therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/2.3.3/tools/oprofile/report

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# Source common stuff.
-. `cd $(dirname "$0");pwd`/common
-
-opreport --symbols --session-dir="$OPROFILE_SESSION_DIR" "$shell_exec" "$@"
-

data/ext/v8/upstream/2.3.3/tools/oprofile/reset

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# Source common stuff.
-. `cd $(dirname "$0");pwd`/common
-
-sudo_opcontrol --reset "$@"
-

data/ext/v8/upstream/2.3.3/tools/oprofile/run

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-# Source common stuff.
-. `cd $(dirname "$0");pwd`/common
-
-# Reset oprofile samples.
-sudo_opcontrol --reset
-
-# Run the executable to profile with the correct arguments.
-"$shell_exec" --oprofile "$@"
-
-# Flush oprofile data including the generated code into ELF binaries.
-sudo_opcontrol --dump
-

data/ext/v8/upstream/2.3.3/tools/oprofile/shutdown

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# Source common stuff.
-. `cd $(dirname "$0");pwd`/common
-
-sudo_opcontrol --shutdown "$@"
-

data/ext/v8/upstream/2.3.3/tools/oprofile/start

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# Source common stuff.
-. `cd $(dirname "$0");pwd`/common
-
-sudo_opcontrol --start --no-vmlinux "$@"
-

data/ext/v8/upstream/2.3.3/tools/presubmit.py

@@ -1,299 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2008 the V8 project authors. All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-#       copyright notice, this list of conditions and the following
-#       disclaimer in the documentation and/or other materials provided
-#       with the distribution.
-#     * Neither the name of Google Inc. nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-import md5
-import optparse
-import os
-from os.path import abspath, join, dirname, basename, exists
-import pickle
-import re
-import sys
-import subprocess
-
-# Disabled LINT rules and reason.
-# build/include_what_you_use: Started giving false positives for variables
-#  named "string" and "map" assuming that you needed to include STL headers.
-
-ENABLED_LINT_RULES = """
-build/class
-build/deprecated
-build/endif_comment
-build/forward_decl
-build/include_order
-build/printf_format
-build/storage_class
-legal/copyright
-readability/boost
-readability/braces
-readability/casting
-readability/check
-readability/constructors
-readability/fn_size
-readability/function
-readability/multiline_comment
-readability/multiline_string
-readability/streams
-readability/todo
-readability/utf8
-runtime/arrays
-runtime/casting
-runtime/deprecated_fn
-runtime/explicit
-runtime/int
-runtime/memset
-runtime/mutex
-runtime/nonconf
-runtime/printf
-runtime/printf_format
-runtime/references
-runtime/rtti
-runtime/sizeof
-runtime/string
-runtime/virtual
-runtime/vlog
-whitespace/blank_line
-whitespace/braces
-whitespace/comma
-whitespace/comments
-whitespace/end_of_line
-whitespace/ending_newline
-whitespace/indent
-whitespace/labels
-whitespace/line_length
-whitespace/newline
-whitespace/operators
-whitespace/parens
-whitespace/tab
-whitespace/todo
-""".split()
-
-
-class FileContentsCache(object):
-
-  def __init__(self, sums_file_name):
-    self.sums = {}
-    self.sums_file_name = sums_file_name
-
-  def Load(self):
-    try:
-      sums_file = None
-      try:
-        sums_file = open(self.sums_file_name, 'r')
-        self.sums = pickle.load(sums_file)
-      except IOError:
-        # File might not exist, this is OK.
-        pass
-    finally:
-      if sums_file:
-        sums_file.close()
-
-  def Save(self):
-    try:
-      sums_file = open(self.sums_file_name, 'w')
-      pickle.dump(self.sums, sums_file)
-    finally:
-      sums_file.close()
-
-  def FilterUnchangedFiles(self, files):
-    changed_or_new = []
-    for file in files:
-      try:
-        handle = open(file, "r")
-        file_sum = md5.new(handle.read()).digest()
-        if not file in self.sums or self.sums[file] != file_sum:
-          changed_or_new.append(file)
-          self.sums[file] = file_sum
-      finally:
-        handle.close()
-    return changed_or_new
-
-  def RemoveFile(self, file):
-    if file in self.sums:
-      self.sums.pop(file)
-
-
-class SourceFileProcessor(object):
-  """
-  Utility class that can run through a directory structure, find all relevant
-  files and invoke a custom check on the files.
-  """
-
-  def Run(self, path):
-    all_files = []
-    for file in self.GetPathsToSearch():
-      all_files += self.FindFilesIn(join(path, file))
-    if not self.ProcessFiles(all_files, path):
-      return False
-    return True
-
-  def IgnoreDir(self, name):
-    return name.startswith('.') or name == 'data' or name == 'sputniktests'
-
-  def IgnoreFile(self, name):
-    return name.startswith('.')
-
-  def FindFilesIn(self, path):
-    result = []
-    for (root, dirs, files) in os.walk(path):
-      for ignored in [x for x in dirs if self.IgnoreDir(x)]:
-        dirs.remove(ignored)
-      for file in files:
-        if not self.IgnoreFile(file) and self.IsRelevant(file):
-          result.append(join(root, file))
-    return result
-
-
-class CppLintProcessor(SourceFileProcessor):
-  """
-  Lint files to check that they follow the google code style.
-  """
-
-  def IsRelevant(self, name):
-    return name.endswith('.cc') or name.endswith('.h')
-
-  def IgnoreDir(self, name):
-    return (super(CppLintProcessor, self).IgnoreDir(name)
-              or (name == 'third_party'))
-
-  IGNORE_LINT = ['flag-definitions.h']
-
-  def IgnoreFile(self, name):
-    return (super(CppLintProcessor, self).IgnoreFile(name)
-              or (name in CppLintProcessor.IGNORE_LINT))
-
-  def GetPathsToSearch(self):
-    return ['src', 'public', 'samples', join('test', 'cctest')]
-
-  def ProcessFiles(self, files, path):
-    good_files_cache = FileContentsCache('.cpplint-cache')
-    good_files_cache.Load()
-    files = good_files_cache.FilterUnchangedFiles(files)
-    if len(files) == 0:
-      print 'No changes in files detected. Skipping cpplint check.'
-      return True
-
-    filt = '-,' + ",".join(['+' + n for n in ENABLED_LINT_RULES])
-    command = ['cpplint.py', '--filter', filt] + join(files)
-    local_cpplint = join(path, "tools", "cpplint.py")
-    if exists(local_cpplint):
-      command = ['python', local_cpplint, '--filter', filt] + join(files)
-
-    process = subprocess.Popen(command, stderr=subprocess.PIPE)
-    LINT_ERROR_PATTERN = re.compile(r'^(.+)[:(]\d+[:)]')
-    while True:
-      out_line = process.stderr.readline()
-      if out_line == '' and process.poll() != None:
-        break
-      sys.stderr.write(out_line)
-      m = LINT_ERROR_PATTERN.match(out_line)
-      if m:
-        good_files_cache.RemoveFile(m.group(1))
-
-    good_files_cache.Save()
-    return process.returncode == 0
-
-
-COPYRIGHT_HEADER_PATTERN = re.compile(
-    r'Copyright [\d-]*20[0-1][0-9] the V8 project authors. All rights reserved.')
-
-class SourceProcessor(SourceFileProcessor):
-  """
-  Check that all files include a copyright notice.
-  """
-
-  RELEVANT_EXTENSIONS = ['.js', '.cc', '.h', '.py', '.c', 'SConscript',
-      'SConstruct', '.status']
-  def IsRelevant(self, name):
-    for ext in SourceProcessor.RELEVANT_EXTENSIONS:
-      if name.endswith(ext):
-        return True
-    return False
-
-  def GetPathsToSearch(self):
-    return ['.']
-
-  def IgnoreDir(self, name):
-    return (super(SourceProcessor, self).IgnoreDir(name)
-              or (name == 'third_party')
-              or (name == 'obj'))
-
-  IGNORE_COPYRIGHTS = ['earley-boyer.js', 'raytrace.js', 'crypto.js',
-      'libraries.cc', 'libraries-empty.cc', 'jsmin.py', 'regexp-pcre.js']
-  IGNORE_TABS = IGNORE_COPYRIGHTS + ['unicode-test.js',
-      'html-comments.js']
-
-  def ProcessContents(self, name, contents):
-    result = True
-    base = basename(name)
-    if not base in SourceProcessor.IGNORE_TABS:
-      if '\t' in contents:
-        print "%s contains tabs" % name
-        result = False
-    if not base in SourceProcessor.IGNORE_COPYRIGHTS:
-      if not COPYRIGHT_HEADER_PATTERN.search(contents):
-        print "%s is missing a correct copyright header." % name
-        result = False
-    return result
-
-  def ProcessFiles(self, files, path):
-    success = True
-    for file in files:
-      try:
-        handle = open(file)
-        contents = handle.read()
-        success = self.ProcessContents(file, contents) and success
-      finally:
-        handle.close()
-    return success
-
-
-def GetOptions():
-  result = optparse.OptionParser()
-  result.add_option('--no-lint', help="Do not run cpplint", default=False,
-                    action="store_true")
-  return result
-
-
-def Main():
-  workspace = abspath(join(dirname(sys.argv[0]), '..'))
-  parser = GetOptions()
-  (options, args) = parser.parse_args()
-  success = True
-  if not options.no_lint:
-    success = CppLintProcessor().Run(workspace) and success
-  success = SourceProcessor().Run(workspace) and success
-  if success:
-    return 0
-  else:
-    return 1
-
-
-if __name__ == '__main__':
-  sys.exit(Main())

data/ext/v8/upstream/2.3.3/tools/profile.js

@@ -1,691 +0,0 @@
-// Copyright 2009 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-// Initlialize namespaces
-var devtools = devtools || {};
-devtools.profiler = devtools.profiler || {};
-
-
-/**
- * Creates a profile object for processing profiling-related events
- * and calculating function execution times.
- *
- * @constructor
- */
-devtools.profiler.Profile = function() {
-  this.codeMap_ = new devtools.profiler.CodeMap();
-  this.topDownTree_ = new devtools.profiler.CallTree();
-  this.bottomUpTree_ = new devtools.profiler.CallTree();
-};
-
-/**
- * Version of profiler log.
- */
-devtools.profiler.Profile.VERSION = 2;
-
-
-/**
- * Returns whether a function with the specified name must be skipped.
- * Should be overriden by subclasses.
- *
- * @param {string} name Function name.
- */
-devtools.profiler.Profile.prototype.skipThisFunction = function(name) {
-  return false;
-};
-
-
-/**
- * Enum for profiler operations that involve looking up existing
- * code entries.
- *
- * @enum {number}
- */
-devtools.profiler.Profile.Operation = {
-  MOVE: 0,
-  DELETE: 1,
-  TICK: 2
-};
-
-
-/**
- * Called whenever the specified operation has failed finding a function
- * containing the specified address. Should be overriden by subclasses.
- * See the devtools.profiler.Profile.Operation enum for the list of
- * possible operations.
- *
- * @param {number} operation Operation.
- * @param {number} addr Address of the unknown code.
- * @param {number} opt_stackPos If an unknown address is encountered
- *     during stack strace processing, specifies a position of the frame
- *     containing the address.
- */
-devtools.profiler.Profile.prototype.handleUnknownCode = function(
-    operation, addr, opt_stackPos) {
-};
-
-
-/**
- * Registers a library.
- *
- * @param {string} name Code entry name.
- * @param {number} startAddr Starting address.
- * @param {number} endAddr Ending address.
- */
-devtools.profiler.Profile.prototype.addLibrary = function(
-    name, startAddr, endAddr) {
-  var entry = new devtools.profiler.CodeMap.CodeEntry(
-      endAddr - startAddr, name);
-  this.codeMap_.addLibrary(startAddr, entry);
-  return entry;
-};
-
-
-/**
- * Registers statically compiled code entry.
- *
- * @param {string} name Code entry name.
- * @param {number} startAddr Starting address.
- * @param {number} endAddr Ending address.
- */
-devtools.profiler.Profile.prototype.addStaticCode = function(
-    name, startAddr, endAddr) {
-  var entry = new devtools.profiler.CodeMap.CodeEntry(
-      endAddr - startAddr, name);
-  this.codeMap_.addStaticCode(startAddr, entry);
-  return entry;
-};
-
-
-/**
- * Registers dynamic (JIT-compiled) code entry.
- *
- * @param {string} type Code entry type.
- * @param {string} name Code entry name.
- * @param {number} start Starting address.
- * @param {number} size Code entry size.
- */
-devtools.profiler.Profile.prototype.addCode = function(
-    type, name, start, size) {
-  var entry = new devtools.profiler.Profile.DynamicCodeEntry(size, type, name);
-  this.codeMap_.addCode(start, entry);
-  return entry;
-};
-
-
-/**
- * Creates an alias entry for a code entry.
- *
- * @param {number} aliasAddr Alias address.
- * @param {number} addr Code entry address.
- */
-devtools.profiler.Profile.prototype.addCodeAlias = function(
-    aliasAddr, addr) {
-  var entry = this.codeMap_.findDynamicEntryByStartAddress(addr);
-  if (entry) {
-    this.codeMap_.addCode(aliasAddr, entry);
-  }
-};
-
-
-/**
- * Reports about moving of a dynamic code entry.
- *
- * @param {number} from Current code entry address.
- * @param {number} to New code entry address.
- */
-devtools.profiler.Profile.prototype.moveCode = function(from, to) {
-  try {
-    this.codeMap_.moveCode(from, to);
-  } catch (e) {
-    this.handleUnknownCode(devtools.profiler.Profile.Operation.MOVE, from);
-  }
-};
-
-
-/**
- * Reports about deletion of a dynamic code entry.
- *
- * @param {number} start Starting address.
- */
-devtools.profiler.Profile.prototype.deleteCode = function(start) {
-  try {
-    this.codeMap_.deleteCode(start);
-  } catch (e) {
-    this.handleUnknownCode(devtools.profiler.Profile.Operation.DELETE, start);
-  }
-};
-
-
-/**
- * Reports about moving of a dynamic code entry.
- *
- * @param {number} from Current code entry address.
- * @param {number} to New code entry address.
- */
-devtools.profiler.Profile.prototype.safeMoveDynamicCode = function(from, to) {
-  if (this.codeMap_.findDynamicEntryByStartAddress(from)) {
-    this.codeMap_.moveCode(from, to);
-  }
-};
-
-
-/**
- * Reports about deletion of a dynamic code entry.
- *
- * @param {number} start Starting address.
- */
-devtools.profiler.Profile.prototype.safeDeleteDynamicCode = function(start) {
-  if (this.codeMap_.findDynamicEntryByStartAddress(start)) {
-    this.codeMap_.deleteCode(start);
-  }
-};
-
-
-/**
- * Retrieves a code entry by an address.
- *
- * @param {number} addr Entry address.
- */
-devtools.profiler.Profile.prototype.findEntry = function(addr) {
-  return this.codeMap_.findEntry(addr);
-};
-
-
-/**
- * Records a tick event. Stack must contain a sequence of
- * addresses starting with the program counter value.
- *
- * @param {Array<number>} stack Stack sample.
- */
-devtools.profiler.Profile.prototype.recordTick = function(stack) {
-  var processedStack = this.resolveAndFilterFuncs_(stack);
-  this.bottomUpTree_.addPath(processedStack);
-  processedStack.reverse();
-  this.topDownTree_.addPath(processedStack);
-};
-
-
-/**
- * Translates addresses into function names and filters unneeded
- * functions.
- *
- * @param {Array<number>} stack Stack sample.
- */
-devtools.profiler.Profile.prototype.resolveAndFilterFuncs_ = function(stack) {
-  var result = [];
-  for (var i = 0; i < stack.length; ++i) {
-    var entry = this.codeMap_.findEntry(stack[i]);
-    if (entry) {
-      var name = entry.getName();
-      if (!this.skipThisFunction(name)) {
-        result.push(name);
-      }
-    } else {
-      this.handleUnknownCode(
-          devtools.profiler.Profile.Operation.TICK, stack[i], i);
-    }
-  }
-  return result;
-};
-
-
-/**
- * Performs a BF traversal of the top down call graph.
- *
- * @param {function(devtools.profiler.CallTree.Node)} f Visitor function.
- */
-devtools.profiler.Profile.prototype.traverseTopDownTree = function(f) {
-  this.topDownTree_.traverse(f);
-};
-
-
-/**
- * Performs a BF traversal of the bottom up call graph.
- *
- * @param {function(devtools.profiler.CallTree.Node)} f Visitor function.
- */
-devtools.profiler.Profile.prototype.traverseBottomUpTree = function(f) {
-  this.bottomUpTree_.traverse(f);
-};
-
-
-/**
- * Calculates a top down profile for a node with the specified label.
- * If no name specified, returns the whole top down calls tree.
- *
- * @param {string} opt_label Node label.
- */
-devtools.profiler.Profile.prototype.getTopDownProfile = function(opt_label) {
-  return this.getTreeProfile_(this.topDownTree_, opt_label);
-};
-
-
-/**
- * Calculates a bottom up profile for a node with the specified label.
- * If no name specified, returns the whole bottom up calls tree.
- *
- * @param {string} opt_label Node label.
- */
-devtools.profiler.Profile.prototype.getBottomUpProfile = function(opt_label) {
-  return this.getTreeProfile_(this.bottomUpTree_, opt_label);
-};
-
-
-/**
- * Helper function for calculating a tree profile.
- *
- * @param {devtools.profiler.Profile.CallTree} tree Call tree.
- * @param {string} opt_label Node label.
- */
-devtools.profiler.Profile.prototype.getTreeProfile_ = function(tree, opt_label) {
-  if (!opt_label) {
-    tree.computeTotalWeights();
-    return tree;
-  } else {
-    var subTree = tree.cloneSubtree(opt_label);
-    subTree.computeTotalWeights();
-    return subTree;
-  }
-};
-
-
-/**
- * Calculates a flat profile of callees starting from a node with
- * the specified label. If no name specified, starts from the root.
- *
- * @param {string} opt_label Starting node label.
- */
-devtools.profiler.Profile.prototype.getFlatProfile = function(opt_label) {
-  var counters = new devtools.profiler.CallTree();
-  var rootLabel = opt_label || devtools.profiler.CallTree.ROOT_NODE_LABEL;
-  var precs = {};
-  precs[rootLabel] = 0;
-  var root = counters.findOrAddChild(rootLabel);
-
-  this.topDownTree_.computeTotalWeights();
-  this.topDownTree_.traverseInDepth(
-    function onEnter(node) {
-      if (!(node.label in precs)) {
-        precs[node.label] = 0;
-      }
-      var nodeLabelIsRootLabel = node.label == rootLabel;
-      if (nodeLabelIsRootLabel || precs[rootLabel] > 0) {
-        if (precs[rootLabel] == 0) {
-          root.selfWeight += node.selfWeight;
-          root.totalWeight += node.totalWeight;
-        } else {
-          var rec = root.findOrAddChild(node.label);
-          rec.selfWeight += node.selfWeight;
-          if (nodeLabelIsRootLabel || precs[node.label] == 0) {
-            rec.totalWeight += node.totalWeight;
-          }
-        }
-        precs[node.label]++;
-      }
-    },
-    function onExit(node) {
-      if (node.label == rootLabel || precs[rootLabel] > 0) {
-        precs[node.label]--;
-      }
-    },
-    null);
-
-  if (!opt_label) {
-    // If we have created a flat profile for the whole program, we don't
-    // need an explicit root in it. Thus, replace the counters tree
-    // root with the node corresponding to the whole program.
-    counters.root_ = root;
-  } else {
-    // Propagate weights so percents can be calculated correctly.
-    counters.getRoot().selfWeight = root.selfWeight;
-    counters.getRoot().totalWeight = root.totalWeight;
-  }
-  return counters;
-};
-
-
-/**
- * Creates a dynamic code entry.
- *
- * @param {number} size Code size.
- * @param {string} type Code type.
- * @param {string} name Function name.
- * @constructor
- */
-devtools.profiler.Profile.DynamicCodeEntry = function(size, type, name) {
-  devtools.profiler.CodeMap.CodeEntry.call(this, size, name);
-  this.type = type;
-};
-
-
-/**
- * Returns node name.
- */
-devtools.profiler.Profile.DynamicCodeEntry.prototype.getName = function() {
-  var name = this.name;
-  if (name.length == 0) {
-    name = '<anonymous>';
-  } else if (name.charAt(0) == ' ') {
-    // An anonymous function with location: " aaa.js:10".
-    name = '<anonymous>' + name;
-  }
-  return this.type + ': ' + name;
-};
-
-
-/**
- * Returns raw node name (without type decoration).
- */
-devtools.profiler.Profile.DynamicCodeEntry.prototype.getRawName = function() {
-  return this.name;
-};
-
-
-devtools.profiler.Profile.DynamicCodeEntry.prototype.isJSFunction = function() {
-  return this.type == "Function" ||
-    this.type == "LazyCompile" ||
-    this.type == "Script";
-};
-
-
-/**
- * Constructs a call graph.
- *
- * @constructor
- */
-devtools.profiler.CallTree = function() {
-  this.root_ = new devtools.profiler.CallTree.Node(
-      devtools.profiler.CallTree.ROOT_NODE_LABEL);
-};
-
-
-/**
- * The label of the root node.
- */
-devtools.profiler.CallTree.ROOT_NODE_LABEL = '';
-
-
-/**
- * @private
- */
-devtools.profiler.CallTree.prototype.totalsComputed_ = false;
-
-
-/**
- * Returns the tree root.
- */
-devtools.profiler.CallTree.prototype.getRoot = function() {
-  return this.root_;
-};
-
-
-/**
- * Adds the specified call path, constructing nodes as necessary.
- *
- * @param {Array<string>} path Call path.
- */
-devtools.profiler.CallTree.prototype.addPath = function(path) {
-  if (path.length == 0) {
-    return;
-  }
-  var curr = this.root_;
-  for (var i = 0; i < path.length; ++i) {
-    curr = curr.findOrAddChild(path[i]);
-  }
-  curr.selfWeight++;
-  this.totalsComputed_ = false;
-};
-
-
-/**
- * Finds an immediate child of the specified parent with the specified
- * label, creates a child node if necessary. If a parent node isn't
- * specified, uses tree root.
- *
- * @param {string} label Child node label.
- */
-devtools.profiler.CallTree.prototype.findOrAddChild = function(label) {
-  return this.root_.findOrAddChild(label);
-};
-
-
-/**
- * Creates a subtree by cloning and merging all subtrees rooted at nodes
- * with a given label. E.g. cloning the following call tree on label 'A'
- * will give the following result:
- *
- *           <A>--<B>                                     <B>
- *          /                                            /
- *     <root>             == clone on 'A' ==>  <root>--<A>
- *          \                                            \
- *           <C>--<A>--<D>                                <D>
- *
- * And <A>'s selfWeight will be the sum of selfWeights of <A>'s from the
- * source call tree.
- *
- * @param {string} label The label of the new root node.
- */
-devtools.profiler.CallTree.prototype.cloneSubtree = function(label) {
-  var subTree = new devtools.profiler.CallTree();
-  this.traverse(function(node, parent) {
-    if (!parent && node.label != label) {
-      return null;
-    }
-    var child = (parent ? parent : subTree).findOrAddChild(node.label);
-    child.selfWeight += node.selfWeight;
-    return child;
-  });
-  return subTree;
-};
-
-
-/**
- * Computes total weights in the call graph.
- */
-devtools.profiler.CallTree.prototype.computeTotalWeights = function() {
-  if (this.totalsComputed_) {
-    return;
-  }
-  this.root_.computeTotalWeight();
-  this.totalsComputed_ = true;
-};
-
-
-/**
- * Traverses the call graph in preorder. This function can be used for
- * building optionally modified tree clones. This is the boilerplate code
- * for this scenario:
- *
- * callTree.traverse(function(node, parentClone) {
- *   var nodeClone = cloneNode(node);
- *   if (parentClone)
- *     parentClone.addChild(nodeClone);
- *   return nodeClone;
- * });
- *
- * @param {function(devtools.profiler.CallTree.Node, *)} f Visitor function.
- *    The second parameter is the result of calling 'f' on the parent node.
- */
-devtools.profiler.CallTree.prototype.traverse = function(f) {
-  var pairsToProcess = new ConsArray();
-  pairsToProcess.concat([{node: this.root_, param: null}]);
-  while (!pairsToProcess.atEnd()) {
-    var pair = pairsToProcess.next();
-    var node = pair.node;
-    var newParam = f(node, pair.param);
-    var morePairsToProcess = [];
-    node.forEachChild(function (child) {
-        morePairsToProcess.push({node: child, param: newParam}); });
-    pairsToProcess.concat(morePairsToProcess);
-  }
-};
-
-
-/**
- * Performs an indepth call graph traversal.
- *
- * @param {function(devtools.profiler.CallTree.Node)} enter A function called
- *     prior to visiting node's children.
- * @param {function(devtools.profiler.CallTree.Node)} exit A function called
- *     after visiting node's children.
- */
-devtools.profiler.CallTree.prototype.traverseInDepth = function(enter, exit) {
-  function traverse(node) {
-    enter(node);
-    node.forEachChild(traverse);
-    exit(node);
-  }
-  traverse(this.root_);
-};
-
-
-/**
- * Constructs a call graph node.
- *
- * @param {string} label Node label.
- * @param {devtools.profiler.CallTree.Node} opt_parent Node parent.
- */
-devtools.profiler.CallTree.Node = function(label, opt_parent) {
-  this.label = label;
-  this.parent = opt_parent;
-  this.children = {};
-};
-
-
-/**
- * Node self weight (how many times this node was the last node in
- * a call path).
- * @type {number}
- */
-devtools.profiler.CallTree.Node.prototype.selfWeight = 0;
-
-
-/**
- * Node total weight (includes weights of all children).
- * @type {number}
- */
-devtools.profiler.CallTree.Node.prototype.totalWeight = 0;
-
-
-/**
- * Adds a child node.
- *
- * @param {string} label Child node label.
- */
-devtools.profiler.CallTree.Node.prototype.addChild = function(label) {
-  var child = new devtools.profiler.CallTree.Node(label, this);
-  this.children[label] = child;
-  return child;
-};
-
-
-/**
- * Computes node's total weight.
- */
-devtools.profiler.CallTree.Node.prototype.computeTotalWeight =
-    function() {
-  var totalWeight = this.selfWeight;
-  this.forEachChild(function(child) {
-      totalWeight += child.computeTotalWeight(); });
-  return this.totalWeight = totalWeight;
-};
-
-
-/**
- * Returns all node's children as an array.
- */
-devtools.profiler.CallTree.Node.prototype.exportChildren = function() {
-  var result = [];
-  this.forEachChild(function (node) { result.push(node); });
-  return result;
-};
-
-
-/**
- * Finds an immediate child with the specified label.
- *
- * @param {string} label Child node label.
- */
-devtools.profiler.CallTree.Node.prototype.findChild = function(label) {
-  return this.children[label] || null;
-};
-
-
-/**
- * Finds an immediate child with the specified label, creates a child
- * node if necessary.
- *
- * @param {string} label Child node label.
- */
-devtools.profiler.CallTree.Node.prototype.findOrAddChild = function(label) {
-  return this.findChild(label) || this.addChild(label);
-};
-
-
-/**
- * Calls the specified function for every child.
- *
- * @param {function(devtools.profiler.CallTree.Node)} f Visitor function.
- */
-devtools.profiler.CallTree.Node.prototype.forEachChild = function(f) {
-  for (var c in this.children) {
-    f(this.children[c]);
-  }
-};
-
-
-/**
- * Walks up from the current node up to the call tree root.
- *
- * @param {function(devtools.profiler.CallTree.Node)} f Visitor function.
- */
-devtools.profiler.CallTree.Node.prototype.walkUpToRoot = function(f) {
-  for (var curr = this; curr != null; curr = curr.parent) {
-    f(curr);
-  }
-};
-
-
-/**
- * Tries to find a node with the specified path.
- *
- * @param {Array<string>} labels The path.
- * @param {function(devtools.profiler.CallTree.Node)} opt_f Visitor function.
- */
-devtools.profiler.CallTree.Node.prototype.descendToChild = function(
-    labels, opt_f) {
-  for (var pos = 0, curr = this; pos < labels.length && curr != null; pos++) {
-    var child = curr.findChild(labels[pos]);
-    if (opt_f) {
-      opt_f(child, pos);
-    }
-    curr = child;
-  }
-  return curr;
-};