therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/2.3.3/src/platform.h

@@ -1,577 +0,0 @@
-// Copyright 2006-2008 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// This module contains the platform-specific code. This make the rest of the
-// code less dependent on operating system, compilers and runtime libraries.
-// This module does specifically not deal with differences between different
-// processor architecture.
-// The platform classes have the same definition for all platforms. The
-// implementation for a particular platform is put in platform_<os>.cc.
-// The build system then uses the implementation for the target platform.
-//
-// This design has been chosen because it is simple and fast. Alternatively,
-// the platform dependent classes could have been implemented using abstract
-// superclasses with virtual methods and having specializations for each
-// platform. This design was rejected because it was more complicated and
-// slower. It would require factory methods for selecting the right
-// implementation and the overhead of virtual methods for performance
-// sensitive like mutex locking/unlocking.
-
-#ifndef V8_PLATFORM_H_
-#define V8_PLATFORM_H_
-
-#define V8_INFINITY INFINITY
-
-// Windows specific stuff.
-#ifdef WIN32
-
-// Microsoft Visual C++ specific stuff.
-#ifdef _MSC_VER
-
-enum {
-  FP_NAN,
-  FP_INFINITE,
-  FP_ZERO,
-  FP_SUBNORMAL,
-  FP_NORMAL
-};
-
-#undef V8_INFINITY
-#define V8_INFINITY HUGE_VAL
-
-namespace v8 {
-namespace internal {
-int isfinite(double x);
-} }
-int isnan(double x);
-int isinf(double x);
-int isless(double x, double y);
-int isgreater(double x, double y);
-int fpclassify(double x);
-int signbit(double x);
-
-int strncasecmp(const char* s1, const char* s2, int n);
-
-#endif  // _MSC_VER
-
-// Random is missing on both Visual Studio and MinGW.
-int random();
-
-#endif  // WIN32
-
-
-#ifdef __sun
-# ifndef signbit
-int signbit(double x);
-# endif
-#endif
-
-
-// GCC specific stuff
-#ifdef __GNUC__
-
-// Needed for va_list on at least MinGW and Android.
-#include <stdarg.h>
-
-#define __GNUC_VERSION__ (__GNUC__ * 10000 + __GNUC_MINOR__ * 100)
-
-// Unfortunately, the INFINITY macro cannot be used with the '-pedantic'
-// warning flag and certain versions of GCC due to a bug:
-// http://gcc.gnu.org/bugzilla/show_bug.cgi?id=11931
-// For now, we use the more involved template-based version from <limits>, but
-// only when compiling with GCC versions affected by the bug (2.96.x - 4.0.x)
-// __GNUC_PREREQ is not defined in GCC for Mac OS X, so we define our own macro
-#if __GNUC_VERSION__ >= 29600 && __GNUC_VERSION__ < 40100
-#include <limits>
-#undef V8_INFINITY
-#define V8_INFINITY std::numeric_limits<double>::infinity()
-#endif
-
-#endif  // __GNUC__
-
-namespace v8 {
-namespace internal {
-
-// Use AtomicWord for a machine-sized pointer. It is assumed that
-// reads and writes of naturally aligned values of this type are atomic.
-typedef intptr_t AtomicWord;
-
-class Semaphore;
-
-double ceiling(double x);
-double modulo(double x, double y);
-
-// Forward declarations.
-class Socket;
-
-// ----------------------------------------------------------------------------
-// OS
-//
-// This class has static methods for the different platform specific
-// functions. Add methods here to cope with differences between the
-// supported platforms.
-
-class OS {
- public:
-  // Initializes the platform OS support. Called once at VM startup.
-  static void Setup();
-
-  // Returns the accumulated user time for thread. This routine
-  // can be used for profiling. The implementation should
-  // strive for high-precision timer resolution, preferable
-  // micro-second resolution.
-  static int GetUserTime(uint32_t* secs,  uint32_t* usecs);
-
-  // Get a tick counter normalized to one tick per microsecond.
-  // Used for calculating time intervals.
-  static int64_t Ticks();
-
-  // Returns current time as the number of milliseconds since
-  // 00:00:00 UTC, January 1, 1970.
-  static double TimeCurrentMillis();
-
-  // Returns a string identifying the current time zone. The
-  // timestamp is used for determining if DST is in effect.
-  static const char* LocalTimezone(double time);
-
-  // Returns the local time offset in milliseconds east of UTC without
-  // taking daylight savings time into account.
-  static double LocalTimeOffset();
-
-  // Returns the daylight savings offset for the given time.
-  static double DaylightSavingsOffset(double time);
-
-  static FILE* FOpen(const char* path, const char* mode);
-
-  // Log file open mode is platform-dependent due to line ends issues.
-  static const char* LogFileOpenMode;
-
-  // Print output to console. This is mostly used for debugging output.
-  // On platforms that has standard terminal output, the output
-  // should go to stdout.
-  static void Print(const char* format, ...);
-  static void VPrint(const char* format, va_list args);
-
-  // Print error output to console. This is mostly used for error message
-  // output. On platforms that has standard terminal output, the output
-  // should go to stderr.
-  static void PrintError(const char* format, ...);
-  static void VPrintError(const char* format, va_list args);
-
-  // Allocate/Free memory used by JS heap. Pages are readable/writable, but
-  // they are not guaranteed to be executable unless 'executable' is true.
-  // Returns the address of allocated memory, or NULL if failed.
-  static void* Allocate(const size_t requested,
-                        size_t* allocated,
-                        bool is_executable);
-  static void Free(void* address, const size_t size);
-  // Get the Alignment guaranteed by Allocate().
-  static size_t AllocateAlignment();
-
-#ifdef ENABLE_HEAP_PROTECTION
-  // Protect/unprotect a block of memory by marking it read-only/writable.
-  static void Protect(void* address, size_t size);
-  static void Unprotect(void* address, size_t size, bool is_executable);
-#endif
-
-  // Returns an indication of whether a pointer is in a space that
-  // has been allocated by Allocate().  This method may conservatively
-  // always return false, but giving more accurate information may
-  // improve the robustness of the stack dump code in the presence of
-  // heap corruption.
-  static bool IsOutsideAllocatedSpace(void* pointer);
-
-  // Sleep for a number of milliseconds.
-  static void Sleep(const int milliseconds);
-
-  // Abort the current process.
-  static void Abort();
-
-  // Debug break.
-  static void DebugBreak();
-
-  // Walk the stack.
-  static const int kStackWalkError = -1;
-  static const int kStackWalkMaxNameLen = 256;
-  static const int kStackWalkMaxTextLen = 256;
-  struct StackFrame {
-    void* address;
-    char text[kStackWalkMaxTextLen];
-  };
-
-  static int StackWalk(Vector<StackFrame> frames);
-
-  // Factory method for creating platform dependent Mutex.
-  // Please use delete to reclaim the storage for the returned Mutex.
-  static Mutex* CreateMutex();
-
-  // Factory method for creating platform dependent Semaphore.
-  // Please use delete to reclaim the storage for the returned Semaphore.
-  static Semaphore* CreateSemaphore(int count);
-
-  // Factory method for creating platform dependent Socket.
-  // Please use delete to reclaim the storage for the returned Socket.
-  static Socket* CreateSocket();
-
-  class MemoryMappedFile {
-   public:
-    static MemoryMappedFile* create(const char* name, int size, void* initial);
-    virtual ~MemoryMappedFile() { }
-    virtual void* memory() = 0;
-  };
-
-  // Safe formatting print. Ensures that str is always null-terminated.
-  // Returns the number of chars written, or -1 if output was truncated.
-  static int SNPrintF(Vector<char> str, const char* format, ...);
-  static int VSNPrintF(Vector<char> str,
-                       const char* format,
-                       va_list args);
-
-  static char* StrChr(char* str, int c);
-  static void StrNCpy(Vector<char> dest, const char* src, size_t n);
-
-  // Support for profiler.  Can do nothing, in which case ticks
-  // occuring in shared libraries will not be properly accounted
-  // for.
-  static void LogSharedLibraryAddresses();
-
-  // The return value indicates the CPU features we are sure of because of the
-  // OS.  For example MacOSX doesn't run on any x86 CPUs that don't have SSE2
-  // instructions.
-  // This is a little messy because the interpretation is subject to the cross
-  // of the CPU and the OS.  The bits in the answer correspond to the bit
-  // positions indicated by the members of the CpuFeature enum from globals.h
-  static uint64_t CpuFeaturesImpliedByPlatform();
-
-  // Returns the double constant NAN
-  static double nan_value();
-
-  // Support runtime detection of VFP3 on ARM CPUs.
-  static bool ArmCpuHasFeature(CpuFeature feature);
-
-  // Returns the activation frame alignment constraint or zero if
-  // the platform doesn't care. Guaranteed to be a power of two.
-  static int ActivationFrameAlignment();
-
-  static void ReleaseStore(volatile AtomicWord* ptr, AtomicWord value);
-
- private:
-  static const int msPerSecond = 1000;
-
-  DISALLOW_IMPLICIT_CONSTRUCTORS(OS);
-};
-
-
-class VirtualMemory {
- public:
-  // Reserves virtual memory with size.
-  explicit VirtualMemory(size_t size);
-  ~VirtualMemory();
-
-  // Returns whether the memory has been reserved.
-  bool IsReserved();
-
-  // Returns the start address of the reserved memory.
-  void* address() {
-    ASSERT(IsReserved());
-    return address_;
-  };
-
-  // Returns the size of the reserved memory.
-  size_t size() { return size_; }
-
-  // Commits real memory. Returns whether the operation succeeded.
-  bool Commit(void* address, size_t size, bool is_executable);
-
-  // Uncommit real memory.  Returns whether the operation succeeded.
-  bool Uncommit(void* address, size_t size);
-
- private:
-  void* address_;  // Start address of the virtual memory.
-  size_t size_;  // Size of the virtual memory.
-};
-
-
-// ----------------------------------------------------------------------------
-// ThreadHandle
-//
-// A ThreadHandle represents a thread identifier for a thread. The ThreadHandle
-// does not own the underlying os handle. Thread handles can be used for
-// refering to threads and testing equality.
-
-class ThreadHandle {
- public:
-  enum Kind { SELF, INVALID };
-  explicit ThreadHandle(Kind kind);
-
-  // Destructor.
-  ~ThreadHandle();
-
-  // Test for thread running.
-  bool IsSelf() const;
-
-  // Test for valid thread handle.
-  bool IsValid() const;
-
-  // Get platform-specific data.
-  class PlatformData;
-  PlatformData* thread_handle_data() { return data_; }
-
-  // Initialize the handle to kind
-  void Initialize(Kind kind);
-
- private:
-  PlatformData* data_;  // Captures platform dependent data.
-};
-
-
-// ----------------------------------------------------------------------------
-// Thread
-//
-// Thread objects are used for creating and running threads. When the start()
-// method is called the new thread starts running the run() method in the new
-// thread. The Thread object should not be deallocated before the thread has
-// terminated.
-
-class Thread: public ThreadHandle {
- public:
-  // Opaque data type for thread-local storage keys.
-  enum LocalStorageKey {};
-
-  // Create new thread.
-  Thread();
-  virtual ~Thread();
-
-  // Start new thread by calling the Run() method in the new thread.
-  void Start();
-
-  // Wait until thread terminates.
-  void Join();
-
-  // Abstract method for run handler.
-  virtual void Run() = 0;
-
-  // Thread-local storage.
-  static LocalStorageKey CreateThreadLocalKey();
-  static void DeleteThreadLocalKey(LocalStorageKey key);
-  static void* GetThreadLocal(LocalStorageKey key);
-  static int GetThreadLocalInt(LocalStorageKey key) {
-    return static_cast<int>(reinterpret_cast<intptr_t>(GetThreadLocal(key)));
-  }
-  static void SetThreadLocal(LocalStorageKey key, void* value);
-  static void SetThreadLocalInt(LocalStorageKey key, int value) {
-    SetThreadLocal(key, reinterpret_cast<void*>(static_cast<intptr_t>(value)));
-  }
-  static bool HasThreadLocal(LocalStorageKey key) {
-    return GetThreadLocal(key) != NULL;
-  }
-
-  // A hint to the scheduler to let another thread run.
-  static void YieldCPU();
-
- private:
-  class PlatformData;
-  PlatformData* data_;
-  DISALLOW_COPY_AND_ASSIGN(Thread);
-};
-
-
-// ----------------------------------------------------------------------------
-// Mutex
-//
-// Mutexes are used for serializing access to non-reentrant sections of code.
-// The implementations of mutex should allow for nested/recursive locking.
-
-class Mutex {
- public:
-  virtual ~Mutex() {}
-
-  // Locks the given mutex. If the mutex is currently unlocked, it becomes
-  // locked and owned by the calling thread, and immediately. If the mutex
-  // is already locked by another thread, suspends the calling thread until
-  // the mutex is unlocked.
-  virtual int Lock() = 0;
-
-  // Unlocks the given mutex. The mutex is assumed to be locked and owned by
-  // the calling thread on entrance.
-  virtual int Unlock() = 0;
-};
-
-
-// ----------------------------------------------------------------------------
-// ScopedLock
-//
-// Stack-allocated ScopedLocks provide block-scoped locking and unlocking
-// of a mutex.
-class ScopedLock {
- public:
-  explicit ScopedLock(Mutex* mutex): mutex_(mutex) {
-    mutex_->Lock();
-  }
-  ~ScopedLock() {
-    mutex_->Unlock();
-  }
-
- private:
-  Mutex* mutex_;
-  DISALLOW_COPY_AND_ASSIGN(ScopedLock);
-};
-
-
-// ----------------------------------------------------------------------------
-// Semaphore
-//
-// A semaphore object is a synchronization object that maintains a count. The
-// count is decremented each time a thread completes a wait for the semaphore
-// object and incremented each time a thread signals the semaphore. When the
-// count reaches zero,  threads waiting for the semaphore blocks until the
-// count becomes non-zero.
-
-class Semaphore {
- public:
-  virtual ~Semaphore() {}
-
-  // Suspends the calling thread until the semaphore counter is non zero
-  // and then decrements the semaphore counter.
-  virtual void Wait() = 0;
-
-  // Suspends the calling thread until the counter is non zero or the timeout
-  // time has passsed. If timeout happens the return value is false and the
-  // counter is unchanged. Otherwise the semaphore counter is decremented and
-  // true is returned. The timeout value is specified in microseconds.
-  virtual bool Wait(int timeout) = 0;
-
-  // Increments the semaphore counter.
-  virtual void Signal() = 0;
-};
-
-
-// ----------------------------------------------------------------------------
-// Socket
-//
-
-class Socket {
- public:
-  virtual ~Socket() {}
-
-  // Server initialization.
-  virtual bool Bind(const int port) = 0;
-  virtual bool Listen(int backlog) const = 0;
-  virtual Socket* Accept() const = 0;
-
-  // Client initialization.
-  virtual bool Connect(const char* host, const char* port) = 0;
-
-  // Shutdown socket for both read and write. This causes blocking Send and
-  // Receive calls to exit. After Shutdown the Socket object cannot be used for
-  // any communication.
-  virtual bool Shutdown() = 0;
-
-  // Data Transimission
-  virtual int Send(const char* data, int len) const = 0;
-  virtual int Receive(char* data, int len) const = 0;
-
-  // Set the value of the SO_REUSEADDR socket option.
-  virtual bool SetReuseAddress(bool reuse_address) = 0;
-
-  virtual bool IsValid() const = 0;
-
-  static bool Setup();
-  static int LastError();
-  static uint16_t HToN(uint16_t value);
-  static uint16_t NToH(uint16_t value);
-  static uint32_t HToN(uint32_t value);
-  static uint32_t NToH(uint32_t value);
-};
-
-
-// ----------------------------------------------------------------------------
-// Sampler
-//
-// A sampler periodically samples the state of the VM and optionally
-// (if used for profiling) the program counter and stack pointer for
-// the thread that created it.
-
-// TickSample captures the information collected for each sample.
-class TickSample {
- public:
-  TickSample()
-      : state(OTHER),
-        pc(NULL),
-        sp(NULL),
-        fp(NULL),
-        function(NULL),
-        frames_count(0) {}
-  StateTag state;  // The state of the VM.
-  Address pc;  // Instruction pointer.
-  Address sp;  // Stack pointer.
-  Address fp;  // Frame pointer.
-  Address function;  // The last called JS function.
-  static const int kMaxFramesCount = 64;
-  Address stack[kMaxFramesCount];  // Call stack.
-  int frames_count;  // Number of captured frames.
-};
-
-#ifdef ENABLE_LOGGING_AND_PROFILING
-class Sampler {
- public:
-  // Initialize sampler.
-  explicit Sampler(int interval, bool profiling);
-  virtual ~Sampler();
-
-  // Performs stack sampling.
-  virtual void SampleStack(TickSample* sample) = 0;
-
-  // This method is called for each sampling period with the current
-  // program counter.
-  virtual void Tick(TickSample* sample) = 0;
-
-  // Start and stop sampler.
-  void Start();
-  void Stop();
-
-  // Is the sampler used for profiling.
-  inline bool IsProfiling() { return profiling_; }
-
-  // Whether the sampler is running (that is, consumes resources).
-  inline bool IsActive() { return active_; }
-
-  class PlatformData;
-
- private:
-  const int interval_;
-  const bool profiling_;
-  bool active_;
-  PlatformData* data_;  // Platform specific data.
-  DISALLOW_IMPLICIT_CONSTRUCTORS(Sampler);
-};
-
-#endif  // ENABLE_LOGGING_AND_PROFILING
-
-} }  // namespace v8::internal
-
-#endif  // V8_PLATFORM_H_