therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/3.1.8/src/ia32/cpu-ia32.cc

@@ -0,0 +1,87 @@
+// Copyright 2006-2008 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// CPU specific code for ia32 independent of OS goes here.
+
+#ifdef __GNUC__
+#include "third_party/valgrind/valgrind.h"
+#endif
+
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_IA32)
+
+#include "cpu.h"
+#include "macro-assembler.h"
+
+namespace v8 {
+namespace internal {
+
+void CPU::Setup() {
+  CpuFeatures::Clear();
+  CpuFeatures::Probe(true);
+  if (!CpuFeatures::IsSupported(SSE2) || Serializer::enabled()) {
+    V8::DisableCrankshaft();
+  }
+}
+
+
+void CPU::FlushICache(void* start, size_t size) {
+  // No need to flush the instruction cache on Intel. On Intel instruction
+  // cache flushing is only necessary when multiple cores running the same
+  // code simultaneously. V8 (and JavaScript) is single threaded and when code
+  // is patched on an intel CPU the core performing the patching will have its
+  // own instruction cache updated automatically.
+
+  // If flushing of the instruction cache becomes necessary Windows has the
+  // API function FlushInstructionCache.
+
+  // By default, valgrind only checks the stack for writes that might need to
+  // invalidate already cached translated code.  This leads to random
+  // instability when code patches or moves are sometimes unnoticed.  One
+  // solution is to run valgrind with --smc-check=all, but this comes at a big
+  // performance cost.  We can notify valgrind to invalidate its cache.
+#ifdef VALGRIND_DISCARD_TRANSLATIONS
+  VALGRIND_DISCARD_TRANSLATIONS(start, size);
+#endif
+}
+
+
+void CPU::DebugBreak() {
+#ifdef _MSC_VER
+  // To avoid Visual Studio runtime support the following code can be used
+  // instead
+  // __asm { int 3 }
+  __debugbreak();
+#else
+  asm("int $3");
+#endif
+}
+
+} }  // namespace v8::internal
+
+#endif  // V8_TARGET_ARCH_IA32

data/ext/v8/upstream/3.1.8/src/ia32/debug-ia32.cc

@@ -0,0 +1,309 @@
+// Copyright 2010 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_IA32)
+
+#include "codegen-inl.h"
+#include "debug.h"
+
+
+namespace v8 {
+namespace internal {
+
+#ifdef ENABLE_DEBUGGER_SUPPORT
+
+bool BreakLocationIterator::IsDebugBreakAtReturn() {
+  return Debug::IsDebugBreakAtReturn(rinfo());
+}
+
+
+// Patch the JS frame exit code with a debug break call. See
+// CodeGenerator::VisitReturnStatement and VirtualFrame::Exit in codegen-ia32.cc
+// for the precise return instructions sequence.
+void BreakLocationIterator::SetDebugBreakAtReturn() {
+  ASSERT(Assembler::kJSReturnSequenceLength >=
+         Assembler::kCallInstructionLength);
+  rinfo()->PatchCodeWithCall(Debug::debug_break_return()->entry(),
+      Assembler::kJSReturnSequenceLength - Assembler::kCallInstructionLength);
+}
+
+
+// Restore the JS frame exit code.
+void BreakLocationIterator::ClearDebugBreakAtReturn() {
+  rinfo()->PatchCode(original_rinfo()->pc(),
+                     Assembler::kJSReturnSequenceLength);
+}
+
+
+// A debug break in the frame exit code is identified by the JS frame exit code
+// having been patched with a call instruction.
+bool Debug::IsDebugBreakAtReturn(RelocInfo* rinfo) {
+  ASSERT(RelocInfo::IsJSReturn(rinfo->rmode()));
+  return rinfo->IsPatchedReturnSequence();
+}
+
+
+bool BreakLocationIterator::IsDebugBreakAtSlot() {
+  ASSERT(IsDebugBreakSlot());
+  // Check whether the debug break slot instructions have been patched.
+  return rinfo()->IsPatchedDebugBreakSlotSequence();
+}
+
+
+void BreakLocationIterator::SetDebugBreakAtSlot() {
+  ASSERT(IsDebugBreakSlot());
+  rinfo()->PatchCodeWithCall(
+      Debug::debug_break_slot()->entry(),
+      Assembler::kDebugBreakSlotLength - Assembler::kCallInstructionLength);
+}
+
+
+void BreakLocationIterator::ClearDebugBreakAtSlot() {
+  ASSERT(IsDebugBreakSlot());
+  rinfo()->PatchCode(original_rinfo()->pc(), Assembler::kDebugBreakSlotLength);
+}
+
+
+#define __ ACCESS_MASM(masm)
+
+
+static void Generate_DebugBreakCallHelper(MacroAssembler* masm,
+                                          RegList object_regs,
+                                          RegList non_object_regs,
+                                          bool convert_call_to_jmp) {
+  // Enter an internal frame.
+  __ EnterInternalFrame();
+
+  // Store the registers containing live values on the expression stack to
+  // make sure that these are correctly updated during GC. Non object values
+  // are stored as a smi causing it to be untouched by GC.
+  ASSERT((object_regs & ~kJSCallerSaved) == 0);
+  ASSERT((non_object_regs & ~kJSCallerSaved) == 0);
+  ASSERT((object_regs & non_object_regs) == 0);
+  for (int i = 0; i < kNumJSCallerSaved; i++) {
+    int r = JSCallerSavedCode(i);
+    Register reg = { r };
+    if ((object_regs & (1 << r)) != 0) {
+      __ push(reg);
+    }
+    if ((non_object_regs & (1 << r)) != 0) {
+      if (FLAG_debug_code) {
+        __ test(reg, Immediate(0xc0000000));
+        __ Assert(zero, "Unable to encode value as smi");
+      }
+      __ SmiTag(reg);
+      __ push(reg);
+    }
+  }
+
+#ifdef DEBUG
+  __ RecordComment("// Calling from debug break to runtime - come in - over");
+#endif
+  __ Set(eax, Immediate(0));  // No arguments.
+  __ mov(ebx, Immediate(ExternalReference::debug_break()));
+
+  CEntryStub ceb(1);
+  __ CallStub(&ceb);
+
+  // Restore the register values containing object pointers from the expression
+  // stack.
+  for (int i = kNumJSCallerSaved; --i >= 0;) {
+    int r = JSCallerSavedCode(i);
+    Register reg = { r };
+    if (FLAG_debug_code) {
+      __ Set(reg, Immediate(kDebugZapValue));
+    }
+    if ((object_regs & (1 << r)) != 0) {
+      __ pop(reg);
+    }
+    if ((non_object_regs & (1 << r)) != 0) {
+      __ pop(reg);
+      __ SmiUntag(reg);
+    }
+  }
+
+  // Get rid of the internal frame.
+  __ LeaveInternalFrame();
+
+  // If this call did not replace a call but patched other code then there will
+  // be an unwanted return address left on the stack. Here we get rid of that.
+  if (convert_call_to_jmp) {
+    __ add(Operand(esp), Immediate(kPointerSize));
+  }
+
+  // Now that the break point has been handled, resume normal execution by
+  // jumping to the target address intended by the caller and that was
+  // overwritten by the address of DebugBreakXXX.
+  ExternalReference after_break_target =
+      ExternalReference(Debug_Address::AfterBreakTarget());
+  __ jmp(Operand::StaticVariable(after_break_target));
+}
+
+
+void Debug::GenerateLoadICDebugBreak(MacroAssembler* masm) {
+  // Register state for IC load call (from ic-ia32.cc).
+  // ----------- S t a t e -------------
+  //  -- eax    : receiver
+  //  -- ecx    : name
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, eax.bit() | ecx.bit(), 0, false);
+}
+
+
+void Debug::GenerateStoreICDebugBreak(MacroAssembler* masm) {
+  // Register state for IC store call (from ic-ia32.cc).
+  // ----------- S t a t e -------------
+  //  -- eax    : value
+  //  -- ecx    : name
+  //  -- edx    : receiver
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(
+      masm, eax.bit() | ecx.bit() | edx.bit(), 0, false);
+}
+
+
+void Debug::GenerateKeyedLoadICDebugBreak(MacroAssembler* masm) {
+  // Register state for keyed IC load call (from ic-ia32.cc).
+  // ----------- S t a t e -------------
+  //  -- edx    : receiver
+  //  -- eax    : key
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, eax.bit() | edx.bit(), 0, false);
+}
+
+
+void Debug::GenerateKeyedStoreICDebugBreak(MacroAssembler* masm) {
+  // Register state for keyed IC load call (from ic-ia32.cc).
+  // ----------- S t a t e -------------
+  //  -- eax    : value
+  //  -- ecx    : key
+  //  -- edx    : receiver
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(
+      masm, eax.bit() | ecx.bit() | edx.bit(), 0, false);
+}
+
+
+void Debug::GenerateCallICDebugBreak(MacroAssembler* masm) {
+  // Register state for keyed IC call call (from ic-ia32.cc)
+  // ----------- S t a t e -------------
+  //  -- ecx: name
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, ecx.bit(), 0, false);
+}
+
+
+void Debug::GenerateConstructCallDebugBreak(MacroAssembler* masm) {
+  // Register state just before return from JS function (from codegen-ia32.cc).
+  // eax is the actual number of arguments not encoded as a smi see comment
+  // above IC call.
+  // ----------- S t a t e -------------
+  //  -- eax: number of arguments (not smi)
+  //  -- edi: constructor function
+  // -----------------------------------
+  // The number of arguments in eax is not smi encoded.
+  Generate_DebugBreakCallHelper(masm, edi.bit(), eax.bit(), false);
+}
+
+
+void Debug::GenerateReturnDebugBreak(MacroAssembler* masm) {
+  // Register state just before return from JS function (from codegen-ia32.cc).
+  // ----------- S t a t e -------------
+  //  -- eax: return value
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, eax.bit(), 0, true);
+}
+
+
+void Debug::GenerateStubNoRegistersDebugBreak(MacroAssembler* masm) {
+  // Register state for stub CallFunction (from CallFunctionStub in ic-ia32.cc).
+  // ----------- S t a t e -------------
+  //  No registers used on entry.
+  // -----------------------------------
+  Generate_DebugBreakCallHelper(masm, 0, 0, false);
+}
+
+
+void Debug::GenerateSlot(MacroAssembler* masm) {
+  // Generate enough nop's to make space for a call instruction.
+  Label check_codesize;
+  __ bind(&check_codesize);
+  __ RecordDebugBreakSlot();
+  for (int i = 0; i < Assembler::kDebugBreakSlotLength; i++) {
+    __ nop();
+  }
+  ASSERT_EQ(Assembler::kDebugBreakSlotLength,
+            masm->SizeOfCodeGeneratedSince(&check_codesize));
+}
+
+
+void Debug::GenerateSlotDebugBreak(MacroAssembler* masm) {
+  // In the places where a debug break slot is inserted no registers can contain
+  // object pointers.
+  Generate_DebugBreakCallHelper(masm, 0, 0, true);
+}
+
+
+void Debug::GeneratePlainReturnLiveEdit(MacroAssembler* masm) {
+  masm->ret(0);
+}
+
+
+void Debug::GenerateFrameDropperLiveEdit(MacroAssembler* masm) {
+  ExternalReference restarter_frame_function_slot =
+      ExternalReference(Debug_Address::RestarterFrameFunctionPointer());
+  __ mov(Operand::StaticVariable(restarter_frame_function_slot), Immediate(0));
+
+  // We do not know our frame height, but set esp based on ebp.
+  __ lea(esp, Operand(ebp, -1 * kPointerSize));
+
+  __ pop(edi);  // Function.
+  __ pop(ebp);
+
+  // Load context from the function.
+  __ mov(esi, FieldOperand(edi, JSFunction::kContextOffset));
+
+  // Get function code.
+  __ mov(edx, FieldOperand(edi, JSFunction::kSharedFunctionInfoOffset));
+  __ mov(edx, FieldOperand(edx, SharedFunctionInfo::kCodeOffset));
+  __ lea(edx, FieldOperand(edx, Code::kHeaderSize));
+
+  // Re-run JSFunction, edi is function, esi is context.
+  __ jmp(Operand(edx));
+}
+
+const bool Debug::kFrameDropperSupported = true;
+
+#undef __
+
+#endif  // ENABLE_DEBUGGER_SUPPORT
+
+} }  // namespace v8::internal
+
+#endif  // V8_TARGET_ARCH_IA32

data/ext/v8/upstream/3.1.8/src/ia32/deoptimizer-ia32.cc

@@ -0,0 +1,664 @@
+// Copyright 2011 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+//       notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+//       copyright notice, this list of conditions and the following
+//       disclaimer in the documentation and/or other materials provided
+//       with the distribution.
+//     * Neither the name of Google Inc. nor the names of its
+//       contributors may be used to endorse or promote products derived
+//       from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_IA32)
+
+#include "codegen.h"
+#include "deoptimizer.h"
+#include "full-codegen.h"
+#include "safepoint-table.h"
+
+namespace v8 {
+namespace internal {
+
+int Deoptimizer::table_entry_size_ = 10;
+
+
+int Deoptimizer::patch_size() {
+  return Assembler::kCallInstructionLength;
+}
+
+
+static void ZapCodeRange(Address start, Address end) {
+#ifdef DEBUG
+  ASSERT(start <= end);
+  int size = end - start;
+  CodePatcher destroyer(start, size);
+  while (size-- > 0) destroyer.masm()->int3();
+#endif
+}
+
+
+void Deoptimizer::DeoptimizeFunction(JSFunction* function) {
+  AssertNoAllocation no_allocation;
+
+  if (!function->IsOptimized()) return;
+
+  // Get the optimized code.
+  Code* code = function->code();
+  Address code_start_address = code->instruction_start();
+
+  // We will overwrite the code's relocation info in-place. Relocation info
+  // is written backward. The relocation info is the payload of a byte
+  // array.  Later on we will slide this to the start of the byte array and
+  // create a filler object in the remaining space.
+  ByteArray* reloc_info = code->relocation_info();
+  Address reloc_end_address = reloc_info->address() + reloc_info->Size();
+  RelocInfoWriter reloc_info_writer(reloc_end_address, code_start_address);
+
+  // For each return after a safepoint insert a call to the corresponding
+  // deoptimization entry.  Since the call is a relative encoding, write new
+  // reloc info.  We do not need any of the existing reloc info because the
+  // existing code will not be used again (we zap it in debug builds).
+  SafepointTable table(code);
+  Address prev_address = code_start_address;
+  for (unsigned i = 0; i < table.length(); ++i) {
+    Address curr_address = code_start_address + table.GetPcOffset(i);
+    ASSERT_GE(curr_address, prev_address);
+    ZapCodeRange(prev_address, curr_address);
+
+    SafepointEntry safepoint_entry = table.GetEntry(i);
+    int deoptimization_index = safepoint_entry.deoptimization_index();
+    if (deoptimization_index != Safepoint::kNoDeoptimizationIndex) {
+      // The gap code is needed to get to the state expected at the bailout.
+      curr_address += safepoint_entry.gap_code_size();
+
+      CodePatcher patcher(curr_address, patch_size());
+      Address deopt_entry = GetDeoptimizationEntry(deoptimization_index, LAZY);
+      patcher.masm()->call(deopt_entry, RelocInfo::NONE);
+
+      // We use RUNTIME_ENTRY for deoptimization bailouts.
+      RelocInfo rinfo(curr_address + 1,  // 1 after the call opcode.
+                      RelocInfo::RUNTIME_ENTRY,
+                      reinterpret_cast<intptr_t>(deopt_entry));
+      reloc_info_writer.Write(&rinfo);
+      ASSERT_GE(reloc_info_writer.pos(),
+                reloc_info->address() + ByteArray::kHeaderSize);
+      curr_address += patch_size();
+    }
+    prev_address = curr_address;
+  }
+  ZapCodeRange(prev_address,
+               code_start_address + code->safepoint_table_offset());
+
+  // Move the relocation info to the beginning of the byte array.
+  int new_reloc_size = reloc_end_address - reloc_info_writer.pos();
+  memmove(code->relocation_start(), reloc_info_writer.pos(), new_reloc_size);
+
+  // The relocation info is in place, update the size.
+  reloc_info->set_length(new_reloc_size);
+
+  // Handle the junk part after the new relocation info. We will create
+  // a non-live object in the extra space at the end of the former reloc info.
+  Address junk_address = reloc_info->address() + reloc_info->Size();
+  ASSERT(junk_address <= reloc_end_address);
+  Heap::CreateFillerObjectAt(junk_address, reloc_end_address - junk_address);
+
+  // Add the deoptimizing code to the list.
+  DeoptimizingCodeListNode* node = new DeoptimizingCodeListNode(code);
+  node->set_next(deoptimizing_code_list_);
+  deoptimizing_code_list_ = node;
+
+  // Set the code for the function to non-optimized version.
+  function->ReplaceCode(function->shared()->code());
+
+  if (FLAG_trace_deopt) {
+    PrintF("[forced deoptimization: ");
+    function->PrintName();
+    PrintF(" / %x]\n", reinterpret_cast<uint32_t>(function));
+  }
+}
+
+
+void Deoptimizer::PatchStackCheckCodeAt(Address pc_after,
+                                        Code* check_code,
+                                        Code* replacement_code) {
+  Address call_target_address = pc_after - kIntSize;
+  ASSERT(check_code->entry() ==
+         Assembler::target_address_at(call_target_address));
+  // The stack check code matches the pattern:
+  //
+  //     cmp esp, <limit>
+  //     jae ok
+  //     call <stack guard>
+  //     test eax, <loop nesting depth>
+  // ok: ...
+  //
+  // We will patch away the branch so the code is:
+  //
+  //     cmp esp, <limit>  ;; Not changed
+  //     nop
+  //     nop
+  //     call <on-stack replacment>
+  //     test eax, <loop nesting depth>
+  // ok:
+  ASSERT(*(call_target_address - 3) == 0x73 &&  // jae
+         *(call_target_address - 2) == 0x07 &&  // offset
+         *(call_target_address - 1) == 0xe8);   // call
+  *(call_target_address - 3) = 0x90;  // nop
+  *(call_target_address - 2) = 0x90;  // nop
+  Assembler::set_target_address_at(call_target_address,
+                                   replacement_code->entry());
+}
+
+
+void Deoptimizer::RevertStackCheckCodeAt(Address pc_after,
+                                         Code* check_code,
+                                         Code* replacement_code) {
+  Address call_target_address = pc_after - kIntSize;
+  ASSERT(replacement_code->entry() ==
+         Assembler::target_address_at(call_target_address));
+  // Replace the nops from patching (Deoptimizer::PatchStackCheckCode) to
+  // restore the conditional branch.
+  ASSERT(*(call_target_address - 3) == 0x90 &&  // nop
+         *(call_target_address - 2) == 0x90 &&  // nop
+         *(call_target_address - 1) == 0xe8);   // call
+  *(call_target_address - 3) = 0x73;  // jae
+  *(call_target_address - 2) = 0x07;  // offset
+  Assembler::set_target_address_at(call_target_address,
+                                   check_code->entry());
+}
+
+
+static int LookupBailoutId(DeoptimizationInputData* data, unsigned ast_id) {
+  ByteArray* translations = data->TranslationByteArray();
+  int length = data->DeoptCount();
+  for (int i = 0; i < length; i++) {
+    if (static_cast<unsigned>(data->AstId(i)->value()) == ast_id) {
+      TranslationIterator it(translations,  data->TranslationIndex(i)->value());
+      int value = it.Next();
+      ASSERT(Translation::BEGIN == static_cast<Translation::Opcode>(value));
+      // Read the number of frames.
+      value = it.Next();
+      if (value == 1) return i;
+    }
+  }
+  UNREACHABLE();
+  return -1;
+}
+
+
+void Deoptimizer::DoComputeOsrOutputFrame() {
+  DeoptimizationInputData* data = DeoptimizationInputData::cast(
+      optimized_code_->deoptimization_data());
+  unsigned ast_id = data->OsrAstId()->value();
+  // TODO(kasperl): This should not be the bailout_id_. It should be
+  // the ast id. Confusing.
+  ASSERT(bailout_id_ == ast_id);
+
+  int bailout_id = LookupBailoutId(data, ast_id);
+  unsigned translation_index = data->TranslationIndex(bailout_id)->value();
+  ByteArray* translations = data->TranslationByteArray();
+
+  TranslationIterator iterator(translations, translation_index);
+  Translation::Opcode opcode =
+      static_cast<Translation::Opcode>(iterator.Next());
+  ASSERT(Translation::BEGIN == opcode);
+  USE(opcode);
+  int count = iterator.Next();
+  ASSERT(count == 1);
+  USE(count);
+
+  opcode = static_cast<Translation::Opcode>(iterator.Next());
+  USE(opcode);
+  ASSERT(Translation::FRAME == opcode);
+  unsigned node_id = iterator.Next();
+  USE(node_id);
+  ASSERT(node_id == ast_id);
+  JSFunction* function = JSFunction::cast(ComputeLiteral(iterator.Next()));
+  USE(function);
+  ASSERT(function == function_);
+  unsigned height = iterator.Next();
+  unsigned height_in_bytes = height * kPointerSize;
+  USE(height_in_bytes);
+
+  unsigned fixed_size = ComputeFixedSize(function_);
+  unsigned input_frame_size = input_->GetFrameSize();
+  ASSERT(fixed_size + height_in_bytes == input_frame_size);
+
+  unsigned stack_slot_size = optimized_code_->stack_slots() * kPointerSize;
+  unsigned outgoing_height = data->ArgumentsStackHeight(bailout_id)->value();
+  unsigned outgoing_size = outgoing_height * kPointerSize;
+  unsigned output_frame_size = fixed_size + stack_slot_size + outgoing_size;
+  ASSERT(outgoing_size == 0);  // OSR does not happen in the middle of a call.
+
+  if (FLAG_trace_osr) {
+    PrintF("[on-stack replacement: begin 0x%08" V8PRIxPTR " ",
+           reinterpret_cast<intptr_t>(function_));
+    function_->PrintName();
+    PrintF(" => node=%u, frame=%d->%d]\n",
+           ast_id,
+           input_frame_size,
+           output_frame_size);
+  }
+
+  // There's only one output frame in the OSR case.
+  output_count_ = 1;
+  output_ = new FrameDescription*[1];
+  output_[0] = new(output_frame_size) FrameDescription(
+      output_frame_size, function_);
+
+  // Clear the incoming parameters in the optimized frame to avoid
+  // confusing the garbage collector.
+  unsigned output_offset = output_frame_size - kPointerSize;
+  int parameter_count = function_->shared()->formal_parameter_count() + 1;
+  for (int i = 0; i < parameter_count; ++i) {
+    output_[0]->SetFrameSlot(output_offset, 0);
+    output_offset -= kPointerSize;
+  }
+
+  // Translate the incoming parameters. This may overwrite some of the
+  // incoming argument slots we've just cleared.
+  int input_offset = input_frame_size - kPointerSize;
+  bool ok = true;
+  int limit = input_offset - (parameter_count * kPointerSize);
+  while (ok && input_offset > limit) {
+    ok = DoOsrTranslateCommand(&iterator, &input_offset);
+  }
+
+  // There are no translation commands for the caller's pc and fp, the
+  // context, and the function.  Set them up explicitly.
+  for (int i = 0; ok && i < 4; i++) {
+    uint32_t input_value = input_->GetFrameSlot(input_offset);
+    if (FLAG_trace_osr) {
+      PrintF("    [esp + %d] <- 0x%08x ; [esp + %d] (fixed part)\n",
+             output_offset,
+             input_value,
+             input_offset);
+    }
+    output_[0]->SetFrameSlot(output_offset, input_->GetFrameSlot(input_offset));
+    input_offset -= kPointerSize;
+    output_offset -= kPointerSize;
+  }
+
+  // Translate the rest of the frame.
+  while (ok && input_offset >= 0) {
+    ok = DoOsrTranslateCommand(&iterator, &input_offset);
+  }
+
+  // If translation of any command failed, continue using the input frame.
+  if (!ok) {
+    delete output_[0];
+    output_[0] = input_;
+    output_[0]->SetPc(reinterpret_cast<uint32_t>(from_));
+  } else {
+    // Setup the frame pointer and the context pointer.
+    output_[0]->SetRegister(ebp.code(), input_->GetRegister(ebp.code()));
+    output_[0]->SetRegister(esi.code(), input_->GetRegister(esi.code()));
+
+    unsigned pc_offset = data->OsrPcOffset()->value();
+    uint32_t pc = reinterpret_cast<uint32_t>(
+        optimized_code_->entry() + pc_offset);
+    output_[0]->SetPc(pc);
+  }
+  Code* continuation = Builtins::builtin(Builtins::NotifyOSR);
+  output_[0]->SetContinuation(
+      reinterpret_cast<uint32_t>(continuation->entry()));
+
+  if (FLAG_trace_osr) {
+    PrintF("[on-stack replacement translation %s: 0x%08" V8PRIxPTR " ",
+           ok ? "finished" : "aborted",
+           reinterpret_cast<intptr_t>(function));
+    function->PrintName();
+    PrintF(" => pc=0x%0x]\n", output_[0]->GetPc());
+  }
+}
+
+
+void Deoptimizer::DoComputeFrame(TranslationIterator* iterator,
+                                 int frame_index) {
+  // Read the ast node id, function, and frame height for this output frame.
+  Translation::Opcode opcode =
+      static_cast<Translation::Opcode>(iterator->Next());
+  USE(opcode);
+  ASSERT(Translation::FRAME == opcode);
+  int node_id = iterator->Next();
+  JSFunction* function = JSFunction::cast(ComputeLiteral(iterator->Next()));
+  unsigned height = iterator->Next();
+  unsigned height_in_bytes = height * kPointerSize;
+  if (FLAG_trace_deopt) {
+    PrintF("  translating ");
+    function->PrintName();
+    PrintF(" => node=%d, height=%d\n", node_id, height_in_bytes);
+  }
+
+  // The 'fixed' part of the frame consists of the incoming parameters and
+  // the part described by JavaScriptFrameConstants.
+  unsigned fixed_frame_size = ComputeFixedSize(function);
+  unsigned input_frame_size = input_->GetFrameSize();
+  unsigned output_frame_size = height_in_bytes + fixed_frame_size;
+
+  // Allocate and store the output frame description.
+  FrameDescription* output_frame =
+      new(output_frame_size) FrameDescription(output_frame_size, function);
+
+  bool is_bottommost = (0 == frame_index);
+  bool is_topmost = (output_count_ - 1 == frame_index);
+  ASSERT(frame_index >= 0 && frame_index < output_count_);
+  ASSERT(output_[frame_index] == NULL);
+  output_[frame_index] = output_frame;
+
+  // The top address for the bottommost output frame can be computed from
+  // the input frame pointer and the output frame's height.  For all
+  // subsequent output frames, it can be computed from the previous one's
+  // top address and the current frame's size.
+  uint32_t top_address;
+  if (is_bottommost) {
+    // 2 = context and function in the frame.
+    top_address =
+        input_->GetRegister(ebp.code()) - (2 * kPointerSize) - height_in_bytes;
+  } else {
+    top_address = output_[frame_index - 1]->GetTop() - output_frame_size;
+  }
+  output_frame->SetTop(top_address);
+
+  // Compute the incoming parameter translation.
+  int parameter_count = function->shared()->formal_parameter_count() + 1;
+  unsigned output_offset = output_frame_size;
+  unsigned input_offset = input_frame_size;
+  for (int i = 0; i < parameter_count; ++i) {
+    output_offset -= kPointerSize;
+    DoTranslateCommand(iterator, frame_index, output_offset);
+  }
+  input_offset -= (parameter_count * kPointerSize);
+
+  // There are no translation commands for the caller's pc and fp, the
+  // context, and the function.  Synthesize their values and set them up
+  // explicitly.
+  //
+  // The caller's pc for the bottommost output frame is the same as in the
+  // input frame.  For all subsequent output frames, it can be read from the
+  // previous one.  This frame's pc can be computed from the non-optimized
+  // function code and AST id of the bailout.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  intptr_t value;
+  if (is_bottommost) {
+    value = input_->GetFrameSlot(input_offset);
+  } else {
+    value = output_[frame_index - 1]->GetPc();
+  }
+  output_frame->SetFrameSlot(output_offset, value);
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; caller's pc\n",
+           top_address + output_offset, output_offset, value);
+  }
+
+  // The caller's frame pointer for the bottommost output frame is the same
+  // as in the input frame.  For all subsequent output frames, it can be
+  // read from the previous one.  Also compute and set this frame's frame
+  // pointer.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  if (is_bottommost) {
+    value = input_->GetFrameSlot(input_offset);
+  } else {
+    value = output_[frame_index - 1]->GetFp();
+  }
+  output_frame->SetFrameSlot(output_offset, value);
+  intptr_t fp_value = top_address + output_offset;
+  ASSERT(!is_bottommost || input_->GetRegister(ebp.code()) == fp_value);
+  output_frame->SetFp(fp_value);
+  if (is_topmost) output_frame->SetRegister(ebp.code(), fp_value);
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; caller's fp\n",
+           fp_value, output_offset, value);
+  }
+
+  // For the bottommost output frame the context can be gotten from the input
+  // frame. For all subsequent output frames it can be gotten from the function
+  // so long as we don't inline functions that need local contexts.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  if (is_bottommost) {
+    value = input_->GetFrameSlot(input_offset);
+  } else {
+    value = reinterpret_cast<uint32_t>(function->context());
+  }
+  output_frame->SetFrameSlot(output_offset, value);
+  if (is_topmost) output_frame->SetRegister(esi.code(), value);
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; context\n",
+           top_address + output_offset, output_offset, value);
+  }
+
+  // The function was mentioned explicitly in the BEGIN_FRAME.
+  output_offset -= kPointerSize;
+  input_offset -= kPointerSize;
+  value = reinterpret_cast<uint32_t>(function);
+  // The function for the bottommost output frame should also agree with the
+  // input frame.
+  ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value);
+  output_frame->SetFrameSlot(output_offset, value);
+  if (FLAG_trace_deopt) {
+    PrintF("    0x%08x: [top + %d] <- 0x%08x ; function\n",
+           top_address + output_offset, output_offset, value);
+  }
+
+  // Translate the rest of the frame.
+  for (unsigned i = 0; i < height; ++i) {
+    output_offset -= kPointerSize;
+    DoTranslateCommand(iterator, frame_index, output_offset);
+  }
+  ASSERT(0 == output_offset);
+
+  // Compute this frame's PC, state, and continuation.
+  Code* non_optimized_code = function->shared()->code();
+  FixedArray* raw_data = non_optimized_code->deoptimization_data();
+  DeoptimizationOutputData* data = DeoptimizationOutputData::cast(raw_data);
+  Address start = non_optimized_code->instruction_start();
+  unsigned pc_and_state = GetOutputInfo(data, node_id, function->shared());
+  unsigned pc_offset = FullCodeGenerator::PcField::decode(pc_and_state);
+  uint32_t pc_value = reinterpret_cast<uint32_t>(start + pc_offset);
+  output_frame->SetPc(pc_value);
+
+  FullCodeGenerator::State state =
+      FullCodeGenerator::StateField::decode(pc_and_state);
+  output_frame->SetState(Smi::FromInt(state));
+
+  // Set the continuation for the topmost frame.
+  if (is_topmost) {
+    Code* continuation = (bailout_type_ == EAGER)
+        ? Builtins::builtin(Builtins::NotifyDeoptimized)
+        : Builtins::builtin(Builtins::NotifyLazyDeoptimized);
+    output_frame->SetContinuation(
+        reinterpret_cast<uint32_t>(continuation->entry()));
+  }
+
+  if (output_count_ - 1 == frame_index) iterator->Done();
+}
+
+
+#define __ masm()->
+
+void Deoptimizer::EntryGenerator::Generate() {
+  GeneratePrologue();
+  CpuFeatures::Scope scope(SSE2);
+
+  // Save all general purpose registers before messing with them.
+  const int kNumberOfRegisters = Register::kNumRegisters;
+
+  const int kDoubleRegsSize = kDoubleSize *
+                              XMMRegister::kNumAllocatableRegisters;
+  __ sub(Operand(esp), Immediate(kDoubleRegsSize));
+  for (int i = 0; i < XMMRegister::kNumAllocatableRegisters; ++i) {
+    XMMRegister xmm_reg = XMMRegister::FromAllocationIndex(i);
+    int offset = i * kDoubleSize;
+    __ movdbl(Operand(esp, offset), xmm_reg);
+  }
+
+  __ pushad();
+
+  const int kSavedRegistersAreaSize = kNumberOfRegisters * kPointerSize +
+                                      kDoubleRegsSize;
+
+  // Get the bailout id from the stack.
+  __ mov(ebx, Operand(esp, kSavedRegistersAreaSize));
+
+  // Get the address of the location in the code object if possible
+  // and compute the fp-to-sp delta in register edx.
+  if (type() == EAGER) {
+    __ Set(ecx, Immediate(0));
+    __ lea(edx, Operand(esp, kSavedRegistersAreaSize + 1 * kPointerSize));
+  } else {
+    __ mov(ecx, Operand(esp, kSavedRegistersAreaSize + 1 * kPointerSize));
+    __ lea(edx, Operand(esp, kSavedRegistersAreaSize + 2 * kPointerSize));
+  }
+  __ sub(edx, Operand(ebp));
+  __ neg(edx);
+
+  // Allocate a new deoptimizer object.
+  __ PrepareCallCFunction(5, eax);
+  __ mov(eax, Operand(ebp, JavaScriptFrameConstants::kFunctionOffset));
+  __ mov(Operand(esp, 0 * kPointerSize), eax);  // Function.
+  __ mov(Operand(esp, 1 * kPointerSize), Immediate(type()));  // Bailout type.
+  __ mov(Operand(esp, 2 * kPointerSize), ebx);  // Bailout id.
+  __ mov(Operand(esp, 3 * kPointerSize), ecx);  // Code address or 0.
+  __ mov(Operand(esp, 4 * kPointerSize), edx);  // Fp-to-sp delta.
+  __ CallCFunction(ExternalReference::new_deoptimizer_function(), 5);
+
+  // Preserve deoptimizer object in register eax and get the input
+  // frame descriptor pointer.
+  __ mov(ebx, Operand(eax, Deoptimizer::input_offset()));
+
+  // Fill in the input registers.
+  for (int i = kNumberOfRegisters - 1; i >= 0; i--) {
+    int offset = (i * kPointerSize) + FrameDescription::registers_offset();
+    __ pop(Operand(ebx, offset));
+  }
+
+  // Fill in the double input registers.
+  int double_regs_offset = FrameDescription::double_registers_offset();
+  for (int i = 0; i < XMMRegister::kNumAllocatableRegisters; ++i) {
+    int dst_offset = i * kDoubleSize + double_regs_offset;
+    int src_offset = i * kDoubleSize;
+    __ movdbl(xmm0, Operand(esp, src_offset));
+    __ movdbl(Operand(ebx, dst_offset), xmm0);
+  }
+
+  // Remove the bailout id and the double registers from the stack.
+  if (type() == EAGER) {
+    __ add(Operand(esp), Immediate(kDoubleRegsSize + kPointerSize));
+  } else {
+    __ add(Operand(esp), Immediate(kDoubleRegsSize + 2 * kPointerSize));
+  }
+
+  // Compute a pointer to the unwinding limit in register ecx; that is
+  // the first stack slot not part of the input frame.
+  __ mov(ecx, Operand(ebx, FrameDescription::frame_size_offset()));
+  __ add(ecx, Operand(esp));
+
+  // Unwind the stack down to - but not including - the unwinding
+  // limit and copy the contents of the activation frame to the input
+  // frame description.
+  __ lea(edx, Operand(ebx, FrameDescription::frame_content_offset()));
+  Label pop_loop;
+  __ bind(&pop_loop);
+  __ pop(Operand(edx, 0));
+  __ add(Operand(edx), Immediate(sizeof(uint32_t)));
+  __ cmp(ecx, Operand(esp));
+  __ j(not_equal, &pop_loop);
+
+  // Compute the output frame in the deoptimizer.
+  __ push(eax);
+  __ PrepareCallCFunction(1, ebx);
+  __ mov(Operand(esp, 0 * kPointerSize), eax);
+  __ CallCFunction(ExternalReference::compute_output_frames_function(), 1);
+  __ pop(eax);
+
+  // Replace the current frame with the output frames.
+  Label outer_push_loop, inner_push_loop;
+  // Outer loop state: eax = current FrameDescription**, edx = one past the
+  // last FrameDescription**.
+  __ mov(edx, Operand(eax, Deoptimizer::output_count_offset()));
+  __ mov(eax, Operand(eax, Deoptimizer::output_offset()));
+  __ lea(edx, Operand(eax, edx, times_4, 0));
+  __ bind(&outer_push_loop);
+  // Inner loop state: ebx = current FrameDescription*, ecx = loop index.
+  __ mov(ebx, Operand(eax, 0));
+  __ mov(ecx, Operand(ebx, FrameDescription::frame_size_offset()));
+  __ bind(&inner_push_loop);
+  __ sub(Operand(ecx), Immediate(sizeof(uint32_t)));
+  __ push(Operand(ebx, ecx, times_1, FrameDescription::frame_content_offset()));
+  __ test(ecx, Operand(ecx));
+  __ j(not_zero, &inner_push_loop);
+  __ add(Operand(eax), Immediate(kPointerSize));
+  __ cmp(eax, Operand(edx));
+  __ j(below, &outer_push_loop);
+
+  // In case of OSR, we have to restore the XMM registers.
+  if (type() == OSR) {
+    for (int i = 0; i < XMMRegister::kNumAllocatableRegisters; ++i) {
+      XMMRegister xmm_reg = XMMRegister::FromAllocationIndex(i);
+      int src_offset = i * kDoubleSize + double_regs_offset;
+      __ movdbl(xmm_reg, Operand(ebx, src_offset));
+    }
+  }
+
+  // Push state, pc, and continuation from the last output frame.
+  if (type() != OSR) {
+    __ push(Operand(ebx, FrameDescription::state_offset()));
+  }
+  __ push(Operand(ebx, FrameDescription::pc_offset()));
+  __ push(Operand(ebx, FrameDescription::continuation_offset()));
+
+
+  // Push the registers from the last output frame.
+  for (int i = 0; i < kNumberOfRegisters; i++) {
+    int offset = (i * kPointerSize) + FrameDescription::registers_offset();
+    __ push(Operand(ebx, offset));
+  }
+
+  // Restore the registers from the stack.
+  __ popad();
+
+  // Return to the continuation point.
+  __ ret(0);
+}
+
+
+void Deoptimizer::TableEntryGenerator::GeneratePrologue() {
+  // Create a sequence of deoptimization entries.
+  Label done;
+  for (int i = 0; i < count(); i++) {
+    int start = masm()->pc_offset();
+    USE(start);
+    __ push_imm32(i);
+    __ jmp(&done);
+    ASSERT(masm()->pc_offset() - start == table_entry_size_);
+  }
+  __ bind(&done);
+}
+
+#undef __
+
+
+} }  // namespace v8::internal
+
+#endif  // V8_TARGET_ARCH_IA32