ruby-bullet 0.0.2-x86-mingw32

data/deps/include/bullet/BulletMultiThreaded/GpuSoftBodySolvers/cmake_install.cmake

@@ -0,0 +1,35 @@
+# Install script for directory: C:/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531/src/BulletMultiThreaded/GpuSoftBodySolvers
+
+# Set the install prefix
+IF(NOT DEFINED CMAKE_INSTALL_PREFIX)
+  SET(CMAKE_INSTALL_PREFIX "..")
+ENDIF(NOT DEFINED CMAKE_INSTALL_PREFIX)
+STRING(REGEX REPLACE "/$" "" CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}")
+
+# Set the install configuration name.
+IF(NOT DEFINED CMAKE_INSTALL_CONFIG_NAME)
+  IF(BUILD_TYPE)
+    STRING(REGEX REPLACE "^[^A-Za-z0-9_]+" ""
+           CMAKE_INSTALL_CONFIG_NAME "${BUILD_TYPE}")
+  ELSE(BUILD_TYPE)
+    SET(CMAKE_INSTALL_CONFIG_NAME "Release")
+  ENDIF(BUILD_TYPE)
+  MESSAGE(STATUS "Install configuration: \"${CMAKE_INSTALL_CONFIG_NAME}\"")
+ENDIF(NOT DEFINED CMAKE_INSTALL_CONFIG_NAME)
+
+# Set the component getting installed.
+IF(NOT CMAKE_INSTALL_COMPONENT)
+  IF(COMPONENT)
+    MESSAGE(STATUS "Install component: \"${COMPONENT}\"")
+    SET(CMAKE_INSTALL_COMPONENT "${COMPONENT}")
+  ELSE(COMPONENT)
+    SET(CMAKE_INSTALL_COMPONENT)
+  ENDIF(COMPONENT)
+ENDIF(NOT CMAKE_INSTALL_COMPONENT)
+
+IF(NOT CMAKE_INSTALL_LOCAL_ONLY)
+  # Include the install script for each subdirectory.
+  INCLUDE("C:/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531/src/BulletMultiThreaded/GpuSoftBodySolvers/OpenCL/cmake_install.cmake")
+
+ENDIF(NOT CMAKE_INSTALL_LOCAL_ONLY)
+

data/deps/include/bullet/BulletMultiThreaded/HeapManager.h

@@ -0,0 +1,117 @@
+/*
+   Copyright (C) 2009 Sony Computer Entertainment Inc.
+   All rights reserved.
+
+This software is provided 'as-is', without any express or implied warranty.
+In no event will the authors be held liable for any damages arising from the use of this software.
+Permission is granted to anyone to use this software for any purpose, 
+including commercial applications, and to alter it and redistribute it freely, 
+subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
+2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+
+*/
+
+#ifndef BT_HEAP_MANAGER_H__
+#define BT_HEAP_MANAGER_H__
+
+#ifdef __SPU__
+	#define HEAP_STACK_SIZE 32
+#else
+	#define HEAP_STACK_SIZE 64
+#endif
+
+#define MIN_ALLOC_SIZE 16
+
+
+class HeapManager
+{
+private:
+	ATTRIBUTE_ALIGNED16(unsigned char *mHeap);
+	ATTRIBUTE_ALIGNED16(unsigned int mHeapBytes);
+	ATTRIBUTE_ALIGNED16(unsigned char *mPoolStack[HEAP_STACK_SIZE]);
+	ATTRIBUTE_ALIGNED16(unsigned int mCurStack);
+	
+public:
+	enum {ALIGN16,ALIGN128};
+
+	HeapManager(unsigned char *buf,int bytes)
+	{
+		mHeap = buf;
+		mHeapBytes = bytes;
+		clear();
+	}
+	
+	~HeapManager()
+	{
+	}
+	
+	int getAllocated()
+	{
+		return (int)(mPoolStack[mCurStack]-mHeap);
+	}
+	
+	int getRest()
+	{
+		return mHeapBytes-getAllocated();
+	}
+
+	void *allocate(size_t bytes,int alignment = ALIGN16)
+	{
+		if(bytes <= 0) bytes = MIN_ALLOC_SIZE;
+		btAssert(mCurStack < (HEAP_STACK_SIZE-1));
+
+		
+#if defined(_WIN64) || defined(__LP64__) || defined(__x86_64__)
+		unsigned long long p = (unsigned long long )mPoolStack[mCurStack];
+		if(alignment == ALIGN128) {
+			p = ((p+127) & 0xffffffffffffff80);
+			bytes = (bytes+127) & 0xffffffffffffff80;
+		}
+		else {
+			bytes = (bytes+15) & 0xfffffffffffffff0;
+		}
+
+		btAssert(bytes <=(mHeapBytes-(p-(unsigned long long )mHeap)) );
+		
+#else
+		unsigned long p = (unsigned long )mPoolStack[mCurStack];
+		if(alignment == ALIGN128) {
+			p = ((p+127) & 0xffffff80);
+			bytes = (bytes+127) & 0xffffff80;
+		}
+		else {
+			bytes = (bytes+15) & 0xfffffff0;
+		}
+		btAssert(bytes <=(mHeapBytes-(p-(unsigned long)mHeap)) );
+#endif
+		unsigned char * bla = (unsigned char *)(p + bytes);
+		mPoolStack[++mCurStack] = bla;
+		return (void*)p;
+	}
+
+	void deallocate(void *p)
+	{
+		(void) p;
+		mCurStack--;
+	}
+	
+	void clear()
+	{
+		mPoolStack[0] = mHeap;
+		mCurStack = 0;
+	}
+
+//	void printStack()
+//	{
+//		for(unsigned int i=0;i<=mCurStack;i++) {
+//			PRINTF("memStack %2d 0x%x\n",i,(uint32_t)mPoolStack[i]);
+//		}
+//	}
+
+};
+
+#endif //BT_HEAP_MANAGER_H__
+

data/deps/include/bullet/BulletMultiThreaded/Makefile

@@ -0,0 +1,461 @@
+# CMAKE generated file: DO NOT EDIT!
+# Generated by "MSYS Makefiles" Generator, CMake Version 2.8
+
+# Default target executed when no arguments are given to make.
+default_target: all
+.PHONY : default_target
+
+#=============================================================================
+# Special targets provided by cmake.
+
+# Disable implicit rules so canonical targets will work.
+.SUFFIXES:
+
+# Remove some rules from gmake that .SUFFIXES does not remove.
+SUFFIXES =
+
+.SUFFIXES: .hpux_make_needs_suffix_list
+
+# Suppress display of executed commands.
+$(VERBOSE).SILENT:
+
+# A target that is always out of date.
+cmake_force:
+.PHONY : cmake_force
+
+#=============================================================================
+# Set environment variables for the build.
+
+# The shell in which to execute make rules.
+SHELL = /bin/sh
+
+# The CMake executable.
+CMAKE_COMMAND = "/c/Program Files (x86)/CMake 2.8/bin/cmake.exe"
+
+# The command to remove a file.
+RM = "/c/Program Files (x86)/CMake 2.8/bin/cmake.exe" -E remove -f
+
+# The program to use to edit the cache.
+CMAKE_EDIT_COMMAND = "/c/Program Files (x86)/CMake 2.8/bin/cmake-gui.exe"
+
+# The top-level source directory on which CMake was run.
+CMAKE_SOURCE_DIR = /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531
+
+# The top-level build directory on which CMake was run.
+CMAKE_BINARY_DIR = /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531
+
+#=============================================================================
+# Targets provided globally by CMake.
+
+# Special rule for the target edit_cache
+edit_cache:
+	@$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake cache editor..."
+	"/c/Program Files (x86)/CMake 2.8/bin/cmake-gui.exe" -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR)
+.PHONY : edit_cache
+
+# Special rule for the target edit_cache
+edit_cache/fast: edit_cache
+.PHONY : edit_cache/fast
+
+# Special rule for the target rebuild_cache
+rebuild_cache:
+	@$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..."
+	"/c/Program Files (x86)/CMake 2.8/bin/cmake.exe" -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR)
+.PHONY : rebuild_cache
+
+# Special rule for the target rebuild_cache
+rebuild_cache/fast: rebuild_cache
+.PHONY : rebuild_cache/fast
+
+# The main all target
+all: cmake_check_build_system
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(CMAKE_COMMAND) -E cmake_progress_start /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531/CMakeFiles /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531/src/BulletMultiThreaded/CMakeFiles/progress.marks
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f CMakeFiles/Makefile2 src/BulletMultiThreaded/all
+	$(CMAKE_COMMAND) -E cmake_progress_start /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531/CMakeFiles 0
+.PHONY : all
+
+# The main clean target
+clean:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f CMakeFiles/Makefile2 src/BulletMultiThreaded/clean
+.PHONY : clean
+
+# The main clean target
+clean/fast: clean
+.PHONY : clean/fast
+
+# Prepare targets for installation.
+preinstall: all
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f CMakeFiles/Makefile2 src/BulletMultiThreaded/preinstall
+.PHONY : preinstall
+
+# Prepare targets for installation.
+preinstall/fast:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f CMakeFiles/Makefile2 src/BulletMultiThreaded/preinstall
+.PHONY : preinstall/fast
+
+# clear depends
+depend:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1
+.PHONY : depend
+
+# Convenience name for target.
+src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/rule:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f CMakeFiles/Makefile2 src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/rule
+.PHONY : src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/rule
+
+# Convenience name for target.
+BulletMultiThreaded: src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/rule
+.PHONY : BulletMultiThreaded
+
+# fast build rule for target.
+BulletMultiThreaded/fast:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build
+.PHONY : BulletMultiThreaded/fast
+
+# target to build an object file
+PosixThreadSupport.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/PosixThreadSupport.obj
+.PHONY : PosixThreadSupport.obj
+
+# target to preprocess a source file
+PosixThreadSupport.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/PosixThreadSupport.i
+.PHONY : PosixThreadSupport.i
+
+# target to generate assembly for a file
+PosixThreadSupport.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/PosixThreadSupport.s
+.PHONY : PosixThreadSupport.s
+
+# target to build an object file
+SequentialThreadSupport.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SequentialThreadSupport.obj
+.PHONY : SequentialThreadSupport.obj
+
+# target to preprocess a source file
+SequentialThreadSupport.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SequentialThreadSupport.i
+.PHONY : SequentialThreadSupport.i
+
+# target to generate assembly for a file
+SequentialThreadSupport.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SequentialThreadSupport.s
+.PHONY : SequentialThreadSupport.s
+
+# target to build an object file
+SpuCollisionObjectWrapper.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuCollisionObjectWrapper.obj
+.PHONY : SpuCollisionObjectWrapper.obj
+
+# target to preprocess a source file
+SpuCollisionObjectWrapper.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuCollisionObjectWrapper.i
+.PHONY : SpuCollisionObjectWrapper.i
+
+# target to generate assembly for a file
+SpuCollisionObjectWrapper.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuCollisionObjectWrapper.s
+.PHONY : SpuCollisionObjectWrapper.s
+
+# target to build an object file
+SpuCollisionTaskProcess.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuCollisionTaskProcess.obj
+.PHONY : SpuCollisionTaskProcess.obj
+
+# target to preprocess a source file
+SpuCollisionTaskProcess.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuCollisionTaskProcess.i
+.PHONY : SpuCollisionTaskProcess.i
+
+# target to generate assembly for a file
+SpuCollisionTaskProcess.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuCollisionTaskProcess.s
+.PHONY : SpuCollisionTaskProcess.s
+
+# target to build an object file
+SpuContactManifoldCollisionAlgorithm.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuContactManifoldCollisionAlgorithm.obj
+.PHONY : SpuContactManifoldCollisionAlgorithm.obj
+
+# target to preprocess a source file
+SpuContactManifoldCollisionAlgorithm.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuContactManifoldCollisionAlgorithm.i
+.PHONY : SpuContactManifoldCollisionAlgorithm.i
+
+# target to generate assembly for a file
+SpuContactManifoldCollisionAlgorithm.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuContactManifoldCollisionAlgorithm.s
+.PHONY : SpuContactManifoldCollisionAlgorithm.s
+
+# target to build an object file
+SpuFakeDma.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuFakeDma.obj
+.PHONY : SpuFakeDma.obj
+
+# target to preprocess a source file
+SpuFakeDma.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuFakeDma.i
+.PHONY : SpuFakeDma.i
+
+# target to generate assembly for a file
+SpuFakeDma.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuFakeDma.s
+.PHONY : SpuFakeDma.s
+
+# target to build an object file
+SpuGatheringCollisionDispatcher.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuGatheringCollisionDispatcher.obj
+.PHONY : SpuGatheringCollisionDispatcher.obj
+
+# target to preprocess a source file
+SpuGatheringCollisionDispatcher.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuGatheringCollisionDispatcher.i
+.PHONY : SpuGatheringCollisionDispatcher.i
+
+# target to generate assembly for a file
+SpuGatheringCollisionDispatcher.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuGatheringCollisionDispatcher.s
+.PHONY : SpuGatheringCollisionDispatcher.s
+
+# target to build an object file
+SpuLibspe2Support.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuLibspe2Support.obj
+.PHONY : SpuLibspe2Support.obj
+
+# target to preprocess a source file
+SpuLibspe2Support.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuLibspe2Support.i
+.PHONY : SpuLibspe2Support.i
+
+# target to generate assembly for a file
+SpuLibspe2Support.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuLibspe2Support.s
+.PHONY : SpuLibspe2Support.s
+
+# target to build an object file
+SpuNarrowPhaseCollisionTask/SpuCollisionShapes.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuCollisionShapes.obj
+.PHONY : SpuNarrowPhaseCollisionTask/SpuCollisionShapes.obj
+
+# target to preprocess a source file
+SpuNarrowPhaseCollisionTask/SpuCollisionShapes.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuCollisionShapes.i
+.PHONY : SpuNarrowPhaseCollisionTask/SpuCollisionShapes.i
+
+# target to generate assembly for a file
+SpuNarrowPhaseCollisionTask/SpuCollisionShapes.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuCollisionShapes.s
+.PHONY : SpuNarrowPhaseCollisionTask/SpuCollisionShapes.s
+
+# target to build an object file
+SpuNarrowPhaseCollisionTask/SpuContactResult.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuContactResult.obj
+.PHONY : SpuNarrowPhaseCollisionTask/SpuContactResult.obj
+
+# target to preprocess a source file
+SpuNarrowPhaseCollisionTask/SpuContactResult.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuContactResult.i
+.PHONY : SpuNarrowPhaseCollisionTask/SpuContactResult.i
+
+# target to generate assembly for a file
+SpuNarrowPhaseCollisionTask/SpuContactResult.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuContactResult.s
+.PHONY : SpuNarrowPhaseCollisionTask/SpuContactResult.s
+
+# target to build an object file
+SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.obj
+.PHONY : SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.obj
+
+# target to preprocess a source file
+SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.i
+.PHONY : SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.i
+
+# target to generate assembly for a file
+SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.s
+.PHONY : SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.s
+
+# target to build an object file
+SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.obj
+.PHONY : SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.obj
+
+# target to preprocess a source file
+SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.i
+.PHONY : SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.i
+
+# target to generate assembly for a file
+SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.s
+.PHONY : SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.s
+
+# target to build an object file
+SpuNarrowPhaseCollisionTask/boxBoxDistance.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/boxBoxDistance.obj
+.PHONY : SpuNarrowPhaseCollisionTask/boxBoxDistance.obj
+
+# target to preprocess a source file
+SpuNarrowPhaseCollisionTask/boxBoxDistance.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/boxBoxDistance.i
+.PHONY : SpuNarrowPhaseCollisionTask/boxBoxDistance.i
+
+# target to generate assembly for a file
+SpuNarrowPhaseCollisionTask/boxBoxDistance.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuNarrowPhaseCollisionTask/boxBoxDistance.s
+.PHONY : SpuNarrowPhaseCollisionTask/boxBoxDistance.s
+
+# target to build an object file
+SpuSampleTaskProcess.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuSampleTaskProcess.obj
+.PHONY : SpuSampleTaskProcess.obj
+
+# target to preprocess a source file
+SpuSampleTaskProcess.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuSampleTaskProcess.i
+.PHONY : SpuSampleTaskProcess.i
+
+# target to generate assembly for a file
+SpuSampleTaskProcess.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/SpuSampleTaskProcess.s
+.PHONY : SpuSampleTaskProcess.s
+
+# target to build an object file
+Win32ThreadSupport.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/Win32ThreadSupport.obj
+.PHONY : Win32ThreadSupport.obj
+
+# target to preprocess a source file
+Win32ThreadSupport.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/Win32ThreadSupport.i
+.PHONY : Win32ThreadSupport.i
+
+# target to generate assembly for a file
+Win32ThreadSupport.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/Win32ThreadSupport.s
+.PHONY : Win32ThreadSupport.s
+
+# target to build an object file
+btGpu3DGridBroadphase.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btGpu3DGridBroadphase.obj
+.PHONY : btGpu3DGridBroadphase.obj
+
+# target to preprocess a source file
+btGpu3DGridBroadphase.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btGpu3DGridBroadphase.i
+.PHONY : btGpu3DGridBroadphase.i
+
+# target to generate assembly for a file
+btGpu3DGridBroadphase.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btGpu3DGridBroadphase.s
+.PHONY : btGpu3DGridBroadphase.s
+
+# target to build an object file
+btParallelConstraintSolver.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btParallelConstraintSolver.obj
+.PHONY : btParallelConstraintSolver.obj
+
+# target to preprocess a source file
+btParallelConstraintSolver.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btParallelConstraintSolver.i
+.PHONY : btParallelConstraintSolver.i
+
+# target to generate assembly for a file
+btParallelConstraintSolver.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btParallelConstraintSolver.s
+.PHONY : btParallelConstraintSolver.s
+
+# target to build an object file
+btThreadSupportInterface.obj:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btThreadSupportInterface.obj
+.PHONY : btThreadSupportInterface.obj
+
+# target to preprocess a source file
+btThreadSupportInterface.i:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btThreadSupportInterface.i
+.PHONY : btThreadSupportInterface.i
+
+# target to generate assembly for a file
+btThreadSupportInterface.s:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(MAKE) -f src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/build.make src/BulletMultiThreaded/CMakeFiles/BulletMultiThreaded.dir/btThreadSupportInterface.s
+.PHONY : btThreadSupportInterface.s
+
+# Help Target
+help:
+	@echo "The following are some of the valid targets for this Makefile:"
+	@echo "... all (the default if no target is provided)"
+	@echo "... clean"
+	@echo "... depend"
+	@echo "... BulletMultiThreaded"
+	@echo "... edit_cache"
+	@echo "... rebuild_cache"
+	@echo "... PosixThreadSupport.obj"
+	@echo "... PosixThreadSupport.i"
+	@echo "... PosixThreadSupport.s"
+	@echo "... SequentialThreadSupport.obj"
+	@echo "... SequentialThreadSupport.i"
+	@echo "... SequentialThreadSupport.s"
+	@echo "... SpuCollisionObjectWrapper.obj"
+	@echo "... SpuCollisionObjectWrapper.i"
+	@echo "... SpuCollisionObjectWrapper.s"
+	@echo "... SpuCollisionTaskProcess.obj"
+	@echo "... SpuCollisionTaskProcess.i"
+	@echo "... SpuCollisionTaskProcess.s"
+	@echo "... SpuContactManifoldCollisionAlgorithm.obj"
+	@echo "... SpuContactManifoldCollisionAlgorithm.i"
+	@echo "... SpuContactManifoldCollisionAlgorithm.s"
+	@echo "... SpuFakeDma.obj"
+	@echo "... SpuFakeDma.i"
+	@echo "... SpuFakeDma.s"
+	@echo "... SpuGatheringCollisionDispatcher.obj"
+	@echo "... SpuGatheringCollisionDispatcher.i"
+	@echo "... SpuGatheringCollisionDispatcher.s"
+	@echo "... SpuLibspe2Support.obj"
+	@echo "... SpuLibspe2Support.i"
+	@echo "... SpuLibspe2Support.s"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuCollisionShapes.obj"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuCollisionShapes.i"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuCollisionShapes.s"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuContactResult.obj"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuContactResult.i"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuContactResult.s"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.obj"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.i"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuGatheringCollisionTask.s"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.obj"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.i"
+	@echo "... SpuNarrowPhaseCollisionTask/SpuMinkowskiPenetrationDepthSolver.s"
+	@echo "... SpuNarrowPhaseCollisionTask/boxBoxDistance.obj"
+	@echo "... SpuNarrowPhaseCollisionTask/boxBoxDistance.i"
+	@echo "... SpuNarrowPhaseCollisionTask/boxBoxDistance.s"
+	@echo "... SpuSampleTaskProcess.obj"
+	@echo "... SpuSampleTaskProcess.i"
+	@echo "... SpuSampleTaskProcess.s"
+	@echo "... Win32ThreadSupport.obj"
+	@echo "... Win32ThreadSupport.i"
+	@echo "... Win32ThreadSupport.s"
+	@echo "... btGpu3DGridBroadphase.obj"
+	@echo "... btGpu3DGridBroadphase.i"
+	@echo "... btGpu3DGridBroadphase.s"
+	@echo "... btParallelConstraintSolver.obj"
+	@echo "... btParallelConstraintSolver.i"
+	@echo "... btParallelConstraintSolver.s"
+	@echo "... btThreadSupportInterface.obj"
+	@echo "... btThreadSupportInterface.i"
+	@echo "... btThreadSupportInterface.s"
+.PHONY : help
+
+
+
+#=============================================================================
+# Special targets to cleanup operation of make.
+
+# Special rule to run CMake to check the build system integrity.
+# No rule that depends on this can have commands that come from listfiles
+# because they might be regenerated.
+cmake_check_build_system:
+	cd /C/Users/abex/Documents/GitHub/ruby-bullet/deps/src/bullet-2.80-rev2531 && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0
+.PHONY : cmake_check_build_system
+