ysk-server-shared 1.0.0

package/locales/en/vnc.json

@@ -0,0 +1,246 @@
+{
+  "pageDesc": "VNC server & client",
+  "result": "VNC operation result",
+  "installed": "Installed",
+  "notInstalled": "Not installed",
+  "stackBins": "{{bins}}",
+  "stackMissing": "Missing tools",
+  "executeOn": "YSK_EXECUTE on",
+  "executeOff": "YSK_EXECUTE off",
+  "statAccounts": "Accounts",
+  "statRunning": "Running",
+  "statClients": "Client profiles",
+  "statEndpoint": "Host",
+  "goAccounts": "Accounts",
+  "goClient": "Client",
+  "goInstall": "Install",
+  "accountsEmptyTitle": "No accounts",
+  "accountsEmptyDesc": "Create an account to start",
+  "clientPathHint": "Both paths open VNC in the browser. They differ by target semantics and copy (both still TCP-proxy via the panel).",
+  "clientPathCompare": "“User-reachable”: public hostnames (e.g. hermes.example.com:5901). “Server proxy”: LAN / DC targets only this host can reach. TCP is probed from this server before connect.",
+  "clientEmptyTitle": "No clients",
+  "clientEmptyDesc": "Add remote host:port",
+  "openInBrowser": "Open in browser",
+  "pathUserReachable": "User-reachable endpoint",
+  "pathServerProxy": "Via server proxy",
+  "pathUserReachableShort": "User-reachable",
+  "pathServerProxyShort": "Server proxy",
+  "pathUserReachableHint": "For public hostnames or targets as configured (e.g. example.com:5901). Browser goes through the panel; this host must open TCP to that address.",
+  "pathServerProxyHint": "For LAN or targets only the control-plane server can reach. Traffic is proxied via this server’s network. Optional connect host overrides the TCP address (e.g. display name vs 10.x).",
+  "connectHost": "Connect host (optional, server proxy)",
+  "connectHostHint": "TCP address the control plane opens (LAN IP). Leave empty to use Remote host above.",
+  "pathBrowser": "User-reachable endpoint",
+  "pathHostViewer": "Via server proxy",
+  "hostViewer": "Via server proxy",
+  "needViewerOptional": "TigerVNC Viewer (optional, not for browser path)",
+  "viewerStackOptional": "In-browser VNC does not need desktop vncviewer. The Viewer package below is optional system maintenance only.",
+  "viewer": {
+    "minting": "Preparing session…",
+    "connecting": "Connecting…",
+    "connected": "Connected",
+    "disconnected": "Disconnected",
+    "error": "Connection failed",
+    "idle": "Idle",
+    "closed": "Closed",
+    "minting_state": "Preparing",
+    "reconnect": "Reconnect",
+    "disconnect": "Disconnect",
+    "fullscreen": "Fullscreen",
+    "fit": "Fit window",
+    "oneToOne": "1:1",
+    "cad": "Ctrl+Alt+Del",
+    "password": "VNC password",
+    "passwordPrompt": "Password required",
+    "sendPassword": "Send password",
+    "securityFailure": "Authentication failed",
+    "canvasLabel": "VNC desktop: {{name}}",
+    "clipboardPaste": "Paste → remote",
+    "clipboardPanel": "Clipboard",
+    "clipboardHint": "Sync text between this browser and the remote desktop.",
+    "clipboardLocal": "Send to remote",
+    "clipboardLocalPh": "Paste or type text to send into the VNC session",
+    "clipboardRemote": "From remote",
+    "clipboardRemotePh": "Text copied on the remote desktop appears here",
+    "clipboardSend": "Send to remote",
+    "clipboardCopy": "Copy locally",
+    "clipboardToRemote": "Clipboard sent to remote",
+    "clipboardToRemoteHint": "Paste browser clipboard into the remote session",
+    "clipboardFromRemote": "Remote clipboard copied to this browser",
+    "clipboardFromRemoteManual": "Remote clipboard updated — open Clipboard panel to copy",
+    "clipboardEmpty": "Nothing to paste — copy text first or type below",
+    "clipboardReadDenied": "Browser blocked clipboard read — paste into the panel and Send",
+    "clipboardNoRemote": "No text received from remote yet",
+    "clipboardCopiedLocal": "Copied to this browser",
+    "quality": "Quality",
+    "qualityHint": "Image quality vs bandwidth (JPEG / compression)",
+    "qualityLow": "Low (save data)",
+    "qualityBalanced": "Balanced",
+    "qualityHigh": "High",
+    "qualityMax": "Max quality",
+    "passwordPromptHint": "This desktop requires a VNC password — enter it below.",
+    "errNeedExecute": "Cannot start the desktop: server needs root and YSK_EXECUTE enabled.",
+    "errTicket": "Session ticket expired or invalid — press Reconnect.",
+    "errBusy": "Too many VNC sessions on this panel — close another and retry.",
+    "errRefused": "Nothing is listening on {{host}}:{{port}} (connection refused). Is VNC running and reachable from this server?",
+    "errRefusedGeneric": "Connection refused — check that VNC is running and the port is correct.",
+    "errTimeout": "Timed out connecting to {{host}}:{{port}}. Check firewall / network path from this server.",
+    "errTimeoutGeneric": "Connection timed out — check network and firewall.",
+    "errDns": "Cannot resolve host name «{{host}}».",
+    "errDnsGeneric": "Host name could not be resolved.",
+    "errNet": "Network unreachable for {{host}}:{{port}}.",
+    "reconnecting": "Connection dropped — reconnecting ({{n}}/{{max}})…",
+    "idleHint": "Session has been idle for a while. The remote desktop may lock; move the mouse or reconnect if needed.",
+    "idleDismiss": "Still here",
+    "sessions": "Open VNC sessions",
+    "sessionCount": "{{n}} / {{max}} sessions",
+    "sessionLimit": "At most {{max}} VNC sessions at once — close one first.",
+    "closeSession": "Close session {{name}}",
+    "shareLink": "Share link",
+    "shareCopied": "View-only share link copied (valid ~1 hour)",
+    "shareFailed": "Could not create share link",
+    "shareTitle": "Shared VNC view",
+    "shareGuest": "Shared desktop",
+    "shareMissing": "Missing share token",
+    "shareExpired": "This share link is invalid or has expired",
+    "viewOnlyBadge": "View only",
+    "screenshot": "Screenshot",
+    "screenshotSaved": "Screenshot downloaded",
+    "screenshotFailed": "Could not capture screenshot",
+    "screenshotNoCanvas": "Display not ready for screenshot",
+    "record": "Record",
+    "recordStop": "Stop rec",
+    "recordHint": "Record desktop to WebM (max 60s)",
+    "recordStarted": "Recording… click Stop rec or wait 60s",
+    "recordSaved": "Recording downloaded",
+    "recordFailed": "Could not record",
+    "recordUnsupported": "This browser cannot record the canvas",
+    "connectingHint": "Opening a secure tunnel to the desktop…",
+    "reconnectHint": "Press Reconnect to try again, or check the remote host and port."
+  },
+  "installHint": "TigerVNC → noVNC; XFCE optional",
+  "needTigerVnc": "TigerVNC required",
+  "needNovnc": "noVNC required",
+  "needXfce": "XFCE (optional)",
+  "needViewer": "Viewer (optional)",
+  "needViewerOrNovnc": "Viewer or noVNC",
+  "settingsHint": "Defaults for new accounts",
+  "defaultDesktop": "Default desktop",
+  "defaultGeometry": "Default resolution",
+  "defaultDepth": "Colour depth",
+  "defaultRfbBind": "RFB listen",
+  "defaultAutostart": "Autostart sessions",
+  "autostartLabel": "Start on boot",
+  "settingsSaved": "VNC defaults saved",
+  "tab": {
+    "overview": "Overview",
+    "accounts": "Accounts",
+    "client": "Client",
+    "install": "Install",
+    "settings": "Settings",
+    "about": "About"
+  },
+  "desktop": {
+    "xfce": "XFCE (full desktop)",
+    "terminal": "Terminal"
+  },
+  "bind": {
+    "localhost": "Localhost only (noVNC / tunnel)",
+    "all": "All interfaces (direct RFB — open firewall)",
+    "localhostShort": "localhost",
+    "allShort": "0.0.0.0"
+  },
+  "accountListTitle": "VNC accounts ({{count}})",
+  "accountListDesc": "One Linux user per account",
+  "createAccount": "+ Create account",
+  "createAccountTitle": "Create VNC account",
+  "createAccountDesc": "Dedicated yskvnc_* user",
+  "createAccountBtn": "Create account",
+  "editAccountTitle": "Edit VNC account",
+  "editAccountDesc": "Linux user {{user}} · display :{{display}}",
+  "setPassword": "Password",
+  "setPasswordTitle": "Set VNC password",
+  "setPasswordDesc": "Update VNC login password for {{address}}",
+  "newPassword": "New password",
+  "confirmPassword": "Confirm password",
+  "passwordHint": "Min 6 chars",
+  "passwordMismatch": "Passwords do not match",
+  "passwordTooShort": "Password must be at least 6 characters",
+  "needName": "Enter a display name",
+  "start": "Start",
+  "stop": "Stop",
+  "startAfterCreate": "Start after create",
+  "colName": "Name",
+  "colLinuxUser": "Linux user",
+  "colDisplay": "Display / port",
+  "colStatus": "Status",
+  "colDesktop": "Desktop",
+  "colBind": "RFB bind",
+  "accountStatus": {
+    "running": "Running",
+    "stopped": "Stopped",
+    "failed": "Failed",
+    "written": "Written",
+    "unknown": "Unknown"
+  },
+  "clientStatus": {
+    "up": "Connected",
+    "down": "Disconnected",
+    "unknown": "Unknown",
+    "error": "Error",
+    "viewing": "Viewing in browser"
+  },
+  "accountPager": "Account pages",
+  "prevPage": "Previous",
+  "nextPage": "Next",
+  "pageOf": "Page {{page}} / {{total}} · {{count}}",
+  "deleteAccountTitle": "Delete VNC account?",
+  "deleteAccountDesc": "Remove control-plane account {{name}} ({{user}}). Session will be stopped first.",
+  "deleteAccountC1": "VNC session for this display",
+  "deleteAccountC2": "Panel metadata under dataDir/vnc",
+  "deleteAccountC3User": "Linux user home will be removed (userdel -r)",
+  "deleteAccountC3Keep": "Linux user will be kept on the system",
+  "removeLinuxUser": "Also remove Linux user and home directory",
+  "connection": "Connect",
+  "connectionTitle": "Connection materials",
+  "connectionDesc": "How clients reach {{name}}",
+  "connectionPathsHint": "Prefer open in browser; advanced options for legacy noVNC / direct RFB",
+  "connectionBrowserHint": "Recommended: open the desktop inside this panel (no SSH tunnel, works from any browser that can reach the panel).",
+  "connectionBrowserDesc": "Starts the VNC session if needed and opens the in-panel viewer with keyboard, mouse, and clipboard.",
+  "connectionAdvanced": "Advanced: legacy noVNC URL & direct RFB",
+  "pathViaServer": "Via server (noVNC)",
+  "pathViaServerLegacy": "Legacy noVNC on server (127.0.0.1)",
+  "pathViaServerLegacyHint": "Only works on the server host or via SSH tunnel — prefer “Open in browser”.",
+  "pathDirect": "Direct RFB",
+  "recommended": "Recommended",
+  "startNovnc": "Start noVNC",
+  "stopNovnc": "Stop noVNC",
+  "copyNovncUrl": "Copy noVNC URL",
+  "copyAddress": "Copy host:port",
+  "openFirewall": "Open UFW port",
+  "directAddress": "Address",
+  "ticketPath": "View ticket API",
+  "directLocalhostWarn": "RFB is localhost-only",
+  "copied": "Copied to clipboard",
+  "clientListTitle": "Client profiles ({{count}})",
+  "clientListDesc": "Outbound VNC",
+  "addClient": "+ Add remote",
+  "addClientTitle": "Add remote VNC",
+  "addClientDesc": "Remote host:port",
+  "clientTarget": "Target",
+  "clientPath": "Connect path",
+  "clientHost": "Remote host",
+  "pathViaServerShort": "Browser",
+  "pathDirectShort": "Host viewer",
+  "disconnect": "Disconnect",
+  "connect": "Connect",
+  "clientNeedFields": "Name and host are required",
+  "clientCreated": "Client profile created",
+  "clientPasswordOptional": "VNC password (optional)",
+  "clientPasswordHint": "Used when you open the browser viewer. Leave empty to type it each time.",
+  "clientRememberPassword": "Store password on this server for next open",
+  "clientRememberPasswordWarn": "Password is stored in panel dataDir (readable by root). Prefer typing each time on shared hosts.",
+  "stackMissingShort": "Not installed",
+  "editClientTitle": "Edit remote client",
+  "editClientDesc": "Update path, hosts, and optional stored password.",
+  "clientUpdated": "Client profile updated"
+}

package/locales/en/vpn.json

@@ -0,0 +1,131 @@
+{
+  "pageDesc": "VPN server & client",
+  "eyebrow": "VPN",
+  "tab": {
+    "wireguard": "WireGuard",
+    "openvpn": "OpenVPN",
+    "outline": "Shadowsocks",
+    "client": "Local client",
+    "software": "Software",
+    "monitor": "Monitor",
+    "about": "About",
+    "server": "Server",
+    "install": "Install",
+    "overview": "Overview"
+  },
+  "softwareIntro": "Install or update VPN engines here. Server tabs stay focused on config.",
+  "monitor": {
+    "needLive": "Live metrics need root + YSK_EXECUTE on the server.",
+    "autoRefresh": "Auto 3s",
+    "filterEngine": "Engine filter",
+    "filterPresence": "Presence filter",
+    "engineAll": "All engines",
+    "presenceAll": "All",
+    "presenceOnline": "Online",
+    "presenceOffline": "Offline",
+    "onlineOf": "Online {{online}} / {{total}}",
+    "peersTitle": "Peers ({{count}})",
+    "localTitle": "Local outbound",
+    "colEndpoint": "Remote",
+    "colLastSeen": "Last seen",
+    "colRx": "↓ Total",
+    "colTx": "↑ Total",
+    "colRxRate": "↓ Rate",
+    "colTxRate": "↑ Rate",
+    "sampledAt": "Sampled {{when}}",
+    "emptyPeers": "No peers to show",
+    "emptyPeersHint": "Add peers on engine tabs, or clear filters",
+    "presence": {
+      "online": "Online",
+      "idle": "Idle",
+      "offline": "Offline",
+      "never": "Never",
+      "unknown": "Unknown"
+    }
+  },
+  "installed": "Installed",
+  "notInstalled": "Not installed",
+  "serverUp": "Running",
+  "serverDown": "Stopped",
+  "engineSummary": "port {{port}} · {{peers}} peers",
+  "engineSummaryClient": "{{count}} profiles · {{up}} up",
+  "needWireGuard": "WireGuard required",
+  "needOpenVpn": "OpenVPN required",
+  "needSs": "ss-server required",
+  "ssHonestUi": "ss:// access keys (not full Outline Manager)",
+  "listenPort": "Listen port",
+  "listenPortUdp": "Listen port (UDP)",
+  "listenPortTcp": "Listen port (TCP)",
+  "endpoint": "Public endpoint",
+  "endpointHint": "Public host:port clients use to connect",
+  "ensureServer": "Apply server",
+  "openFirewall": "Open {{port}}/{{proto}}",
+  "presets": "Port presets",
+  "proto": "Protocol",
+  "protoUdp": "UDP",
+  "protoTcp": "TCP",
+  "statusLine": "{{state}} · {{port}}/{{proto}} · {{peers}} peers",
+  "peersTitle": "Peers / keys",
+  "peersTitleWg": "Peers",
+  "peersTitleOvpn": "Client configs",
+  "peersTitleSs": "Access keys",
+  "peerName": "Name",
+  "peerNamePlaceholder": "phone",
+  "addPeer": "+ Add",
+  "addPeerWg": "+ Add peer",
+  "addPeerOvpn": "+ Add client",
+  "addPeerSs": "+ Add key",
+  "noPeers": "None yet",
+  "noPeersHint": "Add one to download config",
+  "colName": "Name",
+  "colAddress": "Address",
+  "colCreated": "Created",
+  "colActions": "Actions",
+  "colEngine": "Engine",
+  "colStatus": "Status",
+  "colIface": "Interface",
+  "downloadKey": "Download",
+  "showQr": "QR",
+  "copyConf": "Copy",
+  "copied": "Copied",
+  "downloaded": "Config downloaded",
+  "qrReady": "QR ready",
+  "qrTitle": "QR — {{name}}",
+  "qrHintWg": "Scan in WireGuard app",
+  "qrHintSs": "Scan ss:// in a Shadowsocks client",
+  "showConf": "Config text",
+  "close": "Close",
+  "clientIntro": "Import a conf file to connect this host out",
+  "profileName": "Profile name",
+  "pasteConf": "Paste conf",
+  "importProfile": "Import",
+  "importOpen": "+ Import conf",
+  "noProfiles": "No local profiles",
+  "noProfilesHint": "Import WireGuard or OpenVPN client conf",
+  "connect": "Connect",
+  "disconnect": "Disconnect",
+  "clientStatus": {
+    "up": "Connected",
+    "down": "Disconnected",
+    "unknown": "Unknown",
+    "error": "Error"
+  },
+  "result": "Result",
+  "clientEngine": "Type",
+  "engineAuto": "Auto-detect",
+  "refresh": "Refresh",
+  "dnsOptional": "DNS (optional)",
+  "serverSettings": "Server settings",
+  "access": {
+    "label": "Client traffic",
+    "full": "Full internet",
+    "lan": "LAN only",
+    "custom": "Custom routes",
+    "fullHint": "All client traffic goes via this server (enables NAT). Reconnect clients after apply.",
+    "lanHint": "Only VPN + selected private nets; client keeps its own internet. Reconnect after apply.",
+    "customHint": "Only the CIDRs you list enter the tunnel. Reconnect after apply.",
+    "lanCidrs": "LAN networks",
+    "customCidr": "CIDR",
+    "addCidr": "Add"
+  }
+}

package/locales/es/agents.json

@@ -0,0 +1,130 @@
+{
+  "title": "Tiempos de ejecución del agente de IA",
+  "body": "Instalación y supervisión de OpenClaw / Hermes / IonClaw; todas las llamadas a herramientas pasan por la lista permitida y la aprobación.",
+  "status": {
+    "running": "Correr",
+    "connected": "En línea",
+    "registered": "Sólo registrado",
+    "stale": "Duro",
+    "disconnected": "Desconectado",
+    "not_installed": "No instalado",
+    "failed": "Fallido",
+    "error": "Error",
+    "unknown": "No investigado",
+    "fallback": "Desconocido"
+  },
+  "liveN": "{{count}} en línea",
+  "registeredOnly": "Sólo registrado",
+  "awaitProbe": "En espera de investigación",
+  "runtimes": "Tiempos de ejecución",
+  "running": "Correr",
+  "liveAgents": "Agentes en línea",
+  "fleet": "Flota",
+  "aiTasks": "Tareas de IA",
+  "expBanner": "Experimental.",
+  "expBody": "Registro ≠ en línea. Las operaciones reales utilizan CLI:",
+  "expDocs": "Documentos: repositorio",
+  "expPayload": "; recomendación de carga útil del comando",
+  "fleetCan": "Qué puede hacer la flota",
+  "fleetCanDesc": "No es una lista vacía: capacidades reales del plano de control para nodos de borde",
+  "capRegister": "Registro",
+  "capRegisterD": "Escribe la lista del plano de control (estado \"solo registrado\"): es posible que el proceso no se esté ejecutando",
+  "capCommand": "Dominio",
+  "capCommandD": "Ajustes preestablecidos de CLI (preparación/host/proyectos…) o personalizados; Edge tira, ejecuta ysk-server y confirma",
+  "capHistory": "Historial de comandos",
+  "capHistoryD": "en cola/hecho/error, código de salida, bonito resultado JSON",
+  "capDelete": "Borrar",
+  "capDeleteD": "Elimina la sesión y los mensajes relacionados.",
+  "capStatus": "Estado",
+  "capStatusD": "Solo registrado → en línea (latido) → obsoleto (>60 sin latido)",
+  "fleetTitle": "Flota ({{count}})",
+  "fleetDesc": "Registro del plano de control · registrado ≠ nodo en línea",
+  "registerPlus": "+ Registrar agente",
+  "colId": "ID",
+  "colStatus": "Estado",
+  "colGroup": "Grupo",
+  "colLastSeen": "visto por última vez",
+  "command": "Dominio",
+  "history": "Historia",
+  "emptyAgents": "No hay agentes registrados",
+  "emptyAgentsDesc": "Regístrese desde la lista o espere a que los procesos perimetrales se registren automáticamente",
+  "historyTitle": "Historial de comandos · {{id}}",
+  "historyDesc": "en cola hasta que el nodo se retira;",
+  "refreshHistory": "Actualizar historial",
+  "colTime": "Tiempo",
+  "finishedAt": "Terminado {{at}}",
+  "colCommand": "Dominio",
+  "colResult": "Resumen de resultados",
+  "hasResult": "tiene resultado",
+  "emptyCmds": "Aún no hay comandos",
+  "emptyCmdsDesc": "Cola con “Comando”; permanece en cola hasta que el agente perimetral esté en línea",
+  "edgeOnlineTitle": "Cómo se conectan los agentes de borde",
+  "edgeOnlineDesc": "Después del registro del panel, el nodo debe ejecutar el bucle de salida para ejecutar comandos de latido/extracción.",
+  "controlPlaneApi": "API del plano de control:",
+  "controlPlaneHint": "(debe ser accesible; utilice la dirección del panel real en producción)",
+  "queueNote": "Sin un proceso perimetral, el “Comando” todavía funciona: hace cola hasta que el agente se conecta.",
+  "runtimeTitle": "Tiempos de ejecución de IA",
+  "runtimeDesc": "Rutas y unidades de sonda;",
+  "emptyRuntime": "Aún no hay resultados de la sonda",
+  "emptyRuntimeDesc": "Actualice para cargar tiempos de ejecución o analice individualmente",
+  "pathExists": "existe",
+  "pathMissing": "No instalado",
+  "unitUnknown": "{{unit}} · desconocido",
+  "path": "Camino",
+  "probe": "Sonda",
+  "install": "Instalar",
+  "recentOps": "Operaciones recientes",
+  "registerTitle": "Agente de registro",
+  "registerDesc": "Escribe únicamente la lista del plano de control; no significa que el nodo esté en línea",
+  "register": "Registro",
+  "agentId": "ID del agente",
+  "agentIdHint": "ID único, p.e. Edge-1 o puerta de enlace de oficina",
+  "group": "Grupo",
+  "groupHint": "Para filtros de zonificación/lista",
+  "registerNote": "El estado muestra \"solo registrado\" hasta que el nodo ejecuta el agente saliente y los latidos.",
+  "cmdTitle": "Comando · {{id}}",
+  "cmdTitlePlain": "Dominio",
+  "cmdDesc": "En cola; El agente perimetral extrae, ejecuta y confirma (permanece en cola mientras está desconectado)",
+  "enqueue": "poner en cola",
+  "cmdPreset": "Comando (CLI primero)",
+  "cmdTypeAria": "Tipo de comando",
+  "customCli": "CLI personalizada",
+  "cliArgs": "Argumentos CLI",
+  "cliArgsHint": "No incluya el servidor ysk; p.ej. diario de registros --unidad nginx.service",
+  "cmdNote": "La ejecución del agente Edge ysk-server ejecuta CLI JSON localmente (agrega --json). Los cambios de host aún necesitan YSK_EXECUTE=1 en el borde. Ver código de salida y JSON en Historial.",
+  "resultTitle": "Resultado del comando · salir {{code}}",
+  "resultTitlePlain": "Resultado del comando",
+  "codeComment": "# Concepto: registro → bucle de latidos → extracción de comandos → reconocimiento\n# Biblioteca: ysk-server-core runOutboundAgent / agentCycle",
+  "resultOuter": "Exterior: reconocimiento de borde (código de salida/stderr). Resultado interno:",
+  "deleteTitle": "¿Eliminar {{id}}?",
+  "deleteTitlePlain": "¿Eliminar agente?",
+  "deleteDesc": "También se eliminará el historial de comandos relacionado.",
+  "fact": {
+    "kind": "Tipo",
+    "name": "Nombre",
+    "status": "Estado",
+    "unitActive": "Servicio",
+    "unitName": "Unidad",
+    "pathExists": "El camino existe",
+    "installPath": "Ruta de instalación"
+  },
+  "installBlocked": "No se puede completar la instalación en el panel de administración",
+  "registeredMsg": "Registrado {{id}} (solo plano de control; el nodo debe ejecutar el agente de salida y el latido para conectarse)",
+  "registerFailed": "Registro fallido",
+  "removedFleet": "Se eliminó el registro de flota",
+  "enqueuedMsg": "Comando en cola {{id}}… (se ejecuta después de extraer el nodo)",
+  "enqueueFailed": "Error al poner en cola",
+  "loadCommandsFailed": "No se pudieron cargar los comandos",
+  "probedMsg": "Sondeado {{kind}}",
+  "probeFailed": "Sonda fallida",
+  "wroteUnitMsg": "Escribió {{kind}} configuración de la unidad",
+  "writeFailed": "Error de escritura",
+  "installedMsg": "Instalado {{kind}}",
+  "installIncomplete": "Instalación incompleta",
+  "badgeDryRun": "ejecución en seco",
+  "badgeBlocked": "obstruido",
+  "labelStderr": "stderr",
+  "labelAckCli": "reconocimiento + CLI JSON",
+  "labelStdoutBody": "Cuerpo de salida estándar CLI",
+  "resultOuterHint": "El resultado externo es CLI --json stdout."
+}

package/locales/es/ai.json

@@ -0,0 +1,61 @@
+{
+  "status": {
+    "completed": "Terminado",
+    "done": "Hecho",
+    "executed": "Ejecutado",
+    "failed": "Fallido",
+    "error": "Error",
+    "rejected": "Rechazado",
+    "pending": "Pendiente",
+    "planned": "Planificado",
+    "approved": "Aprobado",
+    "running": "Correr",
+    "cancelled": "Cancelado"
+  },
+  "activeCount": "{{count}} activo",
+  "taskCount": "{{count}} tareas",
+  "tasks": "Tareas",
+  "active": "Activo",
+  "tasksTab": "Tareas ({{count}})",
+  "playbooksTab": "Libros de jugadas ({{count}})",
+  "queueTitle": "cola de tareas",
+  "queueSub": "Seleccione para ver el plan y los pasos · sin acciones adicionales en el estado terminal",
+  "createTaskPlus": "+ Crear tarea",
+  "emptyTasks": "Aún no hay tareas",
+  "emptyTasksDesc": "Cree una tarea de la lista o ejecute un libro de estrategias",
+  "browsePlaybooks": "Explorar manuales",
+  "noPrompt": "(sin aviso)",
+  "stepsOf": "Pasos {{done}}/{{total}}",
+  "noPlanSummary": "(sin resumen del plan)",
+  "pipelineAria": "Fases de la tarea",
+  "phase": {
+    "plan": "Plan",
+    "approve": "Revisar",
+    "run": "Ejecutar",
+    "done": "Hecho"
+  },
+  "approveRun": "Aprobar y ejecutar",
+  "cancelTask": "Cancelar tarea",
+  "terminalHint": "Tarea finalizada: cree una nueva tarea o ejecute un libro de estrategias",
+  "stepsTitle": "Pasos ({{count}})",
+  "noSteps": "Aún no hay pasos",
+  "needsApproval": "Necesita aprobación",
+  "noApproval": "Sin aprobación",
+  "reject": "Rechazar",
+  "selectTask": "Seleccione una tarea",
+  "selectTaskDesc": "Elija una tarea a la izquierda para ver el plan y los pasos",
+  "playbooksTitle": "Libros de jugadas",
+  "playbooksSub": "Operaciones preestablecidas · la ejecución crea una tarea y cambia a Tareas",
+  "countItems": "{{count}}",
+  "searchPh": "Nombre / descripción",
+  "noPlaybooks": "No hay manuales que coincidan",
+  "noPlaybooksDesc": "Cambiar palabras clave o borrar búsqueda",
+  "run": "Correr",
+  "createTitle": "Crear tarea de IA",
+  "createDesc": "Planificación ≠ ejecutada. Las herramientas permanecen en la lista de permitidos.",
+  "generatePlan": "generar plan",
+  "promptLabel": "Instrucción en lenguaje natural",
+  "promptHint": "p.ej. comprobar la carga del host; o estado de nginx",
+  "promptPh": "Describe lo que quieres...",
+  "createHint": "Siguiente: Apruebe y ejecute en el detalle de la tarea o rechace pasos individuales."
+}

package/locales/es/apache.json

@@ -0,0 +1,57 @@
+{
+  "pageDesc": "Sitios Apache (proyectos PHP + independientes)",
+  "pillSites": "{{count}} sitios",
+  "listTitle": "Sitios ({{count}})",
+  "emptyTitle": "Sin sitios",
+  "createSite": "+ Crear sitio",
+  "createTitle": "Crear sitio",
+  "editTitle": "Editar sitio",
+  "deleteTitle": "¿Eliminar sitio?",
+  "deleteDesc": "¿Eliminar este sitio Apache?",
+  "colServerName": "Nombre del servidor",
+  "colSource": "Fuente",
+  "colKind": "Tipo",
+  "colTarget": "Objetivo",
+  "colStatus": "Estado",
+  "filterSource": "Filtro de fuente",
+  "sourceAll": "Todo",
+  "sourceProject": "Proyecto",
+  "sourceStandalone": "Autónomo",
+  "sourceArtifact": "En disco",
+  "openProject": "Abrir proyecto",
+  "kindLabel": "Tipo",
+  "kindProxy": "Apoderado",
+  "kindStatic": "Estático",
+  "kindPhp": "PHP",
+  "upstreamLabel": "Río arriba",
+  "rootLabel": "Raíz del documento",
+  "sslLabel": "SSL",
+  "apply": "Aplicar",
+  "notInstalled": "apache no instalado",
+  "globalSettings": "Configuraciones globales",
+  "siteSettings": "Configuración del sitio",
+  "saveApply": "Guardar y aplicar",
+  "settingsSaved": "Guardado",
+  "setGzip": "zip",
+  "setShowVersion": "Mostrar versión",
+  "setHttp2": "HTTP/2",
+  "setBody": "cuerpo máximo",
+  "setKeepalive": "Mantener vivo",
+  "setAccessLog": "Registro de acceso",
+  "logOn": "En",
+  "logOff": "Apagado",
+  "setForceHttps": "Forzar HTTPS",
+  "setHsts": "HSTS",
+  "setIndexes": "listado de directorio",
+  "bodyInherit": "Global",
+  "conflict": "Conflicto de nombres",
+  "conflictHint": "El mismo nombre de servidor tiene varias fuentes. Mantenga la fila del proyecto/independiente y elimine los discos huérfanos.",
+  "removeArtifact": "Eliminar residuos",
+  "removeArtifactTitle": "¿Eliminar configuración residual?",
+  "removeArtifactDesc": "Elimine esta configuración de Apache no reclamada del directorio de datos del panel y desactive el sistema gemelo cuando sea posible. No elimina el proyecto.",
+  "previewConf": "Vista previa de configuración",
+  "cleanupConflicts": "Limpiar los residuos del conflicto",
+  "cleanupConflictsTitle": "¿Limpiar todos los residuos del conflicto?",
+  "cleanupConflictsDesc": "Elimine todas las configuraciones de artefactos en el disco que entren en conflicto con un proyecto o un nombre de servidor independiente. Se mantienen las filas del proyecto.",
+  "artifactRemovedOk": "Configuración residual eliminada"
+}

package/locales/es/applyStatus.json

@@ -0,0 +1,11 @@
+{
+  "draft": "Borrador",
+  "written": "Escrito (datos del panel)",
+  "planned": "En curso",
+  "applied": "Aplicado en el host",
+  "failed": "Fallido",
+  "pendingExecute": "Necesita ejecución del host",
+  "uploaded": "subido",
+  "issued": "Emitido",
+  "missing": "Falta el archivo"
+}