therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/2.3.3/include/v8-debug.h

@@ -1,381 +0,0 @@
-// Copyright 2008 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#ifndef V8_V8_DEBUG_H_
-#define V8_V8_DEBUG_H_
-
-#include "v8.h"
-
-#ifdef _WIN32
-typedef int int32_t;
-typedef unsigned int uint32_t;
-typedef unsigned short uint16_t;  // NOLINT
-typedef long long int64_t;  // NOLINT
-
-// Setup for Windows DLL export/import. See v8.h in this directory for
-// information on how to build/use V8 as a DLL.
-#if defined(BUILDING_V8_SHARED) && defined(USING_V8_SHARED)
-#error both BUILDING_V8_SHARED and USING_V8_SHARED are set - please check the\
-  build configuration to ensure that at most one of these is set
-#endif
-
-#ifdef BUILDING_V8_SHARED
-#define EXPORT __declspec(dllexport)
-#elif USING_V8_SHARED
-#define EXPORT __declspec(dllimport)
-#else
-#define EXPORT
-#endif
-
-#else  // _WIN32
-
-// Setup for Linux shared library export. See v8.h in this directory for
-// information on how to build/use V8 as shared library.
-#if defined(__GNUC__) && (__GNUC__ >= 4) && defined(V8_SHARED)
-#define EXPORT __attribute__ ((visibility("default")))
-#else  // defined(__GNUC__) && (__GNUC__ >= 4)
-#define EXPORT
-#endif  // defined(__GNUC__) && (__GNUC__ >= 4)
-
-#endif  // _WIN32
-
-
-/**
- * Debugger support for the V8 JavaScript engine.
- */
-namespace v8 {
-
-// Debug events which can occur in the V8 JavaScript engine.
-enum DebugEvent {
-  Break = 1,
-  Exception = 2,
-  NewFunction = 3,
-  BeforeCompile = 4,
-  AfterCompile  = 5,
-  ScriptCollected = 6,
-  BreakForCommand = 7
-};
-
-
-class EXPORT Debug {
- public:
-  /**
-   * A client object passed to the v8 debugger whose ownership will be taken by
-   * it. v8 is always responsible for deleting the object.
-   */
-  class ClientData {
-   public:
-    virtual ~ClientData() {}
-  };
-
-
-  /**
-   * A message object passed to the debug message handler.
-   */
-  class Message {
-   public:
-    /**
-     * Check type of message.
-     */
-    virtual bool IsEvent() const = 0;
-    virtual bool IsResponse() const = 0;
-    virtual DebugEvent GetEvent() const = 0;
-
-    /**
-     * Indicate whether this is a response to a continue command which will
-     * start the VM running after this is processed.
-     */
-    virtual bool WillStartRunning() const = 0;
-
-    /**
-     * Access to execution state and event data. Don't store these cross
-     * callbacks as their content becomes invalid. These objects are from the
-     * debugger event that started the debug message loop.
-     */
-    virtual Handle<Object> GetExecutionState() const = 0;
-    virtual Handle<Object> GetEventData() const = 0;
-
-    /**
-     * Get the debugger protocol JSON.
-     */
-    virtual Handle<String> GetJSON() const = 0;
-
-    /**
-     * Get the context active when the debug event happened. Note this is not
-     * the current active context as the JavaScript part of the debugger is
-     * running in it's own context which is entered at this point.
-     */
-    virtual Handle<Context> GetEventContext() const = 0;
-
-    /**
-     * Client data passed with the corresponding request if any. This is the
-     * client_data data value passed into Debug::SendCommand along with the
-     * request that led to the message or NULL if the message is an event. The
-     * debugger takes ownership of the data and will delete it even if there is
-     * no message handler.
-     */
-    virtual ClientData* GetClientData() const = 0;
-
-    virtual ~Message() {}
-  };
-  
-
-  /**
-   * An event details object passed to the debug event listener.
-   */
-  class EventDetails {
-   public:
-    /**
-     * Event type.
-     */
-    virtual DebugEvent GetEvent() const = 0;
-
-    /**
-     * Access to execution state and event data of the debug event. Don't store
-     * these cross callbacks as their content becomes invalid.
-     */
-    virtual Handle<Object> GetExecutionState() const = 0;
-    virtual Handle<Object> GetEventData() const = 0;
-
-    /**
-     * Get the context active when the debug event happened. Note this is not
-     * the current active context as the JavaScript part of the debugger is
-     * running in it's own context which is entered at this point.
-     */
-    virtual Handle<Context> GetEventContext() const = 0;
-
-    /**
-     * Client data passed with the corresponding callbak whet it was registered.
-     */
-    virtual Handle<Value> GetCallbackData() const = 0;
-
-    /**
-     * Client data passed to DebugBreakForCommand function. The
-     * debugger takes ownership of the data and will delete it even if
-     * there is no message handler.
-     */
-    virtual ClientData* GetClientData() const = 0;
-
-    virtual ~EventDetails() {}
-  };
-
-
-  /**
-   * Debug event callback function.
-   *
-   * \param event the type of the debug event that triggered the callback
-   *   (enum DebugEvent)
-   * \param exec_state execution state (JavaScript object)
-   * \param event_data event specific data (JavaScript object)
-   * \param data value passed by the user to SetDebugEventListener
-   */
-  typedef void (*EventCallback)(DebugEvent event,
-                                Handle<Object> exec_state,
-                                Handle<Object> event_data,
-                                Handle<Value> data);
-
-  /**
-   * Debug event callback function.
-   *
-   * \param event_details object providing information about the debug event
-   *
-   * A EventCallback2 does not take possession of the event data,
-   * and must not rely on the data persisting after the handler returns.
-   */
-  typedef void (*EventCallback2)(const EventDetails& event_details);
-
-  /**
-   * Debug message callback function.
-   *
-   * \param message the debug message handler message object
-   * \param length length of the message
-   * \param client_data the data value passed when registering the message handler
-
-   * A MessageHandler does not take possession of the message string,
-   * and must not rely on the data persisting after the handler returns.
-   *
-   * This message handler is deprecated. Use MessageHandler2 instead.
-   */
-  typedef void (*MessageHandler)(const uint16_t* message, int length,
-                                 ClientData* client_data);
-
-  /**
-   * Debug message callback function.
-   *
-   * \param message the debug message handler message object
-
-   * A MessageHandler does not take possession of the message data,
-   * and must not rely on the data persisting after the handler returns.
-   */
-  typedef void (*MessageHandler2)(const Message& message);
-
-  /**
-   * Debug host dispatch callback function.
-   */
-  typedef void (*HostDispatchHandler)();
-
-  /**
-   * Callback function for the host to ensure debug messages are processed.
-   */
-  typedef void (*DebugMessageDispatchHandler)();
-
-  // Set a C debug event listener.
-  static bool SetDebugEventListener(EventCallback that,
-                                    Handle<Value> data = Handle<Value>());
-  static bool SetDebugEventListener2(EventCallback2 that,
-                                     Handle<Value> data = Handle<Value>());
-
-  // Set a JavaScript debug event listener.
-  static bool SetDebugEventListener(v8::Handle<v8::Object> that,
-                                    Handle<Value> data = Handle<Value>());
-
-  // Break execution of JavaScript.
-  static void DebugBreak();
-
-  // Break execution of JavaScript (this method can be invoked from a
-  // non-VM thread) for further client command execution on a VM
-  // thread. Client data is then passed in EventDetails to
-  // EventCallback at the moment when the VM actually stops.
-  static void DebugBreakForCommand(ClientData* data = NULL);
-
-  // Message based interface. The message protocol is JSON. NOTE the message
-  // handler thread is not supported any more parameter must be false.
-  static void SetMessageHandler(MessageHandler handler,
-                                bool message_handler_thread = false);
-  static void SetMessageHandler2(MessageHandler2 handler);
-  static void SendCommand(const uint16_t* command, int length,
-                          ClientData* client_data = NULL);
-
-  // Dispatch interface.
-  static void SetHostDispatchHandler(HostDispatchHandler handler,
-                                     int period = 100);
-
-  /**
-   * Register a callback function to be called when a debug message has been
-   * received and is ready to be processed. For the debug messages to be
-   * processed V8 needs to be entered, and in certain embedding scenarios this
-   * callback can be used to make sure V8 is entered for the debug message to
-   * be processed. Note that debug messages will only be processed if there is
-   * a V8 break. This can happen automatically by using the option
-   * --debugger-auto-break.
-   * \param provide_locker requires that V8 acquires v8::Locker for you before
-   *        calling handler
-   */
-  static void SetDebugMessageDispatchHandler(
-      DebugMessageDispatchHandler handler, bool provide_locker = false);
-
- /**
-  * Run a JavaScript function in the debugger.
-  * \param fun the function to call
-  * \param data passed as second argument to the function
-  * With this call the debugger is entered and the function specified is called
-  * with the execution state as the first argument. This makes it possible to
-  * get access to information otherwise not available during normal JavaScript
-  * execution e.g. details on stack frames. Receiver of the function call will
-  * be the debugger context global object, however this is a subject to change.
-  * The following example show a JavaScript function which when passed to 
-  * v8::Debug::Call will return the current line of JavaScript execution.
-  *
-  * \code
-  *   function frame_source_line(exec_state) {
-  *     return exec_state.frame(0).sourceLine();
-  *   }
-  * \endcode
-  */
-  static Local<Value> Call(v8::Handle<v8::Function> fun,
-                            Handle<Value> data = Handle<Value>());
-
-  /**
-   * Returns a mirror object for the given object.
-   */
-  static Local<Value> GetMirror(v8::Handle<v8::Value> obj);
-
- /**
-  * Enable the V8 builtin debug agent. The debugger agent will listen on the
-  * supplied TCP/IP port for remote debugger connection.
-  * \param name the name of the embedding application
-  * \param port the TCP/IP port to listen on
-  * \param wait_for_connection whether V8 should pause on a first statement
-  *   allowing remote debugger to connect before anything interesting happened
-  */
-  static bool EnableAgent(const char* name, int port,
-                          bool wait_for_connection = false);
-
-  /**
-   * Makes V8 process all pending debug messages.
-   *
-   * From V8 point of view all debug messages come asynchronously (e.g. from
-   * remote debugger) but they all must be handled synchronously: V8 cannot
-   * do 2 things at one time so normal script execution must be interrupted
-   * for a while.
-   *
-   * Generally when message arrives V8 may be in one of 3 states:
-   * 1. V8 is running script; V8 will automatically interrupt and process all
-   * pending messages (however auto_break flag should be enabled);
-   * 2. V8 is suspended on debug breakpoint; in this state V8 is dedicated
-   * to reading and processing debug messages;
-   * 3. V8 is not running at all or has called some long-working C++ function;
-   * by default it means that processing of all debug message will be deferred
-   * until V8 gets control again; however, embedding application may improve
-   * this by manually calling this method.
-   *
-   * It makes sense to call this method whenever a new debug message arrived and
-   * V8 is not already running. Method v8::Debug::SetDebugMessageDispatchHandler
-   * should help with the former condition.
-   *
-   * Technically this method in many senses is equivalent to executing empty
-   * script:
-   * 1. It does nothing except for processing all pending debug messages.
-   * 2. It should be invoked with the same precautions and from the same context
-   * as V8 script would be invoked from, because:
-   *   a. with "evaluate" command it can do whatever normal script can do,
-   *   including all native calls;
-   *   b. no other thread should call V8 while this method is running
-   *   (v8::Locker may be used here).
-   *
-   * "Evaluate" debug command behavior currently is not specified in scope
-   * of this method.
-   */
-  static void ProcessDebugMessages();
-
-  /**
-   * Debugger is running in it's own context which is entered while debugger
-   * messages are being dispatched. This is an explicit getter for this
-   * debugger context. Note that the content of the debugger context is subject
-   * to change.
-   */
-  static Local<Context> GetDebugContext();
-};
-
-
-}  // namespace v8
-
-
-#undef EXPORT
-
-
-#endif  // V8_V8_DEBUG_H_

data/ext/v8/upstream/2.3.3/include/v8-profiler.h

@@ -1,353 +0,0 @@
-// Copyright 2010 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#ifndef V8_V8_PROFILER_H_
-#define V8_V8_PROFILER_H_
-
-#include "v8.h"
-
-#ifdef _WIN32
-// Setup for Windows DLL export/import. See v8.h in this directory for
-// information on how to build/use V8 as a DLL.
-#if defined(BUILDING_V8_SHARED) && defined(USING_V8_SHARED)
-#error both BUILDING_V8_SHARED and USING_V8_SHARED are set - please check the\
-  build configuration to ensure that at most one of these is set
-#endif
-
-#ifdef BUILDING_V8_SHARED
-#define V8EXPORT __declspec(dllexport)
-#elif USING_V8_SHARED
-#define V8EXPORT __declspec(dllimport)
-#else
-#define V8EXPORT
-#endif
-
-#else  // _WIN32
-
-// Setup for Linux shared library export. See v8.h in this directory for
-// information on how to build/use V8 as shared library.
-#if defined(__GNUC__) && (__GNUC__ >= 4) && defined(V8_SHARED)
-#define V8EXPORT __attribute__ ((visibility("default")))
-#else  // defined(__GNUC__) && (__GNUC__ >= 4)
-#define V8EXPORT
-#endif  // defined(__GNUC__) && (__GNUC__ >= 4)
-
-#endif  // _WIN32
-
-
-/**
- * Profiler support for the V8 JavaScript engine.
- */
-namespace v8 {
-
-
-/**
- * CpuProfileNode represents a node in a call graph.
- */
-class V8EXPORT CpuProfileNode {
- public:
-  /** Returns function name (empty string for anonymous functions.) */
-  Handle<String> GetFunctionName() const;
-
-  /** Returns resource name for script from where the function originates. */
-  Handle<String> GetScriptResourceName() const;
-
-  /**
-   * Returns the number, 1-based, of the line where the function originates.
-   * kNoLineNumberInfo if no line number information is available.
-   */
-  int GetLineNumber() const;
-
-  /**
-   * Returns total (self + children) execution time of the function,
-   * in milliseconds, estimated by samples count.
-   */
-  double GetTotalTime() const;
-
-  /**
-   * Returns self execution time of the function, in milliseconds,
-   * estimated by samples count.
-   */
-  double GetSelfTime() const;
-
-  /** Returns the count of samples where function exists. */
-  double GetTotalSamplesCount() const;
-
-  /** Returns the count of samples where function was currently executing. */
-  double GetSelfSamplesCount() const;
-
-  /** Returns function entry UID. */
-  unsigned GetCallUid() const;
-
-  /** Returns child nodes count of the node. */
-  int GetChildrenCount() const;
-
-  /** Retrieves a child node by index. */
-  const CpuProfileNode* GetChild(int index) const;
-
-  static const int kNoLineNumberInfo = Message::kNoLineNumberInfo;
-};
-
-
-/**
- * CpuProfile contains a CPU profile in a form of two call trees:
- *  - top-down (from main() down to functions that do all the work);
- *  - bottom-up call graph (in backward direction).
- */
-class V8EXPORT CpuProfile {
- public:
-  /** Returns CPU profile UID (assigned by the profiler.) */
-  unsigned GetUid() const;
-
-  /** Returns CPU profile title. */
-  Handle<String> GetTitle() const;
-
-  /** Returns the root node of the bottom up call tree. */
-  const CpuProfileNode* GetBottomUpRoot() const;
-
-  /** Returns the root node of the top down call tree. */
-  const CpuProfileNode* GetTopDownRoot() const;
-};
-
-
-/**
- * Interface for controlling CPU profiling.
- */
-class V8EXPORT CpuProfiler {
- public:
-  /**
-   * A note on security tokens usage. As scripts from different
-   * origins can run inside a single V8 instance, it is possible to
-   * have functions from different security contexts intermixed in a
-   * single CPU profile. To avoid exposing function names belonging to
-   * other contexts, filtering by security token is performed while
-   * obtaining profiling results.
-   */
-
-  /**
-   * Returns the number of profiles collected (doesn't include
-   * profiles that are being collected at the moment of call.)
-   */
-  static int GetProfilesCount();
-
-  /** Returns a profile by index. */
-  static const CpuProfile* GetProfile(
-      int index,
-      Handle<Value> security_token = Handle<Value>());
-
-  /** Returns a profile by uid. */
-  static const CpuProfile* FindProfile(
-      unsigned uid,
-      Handle<Value> security_token = Handle<Value>());
-
-  /**
-   * Starts collecting CPU profile. Title may be an empty string. It
-   * is allowed to have several profiles being collected at
-   * once. Attempts to start collecting several profiles with the same
-   * title are silently ignored. While collecting a profile, functions
-   * from all security contexts are included in it. The token-based
-   * filtering is only performed when querying for a profile.
-   */
-  static void StartProfiling(Handle<String> title);
-
-  /**
-   * Stops collecting CPU profile with a given title and returns it.
-   * If the title given is empty, finishes the last profile started.
-   */
-  static const CpuProfile* StopProfiling(
-      Handle<String> title,
-      Handle<Value> security_token = Handle<Value>());
-};
-
-
-class HeapGraphNode;
-
-
-/**
- * HeapSnapshotEdge represents a directed connection between heap
- * graph nodes: from retaners to retained nodes.
- */
-class V8EXPORT HeapGraphEdge {
- public:
-  enum Type {
-    CONTEXT_VARIABLE = 0,  // A variable from a function context.
-    ELEMENT = 1,           // An element of an array.
-    PROPERTY = 2,          // A named object property.
-    INTERNAL = 3           // A link that can't be accessed from JS,
-                           // thus, its name isn't a real property name.
-  };
-
-  /** Returns edge type (see HeapGraphEdge::Type). */
-  Type GetType() const;
-
-  /**
-   * Returns edge name. This can be a variable name, an element index, or
-   * a property name.
-   */
-  Handle<Value> GetName() const;
-
-  /** Returns origin node. */
-  const HeapGraphNode* GetFromNode() const;
-
-  /** Returns destination node. */
-  const HeapGraphNode* GetToNode() const;
-};
-
-
-class V8EXPORT HeapGraphPath {
- public:
-  /** Returns the number of edges in the path. */
-  int GetEdgesCount() const;
-
-  /** Returns an edge from the path. */
-  const HeapGraphEdge* GetEdge(int index) const;
-
-  /** Returns origin node. */
-  const HeapGraphNode* GetFromNode() const;
-
-  /** Returns destination node. */
-  const HeapGraphNode* GetToNode() const;
-};
-
-
-/**
- * HeapGraphNode represents a node in a heap graph.
- */
-class V8EXPORT HeapGraphNode {
- public:
-  enum Type {
-    INTERNAL = 0,   // Internal node, a virtual one, for housekeeping.
-    ARRAY = 1,      // An array of elements.
-    STRING = 2,     // A string.
-    OBJECT = 3,     // A JS object (except for arrays and strings).
-    CODE = 4,       // Compiled code.
-    CLOSURE = 5     // Function closure.
-  };
-
-  /** Returns node type (see HeapGraphNode::Type). */
-  Type GetType() const;
-
-  /**
-   * Returns node name. Depending on node's type this can be the name
-   * of the constructor (for objects), the name of the function (for
-   * closures), string value, or an empty string (for compiled code).
-   */
-  Handle<String> GetName() const;
-
-  /**
-   * Returns node id. For the same heap object, the id remains the same
-   * across all snapshots.
-   */
-  uint64_t GetId() const;
-
-  /** Returns node's own size, in bytes. */
-  int GetSelfSize() const;
-
-  /** Returns node's network (self + reachable nodes) size, in bytes. */
-  int GetTotalSize() const;
-
-  /**
-   * Returns node's private size, in bytes. That is, the size of memory
-   * that will be reclaimed having this node collected.
-   */
-  int GetPrivateSize() const;
-
-  /** Returns child nodes count of the node. */
-  int GetChildrenCount() const;
-
-  /** Retrieves a child by index. */
-  const HeapGraphEdge* GetChild(int index) const;
-
-  /** Returns retainer nodes count of the node. */
-  int GetRetainersCount() const;
-
-  /** Returns a retainer by index. */
-  const HeapGraphEdge* GetRetainer(int index) const;
-
-  /** Returns the number of simple retaining paths from the root to the node. */
-  int GetRetainingPathsCount() const;
-
-  /** Returns a retaining path by index. */
-  const HeapGraphPath* GetRetainingPath(int index) const;
-};
-
-
-class V8EXPORT HeapSnapshotsDiff {
- public:
-  /** Returns the root node for added nodes. */
-  const HeapGraphNode* GetAdditionsRoot() const;
-
-  /** Returns the root node for deleted nodes. */
-  const HeapGraphNode* GetDeletionsRoot() const;
-};
-
-
-/**
- * HeapSnapshots record the state of the JS heap at some moment.
- */
-class V8EXPORT HeapSnapshot {
- public:
-  /** Returns heap snapshot UID (assigned by the profiler.) */
-  unsigned GetUid() const;
-
-  /** Returns heap snapshot title. */
-  Handle<String> GetTitle() const;
-
-  /** Returns the root node of the heap graph. */
-  const HeapGraphNode* GetRoot() const;
-
-  /** Returns a diff between this snapshot and another one. */
-  const HeapSnapshotsDiff* CompareWith(const HeapSnapshot* snapshot) const;
-};
-
-
-/**
- * Interface for controlling heap profiling.
- */
-class V8EXPORT HeapProfiler {
- public:
-  /** Returns the number of snapshots taken. */
-  static int GetSnapshotsCount();
-
-  /** Returns a snapshot by index. */
-  static const HeapSnapshot* GetSnapshot(int index);
-
-  /** Returns a profile by uid. */
-  static const HeapSnapshot* FindSnapshot(unsigned uid);
-
-  /** Takes a heap snapshot and returns it. Title may be an empty string. */
-  static const HeapSnapshot* TakeSnapshot(Handle<String> title);
-};
-
-
-}  // namespace v8
-
-
-#undef V8EXPORT
-
-
-#endif  // V8_V8_PROFILER_H_