Barcode app`. Once inside the *Barcode* app, a
+:guilabel:`Barcode Scanning` screen displaying different options is presented.
+
+From this screen, when using a USB or bluetooth barcode scanner, directly scan the product barcode.
+
+When using a smartphone as the barcode scanner, click the :guilabel:`Tap to Scan` button (next to
+the camera icon, at the center of the screen). This opens a :guilabel:`Barcode Scanner` pop-up
+screen that enables the camera of the device being used.
+
+Face the camera toward the printed operation type barcode to scan it. Doing so processes the
+barcode, and navigates to a barcode transfer screen.
+
+From this screen, an overview of all products to process within that specific internal transfer
+(**WH/INT/000XX**) is shown. Since this is a new transfer created from scratch, however, there
+should not be any products listed on the page.
+
+To add products, scan the product barcode. If the barcode is not available, manually enter the
+product into the system by clicking the :guilabel:`Add Product` button at the bottom of the screen,
+and add the products and product quantities that should be transferred.
+
+Once ready, click :guilabel:`Confirm` to confirm the changes made to the product line.
+
+.. image:: transfers_scratch/transfers-scratch-blank-product-editor.png
+   :align: center
+   :alt: Blank product editor in scratch internal transfer.
+
+Then, from the overview page with all products to process within that transfer (**WH/INT/000XX**),
+click :guilabel:`Validate`. The internal transfer has now been processed, and the *Barcode* app can
+be closed out.

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/barcode/operations.md

@@ -0,0 +1,20 @@
+---
+title: ""
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/barcode/operations.html"
+---
+
+:nosearch:
+# 
+# Daily operations
+
+.. toctree::
+   :titlesonly:
+   :glob:
+
+   operations/adjustments
+   operations/receipts_deliveries
+   operations/process_transfers
+   operations/transfers_scratch
+   operations/barcode_nomenclature
+   operations/gs1_nomenclature
+   operations/gs1_usage

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/barcode/setup/device_troubleshooting.md

@@ -0,0 +1,206 @@
+---
+title: "Barcode device troubleshooting"
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/barcode/setup/device_troubleshooting.html"
+---
+
+==============================
+# Barcode device troubleshooting
+
+Odoo *Barcode* supports three main types of barcode scanners: USB scanners, bluetooth scanners, and
+mobile computer scanners. While configuring each type of scanner, common issues may arise, in which
+the scanners do not work as intended, and Odoo returns errors to the device.
+
+Read the sections below to identify general and unique device issues, related to specific, popular
+types of scanners.
+
+# General issues
+
+Refer to the following sections below for common issues involving popular barcode scanner devices.
+
+For issues related to specific devices, refer to the :ref:`Android scanners
+<barcode/setup/android-scanners>` section for mobile computer scanners, or to the :ref:`Screenless
+scanners <barcode/setup/screenless-scanners>` section for USB and bluetooth scanners.
+
+## Barcode cannot be read
+
+One common issue encountered when using barcode scanners is an error resulting from barcodes that
+cannot be read.
+
+This can occur due to any of the following reasons:
+
+- The barcode is damaged.
+- The device cannot read the required barcode type (some scanners can only read 2D barcodes).
+- The barcode being scanned is on a screen. Some scanners don't support this, and the barcodes
+  **must** be printed out to be scanned. This is most common with 1D barcodes.
+- The device has no battery, or is broken. To rule this out, follow the troubleshooting instructions
+  in the following sections.
+
+## Odoo returns barcode error
+
+All types of barcode scanners have their own device "language", which affects how they output
+barcode data to Odoo's *Barcode* app. Sometimes, this can cause Odoo *Barcode* to return a barcode
+error after scanning. This could be due to any of the following reasons:
+
+- The computer is configured with a different keyboard layout than the barcode scanner. To rule this
+  out, ensure that the device is configured with the same keyboard layout.
+
+  For example, if the computer is configured to use an FR-BE keyboard, configure the scanner to send
+  FR-BE keystrokes. The same logic applies if using a tablet instead of a computer.
+
+  For more information on configuring keystrokes, refer to the :doc:`Barcode scanner setup
+  <hardware>` documentation.
+- For mobile computer scanners (such as Zebra devices, for example), the scanner might interpret the
+  barcode differently than intended. To rule this out, scan a test barcode to see how the scanner
+  interprets the barcode.
+
+.. _barcode/setup/android-scanners:
+
+# Android scanners
+
+The most recent barcode scanner models using Android and Google Chrome should work with Odoo.
+However, due to the variety of models and configurations, it is recommended to first test a
+scanner's compatibility with Odoo.
+
+The Zebra product line is recommended; specifically, the **Zebra TC21 (WiFi-only)**, and **Zebra
+TC26 (WiFi/cellular)**.
+
+.. seealso::
+   [Odoo Inventory & Barcode compatible hardware ](https://www.odoo.com/app/inventory-hardware)
+
+## Barcode app does not give feedback
+
+By default, Android barcode scanners pre-process the barcode, then send a full text. Since Odoo
+*Barcode* does not read this type of output, settings for each type of scanner **must** be
+configured correctly.
+
+Odoo *Barcode* expects that the scanner works like an analogue keyboard, and so, only detects *key
+events*. Refer to the following sections for configuration settings for the most popular devices.
+
+## Zebra TC21/TC26
+
+When using Zebra scanners, ensure the following keystroke configurations are set to prevent errors.
+
+Begin on the Zebra scanner's home screen, and select the :guilabel:`DataWedge` app (the app is
+represented by a :guilabel:`(light blue barcode)` icon).
+
+On the :guilabel:`DataWedge Profiles` page, select the profile option to access the Zebra scanner's
+settings.
+
+Once the profile is selected, scroll down to the :guilabel:`Keyboard Output` option, and ensure the
+:guilabel:`Enable/disable keystroke output` option is :guilabel:`Enabled`.
+
+.. image:: device_troubleshooting/device-troubleshooting-zebra-settings.png
+   :align: center
+   :alt: Show keystroke option in the Zebra scanner's DataWedge app.
+
+Once that option is enabled, go back to the :guilabel:`Profile` options page, and go to the
+:guilabel:`Keystroke output` section. Then, open the :guilabel:`Key event options` submenu. Under
+:guilabel:`Characters`, ensure the :guilabel:`Send Characters as Events` option is checked.
+
+> **important**:
+>    The :guilabel:`Send Characters as Events` option **must** be checked on the Zebra scanner, or
+   Odoo **cannot** recognize the barcodes that are scanned.
+
+Once the above steps have been taken, perform a test scan to ensure the Zebra scanner is working as
+intended.
+
+## MUNBYN Android devices
+
+When using MUNBYN Android scanners, ensure the following configurations are set to prevent errors.
+
+From the device's home screen, click :menuselection:`AppSettings`. On the resulting page, locate the
+:guilabel:`Process mode` section, and select :guilabel:`Keyboard input`.
+
+.. image:: device_troubleshooting/device-troubleshooting-munbyn-process-mode.png
+   :align: center
+   :alt: Process mode section on MUNBYN scanner's AppSettings page.
+
+> **tip**:
+>    The selected *Process mode* controls how data is processed after barcode data has been read out.
+
+   *Keyboard input* enters read-out data at the position of the cursor, the same as input data on an
+   analogue keyboard would.
+
+Once the above steps have been taken, perform a test scan to ensure the MUNBYN Android scanner is
+working as intended.
+
+.. admonition:: Why is there no data output in the app after a successful scan?
+
+   When scanning a barcode, the scanner might beep, indicating a successful scan, but there is no
+   data output in the app.
+
+   To fix this issue, adjust the output method to *keyboard analogue* in the *Scanner* app on the
+   device.
+
+   From the device's home screen, click :menuselection:`Scanner App --> Settings`. From the
+   :guilabel:`Settings` page, click :guilabel:`Output Mode`. The resulting pop-up window presents
+   the different output options available to users. Select :guilabel:`Keyboard Mode`, then click
+   :guilabel:`OK`.
+
+   .. image:: device_troubleshooting/device-troubleshooting-output-mode-popup.png
+      :align: center
+      :alt: Output mode pop-up window on MUNBYN scanner.
+
+   Go back to the app that needs to be scanned, and click on the input dialog box first before
+   scanning. Finally, perform a test scan to ensure the MUNBYN Android scanner is working as
+   intended.
+
+## Datalogic Android devices
+
+When using Datalogic Android scanners, ensure the following configurations are set to prevent
+errors.
+
+To view and configure all settings for the scanner, use the *Settings* app on the Datalogic Android
+device. From the applications menu, select :menuselection:`Settings --> System --> Scanner
+Settings`.
+
+From the resulting list of settings, select :guilabel:`Wedge`. From this menu, under the
+:guilabel:`Keyboard wedge` section, ensure that the :guilabel:`Enable keyboard wedge` feature is
+activated.
+
+Then, also under the :guilabel:`Keyboard wedge` section, locate the :guilabel:`Keyboard wedge input
+mode` option. By default, the input mode is set to :guilabel:`Text injection`.
+
+.. image:: device_troubleshooting/device-troubleshooting-wedge-menu.png
+   :align: center
+   :alt: Wedge configuration menu on Datalogic scanner.
+
+Click :guilabel:`Keyboard wedge input mode`, and change the setting to :guilabel:`Key pressure`.
+This ensures that scanned barcodes are translated into keyboard strokes, instead of being injected
+into the text area.
+
+.. image:: device_troubleshooting/device-troubleshooting-keyboard-wedge-input.png
+   :align: center
+   :alt: Keyboard wedge input mode selection on Datalogic scanner.
+
+Once all those steps have been taken, perform a test scan to ensure the Datalogic Android scanner is
+working as intended.
+
+.. _barcode/setup/screenless-scanners:
+
+# Screenless scanners
+
+Screenless scanners are barcode scanning devices that have no screens. These include USB scanners
+and bluetooth scanners.
+
+> **important**:
+>    Odoo supports most USB and Bluetooth barcode scanners, as they all emulate a keyboard. However,
+   to verify that a scanner is compatible with a specific keyboard layout (or can be configured to
+   do so), refer to Odoo's [Inventory & Barcode compatible hardware
+   ](https://www.odoo.com/app/inventory-hardware) documentation.
+
+## NETUM devices
+
+By default, the NETUM barcode scanner's user manual only shows the French keyboard configuration. To
+use the Belgian keyboard, scan the code below:
+
+.. image:: device_troubleshooting/device-troubleshooting-belgium-fr-key.png
+   :align: center
+   :alt: Belgian FR key barcode.
+
+Once that code has been scanned, ensure the NETUM scanner has the correct keyboard configuration,
+and is working as intended.
+
+.. seealso::
+   - :doc:`../setup/hardware`
+   - :doc:`../setup/software`

package/payload/skills/odoo18-docs/references/docs/applications/inventory_and_mrp/barcode/setup/hardware.md

@@ -0,0 +1,162 @@
+---
+title: "Barcode scanner setup"
+source_url: "https://docs.odoo.sbggai.top/applications/inventory_and_mrp/barcode/setup/hardware.html"
+---
+
+=====================
+# Barcode scanner setup
+
+.. _barcode/setup/hardware:
+
+Follow this guide to choose and set up a barcode scanner compatible with Odoo's *Inventory* and
+*Barcode* apps.
+
+.. figure:: hardware/barcode-scanner.png
+   :align: center
+   :alt: An image of an example barcode scanner.
+
+# Scanner types
+
+Before setting up a barcode scanner, it is important to determine which type of scanner best meets
+the needs of the business. There are three main types of scanners that can be used with Odoo, each
+with their own benefits and use cases:
+
+- **USB scanners** are connected to a computer, and are suitable for businesses that scan products
+  at a fixed location, like at the checkout line in a grocery store.
+- **Bluetooth scanners** pair with a smartphone or tablet, making them both a cost-effective and
+  portable barcode scanner option. In this scenario, Odoo is installed on the smartphone, allowing
+  warehouse operators to handle operations, and check stock, directly through their mobile devices.
+- **Mobile computer scanners** are mobile devices with a built-in barcode scanner.
+
+  > **important**:
+>      If using a USB scanner, ensure the scanner is compatible with the keyboard layout of the
+     computer.
+
+     If using a mobile computer scanner, ensure the device can run the Odoo mobile app properly.
+     Recent models that use Android OS with the Google Chrome browser, or Windows OS with Microsoft
+     Edge, should work. However, testing is crucial due to the variety of available models and
+     configurations.
+
+.. seealso::
+   [Odoo Inventory & Barcode • Compatible Hardware ](https://www.odoo.com/app/inventory-hardware)
+
+# Configuration
+
+When setting up the barcode scanner, make sure the following configurations are correct so the
+scanner can properly interpret barcodes with Odoo.
+
+## Keyboard layout
+
+When using a USB barcode scanner, match its keyboard layout with the operating system's layout for
+proper interpretation of characters. Generally, the scanning mode should be set to accept a USB
+keyboard (HID), with the language set based on the keyboard that is in use.
+
+To configure the keyboard layout for a **Zebra** scanner, scan the keyboard wedge barcode for the
+desired language in the scanner's user manual.
+
+.. figure:: hardware/keyboard-barcode.png
+   :align: center
+   :alt: Example of a user manual for keyboard layout.
+
+   Examples of keyboard language settings in the Zebra scanner user manual.
+
+## Automatic carriage return
+
+Odoo has a default 100-millisecond delay between scans to prevent accidental double scanning. To
+synchronize with the barcode scanner, set it to include a *carriage return* (:dfn:`character like
+the "Enter" key on a keyboard`) after each scan. Odoo interprets the carriage return as the end of
+the barcode input; so Odoo accepts the scan, and waits for the next one.
+
+Typically, on the scanner, a carriage return is included by default. Ensure it is set by scanning a
+specific barcode in the user manual, like `CR suffix ON` or `Apply Enter for suffix`.
+
+# Zebra scanner
+
+When using Zebra scanners, ensure the following keystroke configurations are set to prevent errors.
+
+Begin on the Zebra scanner's home screen, and select the :guilabel:`DataWedge` app (the app is
+represented by a :guilabel:`(light blue barcode)` icon).
+
+On the :guilabel:`DataWedge Profiles` page, select the profile option to access the Zebra scanner's
+settings.
+
+> **warning**:
+>    It is **not** suggested to use the "DWDemo" profile, as it does not work properly in every
+   circumstance.
+
+   Instead, it is recommended to create a new, personal profile. Once a new profile is created, add
+   the *Odoo Mobile* app and *Google Chrome* app in the :guilabel:`Associated Apps` on the scanner's
+   home screen.
+
+Once the profile is selected, scroll down to the :guilabel:`Keyboard Output` option, and ensure the
+:guilabel:`Enable/disable keystroke output` option is :guilabel:`Enabled`.
+
+.. image:: hardware/enable-keystroke.png
+   :align: center
+   :alt: Show keystroke option in the Zebra scanner's DataWedge app.
+
+Once that option is enabled, go back to the :guilabel:`Profile` options page, and go to the
+:guilabel:`Keystroke output` section. Then, open the :guilabel:`Key event options` submenu. Under
+:guilabel:`Characters`, ensure the :guilabel:`Send Characters as Events` option is checked.
+
+> **important**:
+>    The :guilabel:`Send Characters as Events` option **must** be checked on the Zebra scanner, or
+   Odoo **cannot** recognize the barcodes that are scanned.
+
+Once all those steps have been taken, perform a test scan to ensure the Zebra scanner is working
+properly, as intended.
+
+# Honeywell mobile computer scanner
+
+When using Honeywell scanners, follow the instructions below to ensure barcodes can be scanned in
+Odoo.
+
+Begin on the Honeywell scanner's home screen, and select :guilabel:`Settings`, represented by a
+:guilabel:`⚙️ (gear)` icon. Then, click :guilabel:`Honeywell Settings`, followed by
+:guilabel:`Scanning`.
+
+From here, click :guilabel:`Internal Scanner`, followed by :guilabel:`Default Profile`. From the
+resulting list of options, select :guilabel:`Data Processing Settings`.
+
+The :guilabel:`Data Processing Settings` specify how barcode data is processed by the computer.
+Locate the :guilabel:`Wedge Method` setting. By default, this is set to :guilabel:`Standard`.
+
+.. image:: hardware/hardware-honeywell-settings.png
+   :align: center
+   :alt: Data processing settings options for Honeywell scanner.
+
+Change the :guilabel:`Wedge Method` setting to :guilabel:`Keyboard`.
+
+After completing the steps, conduct a test scan to verify the Honeywell scanner is working as
+intended.
+
+# Cipherlab mobile computer scanner
+
+When using Cipherlab scanners, follow the instructions below to ensure barcodes can be scanned in
+Odoo.
+
+Begin on the Cipherlab scanner's home screen, and navigate to the :menuselection:`App Drawer (All
+Applications)`. Then, click the :guilabel:`ReaderConfig` app, represented by an orange
+:guilabel:`⚙️ (gear)` icon over a blue :guilabel:`(barcode)` icon.
+
+Next, select the :guilabel:`Default Profile`, or create a new profile, if needed.
+
+Under the :guilabel:`General Settings`, click :guilabel:`Data Output`, followed by
+:guilabel:`Keyboard Emulation`.
+
+.. image:: hardware/hardware-cipherlab-settings.png
+   :align: center
+   :alt: Cipherlab scanner data output setting page.
+
+By default, the :guilabel:`Input Method`, under :guilabel:`Keyboard Emulation`, is set to
+:guilabel:`Default Mode`. Change this setting to :guilabel:`KeyEvent`.
+
+.. image:: hardware/hardware-cipherlab-emulation.png
+   :align: center
+   :alt: Cipherlab scanner keyboard emulation settings.
+
+After completing the steps, conduct a test scan to verify the Cipherlab scanner is working as
+intended.
+
+.. seealso::
+   :doc:`../setup/software`