cosmos 3.5.1 → 3.5.2

data/lib/cosmos/gui/text/completion.rb

@@ -1,381 +1,381 @@
-# encoding: ascii-8bit
-
-# Copyright 2014 Ball Aerospace & Technologies Corp.
-# All Rights Reserved.
-#
-# This program is free software; you can modify and/or redistribute it
-# under the terms of the GNU General Public License
-# as published by the Free Software Foundation; version 3 with
-# attribution addendums as found in the LICENSE.txt
-
-require 'cosmos'
-require 'cosmos/gui/qt'
-require 'cosmos/script'
-
-module Cosmos
-
-  class Completion < Qt::Completer
-    CMD_KEYWORDS = %w(cmd cmd_no_range_check cmd_no_hazardous_check cmd_no_checks
-      cmd_raw cmd_raw_no_range_check cmd_raw_no_hazardous_check cmd_raw_no_checks)
-    TLM_KEYWORDS = %w(set_tlm set_tlm_raw
-    tlm tlm_raw tlm_formatted tlm_with_units
-    limits_enabled? enable_limits disable_limits
-    check check_raw check_tolerance check_tolerance_raw
-    wait wait_raw wait_tolerance wait_tolerance_raw wait_check wait_check_raw wait_check_tolerance wait_check_tolerance_raw)
-
-    slots 'insertCompletion(const QString&)'
-
-    def initialize(parent)
-      # Must be called first
-      super(parent)
-      # Connect the completion to the passed in widget
-      setWidget(parent)
-      setCaseSensitivity(Qt::CaseInsensitive)
-
-      @text_widget = parent
-      @target = nil
-      @command = nil
-      connect(self, SIGNAL('activated(const QString&)'), self, SLOT('insertCompletion(const QString&)'))
-    end
-
-    def insertCompletion(completion)
-      # Delete the characters already entered (the completionPrefix)
-      # and then insert the full completion text. This allows the user to enter search text
-      # in lower case but it will be completed with upper case text.
-      (0...completionPrefix.length).each do
-        widget.textCursor.deletePreviousChar
-      end
-      widget.textCursor.insertText(completion)
-      widget.setTextCursor(widget.textCursor)
-      # Signal back to the code completion an Enter key so we can continue to process the line
-      event = Qt::KeyEvent.new(Qt::Event::KeyPress, Qt::Key_Enter, Qt::NoModifier)
-      handle_keypress(event)
-      event.dispose
-    end
-
-    # Create the popup based on the list of strings
-    def create_popup(list)
-      cr = widget.cursorRect
-      setModel(Qt::StringListModel.new(list, self))
-      cr.setWidth(popup.sizeHintForColumn(0) + popup.verticalScrollBar.sizeHint.width())
-      complete(cr) # popup it up!
-    end
-
-    def handle_tlm(line)
-      # Bail if the line is already completed i.e. ends with )
-      if line =~ /\"\)/ or line =~ /\)\s*$/ or line =~ /\w\s*\"$/
-        popup.close
-        return
-      end
-
-      # First determine where in the line we are
-      tlm_line = line.split(/\"/)[1]
-      # If there isn't a first quote i.e. tlm("
-      # then we need to handle targets
-      if tlm_line.nil?
-        handle_targets(line, false)
-      else
-        # We need a word after the target to have a packet to work with
-        num_items = tlm_line.split.length
-        if num_items <= 1 and not tlm_line =~ /\w+\s$/
-          handle_targets(line, false)
-        elsif (num_items <= 1 and tlm_line =~ /\w+\s$/) or
-          (num_items == 2 and not tlm_line =~ /\w+\s$/)
-          handle_packets(tlm_line)
-        elsif (num_items <= 2 and tlm_line =~ /\w+\s$/) or
-          (num_items == 3 and not tlm_line =~ /\w+\s+$/)
-          handle_items(tlm_line)
-        else
-          popup.close
-        end
-      end
-    end
-
-    def handle_packets(tlm_line)
-      parts = tlm_line.split
-      if popup.isVisible and not parts[1].nil?
-        setCompletionPrefix(parts[1].upcase)
-      else
-        target_name = parts[0].strip
-
-        begin
-          packets = System.telemetry.packets(target_name)
-          packet_names = []
-          packets.each {|packet_name, packet| packet_names << "#{packet_name} " unless packet.hidden }
-          packet_names.sort!
-
-          # If there is only one packet then just insert the value
-          if packet_names.length == 1
-            widget.textCursor.insertText(packet_names[0])
-            handle_tlm(widget.textCursor.block.text)
-          else
-            if parts[1].nil?
-              setCompletionPrefix("")
-            else
-              setCompletionPrefix(parts[1].upcase)
-            end
-            create_list_popup(packet_names)
-          end
-        rescue
-          # Don't do anything
-        end
-      end
-    end
-
-    def handle_items(tlm_line)
-      @processing = "TLM_ITEM"
-      parts = tlm_line.split
-      if popup.isVisible and not parts[2].nil?
-        setCompletionPrefix(parts[2].upcase)
-      else
-        target_name = parts[0].strip
-        packet_name = parts[1].strip
-
-        begin
-          items = System.telemetry.items(target_name, packet_name)
-          item_names = []
-          items.each {|item| item_names << "#{item.name}\")"}
-          item_names.sort!
-          if parts[2].nil?
-            setCompletionPrefix("")
-          else
-            setCompletionPrefix(parts[2].upcase)
-          end
-          create_list_popup(item_names)
-        rescue
-          # Don't do anything
-        end
-      end
-    end
-
-    # We need to handle ANY substring of the passed in line: cmd("TARGET CMD with PARAM1 X, PARAM2 Y")
-    def handle_cmd(line)
-      # Bail if the line is already completed i.e. ends with ")
-      if line =~ /\"\)/ or line =~ /\w\"$/
-        popup.close
-        return
-      end
-
-      # First determine where in the line we are
-      cmd_line = line.split(/\"/)[1]
-      # If there isn't a first quote i.e. cmd("
-      # then we need to handle targets
-      if cmd_line.nil?
-        handle_targets(line, true)
-      else
-        # We need a word after the target to have a command to work with
-        # We also process commands if the line ends with a character followed by a space i.e. "TARGET "
-        if cmd_line.split.length <= 1 and not cmd_line =~ /\w+\s$/
-          handle_targets(line, true)
-        elsif cmd_line.split.length > 1 or cmd_line =~ /\w+\s$/
-          # If there is a "with" we handle parameters
-          if cmd_line =~ /with\s/
-            # If the line already ends in a comma the parameter is complete so don't process it
-            if cmd_line =~ /,$/
-              popup.close
-            else
-              handle_parameters(cmd_line, line =~ /cmd_raw/)
-            end
-          else
-            handle_commands(cmd_line)
-          end
-        else
-          popup.close
-        end
-      end
-    end
-
-    def handle_targets(line, use_command_definition = false)
-      # Filter the targets if our popup is already up and there is some text to filter by
-      if popup.isVisible and line.split('(').length > 1
-        setCompletionPrefix(line.split('(')[-1].to_s.upcase)
-      else
-        if use_command_definition
-          target_names = System.commands.target_names
-        else
-          target_names = System.telemetry.target_names
-        end
-        target_names_to_delete = []
-        target_names.each do |target_name|
-          found_non_hidden = false
-          begin
-            if use_command_definition
-              packets = System.commands.packets(target_name)
-            else
-              packets = System.telemetry.packets(target_name)
-            end
-            packets.each do |packet_name, packet|
-              found_non_hidden = true unless packet.hidden
-            end
-          rescue
-            # Don't do anything
-          end
-          target_names_to_delete << target_name unless found_non_hidden
-        end
-        target_names_to_delete.each do |target_name|
-          target_names.delete(target_name)
-        end
-
-        len = target_names.length
-        len.times do |i|
-          target_names[i] = "\"#{target_names[i]} "
-        end
-        target_names.sort!
-        if line.split('(').length > 1
-          setCompletionPrefix(line.split('(')[-1].to_s.upcase)
-        else
-          setCompletionPrefix("")
-        end
-        create_list_popup(target_names)
-      end
-    end
-
-    def handle_commands(cmd_line)
-      parts = cmd_line.split
-      if popup.isVisible and not parts[1].nil?
-        # Filter on the parts after the first space
-        setCompletionPrefix(cmd_line[/\s(.*)/,1].to_s.upcase)
-      else
-        target_name = parts[0].strip.upcase
-
-        begin
-          commands = System.commands.packets(target_name)
-          command_strings = []
-          commands.each do |command_name, command|
-            next if command.hidden
-            target = System.targets[target_name]
-            params = System.commands.params(target_name, command_name)
-            no_params = true
-            command_string = nil
-            params.each do |param|
-              if not target.ignored_parameters.include?(param.name)
-                command_string = "#{command.packet_name} with "
-                no_params = false
-                break
-              end
-            end
-            command_string = "#{command.packet_name}\")" if no_params
-            command_strings << command_string
-          end
-          command_strings.sort!
-
-          # Filter on the parts joined back together to include the potential for "with" after the command
-          if parts[1].nil?
-            setCompletionPrefix("")
-          else
-            setCompletionPrefix(cmd_line[/\s(.*)/,1].to_s.upcase)
-          end
-          create_list_popup(command_strings)
-        rescue
-          # Don't do anything
-        end
-      end
-    end
-
-    def handle_parameters(cmd_line, raw = false)
-      if popup.isVisible and not cmd_line.split("with")[1].nil?
-        parameter = cmd_line.split("with")[1].split(',')[-1].lstrip
-        setCompletionPrefix(parameter.upcase)
-      else
-        begin
-          parts = cmd_line.split
-          target_name = parts[0].strip.upcase
-          command_name = parts[1].strip
-
-          target = System.targets[target_name]
-          params = System.commands.params(target_name, command_name)
-          parameters = []
-          params.each do |param|
-            if not target.ignored_parameters.include?(param.name)
-              if param.states.nil? or param.states.empty? or raw
-                param.default = "'X' " if param.default.is_a? String and param.default.strip.length == 0
-                parameters << (param.name + ' ' + param.default.to_s + ', ')
-              else
-                states = param.states.keys
-                states.sort!
-                states.each do |state|
-                  parameters << (param.name + ' ' + state + ', ')
-                end
-              end
-            end
-          end
-          parameters.sort!
-
-          # If there is only one parameter then just insert the value
-          if parameters.length == 1
-            parameters[0] = parameters[0][0..-3] + '")'
-            widget.textCursor.insertText(parameters[0])
-          else
-            unless cmd_line.split("with")[1].nil?
-              param = cmd_line.split("with")[1].split(',')[-1].lstrip
-              setCompletionPrefix(param.upcase)
-            else
-              setCompletionPrefix("")
-            end
-            create_list_popup(parameters)
-          end
-        rescue
-          # Don't do anything
-        end
-      end
-    end
-
-    #Creates a Popup box to help with code completion
-    def create_list_popup(list_items)
-      return if list_items.nil? or list_items.empty?
-      create_popup(list_items)
-    end
-
-    # Called by script_runner on SEL_KEYRELEASE
-    def handle_keypress(event)
-      current_line = widget.textCursor.block.text
-
-      if event.key == Qt::Key_Escape
-        popup.close
-        # Figure out if the last bit of text has a comma in it, indicating the last entry was a parameter
-        # Since the user just hit escape we want to strip the command to make the last parameter the final parameter
-        if current_line.rstrip[-1,1] == ','
-          widget.textCursor.deletePreviousChar
-          widget.textCursor.deletePreviousChar
-          widget.textCursor.insertText('")')
-        end
-        return
-      end
-
-      if event.key == Qt::Key_Backspace
-        popup.close
-        return
-      end
-
-      # Only process if we have an open paren which indicates a function
-      if current_line =~ /\(/
-        split_on_paren = current_line.split('(')[0]
-        if split_on_paren
-          if CMD_KEYWORDS.include? split_on_paren.split[-1]
-            @processing = "CMD"
-            handle_cmd(current_line)
-          elsif TLM_KEYWORDS.include? split_on_paren.split[-1]
-            @processing = "TLM"
-            handle_tlm(current_line)
-          else
-            popup.close
-          end
-        end
-      end
-
-      # Sometimes the popup clears all the values unexpectedly.
-      # This also destroys the model which breaks the second to last line of code.
-      # If this happens just reprocess the line to cause a new popup to display.
-      if model.nil?
-        popup.close
-        handle_cmd(current_line) if @processing == "CMD"
-        handle_tlm(current_line) if @processing == "TLM"
-      end
-
-      # Ensure the top item is always selected as a visual cue to the user
-      popup.setCurrentIndex(model.index(0,0)) if popup.isVisible
-      setCurrentRow(0) if popup.isVisible
-    end
-  end
-
-end # module Cosmos
+# encoding: ascii-8bit
+
+# Copyright 2014 Ball Aerospace & Technologies Corp.
+# All Rights Reserved.
+#
+# This program is free software; you can modify and/or redistribute it
+# under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 3 with
+# attribution addendums as found in the LICENSE.txt
+
+require 'cosmos'
+require 'cosmos/gui/qt'
+require 'cosmos/script'
+
+module Cosmos
+
+  class Completion < Qt::Completer
+    CMD_KEYWORDS = %w(cmd cmd_no_range_check cmd_no_hazardous_check cmd_no_checks
+      cmd_raw cmd_raw_no_range_check cmd_raw_no_hazardous_check cmd_raw_no_checks)
+    TLM_KEYWORDS = %w(set_tlm set_tlm_raw
+    tlm tlm_raw tlm_formatted tlm_with_units
+    limits_enabled? enable_limits disable_limits
+    check check_raw check_tolerance check_tolerance_raw
+    wait wait_raw wait_tolerance wait_tolerance_raw wait_check wait_check_raw wait_check_tolerance wait_check_tolerance_raw)
+
+    slots 'insertCompletion(const QString&)'
+
+    def initialize(parent)
+      # Must be called first
+      super(parent)
+      # Connect the completion to the passed in widget
+      setWidget(parent)
+      setCaseSensitivity(Qt::CaseInsensitive)
+
+      @text_widget = parent
+      @target = nil
+      @command = nil
+      connect(self, SIGNAL('activated(const QString&)'), self, SLOT('insertCompletion(const QString&)'))
+    end
+
+    def insertCompletion(completion)
+      # Delete the characters already entered (the completionPrefix)
+      # and then insert the full completion text. This allows the user to enter search text
+      # in lower case but it will be completed with upper case text.
+      (0...completionPrefix.length).each do
+        widget.textCursor.deletePreviousChar
+      end
+      widget.textCursor.insertText(completion)
+      widget.setTextCursor(widget.textCursor)
+      # Signal back to the code completion an Enter key so we can continue to process the line
+      event = Qt::KeyEvent.new(Qt::Event::KeyPress, Qt::Key_Enter, Qt::NoModifier)
+      handle_keypress(event)
+      event.dispose
+    end
+
+    # Create the popup based on the list of strings
+    def create_popup(list)
+      cr = widget.cursorRect
+      setModel(Qt::StringListModel.new(list, self))
+      cr.setWidth(popup.sizeHintForColumn(0) + popup.verticalScrollBar.sizeHint.width())
+      complete(cr) # popup it up!
+    end
+
+    def handle_tlm(line)
+      # Bail if the line is already completed i.e. ends with )
+      if line =~ /\"\)/ or line =~ /\)\s*$/ or line =~ /\w\s*\"$/
+        popup.close
+        return
+      end
+
+      # First determine where in the line we are
+      tlm_line = line.split(/\"/)[1]
+      # If there isn't a first quote i.e. tlm("
+      # then we need to handle targets
+      if tlm_line.nil?
+        handle_targets(line, false)
+      else
+        # We need a word after the target to have a packet to work with
+        num_items = tlm_line.split.length
+        if num_items <= 1 and not tlm_line =~ /\w+\s$/
+          handle_targets(line, false)
+        elsif (num_items <= 1 and tlm_line =~ /\w+\s$/) or
+          (num_items == 2 and not tlm_line =~ /\w+\s$/)
+          handle_packets(tlm_line)
+        elsif (num_items <= 2 and tlm_line =~ /\w+\s$/) or
+          (num_items == 3 and not tlm_line =~ /\w+\s+$/)
+          handle_items(tlm_line)
+        else
+          popup.close
+        end
+      end
+    end
+
+    def handle_packets(tlm_line)
+      parts = tlm_line.split
+      if popup.isVisible and not parts[1].nil?
+        setCompletionPrefix(parts[1].upcase)
+      else
+        target_name = parts[0].strip
+
+        begin
+          packets = System.telemetry.packets(target_name)
+          packet_names = []
+          packets.each {|packet_name, packet| packet_names << "#{packet_name} " unless packet.hidden }
+          packet_names.sort!
+
+          # If there is only one packet then just insert the value
+          if packet_names.length == 1
+            widget.textCursor.insertText(packet_names[0])
+            handle_tlm(widget.textCursor.block.text)
+          else
+            if parts[1].nil?
+              setCompletionPrefix("")
+            else
+              setCompletionPrefix(parts[1].upcase)
+            end
+            create_list_popup(packet_names)
+          end
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    def handle_items(tlm_line)
+      @processing = "TLM_ITEM"
+      parts = tlm_line.split
+      if popup.isVisible and not parts[2].nil?
+        setCompletionPrefix(parts[2].upcase)
+      else
+        target_name = parts[0].strip
+        packet_name = parts[1].strip
+
+        begin
+          items = System.telemetry.items(target_name, packet_name)
+          item_names = []
+          items.each {|item| item_names << "#{item.name}\")"}
+          item_names.sort!
+          if parts[2].nil?
+            setCompletionPrefix("")
+          else
+            setCompletionPrefix(parts[2].upcase)
+          end
+          create_list_popup(item_names)
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    # We need to handle ANY substring of the passed in line: cmd("TARGET CMD with PARAM1 X, PARAM2 Y")
+    def handle_cmd(line)
+      # Bail if the line is already completed i.e. ends with ")
+      if line =~ /\"\)/ or line =~ /\w\"$/
+        popup.close
+        return
+      end
+
+      # First determine where in the line we are
+      cmd_line = line.split(/\"/)[1]
+      # If there isn't a first quote i.e. cmd("
+      # then we need to handle targets
+      if cmd_line.nil?
+        handle_targets(line, true)
+      else
+        # We need a word after the target to have a command to work with
+        # We also process commands if the line ends with a character followed by a space i.e. "TARGET "
+        if cmd_line.split.length <= 1 and not cmd_line =~ /\w+\s$/
+          handle_targets(line, true)
+        elsif cmd_line.split.length > 1 or cmd_line =~ /\w+\s$/
+          # If there is a "with" we handle parameters
+          if cmd_line =~ /with\s/
+            # If the line already ends in a comma the parameter is complete so don't process it
+            if cmd_line =~ /,$/
+              popup.close
+            else
+              handle_parameters(cmd_line, line =~ /cmd_raw/)
+            end
+          else
+            handle_commands(cmd_line)
+          end
+        else
+          popup.close
+        end
+      end
+    end
+
+    def handle_targets(line, use_command_definition = false)
+      # Filter the targets if our popup is already up and there is some text to filter by
+      if popup.isVisible and line.split('(').length > 1
+        setCompletionPrefix(line.split('(')[-1].to_s.upcase)
+      else
+        if use_command_definition
+          target_names = System.commands.target_names
+        else
+          target_names = System.telemetry.target_names
+        end
+        target_names_to_delete = []
+        target_names.each do |target_name|
+          found_non_hidden = false
+          begin
+            if use_command_definition
+              packets = System.commands.packets(target_name)
+            else
+              packets = System.telemetry.packets(target_name)
+            end
+            packets.each do |packet_name, packet|
+              found_non_hidden = true unless packet.hidden
+            end
+          rescue
+            # Don't do anything
+          end
+          target_names_to_delete << target_name unless found_non_hidden
+        end
+        target_names_to_delete.each do |target_name|
+          target_names.delete(target_name)
+        end
+
+        len = target_names.length
+        len.times do |i|
+          target_names[i] = "\"#{target_names[i]} "
+        end
+        target_names.sort!
+        if line.split('(').length > 1
+          setCompletionPrefix(line.split('(')[-1].to_s.upcase)
+        else
+          setCompletionPrefix("")
+        end
+        create_list_popup(target_names)
+      end
+    end
+
+    def handle_commands(cmd_line)
+      parts = cmd_line.split
+      if popup.isVisible and not parts[1].nil?
+        # Filter on the parts after the first space
+        setCompletionPrefix(cmd_line[/\s(.*)/,1].to_s.upcase)
+      else
+        target_name = parts[0].strip.upcase
+
+        begin
+          commands = System.commands.packets(target_name)
+          command_strings = []
+          commands.each do |command_name, command|
+            next if command.hidden
+            target = System.targets[target_name]
+            params = System.commands.params(target_name, command_name)
+            no_params = true
+            command_string = nil
+            params.each do |param|
+              if not target.ignored_parameters.include?(param.name)
+                command_string = "#{command.packet_name} with "
+                no_params = false
+                break
+              end
+            end
+            command_string = "#{command.packet_name}\")" if no_params
+            command_strings << command_string
+          end
+          command_strings.sort!
+
+          # Filter on the parts joined back together to include the potential for "with" after the command
+          if parts[1].nil?
+            setCompletionPrefix("")
+          else
+            setCompletionPrefix(cmd_line[/\s(.*)/,1].to_s.upcase)
+          end
+          create_list_popup(command_strings)
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    def handle_parameters(cmd_line, raw = false)
+      if popup.isVisible and not cmd_line.split("with")[1].nil?
+        parameter = cmd_line.split("with")[1].split(',')[-1].lstrip
+        setCompletionPrefix(parameter.upcase)
+      else
+        begin
+          parts = cmd_line.split
+          target_name = parts[0].strip.upcase
+          command_name = parts[1].strip
+
+          target = System.targets[target_name]
+          params = System.commands.params(target_name, command_name)
+          parameters = []
+          params.each do |param|
+            if not target.ignored_parameters.include?(param.name)
+              if param.states.nil? or param.states.empty? or raw
+                param.default = "'X' " if param.default.is_a? String and param.default.strip.length == 0
+                parameters << (param.name + ' ' + param.default.to_s + ', ')
+              else
+                states = param.states.keys
+                states.sort!
+                states.each do |state|
+                  parameters << (param.name + ' ' + state + ', ')
+                end
+              end
+            end
+          end
+          parameters.sort!
+
+          # If there is only one parameter then just insert the value
+          if parameters.length == 1
+            parameters[0] = parameters[0][0..-3] + '")'
+            widget.textCursor.insertText(parameters[0])
+          else
+            unless cmd_line.split("with")[1].nil?
+              param = cmd_line.split("with")[1].split(',')[-1].lstrip
+              setCompletionPrefix(param.upcase)
+            else
+              setCompletionPrefix("")
+            end
+            create_list_popup(parameters)
+          end
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    #Creates a Popup box to help with code completion
+    def create_list_popup(list_items)
+      return if list_items.nil? or list_items.empty?
+      create_popup(list_items)
+    end
+
+    # Called by script_runner on SEL_KEYRELEASE
+    def handle_keypress(event)
+      current_line = widget.textCursor.block.text
+
+      if event.key == Qt::Key_Escape
+        popup.close
+        # Figure out if the last bit of text has a comma in it, indicating the last entry was a parameter
+        # Since the user just hit escape we want to strip the command to make the last parameter the final parameter
+        if current_line.rstrip[-1,1] == ','
+          widget.textCursor.deletePreviousChar
+          widget.textCursor.deletePreviousChar
+          widget.textCursor.insertText('")')
+        end
+        return
+      end
+
+      if event.key == Qt::Key_Backspace
+        popup.close
+        return
+      end
+
+      # Only process if we have an open paren which indicates a function
+      if current_line =~ /\(/
+        split_on_paren = current_line.split('(')[0]
+        if split_on_paren
+          if CMD_KEYWORDS.include? split_on_paren.split[-1]
+            @processing = "CMD"
+            handle_cmd(current_line)
+          elsif TLM_KEYWORDS.include? split_on_paren.split[-1]
+            @processing = "TLM"
+            handle_tlm(current_line)
+          else
+            popup.close
+          end
+        end
+      end
+
+      # Sometimes the popup clears all the values unexpectedly.
+      # This also destroys the model which breaks the second to last line of code.
+      # If this happens just reprocess the line to cause a new popup to display.
+      if model.nil?
+        popup.close
+        handle_cmd(current_line) if @processing == "CMD"
+        handle_tlm(current_line) if @processing == "TLM"
+      end
+
+      # Ensure the top item is always selected as a visual cue to the user
+      popup.setCurrentIndex(model.index(0,0)) if popup.isVisible
+      setCurrentRow(0) if popup.isVisible
+    end
+  end
+
+end # module Cosmos