wasmtime 24.0.0 → 25.0.0

data/ext/cargo-vendor/wasmtime-environ-24.0.0/src/fact/trampoline.rs

@@ -1,3234 +0,0 @@
-//! Low-level compilation of an fused adapter function.
-//!
-//! This module is tasked with the top-level `compile` function which creates a
-//! single WebAssembly function which will perform the steps of the fused
-//! adapter for an `AdapterData` provided. This is the "meat" of compilation
-//! where the validation of the canonical ABI or similar all happens to
-//! translate arguments from one module to another.
-//!
-//! ## Traps and their ordering
-//!
-//! Currently this compiler is pretty "loose" about the ordering of precisely
-//! what trap happens where. The main reason for this is that to core wasm all
-//! traps are the same and for fused adapters if a trap happens no intermediate
-//! side effects are visible (as designed by the canonical ABI itself). For this
-//! it's important to note that some of the precise choices of control flow here
-//! can be somewhat arbitrary, an intentional decision.
-
-use crate::component::{
-    CanonicalAbiInfo, ComponentTypesBuilder, FixedEncoding as FE, FlatType, InterfaceType,
-    StringEncoding, Transcode, TypeEnumIndex, TypeFlagsIndex, TypeListIndex, TypeOptionIndex,
-    TypeRecordIndex, TypeResourceTableIndex, TypeResultIndex, TypeTupleIndex, TypeVariantIndex,
-    VariantInfo, FLAG_MAY_ENTER, FLAG_MAY_LEAVE, MAX_FLAT_PARAMS, MAX_FLAT_RESULTS,
-};
-use crate::fact::signature::Signature;
-use crate::fact::transcode::Transcoder;
-use crate::fact::traps::Trap;
-use crate::fact::{
-    AdapterData, Body, Context, Function, FunctionId, Helper, HelperLocation, HelperType, Module,
-    Options,
-};
-use crate::prelude::*;
-use crate::{FuncIndex, GlobalIndex};
-use std::collections::HashMap;
-use std::mem;
-use std::ops::Range;
-use wasm_encoder::{BlockType, Encode, Instruction, Instruction::*, MemArg, ValType};
-use wasmtime_component_util::{DiscriminantSize, FlagsSize};
-
-const MAX_STRING_BYTE_LENGTH: u32 = 1 << 31;
-const UTF16_TAG: u32 = 1 << 31;
-
-/// This value is arbitrarily chosen and should be fine to change at any time,
-/// it just seemed like a halfway reasonable starting point.
-const INITIAL_FUEL: usize = 1_000;
-
-struct Compiler<'a, 'b> {
-    types: &'a ComponentTypesBuilder,
-    module: &'b mut Module<'a>,
-    result: FunctionId,
-
-    /// The encoded WebAssembly function body so far, not including locals.
-    code: Vec<u8>,
-
-    /// Total number of locals generated so far.
-    nlocals: u32,
-
-    /// Locals partitioned by type which are not currently in use.
-    free_locals: HashMap<ValType, Vec<u32>>,
-
-    /// Metadata about all `unreachable` trap instructions in this function and
-    /// what the trap represents. The offset within `self.code` is recorded as
-    /// well.
-    traps: Vec<(usize, Trap)>,
-
-    /// A heuristic which is intended to limit the size of a generated function
-    /// to a certain maximum to avoid generating arbitrarily large functions.
-    ///
-    /// This fuel counter is decremented each time `translate` is called and
-    /// when fuel is entirely consumed further translations, if necessary, will
-    /// be done through calls to other functions in the module. This is intended
-    /// to be a heuristic to split up the main function into theoretically
-    /// reusable portions.
-    fuel: usize,
-
-    /// Indicates whether an "enter call" should be emitted in the generated
-    /// function with a call to `Resource{Enter,Exit}Call` at the beginning and
-    /// end of the function for tracking of information related to borrowed
-    /// resources.
-    emit_resource_call: bool,
-}
-
-pub(super) fn compile(module: &mut Module<'_>, adapter: &AdapterData) {
-    let lower_sig = module.types.signature(&adapter.lower, Context::Lower);
-    let lift_sig = module.types.signature(&adapter.lift, Context::Lift);
-    let ty = module
-        .core_types
-        .function(&lower_sig.params, &lower_sig.results);
-    let result = module
-        .funcs
-        .push(Function::new(Some(adapter.name.clone()), ty));
-
-    // If this type signature contains any borrowed resources then invocations
-    // of enter/exit call for resource-related metadata tracking must be used.
-    // It shouldn't matter whether the lower/lift signature is used here as both
-    // should return the same answer.
-    let emit_resource_call = module.types.contains_borrow_resource(&adapter.lower);
-    assert_eq!(
-        emit_resource_call,
-        module.types.contains_borrow_resource(&adapter.lift)
-    );
-
-    Compiler {
-        types: module.types,
-        module,
-        code: Vec::new(),
-        nlocals: lower_sig.params.len() as u32,
-        free_locals: HashMap::new(),
-        traps: Vec::new(),
-        result,
-        fuel: INITIAL_FUEL,
-        emit_resource_call,
-    }
-    .compile_adapter(adapter, &lower_sig, &lift_sig)
-}
-
-/// Compiles a helper function as specified by the `Helper` configuration.
-///
-/// This function is invoked when the translation process runs out of fuel for
-/// some prior function which enqueues a helper to get translated later. This
-/// translation function will perform one type translation as specified by
-/// `Helper` which can either be in the stack or memory for each side.
-pub(super) fn compile_helper(module: &mut Module<'_>, result: FunctionId, helper: Helper) {
-    let mut nlocals = 0;
-    let src_flat;
-    let src = match helper.src.loc {
-        // If the source is on the stack then it's specified in the parameters
-        // to the function, so this creates the flattened representation and
-        // then lists those as the locals with appropriate types for the source
-        // values.
-        HelperLocation::Stack => {
-            src_flat = module
-                .types
-                .flatten_types(&helper.src.opts, usize::MAX, [helper.src.ty])
-                .unwrap()
-                .iter()
-                .enumerate()
-                .map(|(i, ty)| (i as u32, *ty))
-                .collect::<Vec<_>>();
-            nlocals += src_flat.len() as u32;
-            Source::Stack(Stack {
-                locals: &src_flat,
-                opts: &helper.src.opts,
-            })
-        }
-        // If the source is in memory then that's just propagated here as the
-        // first local is the pointer to the source.
-        HelperLocation::Memory => {
-            nlocals += 1;
-            Source::Memory(Memory {
-                opts: &helper.src.opts,
-                addr: TempLocal::new(0, helper.src.opts.ptr()),
-                offset: 0,
-            })
-        }
-    };
-    let dst_flat;
-    let dst = match helper.dst.loc {
-        // This is the same as the stack-based source although `Destination` is
-        // configured slightly differently.
-        HelperLocation::Stack => {
-            dst_flat = module
-                .types
-                .flatten_types(&helper.dst.opts, usize::MAX, [helper.dst.ty])
-                .unwrap();
-            Destination::Stack(&dst_flat, &helper.dst.opts)
-        }
-        // This is the same as a memory-based source but note that the address
-        // of the destination is passed as the final parameter to the function.
-        HelperLocation::Memory => {
-            nlocals += 1;
-            Destination::Memory(Memory {
-                opts: &helper.dst.opts,
-                addr: TempLocal::new(nlocals - 1, helper.dst.opts.ptr()),
-                offset: 0,
-            })
-        }
-    };
-    let mut compiler = Compiler {
-        types: module.types,
-        module,
-        code: Vec::new(),
-        nlocals,
-        free_locals: HashMap::new(),
-        traps: Vec::new(),
-        result,
-        fuel: INITIAL_FUEL,
-        // This is a helper function and only the top-level function is
-        // responsible for emitting these intrinsic calls.
-        emit_resource_call: false,
-    };
-    compiler.translate(&helper.src.ty, &src, &helper.dst.ty, &dst);
-    compiler.finish();
-}
-
-/// Possible ways that a interface value is represented in the core wasm
-/// canonical ABI.
-enum Source<'a> {
-    /// This value is stored on the "stack" in wasm locals.
-    ///
-    /// This could mean that it's inline from the parameters to the function or
-    /// that after a function call the results were stored in locals and the
-    /// locals are the inline results.
-    Stack(Stack<'a>),
-
-    /// This value is stored in linear memory described by the `Memory`
-    /// structure.
-    Memory(Memory<'a>),
-}
-
-/// Same as `Source` but for where values are translated into.
-enum Destination<'a> {
-    /// This value is destined for the WebAssembly stack which means that
-    /// results are simply pushed as we go along.
-    ///
-    /// The types listed are the types that are expected to be on the stack at
-    /// the end of translation.
-    Stack(&'a [ValType], &'a Options),
-
-    /// This value is to be placed in linear memory described by `Memory`.
-    Memory(Memory<'a>),
-}
-
-struct Stack<'a> {
-    /// The locals that comprise a particular value.
-    ///
-    /// The length of this list represents the flattened list of types that make
-    /// up the component value. Each list has the index of the local being
-    /// accessed as well as the type of the local itself.
-    locals: &'a [(u32, ValType)],
-    /// The lifting/lowering options for where this stack of values comes from
-    opts: &'a Options,
-}
-
-/// Representation of where a value is going to be stored in linear memory.
-struct Memory<'a> {
-    /// The lifting/lowering options with memory configuration
-    opts: &'a Options,
-    /// The index of the local that contains the base address of where the
-    /// storage is happening.
-    addr: TempLocal,
-    /// A "static" offset that will be baked into wasm instructions for where
-    /// memory loads/stores happen.
-    offset: u32,
-}
-
-impl Compiler<'_, '_> {
-    fn compile_adapter(
-        mut self,
-        adapter: &AdapterData,
-        lower_sig: &Signature,
-        lift_sig: &Signature,
-    ) {
-        // Check the instance flags required for this trampoline.
-        //
-        // This inserts the initial check required by `canon_lower` that the
-        // caller instance can be left and additionally checks the
-        // flags on the callee if necessary whether it can be entered.
-        self.trap_if_not_flag(adapter.lower.flags, FLAG_MAY_LEAVE, Trap::CannotLeave);
-        if adapter.called_as_export {
-            self.trap_if_not_flag(adapter.lift.flags, FLAG_MAY_ENTER, Trap::CannotEnter);
-            self.set_flag(adapter.lift.flags, FLAG_MAY_ENTER, false);
-        } else if self.module.debug {
-            self.assert_not_flag(
-                adapter.lift.flags,
-                FLAG_MAY_ENTER,
-                "may_enter should be unset",
-            );
-        }
-
-        if self.emit_resource_call {
-            let enter = self.module.import_resource_enter_call();
-            self.instruction(Call(enter.as_u32()));
-        }
-
-        // Perform the translation of arguments. Note that `FLAG_MAY_LEAVE` is
-        // cleared around this invocation for the callee as per the
-        // `canon_lift` definition in the spec. Additionally note that the
-        // precise ordering of traps here is not required since internal state
-        // is not visible to either instance and a trap will "lock down" both
-        // instances to no longer be visible. This means that we're free to
-        // reorder lifts/lowers and flags and such as is necessary and
-        // convenient here.
-        //
-        // TODO: if translation doesn't actually call any functions in either
-        // instance then there's no need to set/clear the flag here and that can
-        // be optimized away.
-        self.set_flag(adapter.lift.flags, FLAG_MAY_LEAVE, false);
-        let param_locals = lower_sig
-            .params
-            .iter()
-            .enumerate()
-            .map(|(i, ty)| (i as u32, *ty))
-            .collect::<Vec<_>>();
-        self.translate_params(adapter, &param_locals);
-        self.set_flag(adapter.lift.flags, FLAG_MAY_LEAVE, true);
-
-        // With all the arguments on the stack the actual target function is
-        // now invoked. The core wasm results of the function are then placed
-        // into locals for result translation afterwards.
-        self.instruction(Call(adapter.callee.as_u32()));
-        let mut result_locals = Vec::with_capacity(lift_sig.results.len());
-        let mut temps = Vec::new();
-        for ty in lift_sig.results.iter().rev() {
-            let local = self.local_set_new_tmp(*ty);
-            result_locals.push((local.idx, *ty));
-            temps.push(local);
-        }
-        result_locals.reverse();
-
-        // Like above during the translation of results the caller cannot be
-        // left (as we might invoke things like `realloc`). Again the precise
-        // order of everything doesn't matter since intermediate states cannot
-        // be witnessed, hence the setting of flags here to encapsulate both
-        // liftings and lowerings.
-        //
-        // TODO: like above the management of the `MAY_LEAVE` flag can probably
-        // be elided here for "simple" results.
-        self.set_flag(adapter.lower.flags, FLAG_MAY_LEAVE, false);
-        self.translate_results(adapter, &param_locals, &result_locals);
-        self.set_flag(adapter.lower.flags, FLAG_MAY_LEAVE, true);
-
-        // And finally post-return state is handled here once all results/etc
-        // are all translated.
-        if let Some(func) = adapter.lift.post_return {
-            for (result, _) in result_locals.iter() {
-                self.instruction(LocalGet(*result));
-            }
-            self.instruction(Call(func.as_u32()));
-        }
-        if adapter.called_as_export {
-            self.set_flag(adapter.lift.flags, FLAG_MAY_ENTER, true);
-        }
-
-        for tmp in temps {
-            self.free_temp_local(tmp);
-        }
-
-        if self.emit_resource_call {
-            let exit = self.module.import_resource_exit_call();
-            self.instruction(Call(exit.as_u32()));
-        }
-
-        self.finish()
-    }
-
-    fn translate_params(&mut self, adapter: &AdapterData, param_locals: &[(u32, ValType)]) {
-        let src_tys = self.types[adapter.lower.ty].params;
-        let src_tys = self.types[src_tys]
-            .types
-            .iter()
-            .copied()
-            .collect::<Vec<_>>();
-        let dst_tys = self.types[adapter.lift.ty].params;
-        let dst_tys = self.types[dst_tys]
-            .types
-            .iter()
-            .copied()
-            .collect::<Vec<_>>();
-        let lift_opts = &adapter.lift.options;
-        let lower_opts = &adapter.lower.options;
-
-        // TODO: handle subtyping
-        assert_eq!(src_tys.len(), dst_tys.len());
-
-        let src_flat =
-            self.types
-                .flatten_types(lower_opts, MAX_FLAT_PARAMS, src_tys.iter().copied());
-        let dst_flat =
-            self.types
-                .flatten_types(lift_opts, MAX_FLAT_PARAMS, dst_tys.iter().copied());
-
-        let src = if let Some(flat) = &src_flat {
-            Source::Stack(Stack {
-                locals: &param_locals[..flat.len()],
-                opts: lower_opts,
-            })
-        } else {
-            // If there are too many parameters then that means the parameters
-            // are actually a tuple stored in linear memory addressed by the
-            // first parameter local.
-            let (addr, ty) = param_locals[0];
-            assert_eq!(ty, lower_opts.ptr());
-            let align = src_tys
-                .iter()
-                .map(|t| self.types.align(lower_opts, t))
-                .max()
-                .unwrap_or(1);
-            Source::Memory(self.memory_operand(lower_opts, TempLocal::new(addr, ty), align))
-        };
-
-        let dst = if let Some(flat) = &dst_flat {
-            Destination::Stack(flat, lift_opts)
-        } else {
-            // If there are too many parameters then space is allocated in the
-            // destination module for the parameters via its `realloc` function.
-            let abi = CanonicalAbiInfo::record(dst_tys.iter().map(|t| self.types.canonical_abi(t)));
-            let (size, align) = if lift_opts.memory64 {
-                (abi.size64, abi.align64)
-            } else {
-                (abi.size32, abi.align32)
-            };
-            let size = MallocSize::Const(size);
-            Destination::Memory(self.malloc(lift_opts, size, align))
-        };
-
-        let srcs = src
-            .record_field_srcs(self.types, src_tys.iter().copied())
-            .zip(src_tys.iter());
-        let dsts = dst
-            .record_field_dsts(self.types, dst_tys.iter().copied())
-            .zip(dst_tys.iter());
-        for ((src, src_ty), (dst, dst_ty)) in srcs.zip(dsts) {
-            self.translate(&src_ty, &src, &dst_ty, &dst);
-        }
-
-        // If the destination was linear memory instead of the stack then the
-        // actual parameter that we're passing is the address of the values
-        // stored, so ensure that's happening in the wasm body here.
-        if let Destination::Memory(mem) = dst {
-            self.instruction(LocalGet(mem.addr.idx));
-            self.free_temp_local(mem.addr);
-        }
-    }
-
-    fn translate_results(
-        &mut self,
-        adapter: &AdapterData,
-        param_locals: &[(u32, ValType)],
-        result_locals: &[(u32, ValType)],
-    ) {
-        let src_tys = self.types[adapter.lift.ty].results;
-        let src_tys = self.types[src_tys]
-            .types
-            .iter()
-            .copied()
-            .collect::<Vec<_>>();
-        let dst_tys = self.types[adapter.lower.ty].results;
-        let dst_tys = self.types[dst_tys]
-            .types
-            .iter()
-            .copied()
-            .collect::<Vec<_>>();
-        let lift_opts = &adapter.lift.options;
-        let lower_opts = &adapter.lower.options;
-
-        let src_flat =
-            self.types
-                .flatten_types(lift_opts, MAX_FLAT_RESULTS, src_tys.iter().copied());
-        let dst_flat =
-            self.types
-                .flatten_types(lower_opts, MAX_FLAT_RESULTS, dst_tys.iter().copied());
-
-        let src = if src_flat.is_some() {
-            Source::Stack(Stack {
-                locals: result_locals,
-                opts: lift_opts,
-            })
-        } else {
-            // The original results to read from in this case come from the
-            // return value of the function itself. The imported function will
-            // return a linear memory address at which the values can be read
-            // from.
-            let align = src_tys
-                .iter()
-                .map(|t| self.types.align(lift_opts, t))
-                .max()
-                .unwrap_or(1);
-            assert_eq!(result_locals.len(), 1);
-            let (addr, ty) = result_locals[0];
-            assert_eq!(ty, lift_opts.ptr());
-            Source::Memory(self.memory_operand(lift_opts, TempLocal::new(addr, ty), align))
-        };
-
-        let dst = if let Some(flat) = &dst_flat {
-            Destination::Stack(flat, lower_opts)
-        } else {
-            // This is slightly different than `translate_params` where the
-            // return pointer was provided by the caller of this function
-            // meaning the last parameter local is a pointer into linear memory.
-            let align = dst_tys
-                .iter()
-                .map(|t| self.types.align(lower_opts, t))
-                .max()
-                .unwrap_or(1);
-            let (addr, ty) = *param_locals.last().expect("no retptr");
-            assert_eq!(ty, lower_opts.ptr());
-            Destination::Memory(self.memory_operand(lower_opts, TempLocal::new(addr, ty), align))
-        };
-
-        let srcs = src
-            .record_field_srcs(self.types, src_tys.iter().copied())
-            .zip(src_tys.iter());
-        let dsts = dst
-            .record_field_dsts(self.types, dst_tys.iter().copied())
-            .zip(dst_tys.iter());
-        for ((src, src_ty), (dst, dst_ty)) in srcs.zip(dsts) {
-            self.translate(&src_ty, &src, &dst_ty, &dst);
-        }
-    }
-
-    fn translate(
-        &mut self,
-        src_ty: &InterfaceType,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        if let Source::Memory(mem) = src {
-            self.assert_aligned(src_ty, mem);
-        }
-        if let Destination::Memory(mem) = dst {
-            self.assert_aligned(dst_ty, mem);
-        }
-
-        // Calculate a cost heuristic for what the translation of this specific
-        // layer of the type is going to incur. The purpose of this cost is that
-        // we'll deduct it from `self.fuel` and if no fuel is remaining then
-        // translation is outlined into a separate function rather than being
-        // translated into this function.
-        //
-        // The general goal is to avoid creating an exponentially sized function
-        // for a linearly sized input (the type section). By outlining helper
-        // functions there will ideally be a constant set of helper functions
-        // per type (to accommodate in-memory or on-stack transfers as well as
-        // src/dst options) which means that each function is at most a certain
-        // size and we have a linear number of functions which should guarantee
-        // an overall linear size of the output.
-        //
-        // To implement this the current heuristic is that each layer of
-        // translating a type has a cost associated with it and this cost is
-        // accounted for in `self.fuel`. Some conversions are considered free as
-        // they generate basically as much code as the `call` to the translation
-        // function while other are considered proportionally expensive to the
-        // size of the type. The hope is that some upper layers are of a type's
-        // translation are all inlined into one function but bottom layers end
-        // up getting outlined to separate functions. Theoretically, again this
-        // is built on hopes and dreams, the outlining can be shared amongst
-        // tightly-intertwined type hierarchies which will reduce the size of
-        // the output module due to the helpers being used.
-        //
-        // This heuristic of how to split functions has changed a few times in
-        // the past and this isn't necessarily guaranteed to be the final
-        // iteration.
-        let cost = match src_ty {
-            // These types are all quite simple to load/store and equate to
-            // basically the same cost of the `call` instruction to call an
-            // out-of-line translation function, so give them 0 cost.
-            InterfaceType::Bool
-            | InterfaceType::U8
-            | InterfaceType::S8
-            | InterfaceType::U16
-            | InterfaceType::S16
-            | InterfaceType::U32
-            | InterfaceType::S32
-            | InterfaceType::U64
-            | InterfaceType::S64
-            | InterfaceType::Float32
-            | InterfaceType::Float64 => 0,
-
-            // This has a small amount of validation associated with it, so
-            // give it a cost of 1.
-            InterfaceType::Char => 1,
-
-            // This has a fair bit of code behind it depending on the
-            // strings/encodings in play, so arbitrarily assign it this cost.
-            InterfaceType::String => 40,
-
-            // Iteration of a loop is along the lines of the cost of a string
-            // so give it the same cost
-            InterfaceType::List(_) => 40,
-
-            InterfaceType::Flags(i) => {
-                let count = self.module.types[*i].names.len();
-                match FlagsSize::from_count(count) {
-                    FlagsSize::Size0 => 0,
-                    FlagsSize::Size1 | FlagsSize::Size2 => 1,
-                    FlagsSize::Size4Plus(n) => n.into(),
-                }
-            }
-
-            InterfaceType::Record(i) => self.types[*i].fields.len(),
-            InterfaceType::Tuple(i) => self.types[*i].types.len(),
-            InterfaceType::Variant(i) => self.types[*i].cases.len(),
-            InterfaceType::Enum(i) => self.types[*i].names.len(),
-
-            // 2 cases to consider for each of these variants.
-            InterfaceType::Option(_) | InterfaceType::Result(_) => 2,
-
-            // TODO(#6696) - something nonzero, is 1 right?
-            InterfaceType::Own(_) | InterfaceType::Borrow(_) => 1,
-        };
-
-        match self.fuel.checked_sub(cost) {
-            // This function has enough fuel to perform the layer of translation
-            // necessary for this type, so the fuel is updated in-place and
-            // translation continues. Note that the recursion here is bounded by
-            // the static recursion limit for all interface types as imposed
-            // during the translation phase.
-            Some(n) => {
-                self.fuel = n;
-                match src_ty {
-                    InterfaceType::Bool => self.translate_bool(src, dst_ty, dst),
-                    InterfaceType::U8 => self.translate_u8(src, dst_ty, dst),
-                    InterfaceType::S8 => self.translate_s8(src, dst_ty, dst),
-                    InterfaceType::U16 => self.translate_u16(src, dst_ty, dst),
-                    InterfaceType::S16 => self.translate_s16(src, dst_ty, dst),
-                    InterfaceType::U32 => self.translate_u32(src, dst_ty, dst),
-                    InterfaceType::S32 => self.translate_s32(src, dst_ty, dst),
-                    InterfaceType::U64 => self.translate_u64(src, dst_ty, dst),
-                    InterfaceType::S64 => self.translate_s64(src, dst_ty, dst),
-                    InterfaceType::Float32 => self.translate_f32(src, dst_ty, dst),
-                    InterfaceType::Float64 => self.translate_f64(src, dst_ty, dst),
-                    InterfaceType::Char => self.translate_char(src, dst_ty, dst),
-                    InterfaceType::String => self.translate_string(src, dst_ty, dst),
-                    InterfaceType::List(t) => self.translate_list(*t, src, dst_ty, dst),
-                    InterfaceType::Record(t) => self.translate_record(*t, src, dst_ty, dst),
-                    InterfaceType::Flags(f) => self.translate_flags(*f, src, dst_ty, dst),
-                    InterfaceType::Tuple(t) => self.translate_tuple(*t, src, dst_ty, dst),
-                    InterfaceType::Variant(v) => self.translate_variant(*v, src, dst_ty, dst),
-                    InterfaceType::Enum(t) => self.translate_enum(*t, src, dst_ty, dst),
-                    InterfaceType::Option(t) => self.translate_option(*t, src, dst_ty, dst),
-                    InterfaceType::Result(t) => self.translate_result(*t, src, dst_ty, dst),
-                    InterfaceType::Own(t) => self.translate_own(*t, src, dst_ty, dst),
-                    InterfaceType::Borrow(t) => self.translate_borrow(*t, src, dst_ty, dst),
-                }
-            }
-
-            // This function does not have enough fuel left to perform this
-            // layer of translation so the translation is deferred to a helper
-            // function. The actual translation here is then done by marshalling
-            // the src/dst into the function we're calling and then processing
-            // the results.
-            None => {
-                let src_loc = match src {
-                    // If the source is on the stack then `stack_get` is used to
-                    // convert everything to the appropriate flat representation
-                    // for the source type.
-                    Source::Stack(stack) => {
-                        for (i, ty) in stack
-                            .opts
-                            .flat_types(src_ty, self.types)
-                            .unwrap()
-                            .iter()
-                            .enumerate()
-                        {
-                            let stack = stack.slice(i..i + 1);
-                            self.stack_get(&stack, (*ty).into());
-                        }
-                        HelperLocation::Stack
-                    }
-                    // If the source is in memory then the pointer is passed
-                    // through, but note that the offset must be factored in
-                    // here since the translation function will start from
-                    // offset 0.
-                    Source::Memory(mem) => {
-                        self.push_mem_addr(mem);
-                        HelperLocation::Memory
-                    }
-                };
-                let dst_loc = match dst {
-                    Destination::Stack(..) => HelperLocation::Stack,
-                    Destination::Memory(mem) => {
-                        self.push_mem_addr(mem);
-                        HelperLocation::Memory
-                    }
-                };
-                // Generate a `FunctionId` corresponding to the `Helper`
-                // configuration that is necessary here. This will ideally be a
-                // "cache hit" and use a preexisting helper which represents
-                // outlining what would otherwise be duplicate code within a
-                // function to one function.
-                let helper = self.module.translate_helper(Helper {
-                    src: HelperType {
-                        ty: *src_ty,
-                        opts: *src.opts(),
-                        loc: src_loc,
-                    },
-                    dst: HelperType {
-                        ty: *dst_ty,
-                        opts: *dst.opts(),
-                        loc: dst_loc,
-                    },
-                });
-                // Emit a `call` instruction which will get "relocated" to a
-                // function index once translation has completely finished.
-                self.flush_code();
-                self.module.funcs[self.result].body.push(Body::Call(helper));
-
-                // If the destination of the translation was on the stack then
-                // the types on the stack need to be optionally converted to
-                // different types (e.g. if the result here is part of a variant
-                // somewhere else).
-                //
-                // This translation happens inline here by popping the results
-                // into new locals and then using those locals to do a
-                // `stack_set`.
-                if let Destination::Stack(tys, opts) = dst {
-                    let flat = self
-                        .types
-                        .flatten_types(opts, usize::MAX, [*dst_ty])
-                        .unwrap();
-                    assert_eq!(flat.len(), tys.len());
-                    let locals = flat
-                        .iter()
-                        .rev()
-                        .map(|ty| self.local_set_new_tmp(*ty))
-                        .collect::<Vec<_>>();
-                    for (ty, local) in tys.iter().zip(locals.into_iter().rev()) {
-                        self.instruction(LocalGet(local.idx));
-                        self.stack_set(std::slice::from_ref(ty), local.ty);
-                        self.free_temp_local(local);
-                    }
-                }
-            }
-        }
-    }
-
-    fn push_mem_addr(&mut self, mem: &Memory<'_>) {
-        self.instruction(LocalGet(mem.addr.idx));
-        if mem.offset != 0 {
-            self.ptr_uconst(mem.opts, mem.offset);
-            self.ptr_add(mem.opts);
-        }
-    }
-
-    fn translate_bool(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::Bool));
-        self.push_dst_addr(dst);
-
-        // Booleans are canonicalized to 0 or 1 as they pass through the
-        // component boundary, so use a `select` instruction to do so.
-        self.instruction(I32Const(1));
-        self.instruction(I32Const(0));
-        match src {
-            Source::Memory(mem) => self.i32_load8u(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I32),
-        }
-        self.instruction(Select);
-
-        match dst {
-            Destination::Memory(mem) => self.i32_store8(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_u8(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::U8));
-        self.convert_u8_mask(src, dst, 0xff);
-    }
-
-    fn convert_u8_mask(&mut self, src: &Source<'_>, dst: &Destination<'_>, mask: u8) {
-        self.push_dst_addr(dst);
-        let mut needs_mask = true;
-        match src {
-            Source::Memory(mem) => {
-                self.i32_load8u(mem);
-                needs_mask = mask != 0xff;
-            }
-            Source::Stack(stack) => {
-                self.stack_get(stack, ValType::I32);
-            }
-        }
-        if needs_mask {
-            self.instruction(I32Const(i32::from(mask)));
-            self.instruction(I32And);
-        }
-        match dst {
-            Destination::Memory(mem) => self.i32_store8(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_s8(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::S8));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i32_load8s(mem),
-            Source::Stack(stack) => {
-                self.stack_get(stack, ValType::I32);
-                self.instruction(I32Extend8S);
-            }
-        }
-        match dst {
-            Destination::Memory(mem) => self.i32_store8(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_u16(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::U16));
-        self.convert_u16_mask(src, dst, 0xffff);
-    }
-
-    fn convert_u16_mask(&mut self, src: &Source<'_>, dst: &Destination<'_>, mask: u16) {
-        self.push_dst_addr(dst);
-        let mut needs_mask = true;
-        match src {
-            Source::Memory(mem) => {
-                self.i32_load16u(mem);
-                needs_mask = mask != 0xffff;
-            }
-            Source::Stack(stack) => {
-                self.stack_get(stack, ValType::I32);
-            }
-        }
-        if needs_mask {
-            self.instruction(I32Const(i32::from(mask)));
-            self.instruction(I32And);
-        }
-        match dst {
-            Destination::Memory(mem) => self.i32_store16(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_s16(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::S16));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i32_load16s(mem),
-            Source::Stack(stack) => {
-                self.stack_get(stack, ValType::I32);
-                self.instruction(I32Extend16S);
-            }
-        }
-        match dst {
-            Destination::Memory(mem) => self.i32_store16(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_u32(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::U32));
-        self.convert_u32_mask(src, dst, 0xffffffff)
-    }
-
-    fn convert_u32_mask(&mut self, src: &Source<'_>, dst: &Destination<'_>, mask: u32) {
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i32_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I32),
-        }
-        if mask != 0xffffffff {
-            self.instruction(I32Const(mask as i32));
-            self.instruction(I32And);
-        }
-        match dst {
-            Destination::Memory(mem) => self.i32_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_s32(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::S32));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i32_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I32),
-        }
-        match dst {
-            Destination::Memory(mem) => self.i32_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn translate_u64(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::U64));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i64_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I64),
-        }
-        match dst {
-            Destination::Memory(mem) => self.i64_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I64),
-        }
-    }
-
-    fn translate_s64(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::S64));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i64_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I64),
-        }
-        match dst {
-            Destination::Memory(mem) => self.i64_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I64),
-        }
-    }
-
-    fn translate_f32(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::Float32));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.f32_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::F32),
-        }
-        match dst {
-            Destination::Memory(mem) => self.f32_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::F32),
-        }
-    }
-
-    fn translate_f64(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        // TODO: subtyping
-        assert!(matches!(dst_ty, InterfaceType::Float64));
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.f64_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::F64),
-        }
-        match dst {
-            Destination::Memory(mem) => self.f64_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::F64),
-        }
-    }
-
-    fn translate_char(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        assert!(matches!(dst_ty, InterfaceType::Char));
-        match src {
-            Source::Memory(mem) => self.i32_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I32),
-        }
-        let local = self.local_set_new_tmp(ValType::I32);
-
-        // This sequence is copied from the output of LLVM for:
-        //
-        //      pub extern "C" fn foo(x: u32) -> char {
-        //          char::try_from(x)
-        //              .unwrap_or_else(|_| std::arch::wasm32::unreachable())
-        //      }
-        //
-        // Apparently this does what's required by the canonical ABI:
-        //
-        //    def i32_to_char(opts, i):
-        //      trap_if(i >= 0x110000)
-        //      trap_if(0xD800 <= i <= 0xDFFF)
-        //      return chr(i)
-        //
-        // ... but I don't know how it works other than "well I trust LLVM"
-        self.instruction(Block(BlockType::Empty));
-        self.instruction(Block(BlockType::Empty));
-        self.instruction(LocalGet(local.idx));
-        self.instruction(I32Const(0xd800));
-        self.instruction(I32Xor);
-        self.instruction(I32Const(-0x110000));
-        self.instruction(I32Add);
-        self.instruction(I32Const(-0x10f800));
-        self.instruction(I32LtU);
-        self.instruction(BrIf(0));
-        self.instruction(LocalGet(local.idx));
-        self.instruction(I32Const(0x110000));
-        self.instruction(I32Ne);
-        self.instruction(BrIf(1));
-        self.instruction(End);
-        self.trap(Trap::InvalidChar);
-        self.instruction(End);
-
-        self.push_dst_addr(dst);
-        self.instruction(LocalGet(local.idx));
-        match dst {
-            Destination::Memory(mem) => {
-                self.i32_store(mem);
-            }
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-
-        self.free_temp_local(local);
-    }
-
-    fn translate_string(&mut self, src: &Source<'_>, dst_ty: &InterfaceType, dst: &Destination) {
-        assert!(matches!(dst_ty, InterfaceType::String));
-        let src_opts = src.opts();
-        let dst_opts = dst.opts();
-
-        // Load the pointer/length of this string into temporary locals. These
-        // will be referenced a good deal so this just makes it easier to deal
-        // with them consistently below rather than trying to reload from memory
-        // for example.
-        match src {
-            Source::Stack(s) => {
-                assert_eq!(s.locals.len(), 2);
-                self.stack_get(&s.slice(0..1), src_opts.ptr());
-                self.stack_get(&s.slice(1..2), src_opts.ptr());
-            }
-            Source::Memory(mem) => {
-                self.ptr_load(mem);
-                self.ptr_load(&mem.bump(src_opts.ptr_size().into()));
-            }
-        }
-        let src_len = self.local_set_new_tmp(src_opts.ptr());
-        let src_ptr = self.local_set_new_tmp(src_opts.ptr());
-        let src_str = WasmString {
-            ptr: src_ptr,
-            len: src_len,
-            opts: src_opts,
-        };
-
-        let dst_str = match src_opts.string_encoding {
-            StringEncoding::Utf8 => match dst_opts.string_encoding {
-                StringEncoding::Utf8 => self.string_copy(&src_str, FE::Utf8, dst_opts, FE::Utf8),
-                StringEncoding::Utf16 => self.string_utf8_to_utf16(&src_str, dst_opts),
-                StringEncoding::CompactUtf16 => {
-                    self.string_to_compact(&src_str, FE::Utf8, dst_opts)
-                }
-            },
-
-            StringEncoding::Utf16 => {
-                self.verify_aligned(src_opts, src_str.ptr.idx, 2);
-                match dst_opts.string_encoding {
-                    StringEncoding::Utf8 => {
-                        self.string_deflate_to_utf8(&src_str, FE::Utf16, dst_opts)
-                    }
-                    StringEncoding::Utf16 => {
-                        self.string_copy(&src_str, FE::Utf16, dst_opts, FE::Utf16)
-                    }
-                    StringEncoding::CompactUtf16 => {
-                        self.string_to_compact(&src_str, FE::Utf16, dst_opts)
-                    }
-                }
-            }
-
-            StringEncoding::CompactUtf16 => {
-                self.verify_aligned(src_opts, src_str.ptr.idx, 2);
-
-                // Test the tag big to see if this is a utf16 or a latin1 string
-                // at runtime...
-                self.instruction(LocalGet(src_str.len.idx));
-                self.ptr_uconst(src_opts, UTF16_TAG);
-                self.ptr_and(src_opts);
-                self.ptr_if(src_opts, BlockType::Empty);
-
-                // In the utf16 block unset the upper bit from the length local
-                // so further calculations have the right value. Afterwards the
-                // string transcode proceeds assuming utf16.
-                self.instruction(LocalGet(src_str.len.idx));
-                self.ptr_uconst(src_opts, UTF16_TAG);
-                self.ptr_xor(src_opts);
-                self.instruction(LocalSet(src_str.len.idx));
-                let s1 = match dst_opts.string_encoding {
-                    StringEncoding::Utf8 => {
-                        self.string_deflate_to_utf8(&src_str, FE::Utf16, dst_opts)
-                    }
-                    StringEncoding::Utf16 => {
-                        self.string_copy(&src_str, FE::Utf16, dst_opts, FE::Utf16)
-                    }
-                    StringEncoding::CompactUtf16 => {
-                        self.string_compact_utf16_to_compact(&src_str, dst_opts)
-                    }
-                };
-
-                self.instruction(Else);
-
-                // In the latin1 block the `src_len` local is already the number
-                // of code units, so the string transcoding is all that needs to
-                // happen.
-                let s2 = match dst_opts.string_encoding {
-                    StringEncoding::Utf16 => {
-                        self.string_copy(&src_str, FE::Latin1, dst_opts, FE::Utf16)
-                    }
-                    StringEncoding::Utf8 => {
-                        self.string_deflate_to_utf8(&src_str, FE::Latin1, dst_opts)
-                    }
-                    StringEncoding::CompactUtf16 => {
-                        self.string_copy(&src_str, FE::Latin1, dst_opts, FE::Latin1)
-                    }
-                };
-                // Set our `s2` generated locals to the `s2` generated locals
-                // as the resulting pointer of this transcode.
-                self.instruction(LocalGet(s2.ptr.idx));
-                self.instruction(LocalSet(s1.ptr.idx));
-                self.instruction(LocalGet(s2.len.idx));
-                self.instruction(LocalSet(s1.len.idx));
-                self.instruction(End);
-                self.free_temp_local(s2.ptr);
-                self.free_temp_local(s2.len);
-                s1
-            }
-        };
-
-        // Store the ptr/length in the desired destination
-        match dst {
-            Destination::Stack(s, _) => {
-                self.instruction(LocalGet(dst_str.ptr.idx));
-                self.stack_set(&s[..1], dst_opts.ptr());
-                self.instruction(LocalGet(dst_str.len.idx));
-                self.stack_set(&s[1..], dst_opts.ptr());
-            }
-            Destination::Memory(mem) => {
-                self.instruction(LocalGet(mem.addr.idx));
-                self.instruction(LocalGet(dst_str.ptr.idx));
-                self.ptr_store(mem);
-                self.instruction(LocalGet(mem.addr.idx));
-                self.instruction(LocalGet(dst_str.len.idx));
-                self.ptr_store(&mem.bump(dst_opts.ptr_size().into()));
-            }
-        }
-
-        self.free_temp_local(src_str.ptr);
-        self.free_temp_local(src_str.len);
-        self.free_temp_local(dst_str.ptr);
-        self.free_temp_local(dst_str.len);
-    }
-
-    // Corresponding function for `store_string_copy` in the spec.
-    //
-    // This performs a transcoding of the string with a one-pass copy from
-    // the `src` encoding to the `dst` encoding. This is only possible for
-    // fixed encodings where the first allocation is guaranteed to be an
-    // appropriate fit so it's not suitable for all encodings.
-    //
-    // Imported host transcoding functions here take the src/dst pointers as
-    // well as the number of code units in the source (which always matches
-    // the number of code units in the destination). There is no return
-    // value from the transcode function since the encoding should always
-    // work on the first pass.
-    fn string_copy<'a>(
-        &mut self,
-        src: &WasmString<'_>,
-        src_enc: FE,
-        dst_opts: &'a Options,
-        dst_enc: FE,
-    ) -> WasmString<'a> {
-        assert!(dst_enc.width() >= src_enc.width());
-        self.validate_string_length(src, dst_enc);
-
-        // Calculate the source byte length given the size of each code
-        // unit. Note that this shouldn't overflow given
-        // `validate_string_length` above.
-        let mut src_byte_len_tmp = None;
-        let src_byte_len = if src_enc.width() == 1 {
-            src.len.idx
-        } else {
-            assert_eq!(src_enc.width(), 2);
-            self.instruction(LocalGet(src.len.idx));
-            self.ptr_uconst(src.opts, 1);
-            self.ptr_shl(src.opts);
-            let tmp = self.local_set_new_tmp(src.opts.ptr());
-            let ret = tmp.idx;
-            src_byte_len_tmp = Some(tmp);
-            ret
-        };
-
-        // Convert the source code units length to the destination byte
-        // length type.
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst_opts.ptr());
-        let dst_len = self.local_tee_new_tmp(dst_opts.ptr());
-        if dst_enc.width() > 1 {
-            assert_eq!(dst_enc.width(), 2);
-            self.ptr_uconst(dst_opts, 1);
-            self.ptr_shl(dst_opts);
-        }
-        let dst_byte_len = self.local_set_new_tmp(dst_opts.ptr());
-
-        // Allocate space in the destination using the calculated byte
-        // length.
-        let dst = {
-            let dst_mem = self.malloc(
-                dst_opts,
-                MallocSize::Local(dst_byte_len.idx),
-                dst_enc.width().into(),
-            );
-            WasmString {
-                ptr: dst_mem.addr,
-                len: dst_len,
-                opts: dst_opts,
-            }
-        };
-
-        // Validate that `src_len + src_ptr` and
-        // `dst_mem.addr_local + dst_byte_len` are both in-bounds. This
-        // is done by loading the last byte of the string and if that
-        // doesn't trap then it's known valid.
-        self.validate_string_inbounds(src, src_byte_len);
-        self.validate_string_inbounds(&dst, dst_byte_len.idx);
-
-        // If the validations pass then the host `transcode` intrinsic
-        // is invoked. This will either raise a trap or otherwise succeed
-        // in which case we're done.
-        let op = if src_enc == dst_enc {
-            Transcode::Copy(src_enc)
-        } else {
-            assert_eq!(src_enc, FE::Latin1);
-            assert_eq!(dst_enc, FE::Utf16);
-            Transcode::Latin1ToUtf16
-        };
-        let transcode = self.transcoder(src, &dst, op);
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(Call(transcode.as_u32()));
-
-        self.free_temp_local(dst_byte_len);
-        if let Some(tmp) = src_byte_len_tmp {
-            self.free_temp_local(tmp);
-        }
-
-        dst
-    }
-    // Corresponding function for `store_string_to_utf8` in the spec.
-    //
-    // This translation works by possibly performing a number of
-    // reallocations. First a buffer of size input-code-units is used to try
-    // to get the transcoding correct on the first try. If that fails the
-    // maximum worst-case size is used and then that is resized down if it's
-    // too large.
-    //
-    // The host transcoding function imported here will receive src ptr/len
-    // and dst ptr/len and return how many code units were consumed on both
-    // sides. The amount of code units consumed in the source dictates which
-    // branches are taken in this conversion.
-    fn string_deflate_to_utf8<'a>(
-        &mut self,
-        src: &WasmString<'_>,
-        src_enc: FE,
-        dst_opts: &'a Options,
-    ) -> WasmString<'a> {
-        self.validate_string_length(src, src_enc);
-
-        // Optimistically assume that the code unit length of the source is
-        // all that's needed in the destination. Perform that allocation
-        // here and proceed to transcoding below.
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst_opts.ptr());
-        let dst_len = self.local_tee_new_tmp(dst_opts.ptr());
-        let dst_byte_len = self.local_set_new_tmp(dst_opts.ptr());
-
-        let dst = {
-            let dst_mem = self.malloc(dst_opts, MallocSize::Local(dst_byte_len.idx), 1);
-            WasmString {
-                ptr: dst_mem.addr,
-                len: dst_len,
-                opts: dst_opts,
-            }
-        };
-
-        // Ensure buffers are all in-bounds
-        let mut src_byte_len_tmp = None;
-        let src_byte_len = match src_enc {
-            FE::Latin1 => src.len.idx,
-            FE::Utf16 => {
-                self.instruction(LocalGet(src.len.idx));
-                self.ptr_uconst(src.opts, 1);
-                self.ptr_shl(src.opts);
-                let tmp = self.local_set_new_tmp(src.opts.ptr());
-                let ret = tmp.idx;
-                src_byte_len_tmp = Some(tmp);
-                ret
-            }
-            FE::Utf8 => unreachable!(),
-        };
-        self.validate_string_inbounds(src, src_byte_len);
-        self.validate_string_inbounds(&dst, dst_byte_len.idx);
-
-        // Perform the initial transcode
-        let op = match src_enc {
-            FE::Latin1 => Transcode::Latin1ToUtf8,
-            FE::Utf16 => Transcode::Utf16ToUtf8,
-            FE::Utf8 => unreachable!(),
-        };
-        let transcode = self.transcoder(src, &dst, op);
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(LocalGet(dst_byte_len.idx));
-        self.instruction(Call(transcode.as_u32()));
-        self.instruction(LocalSet(dst.len.idx));
-        let src_len_tmp = self.local_set_new_tmp(src.opts.ptr());
-
-        // Test if the source was entirely transcoded by comparing
-        // `src_len_tmp`, the number of code units transcoded from the
-        // source, with `src_len`, the original number of code units.
-        self.instruction(LocalGet(src_len_tmp.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.ptr_ne(src.opts);
-        self.instruction(If(BlockType::Empty));
-
-        // Here a worst-case reallocation is performed to grow `dst_mem`.
-        // In-line a check is also performed that the worst-case byte size
-        // fits within the maximum size of strings.
-        self.instruction(LocalGet(dst.ptr.idx)); // old_ptr
-        self.instruction(LocalGet(dst_byte_len.idx)); // old_size
-        self.ptr_uconst(dst.opts, 1); // align
-        let factor = match src_enc {
-            FE::Latin1 => 2,
-            FE::Utf16 => 3,
-            _ => unreachable!(),
-        };
-        self.validate_string_length_u8(src, factor);
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst_opts.ptr());
-        self.ptr_uconst(dst_opts, factor.into());
-        self.ptr_mul(dst_opts);
-        self.instruction(LocalTee(dst_byte_len.idx));
-        self.instruction(Call(dst_opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-
-        // Verify that the destination is still in-bounds
-        self.validate_string_inbounds(&dst, dst_byte_len.idx);
-
-        // Perform another round of transcoding that should be guaranteed
-        // to succeed. Note that all the parameters here are offset by the
-        // results of the first transcoding to only perform the remaining
-        // transcode on the final units.
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src_len_tmp.idx));
-        if let FE::Utf16 = src_enc {
-            self.ptr_uconst(src.opts, 1);
-            self.ptr_shl(src.opts);
-        }
-        self.ptr_add(src.opts);
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(src_len_tmp.idx));
-        self.ptr_sub(src.opts);
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_add(dst.opts);
-        self.instruction(LocalGet(dst_byte_len.idx));
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_sub(dst.opts);
-        self.instruction(Call(transcode.as_u32()));
-
-        // Add the second result, the amount of destination units encoded,
-        // to `dst_len` so it's an accurate reflection of the final size of
-        // the destination buffer.
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_add(dst.opts);
-        self.instruction(LocalSet(dst.len.idx));
-
-        // In debug mode verify the first result consumed the entire string,
-        // otherwise simply discard it.
-        if self.module.debug {
-            self.instruction(LocalGet(src.len.idx));
-            self.instruction(LocalGet(src_len_tmp.idx));
-            self.ptr_sub(src.opts);
-            self.ptr_ne(src.opts);
-            self.instruction(If(BlockType::Empty));
-            self.trap(Trap::AssertFailed("should have finished encoding"));
-            self.instruction(End);
-        } else {
-            self.instruction(Drop);
-        }
-
-        // Perform a downsizing if the worst-case size was too large
-        self.instruction(LocalGet(dst.len.idx));
-        self.instruction(LocalGet(dst_byte_len.idx));
-        self.ptr_ne(dst.opts);
-        self.instruction(If(BlockType::Empty));
-        self.instruction(LocalGet(dst.ptr.idx)); // old_ptr
-        self.instruction(LocalGet(dst_byte_len.idx)); // old_size
-        self.ptr_uconst(dst.opts, 1); // align
-        self.instruction(LocalGet(dst.len.idx)); // new_size
-        self.instruction(Call(dst.opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-        self.instruction(End);
-
-        // If the first transcode was enough then assert that the returned
-        // amount of destination items written equals the byte size.
-        if self.module.debug {
-            self.instruction(Else);
-
-            self.instruction(LocalGet(dst.len.idx));
-            self.instruction(LocalGet(dst_byte_len.idx));
-            self.ptr_ne(dst_opts);
-            self.instruction(If(BlockType::Empty));
-            self.trap(Trap::AssertFailed("should have finished encoding"));
-            self.instruction(End);
-        }
-
-        self.instruction(End); // end of "first transcode not enough"
-
-        self.free_temp_local(src_len_tmp);
-        self.free_temp_local(dst_byte_len);
-        if let Some(tmp) = src_byte_len_tmp {
-            self.free_temp_local(tmp);
-        }
-
-        dst
-    }
-
-    // Corresponds to the `store_utf8_to_utf16` function in the spec.
-    //
-    // When converting utf-8 to utf-16 a pessimistic allocation is
-    // done which is twice the byte length of the utf-8 string.
-    // The host then transcodes and returns how many code units were
-    // actually used during the transcoding and if it's beneath the
-    // pessimistic maximum then the buffer is reallocated down to
-    // a smaller amount.
-    //
-    // The host-imported transcoding function takes the src/dst pointer as
-    // well as the code unit size of both the source and destination. The
-    // destination should always be big enough to hold the result of the
-    // transcode and so the result of the host function is how many code
-    // units were written to the destination.
-    fn string_utf8_to_utf16<'a>(
-        &mut self,
-        src: &WasmString<'_>,
-        dst_opts: &'a Options,
-    ) -> WasmString<'a> {
-        self.validate_string_length(src, FE::Utf16);
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst_opts.ptr());
-        let dst_len = self.local_tee_new_tmp(dst_opts.ptr());
-        self.ptr_uconst(dst_opts, 1);
-        self.ptr_shl(dst_opts);
-        let dst_byte_len = self.local_set_new_tmp(dst_opts.ptr());
-        let dst = {
-            let dst_mem = self.malloc(dst_opts, MallocSize::Local(dst_byte_len.idx), 2);
-            WasmString {
-                ptr: dst_mem.addr,
-                len: dst_len,
-                opts: dst_opts,
-            }
-        };
-
-        self.validate_string_inbounds(src, src.len.idx);
-        self.validate_string_inbounds(&dst, dst_byte_len.idx);
-
-        let transcode = self.transcoder(src, &dst, Transcode::Utf8ToUtf16);
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(Call(transcode.as_u32()));
-        self.instruction(LocalSet(dst.len.idx));
-
-        // If the number of code units returned by transcode is not
-        // equal to the original number of code units then
-        // the buffer must be shrunk.
-        //
-        // Note that the byte length of the final allocation we
-        // want is twice the code unit length returned by the
-        // transcoding function.
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst.opts.ptr());
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_ne(dst_opts);
-        self.instruction(If(BlockType::Empty));
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(LocalGet(dst_byte_len.idx));
-        self.ptr_uconst(dst.opts, 2);
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_uconst(dst.opts, 1);
-        self.ptr_shl(dst.opts);
-        self.instruction(Call(dst.opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-        self.instruction(End); // end of shrink-to-fit
-
-        self.free_temp_local(dst_byte_len);
-
-        dst
-    }
-
-    // Corresponds to `store_probably_utf16_to_latin1_or_utf16` in the spec.
-    //
-    // This will try to transcode the input utf16 string to utf16 in the
-    // destination. If utf16 isn't needed though and latin1 could be used
-    // then that's used instead and a reallocation to downsize occurs
-    // afterwards.
-    //
-    // The host transcode function here will take the src/dst pointers as
-    // well as src length. The destination byte length is twice the src code
-    // unit length. The return value is the tagged length of the returned
-    // string. If the upper bit is set then utf16 was used and the
-    // conversion is done. If the upper bit is not set then latin1 was used
-    // and a downsizing needs to happen.
-    fn string_compact_utf16_to_compact<'a>(
-        &mut self,
-        src: &WasmString<'_>,
-        dst_opts: &'a Options,
-    ) -> WasmString<'a> {
-        self.validate_string_length(src, FE::Utf16);
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst_opts.ptr());
-        let dst_len = self.local_tee_new_tmp(dst_opts.ptr());
-        self.ptr_uconst(dst_opts, 1);
-        self.ptr_shl(dst_opts);
-        let dst_byte_len = self.local_set_new_tmp(dst_opts.ptr());
-        let dst = {
-            let dst_mem = self.malloc(dst_opts, MallocSize::Local(dst_byte_len.idx), 2);
-            WasmString {
-                ptr: dst_mem.addr,
-                len: dst_len,
-                opts: dst_opts,
-            }
-        };
-
-        self.convert_src_len_to_dst(dst_byte_len.idx, dst.opts.ptr(), src.opts.ptr());
-        let src_byte_len = self.local_set_new_tmp(src.opts.ptr());
-
-        self.validate_string_inbounds(src, src_byte_len.idx);
-        self.validate_string_inbounds(&dst, dst_byte_len.idx);
-
-        let transcode = self.transcoder(src, &dst, Transcode::Utf16ToCompactProbablyUtf16);
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(Call(transcode.as_u32()));
-        self.instruction(LocalSet(dst.len.idx));
-
-        // Assert that the untagged code unit length is the same as the
-        // source code unit length.
-        if self.module.debug {
-            self.instruction(LocalGet(dst.len.idx));
-            self.ptr_uconst(dst.opts, !UTF16_TAG);
-            self.ptr_and(dst.opts);
-            self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst.opts.ptr());
-            self.ptr_ne(dst.opts);
-            self.instruction(If(BlockType::Empty));
-            self.trap(Trap::AssertFailed("expected equal code units"));
-            self.instruction(End);
-        }
-
-        // If the UTF16_TAG is set then utf16 was used and the destination
-        // should be appropriately sized. Bail out of the "is this string
-        // empty" block and fall through otherwise to resizing.
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_uconst(dst.opts, UTF16_TAG);
-        self.ptr_and(dst.opts);
-        self.ptr_br_if(dst.opts, 0);
-
-        // Here `realloc` is used to downsize the string
-        self.instruction(LocalGet(dst.ptr.idx)); // old_ptr
-        self.instruction(LocalGet(dst_byte_len.idx)); // old_size
-        self.ptr_uconst(dst.opts, 2); // align
-        self.instruction(LocalGet(dst.len.idx)); // new_size
-        self.instruction(Call(dst.opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-
-        self.free_temp_local(dst_byte_len);
-        self.free_temp_local(src_byte_len);
-
-        dst
-    }
-
-    // Corresponds to `store_string_to_latin1_or_utf16` in the spec.
-    //
-    // This will attempt a first pass of transcoding to latin1 and on
-    // failure a larger buffer is allocated for utf16 and then utf16 is
-    // encoded in-place into the buffer. After either latin1 or utf16 the
-    // buffer is then resized to fit the final string allocation.
-    fn string_to_compact<'a>(
-        &mut self,
-        src: &WasmString<'_>,
-        src_enc: FE,
-        dst_opts: &'a Options,
-    ) -> WasmString<'a> {
-        self.validate_string_length(src, src_enc);
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst_opts.ptr());
-        let dst_len = self.local_tee_new_tmp(dst_opts.ptr());
-        let dst_byte_len = self.local_set_new_tmp(dst_opts.ptr());
-        let dst = {
-            let dst_mem = self.malloc(dst_opts, MallocSize::Local(dst_byte_len.idx), 2);
-            WasmString {
-                ptr: dst_mem.addr,
-                len: dst_len,
-                opts: dst_opts,
-            }
-        };
-
-        self.validate_string_inbounds(src, src.len.idx);
-        self.validate_string_inbounds(&dst, dst_byte_len.idx);
-
-        // Perform the initial latin1 transcode. This returns the number of
-        // source code units consumed and the number of destination code
-        // units (bytes) written.
-        let (latin1, utf16) = match src_enc {
-            FE::Utf8 => (Transcode::Utf8ToLatin1, Transcode::Utf8ToCompactUtf16),
-            FE::Utf16 => (Transcode::Utf16ToLatin1, Transcode::Utf16ToCompactUtf16),
-            FE::Latin1 => unreachable!(),
-        };
-        let transcode_latin1 = self.transcoder(src, &dst, latin1);
-        let transcode_utf16 = self.transcoder(src, &dst, utf16);
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.instruction(Call(transcode_latin1.as_u32()));
-        self.instruction(LocalSet(dst.len.idx));
-        let src_len_tmp = self.local_set_new_tmp(src.opts.ptr());
-
-        // If the source was entirely consumed then the transcode completed
-        // and all that's necessary is to optionally shrink the buffer.
-        self.instruction(LocalGet(src_len_tmp.idx));
-        self.instruction(LocalGet(src.len.idx));
-        self.ptr_eq(src.opts);
-        self.instruction(If(BlockType::Empty)); // if latin1-or-utf16 block
-
-        // Test if the original byte length of the allocation is the same as
-        // the number of written bytes, and if not then shrink the buffer
-        // with a call to `realloc`.
-        self.instruction(LocalGet(dst_byte_len.idx));
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_ne(dst.opts);
-        self.instruction(If(BlockType::Empty));
-        self.instruction(LocalGet(dst.ptr.idx)); // old_ptr
-        self.instruction(LocalGet(dst_byte_len.idx)); // old_size
-        self.ptr_uconst(dst.opts, 2); // align
-        self.instruction(LocalGet(dst.len.idx)); // new_size
-        self.instruction(Call(dst.opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-        self.instruction(End);
-
-        // In this block the latin1 encoding failed. The host transcode
-        // returned how many units were consumed from the source and how
-        // many bytes were written to the destination. Here the buffer is
-        // inflated and sized and the second utf16 intrinsic is invoked to
-        // perform the final inflation.
-        self.instruction(Else); // else latin1-or-utf16 block
-
-        // For utf8 validate that the inflated size is still within bounds.
-        if src_enc.width() == 1 {
-            self.validate_string_length_u8(src, 2);
-        }
-
-        // Reallocate the buffer with twice the source code units in byte
-        // size.
-        self.instruction(LocalGet(dst.ptr.idx)); // old_ptr
-        self.instruction(LocalGet(dst_byte_len.idx)); // old_size
-        self.ptr_uconst(dst.opts, 2); // align
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst.opts.ptr());
-        self.ptr_uconst(dst.opts, 1);
-        self.ptr_shl(dst.opts);
-        self.instruction(LocalTee(dst_byte_len.idx));
-        self.instruction(Call(dst.opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-
-        // Call the host utf16 transcoding function. This will inflate the
-        // prior latin1 bytes and then encode the rest of the source string
-        // as utf16 into the remaining space in the destination buffer.
-        self.instruction(LocalGet(src.ptr.idx));
-        self.instruction(LocalGet(src_len_tmp.idx));
-        if let FE::Utf16 = src_enc {
-            self.ptr_uconst(src.opts, 1);
-            self.ptr_shl(src.opts);
-        }
-        self.ptr_add(src.opts);
-        self.instruction(LocalGet(src.len.idx));
-        self.instruction(LocalGet(src_len_tmp.idx));
-        self.ptr_sub(src.opts);
-        self.instruction(LocalGet(dst.ptr.idx));
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst.opts.ptr());
-        self.instruction(LocalGet(dst.len.idx));
-        self.instruction(Call(transcode_utf16.as_u32()));
-        self.instruction(LocalSet(dst.len.idx));
-
-        // If the returned number of code units written to the destination
-        // is not equal to the size of the allocation then the allocation is
-        // resized down to the appropriate size.
-        //
-        // Note that the byte size desired is `2*dst_len` and the current
-        // byte buffer size is `2*src_len` so the `2` factor isn't checked
-        // here, just the lengths.
-        self.instruction(LocalGet(dst.len.idx));
-        self.convert_src_len_to_dst(src.len.idx, src.opts.ptr(), dst.opts.ptr());
-        self.ptr_ne(dst.opts);
-        self.instruction(If(BlockType::Empty));
-        self.instruction(LocalGet(dst.ptr.idx)); // old_ptr
-        self.instruction(LocalGet(dst_byte_len.idx)); // old_size
-        self.ptr_uconst(dst.opts, 2); // align
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_uconst(dst.opts, 1);
-        self.ptr_shl(dst.opts);
-        self.instruction(Call(dst.opts.realloc.unwrap().as_u32()));
-        self.instruction(LocalSet(dst.ptr.idx));
-        self.instruction(End);
-
-        // Tag the returned pointer as utf16
-        self.instruction(LocalGet(dst.len.idx));
-        self.ptr_uconst(dst.opts, UTF16_TAG);
-        self.ptr_or(dst.opts);
-        self.instruction(LocalSet(dst.len.idx));
-
-        self.instruction(End); // end latin1-or-utf16 block
-
-        self.free_temp_local(src_len_tmp);
-        self.free_temp_local(dst_byte_len);
-
-        dst
-    }
-
-    fn validate_string_length(&mut self, src: &WasmString<'_>, dst: FE) {
-        self.validate_string_length_u8(src, dst.width())
-    }
-
-    fn validate_string_length_u8(&mut self, s: &WasmString<'_>, dst: u8) {
-        // Check to see if the source byte length is out of bounds in
-        // which case a trap is generated.
-        self.instruction(LocalGet(s.len.idx));
-        let max = MAX_STRING_BYTE_LENGTH / u32::from(dst);
-        self.ptr_uconst(s.opts, max);
-        self.ptr_ge_u(s.opts);
-        self.instruction(If(BlockType::Empty));
-        self.trap(Trap::StringLengthTooBig);
-        self.instruction(End);
-    }
-
-    fn transcoder(
-        &mut self,
-        src: &WasmString<'_>,
-        dst: &WasmString<'_>,
-        op: Transcode,
-    ) -> FuncIndex {
-        self.module.import_transcoder(Transcoder {
-            from_memory: src.opts.memory.unwrap(),
-            from_memory64: src.opts.memory64,
-            to_memory: dst.opts.memory.unwrap(),
-            to_memory64: dst.opts.memory64,
-            op,
-        })
-    }
-
-    fn validate_string_inbounds(&mut self, s: &WasmString<'_>, byte_len: u32) {
-        self.validate_memory_inbounds(s.opts, s.ptr.idx, byte_len, Trap::StringLengthOverflow)
-    }
-
-    fn validate_memory_inbounds(
-        &mut self,
-        opts: &Options,
-        ptr_local: u32,
-        byte_len_local: u32,
-        trap: Trap,
-    ) {
-        let extend_to_64 = |me: &mut Self| {
-            if !opts.memory64 {
-                me.instruction(I64ExtendI32U);
-            }
-        };
-
-        self.instruction(Block(BlockType::Empty));
-        self.instruction(Block(BlockType::Empty));
-
-        // Calculate the full byte size of memory with `memory.size`. Note that
-        // arithmetic here is done always in 64-bits to accommodate 4G memories.
-        // Additionally it's assumed that 64-bit memories never fill up
-        // entirely.
-        self.instruction(MemorySize(opts.memory.unwrap().as_u32()));
-        extend_to_64(self);
-        self.instruction(I64Const(16));
-        self.instruction(I64Shl);
-
-        // Calculate the end address of the string. This is done by adding the
-        // base pointer to the byte length. For 32-bit memories there's no need
-        // to check for overflow since everything is extended to 64-bit, but for
-        // 64-bit memories overflow is checked.
-        self.instruction(LocalGet(ptr_local));
-        extend_to_64(self);
-        self.instruction(LocalGet(byte_len_local));
-        extend_to_64(self);
-        self.instruction(I64Add);
-        if opts.memory64 {
-            let tmp = self.local_tee_new_tmp(ValType::I64);
-            self.instruction(LocalGet(ptr_local));
-            self.ptr_lt_u(opts);
-            self.instruction(BrIf(0));
-            self.instruction(LocalGet(tmp.idx));
-            self.free_temp_local(tmp);
-        }
-
-        // If the byte size of memory is greater than the final address of the
-        // string then the string is invalid. Note that if it's precisely equal
-        // then that's ok.
-        self.instruction(I64GeU);
-        self.instruction(BrIf(1));
-
-        self.instruction(End);
-        self.trap(trap);
-        self.instruction(End);
-    }
-
-    fn translate_list(
-        &mut self,
-        src_ty: TypeListIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_element_ty = &self.types[src_ty].element;
-        let dst_element_ty = match dst_ty {
-            InterfaceType::List(r) => &self.types[*r].element,
-            _ => panic!("expected a list"),
-        };
-        let src_opts = src.opts();
-        let dst_opts = dst.opts();
-        let (src_size, src_align) = self.types.size_align(src_opts, src_element_ty);
-        let (dst_size, dst_align) = self.types.size_align(dst_opts, dst_element_ty);
-
-        // Load the pointer/length of this list into temporary locals. These
-        // will be referenced a good deal so this just makes it easier to deal
-        // with them consistently below rather than trying to reload from memory
-        // for example.
-        match src {
-            Source::Stack(s) => {
-                assert_eq!(s.locals.len(), 2);
-                self.stack_get(&s.slice(0..1), src_opts.ptr());
-                self.stack_get(&s.slice(1..2), src_opts.ptr());
-            }
-            Source::Memory(mem) => {
-                self.ptr_load(mem);
-                self.ptr_load(&mem.bump(src_opts.ptr_size().into()));
-            }
-        }
-        let src_len = self.local_set_new_tmp(src_opts.ptr());
-        let src_ptr = self.local_set_new_tmp(src_opts.ptr());
-
-        // Create a `Memory` operand which will internally assert that the
-        // `src_ptr` value is properly aligned.
-        let src_mem = self.memory_operand(src_opts, src_ptr, src_align);
-
-        // Calculate the source/destination byte lengths into unique locals.
-        let src_byte_len = self.calculate_list_byte_len(src_opts, src_len.idx, src_size);
-        let dst_byte_len = if src_size == dst_size {
-            self.convert_src_len_to_dst(src_byte_len.idx, src_opts.ptr(), dst_opts.ptr());
-            self.local_set_new_tmp(dst_opts.ptr())
-        } else if src_opts.ptr() == dst_opts.ptr() {
-            self.calculate_list_byte_len(dst_opts, src_len.idx, dst_size)
-        } else {
-            self.convert_src_len_to_dst(src_byte_len.idx, src_opts.ptr(), dst_opts.ptr());
-            let tmp = self.local_set_new_tmp(dst_opts.ptr());
-            let ret = self.calculate_list_byte_len(dst_opts, tmp.idx, dst_size);
-            self.free_temp_local(tmp);
-            ret
-        };
-
-        // Here `realloc` is invoked (in a `malloc`-like fashion) to allocate
-        // space for the list in the destination memory. This will also
-        // internally insert checks that the returned pointer is aligned
-        // correctly for the destination.
-        let dst_mem = self.malloc(dst_opts, MallocSize::Local(dst_byte_len.idx), dst_align);
-
-        // With all the pointers and byte lengths verity that both the source
-        // and the destination buffers are in-bounds.
-        self.validate_memory_inbounds(
-            src_opts,
-            src_mem.addr.idx,
-            src_byte_len.idx,
-            Trap::ListByteLengthOverflow,
-        );
-        self.validate_memory_inbounds(
-            dst_opts,
-            dst_mem.addr.idx,
-            dst_byte_len.idx,
-            Trap::ListByteLengthOverflow,
-        );
-
-        self.free_temp_local(src_byte_len);
-        self.free_temp_local(dst_byte_len);
-
-        // This is the main body of the loop to actually translate list types.
-        // Note that if both element sizes are 0 then this won't actually do
-        // anything so the loop is removed entirely.
-        if src_size > 0 || dst_size > 0 {
-            // This block encompasses the entire loop and is use to exit before even
-            // entering the loop if the list size is zero.
-            self.instruction(Block(BlockType::Empty));
-
-            // Set the `remaining` local and only continue if it's > 0
-            self.instruction(LocalGet(src_len.idx));
-            let remaining = self.local_tee_new_tmp(src_opts.ptr());
-            self.ptr_eqz(src_opts);
-            self.instruction(BrIf(0));
-
-            // Initialize the two destination pointers to their initial values
-            self.instruction(LocalGet(src_mem.addr.idx));
-            let cur_src_ptr = self.local_set_new_tmp(src_opts.ptr());
-            self.instruction(LocalGet(dst_mem.addr.idx));
-            let cur_dst_ptr = self.local_set_new_tmp(dst_opts.ptr());
-
-            self.instruction(Loop(BlockType::Empty));
-
-            // Translate the next element in the list
-            let element_src = Source::Memory(Memory {
-                opts: src_opts,
-                offset: 0,
-                addr: TempLocal::new(cur_src_ptr.idx, cur_src_ptr.ty),
-            });
-            let element_dst = Destination::Memory(Memory {
-                opts: dst_opts,
-                offset: 0,
-                addr: TempLocal::new(cur_dst_ptr.idx, cur_dst_ptr.ty),
-            });
-            self.translate(src_element_ty, &element_src, dst_element_ty, &element_dst);
-
-            // Update the two loop pointers
-            if src_size > 0 {
-                self.instruction(LocalGet(cur_src_ptr.idx));
-                self.ptr_uconst(src_opts, src_size);
-                self.ptr_add(src_opts);
-                self.instruction(LocalSet(cur_src_ptr.idx));
-            }
-            if dst_size > 0 {
-                self.instruction(LocalGet(cur_dst_ptr.idx));
-                self.ptr_uconst(dst_opts, dst_size);
-                self.ptr_add(dst_opts);
-                self.instruction(LocalSet(cur_dst_ptr.idx));
-            }
-
-            // Update the remaining count, falling through to break out if it's zero
-            // now.
-            self.instruction(LocalGet(remaining.idx));
-            self.ptr_iconst(src_opts, -1);
-            self.ptr_add(src_opts);
-            self.instruction(LocalTee(remaining.idx));
-            self.ptr_br_if(src_opts, 0);
-            self.instruction(End); // end of loop
-            self.instruction(End); // end of block
-
-            self.free_temp_local(cur_dst_ptr);
-            self.free_temp_local(cur_src_ptr);
-            self.free_temp_local(remaining);
-        }
-
-        // Store the ptr/length in the desired destination
-        match dst {
-            Destination::Stack(s, _) => {
-                self.instruction(LocalGet(dst_mem.addr.idx));
-                self.stack_set(&s[..1], dst_opts.ptr());
-                self.convert_src_len_to_dst(src_len.idx, src_opts.ptr(), dst_opts.ptr());
-                self.stack_set(&s[1..], dst_opts.ptr());
-            }
-            Destination::Memory(mem) => {
-                self.instruction(LocalGet(mem.addr.idx));
-                self.instruction(LocalGet(dst_mem.addr.idx));
-                self.ptr_store(mem);
-                self.instruction(LocalGet(mem.addr.idx));
-                self.convert_src_len_to_dst(src_len.idx, src_opts.ptr(), dst_opts.ptr());
-                self.ptr_store(&mem.bump(dst_opts.ptr_size().into()));
-            }
-        }
-
-        self.free_temp_local(src_len);
-        self.free_temp_local(src_mem.addr);
-        self.free_temp_local(dst_mem.addr);
-    }
-
-    fn calculate_list_byte_len(
-        &mut self,
-        opts: &Options,
-        len_local: u32,
-        elt_size: u32,
-    ) -> TempLocal {
-        // Zero-size types are easy to handle here because the byte size of the
-        // destination is always zero.
-        if elt_size == 0 {
-            self.ptr_uconst(opts, 0);
-            return self.local_set_new_tmp(opts.ptr());
-        }
-
-        // For one-byte elements in the destination the check here can be a bit
-        // more optimal than the general case below. In these situations if the
-        // source pointer type is 32-bit then we're guaranteed to not overflow,
-        // so the source length is simply casted to the destination's type.
-        //
-        // If the source is 64-bit then all that needs to be checked is to
-        // ensure that it does not have the upper 32-bits set.
-        if elt_size == 1 {
-            if let ValType::I64 = opts.ptr() {
-                self.instruction(LocalGet(len_local));
-                self.instruction(I64Const(32));
-                self.instruction(I64ShrU);
-                self.instruction(I32WrapI64);
-                self.instruction(If(BlockType::Empty));
-                self.trap(Trap::ListByteLengthOverflow);
-                self.instruction(End);
-            }
-            self.instruction(LocalGet(len_local));
-            return self.local_set_new_tmp(opts.ptr());
-        }
-
-        // The main check implemented by this function is to verify that
-        // `src_len_local` does not exceed the 32-bit range. Byte sizes for
-        // lists must always fit in 32-bits to get transferred to 32-bit
-        // memories.
-        self.instruction(Block(BlockType::Empty));
-        self.instruction(Block(BlockType::Empty));
-        self.instruction(LocalGet(len_local));
-        match opts.ptr() {
-            // The source's list length is guaranteed to be less than 32-bits
-            // so simply extend it up to a 64-bit type for the multiplication
-            // below.
-            ValType::I32 => self.instruction(I64ExtendI32U),
-
-            // If the source is a 64-bit memory then if the item length doesn't
-            // fit in 32-bits the byte length definitely won't, so generate a
-            // branch to our overflow trap here if any of the upper 32-bits are set.
-            ValType::I64 => {
-                self.instruction(I64Const(32));
-                self.instruction(I64ShrU);
-                self.instruction(I32WrapI64);
-                self.instruction(BrIf(0));
-                self.instruction(LocalGet(len_local));
-            }
-
-            _ => unreachable!(),
-        }
-
-        // Next perform a 64-bit multiplication with the element byte size that
-        // is itself guaranteed to fit in 32-bits. The result is then checked
-        // to see if we overflowed the 32-bit space. The two input operands to
-        // the multiplication are guaranteed to be 32-bits at most which means
-        // that this multiplication shouldn't overflow.
-        //
-        // The result of the multiplication is saved into a local as well to
-        // get the result afterwards.
-        self.instruction(I64Const(elt_size.into()));
-        self.instruction(I64Mul);
-        let tmp = self.local_tee_new_tmp(ValType::I64);
-        // Branch to success if the upper 32-bits are zero, otherwise
-        // fall-through to the trap.
-        self.instruction(I64Const(32));
-        self.instruction(I64ShrU);
-        self.instruction(I64Eqz);
-        self.instruction(BrIf(1));
-        self.instruction(End);
-        self.trap(Trap::ListByteLengthOverflow);
-        self.instruction(End);
-
-        // If a fresh local was used to store the result of the multiplication
-        // then convert it down to 32-bits which should be guaranteed to not
-        // lose information at this point.
-        if opts.ptr() == ValType::I64 {
-            tmp
-        } else {
-            self.instruction(LocalGet(tmp.idx));
-            self.instruction(I32WrapI64);
-            self.free_temp_local(tmp);
-            self.local_set_new_tmp(ValType::I32)
-        }
-    }
-
-    fn convert_src_len_to_dst(
-        &mut self,
-        src_len_local: u32,
-        src_ptr_ty: ValType,
-        dst_ptr_ty: ValType,
-    ) {
-        self.instruction(LocalGet(src_len_local));
-        match (src_ptr_ty, dst_ptr_ty) {
-            (ValType::I32, ValType::I64) => self.instruction(I64ExtendI32U),
-            (ValType::I64, ValType::I32) => self.instruction(I32WrapI64),
-            (src, dst) => assert_eq!(src, dst),
-        }
-    }
-
-    fn translate_record(
-        &mut self,
-        src_ty: TypeRecordIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty];
-        let dst_ty = match dst_ty {
-            InterfaceType::Record(r) => &self.types[*r],
-            _ => panic!("expected a record"),
-        };
-
-        // TODO: subtyping
-        assert_eq!(src_ty.fields.len(), dst_ty.fields.len());
-
-        // First a map is made of the source fields to where they're coming
-        // from (e.g. which offset or which locals). This map is keyed by the
-        // fields' names
-        let mut src_fields = HashMap::new();
-        for (i, src) in src
-            .record_field_srcs(self.types, src_ty.fields.iter().map(|f| f.ty))
-            .enumerate()
-        {
-            let field = &src_ty.fields[i];
-            src_fields.insert(&field.name, (src, &field.ty));
-        }
-
-        // .. and next translation is performed in the order of the destination
-        // fields in case the destination is the stack to ensure that the stack
-        // has the fields all in the right order.
-        //
-        // Note that the lookup in `src_fields` is an infallible lookup which
-        // will panic if the field isn't found.
-        //
-        // TODO: should that lookup be fallible with subtyping?
-        for (i, dst) in dst
-            .record_field_dsts(self.types, dst_ty.fields.iter().map(|f| f.ty))
-            .enumerate()
-        {
-            let field = &dst_ty.fields[i];
-            let (src, src_ty) = &src_fields[&field.name];
-            self.translate(src_ty, src, &field.ty, &dst);
-        }
-    }
-
-    fn translate_flags(
-        &mut self,
-        src_ty: TypeFlagsIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty];
-        let dst_ty = match dst_ty {
-            InterfaceType::Flags(r) => &self.types[*r],
-            _ => panic!("expected a record"),
-        };
-
-        // TODO: subtyping
-        //
-        // Notably this implementation does not support reordering flags from
-        // the source to the destination nor having more flags in the
-        // destination. Currently this is a copy from source to destination
-        // in-bulk. Otherwise reordering indices would have to have some sort of
-        // fancy bit twiddling tricks or something like that.
-        assert_eq!(src_ty.names, dst_ty.names);
-        let cnt = src_ty.names.len();
-        match FlagsSize::from_count(cnt) {
-            FlagsSize::Size0 => {}
-            FlagsSize::Size1 => {
-                let mask = if cnt == 8 { 0xff } else { (1 << cnt) - 1 };
-                self.convert_u8_mask(src, dst, mask);
-            }
-            FlagsSize::Size2 => {
-                let mask = if cnt == 16 { 0xffff } else { (1 << cnt) - 1 };
-                self.convert_u16_mask(src, dst, mask);
-            }
-            FlagsSize::Size4Plus(n) => {
-                let srcs = src.record_field_srcs(self.types, (0..n).map(|_| InterfaceType::U32));
-                let dsts = dst.record_field_dsts(self.types, (0..n).map(|_| InterfaceType::U32));
-                let n = usize::from(n);
-                for (i, (src, dst)) in srcs.zip(dsts).enumerate() {
-                    let mask = if i == n - 1 && (cnt % 32 != 0) {
-                        (1 << (cnt % 32)) - 1
-                    } else {
-                        0xffffffff
-                    };
-                    self.convert_u32_mask(&src, &dst, mask);
-                }
-            }
-        }
-    }
-
-    fn translate_tuple(
-        &mut self,
-        src_ty: TypeTupleIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty];
-        let dst_ty = match dst_ty {
-            InterfaceType::Tuple(t) => &self.types[*t],
-            _ => panic!("expected a tuple"),
-        };
-
-        // TODO: subtyping
-        assert_eq!(src_ty.types.len(), dst_ty.types.len());
-
-        let srcs = src
-            .record_field_srcs(self.types, src_ty.types.iter().copied())
-            .zip(src_ty.types.iter());
-        let dsts = dst
-            .record_field_dsts(self.types, dst_ty.types.iter().copied())
-            .zip(dst_ty.types.iter());
-        for ((src, src_ty), (dst, dst_ty)) in srcs.zip(dsts) {
-            self.translate(src_ty, &src, dst_ty, &dst);
-        }
-    }
-
-    fn translate_variant(
-        &mut self,
-        src_ty: TypeVariantIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty];
-        let dst_ty = match dst_ty {
-            InterfaceType::Variant(t) => &self.types[*t],
-            _ => panic!("expected a variant"),
-        };
-
-        let src_info = variant_info(self.types, src_ty.cases.iter().map(|(_, c)| c.as_ref()));
-        let dst_info = variant_info(self.types, dst_ty.cases.iter().map(|(_, c)| c.as_ref()));
-
-        let iter = src_ty
-            .cases
-            .iter()
-            .enumerate()
-            .map(|(src_i, (src_case, src_case_ty))| {
-                let dst_i = dst_ty
-                    .cases
-                    .iter()
-                    .position(|(c, _)| c == src_case)
-                    .unwrap();
-                let dst_case_ty = &dst_ty.cases[dst_i];
-                let src_i = u32::try_from(src_i).unwrap();
-                let dst_i = u32::try_from(dst_i).unwrap();
-                VariantCase {
-                    src_i,
-                    src_ty: src_case_ty.as_ref(),
-                    dst_i,
-                    dst_ty: dst_case_ty.as_ref(),
-                }
-            });
-        self.convert_variant(src, &src_info, dst, &dst_info, iter);
-    }
-
-    fn translate_enum(
-        &mut self,
-        src_ty: TypeEnumIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty];
-        let dst_ty = match dst_ty {
-            InterfaceType::Enum(t) => &self.types[*t],
-            _ => panic!("expected an option"),
-        };
-        let src_info = variant_info(self.types, src_ty.names.iter().map(|_| None));
-        let dst_info = variant_info(self.types, dst_ty.names.iter().map(|_| None));
-
-        self.convert_variant(
-            src,
-            &src_info,
-            dst,
-            &dst_info,
-            src_ty.names.iter().enumerate().map(|(src_i, src_name)| {
-                let dst_i = dst_ty.names.iter().position(|n| n == src_name).unwrap();
-                let src_i = u32::try_from(src_i).unwrap();
-                let dst_i = u32::try_from(dst_i).unwrap();
-                VariantCase {
-                    src_i,
-                    dst_i,
-                    src_ty: None,
-                    dst_ty: None,
-                }
-            }),
-        );
-    }
-
-    fn translate_option(
-        &mut self,
-        src_ty: TypeOptionIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty].ty;
-        let dst_ty = match dst_ty {
-            InterfaceType::Option(t) => &self.types[*t].ty,
-            _ => panic!("expected an option"),
-        };
-        let src_ty = Some(src_ty);
-        let dst_ty = Some(dst_ty);
-
-        let src_info = variant_info(self.types, [None, src_ty]);
-        let dst_info = variant_info(self.types, [None, dst_ty]);
-
-        self.convert_variant(
-            src,
-            &src_info,
-            dst,
-            &dst_info,
-            [
-                VariantCase {
-                    src_i: 0,
-                    dst_i: 0,
-                    src_ty: None,
-                    dst_ty: None,
-                },
-                VariantCase {
-                    src_i: 1,
-                    dst_i: 1,
-                    src_ty,
-                    dst_ty,
-                },
-            ]
-            .into_iter(),
-        );
-    }
-
-    fn translate_result(
-        &mut self,
-        src_ty: TypeResultIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let src_ty = &self.types[src_ty];
-        let dst_ty = match dst_ty {
-            InterfaceType::Result(t) => &self.types[*t],
-            _ => panic!("expected a result"),
-        };
-
-        let src_info = variant_info(self.types, [src_ty.ok.as_ref(), src_ty.err.as_ref()]);
-        let dst_info = variant_info(self.types, [dst_ty.ok.as_ref(), dst_ty.err.as_ref()]);
-
-        self.convert_variant(
-            src,
-            &src_info,
-            dst,
-            &dst_info,
-            [
-                VariantCase {
-                    src_i: 0,
-                    dst_i: 0,
-                    src_ty: src_ty.ok.as_ref(),
-                    dst_ty: dst_ty.ok.as_ref(),
-                },
-                VariantCase {
-                    src_i: 1,
-                    dst_i: 1,
-                    src_ty: src_ty.err.as_ref(),
-                    dst_ty: dst_ty.err.as_ref(),
-                },
-            ]
-            .into_iter(),
-        );
-    }
-
-    fn convert_variant<'a>(
-        &mut self,
-        src: &Source<'_>,
-        src_info: &VariantInfo,
-        dst: &Destination,
-        dst_info: &VariantInfo,
-        src_cases: impl ExactSizeIterator<Item = VariantCase<'a>>,
-    ) {
-        // The outermost block is special since it has the result type of the
-        // translation here. That will depend on the `dst`.
-        let outer_block_ty = match dst {
-            Destination::Stack(dst_flat, _) => match dst_flat.len() {
-                0 => BlockType::Empty,
-                1 => BlockType::Result(dst_flat[0]),
-                _ => {
-                    let ty = self.module.core_types.function(&[], &dst_flat);
-                    BlockType::FunctionType(ty)
-                }
-            },
-            Destination::Memory(_) => BlockType::Empty,
-        };
-        self.instruction(Block(outer_block_ty));
-
-        // After the outermost block generate a new block for each of the
-        // remaining cases.
-        let src_cases_len = src_cases.len();
-        for _ in 0..src_cases_len - 1 {
-            self.instruction(Block(BlockType::Empty));
-        }
-
-        // Generate a block for an invalid variant discriminant
-        self.instruction(Block(BlockType::Empty));
-
-        // And generate one final block that we'll be jumping out of with the
-        // `br_table`
-        self.instruction(Block(BlockType::Empty));
-
-        // Load the discriminant
-        match src {
-            Source::Stack(s) => self.stack_get(&s.slice(0..1), ValType::I32),
-            Source::Memory(mem) => match src_info.size {
-                DiscriminantSize::Size1 => self.i32_load8u(mem),
-                DiscriminantSize::Size2 => self.i32_load16u(mem),
-                DiscriminantSize::Size4 => self.i32_load(mem),
-            },
-        }
-
-        // Generate the `br_table` for the discriminant. Each case has an
-        // offset of 1 to skip the trapping block.
-        let mut targets = Vec::new();
-        for i in 0..src_cases_len {
-            targets.push((i + 1) as u32);
-        }
-        self.instruction(BrTable(targets[..].into(), 0));
-        self.instruction(End); // end the `br_table` block
-
-        self.trap(Trap::InvalidDiscriminant);
-        self.instruction(End); // end the "invalid discriminant" block
-
-        // Translate each case individually within its own block. Note that the
-        // iteration order here places the first case in the innermost block
-        // and the last case in the outermost block. This matches the order
-        // of the jump targets in the `br_table` instruction.
-        let src_cases_len = u32::try_from(src_cases_len).unwrap();
-        for case in src_cases {
-            let VariantCase {
-                src_i,
-                src_ty,
-                dst_i,
-                dst_ty,
-            } = case;
-
-            // Translate the discriminant here, noting that `dst_i` may be
-            // different than `src_i`.
-            self.push_dst_addr(dst);
-            self.instruction(I32Const(dst_i as i32));
-            match dst {
-                Destination::Stack(stack, _) => self.stack_set(&stack[..1], ValType::I32),
-                Destination::Memory(mem) => match dst_info.size {
-                    DiscriminantSize::Size1 => self.i32_store8(mem),
-                    DiscriminantSize::Size2 => self.i32_store16(mem),
-                    DiscriminantSize::Size4 => self.i32_store(mem),
-                },
-            }
-
-            let src_payload = src.payload_src(self.types, src_info, src_ty);
-            let dst_payload = dst.payload_dst(self.types, dst_info, dst_ty);
-
-            // Translate the payload of this case using the various types from
-            // the dst/src.
-            match (src_ty, dst_ty) {
-                (Some(src_ty), Some(dst_ty)) => {
-                    self.translate(src_ty, &src_payload, dst_ty, &dst_payload);
-                }
-                (None, None) => {}
-                _ => unimplemented!(),
-            }
-
-            // If the results of this translation were placed on the stack then
-            // the stack values may need to be padded with more zeros due to
-            // this particular case being possibly smaller than the entire
-            // variant. That's handled here by pushing remaining zeros after
-            // accounting for the discriminant pushed as well as the results of
-            // this individual payload.
-            if let Destination::Stack(payload_results, _) = dst_payload {
-                if let Destination::Stack(dst_results, _) = dst {
-                    let remaining = &dst_results[1..][payload_results.len()..];
-                    for ty in remaining {
-                        match ty {
-                            ValType::I32 => self.instruction(I32Const(0)),
-                            ValType::I64 => self.instruction(I64Const(0)),
-                            ValType::F32 => self.instruction(F32Const(0.0)),
-                            ValType::F64 => self.instruction(F64Const(0.0)),
-                            _ => unreachable!(),
-                        }
-                    }
-                }
-            }
-
-            // Branch to the outermost block. Note that this isn't needed for
-            // the outermost case since it simply falls through.
-            if src_i != src_cases_len - 1 {
-                self.instruction(Br(src_cases_len - src_i - 1));
-            }
-            self.instruction(End); // end this case's block
-        }
-    }
-
-    fn translate_own(
-        &mut self,
-        src_ty: TypeResourceTableIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let dst_ty = match dst_ty {
-            InterfaceType::Own(t) => *t,
-            _ => panic!("expected an `Own`"),
-        };
-        let transfer = self.module.import_resource_transfer_own();
-        self.translate_resource(src_ty, src, dst_ty, dst, transfer);
-    }
-
-    fn translate_borrow(
-        &mut self,
-        src_ty: TypeResourceTableIndex,
-        src: &Source<'_>,
-        dst_ty: &InterfaceType,
-        dst: &Destination,
-    ) {
-        let dst_ty = match dst_ty {
-            InterfaceType::Borrow(t) => *t,
-            _ => panic!("expected an `Borrow`"),
-        };
-
-        let transfer = self.module.import_resource_transfer_borrow();
-        self.translate_resource(src_ty, src, dst_ty, dst, transfer);
-    }
-
-    /// Translates the index `src`, which resides in the table `src_ty`, into
-    /// and index within `dst_ty` and is stored at `dst`.
-    ///
-    /// Actual translation of the index happens in a wasmtime libcall, which a
-    /// cranelift-generated trampoline to satisfy this import will call. The
-    /// `transfer` function is an imported function which takes the src, src_ty,
-    /// and dst_ty, and returns the dst index.
-    fn translate_resource(
-        &mut self,
-        src_ty: TypeResourceTableIndex,
-        src: &Source<'_>,
-        dst_ty: TypeResourceTableIndex,
-        dst: &Destination,
-        transfer: FuncIndex,
-    ) {
-        self.push_dst_addr(dst);
-        match src {
-            Source::Memory(mem) => self.i32_load(mem),
-            Source::Stack(stack) => self.stack_get(stack, ValType::I32),
-        }
-        self.instruction(I32Const(src_ty.as_u32() as i32));
-        self.instruction(I32Const(dst_ty.as_u32() as i32));
-        self.instruction(Call(transfer.as_u32()));
-        match dst {
-            Destination::Memory(mem) => self.i32_store(mem),
-            Destination::Stack(stack, _) => self.stack_set(stack, ValType::I32),
-        }
-    }
-
-    fn trap_if_not_flag(&mut self, flags_global: GlobalIndex, flag_to_test: i32, trap: Trap) {
-        self.instruction(GlobalGet(flags_global.as_u32()));
-        self.instruction(I32Const(flag_to_test));
-        self.instruction(I32And);
-        self.instruction(I32Eqz);
-        self.instruction(If(BlockType::Empty));
-        self.trap(trap);
-        self.instruction(End);
-    }
-
-    fn assert_not_flag(&mut self, flags_global: GlobalIndex, flag_to_test: i32, msg: &'static str) {
-        self.instruction(GlobalGet(flags_global.as_u32()));
-        self.instruction(I32Const(flag_to_test));
-        self.instruction(I32And);
-        self.instruction(If(BlockType::Empty));
-        self.trap(Trap::AssertFailed(msg));
-        self.instruction(End);
-    }
-
-    fn set_flag(&mut self, flags_global: GlobalIndex, flag_to_set: i32, value: bool) {
-        self.instruction(GlobalGet(flags_global.as_u32()));
-        if value {
-            self.instruction(I32Const(flag_to_set));
-            self.instruction(I32Or);
-        } else {
-            self.instruction(I32Const(!flag_to_set));
-            self.instruction(I32And);
-        }
-        self.instruction(GlobalSet(flags_global.as_u32()));
-    }
-
-    fn verify_aligned(&mut self, opts: &Options, addr_local: u32, align: u32) {
-        // If the alignment is 1 then everything is trivially aligned and the
-        // check can be omitted.
-        if align == 1 {
-            return;
-        }
-        self.instruction(LocalGet(addr_local));
-        assert!(align.is_power_of_two());
-        self.ptr_uconst(opts, align - 1);
-        self.ptr_and(opts);
-        self.ptr_if(opts, BlockType::Empty);
-        self.trap(Trap::UnalignedPointer);
-        self.instruction(End);
-    }
-
-    fn assert_aligned(&mut self, ty: &InterfaceType, mem: &Memory) {
-        if !self.module.debug {
-            return;
-        }
-        let align = self.types.align(mem.opts, ty);
-        if align == 1 {
-            return;
-        }
-        assert!(align.is_power_of_two());
-        self.instruction(LocalGet(mem.addr.idx));
-        self.ptr_uconst(mem.opts, mem.offset);
-        self.ptr_add(mem.opts);
-        self.ptr_uconst(mem.opts, align - 1);
-        self.ptr_and(mem.opts);
-        self.ptr_if(mem.opts, BlockType::Empty);
-        self.trap(Trap::AssertFailed("pointer not aligned"));
-        self.instruction(End);
-    }
-
-    fn malloc<'a>(&mut self, opts: &'a Options, size: MallocSize, align: u32) -> Memory<'a> {
-        let realloc = opts.realloc.unwrap();
-        self.ptr_uconst(opts, 0);
-        self.ptr_uconst(opts, 0);
-        self.ptr_uconst(opts, align);
-        match size {
-            MallocSize::Const(size) => self.ptr_uconst(opts, size),
-            MallocSize::Local(idx) => self.instruction(LocalGet(idx)),
-        }
-        self.instruction(Call(realloc.as_u32()));
-        let addr = self.local_set_new_tmp(opts.ptr());
-        self.memory_operand(opts, addr, align)
-    }
-
-    fn memory_operand<'a>(&mut self, opts: &'a Options, addr: TempLocal, align: u32) -> Memory<'a> {
-        let ret = Memory {
-            addr,
-            offset: 0,
-            opts,
-        };
-        self.verify_aligned(opts, ret.addr.idx, align);
-        ret
-    }
-
-    /// Generates a new local in this function of the `ty` specified,
-    /// initializing it with the top value on the current wasm stack.
-    ///
-    /// The returned `TempLocal` must be freed after it is finished with
-    /// `free_temp_local`.
-    fn local_tee_new_tmp(&mut self, ty: ValType) -> TempLocal {
-        self.gen_temp_local(ty, LocalTee)
-    }
-
-    /// Same as `local_tee_new_tmp` but initializes the local with `LocalSet`
-    /// instead of `LocalTee`.
-    fn local_set_new_tmp(&mut self, ty: ValType) -> TempLocal {
-        self.gen_temp_local(ty, LocalSet)
-    }
-
-    fn gen_temp_local(&mut self, ty: ValType, insn: fn(u32) -> Instruction<'static>) -> TempLocal {
-        // First check to see if any locals are available in this function which
-        // were previously generated but are no longer in use.
-        if let Some(idx) = self.free_locals.get_mut(&ty).and_then(|v| v.pop()) {
-            self.instruction(insn(idx));
-            return TempLocal {
-                ty,
-                idx,
-                needs_free: true,
-            };
-        }
-
-        // Failing that generate a fresh new local.
-        let locals = &mut self.module.funcs[self.result].locals;
-        match locals.last_mut() {
-            Some((cnt, prev_ty)) if ty == *prev_ty => *cnt += 1,
-            _ => locals.push((1, ty)),
-        }
-        self.nlocals += 1;
-        let idx = self.nlocals - 1;
-        self.instruction(insn(idx));
-        TempLocal {
-            ty,
-            idx,
-            needs_free: true,
-        }
-    }
-
-    /// Used to release a `TempLocal` from a particular lexical scope to allow
-    /// its possible reuse in later scopes.
-    fn free_temp_local(&mut self, mut local: TempLocal) {
-        assert!(local.needs_free);
-        self.free_locals
-            .entry(local.ty)
-            .or_insert(Vec::new())
-            .push(local.idx);
-        local.needs_free = false;
-    }
-
-    fn instruction(&mut self, instr: Instruction) {
-        instr.encode(&mut self.code);
-    }
-
-    fn trap(&mut self, trap: Trap) {
-        self.traps.push((self.code.len(), trap));
-        self.instruction(Unreachable);
-    }
-
-    /// Flushes out the current `code` instructions (and `traps` if there are
-    /// any) into the destination function.
-    ///
-    /// This is a noop if no instructions have been encoded yet.
-    fn flush_code(&mut self) {
-        if self.code.is_empty() {
-            return;
-        }
-        self.module.funcs[self.result].body.push(Body::Raw(
-            mem::take(&mut self.code),
-            mem::take(&mut self.traps),
-        ));
-    }
-
-    fn finish(mut self) {
-        // Append the final `end` instruction which all functions require, and
-        // then empty out the temporary buffer in `Compiler`.
-        self.instruction(End);
-        self.flush_code();
-
-        // Flag the function as "done" which helps with an assert later on in
-        // emission that everything was eventually finished.
-        self.module.funcs[self.result].filled_in = true;
-    }
-
-    /// Fetches the value contained with the local specified by `stack` and
-    /// converts it to `dst_ty`.
-    ///
-    /// This is only intended for use in primitive operations where `stack` is
-    /// guaranteed to have only one local. The type of the local on the stack is
-    /// then converted to `dst_ty` appropriately. Note that the types may be
-    /// different due to the "flattening" of variant types.
-    fn stack_get(&mut self, stack: &Stack<'_>, dst_ty: ValType) {
-        assert_eq!(stack.locals.len(), 1);
-        let (idx, src_ty) = stack.locals[0];
-        self.instruction(LocalGet(idx));
-        match (src_ty, dst_ty) {
-            (ValType::I32, ValType::I32)
-            | (ValType::I64, ValType::I64)
-            | (ValType::F32, ValType::F32)
-            | (ValType::F64, ValType::F64) => {}
-
-            (ValType::I32, ValType::F32) => self.instruction(F32ReinterpretI32),
-            (ValType::I64, ValType::I32) => {
-                self.assert_i64_upper_bits_not_set(idx);
-                self.instruction(I32WrapI64);
-            }
-            (ValType::I64, ValType::F64) => self.instruction(F64ReinterpretI64),
-            (ValType::I64, ValType::F32) => {
-                self.assert_i64_upper_bits_not_set(idx);
-                self.instruction(I32WrapI64);
-                self.instruction(F32ReinterpretI32);
-            }
-
-            // should not be possible given the `join` function for variants
-            (ValType::I32, ValType::I64)
-            | (ValType::I32, ValType::F64)
-            | (ValType::F32, ValType::I32)
-            | (ValType::F32, ValType::I64)
-            | (ValType::F32, ValType::F64)
-            | (ValType::F64, ValType::I32)
-            | (ValType::F64, ValType::I64)
-            | (ValType::F64, ValType::F32)
-
-            // not used in the component model
-            | (ValType::Ref(_), _)
-            | (_, ValType::Ref(_))
-            | (ValType::V128, _)
-            | (_, ValType::V128) => {
-                panic!("cannot get {dst_ty:?} from {src_ty:?} local");
-            }
-        }
-    }
-
-    fn assert_i64_upper_bits_not_set(&mut self, local: u32) {
-        if !self.module.debug {
-            return;
-        }
-        self.instruction(LocalGet(local));
-        self.instruction(I64Const(32));
-        self.instruction(I64ShrU);
-        self.instruction(I32WrapI64);
-        self.instruction(If(BlockType::Empty));
-        self.trap(Trap::AssertFailed("upper bits are unexpectedly set"));
-        self.instruction(End);
-    }
-
-    /// Converts the top value on the WebAssembly stack which has type
-    /// `src_ty` to `dst_tys[0]`.
-    ///
-    /// This is only intended for conversion of primitives where the `dst_tys`
-    /// list is known to be of length 1.
-    fn stack_set(&mut self, dst_tys: &[ValType], src_ty: ValType) {
-        assert_eq!(dst_tys.len(), 1);
-        let dst_ty = dst_tys[0];
-        match (src_ty, dst_ty) {
-            (ValType::I32, ValType::I32)
-            | (ValType::I64, ValType::I64)
-            | (ValType::F32, ValType::F32)
-            | (ValType::F64, ValType::F64) => {}
-
-            (ValType::F32, ValType::I32) => self.instruction(I32ReinterpretF32),
-            (ValType::I32, ValType::I64) => self.instruction(I64ExtendI32U),
-            (ValType::F64, ValType::I64) => self.instruction(I64ReinterpretF64),
-            (ValType::F32, ValType::I64) => {
-                self.instruction(I32ReinterpretF32);
-                self.instruction(I64ExtendI32U);
-            }
-
-            // should not be possible given the `join` function for variants
-            (ValType::I64, ValType::I32)
-            | (ValType::F64, ValType::I32)
-            | (ValType::I32, ValType::F32)
-            | (ValType::I64, ValType::F32)
-            | (ValType::F64, ValType::F32)
-            | (ValType::I32, ValType::F64)
-            | (ValType::I64, ValType::F64)
-            | (ValType::F32, ValType::F64)
-
-            // not used in the component model
-            | (ValType::Ref(_), _)
-            | (_, ValType::Ref(_))
-            | (ValType::V128, _)
-            | (_, ValType::V128) => {
-                panic!("cannot get {dst_ty:?} from {src_ty:?} local");
-            }
-        }
-    }
-
-    fn i32_load8u(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(I32Load8U(mem.memarg(0)));
-    }
-
-    fn i32_load8s(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(I32Load8S(mem.memarg(0)));
-    }
-
-    fn i32_load16u(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(I32Load16U(mem.memarg(1)));
-    }
-
-    fn i32_load16s(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(I32Load16S(mem.memarg(1)));
-    }
-
-    fn i32_load(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(I32Load(mem.memarg(2)));
-    }
-
-    fn i64_load(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(I64Load(mem.memarg(3)));
-    }
-
-    fn ptr_load(&mut self, mem: &Memory) {
-        if mem.opts.memory64 {
-            self.i64_load(mem);
-        } else {
-            self.i32_load(mem);
-        }
-    }
-
-    fn ptr_add(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Add);
-        } else {
-            self.instruction(I32Add);
-        }
-    }
-
-    fn ptr_sub(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Sub);
-        } else {
-            self.instruction(I32Sub);
-        }
-    }
-
-    fn ptr_mul(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Mul);
-        } else {
-            self.instruction(I32Mul);
-        }
-    }
-
-    fn ptr_ge_u(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64GeU);
-        } else {
-            self.instruction(I32GeU);
-        }
-    }
-
-    fn ptr_lt_u(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64LtU);
-        } else {
-            self.instruction(I32LtU);
-        }
-    }
-
-    fn ptr_shl(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Shl);
-        } else {
-            self.instruction(I32Shl);
-        }
-    }
-
-    fn ptr_eqz(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Eqz);
-        } else {
-            self.instruction(I32Eqz);
-        }
-    }
-
-    fn ptr_uconst(&mut self, opts: &Options, val: u32) {
-        if opts.memory64 {
-            self.instruction(I64Const(val.into()));
-        } else {
-            self.instruction(I32Const(val as i32));
-        }
-    }
-
-    fn ptr_iconst(&mut self, opts: &Options, val: i32) {
-        if opts.memory64 {
-            self.instruction(I64Const(val.into()));
-        } else {
-            self.instruction(I32Const(val));
-        }
-    }
-
-    fn ptr_eq(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Eq);
-        } else {
-            self.instruction(I32Eq);
-        }
-    }
-
-    fn ptr_ne(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Ne);
-        } else {
-            self.instruction(I32Ne);
-        }
-    }
-
-    fn ptr_and(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64And);
-        } else {
-            self.instruction(I32And);
-        }
-    }
-
-    fn ptr_or(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Or);
-        } else {
-            self.instruction(I32Or);
-        }
-    }
-
-    fn ptr_xor(&mut self, opts: &Options) {
-        if opts.memory64 {
-            self.instruction(I64Xor);
-        } else {
-            self.instruction(I32Xor);
-        }
-    }
-
-    fn ptr_if(&mut self, opts: &Options, ty: BlockType) {
-        if opts.memory64 {
-            self.instruction(I64Const(0));
-            self.instruction(I64Ne);
-        }
-        self.instruction(If(ty));
-    }
-
-    fn ptr_br_if(&mut self, opts: &Options, depth: u32) {
-        if opts.memory64 {
-            self.instruction(I64Const(0));
-            self.instruction(I64Ne);
-        }
-        self.instruction(BrIf(depth));
-    }
-
-    fn f32_load(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(F32Load(mem.memarg(2)));
-    }
-
-    fn f64_load(&mut self, mem: &Memory) {
-        self.instruction(LocalGet(mem.addr.idx));
-        self.instruction(F64Load(mem.memarg(3)));
-    }
-
-    fn push_dst_addr(&mut self, dst: &Destination) {
-        if let Destination::Memory(mem) = dst {
-            self.instruction(LocalGet(mem.addr.idx));
-        }
-    }
-
-    fn i32_store8(&mut self, mem: &Memory) {
-        self.instruction(I32Store8(mem.memarg(0)));
-    }
-
-    fn i32_store16(&mut self, mem: &Memory) {
-        self.instruction(I32Store16(mem.memarg(1)));
-    }
-
-    fn i32_store(&mut self, mem: &Memory) {
-        self.instruction(I32Store(mem.memarg(2)));
-    }
-
-    fn i64_store(&mut self, mem: &Memory) {
-        self.instruction(I64Store(mem.memarg(3)));
-    }
-
-    fn ptr_store(&mut self, mem: &Memory) {
-        if mem.opts.memory64 {
-            self.i64_store(mem);
-        } else {
-            self.i32_store(mem);
-        }
-    }
-
-    fn f32_store(&mut self, mem: &Memory) {
-        self.instruction(F32Store(mem.memarg(2)));
-    }
-
-    fn f64_store(&mut self, mem: &Memory) {
-        self.instruction(F64Store(mem.memarg(3)));
-    }
-}
-
-impl<'a> Source<'a> {
-    /// Given this `Source` returns an iterator over the `Source` for each of
-    /// the component `fields` specified.
-    ///
-    /// This will automatically slice stack-based locals to the appropriate
-    /// width for each component type and additionally calculate the appropriate
-    /// offset for each memory-based type.
-    fn record_field_srcs<'b>(
-        &'b self,
-        types: &'b ComponentTypesBuilder,
-        fields: impl IntoIterator<Item = InterfaceType> + 'b,
-    ) -> impl Iterator<Item = Source<'a>> + 'b
-    where
-        'a: 'b,
-    {
-        let mut offset = 0;
-        fields.into_iter().map(move |ty| match self {
-            Source::Memory(mem) => {
-                let mem = next_field_offset(&mut offset, types, &ty, mem);
-                Source::Memory(mem)
-            }
-            Source::Stack(stack) => {
-                let cnt = types.flat_types(&ty).unwrap().len() as u32;
-                offset += cnt;
-                Source::Stack(stack.slice((offset - cnt) as usize..offset as usize))
-            }
-        })
-    }
-
-    /// Returns the corresponding discriminant source and payload source f
-    fn payload_src(
-        &self,
-        types: &ComponentTypesBuilder,
-        info: &VariantInfo,
-        case: Option<&InterfaceType>,
-    ) -> Source<'a> {
-        match self {
-            Source::Stack(s) => {
-                let flat_len = match case {
-                    Some(case) => types.flat_types(case).unwrap().len(),
-                    None => 0,
-                };
-                Source::Stack(s.slice(1..s.locals.len()).slice(0..flat_len))
-            }
-            Source::Memory(mem) => {
-                let mem = if mem.opts.memory64 {
-                    mem.bump(info.payload_offset64)
-                } else {
-                    mem.bump(info.payload_offset32)
-                };
-                Source::Memory(mem)
-            }
-        }
-    }
-
-    fn opts(&self) -> &'a Options {
-        match self {
-            Source::Stack(s) => s.opts,
-            Source::Memory(mem) => mem.opts,
-        }
-    }
-}
-
-impl<'a> Destination<'a> {
-    /// Same as `Source::record_field_srcs` but for destinations.
-    fn record_field_dsts<'b>(
-        &'b self,
-        types: &'b ComponentTypesBuilder,
-        fields: impl IntoIterator<Item = InterfaceType> + 'b,
-    ) -> impl Iterator<Item = Destination> + 'b
-    where
-        'a: 'b,
-    {
-        let mut offset = 0;
-        fields.into_iter().map(move |ty| match self {
-            Destination::Memory(mem) => {
-                let mem = next_field_offset(&mut offset, types, &ty, mem);
-                Destination::Memory(mem)
-            }
-            Destination::Stack(s, opts) => {
-                let cnt = types.flat_types(&ty).unwrap().len() as u32;
-                offset += cnt;
-                Destination::Stack(&s[(offset - cnt) as usize..offset as usize], opts)
-            }
-        })
-    }
-
-    /// Returns the corresponding discriminant source and payload source f
-    fn payload_dst(
-        &self,
-        types: &ComponentTypesBuilder,
-        info: &VariantInfo,
-        case: Option<&InterfaceType>,
-    ) -> Destination {
-        match self {
-            Destination::Stack(s, opts) => {
-                let flat_len = match case {
-                    Some(case) => types.flat_types(case).unwrap().len(),
-                    None => 0,
-                };
-                Destination::Stack(&s[1..][..flat_len], opts)
-            }
-            Destination::Memory(mem) => {
-                let mem = if mem.opts.memory64 {
-                    mem.bump(info.payload_offset64)
-                } else {
-                    mem.bump(info.payload_offset32)
-                };
-                Destination::Memory(mem)
-            }
-        }
-    }
-
-    fn opts(&self) -> &'a Options {
-        match self {
-            Destination::Stack(_, opts) => opts,
-            Destination::Memory(mem) => mem.opts,
-        }
-    }
-}
-
-fn next_field_offset<'a>(
-    offset: &mut u32,
-    types: &ComponentTypesBuilder,
-    field: &InterfaceType,
-    mem: &Memory<'a>,
-) -> Memory<'a> {
-    let abi = types.canonical_abi(field);
-    let offset = if mem.opts.memory64 {
-        abi.next_field64(offset)
-    } else {
-        abi.next_field32(offset)
-    };
-    mem.bump(offset)
-}
-
-impl<'a> Memory<'a> {
-    fn memarg(&self, align: u32) -> MemArg {
-        MemArg {
-            offset: u64::from(self.offset),
-            align,
-            memory_index: self.opts.memory.unwrap().as_u32(),
-        }
-    }
-
-    fn bump(&self, offset: u32) -> Memory<'a> {
-        Memory {
-            opts: self.opts,
-            addr: TempLocal::new(self.addr.idx, self.addr.ty),
-            offset: self.offset + offset,
-        }
-    }
-}
-
-impl<'a> Stack<'a> {
-    fn slice(&self, range: Range<usize>) -> Stack<'a> {
-        Stack {
-            locals: &self.locals[range],
-            opts: self.opts,
-        }
-    }
-}
-
-struct VariantCase<'a> {
-    src_i: u32,
-    src_ty: Option<&'a InterfaceType>,
-    dst_i: u32,
-    dst_ty: Option<&'a InterfaceType>,
-}
-
-fn variant_info<'a, I>(types: &ComponentTypesBuilder, cases: I) -> VariantInfo
-where
-    I: IntoIterator<Item = Option<&'a InterfaceType>>,
-    I::IntoIter: ExactSizeIterator,
-{
-    VariantInfo::new(
-        cases
-            .into_iter()
-            .map(|ty| ty.map(|ty| types.canonical_abi(ty))),
-    )
-    .0
-}
-
-enum MallocSize {
-    Const(u32),
-    Local(u32),
-}
-
-struct WasmString<'a> {
-    ptr: TempLocal,
-    len: TempLocal,
-    opts: &'a Options,
-}
-
-struct TempLocal {
-    idx: u32,
-    ty: ValType,
-    needs_free: bool,
-}
-
-impl TempLocal {
-    fn new(idx: u32, ty: ValType) -> TempLocal {
-        TempLocal {
-            idx,
-            ty,
-            needs_free: false,
-        }
-    }
-}
-
-impl std::ops::Drop for TempLocal {
-    fn drop(&mut self) {
-        if self.needs_free {
-            panic!("temporary local not free'd");
-        }
-    }
-}
-
-impl From<FlatType> for ValType {
-    fn from(ty: FlatType) -> ValType {
-        match ty {
-            FlatType::I32 => ValType::I32,
-            FlatType::I64 => ValType::I64,
-            FlatType::F32 => ValType::F32,
-            FlatType::F64 => ValType::F64,
-        }
-    }
-}