@antv/l7-layers 2.9.37-alpha.2 → 2.9.37-alpha.3

package/lib/line/shaders/dash/arc_dash_vert.glsl

@@ -0,0 +1,150 @@
+
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+attribute vec4 a_Instance;
+attribute float a_Size;
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+uniform float segmentNumber;
+varying vec4 v_color;
+
+
+uniform vec4 u_dash_array: [10.0, 5., 0, 0];
+uniform float u_lineDir: 1.0;
+varying vec4 v_dash_array;
+
+uniform float u_thetaOffset: 0.314;
+
+uniform float u_opacity: 1.0;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+#pragma include "styleMappingCalThetaOffset"
+
+#pragma include "projection"
+#pragma include "project"
+#pragma include "picking"
+
+float bezier3(vec3 arr, float t) {
+  float ut = 1. - t;
+  return (arr.x * ut + arr.y * t) * ut + (arr.y * ut + arr.z * t) * t;
+}
+vec2 midPoint(vec2 source, vec2 target, float arcThetaOffset) {
+  vec2 center = target - source;
+  float r = length(center);
+  float theta = atan(center.y, center.x);
+  float thetaOffset = arcThetaOffset;
+  float r2 = r / 2.0 / cos(thetaOffset);
+  float theta2 = theta + thetaOffset;
+  vec2 mid = vec2(r2*cos(theta2) + source.x, r2*sin(theta2) + source.y);
+  if(u_lineDir == 1.0) { // 正向
+    return mid;
+  } else { // 逆向
+    // (mid + vmin)/2 = (s + t)/2
+    vec2 vmid = source + target - mid;
+    return vmid;
+  }
+  // return mid;
+}
+float getSegmentRatio(float index) {
+  // dash: index / (segmentNumber - 1.);
+  // normal: smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
+  return index / (segmentNumber - 1.);
+}
+vec2 interpolate (vec2 source, vec2 target, float t, float arcThetaOffset) {
+  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
+  vec2 mid = midPoint(source, target, arcThetaOffset);
+  vec3 x = vec3(source.x, mid.x, target.x);
+  vec3 y = vec3(source.y, mid.y, target.y);
+  return vec2(bezier3(x ,t), bezier3(y,t));
+}
+vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
+  // normalized direction of the line
+  vec2 dir_screenspace = normalize(line_clipspace);
+  // rotate by 90 degrees
+   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
+  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
+  return offset;
+}
+vec2 getNormal(vec2 line_clipspace, float offset_direction) {
+  // normalized direction of the line
+  vec2 dir_screenspace = normalize(line_clipspace);
+  // rotate by 90 degrees
+   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
+   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
+}
+
+void main() {
+  v_color = a_Color;
+
+  // cal style mapping - 数据纹理映射部分的计算
+  styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0  // dataset 数据集
+  );
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke -> thetaOffset... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+
+  vec2 thetaOffsetAndOffset = calThetaOffsetAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][1] = thetaOffsetAndOffset.r;
+  textureOffset = thetaOffsetAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  
+  vec2 source = a_Instance.rg;  // 起始点
+  vec2 target =  a_Instance.ba; // 终点
+  float segmentIndex = a_Position.x;
+  float segmentRatio = getSegmentRatio(segmentIndex);
+
+  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
+  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
+
+  vec2 s = source;
+  vec2 t = target;
+  
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    s = unProjCustomCoord(source);
+    t = unProjCustomCoord(target);
+  }
+  float total_Distance = pixelDistance(s, t) / 2.0 * PI;
+  v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / total_Distance;
+
+  styleMappingMat[3].b = segmentIndex / segmentNumber;
+
+  // styleMappingMat[0][1] - arcThetaOffset
+  vec4 curr = project_position(vec4(interpolate(source, target, segmentRatio, styleMappingMat[0][1]), 0.0, 1.0));
+  vec4 next = project_position(vec4(interpolate(source, target, nextSegmentRatio, styleMappingMat[0][1]), 0.0, 1.0));
+  // v_normal = getNormal((next.xy - curr.xy) * indexDir, a_Position.y);
+  //unProjCustomCoord
+  
+  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
+  
+
+  // gl_Position = project_common_position_to_clipspace(vec4(curr.xy + offset, 0, 1.0));
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    // gl_Position = u_Mvp * (vec4(curr.xy + offset, 0, 1.0));
+    gl_Position = u_Mvp * (vec4(curr.xy + offset, 0, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(curr.xy + offset, 0, 1.0));
+  }
+  gl_PointSize = 5.0;
+  setPickingColor(a_PickingColor);
+}

package/lib/line/shaders/dash/line_dash_frag.glsl

@@ -0,0 +1,31 @@
+#define LineTypeSolid 0.0
+uniform float u_opacity : 1.0;
+
+varying vec4 v_color;
+
+// dash
+varying vec4 v_dash_array;
+
+#pragma include "picking"
+
+uniform float u_time;
+uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ]; // 控制运动
+
+varying mat4 styleMappingMat;
+// [animate, duration, interval, trailLength],
+void main() {
+  float opacity = styleMappingMat[0][0];
+  float d_distance_ratio = styleMappingMat[3].r; // 当前点位距离占线总长的比例
+  gl_FragColor = v_color;
+  gl_FragColor.a *= opacity; // 全局透明度
+ 
+  float dashLength = mod(d_distance_ratio, v_dash_array.x + v_dash_array.y + v_dash_array.z + v_dash_array.w);
+  if(dashLength < v_dash_array.x || (dashLength > (v_dash_array.x + v_dash_array.y) && dashLength <  v_dash_array.x + v_dash_array.y + v_dash_array.z)) {
+    // 实线部分
+  } else {
+    // 虚线部分
+    discard;
+  };
+
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/line/shaders/dash/line_dash_vert.glsl

@@ -0,0 +1,93 @@
+#define LineTypeSolid 0.0
+#define LineTypeDash 1.0
+#define Animate 0.0
+
+attribute float a_Miter;
+attribute vec4 a_Color;
+attribute vec2 a_Size;
+attribute vec3 a_Normal;
+attribute vec3 a_Position;
+
+attribute vec2 a_iconMapUV;
+
+// dash line
+attribute float a_Total_Distance;
+attribute vec2 a_DistanceAndIndex;
+
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+uniform vec4 u_dash_array: [10.0, 5., 0, 0];
+
+uniform float u_vertexScale: 1.0;
+
+#pragma include "projection"
+#pragma include "picking"
+
+varying vec4 v_color;
+varying vec4 v_dash_array;
+
+uniform float u_opacity: 1.0;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+void main() {
+  // cal style mapping - 数据纹理映射部分的计算
+  styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0  // distance_ratio/distance/pixelLen/texV
+  );
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / a_Total_Distance;
+  v_color = a_Color;
+
+  vec3 size = a_Miter * setPickingSize(a_Size.x) * reverse_offset_normal(a_Normal);
+  vec2 offset = project_pixel(size.xy);
+
+  // 设置数据集的参数
+  styleMappingMat[3][0] = a_DistanceAndIndex.x / a_Total_Distance; // 当前点位距离占线总长的比例
+  styleMappingMat[3][1] = a_DistanceAndIndex.x;       // 当前顶点的距离
+
+  vec4 project_pos = project_position(vec4(a_Position.xy, 0, 1.0));
+
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, a_Size.y, 1.0));
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    gl_Position = u_Mvp * (vec4(project_pos.xy + offset, project_pixel(a_Size.y), 1.0));
+  } else {
+    float lineHeight = a_Size.y;
+ 
+    // #define COORDINATE_SYSTEM_P20 5.0
+    // #define COORDINATE_SYSTEM_P20_OFFSET 6.0
+    // amap1.x
+    if(u_CoordinateSystem == COORDINATE_SYSTEM_P20 || u_CoordinateSystem == COORDINATE_SYSTEM_P20_OFFSET) {
+      // 保持高度相对不变
+      lineHeight *= pow(2.0, 20.0 - u_Zoom);
+    }
+
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, lineHeight, 1.0));
+  }
+
+  setPickingColor(a_PickingColor);
+}

package/lib/line/shaders/half/line_half_frag.glsl

@@ -0,0 +1,53 @@
+#define COORDINATE_SYSTEM_LNGLAT 1.0        // mapbox
+#define COORDINATE_SYSTEM_LNGLAT_OFFSET 2.0 // mapbox offset
+#define COORDINATE_SYSTEM_VECTOR_TILE 3.0
+#define COORDINATE_SYSTEM_IDENTITY 4.0
+#define COORDINATE_SYSTEM_P20 5.0           // amap
+#define COORDINATE_SYSTEM_P20_OFFSET 6.0    // amap offset
+#define COORDINATE_SYSTEM_METER_OFFSET 7.0
+
+#define COORDINATE_SYSTEM_P20_2 8.0         // amap2.0
+uniform float u_CoordinateSystem;
+varying vec4 v_color;
+uniform float u_arrow: 0.0;
+uniform float u_linearColor: 0;
+uniform vec4 u_sourceColor;
+uniform vec4 u_targetColor;
+
+#pragma include "picking"
+
+varying mat4 styleMappingMat;
+void main() {
+  float distanceAndIndex = styleMappingMat[0][3];
+  float miter = styleMappingMat[0][2];
+
+  float opacity = styleMappingMat[0][0];
+  float d_distance_ratio = styleMappingMat[3].r; // 当前点位距离占线总长的比例
+
+
+  if(u_arrow > 0.0 && distanceAndIndex < 2.0) { // arrow
+    if(u_CoordinateSystem == COORDINATE_SYSTEM_P20 || u_CoordinateSystem == COORDINATE_SYSTEM_P20_OFFSET) { 
+      if(cross(vec3(styleMappingMat[1].rg, 0.0), vec3(styleMappingMat[1].ba, 0.0)).z < 0.0) { // amap
+        discard;
+      }
+    } else { // amap2 mapbox map
+      if(cross(vec3(styleMappingMat[1].rg, 0.0), vec3(styleMappingMat[1].ba, 0.0)).z > 0.0) { 
+        discard;
+      }
+    }
+  } else { // line body
+    if(miter < 0.0) {
+      discard;
+    }
+  }
+
+
+  if(u_linearColor == 1.0) { // 使用渐变颜色
+    gl_FragColor = mix(u_sourceColor, u_targetColor, d_distance_ratio);
+  } else { // 使用 color 方法传入的颜色
+    gl_FragColor = v_color;
+  }
+
+  gl_FragColor.a *= opacity; // 全局透明度
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/line/shaders/half/line_half_vert.glsl

@@ -0,0 +1,169 @@
+attribute float a_Miter;
+attribute vec4 a_Color;
+attribute vec2 a_Size;
+attribute vec3 a_Normal;
+attribute vec3 a_Position;
+
+// dash line
+attribute vec4 a_dirPoints;
+attribute vec3 a_DistanceAndIndex;
+
+uniform vec4 u_lineDir;
+
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+
+#pragma include "projection"
+#pragma include "picking"
+
+varying vec4 v_color;
+
+uniform float u_linearColor: 0;
+uniform float u_arrow: 0.0;
+uniform float u_arrowHeight: 3.0;
+uniform float u_arrowWidth: 2.0;
+uniform float u_tailWidth: 1.0;
+
+uniform float u_opacity: 1.0;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+vec2 calculateArrow(vec2 offset) {
+  /*
+  * 在支持箭头的时候，第二、第三组顶点是额外插入用于构建顶点的
+  */
+  float arrowFlag = -1.0;
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) {
+    // 高德 2.0 的旋转角度不同
+    arrowFlag = 1.0;
+  }
+  float pi = arrowFlag * 3.1415926/2.;
+  if(a_Miter < 0.) {
+    // 根据线的两侧偏移不同、旋转的方向相反
+    pi = -pi;
+  }
+  highp float angle_sin = sin(pi);
+  highp float angle_cos = cos(pi);
+  // 计算垂直与线方向的旋转矩阵
+  mat2 rotation_matrix = mat2(angle_cos, -1.0 * angle_sin, angle_sin, angle_cos);
+  float arrowWidth = u_arrowWidth;
+  float arrowHeight = u_arrowHeight;
+
+  vec2 arrowOffset = vec2(0.0);
+  /*
+  * a_DistanceAndIndex.y 用于标记当前顶点属于哪一组（两个顶点一组，构成线的其实是矩形，最简需要四个顶点、两组顶点构成）
+  */
+  if(a_DistanceAndIndex.y == 0.0) {
+    // 箭头尖部
+    offset = vec2(0.0);
+  } else if(a_DistanceAndIndex.y == 1.0) {
+    // 箭头两侧
+    arrowOffset = rotation_matrix*(offset * arrowHeight);
+    offset += arrowOffset; // 沿线偏移
+    offset = offset * arrowWidth; // 垂直线向外偏移（是构建箭头两侧的顶点）
+  } else if(a_DistanceAndIndex.y == 2.0 || a_DistanceAndIndex.y == 3.0 || a_DistanceAndIndex.y == 4.0) {
+    // 偏移其余的点位（将长度让位给箭头）
+    arrowOffset = rotation_matrix*(offset * arrowHeight) * arrowWidth;
+    offset += arrowOffset;// 沿线偏移
+  }
+
+  return offset;
+}
+
+void main() {
+  // cal style mapping - 数据纹理映射部分的计算
+  styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - a_Miter - a_DistanceAndIndex
+    0.0, 0.0, 0.0, 0.0, // originX - originY - vectorX - vectorY
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0  // distance_ratio/distance/pixelLen/texV
+  );
+  styleMappingMat[0][3] = a_DistanceAndIndex.y;
+  styleMappingMat[0][2] = a_Miter;
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+
+  v_color = a_Color;
+
+  vec3 size = a_Miter * setPickingSize(a_Size.x) * reverse_offset_normal(a_Normal);
+  
+  vec2 offset = project_pixel(size.xy);
+
+  // styleMappingMat[1].rg = a_Position.xy + offset;
+
+  vec2 copyOffset = vec2(offset.x, offset.y);
+
+  float lineDistance = a_DistanceAndIndex.x;
+  float total_Distance = a_DistanceAndIndex.z;
+  float currentLinePointRatio = lineDistance / total_Distance;
+ 
+  if(u_arrow > 0.0) {
+      //  计算箭头
+    offset = calculateArrow(offset);
+
+    if(a_DistanceAndIndex.y > 4.0) {
+      offset *= mix(1.0, u_tailWidth, currentLinePointRatio);
+    }
+  }
+
+  float lineOffsetWidth = length(offset + offset * sign(a_Miter)); // 线横向偏移的距离（向两侧偏移的和）
+  float linePixelSize = project_pixel(a_Size.x) * 2.0;  // 定点位置偏移，按地图等级缩放后的距离 单侧 * 2
+
+  // 设置数据集的参数
+  styleMappingMat[3][0] = currentLinePointRatio; // 当前点位距离占线总长的比例
+  styleMappingMat[3][1] = lineDistance;       // 当前顶点的距离
+
+  vec4 project_pos = project_position(vec4(a_Position.xy, 0, 1.0));
+
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, a_Size.y, 1.0));
+
+  float h = float(a_Position.z); // 线顶点的高度 - 兼容不存在第三个数值的情况 vertex height
+  float lineHeight = a_Size.y; // size 第二个参数代表的高度 [linewidth, lineheight]
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    lineHeight *= 0.2; // 保持和 amap/mapbox 一致的效果
+    gl_Position = u_Mvp * (vec4(project_pos.xy + offset, lineHeight, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, lineHeight, 1.0));
+  }
+  
+  if(u_arrow > 0.0 && a_DistanceAndIndex.y < 2.0) {
+    vec2 startPoint = a_dirPoints.rg;
+    vec2 endPoint = a_dirPoints.ba;
+    vec4 t1 = project_position(vec4(startPoint, 0, 1.0));
+    vec4 t2 = project_position(vec4(endPoint, 0, 1.0));
+    // TODO： 后续优化可以把位置计算放在 cpu 中完成
+    if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+      vec2 p1 = (u_Mvp * vec4(t1.xy, 0.0, 1.0)).xy;
+      vec2 p2 = (u_Mvp * vec4(t2.xy, 0.0, 1.0)).xy;
+      styleMappingMat[1].rg = normalize(p1 - p2);
+      styleMappingMat[1].ba = normalize(gl_Position.xy - p2);
+    } else {
+      vec2 p1 = project_common_position_to_clipspace(vec4(t1.xy, 0.0, 1.0)).xy;
+      vec2 p2 = project_common_position_to_clipspace(vec4(t2.xy, 0.0, 1.0)).xy;
+      styleMappingMat[1].rg = normalize(p1 - p2);
+      styleMappingMat[1].ba = normalize(gl_Position.xy - p2);
+    }
+  }
+
+  setPickingColor(a_PickingColor);
+}

package/lib/line/shaders/line_arc2d_vert.glsl

@@ -0,0 +1,114 @@
+#define LineTypeSolid 0.0
+#define LineTypeDash 1.0
+#define Animate 0.0
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+attribute vec4 a_Instance;
+attribute float a_Size;
+uniform mat4 u_ModelMatrix;
+uniform float segmentNumber;
+uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ];
+varying vec4 v_color;
+varying vec2 v_normal;
+
+varying float v_distance_ratio;
+uniform float u_line_type: 0.0;
+uniform vec4 u_dash_array: [10.0, 5., 0, 0];
+varying vec4 v_dash_array;
+
+#pragma include "projection"
+#pragma include "project"
+#pragma include "picking"
+
+float maps (float value, float start1, float stop1, float start2, float stop2) {
+    return start2 + (stop2 - start2) * ((value - start1) / (stop1 - start1));
+}
+
+float getSegmentRatio(float index) {
+    return smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
+}
+
+float paraboloid(vec2 source, vec2 target, float ratio) {
+    vec2 x = mix(source, target, ratio);
+    vec2 center = mix(source, target, 0.5);
+    float dSourceCenter = distance(source, center);
+    float dXCenter = distance(x, center);
+    return (dSourceCenter + dXCenter) * (dSourceCenter - dXCenter);
+}
+
+vec3 getPos(vec2 source, vec2 target, float segmentRatio) {
+     float vertex_height = paraboloid(source, target, segmentRatio);
+
+    return vec3(
+    mix(source, target, segmentRatio),
+    sqrt(max(0.0, vertex_height))
+    );
+}
+vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
+  // normalized direction of the line
+  vec2 dir_screenspace = normalize(line_clipspace);
+  // rotate by 90 degrees
+   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
+  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
+  return offset * vec2(1.0, -1.0);
+}
+vec2 getNormal(vec2 line_clipspace, float offset_direction) {
+  // normalized direction of the line
+  vec2 dir_screenspace = normalize(line_clipspace);
+  // rotate by 90 degrees
+   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
+   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
+}
+float getAngularDist (vec2 source, vec2 target) {
+  vec2 delta = source - target;
+  vec2 sin_half_delta = sin(delta / 2.0);
+  float a =
+    sin_half_delta.y * sin_half_delta.y +
+    cos(source.y) * cos(target.y) *
+    sin_half_delta.x * sin_half_delta.x;
+  return 2.0 * atan(sqrt(a), sqrt(1.0 - a));
+}
+vec2 interpolate (vec2 source, vec2 target, float angularDist, float t) {
+  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
+  if(abs(angularDist - PI) < 0.001) {
+    return (1.0 - t) * source + t * target;
+  }
+  float a = sin((1.0 - t) * angularDist) / sin(angularDist);
+  float b = sin(t * angularDist) / sin(angularDist);
+  vec2 sin_source = sin(source);
+  vec2 cos_source = cos(source);
+  vec2 sin_target = sin(target);
+  vec2 cos_target = cos(target);
+  float x = a * cos_source.y * cos_source.x + b * cos_target.y * cos_target.x;
+  float y = a * cos_source.y * sin_source.x + b * cos_target.y * sin_target.x;
+  float z = a * sin_source.y + b * sin_target.y;
+  return vec2(atan(y, x), atan(z, sqrt(x * x + y * y)));
+}
+
+void main() {
+  v_color = a_Color;
+  vec2 source = radians(a_Instance.rg);
+  vec2 target = radians(a_Instance.ba);
+  float angularDist = getAngularDist(source, target);
+  float segmentIndex = a_Position.x;
+  float segmentRatio = getSegmentRatio(segmentIndex);
+  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
+  if(u_line_type == LineTypeDash) {
+    v_distance_ratio = segmentIndex / segmentNumber;
+    float total_Distance = pixelDistance(a_Instance.rg, a_Instance.ba);
+    v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / (total_Distance / segmentNumber * segmentIndex);
+  }
+  if(u_animate.x == Animate) {
+      v_distance_ratio = segmentIndex / segmentNumber;
+  }
+  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
+  v_distance_ratio = segmentIndex / segmentNumber;
+  vec4 curr = project_position(vec4(degrees(interpolate(source, target, angularDist, segmentRatio)), 0.0, 1.0));
+  vec4 next = project_position(vec4(degrees(interpolate(source, target, angularDist, nextSegmentRatio)), 0.0, 1.0));
+  v_normal = getNormal((next.xy - curr.xy) * indexDir, a_Position.y);
+  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
+  //  vec4 project_pos = project_position(vec4(curr.xy, 0, 1.0));
+  gl_Position = project_common_position_to_clipspace(vec4(curr.xy + offset, curr.z, 1.0));
+  setPickingColor(a_PickingColor);
+}
+