badline 0.12.1 → 0.14.0

data/lib/badline/vic/sprite/shifter.rb

@@ -1,146 +0,0 @@
-# frozen_string_literal: true
-
-module Badline
-  class VIC
-    class Sprite
-      # The X comparator and the 24-bit shift register behind it: where a
-      # line fires the sprite, and the pixels each firing shifts out.
-      module Shifter
-        private
-
-        # The first pixel of every comparator match along the line. Writes to
-        # $d000/$d010 move the compare value mid-line, so a sprite can miss
-        # its match entirely and pick up a later one, a second one, or none.
-        def comparator_hits(log)
-          return compare_x(@registers) unless log
-
-          hits = []
-          log.rewind
-          log.advance(0)
-          from = 0
-          while from < @width
-            upto = [log.next_x, @width].min
-            compare_x(log).each do |start|
-              match = (start - 1) % @width
-              hits << start if match >= from && match < upto
-            end
-            break if upto >= @width
-
-            from = upto
-            log.advance(from)
-          end
-          hits
-        end
-
-        # The pixels the sprite starts at, one past each comparator match.
-        # The 6569's X counter only runs to 503, so the eight coordinates
-        # above it never match and the sprite stays dark — the gap the
-        # spritegap tests find at $1f8.
-        def compare_x(view)
-          msb = view[0x10].anybits?(@bit) ? 0x100 : 0
-          @timing.x_pixels[msb | view[index * 2]]
-        end
-
-        # Pixels from the X match to the next reload.
-        def reload_cut(start) = (start < @reload_x ? @reload_x : @reload_x + @width) - start
-
-        # A run that reaches the next reload is cut there, holding its last
-        # pixel through K+6. Returns the span that is left.
-        def cut_at_reload(cut, span, codes)
-          return span if cut > span || cut >= MAX_SPAN
-
-          RELOAD_HOLD.times { |i| codes[cut + i] = codes[cut - 1] }
-          cut + RELOAD_HOLD
-        end
-
-        # Shift one firing out into `codes`, up to the sprite's end, `cut`
-        # pixels from the reload.
-        def run(log, start, codes, bits, cut)
-          @sr = bits
-          log&.rewind
-          pos = start
-          count = 0
-          boundary = log ? 0 : Float::INFINITY
-          mc = multicolor?
-          expanded = x_expanded?
-          while count < MAX_SPAN
-            if pos >= boundary
-              log.advance(pos)
-              expanded = log[0x1d].anybits?(@bit)
-              mc = logged_multicolor(log, mc, expanded, count)
-              boundary = log.next_x
-            end
-            count.zero? ? prime(mc) : step(mc, expanded, count == cut - 1)
-            break if @latch.zero? && @sr.zero?
-
-            codes[count] = @latch
-            count += 1
-            pos += 1
-          end
-          count
-        end
-
-        # The X match loads the shift register and arms both flip-flops, so
-        # the sprite's first pixel comes straight off the fetched row.
-        def prime(multicolor)
-          @mc_flop = @new_chip && !multicolor
-          @xe_flop = false
-          @latch = (@sr >> 22) & (multicolor ? 3 : 2)
-        end
-
-        # The multicolor bit as the log has it at the pixel. A change after
-        # the first pixel reaches the 8565's flip-flop.
-        def logged_multicolor(log, was, expanded, count)
-          multicolor = log[0x1c].anybits?(@bit)
-          switch_multicolor(multicolor, expanded) if @new_chip && multicolor != was && count.positive?
-          multicolor
-        end
-
-        # On the 8565 a multicolor change works on the flip-flop instead of
-        # the next pixels. It stays as it is unless the change lands between
-        # the two halves of an expanded pixel, where it flips, or is set by a
-        # switch to hi-res.
-        def switch_multicolor(multicolor, expanded)
-          return unless expanded && !@xe_flop
-
-          @mc_flop = multicolor ? !@mc_flop : true
-        end
-
-        # One pixel of the sequencer. An unexpanded sprite shifts every pixel;
-        # an expanded one shifts every other, and the multicolor latch reloads
-        # every other shift, so its pairs stretch with the expansion. Both
-        # flip-flops sit idle while their register bit is clear, which is why
-        # the first pixel after a mid-sprite change repeats the last one.
-        def step(multicolor, expanded, last)
-          shift = true
-          if expanded
-            shift = @xe_flop
-            @xe_flop = !@xe_flop
-          else
-            @xe_flop = false
-          end
-          @mc_flop = false unless multicolor || @new_chip
-          return unless shift
-
-          @sr = (@sr << 1) & 0xffffff
-          load_latch(multicolor, last)
-        end
-
-        # A multicolor pair loaded on the last pixel before the reload keeps
-        # only its high bit, as a hi-res pixel does (spritefetchbug).
-        # On the 8565 a hi-res pixel with the multicolor flip-flop clear
-        # sets it and loads nothing, so the latch repeats its last pixel.
-        def load_latch(multicolor, last)
-          if multicolor
-            @latch = (@sr >> 22) & (last ? 2 : 3) if @mc_flop
-            @mc_flop = !@mc_flop
-          elsif @new_chip && !@mc_flop
-            @mc_flop = true
-          else
-            @latch = (@sr >> 22) & 2
-          end
-        end
-      end
-    end
-  end
-end

data/lib/badline/vic/sprite/timing.rb

@@ -1,56 +0,0 @@
-# frozen_string_literal: true
-
-module Badline
-  class VIC
-    class Sprite
-      # = Timing
-      #
-      # Where a region puts the sprites in the line: the cycles of their
-      # fetches and of the display compare, the pixels those land on, and
-      # the raster pixels the X counter reads each coordinate at. Where the
-      # fetches or the compare run a cycle later than on the 6569, what
-      # hangs off them moves 8 pixels with them.
-      class Timing
-        # The X counter's value where it steps back on a raster of more than
-        # 512 pixels, to run over the eight values below it again.
-        HOLD_AT = 0x188
-
-        attr_reader :columns, :sprite_cycle, :display_off_x, :x_pixels
-
-        def initialize(region)
-          @columns = region.cycles_per_line
-          @sprite_cycle = region.sprite_cycle
-          @shift = region.sprite_cycle - Region::PAL.sprite_cycle
-          @display_off_x = DISPLAY_OFF_X + (8 * (region.sprite_display_cycle - Region::PAL.sprite_display_cycle))
-          @x_pixels = Timing.x_pixels(@columns * 8, region.x_hold)
-        end
-
-        # The column BA falls in for a sprite's own fetch: 55 for sprite 0 on
-        # the 6569, and two later for each sprite after it.
-        def ba_column(index) = 55 + @shift + (2 * index)
-
-        # The raster pixel of a sprite's reload, counted from the start of
-        # the line it is fetched on, so past the end of it for sprites 3-7
-        # on the 6569.
-        def reload_x(index) = RELOAD_X + (8 * @shift) + (RELOAD_STEP * index)
-
-        # The X counter at a raster pixel: X_OFFSET behind it, wrapping at
-        # the end of the line, less the pixels it held for from HOLD_AT on,
-        # where it ran over $180-$187 a second time.
-        def self.xpos(pixel, width, hold)
-          count = (pixel - X_OFFSET) % width
-          count < HOLD_AT ? count : count - hold
-        end
-
-        # The raster pixels at which the X counter reads each coordinate, 512
-        # lists. A sprite starts at one where its X matches. On the 6569 the
-        # coordinates past 503 have none.
-        def self.x_pixels(width, hold)
-          pixels = Array.new(512) { [] }
-          width.times { |pixel| pixels[xpos(pixel, width, hold)] << pixel }
-          pixels.each(&:freeze).freeze
-        end
-      end
-    end
-  end
-end

data/lib/badline/vic/sprite.rb

@@ -1,337 +0,0 @@
-# frozen_string_literal: true
-
-require "badline/vic/sprite/internal_bus"
-require "badline/vic/sprite/shifter"
-require "badline/vic/sprite/saved_state"
-require "badline/vic/sprite/timing"
-
-module Badline
-  class VIC
-    # = Sprite
-    #
-    # The DMA/display state machine and the pixel sequencer for one sprite.
-    # The sequencer is a 24-bit shift register clocked once per pixel: the X
-    # comparator starts it, the expansion flip-flop gates the shift, and the
-    # multicolor flip-flop gates a two-bit output latch that feeds the color
-    # mux. Registers written mid-sprite therefore take hold from the pixel
-    # they reach, rather than re-decoding the row.
-    class Sprite
-      X_OFFSET = 104
-
-      # MCBASE and MC are six-bit byte counters into the sprite's 64-byte
-      # block. A sprite ends when MCBASE reaches exactly 63, which is why a
-      # mid-line $d017 write that steps it past 63 keeps it running.
-      LAST_MCBASE = 63
-      MC_MASK = 0x3f
-
-      # 24 bits at two pixels each, plus slack for a mid-sprite expansion
-      # change stretching the tail.
-      MAX_SPAN = 64
-
-      # Latch codes are the multicolor bit pairs: 0 is transparent, 1 and 3
-      # are the shared colors, 2 the sprite's own.
-      SHARED0 = 1
-      OWN_COLOR = 2
-      SHARED1 = 3
-
-      # The s-accesses reload the shift register partway through the line,
-      # at raster pixel 459 for sprite 0 and 16 later for each sprite after
-      # it. A sprite still shifting there loses the rest of its row, and the
-      # comparator is ignored for the twelve pixels from it, running on into
-      # the next line from a reload near the end of this one (the spritescan
-      # dumps). Its output holds the last pixel for seven, through K+6
-      # (spritefetchbug).
-      RELOAD_X = 459
-      RELOAD_STEP = 16
-      RELOAD_DEAD = 12
-      RELOAD_HOLD = 7
-
-      # On the line of its last row, a sprite whose DMA ended at cycle 16
-      # loses its display at cycle 58, so no hit from this pixel on starts
-      # it (spritegap3). One already shifting runs on. A region whose
-      # display compare falls later moves it with the compare.
-      DISPLAY_OFF_X = 460
-
-      include Shifter
-      include SavedState
-
-      attr_reader :index, :leftmost, :span, :codes,
-                  :reload_leftmost, :reload_span, :reload_codes
-
-      def initialize(index, registers, bank, bus, model: :mos6569)
-        @index = index
-        @new_chip = model == :mos8565
-        @registers = registers
-        @bank = bank
-        @bus = bus
-        @width = bus.columns * 8
-        @timing = bus.timing
-        @bit = 1 << index
-        @dma = false
-        @display_on = false
-        @mcbase = 0
-        @mc = 0
-        @exp_ff = true
-        @crunched_mc = nil
-        @bits = 0
-        @row_ready = false
-        @codes = Array.new(MAX_SPAN + RELOAD_HOLD, 0)
-        @leftmost = 0
-        @span = 0
-        @reload_codes = Array.new(MAX_SPAN + RELOAD_HOLD, 0)
-        @reload_leftmost = 0
-        @reload_span = 0
-        reload = @timing.reload_x(index)
-        @reload_x = reload % @width
-        @reload_next_line = reload < @width
-        @sr = 0
-        @latch = 0
-        @mc_flop = false
-        @xe_flop = false
-        @first_byte_lost = false
-        @blind = false
-        @show_from = 0
-      end
-
-      def displaying? = @dma
-
-      # True when this line has a row for the sequencer: its own, the next
-      # one for a sprite that reloads late in the line, or the last one for
-      # a sprite that reloads at its start.
-      def rendering?
-        return true if @row_ready
-
-        @reload_next_line ? @dma && @display_on : !@prev_bits.nil?
-      end
-
-      def enabled? = @registers[0x15].anybits?(@bit)
-      def multicolor? = @registers[0x1c].anybits?(@bit)
-      def x_expanded? = @registers[0x1d].anybits?(@bit)
-      def y_expanded? = @registers[0x17].anybits?(@bit)
-      def priority? = @registers[0x1b].anybits?(@bit)
-
-      def x
-        msb = @registers[0x10].anybits?(@bit) ? 0x100 : 0
-        msb | @registers[index * 2]
-      end
-
-      # The Y comparator is eight bits wide, so the PAL lines above 255
-      # match the coordinates 0-55 a second time (spritey).
-      def y_match?(line) = (line & 0xff) == @registers[(index * 2) + 1]
-
-      def color = @registers[0x27 + index] & 0x0f
-
-      # Cycle 16: MCBASE takes MC, which the three s-accesses stepped past
-      # the row, but only while the expansion flip-flop is set.
-      def advance_mcbase
-        mc = @crunched_mc || ((@mc + 3) & MC_MASK)
-        @crunched_mc = nil
-        @mcbase = mc if @exp_ff && @dma
-      end
-
-      # The end-of-sprite compare, a column after MCBASE moves. MCBASE has
-      # to land on 63 exactly, so a crunched sprite steps over it and runs
-      # on through the rest of its block. Only the DMA stops here; the
-      # display waits for cycle 58.
-      def finish_mcbase
-        @dma = false if @mcbase == LAST_MCBASE
-      end
-
-      # Clearing MxYE sets the expansion flip-flop at once. Cleared in
-      # cycle 15, while the flip-flop is still reset, it also crunches MC:
-      # the bits step to a mix of MC and MCBASE (Bauer §3.8, VICE
-      # `d017_store`) that cycle 16 then hands to MCBASE.
-      def clear_y_expansion(crunch)
-        return if @exp_ff
-
-        @exp_ff = true
-        return unless crunch && @dma
-
-        mc = (@mc + 3) & MC_MASK
-        @crunched_mc = (0x2a & @mcbase & mc) | (0x15 & (@mcbase | mc))
-      end
-
-      # Cycle 56, after the second Y compare: MxYE inverts the expansion
-      # flip-flop of a sprite with DMA running.
-      def toggle_expansion
-        @exp_ff = !@exp_ff if @dma && y_expanded?
-      end
-
-      # Cycles 55 and 56: a Y/enable match starts the DMA and rewinds
-      # MCBASE, and returns true. Display is enabled separately in cycle 58,
-      # so the rows render from the following line on.
-      #
-      # On the VIC's side, BA falls at the sprite's own column
-      # (Timing#ba_column) — 55 for sprite 0 on the 6569, two later for each
-      # sprite after it, a column behind the window the CPU sees
-      # (VIC#layout_columns) — or two columns after
-      # this compare, whichever is later. AEC follows three columns on, and
-      # the first of the three s-accesses runs in the column it arrives in:
-      # a DMA starting on the second compare therefore loses that access for
-      # sprite 0, alone among the eight in following the compares
-      # immediately (spriteenable2).
-      def check_dma(line, column)
-        return false if @dma || !enabled? || !y_match?(line)
-
-        @first_byte_lost = column + 2 > @timing.ba_column(index)
-        @dma = true
-        @mcbase = 0
-        @exp_ff = true
-      end
-
-      # Cycle 58: MC is reloaded from MCBASE for the coming row, and a
-      # sprite with DMA running starts displaying only while MxE and Y still
-      # match — a write to either between the compares and here keeps the
-      # data fetch running invisibly. The display goes off only here, and
-      # only once the DMA has, so a DMA restarted on the line of its last
-      # row keeps a display that was already on (spriterestart).
-      def check_display(line)
-        @mc = @mcbase
-        if @dma
-          @display_on = true if enabled? && y_match?(line)
-        else
-          @display_on = false
-        end
-        blind_fetch if @blind && @display_on
-      end
-
-      # The address of the s-access that falls in phi1, the middle of the
-      # three, or nil when the sprite's DMA is off and the VIC idles there.
-      def phi1_address
-        (pointer * 64) + ((@mc + 1) & MC_MASK) if @dma
-      end
-
-      # The row fetched at the end of the previous line renders on this one.
-      # A lost first s-access reads back the $ff the CPU is still driving.
-      def start_line
-        @span = 0
-        @reload_span = 0
-        @prev_bits = (@bits if @row_ready && @dma)
-        @row_ready = false
-        @blind = !@dma && !@reload_next_line
-        @show_from = 0
-        lost = @first_byte_lost
-        @first_byte_lost = false
-        return unless @dma && @display_on
-
-        @bits = row_bits(@mc)
-        @bits |= 0xff << 16 if lost
-        @row_ready = true
-      end
-
-      # Replay the line through the pixel sequencer, filling the code buffer
-      # from the X match on. A log of mid-line register writes makes the
-      # comparator and the shift register see the values each pixel was
-      # drawn with.
-      #
-      # The row can be shown once before the reload and once after it, so a
-      # sprite moved past the beam can fire a second time on the same line
-      # (spritex). A match inside the dead pixels shows nothing.
-      def sequence(log = nil)
-        @span = 0
-        @reload_span = 0
-        reload_bits = reload_row
-        return unless @row_ready || @prev_bits || reload_bits
-
-        log = nil if log.nil? || log.empty?
-        @stop_x = @dma ? nil : @timing.display_off_x
-        comparator_hits(log).each { |start| sequence_hit(log, start, reload_bits) }
-      end
-
-      # The color at a raster position, for a sprite sequenced with the
-      # registers as they stand.
-      def pixel(raster_x)
-        code = code_at(raster_x, @leftmost, @span, @codes) ||
-               code_at(raster_x, @reload_leftmost, @reload_span, @reload_codes)
-        return nil if code.nil? || code.zero?
-
-        palette(@registers, Array.new(4, 0))[code]
-      end
-
-      # Fill a four-entry lookup from latch code to color, against a view of
-      # the color registers.
-      def palette(view, into)
-        into[SHARED0] = view[0x25] & 0x0f
-        into[OWN_COLOR] = view[0x27 + index] & 0x0f
-        into[SHARED1] = view[0x26] & 0x0f
-        into
-      end
-
-      private
-
-      # On the line whose compare started the DMA, sprites 3-7 ran their
-      # s-accesses before it was on, so the shift register holds what the
-      # VIC saw on its bus instead of a row, and a hit from the display
-      # turning on shows it (sbsprf24).
-      def blind_fetch
-        @bits = @bus.row(index)
-        @row_ready = true
-        @show_from = @timing.display_off_x
-      end
-
-      def code_at(raster_x, leftmost, span, codes)
-        dist = raster_x - leftmost
-        dist += @width if dist.negative?
-        codes[dist] if dist < span
-      end
-
-      def sequence_hit(log, start, reload_bits)
-        return if (@stop_x && start >= @stop_x) || start < @show_from || start < @reload_x + RELOAD_DEAD - @width
-
-        if start < @reload_x
-          sequence_early(log, start)
-        elsif start >= @reload_x + RELOAD_DEAD
-          sequence_reloaded(log, start, reload_bits)
-        end
-      end
-
-      def sequence_early(log, start)
-        bits = early_row
-        return unless bits && @span.zero?
-
-        @leftmost = start
-        cut = reload_cut(start)
-        @span = cut_at_reload(cut, run(log, start, @codes, bits, cut), @codes)
-      end
-
-      def sequence_reloaded(log, start, bits)
-        return unless bits && @reload_span.zero?
-
-        @reload_leftmost = start
-        cut = reload_cut(start)
-        @reload_span = cut_at_reload(cut, run(log, start, @reload_codes, bits, cut), @reload_codes)
-      end
-
-      # The row in the shift register ahead of the reload: this line's for
-      # sprites 0-2, and for the others the one their reload at the start of
-      # the last line brought in.
-      def early_row = @reload_next_line ? current_row : @prev_bits
-
-      def current_row = (@bits if @row_ready)
-
-      # The row the reload brings in. Sprites 0-2 reload late in the line
-      # with the next line's row, so one that fires after it shows that row
-      # a line early (spritegap); the others reload at the start of the line
-      # with the row it already has.
-      def reload_row
-        return current_row unless @reload_next_line
-        return unless @dma && @display_on
-
-        bits = row_bits(@mc)
-        bits |= 0xff << 16 if @first_byte_lost
-        bits
-      end
-
-      # The three s-accesses step MC through the sprite's block, wrapping
-      # within it.
-      def row_bits(counter)
-        base = pointer * 64
-        (@bank.peek(base + counter) << 16) |
-          (@bank.peek(base + ((counter + 1) & MC_MASK)) << 8) |
-          @bank.peek(base + ((counter + 2) & MC_MASK))
-      end
-
-      def pointer = @bank.peek(@registers.screen_base + 0x3f8 + index)
-    end
-  end
-end