therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/2.3.3/src/arm/cpu-arm.cc

@@ -1,142 +0,0 @@
-// Copyright 2006-2009 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// CPU specific code for arm independent of OS goes here.
-#ifdef __arm__
-#include <sys/syscall.h>  // for cache flushing.
-#endif
-
-#include "v8.h"
-
-#if defined(V8_TARGET_ARCH_ARM)
-
-#include "cpu.h"
-#include "macro-assembler.h"
-
-#ifndef __arm__
-#include "simulator-arm.h"  // for cache flushing.
-#endif
-
-namespace v8 {
-namespace internal {
-
-void CPU::Setup() {
-  CpuFeatures::Probe();
-}
-
-
-void CPU::FlushICache(void* start, size_t size) {
-#if !defined (__arm__)
-  // Not generating ARM instructions for C-code. This means that we are
-  // building an ARM emulator based target.  We should notify the simulator
-  // that the Icache was flushed.
-  // None of this code ends up in the snapshot so there are no issues
-  // around whether or not to generate the code when building snapshots.
-  assembler::arm::Simulator::FlushICache(start, size);
-#else
-  // Ideally, we would call
-  //   syscall(__ARM_NR_cacheflush, start,
-  //           reinterpret_cast<intptr_t>(start) + size, 0);
-  // however, syscall(int, ...) is not supported on all platforms, especially
-  // not when using EABI, so we call the __ARM_NR_cacheflush syscall directly.
-
-  register uint32_t beg asm("a1") = reinterpret_cast<uint32_t>(start);
-  register uint32_t end asm("a2") =
-      reinterpret_cast<uint32_t>(start) + size;
-  register uint32_t flg asm("a3") = 0;
-  #ifdef __ARM_EABI__
-    #if defined (__arm__) && !defined(__thumb__)
-      // __arm__ may be defined in thumb mode.
-      register uint32_t scno asm("r7") = __ARM_NR_cacheflush;
-      asm volatile(
-          "swi 0x0"
-          : "=r" (beg)
-          : "0" (beg), "r" (end), "r" (flg), "r" (scno));
-    #else
-      // r7 is reserved by the EABI in thumb mode.
-      asm volatile(
-      "@   Enter ARM Mode  \n\t"
-          "adr r3, 1f      \n\t"
-          "bx  r3          \n\t"
-          ".ALIGN 4        \n\t"
-          ".ARM            \n"
-      "1:  push {r7}       \n\t"
-          "mov r7, %4      \n\t"
-          "swi 0x0         \n\t"
-          "pop {r7}        \n\t"
-      "@   Enter THUMB Mode\n\t"
-          "adr r3, 2f+1    \n\t"
-          "bx  r3          \n\t"
-          ".THUMB          \n"
-      "2:                  \n\t"
-          : "=r" (beg)
-          : "0" (beg), "r" (end), "r" (flg), "r" (__ARM_NR_cacheflush)
-          : "r3");
-    #endif
-  #else
-    #if defined (__arm__) && !defined(__thumb__)
-      // __arm__ may be defined in thumb mode.
-      asm volatile(
-          "swi %1"
-          : "=r" (beg)
-          : "i" (__ARM_NR_cacheflush), "0" (beg), "r" (end), "r" (flg));
-    #else
-      // Do not use the value of __ARM_NR_cacheflush in the inline assembly
-      // below, because the thumb mode value would be used, which would be
-      // wrong, since we switch to ARM mode before executing the swi instruction
-      asm volatile(
-      "@   Enter ARM Mode  \n\t"
-          "adr r3, 1f      \n\t"
-          "bx  r3          \n\t"
-          ".ALIGN 4        \n\t"
-          ".ARM            \n"
-      "1:  swi 0x9f0002    \n"
-      "@   Enter THUMB Mode\n\t"
-          "adr r3, 2f+1    \n\t"
-          "bx  r3          \n\t"
-          ".THUMB          \n"
-      "2:                  \n\t"
-          : "=r" (beg)
-          : "0" (beg), "r" (end), "r" (flg)
-          : "r3");
-    #endif
-  #endif
-#endif
-}
-
-
-void CPU::DebugBreak() {
-#if !defined (__arm__) || !defined(CAN_USE_ARMV5_INSTRUCTIONS)
-  UNIMPLEMENTED();  // when building ARM emulator target
-#else
-  asm volatile("bkpt 0");
-#endif
-}
-
-} }  // namespace v8::internal
-
-#endif  // V8_TARGET_ARCH_ARM

data/ext/v8/upstream/2.3.3/src/arm/debug-arm.cc

@@ -1,309 +0,0 @@
-// Copyright 2006-2008 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include "v8.h"
-
-#if defined(V8_TARGET_ARCH_ARM)
-
-#include "codegen-inl.h"
-#include "debug.h"
-
-namespace v8 {
-namespace internal {
-
-#ifdef ENABLE_DEBUGGER_SUPPORT
-bool BreakLocationIterator::IsDebugBreakAtReturn() {
-  return Debug::IsDebugBreakAtReturn(rinfo());
-}
-
-
-void BreakLocationIterator::SetDebugBreakAtReturn() {
-  // Patch the code changing the return from JS function sequence from
-  //   mov sp, fp
-  //   ldmia sp!, {fp, lr}
-  //   add sp, sp, #4
-  //   bx lr
-  // to a call to the debug break return code.
-  // #if USE_BLX
-  //   ldr ip, [pc, #0]
-  //   blx ip
-  // #else
-  //   mov lr, pc
-  //   ldr pc, [pc, #-4]
-  // #endif
-  //   <debug break return code entry point address>
-  //   bktp 0
-  CodePatcher patcher(rinfo()->pc(), Assembler::kJSReturnSequenceInstructions);
-#ifdef USE_BLX
-  patcher.masm()->ldr(v8::internal::ip, MemOperand(v8::internal::pc, 0));
-  patcher.masm()->blx(v8::internal::ip);
-#else
-  patcher.masm()->mov(v8::internal::lr, v8::internal::pc);
-  patcher.masm()->ldr(v8::internal::pc, MemOperand(v8::internal::pc, -4));
-#endif
-  patcher.Emit(Debug::debug_break_return()->entry());
-  patcher.masm()->bkpt(0);
-}
-
-
-// Restore the JS frame exit code.
-void BreakLocationIterator::ClearDebugBreakAtReturn() {
-  rinfo()->PatchCode(original_rinfo()->pc(),
-                     Assembler::kJSReturnSequenceInstructions);
-}
-
-
-// A debug break in the frame exit code is identified by the JS frame exit code
-// having been patched with a call instruction.
-bool Debug::IsDebugBreakAtReturn(RelocInfo* rinfo) {
-  ASSERT(RelocInfo::IsJSReturn(rinfo->rmode()));
-  return rinfo->IsPatchedReturnSequence();
-}
-
-
-bool BreakLocationIterator::IsDebugBreakAtSlot() {
-  ASSERT(IsDebugBreakSlot());
-  // Check whether the debug break slot instructions have been patched.
-  return rinfo()->IsPatchedDebugBreakSlotSequence();
-}
-
-
-void BreakLocationIterator::SetDebugBreakAtSlot() {
-  ASSERT(IsDebugBreakSlot());
-  // Patch the code changing the debug break slot code from
-  //   mov r2, r2
-  //   mov r2, r2
-  //   mov r2, r2
-  // to a call to the debug break slot code.
-  // #if USE_BLX
-  //   ldr ip, [pc, #0]
-  //   blx ip
-  // #else
-  //   mov lr, pc
-  //   ldr pc, [pc, #-4]
-  // #endif
-  //   <debug break slot code entry point address>
-  CodePatcher patcher(rinfo()->pc(), Assembler::kDebugBreakSlotInstructions);
-#ifdef USE_BLX
-  patcher.masm()->ldr(v8::internal::ip, MemOperand(v8::internal::pc, 0));
-  patcher.masm()->blx(v8::internal::ip);
-#else
-  patcher.masm()->mov(v8::internal::lr, v8::internal::pc);
-  patcher.masm()->ldr(v8::internal::pc, MemOperand(v8::internal::pc, -4));
-#endif
-  patcher.Emit(Debug::debug_break_return()->entry());
-}
-
-
-void BreakLocationIterator::ClearDebugBreakAtSlot() {
-  ASSERT(IsDebugBreakSlot());
-  rinfo()->PatchCode(original_rinfo()->pc(),
-                     Assembler::kDebugBreakSlotInstructions);
-}
-
-
-#define __ ACCESS_MASM(masm)
-
-
-static void Generate_DebugBreakCallHelper(MacroAssembler* masm,
-                                          RegList pointer_regs) {
-  // Save the content of all general purpose registers in memory. This copy in
-  // memory is later pushed onto the JS expression stack for the fake JS frame
-  // generated and also to the C frame generated on top of that. In the JS
-  // frame ONLY the registers containing pointers will be pushed on the
-  // expression stack. This causes the GC to update these  pointers so that
-  // they will have the correct value when returning from the debugger.
-  __ SaveRegistersToMemory(kJSCallerSaved);
-
-  __ EnterInternalFrame();
-
-  // Store the registers containing object pointers on the expression stack to
-  // make sure that these are correctly updated during GC.
-  // Use sp as base to push.
-  __ CopyRegistersFromMemoryToStack(sp, pointer_regs);
-
-#ifdef DEBUG
-  __ RecordComment("// Calling from debug break to runtime - come in - over");
-#endif
-  __ mov(r0, Operand(0));  // no arguments
-  __ mov(r1, Operand(ExternalReference::debug_break()));
-
-  CEntryStub ceb(1, ExitFrame::MODE_DEBUG);
-  __ CallStub(&ceb);
-
-  // Restore the register values containing object pointers from the expression
-  // stack in the reverse order as they where pushed.
-  // Use sp as base to pop.
-  __ CopyRegistersFromStackToMemory(sp, r3, pointer_regs);
-
-  __ LeaveInternalFrame();
-
-  // Finally restore all registers.
-  __ RestoreRegistersFromMemory(kJSCallerSaved);
-
-  // Now that the break point has been handled, resume normal execution by
-  // jumping to the target address intended by the caller and that was
-  // overwritten by the address of DebugBreakXXX.
-  __ mov(ip, Operand(ExternalReference(Debug_Address::AfterBreakTarget())));
-  __ ldr(ip, MemOperand(ip));
-  __ Jump(ip);
-}
-
-
-void Debug::GenerateLoadICDebugBreak(MacroAssembler* masm) {
-  // Calling convention for IC load (from ic-arm.cc).
-  // ----------- S t a t e -------------
-  //  -- r2    : name
-  //  -- lr    : return address
-  //  -- r0    : receiver
-  //  -- [sp]  : receiver
-  // -----------------------------------
-  // Registers r0 and r2 contain objects that need to be pushed on the
-  // expression stack of the fake JS frame.
-  Generate_DebugBreakCallHelper(masm, r0.bit() | r2.bit());
-}
-
-
-void Debug::GenerateStoreICDebugBreak(MacroAssembler* masm) {
-  // Calling convention for IC store (from ic-arm.cc).
-  // ----------- S t a t e -------------
-  //  -- r0    : value
-  //  -- r1    : receiver
-  //  -- r2    : name
-  //  -- lr    : return address
-  // -----------------------------------
-  // Registers r0, r1, and r2 contain objects that need to be pushed on the
-  // expression stack of the fake JS frame.
-  Generate_DebugBreakCallHelper(masm, r0.bit() | r1.bit() | r2.bit());
-}
-
-
-void Debug::GenerateKeyedLoadICDebugBreak(MacroAssembler* masm) {
-  // ---------- S t a t e --------------
-  //  -- lr     : return address
-  //  -- r0     : key
-  //  -- sp[0]  : key
-  //  -- sp[4]  : receiver
-  Generate_DebugBreakCallHelper(masm, r0.bit());
-}
-
-
-void Debug::GenerateKeyedStoreICDebugBreak(MacroAssembler* masm) {
-  // ---------- S t a t e --------------
-  //  -- r0     : value
-  //  -- r1     : key
-  //  -- r2     : receiver
-  //  -- lr     : return address
-  Generate_DebugBreakCallHelper(masm, r0.bit() | r1.bit() | r2.bit());
-}
-
-
-void Debug::GenerateCallICDebugBreak(MacroAssembler* masm) {
-  // Calling convention for IC call (from ic-arm.cc)
-  // ----------- S t a t e -------------
-  //  -- r0: number of arguments
-  //  -- r1: receiver
-  //  -- lr: return address
-  // -----------------------------------
-  // Register r1 contains an object that needs to be pushed on the expression
-  // stack of the fake JS frame. r0 is the actual number of arguments not
-  // encoded as a smi, therefore it cannot be on the expression stack of the
-  // fake JS frame as it can easily be an invalid pointer (e.g. 1). r0 will be
-  // pushed on the stack of the C frame and restored from there.
-  Generate_DebugBreakCallHelper(masm, r1.bit());
-}
-
-
-void Debug::GenerateConstructCallDebugBreak(MacroAssembler* masm) {
-  // In places other than IC call sites it is expected that r0 is TOS which
-  // is an object - this is not generally the case so this should be used with
-  // care.
-  Generate_DebugBreakCallHelper(masm, r0.bit());
-}
-
-
-void Debug::GenerateReturnDebugBreak(MacroAssembler* masm) {
-  // In places other than IC call sites it is expected that r0 is TOS which
-  // is an object - this is not generally the case so this should be used with
-  // care.
-  Generate_DebugBreakCallHelper(masm, r0.bit());
-}
-
-
-void Debug::GenerateStubNoRegistersDebugBreak(MacroAssembler* masm) {
-  // ----------- S t a t e -------------
-  //  No registers used on entry.
-  // -----------------------------------
-  Generate_DebugBreakCallHelper(masm, 0);
-}
-
-
-void Debug::GenerateSlot(MacroAssembler* masm) {
-  // Generate enough nop's to make space for a call instruction. Avoid emitting
-  // the constant pool in the debug break slot code.
-  Assembler::BlockConstPoolScope block_const_pool(masm);
-  Label check_codesize;
-  __ bind(&check_codesize);
-  __ RecordDebugBreakSlot();
-  for (int i = 0; i < Assembler::kDebugBreakSlotInstructions; i++) {
-    __ nop(2);
-  }
-  ASSERT_EQ(Assembler::kDebugBreakSlotInstructions,
-            masm->InstructionsGeneratedSince(&check_codesize));
-}
-
-
-void Debug::GenerateSlotDebugBreak(MacroAssembler* masm) {
-  // In the places where a debug break slot is inserted no registers can contain
-  // object pointers.
-  Generate_DebugBreakCallHelper(masm, 0);
-}
-
-
-void Debug::GeneratePlainReturnLiveEdit(MacroAssembler* masm) {
-  masm->Abort("LiveEdit frame dropping is not supported on arm");
-}
-
-
-void Debug::GenerateFrameDropperLiveEdit(MacroAssembler* masm) {
-  masm->Abort("LiveEdit frame dropping is not supported on arm");
-}
-
-#undef __
-
-
-void Debug::SetUpFrameDropperFrame(StackFrame* bottom_js_frame,
-                                   Handle<Code> code) {
-  UNREACHABLE();
-}
-const int Debug::kFrameDropperFrameSize = -1;
-
-#endif  // ENABLE_DEBUGGER_SUPPORT
-
-} }  // namespace v8::internal
-
-#endif  // V8_TARGET_ARCH_ARM