therubyracer 0.8.1.pre2 → 0.8.1

data/ext/v8/upstream/3.1.8/src/arm/assembler-arm.cc

@@ -0,0 +1,2756 @@
+// Copyright (c) 1994-2006 Sun Microsystems Inc.
+// All Rights Reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions
+// are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// - Redistribution in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the
+// distribution.
+//
+// - Neither the name of Sun Microsystems or the names of contributors may
+// be used to endorse or promote products derived from this software without
+// specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+// HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+// OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// The original source code covered by the above license above has been
+// modified significantly by Google Inc.
+// Copyright 2010 the V8 project authors. All rights reserved.
+
+#include "v8.h"
+
+#if defined(V8_TARGET_ARCH_ARM)
+
+#include "arm/assembler-arm-inl.h"
+#include "serialize.h"
+
+namespace v8 {
+namespace internal {
+
+// Safe default is no features.
+unsigned CpuFeatures::supported_ = 0;
+unsigned CpuFeatures::enabled_ = 0;
+unsigned CpuFeatures::found_by_runtime_probing_ = 0;
+
+
+#ifdef __arm__
+static uint64_t CpuFeaturesImpliedByCompiler() {
+  uint64_t answer = 0;
+#ifdef CAN_USE_ARMV7_INSTRUCTIONS
+  answer |= 1u << ARMv7;
+#endif  // def CAN_USE_ARMV7_INSTRUCTIONS
+  // If the compiler is allowed to use VFP then we can use VFP too in our code
+  // generation even when generating snapshots.  This won't work for cross
+  // compilation.
+#if defined(__VFP_FP__) && !defined(__SOFTFP__)
+  answer |= 1u << VFP3;
+#endif  // defined(__VFP_FP__) && !defined(__SOFTFP__)
+#ifdef CAN_USE_VFP_INSTRUCTIONS
+  answer |= 1u << VFP3;
+#endif  // def CAN_USE_VFP_INSTRUCTIONS
+  return answer;
+}
+#endif  // def __arm__
+
+
+void CpuFeatures::Probe(bool portable) {
+#ifndef __arm__
+  // For the simulator=arm build, use VFP when FLAG_enable_vfp3 is enabled.
+  if (FLAG_enable_vfp3) {
+    supported_ |= 1u << VFP3;
+  }
+  // For the simulator=arm build, use ARMv7 when FLAG_enable_armv7 is enabled
+  if (FLAG_enable_armv7) {
+    supported_ |= 1u << ARMv7;
+  }
+#else  // def __arm__
+  if (portable && Serializer::enabled()) {
+    supported_ |= OS::CpuFeaturesImpliedByPlatform();
+    supported_ |= CpuFeaturesImpliedByCompiler();
+    return;  // No features if we might serialize.
+  }
+
+  if (OS::ArmCpuHasFeature(VFP3)) {
+    // This implementation also sets the VFP flags if
+    // runtime detection of VFP returns true.
+    supported_ |= 1u << VFP3;
+    found_by_runtime_probing_ |= 1u << VFP3;
+  }
+
+  if (OS::ArmCpuHasFeature(ARMv7)) {
+    supported_ |= 1u << ARMv7;
+    found_by_runtime_probing_ |= 1u << ARMv7;
+  }
+
+  if (!portable) found_by_runtime_probing_ = 0;
+#endif
+}
+
+
+// -----------------------------------------------------------------------------
+// Implementation of RelocInfo
+
+const int RelocInfo::kApplyMask = 0;
+
+
+bool RelocInfo::IsCodedSpecially() {
+  // The deserializer needs to know whether a pointer is specially coded.  Being
+  // specially coded on ARM means that it is a movw/movt instruction.  We don't
+  // generate those yet.
+  return false;
+}
+
+
+
+void RelocInfo::PatchCode(byte* instructions, int instruction_count) {
+  // Patch the code at the current address with the supplied instructions.
+  Instr* pc = reinterpret_cast<Instr*>(pc_);
+  Instr* instr = reinterpret_cast<Instr*>(instructions);
+  for (int i = 0; i < instruction_count; i++) {
+    *(pc + i) = *(instr + i);
+  }
+
+  // Indicate that code has changed.
+  CPU::FlushICache(pc_, instruction_count * Assembler::kInstrSize);
+}
+
+
+// Patch the code at the current PC with a call to the target address.
+// Additional guard instructions can be added if required.
+void RelocInfo::PatchCodeWithCall(Address target, int guard_bytes) {
+  // Patch the code at the current address with a call to the target.
+  UNIMPLEMENTED();
+}
+
+
+// -----------------------------------------------------------------------------
+// Implementation of Operand and MemOperand
+// See assembler-arm-inl.h for inlined constructors
+
+Operand::Operand(Handle<Object> handle) {
+  rm_ = no_reg;
+  // Verify all Objects referred by code are NOT in new space.
+  Object* obj = *handle;
+  ASSERT(!Heap::InNewSpace(obj));
+  if (obj->IsHeapObject()) {
+    imm32_ = reinterpret_cast<intptr_t>(handle.location());
+    rmode_ = RelocInfo::EMBEDDED_OBJECT;
+  } else {
+    // no relocation needed
+    imm32_ =  reinterpret_cast<intptr_t>(obj);
+    rmode_ = RelocInfo::NONE;
+  }
+}
+
+
+Operand::Operand(Register rm, ShiftOp shift_op, int shift_imm) {
+  ASSERT(is_uint5(shift_imm));
+  ASSERT(shift_op != ROR || shift_imm != 0);  // use RRX if you mean it
+  rm_ = rm;
+  rs_ = no_reg;
+  shift_op_ = shift_op;
+  shift_imm_ = shift_imm & 31;
+  if (shift_op == RRX) {
+    // encoded as ROR with shift_imm == 0
+    ASSERT(shift_imm == 0);
+    shift_op_ = ROR;
+    shift_imm_ = 0;
+  }
+}
+
+
+Operand::Operand(Register rm, ShiftOp shift_op, Register rs) {
+  ASSERT(shift_op != RRX);
+  rm_ = rm;
+  rs_ = no_reg;
+  shift_op_ = shift_op;
+  rs_ = rs;
+}
+
+
+MemOperand::MemOperand(Register rn, int32_t offset, AddrMode am) {
+  rn_ = rn;
+  rm_ = no_reg;
+  offset_ = offset;
+  am_ = am;
+}
+
+MemOperand::MemOperand(Register rn, Register rm, AddrMode am) {
+  rn_ = rn;
+  rm_ = rm;
+  shift_op_ = LSL;
+  shift_imm_ = 0;
+  am_ = am;
+}
+
+
+MemOperand::MemOperand(Register rn, Register rm,
+                       ShiftOp shift_op, int shift_imm, AddrMode am) {
+  ASSERT(is_uint5(shift_imm));
+  rn_ = rn;
+  rm_ = rm;
+  shift_op_ = shift_op;
+  shift_imm_ = shift_imm & 31;
+  am_ = am;
+}
+
+
+// -----------------------------------------------------------------------------
+// Specific instructions, constants, and masks.
+
+// add(sp, sp, 4) instruction (aka Pop())
+const Instr kPopInstruction =
+    al | PostIndex | 4 | LeaveCC | I | sp.code() * B16 | sp.code() * B12;
+// str(r, MemOperand(sp, 4, NegPreIndex), al) instruction (aka push(r))
+// register r is not encoded.
+const Instr kPushRegPattern =
+    al | B26 | 4 | NegPreIndex | sp.code() * B16;
+// ldr(r, MemOperand(sp, 4, PostIndex), al) instruction (aka pop(r))
+// register r is not encoded.
+const Instr kPopRegPattern =
+    al | B26 | L | 4 | PostIndex | sp.code() * B16;
+// mov lr, pc
+const Instr kMovLrPc = al | MOV | pc.code() | lr.code() * B12;
+// ldr rd, [pc, #offset]
+const Instr kLdrPCMask = kCondMask | 15 * B24 | 7 * B20 | 15 * B16;
+const Instr kLdrPCPattern = al | 5 * B24 | L | pc.code() * B16;
+// blxcc rm
+const Instr kBlxRegMask =
+    15 * B24 | 15 * B20 | 15 * B16 | 15 * B12 | 15 * B8 | 15 * B4;
+const Instr kBlxRegPattern =
+    B24 | B21 | 15 * B16 | 15 * B12 | 15 * B8 | BLX;
+const Instr kMovMvnMask = 0x6d * B21 | 0xf * B16;
+const Instr kMovMvnPattern = 0xd * B21;
+const Instr kMovMvnFlip = B22;
+const Instr kMovLeaveCCMask = 0xdff * B16;
+const Instr kMovLeaveCCPattern = 0x1a0 * B16;
+const Instr kMovwMask = 0xff * B20;
+const Instr kMovwPattern = 0x30 * B20;
+const Instr kMovwLeaveCCFlip = 0x5 * B21;
+const Instr kCmpCmnMask = 0xdd * B20 | 0xf * B12;
+const Instr kCmpCmnPattern = 0x15 * B20;
+const Instr kCmpCmnFlip = B21;
+const Instr kAddSubFlip = 0x6 * B21;
+const Instr kAndBicFlip = 0xe * B21;
+
+// A mask for the Rd register for push, pop, ldr, str instructions.
+const Instr kLdrRegFpOffsetPattern =
+    al | B26 | L | Offset | fp.code() * B16;
+const Instr kStrRegFpOffsetPattern =
+    al | B26 | Offset | fp.code() * B16;
+const Instr kLdrRegFpNegOffsetPattern =
+    al | B26 | L | NegOffset | fp.code() * B16;
+const Instr kStrRegFpNegOffsetPattern =
+    al | B26 | NegOffset | fp.code() * B16;
+const Instr kLdrStrInstrTypeMask = 0xffff0000;
+const Instr kLdrStrInstrArgumentMask = 0x0000ffff;
+const Instr kLdrStrOffsetMask = 0x00000fff;
+
+
+// Spare buffer.
+static const int kMinimalBufferSize = 4*KB;
+static byte* spare_buffer_ = NULL;
+
+
+Assembler::Assembler(void* buffer, int buffer_size)
+    : positions_recorder_(this),
+      allow_peephole_optimization_(false) {
+  allow_peephole_optimization_ = FLAG_peephole_optimization;
+  if (buffer == NULL) {
+    // Do our own buffer management.
+    if (buffer_size <= kMinimalBufferSize) {
+      buffer_size = kMinimalBufferSize;
+
+      if (spare_buffer_ != NULL) {
+        buffer = spare_buffer_;
+        spare_buffer_ = NULL;
+      }
+    }
+    if (buffer == NULL) {
+      buffer_ = NewArray<byte>(buffer_size);
+    } else {
+      buffer_ = static_cast<byte*>(buffer);
+    }
+    buffer_size_ = buffer_size;
+    own_buffer_ = true;
+
+  } else {
+    // Use externally provided buffer instead.
+    ASSERT(buffer_size > 0);
+    buffer_ = static_cast<byte*>(buffer);
+    buffer_size_ = buffer_size;
+    own_buffer_ = false;
+  }
+
+  // Setup buffer pointers.
+  ASSERT(buffer_ != NULL);
+  pc_ = buffer_;
+  reloc_info_writer.Reposition(buffer_ + buffer_size, pc_);
+  num_prinfo_ = 0;
+  next_buffer_check_ = 0;
+  const_pool_blocked_nesting_ = 0;
+  no_const_pool_before_ = 0;
+  last_const_pool_end_ = 0;
+  last_bound_pos_ = 0;
+}
+
+
+Assembler::~Assembler() {
+  ASSERT(const_pool_blocked_nesting_ == 0);
+  if (own_buffer_) {
+    if (spare_buffer_ == NULL && buffer_size_ == kMinimalBufferSize) {
+      spare_buffer_ = buffer_;
+    } else {
+      DeleteArray(buffer_);
+    }
+  }
+}
+
+
+void Assembler::GetCode(CodeDesc* desc) {
+  // Emit constant pool if necessary.
+  CheckConstPool(true, false);
+  ASSERT(num_prinfo_ == 0);
+
+  // Setup code descriptor.
+  desc->buffer = buffer_;
+  desc->buffer_size = buffer_size_;
+  desc->instr_size = pc_offset();
+  desc->reloc_size = (buffer_ + buffer_size_) - reloc_info_writer.pos();
+}
+
+
+void Assembler::Align(int m) {
+  ASSERT(m >= 4 && IsPowerOf2(m));
+  while ((pc_offset() & (m - 1)) != 0) {
+    nop();
+  }
+}
+
+
+void Assembler::CodeTargetAlign() {
+  // Preferred alignment of jump targets on some ARM chips.
+  Align(8);
+}
+
+
+Condition Assembler::GetCondition(Instr instr) {
+  return Instruction::ConditionField(instr);
+}
+
+
+bool Assembler::IsBranch(Instr instr) {
+  return (instr & (B27 | B25)) == (B27 | B25);
+}
+
+
+int Assembler::GetBranchOffset(Instr instr) {
+  ASSERT(IsBranch(instr));
+  // Take the jump offset in the lower 24 bits, sign extend it and multiply it
+  // with 4 to get the offset in bytes.
+  return ((instr & kImm24Mask) << 8) >> 6;
+}
+
+
+bool Assembler::IsLdrRegisterImmediate(Instr instr) {
+  return (instr & (B27 | B26 | B25 | B22 | B20)) == (B26 | B20);
+}
+
+
+int Assembler::GetLdrRegisterImmediateOffset(Instr instr) {
+  ASSERT(IsLdrRegisterImmediate(instr));
+  bool positive = (instr & B23) == B23;
+  int offset = instr & kOff12Mask;  // Zero extended offset.
+  return positive ? offset : -offset;
+}
+
+
+Instr Assembler::SetLdrRegisterImmediateOffset(Instr instr, int offset) {
+  ASSERT(IsLdrRegisterImmediate(instr));
+  bool positive = offset >= 0;
+  if (!positive) offset = -offset;
+  ASSERT(is_uint12(offset));
+  // Set bit indicating whether the offset should be added.
+  instr = (instr & ~B23) | (positive ? B23 : 0);
+  // Set the actual offset.
+  return (instr & ~kOff12Mask) | offset;
+}
+
+
+bool Assembler::IsStrRegisterImmediate(Instr instr) {
+  return (instr & (B27 | B26 | B25 | B22 | B20)) == B26;
+}
+
+
+Instr Assembler::SetStrRegisterImmediateOffset(Instr instr, int offset) {
+  ASSERT(IsStrRegisterImmediate(instr));
+  bool positive = offset >= 0;
+  if (!positive) offset = -offset;
+  ASSERT(is_uint12(offset));
+  // Set bit indicating whether the offset should be added.
+  instr = (instr & ~B23) | (positive ? B23 : 0);
+  // Set the actual offset.
+  return (instr & ~kOff12Mask) | offset;
+}
+
+
+bool Assembler::IsAddRegisterImmediate(Instr instr) {
+  return (instr & (B27 | B26 | B25 | B24 | B23 | B22 | B21)) == (B25 | B23);
+}
+
+
+Instr Assembler::SetAddRegisterImmediateOffset(Instr instr, int offset) {
+  ASSERT(IsAddRegisterImmediate(instr));
+  ASSERT(offset >= 0);
+  ASSERT(is_uint12(offset));
+  // Set the offset.
+  return (instr & ~kOff12Mask) | offset;
+}
+
+
+Register Assembler::GetRd(Instr instr) {
+  Register reg;
+  reg.code_ = Instruction::RdValue(instr);
+  return reg;
+}
+
+
+Register Assembler::GetRn(Instr instr) {
+  Register reg;
+  reg.code_ = Instruction::RnValue(instr);
+  return reg;
+}
+
+
+Register Assembler::GetRm(Instr instr) {
+  Register reg;
+  reg.code_ = Instruction::RmValue(instr);
+  return reg;
+}
+
+
+bool Assembler::IsPush(Instr instr) {
+  return ((instr & ~kRdMask) == kPushRegPattern);
+}
+
+
+bool Assembler::IsPop(Instr instr) {
+  return ((instr & ~kRdMask) == kPopRegPattern);
+}
+
+
+bool Assembler::IsStrRegFpOffset(Instr instr) {
+  return ((instr & kLdrStrInstrTypeMask) == kStrRegFpOffsetPattern);
+}
+
+
+bool Assembler::IsLdrRegFpOffset(Instr instr) {
+  return ((instr & kLdrStrInstrTypeMask) == kLdrRegFpOffsetPattern);
+}
+
+
+bool Assembler::IsStrRegFpNegOffset(Instr instr) {
+  return ((instr & kLdrStrInstrTypeMask) == kStrRegFpNegOffsetPattern);
+}
+
+
+bool Assembler::IsLdrRegFpNegOffset(Instr instr) {
+  return ((instr & kLdrStrInstrTypeMask) == kLdrRegFpNegOffsetPattern);
+}
+
+
+bool Assembler::IsLdrPcImmediateOffset(Instr instr) {
+  // Check the instruction is indeed a
+  // ldr<cond> <Rd>, [pc +/- offset_12].
+  return (instr & (kLdrPCMask & ~kCondMask)) == 0x051f0000;
+}
+
+
+bool Assembler::IsTstImmediate(Instr instr) {
+  return (instr & (B27 | B26 | I | kOpCodeMask | S | kRdMask)) ==
+      (I | TST | S);
+}
+
+
+bool Assembler::IsCmpRegister(Instr instr) {
+  return (instr & (B27 | B26 | I | kOpCodeMask | S | kRdMask | B4)) ==
+      (CMP | S);
+}
+
+
+bool Assembler::IsCmpImmediate(Instr instr) {
+  return (instr & (B27 | B26 | I | kOpCodeMask | S | kRdMask)) ==
+      (I | CMP | S);
+}
+
+
+Register Assembler::GetCmpImmediateRegister(Instr instr) {
+  ASSERT(IsCmpImmediate(instr));
+  return GetRn(instr);
+}
+
+
+int Assembler::GetCmpImmediateRawImmediate(Instr instr) {
+  ASSERT(IsCmpImmediate(instr));
+  return instr & kOff12Mask;
+}
+
+// Labels refer to positions in the (to be) generated code.
+// There are bound, linked, and unused labels.
+//
+// Bound labels refer to known positions in the already
+// generated code. pos() is the position the label refers to.
+//
+// Linked labels refer to unknown positions in the code
+// to be generated; pos() is the position of the last
+// instruction using the label.
+
+
+// The link chain is terminated by a negative code position (must be aligned)
+const int kEndOfChain = -4;
+
+
+int Assembler::target_at(int pos)  {
+  Instr instr = instr_at(pos);
+  if ((instr & ~kImm24Mask) == 0) {
+    // Emitted label constant, not part of a branch.
+    return instr - (Code::kHeaderSize - kHeapObjectTag);
+  }
+  ASSERT((instr & 7*B25) == 5*B25);  // b, bl, or blx imm24
+  int imm26 = ((instr & kImm24Mask) << 8) >> 6;
+  if ((Instruction::ConditionField(instr) == kSpecialCondition) &&
+      ((instr & B24) != 0)) {
+    // blx uses bit 24 to encode bit 2 of imm26
+    imm26 += 2;
+  }
+  return pos + kPcLoadDelta + imm26;
+}
+
+
+void Assembler::target_at_put(int pos, int target_pos) {
+  Instr instr = instr_at(pos);
+  if ((instr & ~kImm24Mask) == 0) {
+    ASSERT(target_pos == kEndOfChain || target_pos >= 0);
+    // Emitted label constant, not part of a branch.
+    // Make label relative to Code* of generated Code object.
+    instr_at_put(pos, target_pos + (Code::kHeaderSize - kHeapObjectTag));
+    return;
+  }
+  int imm26 = target_pos - (pos + kPcLoadDelta);
+  ASSERT((instr & 7*B25) == 5*B25);  // b, bl, or blx imm24
+  if (Instruction::ConditionField(instr) == kSpecialCondition) {
+    // blx uses bit 24 to encode bit 2 of imm26
+    ASSERT((imm26 & 1) == 0);
+    instr = (instr & ~(B24 | kImm24Mask)) | ((imm26 & 2) >> 1)*B24;
+  } else {
+    ASSERT((imm26 & 3) == 0);
+    instr &= ~kImm24Mask;
+  }
+  int imm24 = imm26 >> 2;
+  ASSERT(is_int24(imm24));
+  instr_at_put(pos, instr | (imm24 & kImm24Mask));
+}
+
+
+void Assembler::print(Label* L) {
+  if (L->is_unused()) {
+    PrintF("unused label\n");
+  } else if (L->is_bound()) {
+    PrintF("bound label to %d\n", L->pos());
+  } else if (L->is_linked()) {
+    Label l = *L;
+    PrintF("unbound label");
+    while (l.is_linked()) {
+      PrintF("@ %d ", l.pos());
+      Instr instr = instr_at(l.pos());
+      if ((instr & ~kImm24Mask) == 0) {
+        PrintF("value\n");
+      } else {
+        ASSERT((instr & 7*B25) == 5*B25);  // b, bl, or blx
+        Condition cond = Instruction::ConditionField(instr);
+        const char* b;
+        const char* c;
+        if (cond == kSpecialCondition) {
+          b = "blx";
+          c = "";
+        } else {
+          if ((instr & B24) != 0)
+            b = "bl";
+          else
+            b = "b";
+
+          switch (cond) {
+            case eq: c = "eq"; break;
+            case ne: c = "ne"; break;
+            case hs: c = "hs"; break;
+            case lo: c = "lo"; break;
+            case mi: c = "mi"; break;
+            case pl: c = "pl"; break;
+            case vs: c = "vs"; break;
+            case vc: c = "vc"; break;
+            case hi: c = "hi"; break;
+            case ls: c = "ls"; break;
+            case ge: c = "ge"; break;
+            case lt: c = "lt"; break;
+            case gt: c = "gt"; break;
+            case le: c = "le"; break;
+            case al: c = ""; break;
+            default:
+              c = "";
+              UNREACHABLE();
+          }
+        }
+        PrintF("%s%s\n", b, c);
+      }
+      next(&l);
+    }
+  } else {
+    PrintF("label in inconsistent state (pos = %d)\n", L->pos_);
+  }
+}
+
+
+void Assembler::bind_to(Label* L, int pos) {
+  ASSERT(0 <= pos && pos <= pc_offset());  // must have a valid binding position
+  while (L->is_linked()) {
+    int fixup_pos = L->pos();
+    next(L);  // call next before overwriting link with target at fixup_pos
+    target_at_put(fixup_pos, pos);
+  }
+  L->bind_to(pos);
+
+  // Keep track of the last bound label so we don't eliminate any instructions
+  // before a bound label.
+  if (pos > last_bound_pos_)
+    last_bound_pos_ = pos;
+}
+
+
+void Assembler::link_to(Label* L, Label* appendix) {
+  if (appendix->is_linked()) {
+    if (L->is_linked()) {
+      // Append appendix to L's list.
+      int fixup_pos;
+      int link = L->pos();
+      do {
+        fixup_pos = link;
+        link = target_at(fixup_pos);
+      } while (link > 0);
+      ASSERT(link == kEndOfChain);
+      target_at_put(fixup_pos, appendix->pos());
+    } else {
+      // L is empty, simply use appendix.
+      *L = *appendix;
+    }
+  }
+  appendix->Unuse();  // appendix should not be used anymore
+}
+
+
+void Assembler::bind(Label* L) {
+  ASSERT(!L->is_bound());  // label can only be bound once
+  bind_to(L, pc_offset());
+}
+
+
+void Assembler::next(Label* L) {
+  ASSERT(L->is_linked());
+  int link = target_at(L->pos());
+  if (link > 0) {
+    L->link_to(link);
+  } else {
+    ASSERT(link == kEndOfChain);
+    L->Unuse();
+  }
+}
+
+
+static Instr EncodeMovwImmediate(uint32_t immediate) {
+  ASSERT(immediate < 0x10000);
+  return ((immediate & 0xf000) << 4) | (immediate & 0xfff);
+}
+
+
+// Low-level code emission routines depending on the addressing mode.
+// If this returns true then you have to use the rotate_imm and immed_8
+// that it returns, because it may have already changed the instruction
+// to match them!
+static bool fits_shifter(uint32_t imm32,
+                         uint32_t* rotate_imm,
+                         uint32_t* immed_8,
+                         Instr* instr) {
+  // imm32 must be unsigned.
+  for (int rot = 0; rot < 16; rot++) {
+    uint32_t imm8 = (imm32 << 2*rot) | (imm32 >> (32 - 2*rot));
+    if ((imm8 <= 0xff)) {
+      *rotate_imm = rot;
+      *immed_8 = imm8;
+      return true;
+    }
+  }
+  // If the opcode is one with a complementary version and the complementary
+  // immediate fits, change the opcode.
+  if (instr != NULL) {
+    if ((*instr & kMovMvnMask) == kMovMvnPattern) {
+      if (fits_shifter(~imm32, rotate_imm, immed_8, NULL)) {
+        *instr ^= kMovMvnFlip;
+        return true;
+      } else if ((*instr & kMovLeaveCCMask) == kMovLeaveCCPattern) {
+        if (CpuFeatures::IsSupported(ARMv7)) {
+          if (imm32 < 0x10000) {
+            *instr ^= kMovwLeaveCCFlip;
+            *instr |= EncodeMovwImmediate(imm32);
+            *rotate_imm = *immed_8 = 0;  // Not used for movw.
+            return true;
+          }
+        }
+      }
+    } else if ((*instr & kCmpCmnMask) == kCmpCmnPattern) {
+      if (fits_shifter(-imm32, rotate_imm, immed_8, NULL)) {
+        *instr ^= kCmpCmnFlip;
+        return true;
+      }
+    } else {
+      Instr alu_insn = (*instr & kALUMask);
+      if (alu_insn == ADD ||
+          alu_insn == SUB) {
+        if (fits_shifter(-imm32, rotate_imm, immed_8, NULL)) {
+          *instr ^= kAddSubFlip;
+          return true;
+        }
+      } else if (alu_insn == AND ||
+                 alu_insn == BIC) {
+        if (fits_shifter(~imm32, rotate_imm, immed_8, NULL)) {
+          *instr ^= kAndBicFlip;
+          return true;
+        }
+      }
+    }
+  }
+  return false;
+}
+
+
+// We have to use the temporary register for things that can be relocated even
+// if they can be encoded in the ARM's 12 bits of immediate-offset instruction
+// space.  There is no guarantee that the relocated location can be similarly
+// encoded.
+bool Operand::must_use_constant_pool() const {
+  if (rmode_ == RelocInfo::EXTERNAL_REFERENCE) {
+#ifdef DEBUG
+    if (!Serializer::enabled()) {
+      Serializer::TooLateToEnableNow();
+    }
+#endif  // def DEBUG
+    return Serializer::enabled();
+  } else if (rmode_ == RelocInfo::NONE) {
+    return false;
+  }
+  return true;
+}
+
+
+bool Operand::is_single_instruction() const {
+  if (rm_.is_valid()) return true;
+  if (must_use_constant_pool()) return false;
+  uint32_t dummy1, dummy2;
+  return fits_shifter(imm32_, &dummy1, &dummy2, NULL);
+}
+
+
+void Assembler::addrmod1(Instr instr,
+                         Register rn,
+                         Register rd,
+                         const Operand& x) {
+  CheckBuffer();
+  ASSERT((instr & ~(kCondMask | kOpCodeMask | S)) == 0);
+  if (!x.rm_.is_valid()) {
+    // Immediate.
+    uint32_t rotate_imm;
+    uint32_t immed_8;
+    if (x.must_use_constant_pool() ||
+        !fits_shifter(x.imm32_, &rotate_imm, &immed_8, &instr)) {
+      // The immediate operand cannot be encoded as a shifter operand, so load
+      // it first to register ip and change the original instruction to use ip.
+      // However, if the original instruction is a 'mov rd, x' (not setting the
+      // condition code), then replace it with a 'ldr rd, [pc]'.
+      CHECK(!rn.is(ip));  // rn should never be ip, or will be trashed
+      Condition cond = Instruction::ConditionField(instr);
+      if ((instr & ~kCondMask) == 13*B21) {  // mov, S not set
+        if (x.must_use_constant_pool() || !CpuFeatures::IsSupported(ARMv7)) {
+          RecordRelocInfo(x.rmode_, x.imm32_);
+          ldr(rd, MemOperand(pc, 0), cond);
+        } else {
+          // Will probably use movw, will certainly not use constant pool.
+          mov(rd, Operand(x.imm32_ & 0xffff), LeaveCC, cond);
+          movt(rd, static_cast<uint32_t>(x.imm32_) >> 16, cond);
+        }
+      } else {
+        // If this is not a mov or mvn instruction we may still be able to avoid
+        // a constant pool entry by using mvn or movw.
+        if (!x.must_use_constant_pool() &&
+            (instr & kMovMvnMask) != kMovMvnPattern) {
+          mov(ip, x, LeaveCC, cond);
+        } else {
+          RecordRelocInfo(x.rmode_, x.imm32_);
+          ldr(ip, MemOperand(pc, 0), cond);
+        }
+        addrmod1(instr, rn, rd, Operand(ip));
+      }
+      return;
+    }
+    instr |= I | rotate_imm*B8 | immed_8;
+  } else if (!x.rs_.is_valid()) {
+    // Immediate shift.
+    instr |= x.shift_imm_*B7 | x.shift_op_ | x.rm_.code();
+  } else {
+    // Register shift.
+    ASSERT(!rn.is(pc) && !rd.is(pc) && !x.rm_.is(pc) && !x.rs_.is(pc));
+    instr |= x.rs_.code()*B8 | x.shift_op_ | B4 | x.rm_.code();
+  }
+  emit(instr | rn.code()*B16 | rd.code()*B12);
+  if (rn.is(pc) || x.rm_.is(pc)) {
+    // Block constant pool emission for one instruction after reading pc.
+    BlockConstPoolBefore(pc_offset() + kInstrSize);
+  }
+}
+
+
+void Assembler::addrmod2(Instr instr, Register rd, const MemOperand& x) {
+  ASSERT((instr & ~(kCondMask | B | L)) == B26);
+  int am = x.am_;
+  if (!x.rm_.is_valid()) {
+    // Immediate offset.
+    int offset_12 = x.offset_;
+    if (offset_12 < 0) {
+      offset_12 = -offset_12;
+      am ^= U;
+    }
+    if (!is_uint12(offset_12)) {
+      // Immediate offset cannot be encoded, load it first to register ip
+      // rn (and rd in a load) should never be ip, or will be trashed.
+      ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
+      mov(ip, Operand(x.offset_), LeaveCC, Instruction::ConditionField(instr));
+      addrmod2(instr, rd, MemOperand(x.rn_, ip, x.am_));
+      return;
+    }
+    ASSERT(offset_12 >= 0);  // no masking needed
+    instr |= offset_12;
+  } else {
+    // Register offset (shift_imm_ and shift_op_ are 0) or scaled
+    // register offset the constructors make sure than both shift_imm_
+    // and shift_op_ are initialized.
+    ASSERT(!x.rm_.is(pc));
+    instr |= B25 | x.shift_imm_*B7 | x.shift_op_ | x.rm_.code();
+  }
+  ASSERT((am & (P|W)) == P || !x.rn_.is(pc));  // no pc base with writeback
+  emit(instr | am | x.rn_.code()*B16 | rd.code()*B12);
+}
+
+
+void Assembler::addrmod3(Instr instr, Register rd, const MemOperand& x) {
+  ASSERT((instr & ~(kCondMask | L | S6 | H)) == (B4 | B7));
+  ASSERT(x.rn_.is_valid());
+  int am = x.am_;
+  if (!x.rm_.is_valid()) {
+    // Immediate offset.
+    int offset_8 = x.offset_;
+    if (offset_8 < 0) {
+      offset_8 = -offset_8;
+      am ^= U;
+    }
+    if (!is_uint8(offset_8)) {
+      // Immediate offset cannot be encoded, load it first to register ip
+      // rn (and rd in a load) should never be ip, or will be trashed.
+      ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
+      mov(ip, Operand(x.offset_), LeaveCC, Instruction::ConditionField(instr));
+      addrmod3(instr, rd, MemOperand(x.rn_, ip, x.am_));
+      return;
+    }
+    ASSERT(offset_8 >= 0);  // no masking needed
+    instr |= B | (offset_8 >> 4)*B8 | (offset_8 & 0xf);
+  } else if (x.shift_imm_ != 0) {
+    // Scaled register offset not supported, load index first
+    // rn (and rd in a load) should never be ip, or will be trashed.
+    ASSERT(!x.rn_.is(ip) && ((instr & L) == L || !rd.is(ip)));
+    mov(ip, Operand(x.rm_, x.shift_op_, x.shift_imm_), LeaveCC,
+        Instruction::ConditionField(instr));
+    addrmod3(instr, rd, MemOperand(x.rn_, ip, x.am_));
+    return;
+  } else {
+    // Register offset.
+    ASSERT((am & (P|W)) == P || !x.rm_.is(pc));  // no pc index with writeback
+    instr |= x.rm_.code();
+  }
+  ASSERT((am & (P|W)) == P || !x.rn_.is(pc));  // no pc base with writeback
+  emit(instr | am | x.rn_.code()*B16 | rd.code()*B12);
+}
+
+
+void Assembler::addrmod4(Instr instr, Register rn, RegList rl) {
+  ASSERT((instr & ~(kCondMask | P | U | W | L)) == B27);
+  ASSERT(rl != 0);
+  ASSERT(!rn.is(pc));
+  emit(instr | rn.code()*B16 | rl);
+}
+
+
+void Assembler::addrmod5(Instr instr, CRegister crd, const MemOperand& x) {
+  // Unindexed addressing is not encoded by this function.
+  ASSERT_EQ((B27 | B26),
+            (instr & ~(kCondMask | kCoprocessorMask | P | U | N | W | L)));
+  ASSERT(x.rn_.is_valid() && !x.rm_.is_valid());
+  int am = x.am_;
+  int offset_8 = x.offset_;
+  ASSERT((offset_8 & 3) == 0);  // offset must be an aligned word offset
+  offset_8 >>= 2;
+  if (offset_8 < 0) {
+    offset_8 = -offset_8;
+    am ^= U;
+  }
+  ASSERT(is_uint8(offset_8));  // unsigned word offset must fit in a byte
+  ASSERT((am & (P|W)) == P || !x.rn_.is(pc));  // no pc base with writeback
+
+  // Post-indexed addressing requires W == 1; different than in addrmod2/3.
+  if ((am & P) == 0)
+    am |= W;
+
+  ASSERT(offset_8 >= 0);  // no masking needed
+  emit(instr | am | x.rn_.code()*B16 | crd.code()*B12 | offset_8);
+}
+
+
+int Assembler::branch_offset(Label* L, bool jump_elimination_allowed) {
+  int target_pos;
+  if (L->is_bound()) {
+    target_pos = L->pos();
+  } else {
+    if (L->is_linked()) {
+      target_pos = L->pos();  // L's link
+    } else {
+      target_pos = kEndOfChain;
+    }
+    L->link_to(pc_offset());
+  }
+
+  // Block the emission of the constant pool, since the branch instruction must
+  // be emitted at the pc offset recorded by the label.
+  BlockConstPoolBefore(pc_offset() + kInstrSize);
+  return target_pos - (pc_offset() + kPcLoadDelta);
+}
+
+
+void Assembler::label_at_put(Label* L, int at_offset) {
+  int target_pos;
+  if (L->is_bound()) {
+    target_pos = L->pos();
+  } else {
+    if (L->is_linked()) {
+      target_pos = L->pos();  // L's link
+    } else {
+      target_pos = kEndOfChain;
+    }
+    L->link_to(at_offset);
+    instr_at_put(at_offset, target_pos + (Code::kHeaderSize - kHeapObjectTag));
+  }
+}
+
+
+// Branch instructions.
+void Assembler::b(int branch_offset, Condition cond) {
+  ASSERT((branch_offset & 3) == 0);
+  int imm24 = branch_offset >> 2;
+  ASSERT(is_int24(imm24));
+  emit(cond | B27 | B25 | (imm24 & kImm24Mask));
+
+  if (cond == al) {
+    // Dead code is a good location to emit the constant pool.
+    CheckConstPool(false, false);
+  }
+}
+
+
+void Assembler::bl(int branch_offset, Condition cond) {
+  positions_recorder()->WriteRecordedPositions();
+  ASSERT((branch_offset & 3) == 0);
+  int imm24 = branch_offset >> 2;
+  ASSERT(is_int24(imm24));
+  emit(cond | B27 | B25 | B24 | (imm24 & kImm24Mask));
+}
+
+
+void Assembler::blx(int branch_offset) {  // v5 and above
+  positions_recorder()->WriteRecordedPositions();
+  ASSERT((branch_offset & 1) == 0);
+  int h = ((branch_offset & 2) >> 1)*B24;
+  int imm24 = branch_offset >> 2;
+  ASSERT(is_int24(imm24));
+  emit(kSpecialCondition | B27 | B25 | h | (imm24 & kImm24Mask));
+}
+
+
+void Assembler::blx(Register target, Condition cond) {  // v5 and above
+  positions_recorder()->WriteRecordedPositions();
+  ASSERT(!target.is(pc));
+  emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | BLX | target.code());
+}
+
+
+void Assembler::bx(Register target, Condition cond) {  // v5 and above, plus v4t
+  positions_recorder()->WriteRecordedPositions();
+  ASSERT(!target.is(pc));  // use of pc is actually allowed, but discouraged
+  emit(cond | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | BX | target.code());
+}
+
+
+// Data-processing instructions.
+
+void Assembler::and_(Register dst, Register src1, const Operand& src2,
+                     SBit s, Condition cond) {
+  addrmod1(cond | AND | s, src1, dst, src2);
+}
+
+
+void Assembler::eor(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | EOR | s, src1, dst, src2);
+}
+
+
+void Assembler::sub(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | SUB | s, src1, dst, src2);
+}
+
+
+void Assembler::rsb(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | RSB | s, src1, dst, src2);
+}
+
+
+void Assembler::add(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | ADD | s, src1, dst, src2);
+
+  // Eliminate pattern: push(r), pop()
+  //   str(src, MemOperand(sp, 4, NegPreIndex), al);
+  //   add(sp, sp, Operand(kPointerSize));
+  // Both instructions can be eliminated.
+  if (can_peephole_optimize(2) &&
+      // Pattern.
+      instr_at(pc_ - 1 * kInstrSize) == kPopInstruction &&
+      (instr_at(pc_ - 2 * kInstrSize) & ~kRdMask) == kPushRegPattern) {
+    pc_ -= 2 * kInstrSize;
+    if (FLAG_print_peephole_optimization) {
+      PrintF("%x push(reg)/pop() eliminated\n", pc_offset());
+    }
+  }
+}
+
+
+void Assembler::adc(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | ADC | s, src1, dst, src2);
+}
+
+
+void Assembler::sbc(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | SBC | s, src1, dst, src2);
+}
+
+
+void Assembler::rsc(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | RSC | s, src1, dst, src2);
+}
+
+
+void Assembler::tst(Register src1, const Operand& src2, Condition cond) {
+  addrmod1(cond | TST | S, src1, r0, src2);
+}
+
+
+void Assembler::teq(Register src1, const Operand& src2, Condition cond) {
+  addrmod1(cond | TEQ | S, src1, r0, src2);
+}
+
+
+void Assembler::cmp(Register src1, const Operand& src2, Condition cond) {
+  addrmod1(cond | CMP | S, src1, r0, src2);
+}
+
+
+void Assembler::cmp_raw_immediate(
+    Register src, int raw_immediate, Condition cond) {
+  ASSERT(is_uint12(raw_immediate));
+  emit(cond | I | CMP | S | src.code() << 16 | raw_immediate);
+}
+
+
+void Assembler::cmn(Register src1, const Operand& src2, Condition cond) {
+  addrmod1(cond | CMN | S, src1, r0, src2);
+}
+
+
+void Assembler::orr(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | ORR | s, src1, dst, src2);
+}
+
+
+void Assembler::mov(Register dst, const Operand& src, SBit s, Condition cond) {
+  if (dst.is(pc)) {
+    positions_recorder()->WriteRecordedPositions();
+  }
+  // Don't allow nop instructions in the form mov rn, rn to be generated using
+  // the mov instruction. They must be generated using nop(int/NopMarkerTypes)
+  // or MarkCode(int/NopMarkerTypes) pseudo instructions.
+  ASSERT(!(src.is_reg() && src.rm().is(dst) && s == LeaveCC && cond == al));
+  addrmod1(cond | MOV | s, r0, dst, src);
+}
+
+
+void Assembler::movw(Register reg, uint32_t immediate, Condition cond) {
+  ASSERT(immediate < 0x10000);
+  mov(reg, Operand(immediate), LeaveCC, cond);
+}
+
+
+void Assembler::movt(Register reg, uint32_t immediate, Condition cond) {
+  emit(cond | 0x34*B20 | reg.code()*B12 | EncodeMovwImmediate(immediate));
+}
+
+
+void Assembler::bic(Register dst, Register src1, const Operand& src2,
+                    SBit s, Condition cond) {
+  addrmod1(cond | BIC | s, src1, dst, src2);
+}
+
+
+void Assembler::mvn(Register dst, const Operand& src, SBit s, Condition cond) {
+  addrmod1(cond | MVN | s, r0, dst, src);
+}
+
+
+// Multiply instructions.
+void Assembler::mla(Register dst, Register src1, Register src2, Register srcA,
+                    SBit s, Condition cond) {
+  ASSERT(!dst.is(pc) && !src1.is(pc) && !src2.is(pc) && !srcA.is(pc));
+  emit(cond | A | s | dst.code()*B16 | srcA.code()*B12 |
+       src2.code()*B8 | B7 | B4 | src1.code());
+}
+
+
+void Assembler::mul(Register dst, Register src1, Register src2,
+                    SBit s, Condition cond) {
+  ASSERT(!dst.is(pc) && !src1.is(pc) && !src2.is(pc));
+  // dst goes in bits 16-19 for this instruction!
+  emit(cond | s | dst.code()*B16 | src2.code()*B8 | B7 | B4 | src1.code());
+}
+
+
+void Assembler::smlal(Register dstL,
+                      Register dstH,
+                      Register src1,
+                      Register src2,
+                      SBit s,
+                      Condition cond) {
+  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
+  ASSERT(!dstL.is(dstH));
+  emit(cond | B23 | B22 | A | s | dstH.code()*B16 | dstL.code()*B12 |
+       src2.code()*B8 | B7 | B4 | src1.code());
+}
+
+
+void Assembler::smull(Register dstL,
+                      Register dstH,
+                      Register src1,
+                      Register src2,
+                      SBit s,
+                      Condition cond) {
+  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
+  ASSERT(!dstL.is(dstH));
+  emit(cond | B23 | B22 | s | dstH.code()*B16 | dstL.code()*B12 |
+       src2.code()*B8 | B7 | B4 | src1.code());
+}
+
+
+void Assembler::umlal(Register dstL,
+                      Register dstH,
+                      Register src1,
+                      Register src2,
+                      SBit s,
+                      Condition cond) {
+  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
+  ASSERT(!dstL.is(dstH));
+  emit(cond | B23 | A | s | dstH.code()*B16 | dstL.code()*B12 |
+       src2.code()*B8 | B7 | B4 | src1.code());
+}
+
+
+void Assembler::umull(Register dstL,
+                      Register dstH,
+                      Register src1,
+                      Register src2,
+                      SBit s,
+                      Condition cond) {
+  ASSERT(!dstL.is(pc) && !dstH.is(pc) && !src1.is(pc) && !src2.is(pc));
+  ASSERT(!dstL.is(dstH));
+  emit(cond | B23 | s | dstH.code()*B16 | dstL.code()*B12 |
+       src2.code()*B8 | B7 | B4 | src1.code());
+}
+
+
+// Miscellaneous arithmetic instructions.
+void Assembler::clz(Register dst, Register src, Condition cond) {
+  // v5 and above.
+  ASSERT(!dst.is(pc) && !src.is(pc));
+  emit(cond | B24 | B22 | B21 | 15*B16 | dst.code()*B12 |
+       15*B8 | CLZ | src.code());
+}
+
+
+// Saturating instructions.
+
+// Unsigned saturate.
+void Assembler::usat(Register dst,
+                     int satpos,
+                     const Operand& src,
+                     Condition cond) {
+  // v6 and above.
+  ASSERT(CpuFeatures::IsSupported(ARMv7));
+  ASSERT(!dst.is(pc) && !src.rm_.is(pc));
+  ASSERT((satpos >= 0) && (satpos <= 31));
+  ASSERT((src.shift_op_ == ASR) || (src.shift_op_ == LSL));
+  ASSERT(src.rs_.is(no_reg));
+
+  int sh = 0;
+  if (src.shift_op_ == ASR) {
+      sh = 1;
+  }
+
+  emit(cond | 0x6*B24 | 0xe*B20 | satpos*B16 | dst.code()*B12 |
+       src.shift_imm_*B7 | sh*B6 | 0x1*B4 | src.rm_.code());
+}
+
+
+// Bitfield manipulation instructions.
+
+// Unsigned bit field extract.
+// Extracts #width adjacent bits from position #lsb in a register, and
+// writes them to the low bits of a destination register.
+//   ubfx dst, src, #lsb, #width
+void Assembler::ubfx(Register dst,
+                     Register src,
+                     int lsb,
+                     int width,
+                     Condition cond) {
+  // v7 and above.
+  ASSERT(CpuFeatures::IsSupported(ARMv7));
+  ASSERT(!dst.is(pc) && !src.is(pc));
+  ASSERT((lsb >= 0) && (lsb <= 31));
+  ASSERT((width >= 1) && (width <= (32 - lsb)));
+  emit(cond | 0xf*B23 | B22 | B21 | (width - 1)*B16 | dst.code()*B12 |
+       lsb*B7 | B6 | B4 | src.code());
+}
+
+
+// Signed bit field extract.
+// Extracts #width adjacent bits from position #lsb in a register, and
+// writes them to the low bits of a destination register. The extracted
+// value is sign extended to fill the destination register.
+//   sbfx dst, src, #lsb, #width
+void Assembler::sbfx(Register dst,
+                     Register src,
+                     int lsb,
+                     int width,
+                     Condition cond) {
+  // v7 and above.
+  ASSERT(CpuFeatures::IsSupported(ARMv7));
+  ASSERT(!dst.is(pc) && !src.is(pc));
+  ASSERT((lsb >= 0) && (lsb <= 31));
+  ASSERT((width >= 1) && (width <= (32 - lsb)));
+  emit(cond | 0xf*B23 | B21 | (width - 1)*B16 | dst.code()*B12 |
+       lsb*B7 | B6 | B4 | src.code());
+}
+
+
+// Bit field clear.
+// Sets #width adjacent bits at position #lsb in the destination register
+// to zero, preserving the value of the other bits.
+//   bfc dst, #lsb, #width
+void Assembler::bfc(Register dst, int lsb, int width, Condition cond) {
+  // v7 and above.
+  ASSERT(CpuFeatures::IsSupported(ARMv7));
+  ASSERT(!dst.is(pc));
+  ASSERT((lsb >= 0) && (lsb <= 31));
+  ASSERT((width >= 1) && (width <= (32 - lsb)));
+  int msb = lsb + width - 1;
+  emit(cond | 0x1f*B22 | msb*B16 | dst.code()*B12 | lsb*B7 | B4 | 0xf);
+}
+
+
+// Bit field insert.
+// Inserts #width adjacent bits from the low bits of the source register
+// into position #lsb of the destination register.
+//   bfi dst, src, #lsb, #width
+void Assembler::bfi(Register dst,
+                    Register src,
+                    int lsb,
+                    int width,
+                    Condition cond) {
+  // v7 and above.
+  ASSERT(CpuFeatures::IsSupported(ARMv7));
+  ASSERT(!dst.is(pc) && !src.is(pc));
+  ASSERT((lsb >= 0) && (lsb <= 31));
+  ASSERT((width >= 1) && (width <= (32 - lsb)));
+  int msb = lsb + width - 1;
+  emit(cond | 0x1f*B22 | msb*B16 | dst.code()*B12 | lsb*B7 | B4 |
+       src.code());
+}
+
+
+// Status register access instructions.
+void Assembler::mrs(Register dst, SRegister s, Condition cond) {
+  ASSERT(!dst.is(pc));
+  emit(cond | B24 | s | 15*B16 | dst.code()*B12);
+}
+
+
+void Assembler::msr(SRegisterFieldMask fields, const Operand& src,
+                    Condition cond) {
+  ASSERT(fields >= B16 && fields < B20);  // at least one field set
+  Instr instr;
+  if (!src.rm_.is_valid()) {
+    // Immediate.
+    uint32_t rotate_imm;
+    uint32_t immed_8;
+    if (src.must_use_constant_pool() ||
+        !fits_shifter(src.imm32_, &rotate_imm, &immed_8, NULL)) {
+      // Immediate operand cannot be encoded, load it first to register ip.
+      RecordRelocInfo(src.rmode_, src.imm32_);
+      ldr(ip, MemOperand(pc, 0), cond);
+      msr(fields, Operand(ip), cond);
+      return;
+    }
+    instr = I | rotate_imm*B8 | immed_8;
+  } else {
+    ASSERT(!src.rs_.is_valid() && src.shift_imm_ == 0);  // only rm allowed
+    instr = src.rm_.code();
+  }
+  emit(cond | instr | B24 | B21 | fields | 15*B12);
+}
+
+
+// Load/Store instructions.
+void Assembler::ldr(Register dst, const MemOperand& src, Condition cond) {
+  if (dst.is(pc)) {
+    positions_recorder()->WriteRecordedPositions();
+  }
+  addrmod2(cond | B26 | L, dst, src);
+
+  // Eliminate pattern: push(ry), pop(rx)
+  //   str(ry, MemOperand(sp, 4, NegPreIndex), al)
+  //   ldr(rx, MemOperand(sp, 4, PostIndex), al)
+  // Both instructions can be eliminated if ry = rx.
+  // If ry != rx, a register copy from ry to rx is inserted
+  // after eliminating the push and the pop instructions.
+  if (can_peephole_optimize(2)) {
+    Instr push_instr = instr_at(pc_ - 2 * kInstrSize);
+    Instr pop_instr = instr_at(pc_ - 1 * kInstrSize);
+
+    if (IsPush(push_instr) && IsPop(pop_instr)) {
+      if (Instruction::RdValue(pop_instr) != Instruction::RdValue(push_instr)) {
+        // For consecutive push and pop on different registers,
+        // we delete both the push & pop and insert a register move.
+        // push ry, pop rx --> mov rx, ry
+        Register reg_pushed, reg_popped;
+        reg_pushed = GetRd(push_instr);
+        reg_popped = GetRd(pop_instr);
+        pc_ -= 2 * kInstrSize;
+        // Insert a mov instruction, which is better than a pair of push & pop
+        mov(reg_popped, reg_pushed);
+        if (FLAG_print_peephole_optimization) {
+          PrintF("%x push/pop (diff reg) replaced by a reg move\n",
+                 pc_offset());
+        }
+      } else {
+        // For consecutive push and pop on the same register,
+        // both the push and the pop can be deleted.
+        pc_ -= 2 * kInstrSize;
+        if (FLAG_print_peephole_optimization) {
+          PrintF("%x push/pop (same reg) eliminated\n", pc_offset());
+        }
+      }
+    }
+  }
+
+  if (can_peephole_optimize(2)) {
+    Instr str_instr = instr_at(pc_ - 2 * kInstrSize);
+    Instr ldr_instr = instr_at(pc_ - 1 * kInstrSize);
+
+    if ((IsStrRegFpOffset(str_instr) &&
+         IsLdrRegFpOffset(ldr_instr)) ||
+       (IsStrRegFpNegOffset(str_instr) &&
+         IsLdrRegFpNegOffset(ldr_instr))) {
+      if ((ldr_instr & kLdrStrInstrArgumentMask) ==
+            (str_instr & kLdrStrInstrArgumentMask)) {
+        // Pattern: Ldr/str same fp+offset, same register.
+        //
+        // The following:
+        // str rx, [fp, #-12]
+        // ldr rx, [fp, #-12]
+        //
+        // Becomes:
+        // str rx, [fp, #-12]
+
+        pc_ -= 1 * kInstrSize;
+        if (FLAG_print_peephole_optimization) {
+          PrintF("%x str/ldr (fp + same offset), same reg\n", pc_offset());
+        }
+      } else if ((ldr_instr & kLdrStrOffsetMask) ==
+                 (str_instr & kLdrStrOffsetMask)) {
+        // Pattern: Ldr/str same fp+offset, different register.
+        //
+        // The following:
+        // str rx, [fp, #-12]
+        // ldr ry, [fp, #-12]
+        //
+        // Becomes:
+        // str rx, [fp, #-12]
+        // mov ry, rx
+
+        Register reg_stored, reg_loaded;
+        reg_stored = GetRd(str_instr);
+        reg_loaded = GetRd(ldr_instr);
+        pc_ -= 1 * kInstrSize;
+        // Insert a mov instruction, which is better than ldr.
+        mov(reg_loaded, reg_stored);
+        if (FLAG_print_peephole_optimization) {
+          PrintF("%x str/ldr (fp + same offset), diff reg \n", pc_offset());
+        }
+      }
+    }
+  }
+
+  if (can_peephole_optimize(3)) {
+    Instr mem_write_instr = instr_at(pc_ - 3 * kInstrSize);
+    Instr ldr_instr = instr_at(pc_ - 2 * kInstrSize);
+    Instr mem_read_instr = instr_at(pc_ - 1 * kInstrSize);
+    if (IsPush(mem_write_instr) &&
+        IsPop(mem_read_instr)) {
+      if ((IsLdrRegFpOffset(ldr_instr) ||
+        IsLdrRegFpNegOffset(ldr_instr))) {
+        if (Instruction::RdValue(mem_write_instr) ==
+                                  Instruction::RdValue(mem_read_instr)) {
+          // Pattern: push & pop from/to same register,
+          // with a fp+offset ldr in between
+          //
+          // The following:
+          // str rx, [sp, #-4]!
+          // ldr rz, [fp, #-24]
+          // ldr rx, [sp], #+4
+          //
+          // Becomes:
+          // if(rx == rz)
+          //   delete all
+          // else
+          //   ldr rz, [fp, #-24]
+
+          if (Instruction::RdValue(mem_write_instr) ==
+              Instruction::RdValue(ldr_instr)) {
+            pc_ -= 3 * kInstrSize;
+          } else {
+            pc_ -= 3 * kInstrSize;
+            // Reinsert back the ldr rz.
+            emit(ldr_instr);
+          }
+          if (FLAG_print_peephole_optimization) {
+            PrintF("%x push/pop -dead ldr fp+offset in middle\n", pc_offset());
+          }
+        } else {
+          // Pattern: push & pop from/to different registers
+          // with a fp+offset ldr in between
+          //
+          // The following:
+          // str rx, [sp, #-4]!
+          // ldr rz, [fp, #-24]
+          // ldr ry, [sp], #+4
+          //
+          // Becomes:
+          // if(ry == rz)
+          //   mov ry, rx;
+          // else if(rx != rz)
+          //   ldr rz, [fp, #-24]
+          //   mov ry, rx
+          // else if((ry != rz) || (rx == rz)) becomes:
+          //   mov ry, rx
+          //   ldr rz, [fp, #-24]
+
+          Register reg_pushed, reg_popped;
+          if (Instruction::RdValue(mem_read_instr) ==
+              Instruction::RdValue(ldr_instr)) {
+            reg_pushed = GetRd(mem_write_instr);
+            reg_popped = GetRd(mem_read_instr);
+            pc_ -= 3 * kInstrSize;
+            mov(reg_popped, reg_pushed);
+          } else if (Instruction::RdValue(mem_write_instr) !=
+                     Instruction::RdValue(ldr_instr)) {
+            reg_pushed = GetRd(mem_write_instr);
+            reg_popped = GetRd(mem_read_instr);
+            pc_ -= 3 * kInstrSize;
+            emit(ldr_instr);
+            mov(reg_popped, reg_pushed);
+          } else if ((Instruction::RdValue(mem_read_instr) !=
+                      Instruction::RdValue(ldr_instr)) ||
+                     (Instruction::RdValue(mem_write_instr) ==
+                      Instruction::RdValue(ldr_instr))) {
+            reg_pushed = GetRd(mem_write_instr);
+            reg_popped = GetRd(mem_read_instr);
+            pc_ -= 3 * kInstrSize;
+            mov(reg_popped, reg_pushed);
+            emit(ldr_instr);
+          }
+          if (FLAG_print_peephole_optimization) {
+            PrintF("%x push/pop (ldr fp+off in middle)\n", pc_offset());
+          }
+        }
+      }
+    }
+  }
+}
+
+
+void Assembler::str(Register src, const MemOperand& dst, Condition cond) {
+  addrmod2(cond | B26, src, dst);
+
+  // Eliminate pattern: pop(), push(r)
+  //     add sp, sp, #4 LeaveCC, al; str r, [sp, #-4], al
+  // ->  str r, [sp, 0], al
+  if (can_peephole_optimize(2) &&
+     // Pattern.
+     instr_at(pc_ - 1 * kInstrSize) == (kPushRegPattern | src.code() * B12) &&
+     instr_at(pc_ - 2 * kInstrSize) == kPopInstruction) {
+    pc_ -= 2 * kInstrSize;
+    emit(al | B26 | 0 | Offset | sp.code() * B16 | src.code() * B12);
+    if (FLAG_print_peephole_optimization) {
+      PrintF("%x pop()/push(reg) eliminated\n", pc_offset());
+    }
+  }
+}
+
+
+void Assembler::ldrb(Register dst, const MemOperand& src, Condition cond) {
+  addrmod2(cond | B26 | B | L, dst, src);
+}
+
+
+void Assembler::strb(Register src, const MemOperand& dst, Condition cond) {
+  addrmod2(cond | B26 | B, src, dst);
+}
+
+
+void Assembler::ldrh(Register dst, const MemOperand& src, Condition cond) {
+  addrmod3(cond | L | B7 | H | B4, dst, src);
+}
+
+
+void Assembler::strh(Register src, const MemOperand& dst, Condition cond) {
+  addrmod3(cond | B7 | H | B4, src, dst);
+}
+
+
+void Assembler::ldrsb(Register dst, const MemOperand& src, Condition cond) {
+  addrmod3(cond | L | B7 | S6 | B4, dst, src);
+}
+
+
+void Assembler::ldrsh(Register dst, const MemOperand& src, Condition cond) {
+  addrmod3(cond | L | B7 | S6 | H | B4, dst, src);
+}
+
+
+void Assembler::ldrd(Register dst1, Register dst2,
+                     const MemOperand& src, Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(ARMv7));
+  ASSERT(src.rm().is(no_reg));
+  ASSERT(!dst1.is(lr));  // r14.
+  ASSERT_EQ(0, dst1.code() % 2);
+  ASSERT_EQ(dst1.code() + 1, dst2.code());
+  addrmod3(cond | B7 | B6 | B4, dst1, src);
+}
+
+
+void Assembler::strd(Register src1, Register src2,
+                     const MemOperand& dst, Condition cond) {
+  ASSERT(dst.rm().is(no_reg));
+  ASSERT(!src1.is(lr));  // r14.
+  ASSERT_EQ(0, src1.code() % 2);
+  ASSERT_EQ(src1.code() + 1, src2.code());
+  ASSERT(CpuFeatures::IsEnabled(ARMv7));
+  addrmod3(cond | B7 | B6 | B5 | B4, src1, dst);
+}
+
+// Load/Store multiple instructions.
+void Assembler::ldm(BlockAddrMode am,
+                    Register base,
+                    RegList dst,
+                    Condition cond) {
+  // ABI stack constraint: ldmxx base, {..sp..}  base != sp  is not restartable.
+  ASSERT(base.is(sp) || (dst & sp.bit()) == 0);
+
+  addrmod4(cond | B27 | am | L, base, dst);
+
+  // Emit the constant pool after a function return implemented by ldm ..{..pc}.
+  if (cond == al && (dst & pc.bit()) != 0) {
+    // There is a slight chance that the ldm instruction was actually a call,
+    // in which case it would be wrong to return into the constant pool; we
+    // recognize this case by checking if the emission of the pool was blocked
+    // at the pc of the ldm instruction by a mov lr, pc instruction; if this is
+    // the case, we emit a jump over the pool.
+    CheckConstPool(true, no_const_pool_before_ == pc_offset() - kInstrSize);
+  }
+}
+
+
+void Assembler::stm(BlockAddrMode am,
+                    Register base,
+                    RegList src,
+                    Condition cond) {
+  addrmod4(cond | B27 | am, base, src);
+}
+
+
+// Exception-generating instructions and debugging support.
+// Stops with a non-negative code less than kNumOfWatchedStops support
+// enabling/disabling and a counter feature. See simulator-arm.h .
+void Assembler::stop(const char* msg, Condition cond, int32_t code) {
+#ifndef __arm__
+  ASSERT(code >= kDefaultStopCode);
+  // The Simulator will handle the stop instruction and get the message address.
+  // It expects to find the address just after the svc instruction.
+  BlockConstPoolFor(2);
+  if (code >= 0) {
+    svc(kStopCode + code, cond);
+  } else {
+    svc(kStopCode + kMaxStopCode, cond);
+  }
+  emit(reinterpret_cast<Instr>(msg));
+#else  // def __arm__
+#ifdef CAN_USE_ARMV5_INSTRUCTIONS
+  if (cond != al) {
+    Label skip;
+    b(&skip, NegateCondition(cond));
+    bkpt(0);
+    bind(&skip);
+  } else {
+    bkpt(0);
+  }
+#else  // ndef CAN_USE_ARMV5_INSTRUCTIONS
+  svc(0x9f0001, cond);
+#endif  // ndef CAN_USE_ARMV5_INSTRUCTIONS
+#endif  // def __arm__
+}
+
+
+void Assembler::bkpt(uint32_t imm16) {  // v5 and above
+  ASSERT(is_uint16(imm16));
+  emit(al | B24 | B21 | (imm16 >> 4)*B8 | BKPT | (imm16 & 0xf));
+}
+
+
+void Assembler::svc(uint32_t imm24, Condition cond) {
+  ASSERT(is_uint24(imm24));
+  emit(cond | 15*B24 | imm24);
+}
+
+
+// Coprocessor instructions.
+void Assembler::cdp(Coprocessor coproc,
+                    int opcode_1,
+                    CRegister crd,
+                    CRegister crn,
+                    CRegister crm,
+                    int opcode_2,
+                    Condition cond) {
+  ASSERT(is_uint4(opcode_1) && is_uint3(opcode_2));
+  emit(cond | B27 | B26 | B25 | (opcode_1 & 15)*B20 | crn.code()*B16 |
+       crd.code()*B12 | coproc*B8 | (opcode_2 & 7)*B5 | crm.code());
+}
+
+
+void Assembler::cdp2(Coprocessor coproc,
+                     int opcode_1,
+                     CRegister crd,
+                     CRegister crn,
+                     CRegister crm,
+                     int opcode_2) {  // v5 and above
+  cdp(coproc, opcode_1, crd, crn, crm, opcode_2, kSpecialCondition);
+}
+
+
+void Assembler::mcr(Coprocessor coproc,
+                    int opcode_1,
+                    Register rd,
+                    CRegister crn,
+                    CRegister crm,
+                    int opcode_2,
+                    Condition cond) {
+  ASSERT(is_uint3(opcode_1) && is_uint3(opcode_2));
+  emit(cond | B27 | B26 | B25 | (opcode_1 & 7)*B21 | crn.code()*B16 |
+       rd.code()*B12 | coproc*B8 | (opcode_2 & 7)*B5 | B4 | crm.code());
+}
+
+
+void Assembler::mcr2(Coprocessor coproc,
+                     int opcode_1,
+                     Register rd,
+                     CRegister crn,
+                     CRegister crm,
+                     int opcode_2) {  // v5 and above
+  mcr(coproc, opcode_1, rd, crn, crm, opcode_2, kSpecialCondition);
+}
+
+
+void Assembler::mrc(Coprocessor coproc,
+                    int opcode_1,
+                    Register rd,
+                    CRegister crn,
+                    CRegister crm,
+                    int opcode_2,
+                    Condition cond) {
+  ASSERT(is_uint3(opcode_1) && is_uint3(opcode_2));
+  emit(cond | B27 | B26 | B25 | (opcode_1 & 7)*B21 | L | crn.code()*B16 |
+       rd.code()*B12 | coproc*B8 | (opcode_2 & 7)*B5 | B4 | crm.code());
+}
+
+
+void Assembler::mrc2(Coprocessor coproc,
+                     int opcode_1,
+                     Register rd,
+                     CRegister crn,
+                     CRegister crm,
+                     int opcode_2) {  // v5 and above
+  mrc(coproc, opcode_1, rd, crn, crm, opcode_2, kSpecialCondition);
+}
+
+
+void Assembler::ldc(Coprocessor coproc,
+                    CRegister crd,
+                    const MemOperand& src,
+                    LFlag l,
+                    Condition cond) {
+  addrmod5(cond | B27 | B26 | l | L | coproc*B8, crd, src);
+}
+
+
+void Assembler::ldc(Coprocessor coproc,
+                    CRegister crd,
+                    Register rn,
+                    int option,
+                    LFlag l,
+                    Condition cond) {
+  // Unindexed addressing.
+  ASSERT(is_uint8(option));
+  emit(cond | B27 | B26 | U | l | L | rn.code()*B16 | crd.code()*B12 |
+       coproc*B8 | (option & 255));
+}
+
+
+void Assembler::ldc2(Coprocessor coproc,
+                     CRegister crd,
+                     const MemOperand& src,
+                     LFlag l) {  // v5 and above
+  ldc(coproc, crd, src, l, kSpecialCondition);
+}
+
+
+void Assembler::ldc2(Coprocessor coproc,
+                     CRegister crd,
+                     Register rn,
+                     int option,
+                     LFlag l) {  // v5 and above
+  ldc(coproc, crd, rn, option, l, kSpecialCondition);
+}
+
+
+void Assembler::stc(Coprocessor coproc,
+                    CRegister crd,
+                    const MemOperand& dst,
+                    LFlag l,
+                    Condition cond) {
+  addrmod5(cond | B27 | B26 | l | coproc*B8, crd, dst);
+}
+
+
+void Assembler::stc(Coprocessor coproc,
+                    CRegister crd,
+                    Register rn,
+                    int option,
+                    LFlag l,
+                    Condition cond) {
+  // Unindexed addressing.
+  ASSERT(is_uint8(option));
+  emit(cond | B27 | B26 | U | l | rn.code()*B16 | crd.code()*B12 |
+       coproc*B8 | (option & 255));
+}
+
+
+void Assembler::stc2(Coprocessor
+                     coproc, CRegister crd,
+                     const MemOperand& dst,
+                     LFlag l) {  // v5 and above
+  stc(coproc, crd, dst, l, kSpecialCondition);
+}
+
+
+void Assembler::stc2(Coprocessor coproc,
+                     CRegister crd,
+                     Register rn,
+                     int option,
+                     LFlag l) {  // v5 and above
+  stc(coproc, crd, rn, option, l, kSpecialCondition);
+}
+
+
+// Support for VFP.
+
+void Assembler::vldr(const DwVfpRegister dst,
+                     const Register base,
+                     int offset,
+                     const Condition cond) {
+  // Ddst = MEM(Rbase + offset).
+  // Instruction details available in ARM DDI 0406A, A8-628.
+  // cond(31-28) | 1101(27-24)| U001(23-20) | Rbase(19-16) |
+  // Vdst(15-12) | 1011(11-8) | offset
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  int u = 1;
+  if (offset < 0) {
+    offset = -offset;
+    u = 0;
+  }
+
+  ASSERT(offset >= 0);
+  if ((offset % 4) == 0 && (offset / 4) < 256) {
+    emit(cond | u*B23 | 0xD1*B20 | base.code()*B16 | dst.code()*B12 |
+         0xB*B8 | ((offset / 4) & 255));
+  } else {
+    // Larger offsets must be handled by computing the correct address
+    // in the ip register.
+    ASSERT(!base.is(ip));
+    if (u == 1) {
+      add(ip, base, Operand(offset));
+    } else {
+      sub(ip, base, Operand(offset));
+    }
+    emit(cond | 0xD1*B20 | ip.code()*B16 | dst.code()*B12 | 0xB*B8);
+  }
+}
+
+
+void Assembler::vldr(const DwVfpRegister dst,
+                     const MemOperand& operand,
+                     const Condition cond) {
+  ASSERT(!operand.rm().is_valid());
+  ASSERT(operand.am_ == Offset);
+  vldr(dst, operand.rn(), operand.offset(), cond);
+}
+
+
+void Assembler::vldr(const SwVfpRegister dst,
+                     const Register base,
+                     int offset,
+                     const Condition cond) {
+  // Sdst = MEM(Rbase + offset).
+  // Instruction details available in ARM DDI 0406A, A8-628.
+  // cond(31-28) | 1101(27-24)| U001(23-20) | Rbase(19-16) |
+  // Vdst(15-12) | 1010(11-8) | offset
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  int u = 1;
+  if (offset < 0) {
+    offset = -offset;
+    u = 0;
+  }
+  int sd, d;
+  dst.split_code(&sd, &d);
+  ASSERT(offset >= 0);
+
+  if ((offset % 4) == 0 && (offset / 4) < 256) {
+  emit(cond | u*B23 | d*B22 | 0xD1*B20 | base.code()*B16 | sd*B12 |
+       0xA*B8 | ((offset / 4) & 255));
+  } else {
+    // Larger offsets must be handled by computing the correct address
+    // in the ip register.
+    ASSERT(!base.is(ip));
+    if (u == 1) {
+      add(ip, base, Operand(offset));
+    } else {
+      sub(ip, base, Operand(offset));
+    }
+    emit(cond | d*B22 | 0xD1*B20 | ip.code()*B16 | sd*B12 | 0xA*B8);
+  }
+}
+
+
+void Assembler::vldr(const SwVfpRegister dst,
+                     const MemOperand& operand,
+                     const Condition cond) {
+  ASSERT(!operand.rm().is_valid());
+  ASSERT(operand.am_ == Offset);
+  vldr(dst, operand.rn(), operand.offset(), cond);
+}
+
+
+void Assembler::vstr(const DwVfpRegister src,
+                     const Register base,
+                     int offset,
+                     const Condition cond) {
+  // MEM(Rbase + offset) = Dsrc.
+  // Instruction details available in ARM DDI 0406A, A8-786.
+  // cond(31-28) | 1101(27-24)| U000(23-20) | | Rbase(19-16) |
+  // Vsrc(15-12) | 1011(11-8) | (offset/4)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  int u = 1;
+  if (offset < 0) {
+    offset = -offset;
+    u = 0;
+  }
+  ASSERT(offset >= 0);
+  if ((offset % 4) == 0 && (offset / 4) < 256) {
+    emit(cond | u*B23 | 0xD0*B20 | base.code()*B16 | src.code()*B12 |
+         0xB*B8 | ((offset / 4) & 255));
+  } else {
+    // Larger offsets must be handled by computing the correct address
+    // in the ip register.
+    ASSERT(!base.is(ip));
+    if (u == 1) {
+      add(ip, base, Operand(offset));
+    } else {
+      sub(ip, base, Operand(offset));
+    }
+    emit(cond | 0xD0*B20 | ip.code()*B16 | src.code()*B12 | 0xB*B8);
+  }
+}
+
+
+void Assembler::vstr(const DwVfpRegister src,
+                     const MemOperand& operand,
+                     const Condition cond) {
+  ASSERT(!operand.rm().is_valid());
+  ASSERT(operand.am_ == Offset);
+  vstr(src, operand.rn(), operand.offset(), cond);
+}
+
+
+void Assembler::vstr(const SwVfpRegister src,
+                     const Register base,
+                     int offset,
+                     const Condition cond) {
+  // MEM(Rbase + offset) = SSrc.
+  // Instruction details available in ARM DDI 0406A, A8-786.
+  // cond(31-28) | 1101(27-24)| U000(23-20) | Rbase(19-16) |
+  // Vdst(15-12) | 1010(11-8) | (offset/4)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  int u = 1;
+  if (offset < 0) {
+    offset = -offset;
+    u = 0;
+  }
+  int sd, d;
+  src.split_code(&sd, &d);
+  ASSERT(offset >= 0);
+  if ((offset % 4) == 0 && (offset / 4) < 256) {
+    emit(cond | u*B23 | d*B22 | 0xD0*B20 | base.code()*B16 | sd*B12 |
+         0xA*B8 | ((offset / 4) & 255));
+  } else {
+    // Larger offsets must be handled by computing the correct address
+    // in the ip register.
+    ASSERT(!base.is(ip));
+    if (u == 1) {
+      add(ip, base, Operand(offset));
+    } else {
+      sub(ip, base, Operand(offset));
+    }
+    emit(cond | d*B22 | 0xD0*B20 | ip.code()*B16 | sd*B12 | 0xA*B8);
+  }
+}
+
+
+void Assembler::vstr(const SwVfpRegister src,
+                     const MemOperand& operand,
+                     const Condition cond) {
+  ASSERT(!operand.rm().is_valid());
+  ASSERT(operand.am_ == Offset);
+  vldr(src, operand.rn(), operand.offset(), cond);
+}
+
+
+static void DoubleAsTwoUInt32(double d, uint32_t* lo, uint32_t* hi) {
+  uint64_t i;
+  memcpy(&i, &d, 8);
+
+  *lo = i & 0xffffffff;
+  *hi = i >> 32;
+}
+
+// Only works for little endian floating point formats.
+// We don't support VFP on the mixed endian floating point platform.
+static bool FitsVMOVDoubleImmediate(double d, uint32_t *encoding) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+
+  // VMOV can accept an immediate of the form:
+  //
+  //  +/- m * 2^(-n) where 16 <= m <= 31 and 0 <= n <= 7
+  //
+  // The immediate is encoded using an 8-bit quantity, comprised of two
+  // 4-bit fields. For an 8-bit immediate of the form:
+  //
+  //  [abcdefgh]
+  //
+  // where a is the MSB and h is the LSB, an immediate 64-bit double can be
+  // created of the form:
+  //
+  //  [aBbbbbbb,bbcdefgh,00000000,00000000,
+  //      00000000,00000000,00000000,00000000]
+  //
+  // where B = ~b.
+  //
+
+  uint32_t lo, hi;
+  DoubleAsTwoUInt32(d, &lo, &hi);
+
+  // The most obvious constraint is the long block of zeroes.
+  if ((lo != 0) || ((hi & 0xffff) != 0)) {
+    return false;
+  }
+
+  // Bits 62:55 must be all clear or all set.
+  if (((hi & 0x3fc00000) != 0) && ((hi & 0x3fc00000) != 0x3fc00000)) {
+    return false;
+  }
+
+  // Bit 63 must be NOT bit 62.
+  if (((hi ^ (hi << 1)) & (0x40000000)) == 0) {
+    return false;
+  }
+
+  // Create the encoded immediate in the form:
+  //  [00000000,0000abcd,00000000,0000efgh]
+  *encoding  = (hi >> 16) & 0xf;      // Low nybble.
+  *encoding |= (hi >> 4) & 0x70000;   // Low three bits of the high nybble.
+  *encoding |= (hi >> 12) & 0x80000;  // Top bit of the high nybble.
+
+  return true;
+}
+
+
+void Assembler::vmov(const DwVfpRegister dst,
+                     double imm,
+                     const Condition cond) {
+  // Dd = immediate
+  // Instruction details available in ARM DDI 0406B, A8-640.
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+
+  uint32_t enc;
+  if (FitsVMOVDoubleImmediate(imm, &enc)) {
+    // The double can be encoded in the instruction.
+    emit(cond | 0xE*B24 | 0xB*B20 | dst.code()*B12 | 0xB*B8 | enc);
+  } else {
+    // Synthesise the double from ARM immediates. This could be implemented
+    // using vldr from a constant pool.
+    uint32_t lo, hi;
+    DoubleAsTwoUInt32(imm, &lo, &hi);
+
+    if (lo == hi) {
+      // If the lo and hi parts of the double are equal, the literal is easier
+      // to create. This is the case with 0.0.
+      mov(ip, Operand(lo));
+      vmov(dst, ip, ip);
+    } else {
+      // Move the low part of the double into the lower of the corresponsing S
+      // registers of D register dst.
+      mov(ip, Operand(lo));
+      vmov(dst.low(), ip, cond);
+
+      // Move the high part of the double into the higher of the corresponsing S
+      // registers of D register dst.
+      mov(ip, Operand(hi));
+      vmov(dst.high(), ip, cond);
+    }
+  }
+}
+
+
+void Assembler::vmov(const SwVfpRegister dst,
+                     const SwVfpRegister src,
+                     const Condition cond) {
+  // Sd = Sm
+  // Instruction details available in ARM DDI 0406B, A8-642.
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  int sd, d, sm, m;
+  dst.split_code(&sd, &d);
+  src.split_code(&sm, &m);
+  emit(cond | 0xE*B24 | d*B22 | 0xB*B20 | sd*B12 | 0xA*B8 | B6 | m*B5 | sm);
+}
+
+
+void Assembler::vmov(const DwVfpRegister dst,
+                     const DwVfpRegister src,
+                     const Condition cond) {
+  // Dd = Dm
+  // Instruction details available in ARM DDI 0406B, A8-642.
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | 0xB*B20 |
+       dst.code()*B12 | 0x5*B9 | B8 | B6 | src.code());
+}
+
+
+void Assembler::vmov(const DwVfpRegister dst,
+                     const Register src1,
+                     const Register src2,
+                     const Condition cond) {
+  // Dm = <Rt,Rt2>.
+  // Instruction details available in ARM DDI 0406A, A8-646.
+  // cond(31-28) | 1100(27-24)| 010(23-21) | op=0(20) | Rt2(19-16) |
+  // Rt(15-12) | 1011(11-8) | 00(7-6) | M(5) | 1(4) | Vm
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  ASSERT(!src1.is(pc) && !src2.is(pc));
+  emit(cond | 0xC*B24 | B22 | src2.code()*B16 |
+       src1.code()*B12 | 0xB*B8 | B4 | dst.code());
+}
+
+
+void Assembler::vmov(const Register dst1,
+                     const Register dst2,
+                     const DwVfpRegister src,
+                     const Condition cond) {
+  // <Rt,Rt2> = Dm.
+  // Instruction details available in ARM DDI 0406A, A8-646.
+  // cond(31-28) | 1100(27-24)| 010(23-21) | op=1(20) | Rt2(19-16) |
+  // Rt(15-12) | 1011(11-8) | 00(7-6) | M(5) | 1(4) | Vm
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  ASSERT(!dst1.is(pc) && !dst2.is(pc));
+  emit(cond | 0xC*B24 | B22 | B20 | dst2.code()*B16 |
+       dst1.code()*B12 | 0xB*B8 | B4 | src.code());
+}
+
+
+void Assembler::vmov(const SwVfpRegister dst,
+                     const Register src,
+                     const Condition cond) {
+  // Sn = Rt.
+  // Instruction details available in ARM DDI 0406A, A8-642.
+  // cond(31-28) | 1110(27-24)| 000(23-21) | op=0(20) | Vn(19-16) |
+  // Rt(15-12) | 1010(11-8) | N(7)=0 | 00(6-5) | 1(4) | 0000(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  ASSERT(!src.is(pc));
+  int sn, n;
+  dst.split_code(&sn, &n);
+  emit(cond | 0xE*B24 | sn*B16 | src.code()*B12 | 0xA*B8 | n*B7 | B4);
+}
+
+
+void Assembler::vmov(const Register dst,
+                     const SwVfpRegister src,
+                     const Condition cond) {
+  // Rt = Sn.
+  // Instruction details available in ARM DDI 0406A, A8-642.
+  // cond(31-28) | 1110(27-24)| 000(23-21) | op=1(20) | Vn(19-16) |
+  // Rt(15-12) | 1010(11-8) | N(7)=0 | 00(6-5) | 1(4) | 0000(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  ASSERT(!dst.is(pc));
+  int sn, n;
+  src.split_code(&sn, &n);
+  emit(cond | 0xE*B24 | B20 | sn*B16 | dst.code()*B12 | 0xA*B8 | n*B7 | B4);
+}
+
+
+// Type of data to read from or write to VFP register.
+// Used as specifier in generic vcvt instruction.
+enum VFPType { S32, U32, F32, F64 };
+
+
+static bool IsSignedVFPType(VFPType type) {
+  switch (type) {
+    case S32:
+      return true;
+    case U32:
+      return false;
+    default:
+      UNREACHABLE();
+      return false;
+  }
+}
+
+
+static bool IsIntegerVFPType(VFPType type) {
+  switch (type) {
+    case S32:
+    case U32:
+      return true;
+    case F32:
+    case F64:
+      return false;
+    default:
+      UNREACHABLE();
+      return false;
+  }
+}
+
+
+static bool IsDoubleVFPType(VFPType type) {
+  switch (type) {
+    case F32:
+      return false;
+    case F64:
+      return true;
+    default:
+      UNREACHABLE();
+      return false;
+  }
+}
+
+
+// Split five bit reg_code based on size of reg_type.
+//  32-bit register codes are Vm:M
+//  64-bit register codes are M:Vm
+// where Vm is four bits, and M is a single bit.
+static void SplitRegCode(VFPType reg_type,
+                         int reg_code,
+                         int* vm,
+                         int* m) {
+  ASSERT((reg_code >= 0) && (reg_code <= 31));
+  if (IsIntegerVFPType(reg_type) || !IsDoubleVFPType(reg_type)) {
+    // 32 bit type.
+    *m  = reg_code & 0x1;
+    *vm = reg_code >> 1;
+  } else {
+    // 64 bit type.
+    *m  = (reg_code & 0x10) >> 4;
+    *vm = reg_code & 0x0F;
+  }
+}
+
+
+// Encode vcvt.src_type.dst_type instruction.
+static Instr EncodeVCVT(const VFPType dst_type,
+                        const int dst_code,
+                        const VFPType src_type,
+                        const int src_code,
+                        VFPConversionMode mode,
+                        const Condition cond) {
+  ASSERT(src_type != dst_type);
+  int D, Vd, M, Vm;
+  SplitRegCode(src_type, src_code, &Vm, &M);
+  SplitRegCode(dst_type, dst_code, &Vd, &D);
+
+  if (IsIntegerVFPType(dst_type) || IsIntegerVFPType(src_type)) {
+    // Conversion between IEEE floating point and 32-bit integer.
+    // Instruction details available in ARM DDI 0406B, A8.6.295.
+    // cond(31-28) | 11101(27-23)| D(22) | 11(21-20) | 1(19) | opc2(18-16) |
+    // Vd(15-12) | 101(11-9) | sz(8) | op(7) | 1(6) | M(5) | 0(4) | Vm(3-0)
+    ASSERT(!IsIntegerVFPType(dst_type) || !IsIntegerVFPType(src_type));
+
+    int sz, opc2, op;
+
+    if (IsIntegerVFPType(dst_type)) {
+      opc2 = IsSignedVFPType(dst_type) ? 0x5 : 0x4;
+      sz = IsDoubleVFPType(src_type) ? 0x1 : 0x0;
+      op = mode;
+    } else {
+      ASSERT(IsIntegerVFPType(src_type));
+      opc2 = 0x0;
+      sz = IsDoubleVFPType(dst_type) ? 0x1 : 0x0;
+      op = IsSignedVFPType(src_type) ? 0x1 : 0x0;
+    }
+
+    return (cond | 0xE*B24 | B23 | D*B22 | 0x3*B20 | B19 | opc2*B16 |
+            Vd*B12 | 0x5*B9 | sz*B8 | op*B7 | B6 | M*B5 | Vm);
+  } else {
+    // Conversion between IEEE double and single precision.
+    // Instruction details available in ARM DDI 0406B, A8.6.298.
+    // cond(31-28) | 11101(27-23)| D(22) | 11(21-20) | 0111(19-16) |
+    // Vd(15-12) | 101(11-9) | sz(8) | 1(7) | 1(6) | M(5) | 0(4) | Vm(3-0)
+    int sz = IsDoubleVFPType(src_type) ? 0x1 : 0x0;
+    return (cond | 0xE*B24 | B23 | D*B22 | 0x3*B20 | 0x7*B16 |
+            Vd*B12 | 0x5*B9 | sz*B8 | B7 | B6 | M*B5 | Vm);
+  }
+}
+
+
+void Assembler::vcvt_f64_s32(const DwVfpRegister dst,
+                             const SwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(F64, dst.code(), S32, src.code(), mode, cond));
+}
+
+
+void Assembler::vcvt_f32_s32(const SwVfpRegister dst,
+                             const SwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(F32, dst.code(), S32, src.code(), mode, cond));
+}
+
+
+void Assembler::vcvt_f64_u32(const DwVfpRegister dst,
+                             const SwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(F64, dst.code(), U32, src.code(), mode, cond));
+}
+
+
+void Assembler::vcvt_s32_f64(const SwVfpRegister dst,
+                             const DwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(S32, dst.code(), F64, src.code(), mode, cond));
+}
+
+
+void Assembler::vcvt_u32_f64(const SwVfpRegister dst,
+                             const DwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(U32, dst.code(), F64, src.code(), mode, cond));
+}
+
+
+void Assembler::vcvt_f64_f32(const DwVfpRegister dst,
+                             const SwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(F64, dst.code(), F32, src.code(), mode, cond));
+}
+
+
+void Assembler::vcvt_f32_f64(const SwVfpRegister dst,
+                             const DwVfpRegister src,
+                             VFPConversionMode mode,
+                             const Condition cond) {
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(EncodeVCVT(F32, dst.code(), F64, src.code(), mode, cond));
+}
+
+
+void Assembler::vabs(const DwVfpRegister dst,
+                     const DwVfpRegister src,
+                     const Condition cond) {
+  emit(cond | 0xE*B24 | 0xB*B20 | dst.code()*B12 |
+       0x5*B9 | B8 | 0x3*B6 | src.code());
+}
+
+
+void Assembler::vadd(const DwVfpRegister dst,
+                     const DwVfpRegister src1,
+                     const DwVfpRegister src2,
+                     const Condition cond) {
+  // Dd = vadd(Dn, Dm) double precision floating point addition.
+  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
+  // Instruction details available in ARM DDI 0406A, A8-536.
+  // cond(31-28) | 11100(27-23)| D=?(22) | 11(21-20) | Vn(19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=0 | 0(6) | M=?(5) | 0(4) | Vm(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | 0x3*B20 | src1.code()*B16 |
+       dst.code()*B12 | 0x5*B9 | B8 | src2.code());
+}
+
+
+void Assembler::vsub(const DwVfpRegister dst,
+                     const DwVfpRegister src1,
+                     const DwVfpRegister src2,
+                     const Condition cond) {
+  // Dd = vsub(Dn, Dm) double precision floating point subtraction.
+  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
+  // Instruction details available in ARM DDI 0406A, A8-784.
+  // cond(31-28) | 11100(27-23)| D=?(22) | 11(21-20) | Vn(19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=0 | 1(6) | M=?(5) | 0(4) | Vm(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | 0x3*B20 | src1.code()*B16 |
+       dst.code()*B12 | 0x5*B9 | B8 | B6 | src2.code());
+}
+
+
+void Assembler::vmul(const DwVfpRegister dst,
+                     const DwVfpRegister src1,
+                     const DwVfpRegister src2,
+                     const Condition cond) {
+  // Dd = vmul(Dn, Dm) double precision floating point multiplication.
+  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
+  // Instruction details available in ARM DDI 0406A, A8-784.
+  // cond(31-28) | 11100(27-23)| D=?(22) | 10(21-20) | Vn(19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=0 | 0(6) | M=?(5) | 0(4) | Vm(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | 0x2*B20 | src1.code()*B16 |
+       dst.code()*B12 | 0x5*B9 | B8 | src2.code());
+}
+
+
+void Assembler::vdiv(const DwVfpRegister dst,
+                     const DwVfpRegister src1,
+                     const DwVfpRegister src2,
+                     const Condition cond) {
+  // Dd = vdiv(Dn, Dm) double precision floating point division.
+  // Dd = D:Vd; Dm=M:Vm; Dn=N:Vm.
+  // Instruction details available in ARM DDI 0406A, A8-584.
+  // cond(31-28) | 11101(27-23)| D=?(22) | 00(21-20) | Vn(19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | N(7)=? | 0(6) | M=?(5) | 0(4) | Vm(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | B23 | src1.code()*B16 |
+       dst.code()*B12 | 0x5*B9 | B8 | src2.code());
+}
+
+
+void Assembler::vcmp(const DwVfpRegister src1,
+                     const DwVfpRegister src2,
+                     const Condition cond) {
+  // vcmp(Dd, Dm) double precision floating point comparison.
+  // Instruction details available in ARM DDI 0406A, A8-570.
+  // cond(31-28) | 11101 (27-23)| D=?(22) | 11 (21-20) | 0100 (19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | E(7)=0 | 1(6) | M(5)=? | 0(4) | Vm(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 |B23 | 0x3*B20 | B18 |
+       src1.code()*B12 | 0x5*B9 | B8 | B6 | src2.code());
+}
+
+
+void Assembler::vcmp(const DwVfpRegister src1,
+                     const double src2,
+                     const Condition cond) {
+  // vcmp(Dd, Dm) double precision floating point comparison.
+  // Instruction details available in ARM DDI 0406A, A8-570.
+  // cond(31-28) | 11101 (27-23)| D=?(22) | 11 (21-20) | 0101 (19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | E(7)=0 | 1(6) | M(5)=? | 0(4) | 0000(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  ASSERT(src2 == 0.0);
+  emit(cond | 0xE*B24 |B23 | 0x3*B20 | B18 | B16 |
+       src1.code()*B12 | 0x5*B9 | B8 | B6);
+}
+
+
+void Assembler::vmsr(Register dst, Condition cond) {
+  // Instruction details available in ARM DDI 0406A, A8-652.
+  // cond(31-28) | 1110 (27-24) | 1110(23-20)| 0001 (19-16) |
+  // Rt(15-12) | 1010 (11-8) | 0(7) | 00 (6-5) | 1(4) | 0000(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | 0xE*B20 |  B16 |
+       dst.code()*B12 | 0xA*B8 | B4);
+}
+
+
+void Assembler::vmrs(Register dst, Condition cond) {
+  // Instruction details available in ARM DDI 0406A, A8-652.
+  // cond(31-28) | 1110 (27-24) | 1111(23-20)| 0001 (19-16) |
+  // Rt(15-12) | 1010 (11-8) | 0(7) | 00 (6-5) | 1(4) | 0000(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | 0xF*B20 |  B16 |
+       dst.code()*B12 | 0xA*B8 | B4);
+}
+
+
+void Assembler::vsqrt(const DwVfpRegister dst,
+                      const DwVfpRegister src,
+                      const Condition cond) {
+  // cond(31-28) | 11101 (27-23)| D=?(22) | 11 (21-20) | 0001 (19-16) |
+  // Vd(15-12) | 101(11-9) | sz(8)=1 | 11 (7-6) | M(5)=? | 0(4) | Vm(3-0)
+  ASSERT(CpuFeatures::IsEnabled(VFP3));
+  emit(cond | 0xE*B24 | B23 | 0x3*B20 | B16 |
+       dst.code()*B12 | 0x5*B9 | B8 | 3*B6 | src.code());
+}
+
+
+// Pseudo instructions.
+void Assembler::nop(int type) {
+  // This is mov rx, rx.
+  ASSERT(0 <= type && type <= 14);  // mov pc, pc is not a nop.
+  emit(al | 13*B21 | type*B12 | type);
+}
+
+
+bool Assembler::IsNop(Instr instr, int type) {
+  // Check for mov rx, rx where x = type.
+  ASSERT(0 <= type && type <= 14);  // mov pc, pc is not a nop.
+  return instr == (al | 13*B21 | type*B12 | type);
+}
+
+
+bool Assembler::ImmediateFitsAddrMode1Instruction(int32_t imm32) {
+  uint32_t dummy1;
+  uint32_t dummy2;
+  return fits_shifter(imm32, &dummy1, &dummy2, NULL);
+}
+
+
+void Assembler::BlockConstPoolFor(int instructions) {
+  BlockConstPoolBefore(pc_offset() + instructions * kInstrSize);
+}
+
+
+// Debugging.
+void Assembler::RecordJSReturn() {
+  positions_recorder()->WriteRecordedPositions();
+  CheckBuffer();
+  RecordRelocInfo(RelocInfo::JS_RETURN);
+}
+
+
+void Assembler::RecordDebugBreakSlot() {
+  positions_recorder()->WriteRecordedPositions();
+  CheckBuffer();
+  RecordRelocInfo(RelocInfo::DEBUG_BREAK_SLOT);
+}
+
+
+void Assembler::RecordComment(const char* msg) {
+  if (FLAG_code_comments) {
+    CheckBuffer();
+    RecordRelocInfo(RelocInfo::COMMENT, reinterpret_cast<intptr_t>(msg));
+  }
+}
+
+
+void Assembler::GrowBuffer() {
+  if (!own_buffer_) FATAL("external code buffer is too small");
+
+  // Compute new buffer size.
+  CodeDesc desc;  // the new buffer
+  if (buffer_size_ < 4*KB) {
+    desc.buffer_size = 4*KB;
+  } else if (buffer_size_ < 1*MB) {
+    desc.buffer_size = 2*buffer_size_;
+  } else {
+    desc.buffer_size = buffer_size_ + 1*MB;
+  }
+  CHECK_GT(desc.buffer_size, 0);  // no overflow
+
+  // Setup new buffer.
+  desc.buffer = NewArray<byte>(desc.buffer_size);
+
+  desc.instr_size = pc_offset();
+  desc.reloc_size = (buffer_ + buffer_size_) - reloc_info_writer.pos();
+
+  // Copy the data.
+  int pc_delta = desc.buffer - buffer_;
+  int rc_delta = (desc.buffer + desc.buffer_size) - (buffer_ + buffer_size_);
+  memmove(desc.buffer, buffer_, desc.instr_size);
+  memmove(reloc_info_writer.pos() + rc_delta,
+          reloc_info_writer.pos(), desc.reloc_size);
+
+  // Switch buffers.
+  DeleteArray(buffer_);
+  buffer_ = desc.buffer;
+  buffer_size_ = desc.buffer_size;
+  pc_ += pc_delta;
+  reloc_info_writer.Reposition(reloc_info_writer.pos() + rc_delta,
+                               reloc_info_writer.last_pc() + pc_delta);
+
+  // None of our relocation types are pc relative pointing outside the code
+  // buffer nor pc absolute pointing inside the code buffer, so there is no need
+  // to relocate any emitted relocation entries.
+
+  // Relocate pending relocation entries.
+  for (int i = 0; i < num_prinfo_; i++) {
+    RelocInfo& rinfo = prinfo_[i];
+    ASSERT(rinfo.rmode() != RelocInfo::COMMENT &&
+           rinfo.rmode() != RelocInfo::POSITION);
+    if (rinfo.rmode() != RelocInfo::JS_RETURN) {
+      rinfo.set_pc(rinfo.pc() + pc_delta);
+    }
+  }
+}
+
+
+void Assembler::db(uint8_t data) {
+  // No relocation info should be pending while using db. db is used
+  // to write pure data with no pointers and the constant pool should
+  // be emitted before using db.
+  ASSERT(num_prinfo_ == 0);
+  CheckBuffer();
+  *reinterpret_cast<uint8_t*>(pc_) = data;
+  pc_ += sizeof(uint8_t);
+}
+
+
+void Assembler::dd(uint32_t data) {
+  // No relocation info should be pending while using dd. dd is used
+  // to write pure data with no pointers and the constant pool should
+  // be emitted before using dd.
+  ASSERT(num_prinfo_ == 0);
+  CheckBuffer();
+  *reinterpret_cast<uint32_t*>(pc_) = data;
+  pc_ += sizeof(uint32_t);
+}
+
+
+void Assembler::RecordRelocInfo(RelocInfo::Mode rmode, intptr_t data) {
+  RelocInfo rinfo(pc_, rmode, data);  // we do not try to reuse pool constants
+  if (rmode >= RelocInfo::JS_RETURN && rmode <= RelocInfo::DEBUG_BREAK_SLOT) {
+    // Adjust code for new modes.
+    ASSERT(RelocInfo::IsDebugBreakSlot(rmode)
+           || RelocInfo::IsJSReturn(rmode)
+           || RelocInfo::IsComment(rmode)
+           || RelocInfo::IsPosition(rmode));
+    // These modes do not need an entry in the constant pool.
+  } else {
+    ASSERT(num_prinfo_ < kMaxNumPRInfo);
+    prinfo_[num_prinfo_++] = rinfo;
+    // Make sure the constant pool is not emitted in place of the next
+    // instruction for which we just recorded relocation info.
+    BlockConstPoolBefore(pc_offset() + kInstrSize);
+  }
+  if (rinfo.rmode() != RelocInfo::NONE) {
+    // Don't record external references unless the heap will be serialized.
+    if (rmode == RelocInfo::EXTERNAL_REFERENCE) {
+#ifdef DEBUG
+      if (!Serializer::enabled()) {
+        Serializer::TooLateToEnableNow();
+      }
+#endif
+      if (!Serializer::enabled() && !FLAG_debug_code) {
+        return;
+      }
+    }
+    ASSERT(buffer_space() >= kMaxRelocSize);  // too late to grow buffer here
+    reloc_info_writer.Write(&rinfo);
+  }
+}
+
+
+void Assembler::CheckConstPool(bool force_emit, bool require_jump) {
+  // Calculate the offset of the next check. It will be overwritten
+  // when a const pool is generated or when const pools are being
+  // blocked for a specific range.
+  next_buffer_check_ = pc_offset() + kCheckConstInterval;
+
+  // There is nothing to do if there are no pending relocation info entries.
+  if (num_prinfo_ == 0) return;
+
+  // We emit a constant pool at regular intervals of about kDistBetweenPools
+  // or when requested by parameter force_emit (e.g. after each function).
+  // We prefer not to emit a jump unless the max distance is reached or if we
+  // are running low on slots, which can happen if a lot of constants are being
+  // emitted (e.g. --debug-code and many static references).
+  int dist = pc_offset() - last_const_pool_end_;
+  if (!force_emit && dist < kMaxDistBetweenPools &&
+      (require_jump || dist < kDistBetweenPools) &&
+      // TODO(1236125): Cleanup the "magic" number below. We know that
+      // the code generation will test every kCheckConstIntervalInst.
+      // Thus we are safe as long as we generate less than 7 constant
+      // entries per instruction.
+      (num_prinfo_ < (kMaxNumPRInfo - (7 * kCheckConstIntervalInst)))) {
+    return;
+  }
+
+  // If we did not return by now, we need to emit the constant pool soon.
+
+  // However, some small sequences of instructions must not be broken up by the
+  // insertion of a constant pool; such sequences are protected by setting
+  // either const_pool_blocked_nesting_ or no_const_pool_before_, which are
+  // both checked here. Also, recursive calls to CheckConstPool are blocked by
+  // no_const_pool_before_.
+  if (const_pool_blocked_nesting_ > 0 || pc_offset() < no_const_pool_before_) {
+    // Emission is currently blocked; make sure we try again as soon as
+    // possible.
+    if (const_pool_blocked_nesting_ > 0) {
+      next_buffer_check_ = pc_offset() + kInstrSize;
+    } else {
+      next_buffer_check_ = no_const_pool_before_;
+    }
+
+    // Something is wrong if emission is forced and blocked at the same time.
+    ASSERT(!force_emit);
+    return;
+  }
+
+  int jump_instr = require_jump ? kInstrSize : 0;
+
+  // Check that the code buffer is large enough before emitting the constant
+  // pool and relocation information (include the jump over the pool and the
+  // constant pool marker).
+  int max_needed_space =
+      jump_instr + kInstrSize + num_prinfo_*(kInstrSize + kMaxRelocSize);
+  while (buffer_space() <= (max_needed_space + kGap)) GrowBuffer();
+
+  // Block recursive calls to CheckConstPool.
+  BlockConstPoolBefore(pc_offset() + jump_instr + kInstrSize +
+                       num_prinfo_*kInstrSize);
+  // Don't bother to check for the emit calls below.
+  next_buffer_check_ = no_const_pool_before_;
+
+  // Emit jump over constant pool if necessary.
+  Label after_pool;
+  if (require_jump) b(&after_pool);
+
+  RecordComment("[ Constant Pool");
+
+  // Put down constant pool marker "Undefined instruction" as specified by
+  // A3.1 Instruction set encoding.
+  emit(0x03000000 | num_prinfo_);
+
+  // Emit constant pool entries.
+  for (int i = 0; i < num_prinfo_; i++) {
+    RelocInfo& rinfo = prinfo_[i];
+    ASSERT(rinfo.rmode() != RelocInfo::COMMENT &&
+           rinfo.rmode() != RelocInfo::POSITION &&
+           rinfo.rmode() != RelocInfo::STATEMENT_POSITION);
+    Instr instr = instr_at(rinfo.pc());
+
+    // Instruction to patch must be a ldr/str [pc, #offset].
+    // P and U set, B and W clear, Rn == pc, offset12 still 0.
+    ASSERT((instr & (7*B25 | P | U | B | W | 15*B16 | kOff12Mask)) ==
+           (2*B25 | P | U | pc.code()*B16));
+    int delta = pc_ - rinfo.pc() - 8;
+    ASSERT(delta >= -4);  // instr could be ldr pc, [pc, #-4] followed by targ32
+    if (delta < 0) {
+      instr &= ~U;
+      delta = -delta;
+    }
+    ASSERT(is_uint12(delta));
+    instr_at_put(rinfo.pc(), instr + delta);
+    emit(rinfo.data());
+  }
+  num_prinfo_ = 0;
+  last_const_pool_end_ = pc_offset();
+
+  RecordComment("]");
+
+  if (after_pool.is_linked()) {
+    bind(&after_pool);
+  }
+
+  // Since a constant pool was just emitted, move the check offset forward by
+  // the standard interval.
+  next_buffer_check_ = pc_offset() + kCheckConstInterval;
+}
+
+
+} }  // namespace v8::internal
+
+#endif  // V8_TARGET_ARCH_ARM