ruby2d 0.12.0 → 1.0.0

data/examples/fluid_dynamics.rb

@@ -0,0 +1,340 @@
+# Fluid dynamics
+# A real-time grid fluid sim — a plume rises and the mouse injects currents.
+#
+# Colored smoke rises automatically from the bottom; move the mouse to
+# inject your own currents and add ink. Press space to pause, r to clear.
+#
+# Algorithm is Jos Stam's "Stable Fluids" (advection, diffusion,
+# pressure projection) on a ghost-celled grid; rendered cell-by-cell
+# into a Canvas via `fill_pixel_grid` for a single bulk blit per frame.
+
+require 'ruby2d'
+
+# === Tunables ===
+
+WIDTH = 800             # window width in pixels
+HEIGHT = 600            # window height in pixels
+CELL = 10               # pixel size of one simulation cell
+NX = WIDTH / CELL       # grid columns (interior cells)
+NY = HEIGHT / CELL      # grid rows (interior cells)
+LIN_ITERS = 4           # Gauss-Seidel iterations per linear solve
+VISC = 0.00005          # velocity diffusion (viscosity)
+DT = 1.0 / 30.0         # numerical sim step size (internal, not wall-clock)
+SIM_RATE = 60           # sim steps per second (wall-clock pacing)
+DECAY = 0.992           # per-step dye decay (1.0 = lossless)
+PLUME_DYE = 8.0         # dye injection rate at the auto-plume center
+PLUME_VEL = 1.5         # upward velocity at the auto-plume center
+MOUSE_DYE = 20.0        # dye injection rate at the cursor
+MOUSE_VEL = 8.0         # velocity per pixel of mouse motion
+HUE_RATE = 0.35         # mouse-injection hue cycles per second
+
+SIZE_X = NX + 2         # row stride (interior + 2 ghost cells)
+SIZE_Y = NY + 2
+SIZE2 = SIZE_X * SIZE_Y
+
+# === Window ===
+
+set title: 'Ruby 2D ▸ Examples ▸ Fluid dynamics', width: WIDTH, height: HEIGHT, background: '#050816'
+set close_on_esc: true
+
+# === Canvas ===
+
+canvas = Canvas.new(width: WIDTH, height: HEIGHT, fill: [0.02, 0.03, 0.08, 1])
+
+# === Solver helpers ===
+
+def set_bnd(b, x)
+  # Top/bottom rows (mirror or negate vertical velocity for b == 2)
+  1.upto(NX) do |i|
+    x[i]                     = b == 2 ? -x[i + SIZE_X]      : x[i + SIZE_X]
+    x[i + (NY + 1) * SIZE_X] = b == 2 ? -x[i + NY * SIZE_X] : x[i + NY * SIZE_X]
+  end
+  # Left/right columns (mirror or negate horizontal velocity for b == 1)
+  1.upto(NY) do |j|
+    x[j * SIZE_X]          = b == 1 ? -x[1 + j * SIZE_X]  : x[1 + j * SIZE_X]
+    x[NX + 1 + j * SIZE_X] = b == 1 ? -x[NX + j * SIZE_X] : x[NX + j * SIZE_X]
+  end
+  # Four corners — average of the two adjacent edges
+  x[0]                          = 0.5 * (x[1] + x[SIZE_X])
+  x[(NY + 1) * SIZE_X]          = 0.5 * (x[1 + (NY + 1) * SIZE_X] + x[NY * SIZE_X])
+  x[NX + 1]                     = 0.5 * (x[NX] + x[NX + 1 + SIZE_X])
+  x[NX + 1 + (NY + 1) * SIZE_X] = 0.5 * (x[NX + (NY + 1) * SIZE_X] + x[NX + 1 + NY * SIZE_X])
+end
+
+def lin_solve(b, x, x0, a, c)
+  LIN_ITERS.times do
+    1.upto(NY) do |j|
+      base = j * SIZE_X
+      1.upto(NX) do |i|
+        idx = i + base
+        x[idx] = (x0[idx] + a * (x[idx - 1] + x[idx + 1] + x[idx - SIZE_X] + x[idx + SIZE_X])) / c
+      end
+    end
+    set_bnd(b, x)
+  end
+end
+
+def diffuse(b, x, x0, diff, dt)
+  a = dt * diff * NX * NX
+  lin_solve(b, x, x0, a, 1 + 4 * a)
+end
+
+def advect(b, d, d0, u, v, dt)
+  # Semi-Lagrangian: dt0_x in cells-per-time-unit along x (likewise y), so
+  # u and v stay in domain units even when NX != NY.
+  dt0_x = dt * NX
+  dt0_y = dt * NY
+  1.upto(NY) do |j|
+    1.upto(NX) do |i|
+      idx = i + j * SIZE_X
+      x = i - dt0_x * u[idx]
+      y = j - dt0_y * v[idx]
+      x = 0.5 if x < 0.5
+      x = NX + 0.5 if x > NX + 0.5
+      y = 0.5 if y < 0.5
+      y = NY + 0.5 if y > NY + 0.5
+      i0 = x.to_i
+      i1 = i0 + 1
+      j0 = y.to_i
+      j1 = j0 + 1
+      s1 = x - i0
+      s0 = 1 - s1
+      t1 = y - j0
+      t0 = 1 - t1
+      d[idx] = s0 * (t0 * d0[i0 + j0 * SIZE_X] + t1 * d0[i0 + j1 * SIZE_X]) +
+               s1 * (t0 * d0[i1 + j0 * SIZE_X] + t1 * d0[i1 + j1 * SIZE_X])
+    end
+  end
+  set_bnd(b, d)
+end
+
+def project(u, v, p, div)
+  h = 1.0 / NX
+  1.upto(NY) do |j|
+    1.upto(NX) do |i|
+      idx = i + j * SIZE_X
+      div[idx] = -0.5 * h * (u[idx + 1] - u[idx - 1] + v[idx + SIZE_X] - v[idx - SIZE_X])
+      p[idx] = 0.0
+    end
+  end
+  set_bnd(0, div)
+  set_bnd(0, p)
+  lin_solve(0, p, div, 1.0, 4.0)
+  1.upto(NY) do |j|
+    1.upto(NX) do |i|
+      idx = i + j * SIZE_X
+      u[idx] -= 0.5 * (p[idx + 1] - p[idx - 1]) / h
+      v[idx] -= 0.5 * (p[idx + SIZE_X] - p[idx - SIZE_X]) / h
+    end
+  end
+  set_bnd(1, u)
+  set_bnd(2, v)
+end
+
+def hsv_to_rgb(h, s, v)
+  i = (h * 6).floor
+  f = h * 6 - i
+  p = v * (1 - s)
+  q = v * (1 - f * s)
+  tt = v * (1 - (1 - f) * s)
+  case i % 6
+  when 0 then [v, tt, p]
+  when 1 then [q, v, p]
+  when 2 then [p, v, tt]
+  when 3 then [p, q, v]
+  when 4 then [tt, p, v]
+  else        [v, p, q]
+  end
+end
+
+# === Mutable state ===
+
+dye      = Array.new(3) { Array.new(SIZE2, 0.0) }
+dye_prev = Array.new(3) { Array.new(SIZE2, 0.0) }
+u      = Array.new(SIZE2, 0.0)
+u_prev = Array.new(SIZE2, 0.0)
+v      = Array.new(SIZE2, 0.0)
+v_prev = Array.new(SIZE2, 0.0)
+
+# Render buffer: NX*NY cells × 4 floats (r, g, b, a). Pre-allocated and
+# overwritten in place each frame to skip per-frame allocation.
+colors = Array.new(NX * NY * 4, 0.0)
+
+mouse_x = WIDTH / 2
+mouse_y = HEIGHT / 2
+prev_mx = mouse_x
+prev_my = mouse_y
+mouse_inside = false
+paused = false
+tick = 0
+sim_accum = 0.0
+
+# === Input ===
+
+on :mouse_enter do
+  mouse_inside = true
+end
+
+on :mouse_leave do
+  mouse_inside = false
+  # Resync prev on re-entry so the first move post-leave doesn't inject
+  # a huge ghost delta from the stale prior position.
+  prev_mx = mouse_x
+  prev_my = mouse_y
+end
+
+on :mouse_move do |event|
+  mouse_x = event.x
+  mouse_y = event.y
+end
+
+on key_down: :space do
+  paused = !paused
+end
+
+on key_down: :r do
+  SIZE2.times do |i|
+    u[i] = 0.0
+    v[i] = 0.0
+    dye[0][i] = 0.0
+    dye[1][i] = 0.0
+    dye[2][i] = 0.0
+  end
+  canvas.clear
+end
+
+# === Per-frame update ===
+
+update do |dt|
+  next if paused
+  dt = [dt, 1.0 / 30].min  # cap so a stall can't trigger a runaway catch-up
+
+  sim_accum += SIM_RATE * dt
+  count = sim_accum.to_i
+  sim_accum -= count
+
+  count.times do
+    tick += 1
+
+    # Reset source buffers; injectors below write into them.
+    SIZE2.times do |i|
+      u_prev[i] = 0.0
+      v_prev[i] = 0.0
+      dye_prev[0][i] = 0.0
+      dye_prev[1][i] = 0.0
+      dye_prev[2][i] = 0.0
+    end
+
+    # Auto-plume at the bottom — disk of warm dye + upward velocity, with
+    # a sin-wave horizontal sway to keep the plume from being too tidy.
+    plume_cx = NX / 2 + (Math.sin(tick * 0.04) * NX * 0.18).round
+    plume_cy = NY - 3
+    plume_rgb = hsv_to_rgb((elapsed * HUE_RATE * 0.3) % 1.0, 0.8, 1.0)
+    -3.upto(3) do |oy|
+      -3.upto(3) do |ox|
+        next if ox * ox + oy * oy > 10
+        x = plume_cx + ox
+        y = plume_cy + oy
+        next unless x.between?(1, NX) && y.between?(1, NY)
+        falloff = 1.0 - Math.sqrt(ox * ox + oy * oy) / 4.0
+        idx = x + y * SIZE_X
+        dye_prev[0][idx] = plume_rgb[0] * falloff * PLUME_DYE
+        dye_prev[1][idx] = plume_rgb[1] * falloff * PLUME_DYE
+        dye_prev[2][idx] = plume_rgb[2] * falloff * PLUME_DYE
+        u_prev[idx] = Math.sin(tick * 0.07) * falloff * PLUME_VEL * 0.4
+        v_prev[idx] = -falloff * PLUME_VEL
+      end
+    end
+
+    if mouse_inside
+      cx = (mouse_x.to_f / CELL).to_i.clamp(1, NX)
+      cy = (mouse_y.to_f / CELL).to_i.clamp(1, NY)
+      # Mouse delta stays in pixels so MOUSE_VEL is comparable to stable_fluids'
+      # VEL_INJECT — a 1px drag injects MOUSE_VEL units of velocity.
+      mdx = (mouse_x - prev_mx).to_f
+      mdy = (mouse_y - prev_my).to_f
+      mouse_rgb = hsv_to_rgb((elapsed * HUE_RATE) % 1.0, 0.85, 1.0)
+      -2.upto(2) do |oy|
+        -2.upto(2) do |ox|
+          next if ox * ox + oy * oy > 6
+          x = (cx + ox).clamp(1, NX)
+          y = (cy + oy).clamp(1, NY)
+          falloff = 1.0 - Math.sqrt(ox * ox + oy * oy) / 3.0
+          idx = x + y * SIZE_X
+          dye_prev[0][idx] += mouse_rgb[0] * falloff * MOUSE_DYE
+          dye_prev[1][idx] += mouse_rgb[1] * falloff * MOUSE_DYE
+          dye_prev[2][idx] += mouse_rgb[2] * falloff * MOUSE_DYE
+          u_prev[idx] += mdx * falloff * MOUSE_VEL
+          v_prev[idx] += mdy * falloff * MOUSE_VEL
+        end
+      end
+    end
+    prev_mx = mouse_x
+    prev_my = mouse_y
+
+    # Velocity step: add sources, diffuse, project, advect, project
+    SIZE2.times do |i|
+      u[i] += DT * u_prev[i]
+      v[i] += DT * v_prev[i]
+    end
+    u, u_prev = u_prev, u
+    diffuse(1, u, u_prev, VISC, DT)
+    v, v_prev = v_prev, v
+    diffuse(2, v, v_prev, VISC, DT)
+    project(u, v, u_prev, v_prev)
+    u, u_prev = u_prev, u
+    v, v_prev = v_prev, v
+    advect(1, u, u_prev, u_prev, v_prev, DT)
+    advect(2, v, v_prev, u_prev, v_prev, DT)
+    project(u, v, u_prev, v_prev)
+
+    # Dye step per channel: add sources, advect by the divergence-free
+    # velocity field, then decay.
+    3.times do |c|
+      d = dye[c]
+      d_prev = dye_prev[c]
+      SIZE2.times { |i| d[i] += DT * d_prev[i] }
+      dye[c], dye_prev[c] = dye_prev[c], dye[c]
+      advect(0, dye[c], dye_prev[c], u, v, DT)
+      d = dye[c]
+      SIZE2.times { |i| d[i] *= DECAY }
+    end
+  end
+
+  # === Render ===
+  #
+  # Pack the interior cells into the pre-allocated colors buffer and blit
+  # in one `fill_pixel_grid` call. Per-cell clamps keep colors in 0..1;
+  # alpha is the channel sum (capped) so empty cells stay transparent.
+  dr = dye[0]
+  dg = dye[1]
+  db = dye[2]
+  ci = 0
+  1.upto(NY) do |j|
+    base = j * SIZE_X
+    1.upto(NX) do |i|
+      idx = i + base
+      r = dr[idx]
+      g = dg[idx]
+      b = db[idx]
+      r = 0.0 if r < 0.0
+      r = 1.0 if r > 1.0
+      g = 0.0 if g < 0.0
+      g = 1.0 if g > 1.0
+      b = 0.0 if b < 0.0
+      b = 1.0 if b > 1.0
+      a = r + g + b
+      a = 1.0 if a > 1.0
+      colors[ci]     = r
+      colors[ci + 1] = g
+      colors[ci + 2] = b
+      colors[ci + 3] = a
+      ci += 4
+    end
+  end
+
+  canvas.clear
+  canvas.fill_pixel_grid(cols: NX, rows: NY, cell_w: CELL, cell_h: CELL, colors: colors)
+end
+
+show

data/examples/fourier_epicycles.rb

@@ -0,0 +1,142 @@
+# Fourier epicycles
+# A chain of rotating circles traces a heart — the DFT made visible.
+#
+# Any closed 2D curve is a sum of rotating vectors — what the discrete
+# Fourier transform tells us. Each frequency component is a circle that
+# rotates at its own rate; chained tip-to-tail in order of decreasing
+# radius, the end of the chain traces the original shape. Here, that
+# shape is a heart. Press R to redraw the trail.
+
+require 'ruby2d'
+
+# === Tunables ===
+
+WIDTH = 800              # window width in pixels
+HEIGHT = 600             # window height in pixels
+N = 128                  # number of samples and DFT components
+TRAIL_PERIOD = 8.0       # seconds for one full revolution / heart trace
+SHAPE_SCALE = 14         # how big to draw the heart
+TRAIL_LEN = 800          # max points retained in the trace history
+MIN_CIRCLE_R = 0.6       # circles smaller than this aren't drawn (clutter)
+
+CENTER_X = WIDTH  / 2.0
+CENTER_Y = HEIGHT / 2.0
+
+# === Window ===
+
+set title: 'Ruby 2D ▸ Examples ▸ Fourier epicycles',
+    width: WIDTH, height: HEIGHT, background: '#0b1020'
+set close_on_esc: true
+
+# === Target shape: parametric heart ===
+
+# Math y-up, screen y-down — negate y when laying it on the canvas.
+target = N.times.map do |i|
+  t = 2 * Math::PI * i / N
+  hx = 16 * Math.sin(t)**3
+  hy = 13 * Math.cos(t) - 5 * Math.cos(2 * t) - 2 * Math.cos(3 * t) - Math.cos(4 * t)
+  Complex(CENTER_X + SHAPE_SCALE * hx, CENTER_Y - SHAPE_SCALE * hy)
+end
+
+# === DFT ===
+
+# c_k = (1/N) Σ_n target[n] * exp(-2πi k n / N).
+# Frequencies wrap: indices ≥ N/2 represent negative frequencies.
+coeffs = N.times.map do |k|
+  sum = Complex(0, 0)
+  N.times do |n|
+    angle = -2 * Math::PI * k * n / N
+    sum += target[n] * Complex(Math.cos(angle), Math.sin(angle))
+  end
+  sum / N
+end
+freqs = N.times.map { |k| k < N / 2 ? k : k - N }
+
+# Chain components in order of descending amplitude. Drop k=0 — the DC
+# component is the centroid; we use it as the chain's anchor instead of
+# drawing it as a giant first vector.
+order = (0...N).reject { |i| i == 0 }.sort_by { |i| -coeffs[i].abs }
+ANCHOR_X = coeffs[0].real
+ANCHOR_Y = coeffs[0].imaginary
+
+# === State ===
+
+# chain[i] is the position of the i-th joint in the epicycle chain at
+# the current time. chain[0] is the anchor; chain[-1] is the trace.
+chain = Array.new(order.length + 1) { [0.0, 0.0] }
+trail = []
+time = 0.0
+
+# === Input ===
+
+on key_down: :r do
+  trail.clear
+  time = 0.0
+end
+
+# === Per-frame update ===
+
+# Walk the chain once per frame, accumulating each component's rotated
+# vector. The inner work is straight complex multiplication unrolled
+# into pairs of reals; with N≈128 this stays well under a millisecond.
+update do |dt|
+  time += dt
+  t = (time / TRAIL_PERIOD) % 1.0
+
+  px = ANCHOR_X
+  py = ANCHOR_Y
+  chain[0][0] = px
+  chain[0][1] = py
+  order.each_with_index do |k, idx|
+    angle = 2 * Math::PI * freqs[k] * t
+    rotor_re = Math.cos(angle)
+    rotor_im = Math.sin(angle)
+    cre = coeffs[k].real
+    cim = coeffs[k].imaginary
+    px += cre * rotor_re - cim * rotor_im
+    py += cre * rotor_im + cim * rotor_re
+    slot = chain[idx + 1]
+    slot[0] = px
+    slot[1] = py
+  end
+
+  trail << [px, py]
+  trail.shift while trail.length > TRAIL_LEN
+end
+
+# === Render ===
+
+EPI_STROKE = [0.62, 0.78, 1.0, 0.18].freeze   # faint blue circle outlines
+ARM_COLOR  = [0.62, 0.78, 1.0, 0.55].freeze   # arm linking the centers
+TRAIL_COLOR = '#fbbf24'
+TIP_OUTER = [0.99, 0.95, 0.55, 0.45].freeze
+TIP_INNER = '#fef3c7'
+
+render do
+  # Each epicycle: faint outline circle at the joint, then a line out
+  # to the next joint. Tiny components are skipped so the eye isn't
+  # buried under hairline circles.
+  n = chain.length - 1
+  i = 0
+  while i < n
+    px = chain[i][0]
+    py = chain[i][1]
+    nx = chain[i + 1][0]
+    ny = chain[i + 1][1]
+    r = Math.hypot(nx - px, ny - py)
+    if r > MIN_CIRCLE_R
+      Circle.render(x: px, y: py, radius: r,
+                    fill: false, stroke_width: 1, stroke_color: EPI_STROKE)
+    end
+    Line.render(x1: px, y1: py, x2: nx, y2: ny, stroke_width: 1, color: ARM_COLOR)
+    i += 1
+  end
+
+  Polyline.render(points: trail, stroke_width: 2.5, color: TRAIL_COLOR) if trail.length >= 2
+
+  tip = chain.last
+  Circle.render(x: tip[0], y: tip[1], radius: 8, color: TIP_OUTER)
+  Circle.render(x: tip[0], y: tip[1], radius: 3, color: TIP_INNER)
+end
+
+show