therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/2.3.3/src/arm/disasm-arm.cc

@@ -1,1459 +0,0 @@
-// Copyright 2010 the V8 project authors. All rights reserved.
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-//       notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-//       copyright notice, this list of conditions and the following
-//       disclaimer in the documentation and/or other materials provided
-//       with the distribution.
-//     * Neither the name of Google Inc. nor the names of its
-//       contributors may be used to endorse or promote products derived
-//       from this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// A Disassembler object is used to disassemble a block of code instruction by
-// instruction. The default implementation of the NameConverter object can be
-// overriden to modify register names or to do symbol lookup on addresses.
-//
-// The example below will disassemble a block of code and print it to stdout.
-//
-//   NameConverter converter;
-//   Disassembler d(converter);
-//   for (byte* pc = begin; pc < end;) {
-//     v8::internal::EmbeddedVector<char, 256> buffer;
-//     byte* prev_pc = pc;
-//     pc += d.InstructionDecode(buffer, pc);
-//     printf("%p    %08x      %s\n",
-//            prev_pc, *reinterpret_cast<int32_t*>(prev_pc), buffer);
-//   }
-//
-// The Disassembler class also has a convenience method to disassemble a block
-// of code into a FILE*, meaning that the above functionality could also be
-// achieved by just calling Disassembler::Disassemble(stdout, begin, end);
-
-
-#include <assert.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <string.h>
-#ifndef WIN32
-#include <stdint.h>
-#endif
-
-#include "v8.h"
-
-#if defined(V8_TARGET_ARCH_ARM)
-
-#include "constants-arm.h"
-#include "disasm.h"
-#include "macro-assembler.h"
-#include "platform.h"
-
-
-namespace assembler {
-namespace arm {
-
-namespace v8i = v8::internal;
-
-
-//------------------------------------------------------------------------------
-
-// Decoder decodes and disassembles instructions into an output buffer.
-// It uses the converter to convert register names and call destinations into
-// more informative description.
-class Decoder {
- public:
-  Decoder(const disasm::NameConverter& converter,
-          v8::internal::Vector<char> out_buffer)
-    : converter_(converter),
-      out_buffer_(out_buffer),
-      out_buffer_pos_(0) {
-    out_buffer_[out_buffer_pos_] = '\0';
-  }
-
-  ~Decoder() {}
-
-  // Writes one disassembled instruction into 'buffer' (0-terminated).
-  // Returns the length of the disassembled machine instruction in bytes.
-  int InstructionDecode(byte* instruction);
-
- private:
-  // Bottleneck functions to print into the out_buffer.
-  void PrintChar(const char ch);
-  void Print(const char* str);
-
-  // Printing of common values.
-  void PrintRegister(int reg);
-  void PrintSRegister(int reg);
-  void PrintDRegister(int reg);
-  int FormatVFPRegister(Instr* instr, const char* format);
-  void PrintMovwMovt(Instr* instr);
-  int FormatVFPinstruction(Instr* instr, const char* format);
-  void PrintCondition(Instr* instr);
-  void PrintShiftRm(Instr* instr);
-  void PrintShiftImm(Instr* instr);
-  void PrintShiftSat(Instr* instr);
-  void PrintPU(Instr* instr);
-  void PrintSoftwareInterrupt(SoftwareInterruptCodes swi);
-
-  // Handle formatting of instructions and their options.
-  int FormatRegister(Instr* instr, const char* option);
-  int FormatOption(Instr* instr, const char* option);
-  void Format(Instr* instr, const char* format);
-  void Unknown(Instr* instr);
-
-  // Each of these functions decodes one particular instruction type, a 3-bit
-  // field in the instruction encoding.
-  // Types 0 and 1 are combined as they are largely the same except for the way
-  // they interpret the shifter operand.
-  void DecodeType01(Instr* instr);
-  void DecodeType2(Instr* instr);
-  void DecodeType3(Instr* instr);
-  void DecodeType4(Instr* instr);
-  void DecodeType5(Instr* instr);
-  void DecodeType6(Instr* instr);
-  void DecodeType7(Instr* instr);
-  void DecodeUnconditional(Instr* instr);
-  // For VFP support.
-  void DecodeTypeVFP(Instr* instr);
-  void DecodeType6CoprocessorIns(Instr* instr);
-
-  void DecodeVMOVBetweenCoreAndSinglePrecisionRegisters(Instr* instr);
-  void DecodeVCMP(Instr* instr);
-  void DecodeVCVTBetweenDoubleAndSingle(Instr* instr);
-  void DecodeVCVTBetweenFloatingPointAndInteger(Instr* instr);
-
-  const disasm::NameConverter& converter_;
-  v8::internal::Vector<char> out_buffer_;
-  int out_buffer_pos_;
-
-  DISALLOW_COPY_AND_ASSIGN(Decoder);
-};
-
-
-// Support for assertions in the Decoder formatting functions.
-#define STRING_STARTS_WITH(string, compare_string) \
-  (strncmp(string, compare_string, strlen(compare_string)) == 0)
-
-
-// Append the ch to the output buffer.
-void Decoder::PrintChar(const char ch) {
-  out_buffer_[out_buffer_pos_++] = ch;
-}
-
-
-// Append the str to the output buffer.
-void Decoder::Print(const char* str) {
-  char cur = *str++;
-  while (cur != '\0' && (out_buffer_pos_ < (out_buffer_.length() - 1))) {
-    PrintChar(cur);
-    cur = *str++;
-  }
-  out_buffer_[out_buffer_pos_] = 0;
-}
-
-
-// These condition names are defined in a way to match the native disassembler
-// formatting. See for example the command "objdump -d <binary file>".
-static const char* cond_names[max_condition] = {
-  "eq", "ne", "cs" , "cc" , "mi" , "pl" , "vs" , "vc" ,
-  "hi", "ls", "ge", "lt", "gt", "le", "", "invalid",
-};
-
-
-// Print the condition guarding the instruction.
-void Decoder::PrintCondition(Instr* instr) {
-  Print(cond_names[instr->ConditionField()]);
-}
-
-
-// Print the register name according to the active name converter.
-void Decoder::PrintRegister(int reg) {
-  Print(converter_.NameOfCPURegister(reg));
-}
-
-// Print the VFP S register name according to the active name converter.
-void Decoder::PrintSRegister(int reg) {
-  Print(assembler::arm::VFPRegisters::Name(reg, false));
-}
-
-// Print the  VFP D register name according to the active name converter.
-void Decoder::PrintDRegister(int reg) {
-  Print(assembler::arm::VFPRegisters::Name(reg, true));
-}
-
-
-// These shift names are defined in a way to match the native disassembler
-// formatting. See for example the command "objdump -d <binary file>".
-static const char* shift_names[max_shift] = {
-  "lsl", "lsr", "asr", "ror"
-};
-
-
-// Print the register shift operands for the instruction. Generally used for
-// data processing instructions.
-void Decoder::PrintShiftRm(Instr* instr) {
-  Shift shift = instr->ShiftField();
-  int shift_amount = instr->ShiftAmountField();
-  int rm = instr->RmField();
-
-  PrintRegister(rm);
-
-  if ((instr->RegShiftField() == 0) && (shift == LSL) && (shift_amount == 0)) {
-    // Special case for using rm only.
-    return;
-  }
-  if (instr->RegShiftField() == 0) {
-    // by immediate
-    if ((shift == ROR) && (shift_amount == 0)) {
-      Print(", RRX");
-      return;
-    } else if (((shift == LSR) || (shift == ASR)) && (shift_amount == 0)) {
-      shift_amount = 32;
-    }
-    out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                         ", %s #%d",
-                                         shift_names[shift], shift_amount);
-  } else {
-    // by register
-    int rs = instr->RsField();
-    out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                         ", %s ", shift_names[shift]);
-    PrintRegister(rs);
-  }
-}
-
-
-// Print the immediate operand for the instruction. Generally used for data
-// processing instructions.
-void Decoder::PrintShiftImm(Instr* instr) {
-  int rotate = instr->RotateField() * 2;
-  int immed8 = instr->Immed8Field();
-  int imm = (immed8 >> rotate) | (immed8 << (32 - rotate));
-  out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                       "#%d", imm);
-}
-
-
-// Print the optional shift and immediate used by saturating instructions.
-void Decoder::PrintShiftSat(Instr* instr) {
-  int shift = instr->Bits(11, 7);
-  if (shift > 0) {
-    out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                         ", %s #%d",
-                                         shift_names[instr->Bit(6) * 2],
-                                         instr->Bits(11, 7));
-  }
-}
-
-
-// Print PU formatting to reduce complexity of FormatOption.
-void Decoder::PrintPU(Instr* instr) {
-  switch (instr->PUField()) {
-    case 0: {
-      Print("da");
-      break;
-    }
-    case 1: {
-      Print("ia");
-      break;
-    }
-    case 2: {
-      Print("db");
-      break;
-    }
-    case 3: {
-      Print("ib");
-      break;
-    }
-    default: {
-      UNREACHABLE();
-      break;
-    }
-  }
-}
-
-
-// Print SoftwareInterrupt codes. Factoring this out reduces the complexity of
-// the FormatOption method.
-void Decoder::PrintSoftwareInterrupt(SoftwareInterruptCodes swi) {
-  switch (swi) {
-    case call_rt_redirected:
-      Print("call_rt_redirected");
-      return;
-    case break_point:
-      Print("break_point");
-      return;
-    default:
-      out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                           "%d",
-                                           swi);
-      return;
-  }
-}
-
-
-// Handle all register based formatting in this function to reduce the
-// complexity of FormatOption.
-int Decoder::FormatRegister(Instr* instr, const char* format) {
-  ASSERT(format[0] == 'r');
-  if (format[1] == 'n') {  // 'rn: Rn register
-    int reg = instr->RnField();
-    PrintRegister(reg);
-    return 2;
-  } else if (format[1] == 'd') {  // 'rd: Rd register
-    int reg = instr->RdField();
-    PrintRegister(reg);
-    return 2;
-  } else if (format[1] == 's') {  // 'rs: Rs register
-    int reg = instr->RsField();
-    PrintRegister(reg);
-    return 2;
-  } else if (format[1] == 'm') {  // 'rm: Rm register
-    int reg = instr->RmField();
-    PrintRegister(reg);
-    return 2;
-  } else if (format[1] == 't') {  // 'rt: Rt register
-    int reg = instr->RtField();
-    PrintRegister(reg);
-    return 2;
-  } else if (format[1] == 'l') {
-    // 'rlist: register list for load and store multiple instructions
-    ASSERT(STRING_STARTS_WITH(format, "rlist"));
-    int rlist = instr->RlistField();
-    int reg = 0;
-    Print("{");
-    // Print register list in ascending order, by scanning the bit mask.
-    while (rlist != 0) {
-      if ((rlist & 1) != 0) {
-        PrintRegister(reg);
-        if ((rlist >> 1) != 0) {
-          Print(", ");
-        }
-      }
-      reg++;
-      rlist >>= 1;
-    }
-    Print("}");
-    return 5;
-  }
-  UNREACHABLE();
-  return -1;
-}
-
-
-// Handle all VFP register based formatting in this function to reduce the
-// complexity of FormatOption.
-int Decoder::FormatVFPRegister(Instr* instr, const char* format) {
-  ASSERT((format[0] == 'S') || (format[0] == 'D'));
-
-  if (format[1] == 'n') {
-    int reg = instr->VnField();
-    if (format[0] == 'S') PrintSRegister(((reg << 1) | instr->NField()));
-    if (format[0] == 'D') PrintDRegister(reg);
-    return 2;
-  } else if (format[1] == 'm') {
-    int reg = instr->VmField();
-    if (format[0] == 'S') PrintSRegister(((reg << 1) | instr->MField()));
-    if (format[0] == 'D') PrintDRegister(reg);
-    return 2;
-  } else if (format[1] == 'd') {
-    int reg = instr->VdField();
-    if (format[0] == 'S') PrintSRegister(((reg << 1) | instr->DField()));
-    if (format[0] == 'D') PrintDRegister(reg);
-    return 2;
-  }
-
-  UNREACHABLE();
-  return -1;
-}
-
-
-int Decoder::FormatVFPinstruction(Instr* instr, const char* format) {
-    Print(format);
-    return 0;
-}
-
-
-// Print the movw or movt instruction.
-void Decoder::PrintMovwMovt(Instr* instr) {
-  int imm = instr->ImmedMovwMovtField();
-  int rd = instr->RdField();
-  PrintRegister(rd);
-  out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                       ", #%d", imm);
-}
-
-
-// FormatOption takes a formatting string and interprets it based on
-// the current instructions. The format string points to the first
-// character of the option string (the option escape has already been
-// consumed by the caller.)  FormatOption returns the number of
-// characters that were consumed from the formatting string.
-int Decoder::FormatOption(Instr* instr, const char* format) {
-  switch (format[0]) {
-    case 'a': {  // 'a: accumulate multiplies
-      if (instr->Bit(21) == 0) {
-        Print("ul");
-      } else {
-        Print("la");
-      }
-      return 1;
-    }
-    case 'b': {  // 'b: byte loads or stores
-      if (instr->HasB()) {
-        Print("b");
-      }
-      return 1;
-    }
-    case 'c': {  // 'cond: conditional execution
-      ASSERT(STRING_STARTS_WITH(format, "cond"));
-      PrintCondition(instr);
-      return 4;
-    }
-    case 'd': {  // 'd: vmov double immediate.
-      double d = instr->DoubleImmedVmov();
-      out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                           "#%g", d);
-      return 1;
-    }
-    case 'f': {  // 'f: bitfield instructions - v7 and above.
-      uint32_t lsbit = instr->Bits(11, 7);
-      uint32_t width = instr->Bits(20, 16) + 1;
-      if (instr->Bit(21) == 0) {
-        // BFC/BFI:
-        // Bits 20-16 represent most-significant bit. Covert to width.
-        width -= lsbit;
-        ASSERT(width > 0);
-      }
-      ASSERT((width + lsbit) <= 32);
-      out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                           "#%d, #%d", lsbit, width);
-      return 1;
-    }
-    case 'h': {  // 'h: halfword operation for extra loads and stores
-      if (instr->HasH()) {
-        Print("h");
-      } else {
-        Print("b");
-      }
-      return 1;
-    }
-    case 'i': {  // 'i: immediate value from adjacent bits.
-      // Expects tokens in the form imm%02d@%02d, ie. imm05@07, imm10@16
-      int width = (format[3] - '0') * 10 + (format[4] - '0');
-      int lsb   = (format[6] - '0') * 10 + (format[7] - '0');
-
-      ASSERT((width >= 1) && (width <= 32));
-      ASSERT((lsb >= 0) && (lsb <= 31));
-      ASSERT((width + lsb) <= 32);
-
-      out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                           "#%d",
-                                           instr->Bits(width + lsb - 1, lsb));
-      return 8;
-    }
-    case 'l': {  // 'l: branch and link
-      if (instr->HasLink()) {
-        Print("l");
-      }
-      return 1;
-    }
-    case 'm': {
-      if (format[1] == 'w') {
-        // 'mw: movt/movw instructions.
-        PrintMovwMovt(instr);
-        return 2;
-      }
-      if (format[1] == 'e') {  // 'memop: load/store instructions.
-        ASSERT(STRING_STARTS_WITH(format, "memop"));
-        if (instr->HasL()) {
-          Print("ldr");
-        } else if ((instr->Bits(27, 25) == 0) && (instr->Bit(20) == 0)) {
-          if (instr->Bits(7, 4) == 0xf) {
-            Print("strd");
-          } else {
-            Print("ldrd");
-          }
-        } else {
-          Print("str");
-        }
-        return 5;
-      }
-      // 'msg: for simulator break instructions
-      ASSERT(STRING_STARTS_WITH(format, "msg"));
-      byte* str =
-          reinterpret_cast<byte*>(instr->InstructionBits() & 0x0fffffff);
-      out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                           "%s", converter_.NameInCode(str));
-      return 3;
-    }
-    case 'o': {
-      if ((format[3] == '1') && (format[4] == '2')) {
-        // 'off12: 12-bit offset for load and store instructions
-        ASSERT(STRING_STARTS_WITH(format, "off12"));
-        out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                             "%d", instr->Offset12Field());
-        return 5;
-      } else if (format[3] == '0') {
-        // 'off0to3and8to19 16-bit immediate encoded in bits 19-8 and 3-0.
-        ASSERT(STRING_STARTS_WITH(format, "off0to3and8to19"));
-        out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                            "%d",
-                                            (instr->Bits(19, 8) << 4) +
-                                                instr->Bits(3, 0));
-        return 15;
-      }
-      // 'off8: 8-bit offset for extra load and store instructions
-      ASSERT(STRING_STARTS_WITH(format, "off8"));
-      int offs8 = (instr->ImmedHField() << 4) | instr->ImmedLField();
-      out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                           "%d", offs8);
-      return 4;
-    }
-    case 'p': {  // 'pu: P and U bits for load and store instructions
-      ASSERT(STRING_STARTS_WITH(format, "pu"));
-      PrintPU(instr);
-      return 2;
-    }
-    case 'r': {
-      return FormatRegister(instr, format);
-    }
-    case 's': {
-      if (format[1] == 'h') {  // 'shift_op or 'shift_rm or 'shift_sat.
-        if (format[6] == 'o') {  // 'shift_op
-          ASSERT(STRING_STARTS_WITH(format, "shift_op"));
-          if (instr->TypeField() == 0) {
-            PrintShiftRm(instr);
-          } else {
-            ASSERT(instr->TypeField() == 1);
-            PrintShiftImm(instr);
-          }
-          return 8;
-        } else if (format[6] == 's') {  // 'shift_sat.
-          ASSERT(STRING_STARTS_WITH(format, "shift_sat"));
-          PrintShiftSat(instr);
-          return 9;
-        } else {  // 'shift_rm
-          ASSERT(STRING_STARTS_WITH(format, "shift_rm"));
-          PrintShiftRm(instr);
-          return 8;
-        }
-      } else if (format[1] == 'w') {  // 'swi
-        ASSERT(STRING_STARTS_WITH(format, "swi"));
-        PrintSoftwareInterrupt(instr->SwiField());
-        return 3;
-      } else if (format[1] == 'i') {  // 'sign: signed extra loads and stores
-        ASSERT(STRING_STARTS_WITH(format, "sign"));
-        if (instr->HasSign()) {
-          Print("s");
-        }
-        return 4;
-      }
-      // 's: S field of data processing instructions
-      if (instr->HasS()) {
-        Print("s");
-      }
-      return 1;
-    }
-    case 't': {  // 'target: target of branch instructions
-      ASSERT(STRING_STARTS_WITH(format, "target"));
-      int off = (instr->SImmed24Field() << 2) + 8;
-      out_buffer_pos_ += v8i::OS::SNPrintF(
-          out_buffer_ + out_buffer_pos_,
-          "%+d -> %s",
-          off,
-          converter_.NameOfAddress(reinterpret_cast<byte*>(instr) + off));
-      return 6;
-    }
-    case 'u': {  // 'u: signed or unsigned multiplies
-      // The manual gets the meaning of bit 22 backwards in the multiply
-      // instruction overview on page A3.16.2.  The instructions that
-      // exist in u and s variants are the following:
-      // smull A4.1.87
-      // umull A4.1.129
-      // umlal A4.1.128
-      // smlal A4.1.76
-      // For these 0 means u and 1 means s.  As can be seen on their individual
-      // pages.  The other 18 mul instructions have the bit set or unset in
-      // arbitrary ways that are unrelated to the signedness of the instruction.
-      // None of these 18 instructions exist in both a 'u' and an 's' variant.
-
-      if (instr->Bit(22) == 0) {
-        Print("u");
-      } else {
-        Print("s");
-      }
-      return 1;
-    }
-    case 'v': {
-      return FormatVFPinstruction(instr, format);
-    }
-    case 'S':
-    case 'D': {
-      return FormatVFPRegister(instr, format);
-    }
-    case 'w': {  // 'w: W field of load and store instructions
-      if (instr->HasW()) {
-        Print("!");
-      }
-      return 1;
-    }
-    default: {
-      UNREACHABLE();
-      break;
-    }
-  }
-  UNREACHABLE();
-  return -1;
-}
-
-
-// Format takes a formatting string for a whole instruction and prints it into
-// the output buffer. All escaped options are handed to FormatOption to be
-// parsed further.
-void Decoder::Format(Instr* instr, const char* format) {
-  char cur = *format++;
-  while ((cur != 0) && (out_buffer_pos_ < (out_buffer_.length() - 1))) {
-    if (cur == '\'') {  // Single quote is used as the formatting escape.
-      format += FormatOption(instr, format);
-    } else {
-      out_buffer_[out_buffer_pos_++] = cur;
-    }
-    cur = *format++;
-  }
-  out_buffer_[out_buffer_pos_]  = '\0';
-}
-
-
-// For currently unimplemented decodings the disassembler calls Unknown(instr)
-// which will just print "unknown" of the instruction bits.
-void Decoder::Unknown(Instr* instr) {
-  Format(instr, "unknown");
-}
-
-
-void Decoder::DecodeType01(Instr* instr) {
-  int type = instr->TypeField();
-  if ((type == 0) && instr->IsSpecialType0()) {
-    // multiply instruction or extra loads and stores
-    if (instr->Bits(7, 4) == 9) {
-      if (instr->Bit(24) == 0) {
-        // multiply instructions
-        if (instr->Bit(23) == 0) {
-          if (instr->Bit(21) == 0) {
-            // The MUL instruction description (A 4.1.33) refers to Rd as being
-            // the destination for the operation, but it confusingly uses the
-            // Rn field to encode it.
-            Format(instr, "mul'cond's 'rn, 'rm, 'rs");
-          } else {
-            // The MLA instruction description (A 4.1.28) refers to the order
-            // of registers as "Rd, Rm, Rs, Rn". But confusingly it uses the
-            // Rn field to encode the Rd register and the Rd field to encode
-            // the Rn register.
-            Format(instr, "mla'cond's 'rn, 'rm, 'rs, 'rd");
-          }
-        } else {
-          // The signed/long multiply instructions use the terms RdHi and RdLo
-          // when referring to the target registers. They are mapped to the Rn
-          // and Rd fields as follows:
-          // RdLo == Rd field
-          // RdHi == Rn field
-          // The order of registers is: <RdLo>, <RdHi>, <Rm>, <Rs>
-          Format(instr, "'um'al'cond's 'rd, 'rn, 'rm, 'rs");
-        }
-      } else {
-        Unknown(instr);  // not used by V8
-      }
-    } else if ((instr->Bit(20) == 0) && ((instr->Bits(7, 4) & 0xd) == 0xd)) {
-      // ldrd, strd
-      switch (instr->PUField()) {
-        case 0: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond's 'rd, ['rn], -'rm");
-          } else {
-            Format(instr, "'memop'cond's 'rd, ['rn], #-'off8");
-          }
-          break;
-        }
-        case 1: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond's 'rd, ['rn], +'rm");
-          } else {
-            Format(instr, "'memop'cond's 'rd, ['rn], #+'off8");
-          }
-          break;
-        }
-        case 2: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond's 'rd, ['rn, -'rm]'w");
-          } else {
-            Format(instr, "'memop'cond's 'rd, ['rn, #-'off8]'w");
-          }
-          break;
-        }
-        case 3: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond's 'rd, ['rn, +'rm]'w");
-          } else {
-            Format(instr, "'memop'cond's 'rd, ['rn, #+'off8]'w");
-          }
-          break;
-        }
-        default: {
-          // The PU field is a 2-bit field.
-          UNREACHABLE();
-          break;
-        }
-      }
-    } else {
-      // extra load/store instructions
-      switch (instr->PUField()) {
-        case 0: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn], -'rm");
-          } else {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn], #-'off8");
-          }
-          break;
-        }
-        case 1: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn], +'rm");
-          } else {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn], #+'off8");
-          }
-          break;
-        }
-        case 2: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn, -'rm]'w");
-          } else {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn, #-'off8]'w");
-          }
-          break;
-        }
-        case 3: {
-          if (instr->Bit(22) == 0) {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn, +'rm]'w");
-          } else {
-            Format(instr, "'memop'cond'sign'h 'rd, ['rn, #+'off8]'w");
-          }
-          break;
-        }
-        default: {
-          // The PU field is a 2-bit field.
-          UNREACHABLE();
-          break;
-        }
-      }
-      return;
-    }
-  } else if ((type == 0) && instr->IsMiscType0()) {
-    if (instr->Bits(22, 21) == 1) {
-      switch (instr->Bits(7, 4)) {
-        case BX:
-          Format(instr, "bx'cond 'rm");
-          break;
-        case BLX:
-          Format(instr, "blx'cond 'rm");
-          break;
-        case BKPT:
-          Format(instr, "bkpt 'off0to3and8to19");
-          break;
-        default:
-          Unknown(instr);  // not used by V8
-          break;
-      }
-    } else if (instr->Bits(22, 21) == 3) {
-      switch (instr->Bits(7, 4)) {
-        case CLZ:
-          Format(instr, "clz'cond 'rd, 'rm");
-          break;
-        default:
-          Unknown(instr);  // not used by V8
-          break;
-      }
-    } else {
-      Unknown(instr);  // not used by V8
-    }
-  } else {
-    switch (instr->OpcodeField()) {
-      case AND: {
-        Format(instr, "and'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case EOR: {
-        Format(instr, "eor'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case SUB: {
-        Format(instr, "sub'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case RSB: {
-        Format(instr, "rsb'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case ADD: {
-        Format(instr, "add'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case ADC: {
-        Format(instr, "adc'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case SBC: {
-        Format(instr, "sbc'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case RSC: {
-        Format(instr, "rsc'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case TST: {
-        if (instr->HasS()) {
-          Format(instr, "tst'cond 'rn, 'shift_op");
-        } else {
-          Format(instr, "movw'cond 'mw");
-        }
-        break;
-      }
-      case TEQ: {
-        if (instr->HasS()) {
-          Format(instr, "teq'cond 'rn, 'shift_op");
-        } else {
-          // Other instructions matching this pattern are handled in the
-          // miscellaneous instructions part above.
-          UNREACHABLE();
-        }
-        break;
-      }
-      case CMP: {
-        if (instr->HasS()) {
-          Format(instr, "cmp'cond 'rn, 'shift_op");
-        } else {
-          Format(instr, "movt'cond 'mw");
-        }
-        break;
-      }
-      case CMN: {
-        if (instr->HasS()) {
-          Format(instr, "cmn'cond 'rn, 'shift_op");
-        } else {
-          // Other instructions matching this pattern are handled in the
-          // miscellaneous instructions part above.
-          UNREACHABLE();
-        }
-        break;
-      }
-      case ORR: {
-        Format(instr, "orr'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case MOV: {
-        Format(instr, "mov'cond's 'rd, 'shift_op");
-        break;
-      }
-      case BIC: {
-        Format(instr, "bic'cond's 'rd, 'rn, 'shift_op");
-        break;
-      }
-      case MVN: {
-        Format(instr, "mvn'cond's 'rd, 'shift_op");
-        break;
-      }
-      default: {
-        // The Opcode field is a 4-bit field.
-        UNREACHABLE();
-        break;
-      }
-    }
-  }
-}
-
-
-void Decoder::DecodeType2(Instr* instr) {
-  switch (instr->PUField()) {
-    case 0: {
-      if (instr->HasW()) {
-        Unknown(instr);  // not used in V8
-      }
-      Format(instr, "'memop'cond'b 'rd, ['rn], #-'off12");
-      break;
-    }
-    case 1: {
-      if (instr->HasW()) {
-        Unknown(instr);  // not used in V8
-      }
-      Format(instr, "'memop'cond'b 'rd, ['rn], #+'off12");
-      break;
-    }
-    case 2: {
-      Format(instr, "'memop'cond'b 'rd, ['rn, #-'off12]'w");
-      break;
-    }
-    case 3: {
-      Format(instr, "'memop'cond'b 'rd, ['rn, #+'off12]'w");
-      break;
-    }
-    default: {
-      // The PU field is a 2-bit field.
-      UNREACHABLE();
-      break;
-    }
-  }
-}
-
-
-void Decoder::DecodeType3(Instr* instr) {
-  switch (instr->PUField()) {
-    case 0: {
-      ASSERT(!instr->HasW());
-      Format(instr, "'memop'cond'b 'rd, ['rn], -'shift_rm");
-      break;
-    }
-    case 1: {
-      if (instr->HasW()) {
-        ASSERT(instr->Bits(5, 4) == 0x1);
-        if (instr->Bit(22) == 0x1) {
-          Format(instr, "usat 'rd, 'imm05@16, 'rm'shift_sat");
-        } else {
-          UNREACHABLE();  // SSAT.
-        }
-      } else {
-        Format(instr, "'memop'cond'b 'rd, ['rn], +'shift_rm");
-      }
-      break;
-    }
-    case 2: {
-      Format(instr, "'memop'cond'b 'rd, ['rn, -'shift_rm]'w");
-      break;
-    }
-    case 3: {
-      if (instr->HasW() && (instr->Bits(6, 4) == 0x5)) {
-        uint32_t widthminus1 = static_cast<uint32_t>(instr->Bits(20, 16));
-        uint32_t lsbit = static_cast<uint32_t>(instr->Bits(11, 7));
-        uint32_t msbit = widthminus1 + lsbit;
-        if (msbit <= 31) {
-          if (instr->Bit(22)) {
-            Format(instr, "ubfx'cond 'rd, 'rm, 'f");
-          } else {
-            Format(instr, "sbfx'cond 'rd, 'rm, 'f");
-          }
-        } else {
-          UNREACHABLE();
-        }
-      } else if (!instr->HasW() && (instr->Bits(6, 4) == 0x1)) {
-        uint32_t lsbit = static_cast<uint32_t>(instr->Bits(11, 7));
-        uint32_t msbit = static_cast<uint32_t>(instr->Bits(20, 16));
-        if (msbit >= lsbit) {
-          if (instr->RmField() == 15) {
-            Format(instr, "bfc'cond 'rd, 'f");
-          } else {
-            Format(instr, "bfi'cond 'rd, 'rm, 'f");
-          }
-        } else {
-          UNREACHABLE();
-        }
-      } else {
-        Format(instr, "'memop'cond'b 'rd, ['rn, +'shift_rm]'w");
-      }
-      break;
-    }
-    default: {
-      // The PU field is a 2-bit field.
-      UNREACHABLE();
-      break;
-    }
-  }
-}
-
-
-void Decoder::DecodeType4(Instr* instr) {
-  ASSERT(instr->Bit(22) == 0);  // Privileged mode currently not supported.
-  if (instr->HasL()) {
-    Format(instr, "ldm'cond'pu 'rn'w, 'rlist");
-  } else {
-    Format(instr, "stm'cond'pu 'rn'w, 'rlist");
-  }
-}
-
-
-void Decoder::DecodeType5(Instr* instr) {
-  Format(instr, "b'l'cond 'target");
-}
-
-
-void Decoder::DecodeType6(Instr* instr) {
-  DecodeType6CoprocessorIns(instr);
-}
-
-
-void Decoder::DecodeType7(Instr* instr) {
-  if (instr->Bit(24) == 1) {
-    Format(instr, "swi'cond 'swi");
-  } else {
-    DecodeTypeVFP(instr);
-  }
-}
-
-void Decoder::DecodeUnconditional(Instr* instr) {
-  if (instr->Bits(7, 4) == 0xB && instr->Bits(27, 25) == 0 && instr->HasL()) {
-    Format(instr, "'memop'h'pu 'rd, ");
-    bool immediate = instr->HasB();
-    switch (instr->PUField()) {
-      case 0: {
-        // Post index, negative.
-        if (instr->HasW()) {
-          Unknown(instr);
-          break;
-        }
-        if (immediate) {
-          Format(instr, "['rn], #-'imm12");
-        } else {
-          Format(instr, "['rn], -'rm");
-        }
-        break;
-      }
-      case 1: {
-        // Post index, positive.
-        if (instr->HasW()) {
-          Unknown(instr);
-          break;
-        }
-        if (immediate) {
-          Format(instr, "['rn], #+'imm12");
-        } else {
-          Format(instr, "['rn], +'rm");
-        }
-        break;
-      }
-      case 2: {
-        // Pre index or offset, negative.
-        if (immediate) {
-          Format(instr, "['rn, #-'imm12]'w");
-        } else {
-          Format(instr, "['rn, -'rm]'w");
-        }
-        break;
-      }
-      case 3: {
-        // Pre index or offset, positive.
-        if (immediate) {
-          Format(instr, "['rn, #+'imm12]'w");
-        } else {
-          Format(instr, "['rn, +'rm]'w");
-        }
-        break;
-      }
-      default: {
-        // The PU field is a 2-bit field.
-        UNREACHABLE();
-        break;
-      }
-    }
-    return;
-  }
-  Format(instr, "break 'msg");
-}
-
-
-// void Decoder::DecodeTypeVFP(Instr* instr)
-// vmov: Sn = Rt
-// vmov: Rt = Sn
-// vcvt: Dd = Sm
-// vcvt: Sd = Dm
-// Dd = vadd(Dn, Dm)
-// Dd = vsub(Dn, Dm)
-// Dd = vmul(Dn, Dm)
-// Dd = vdiv(Dn, Dm)
-// vcmp(Dd, Dm)
-// vmrs
-// Dd = vsqrt(Dm)
-void Decoder::DecodeTypeVFP(Instr* instr) {
-  ASSERT((instr->TypeField() == 7) && (instr->Bit(24) == 0x0) );
-  ASSERT(instr->Bits(11, 9) == 0x5);
-
-  if (instr->Bit(4) == 0) {
-    if (instr->Opc1Field() == 0x7) {
-      // Other data processing instructions
-      if ((instr->Opc2Field() == 0x0) && (instr->Opc3Field() == 0x1)) {
-        // vmov register to register.
-        if (instr->SzField() == 0x1) {
-          Format(instr, "vmov.f64'cond 'Dd, 'Dm");
-        } else {
-          Format(instr, "vmov.f32'cond 'Sd, 'Sm");
-        }
-      } else if ((instr->Opc2Field() == 0x7) && (instr->Opc3Field() == 0x3)) {
-        DecodeVCVTBetweenDoubleAndSingle(instr);
-      } else if ((instr->Opc2Field() == 0x8) && (instr->Opc3Field() & 0x1)) {
-        DecodeVCVTBetweenFloatingPointAndInteger(instr);
-      } else if (((instr->Opc2Field() >> 1) == 0x6) &&
-                 (instr->Opc3Field() & 0x1)) {
-        DecodeVCVTBetweenFloatingPointAndInteger(instr);
-      } else if (((instr->Opc2Field() == 0x4) || (instr->Opc2Field() == 0x5)) &&
-                 (instr->Opc3Field() & 0x1)) {
-        DecodeVCMP(instr);
-      } else if (((instr->Opc2Field() == 0x1)) && (instr->Opc3Field() == 0x3)) {
-        Format(instr, "vsqrt.f64'cond 'Dd, 'Dm");
-      } else if (instr->Opc3Field() == 0x0) {
-        if (instr->SzField() == 0x1) {
-          Format(instr, "vmov.f64'cond 'Dd, 'd");
-        } else {
-          Unknown(instr);  // Not used by V8.
-        }
-      } else {
-        Unknown(instr);  // Not used by V8.
-      }
-    } else if (instr->Opc1Field() == 0x3) {
-      if (instr->SzField() == 0x1) {
-        if (instr->Opc3Field() & 0x1) {
-          Format(instr, "vsub.f64'cond 'Dd, 'Dn, 'Dm");
-        } else {
-          Format(instr, "vadd.f64'cond 'Dd, 'Dn, 'Dm");
-        }
-      } else {
-        Unknown(instr);  // Not used by V8.
-      }
-    } else if ((instr->Opc1Field() == 0x2) && !(instr->Opc3Field() & 0x1)) {
-      if (instr->SzField() == 0x1) {
-        Format(instr, "vmul.f64'cond 'Dd, 'Dn, 'Dm");
-      } else {
-        Unknown(instr);  // Not used by V8.
-      }
-    } else if ((instr->Opc1Field() == 0x4) && !(instr->Opc3Field() & 0x1)) {
-      if (instr->SzField() == 0x1) {
-        Format(instr, "vdiv.f64'cond 'Dd, 'Dn, 'Dm");
-      } else {
-        Unknown(instr);  // Not used by V8.
-      }
-    } else {
-      Unknown(instr);  // Not used by V8.
-    }
-  } else {
-    if ((instr->VCField() == 0x0) &&
-        (instr->VAField() == 0x0)) {
-      DecodeVMOVBetweenCoreAndSinglePrecisionRegisters(instr);
-    } else if ((instr->VLField() == 0x1) &&
-               (instr->VCField() == 0x0) &&
-               (instr->VAField() == 0x7) &&
-               (instr->Bits(19, 16) == 0x1)) {
-      if (instr->Bits(15, 12) == 0xF)
-        Format(instr, "vmrs'cond APSR, FPSCR");
-      else
-        Unknown(instr);  // Not used by V8.
-    } else {
-      Unknown(instr);  // Not used by V8.
-    }
-  }
-}
-
-
-void Decoder::DecodeVMOVBetweenCoreAndSinglePrecisionRegisters(Instr* instr) {
-  ASSERT((instr->Bit(4) == 1) && (instr->VCField() == 0x0) &&
-         (instr->VAField() == 0x0));
-
-  bool to_arm_register = (instr->VLField() == 0x1);
-
-  if (to_arm_register) {
-    Format(instr, "vmov'cond 'rt, 'Sn");
-  } else {
-    Format(instr, "vmov'cond 'Sn, 'rt");
-  }
-}
-
-
-void Decoder::DecodeVCMP(Instr* instr) {
-  ASSERT((instr->Bit(4) == 0) && (instr->Opc1Field() == 0x7));
-  ASSERT(((instr->Opc2Field() == 0x4) || (instr->Opc2Field() == 0x5)) &&
-         (instr->Opc3Field() & 0x1));
-
-  // Comparison.
-  bool dp_operation = (instr->SzField() == 1);
-  bool raise_exception_for_qnan = (instr->Bit(7) == 0x1);
-
-  if (dp_operation && !raise_exception_for_qnan) {
-    Format(instr, "vcmp.f64'cond 'Dd, 'Dm");
-  } else {
-    Unknown(instr);  // Not used by V8.
-  }
-}
-
-
-void Decoder::DecodeVCVTBetweenDoubleAndSingle(Instr* instr) {
-  ASSERT((instr->Bit(4) == 0) && (instr->Opc1Field() == 0x7));
-  ASSERT((instr->Opc2Field() == 0x7) && (instr->Opc3Field() == 0x3));
-
-  bool double_to_single = (instr->SzField() == 1);
-
-  if (double_to_single) {
-    Format(instr, "vcvt.f32.f64'cond 'Sd, 'Dm");
-  } else {
-    Format(instr, "vcvt.f64.f32'cond 'Dd, 'Sm");
-  }
-}
-
-
-void Decoder::DecodeVCVTBetweenFloatingPointAndInteger(Instr* instr) {
-  ASSERT((instr->Bit(4) == 0) && (instr->Opc1Field() == 0x7));
-  ASSERT(((instr->Opc2Field() == 0x8) && (instr->Opc3Field() & 0x1)) ||
-         (((instr->Opc2Field() >> 1) == 0x6) && (instr->Opc3Field() & 0x1)));
-
-  bool to_integer = (instr->Bit(18) == 1);
-  bool dp_operation = (instr->SzField() == 1);
-  if (to_integer) {
-    bool unsigned_integer = (instr->Bit(16) == 0);
-
-    if (dp_operation) {
-      if (unsigned_integer) {
-        Format(instr, "vcvt.u32.f64'cond 'Sd, 'Dm");
-      } else {
-        Format(instr, "vcvt.s32.f64'cond 'Sd, 'Dm");
-      }
-    } else {
-      if (unsigned_integer) {
-        Format(instr, "vcvt.u32.f32'cond 'Sd, 'Sm");
-      } else {
-        Format(instr, "vcvt.s32.f32'cond 'Sd, 'Sm");
-      }
-    }
-  } else {
-    bool unsigned_integer = (instr->Bit(7) == 0);
-
-    if (dp_operation) {
-      if (unsigned_integer) {
-        Format(instr, "vcvt.f64.u32'cond 'Dd, 'Sm");
-      } else {
-        Format(instr, "vcvt.f64.s32'cond 'Dd, 'Sm");
-      }
-    } else {
-      if (unsigned_integer) {
-        Format(instr, "vcvt.f32.u32'cond 'Sd, 'Sm");
-      } else {
-        Format(instr, "vcvt.f32.s32'cond 'Sd, 'Sm");
-      }
-    }
-  }
-}
-
-
-// Decode Type 6 coprocessor instructions.
-// Dm = vmov(Rt, Rt2)
-// <Rt, Rt2> = vmov(Dm)
-// Ddst = MEM(Rbase + 4*offset).
-// MEM(Rbase + 4*offset) = Dsrc.
-void Decoder::DecodeType6CoprocessorIns(Instr* instr) {
-  ASSERT((instr->TypeField() == 6));
-
-  if (instr->CoprocessorField() == 0xA) {
-    switch (instr->OpcodeField()) {
-      case 0x8:
-        if (instr->HasL()) {
-          Format(instr, "vldr'cond 'Sd, ['rn - 4*'off8]");
-        } else {
-          Format(instr, "vstr'cond 'Sd, ['rn - 4*'off8]");
-        }
-        break;
-      case 0xC:
-        if (instr->HasL()) {
-          Format(instr, "vldr'cond 'Sd, ['rn + 4*'off8]");
-        } else {
-          Format(instr, "vstr'cond 'Sd, ['rn + 4*'off8]");
-        }
-        break;
-      default:
-        Unknown(instr);  // Not used by V8.
-        break;
-    }
-  } else if (instr->CoprocessorField() == 0xB) {
-    switch (instr->OpcodeField()) {
-      case 0x2:
-        // Load and store double to two GP registers
-        if (instr->Bits(7, 4) != 0x1) {
-          Unknown(instr);  // Not used by V8.
-        } else if (instr->HasL()) {
-          Format(instr, "vmov'cond 'rt, 'rn, 'Dm");
-        } else {
-          Format(instr, "vmov'cond 'Dm, 'rt, 'rn");
-        }
-        break;
-      case 0x8:
-        if (instr->HasL()) {
-          Format(instr, "vldr'cond 'Dd, ['rn - 4*'off8]");
-        } else {
-          Format(instr, "vstr'cond 'Dd, ['rn - 4*'off8]");
-        }
-        break;
-      case 0xC:
-        if (instr->HasL()) {
-          Format(instr, "vldr'cond 'Dd, ['rn + 4*'off8]");
-        } else {
-          Format(instr, "vstr'cond 'Dd, ['rn + 4*'off8]");
-        }
-        break;
-      default:
-        Unknown(instr);  // Not used by V8.
-        break;
-    }
-  } else {
-    UNIMPLEMENTED();  // Not used by V8.
-  }
-}
-
-
-// Disassemble the instruction at *instr_ptr into the output buffer.
-int Decoder::InstructionDecode(byte* instr_ptr) {
-  Instr* instr = Instr::At(instr_ptr);
-  // Print raw instruction bytes.
-  out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
-                                       "%08x       ",
-                                       instr->InstructionBits());
-  if (instr->ConditionField() == special_condition) {
-    DecodeUnconditional(instr);
-    return Instr::kInstrSize;
-  }
-  switch (instr->TypeField()) {
-    case 0:
-    case 1: {
-      DecodeType01(instr);
-      break;
-    }
-    case 2: {
-      DecodeType2(instr);
-      break;
-    }
-    case 3: {
-      DecodeType3(instr);
-      break;
-    }
-    case 4: {
-      DecodeType4(instr);
-      break;
-    }
-    case 5: {
-      DecodeType5(instr);
-      break;
-    }
-    case 6: {
-      DecodeType6(instr);
-      break;
-    }
-    case 7: {
-      DecodeType7(instr);
-      break;
-    }
-    default: {
-      // The type field is 3-bits in the ARM encoding.
-      UNREACHABLE();
-      break;
-    }
-  }
-  return Instr::kInstrSize;
-}
-
-
-} }  // namespace assembler::arm
-
-
-
-//------------------------------------------------------------------------------
-
-namespace disasm {
-
-namespace v8i = v8::internal;
-
-
-const char* NameConverter::NameOfAddress(byte* addr) const {
-  static v8::internal::EmbeddedVector<char, 32> tmp_buffer;
-  v8::internal::OS::SNPrintF(tmp_buffer, "%p", addr);
-  return tmp_buffer.start();
-}
-
-
-const char* NameConverter::NameOfConstant(byte* addr) const {
-  return NameOfAddress(addr);
-}
-
-
-const char* NameConverter::NameOfCPURegister(int reg) const {
-  return assembler::arm::Registers::Name(reg);
-}
-
-
-const char* NameConverter::NameOfByteCPURegister(int reg) const {
-  UNREACHABLE();  // ARM does not have the concept of a byte register
-  return "nobytereg";
-}
-
-
-const char* NameConverter::NameOfXMMRegister(int reg) const {
-  UNREACHABLE();  // ARM does not have any XMM registers
-  return "noxmmreg";
-}
-
-
-const char* NameConverter::NameInCode(byte* addr) const {
-  // The default name converter is called for unknown code. So we will not try
-  // to access any memory.
-  return "";
-}
-
-
-//------------------------------------------------------------------------------
-
-Disassembler::Disassembler(const NameConverter& converter)
-    : converter_(converter) {}
-
-
-Disassembler::~Disassembler() {}
-
-
-int Disassembler::InstructionDecode(v8::internal::Vector<char> buffer,
-                                    byte* instruction) {
-  assembler::arm::Decoder d(converter_, buffer);
-  return d.InstructionDecode(instruction);
-}
-
-
-int Disassembler::ConstantPoolSizeAt(byte* instruction) {
-  int instruction_bits = *(reinterpret_cast<int*>(instruction));
-  if ((instruction_bits & 0xfff00000) == 0x03000000) {
-    return instruction_bits & 0x0000ffff;
-  } else {
-    return -1;
-  }
-}
-
-
-void Disassembler::Disassemble(FILE* f, byte* begin, byte* end) {
-  NameConverter converter;
-  Disassembler d(converter);
-  for (byte* pc = begin; pc < end;) {
-    v8::internal::EmbeddedVector<char, 128> buffer;
-    buffer[0] = '\0';
-    byte* prev_pc = pc;
-    pc += d.InstructionDecode(buffer, pc);
-    fprintf(f, "%p    %08x      %s\n",
-            prev_pc, *reinterpret_cast<int32_t*>(prev_pc), buffer.start());
-  }
-}
-
-
-}  // namespace disasm
-
-#endif  // V8_TARGET_ARCH_ARM