wasmtime 24.0.0 → 25.0.0

data/ext/cargo-vendor/cranelift-codegen-0.111.0/src/isa/x64/lower.isle

@@ -1,4892 +0,0 @@
-;; x86-64 instruction selection and CLIF-to-MachInst lowering.
-
-;; The main lowering constructor term: takes a clif `Inst` and returns the
-;; register(s) within which the lowered instruction's result values live.
-(decl partial lower (Inst) InstOutput)
-
-;; A variant of the main lowering constructor term, used for branches.
-;; The only difference is that it gets an extra argument holding a vector
-;; of branch targets to be used.
-(decl partial lower_branch (Inst MachLabelSlice) Unit)
-
-;;;; Rules for `iconst` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-(rule (lower (has_type (fits_in_64 ty)
-                       (iconst (u64_from_imm64 x))))
-      (imm ty x))
-
-;; `i128`
-(rule 1 (lower (has_type $I128
-                       (iconst (u64_from_imm64 x))))
-      (value_regs (imm $I64 x)
-                  (imm $I64 0)))
-
-;;;; Rules for `f16const` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (f16const (u16_from_ieee16 x)))
-      (imm $F16 x))
-
-;;;; Rules for `f32const` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (f32const (u32_from_ieee32 x)))
-      (imm $F32 x))
-
-;;;; Rules for `f64const` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (f64const (u64_from_ieee64 x)))
-      (imm $F64 x))
-
-;;;; Rules for `f128const` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-(rule (lower (f128const const))
-      ;; TODO use Inst::gen_constant() instead.
-      (x64_xmm_load_const $F128 (const_to_vconst const)))
-
-(rule 1 (lower (f128const (u128_from_constant 0)))
-      (xmm_zero $F128))
-
-;;;; Rules for `null` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type ty (null)))
-      (imm ty 0))
-
-;;;; Rules for `iadd` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-;; Base case for 8 and 16-bit types
-(rule -6 (lower (has_type (fits_in_16 ty)
-                       (iadd x y)))
-      (x64_add ty x y))
-
-;; Base case for 32 and 64-bit types which might end up using the `lea`
-;; instruction to fold multiple operations into one.
-;;
-;; Note that at this time this always generates a `lea` pseudo-instruction,
-;; but the actual instruction emitted might be an `add` if it's equivalent.
-;; For more details on this see the `emit.rs` logic to emit
-;; `LoadEffectiveAddress`.
-(rule -5 (lower (has_type (ty_32_or_64 ty) (iadd x y)))
-      (x64_lea ty (to_amode_add (mem_flags_trusted) x y (zero_offset))))
-
-;; Higher-priority cases than the previous two where a load can be sunk into
-;; the add instruction itself. Note that both operands are tested for
-;; sink-ability since addition is commutative
-(rule -4 (lower (has_type (fits_in_64 ty)
-                       (iadd x (sinkable_load y))))
-      (x64_add ty x y))
-(rule -3 (lower (has_type (fits_in_64 ty)
-                       (iadd (sinkable_load x) y)))
-      (x64_add ty y x))
-
-;; SSE.
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (iadd x y)))
-      (x64_paddb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (iadd x y)))
-      (x64_paddw x y))
-
-(rule (lower (has_type (multi_lane 32 4)
-                       (iadd x y)))
-      (x64_paddd x y))
-
-(rule (lower (has_type (multi_lane 64 2)
-                       (iadd x y)))
-      (x64_paddq x y))
-
-;; `i128`
-(rule 1 (lower (has_type $I128 (iadd x y)))
-      ;; Get the high/low registers for `x`.
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1)))
-        ;; Get the high/low registers for `y`.
-        (let ((y_regs ValueRegs y)
-              (y_lo Gpr (value_regs_get_gpr y_regs 0))
-              (y_hi Gpr (value_regs_get_gpr y_regs 1)))
-          ;; Do an add followed by an add-with-carry.
-          (with_flags (x64_add_with_flags_paired $I64 x_lo y_lo)
-                      (x64_adc_paired $I64 x_hi y_hi)))))
-
-;;;; Helpers for `*_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(decl construct_overflow_op (CC ProducesFlags) InstOutput)
-(rule (construct_overflow_op cc inst)
-      (let ((results ValueRegs (with_flags inst
-                                           (x64_setcc_paired cc))))
-        (output_pair (value_regs_get results 0)
-                     (value_regs_get results 1))))
-
-(decl construct_overflow_op_alu (Type CC AluRmiROpcode Gpr GprMemImm) InstOutput)
-(rule (construct_overflow_op_alu ty cc alu_op src1 src2)
-      (construct_overflow_op cc (x64_alurmi_with_flags_paired alu_op ty src1 src2)))
-
-;; This essentially creates
-;; alu_<op1> x_lo, y_lo
-;; alu_<op2> x_hi, y_hi
-;; set<cc> r8
-(decl construct_overflow_op_alu_128 (CC AluRmiROpcode AluRmiROpcode Value Value) InstOutput)
-(rule (construct_overflow_op_alu_128 cc op1 op2 x y)
-      ;; Get the high/low registers for `x`.
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1)))
-        ;; Get the high/low registers for `y`.
-        (let ((y_regs ValueRegs y)
-              (y_lo Gpr (value_regs_get_gpr y_regs 0))
-              (y_hi Gpr (value_regs_get_gpr y_regs 1)))
-          (let    ((lo_inst ProducesFlags (x64_alurmi_with_flags_paired op1 $I64 x_lo y_lo))
-                   (hi_inst ConsumesAndProducesFlags (x64_alurmi_with_flags_chained op2 $I64 x_hi y_hi))
-                   (of_inst ConsumesFlags (x64_setcc_paired cc))
-
-                   (result MultiReg (with_flags_chained lo_inst hi_inst of_inst)))
-                  (multi_reg_to_pair_and_single result)))))
-
-;;;; Rules for `uadd_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (uadd_overflow x y @ (value_type (fits_in_64 ty))))
-      (construct_overflow_op_alu ty (CC.B) (AluRmiROpcode.Add) x y))
-
-;; i128 gets lowered into adc and add
-(rule 0 (lower (uadd_overflow x y @ (value_type $I128)))
-        (construct_overflow_op_alu_128 (CC.B) (AluRmiROpcode.Add) (AluRmiROpcode.Adc) x y))
-
-;;;; Rules for `sadd_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (sadd_overflow x y @ (value_type (fits_in_64 ty))))
-      (construct_overflow_op_alu ty (CC.O) (AluRmiROpcode.Add) x y))
-
-(rule 0 (lower (sadd_overflow x y @ (value_type $I128)))
-        (construct_overflow_op_alu_128 (CC.O) (AluRmiROpcode.Add) (AluRmiROpcode.Adc) x y))
-
-;;;; Rules for `usub_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (usub_overflow x y @ (value_type (fits_in_64 ty))))
-      (construct_overflow_op_alu ty (CC.B) (AluRmiROpcode.Sub) x y))
-
-(rule 0 (lower (usub_overflow x y @ (value_type $I128)))
-        (construct_overflow_op_alu_128 (CC.B) (AluRmiROpcode.Sub) (AluRmiROpcode.Sbb) x y))
-
-;;;; Rules for `ssub_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (ssub_overflow x y @ (value_type (fits_in_64 ty))))
-      (construct_overflow_op_alu ty (CC.O) (AluRmiROpcode.Sub) x y))
-
-(rule 0 (lower (ssub_overflow x y @ (value_type $I128)))
-        (construct_overflow_op_alu_128 (CC.O) (AluRmiROpcode.Sub) (AluRmiROpcode.Sbb) x y))
-
-;;;; Rules for `umul_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 2 (lower (umul_overflow x y @ (value_type $I8)))
-      (construct_overflow_op (CC.O) (x64_mul8_with_flags_paired $false x y)))
-
-(rule 3 (lower (umul_overflow x y @ (value_type (ty_int_ref_16_to_64 ty))))
-      (construct_overflow_op (CC.O) (x64_mul_lo_with_flags_paired ty $false x y)))
-
-;;;; Rules for `smul_overflow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 2 (lower (smul_overflow x y @ (value_type $I8)))
-      (construct_overflow_op (CC.O) (x64_mul8_with_flags_paired $true x y)))
-
-(rule 3 (lower (smul_overflow x y @ (value_type (ty_int_ref_16_to_64 ty))))
-      (construct_overflow_op (CC.O) (x64_mul_lo_with_flags_paired ty $true x y)))
-
-;;;; Rules for `sadd_sat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (sadd_sat x y)))
-      (x64_paddsb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (sadd_sat x y)))
-      (x64_paddsw x y))
-
-;;;; Rules for `uadd_sat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (uadd_sat x y)))
-      (x64_paddusb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (uadd_sat x y)))
-      (x64_paddusw x y))
-
-;;;; Rules for `isub` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-;; Sub two registers.
-(rule -3 (lower (has_type (fits_in_64 ty)
-                       (isub x y)))
-      (x64_sub ty x y))
-
-;; SSE.
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (isub x y)))
-      (x64_psubb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (isub x y)))
-      (x64_psubw x y))
-
-(rule (lower (has_type (multi_lane 32 4)
-                       (isub x y)))
-      (x64_psubd x y))
-
-(rule (lower (has_type (multi_lane 64 2)
-                       (isub x y)))
-      (x64_psubq x y))
-
-;; `i128`
-(rule 1 (lower (has_type $I128 (isub x y)))
-      ;; Get the high/low registers for `x`.
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1)))
-        ;; Get the high/low registers for `y`.
-        (let ((y_regs ValueRegs y)
-              (y_lo Gpr (value_regs_get_gpr y_regs 0))
-              (y_hi Gpr (value_regs_get_gpr y_regs 1)))
-          ;; Do a sub followed by an sub-with-borrow.
-          (with_flags (x64_sub_with_flags_paired $I64 x_lo y_lo)
-                      (x64_sbb_paired $I64 x_hi y_hi)))))
-
-;;;; Rules for `ssub_sat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (ssub_sat x y)))
-      (x64_psubsb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (ssub_sat x y)))
-      (x64_psubsw x y))
-
-;;;; Rules for `usub_sat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (usub_sat x y)))
-      (x64_psubusb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (usub_sat x y)))
-      (x64_psubusw x y))
-
-;;;; Rules for `band` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `{i,b}64` and smaller.
-
-;; And two registers.
-(rule 0 (lower (has_type ty (band x y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_and ty x y))
-
-;; The above case automatically handles when the rhs is an immediate or a
-;; sinkable load, but additionally handle the lhs here.
-
-(rule 1 (lower (has_type ty (band (sinkable_load x) y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_and ty y x))
-
-(rule 2 (lower (has_type ty (band (simm32_from_value x) y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_and ty y x))
-
-;; f32 and f64
-
-(rule 5 (lower (has_type (ty_scalar_float ty) (band x y)))
-      (sse_and ty x y))
-
-;; SSE.
-
-(decl sse_and (Type Xmm XmmMem) Xmm)
-(rule (sse_and $F32X4 x y) (x64_andps x y))
-(rule (sse_and $F64X2 x y) (x64_andpd x y))
-(rule (sse_and $F32 x y) (x64_andps x y))
-(rule (sse_and $F64 x y) (x64_andpd x y))
-(rule -1 (sse_and (multi_lane _bits _lanes) x y) (x64_pand x y))
-
-(rule 6 (lower (has_type ty @ (multi_lane _bits _lanes)
-                       (band x y)))
-      (sse_and ty x y))
-
-;; `i128`.
-
-(decl and_i128 (ValueRegs ValueRegs) ValueRegs)
-(rule (and_i128 x y)
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1))
-            (y_regs ValueRegs y)
-            (y_lo Gpr (value_regs_get_gpr y_regs 0))
-            (y_hi Gpr (value_regs_get_gpr y_regs 1)))
-        (value_gprs (x64_and $I64 x_lo y_lo)
-                    (x64_and $I64 x_hi y_hi))))
-
-(rule 7 (lower (has_type $I128 (band x y)))
-      (and_i128 x y))
-
-;; Specialized lowerings for `(band x (bnot y))` which is additionally produced
-;; by Cranelift's `band_not` instruction that is legalized into the simpler
-;; forms early on.
-
-(decl sse_and_not (Type Xmm XmmMem) Xmm)
-(rule (sse_and_not $F32X4 x y) (x64_andnps x y))
-(rule (sse_and_not $F64X2 x y) (x64_andnpd x y))
-(rule -1 (sse_and_not (multi_lane _bits _lanes) x y) (x64_pandn x y))
-
-;; Note the flipping of operands below as we're match
-;;
-;;   (band x (bnot y))
-;;
-;; while x86 does
-;;
-;;   pandn(x, y) = and(not(x), y)
-(rule 8 (lower (has_type ty @ (multi_lane _bits _lane) (band x (bnot y))))
-      (sse_and_not ty y x))
-(rule 9 (lower (has_type ty @ (multi_lane _bits _lane) (band (bnot y) x)))
-      (sse_and_not ty y x))
-
-(rule 10 (lower (has_type ty (band x (bnot y))))
-      (if (ty_int_ref_scalar_64 ty))
-      (if-let $true (use_bmi1))
-      ;; the first argument is the one that gets inverted with andn
-      (x64_andn ty y x))
-(rule 11 (lower (has_type ty (band (bnot y) x)))
-      (if (ty_int_ref_scalar_64 ty))
-      (if-let $true (use_bmi1))
-      (x64_andn ty y x))
-
-;; Specialization of `blsr` for BMI1
-
-(decl pure partial val_minus_one (Value) Value)
-(rule 0 (val_minus_one (isub x (u64_from_iconst 1))) x)
-(rule 0 (val_minus_one (iadd x (i64_from_iconst -1))) x)
-(rule 1 (val_minus_one (iadd (i64_from_iconst -1) x)) x)
-
-(rule 12 (lower (has_type (ty_32_or_64 ty) (band x y)))
-         (if-let $true (use_bmi1))
-         (if-let x (val_minus_one y))
-         (x64_blsr ty x))
-(rule 13 (lower (has_type (ty_32_or_64 ty) (band y x)))
-         (if-let $true (use_bmi1))
-         (if-let x (val_minus_one y))
-         (x64_blsr ty x))
-
-;; Specialization of `blsi` for BMI1
-
-(rule 14 (lower (has_type (ty_32_or_64 ty) (band (ineg x) x)))
-         (if-let $true (use_bmi1))
-         (x64_blsi ty x))
-(rule 15 (lower (has_type (ty_32_or_64 ty) (band x (ineg x))))
-         (if-let $true (use_bmi1))
-         (x64_blsi ty x))
-
-;; Specialization of `bzhi` for BMI2
-;;
-;; The `bzhi` instruction clears all bits indexed by the second operand of the
-;; first operand. This is pattern-matched here with a `band` against a mask
-;; which is generated to be N bits large. Note that if the index is larger than
-;; the bit-width of the type then `bzhi` doesn't have the same semantics as
-;; `ishl`, so an `and` instruction is required to mask the index to match the
-;; semantics of Cranelift's `ishl`.
-
-(rule 16 (lower (has_type (ty_32_or_64 ty) (band x y)))
-         (if-let $true (use_bmi2))
-         (if-let (ishl (u64_from_iconst 1) index) (val_minus_one y))
-         (x64_bzhi ty x (x64_and ty index (RegMemImm.Imm (u32_sub (ty_bits ty) 1)))))
-
-;;;; Rules for `bor` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `{i,b}64` and smaller.
-
-;; Or two registers.
-(rule 0 (lower (has_type ty (bor x y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_or ty x y))
-
-;; Handle immediates/sinkable loads on the lhs in addition to the automatic
-;; handling of the rhs above
-
-(rule 1 (lower (has_type ty (bor (sinkable_load x) y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_or ty y x))
-
-(rule 2 (lower (has_type ty (bor (simm32_from_value x) y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_or ty y x))
-
-;; f32 and f64
-
-(rule 5 (lower (has_type (ty_scalar_float ty) (bor x y)))
-      (sse_or ty x y))
-
-;; SSE.
-
-(decl sse_or (Type Xmm XmmMem) Xmm)
-(rule (sse_or $F32X4 x y) (x64_orps x y))
-(rule (sse_or $F64X2 x y) (x64_orpd x y))
-(rule (sse_or $F32 x y) (x64_orps x y))
-(rule (sse_or $F64 x y) (x64_orpd x y))
-(rule -1 (sse_or (multi_lane _bits _lanes) x y) (x64_por x y))
-
-(rule 6 (lower (has_type ty @ (multi_lane _bits _lanes)
-                       (bor x y)))
-      (sse_or ty x y))
-
-;; `{i,b}128`.
-
-(decl or_i128 (ValueRegs ValueRegs) ValueRegs)
-(rule (or_i128 x y)
-      (let ((x_lo Gpr (value_regs_get_gpr x 0))
-            (x_hi Gpr (value_regs_get_gpr x 1))
-            (y_lo Gpr (value_regs_get_gpr y 0))
-            (y_hi Gpr (value_regs_get_gpr y 1)))
-        (value_gprs (x64_or $I64 x_lo y_lo)
-                    (x64_or $I64 x_hi y_hi))))
-
-(rule 7 (lower (has_type $I128 (bor x y)))
-      (or_i128 x y))
-
-;;;; Rules for `bxor` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `{i,b}64` and smaller.
-
-;; Xor two registers.
-(rule 0 (lower (has_type ty (bxor x y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_xor ty x y))
-
-;; Handle xor with lhs immediates/sinkable loads in addition to the automatic
-;; handling of the rhs above.
-
-(rule 1 (lower (has_type ty (bxor (sinkable_load x) y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_xor ty y x))
-
-(rule 4 (lower (has_type ty (bxor (simm32_from_value x) y)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_xor ty y x))
-
-;; f32 and f64
-
-(rule 5 (lower (has_type (ty_scalar_float ty) (bxor x y)))
-      (x64_xor_vector ty x y))
-
-;; SSE.
-
-(rule 6 (lower (has_type ty @ (multi_lane _bits _lanes) (bxor x y)))
-      (x64_xor_vector ty x y))
-
-;; `{i,b}128`.
-
-(rule 7 (lower (has_type $I128 (bxor x y)))
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1))
-            (y_regs ValueRegs y)
-            (y_lo Gpr (value_regs_get_gpr y_regs 0))
-            (y_hi Gpr (value_regs_get_gpr y_regs 1)))
-        (value_gprs (x64_xor $I64 x_lo y_lo)
-                    (x64_xor $I64 x_hi y_hi))))
-
-;; Specialization of `blsmsk` for BMI1
-
-(rule 8 (lower (has_type (ty_32_or_64 ty) (bxor x y)))
-        (if-let $true (use_bmi1))
-        (if-let x (val_minus_one y))
-        (x64_blsmsk ty x))
-(rule 9 (lower (has_type (ty_32_or_64 ty) (bxor y x)))
-        (if-let $true (use_bmi1))
-        (if-let x (val_minus_one y))
-        (x64_blsmsk ty x))
-
-;;;; Rules for `ishl` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (ishl src amt)))
-      (x64_shl ty src (put_masked_in_imm8_gpr amt ty)))
-
-;; `i128`.
-
-(decl shl_i128 (ValueRegs Gpr) ValueRegs)
-(rule (shl_i128 src amt)
-      ;; Unpack the registers that make up the 128-bit value being shifted.
-      (let ((src_lo Gpr (value_regs_get_gpr src 0))
-            (src_hi Gpr (value_regs_get_gpr src 1))
-            ;; Do two 64-bit shifts.
-            (lo_shifted Gpr (x64_shl $I64 src_lo amt))
-            (hi_shifted Gpr (x64_shl $I64 src_hi amt))
-            ;; `src_lo >> (64 - amt)` are the bits to carry over from the lo
-            ;; into the hi.
-            (carry Gpr (x64_shr $I64
-                            src_lo
-                            (x64_sub $I64
-                                 (imm $I64 64)
-                                 amt)))
-            (zero Gpr (imm $I64 0))
-            ;; Nullify the carry if we are shifting in by a multiple of 128.
-            (carry_ Gpr (with_flags_reg (x64_test (OperandSize.Size64)
-                                              amt
-                                              (RegMemImm.Imm 127))
-                                        (cmove $I64
-                                               (CC.Z)
-                                               zero
-                                               carry)))
-            ;; Add the carry into the high half.
-            (hi_shifted_ Gpr (x64_or $I64 carry_ hi_shifted)))
-        ;; Combine the two shifted halves. However, if we are shifting by >= 64
-        ;; (modulo 128), then the low bits are zero and the high bits are our
-        ;; low bits.
-        (with_flags (x64_test (OperandSize.Size64) amt (RegMemImm.Imm 64))
-                    (consumes_flags_concat
-                     (cmove $I64 (CC.Z) lo_shifted zero)
-                     (cmove $I64 (CC.Z) hi_shifted_ lo_shifted)))))
-
-(rule (lower (has_type $I128 (ishl src amt)))
-      ;; NB: Only the low bits of `amt` matter since we logically mask the shift
-      ;; amount to the value's bit width.
-      (let ((amt_ Gpr (lo_gpr amt)))
-        (shl_i128 src amt_)))
-
-;; SSE.
-
-;; Since the x86 instruction set does not have any 8x16 shift instructions (even
-;; in higher feature sets like AVX), we lower the `ishl.i8x16` to a sequence of
-;; instructions. The basic idea, whether the amount to shift by is an immediate
-;; or not, is to use a 16x8 shift and then mask off the incorrect bits to 0s.
-(rule (lower (has_type ty @ $I8X16 (ishl src amt)))
-      (let (
-            ;; Mask the amount to ensure wrapping behaviour
-            (masked_amt RegMemImm (mask_xmm_shift ty amt))
-            ;; Shift `src` using 16x8. Unfortunately, a 16x8 shift will only be
-            ;; correct for half of the lanes; the others must be fixed up with
-            ;; the mask below.
-            (unmasked Xmm (x64_psllw src (mov_rmi_to_xmm masked_amt)))
-            (mask_addr SyntheticAmode (ishl_i8x16_mask masked_amt))
-            (mask Reg (x64_load $I8X16 mask_addr (ExtKind.None))))
-        (sse_and $I8X16 unmasked (RegMem.Reg mask))))
-
-;; Get the address of the mask to use when fixing up the lanes that weren't
-;; correctly generated by the 16x8 shift.
-(decl ishl_i8x16_mask (RegMemImm) SyntheticAmode)
-
-;; When the shift amount is known, we can statically (i.e. at compile time)
-;; determine the mask to use and only emit that.
-(decl ishl_i8x16_mask_for_const (u32) SyntheticAmode)
-(extern constructor ishl_i8x16_mask_for_const ishl_i8x16_mask_for_const)
-(rule (ishl_i8x16_mask (RegMemImm.Imm amt))
-      (ishl_i8x16_mask_for_const amt))
-
-;; Otherwise, we must emit the entire mask table and dynamically (i.e. at run
-;; time) find the correct mask offset in the table. We use `lea` to find the
-;; base address of the mask table and then complex addressing to offset to the
-;; right mask: `base_address + amt << 4`
-(decl ishl_i8x16_mask_table () SyntheticAmode)
-(extern constructor ishl_i8x16_mask_table ishl_i8x16_mask_table)
-(rule (ishl_i8x16_mask (RegMemImm.Reg amt))
-      (let ((mask_table SyntheticAmode (ishl_i8x16_mask_table))
-            (base_mask_addr Gpr (x64_lea $I64 mask_table))
-            (mask_offset Gpr (x64_shl $I64 amt
-                                  (imm8_to_imm8_gpr 4))))
-        (Amode.ImmRegRegShift 0
-                              base_mask_addr
-                              mask_offset
-                              0
-                              (mem_flags_trusted))))
-
-(rule (ishl_i8x16_mask (RegMemImm.Mem amt))
-      (ishl_i8x16_mask (RegMemImm.Reg (x64_load $I64 amt (ExtKind.None)))))
-
-;; 16x8, 32x4, and 64x2 shifts can each use a single instruction, once the shift amount is masked.
-
-(rule (lower (has_type ty @ $I16X8 (ishl src amt)))
-      (x64_psllw src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-(rule (lower (has_type ty @ $I32X4 (ishl src amt)))
-      (x64_pslld src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-(rule (lower (has_type ty @ $I64X2 (ishl src amt)))
-      (x64_psllq src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-;;;; Rules for `ushr` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (ushr src amt)))
-      (let ((src_ Gpr (extend_to_gpr src ty (ExtendKind.Zero))))
-        (x64_shr ty src_ (put_masked_in_imm8_gpr amt ty))))
-
-;; `i128`.
-
-(decl shr_i128 (ValueRegs Gpr) ValueRegs)
-(rule (shr_i128 src amt)
-      ;; Unpack the lo/hi halves of `src`.
-      (let ((src_lo Gpr (value_regs_get_gpr src 0))
-            (src_hi Gpr (value_regs_get_gpr src 1))
-            ;; Do a shift on each half.
-            (lo_shifted Gpr (x64_shr $I64 src_lo amt))
-            (hi_shifted Gpr (x64_shr $I64 src_hi amt))
-            ;; `src_hi << (64 - amt)` are the bits to carry over from the hi
-            ;; into the lo.
-            (carry Gpr (x64_shl $I64
-                            src_hi
-                            (x64_sub $I64
-                                 (imm $I64 64)
-                                 amt)))
-            ;; Share the zero value to reduce register pressure
-            (zero Gpr (imm $I64 0))
-
-            ;; Nullify the carry if we are shifting by a multiple of 128.
-            (carry_ Gpr (with_flags_reg (x64_test (OperandSize.Size64) amt (RegMemImm.Imm 127))
-                                        (cmove $I64 (CC.Z) zero carry)))
-            ;; Add the carry bits into the lo.
-            (lo_shifted_ Gpr (x64_or $I64 carry_ lo_shifted)))
-        ;; Combine the two shifted halves. However, if we are shifting by >= 64
-        ;; (modulo 128), then the hi bits are zero and the lo bits are what
-        ;; would otherwise be our hi bits.
-        (with_flags (x64_test (OperandSize.Size64) amt (RegMemImm.Imm 64))
-                    (consumes_flags_concat
-                     (cmove $I64 (CC.Z) lo_shifted_ hi_shifted)
-                     (cmove $I64 (CC.Z) hi_shifted zero)))))
-
-(rule (lower (has_type $I128 (ushr src amt)))
-      ;; NB: Only the low bits of `amt` matter since we logically mask the shift
-      ;; amount to the value's bit width.
-      (let ((amt_ Gpr (lo_gpr amt)))
-        (shr_i128 src amt_)))
-
-;; SSE.
-
-;; There are no 8x16 shifts in x64. Do the same 16x8-shift-and-mask thing we do
-;; with 8x16 `ishl`.
-(rule (lower (has_type ty @ $I8X16 (ushr src amt)))
-      (let (
-            ;; Mask the amount to ensure wrapping behaviour
-            (masked_amt RegMemImm (mask_xmm_shift ty amt))
-            ;; Shift `src` using 16x8. Unfortunately, a 16x8 shift will only be
-            ;; correct for half of the lanes; the others must be fixed up with
-            ;; the mask below.
-            (unmasked Xmm (x64_psrlw src (mov_rmi_to_xmm masked_amt))))
-        (sse_and $I8X16
-                 unmasked
-                 (ushr_i8x16_mask masked_amt))))
-
-;; Get the address of the mask to use when fixing up the lanes that weren't
-;; correctly generated by the 16x8 shift.
-(decl ushr_i8x16_mask (RegMemImm) SyntheticAmode)
-
-;; When the shift amount is known, we can statically (i.e. at compile time)
-;; determine the mask to use and only emit that.
-(decl ushr_i8x16_mask_for_const (u32) SyntheticAmode)
-(extern constructor ushr_i8x16_mask_for_const ushr_i8x16_mask_for_const)
-(rule (ushr_i8x16_mask (RegMemImm.Imm amt))
-      (ushr_i8x16_mask_for_const amt))
-
-;; Otherwise, we must emit the entire mask table and dynamically (i.e. at run
-;; time) find the correct mask offset in the table. We use `lea` to find the
-;; base address of the mask table and then complex addressing to offset to the
-;; right mask: `base_address + amt << 4`
-(decl ushr_i8x16_mask_table () SyntheticAmode)
-(extern constructor ushr_i8x16_mask_table ushr_i8x16_mask_table)
-(rule (ushr_i8x16_mask (RegMemImm.Reg amt))
-      (let ((mask_table SyntheticAmode (ushr_i8x16_mask_table))
-            (base_mask_addr Gpr (x64_lea $I64 mask_table))
-            (mask_offset Gpr (x64_shl $I64
-                                  amt
-                                  (imm8_to_imm8_gpr 4))))
-        (Amode.ImmRegRegShift 0
-                              base_mask_addr
-                              mask_offset
-                              0
-                              (mem_flags_trusted))))
-
-(rule (ushr_i8x16_mask (RegMemImm.Mem amt))
-      (ushr_i8x16_mask (RegMemImm.Reg (x64_load $I64 amt (ExtKind.None)))))
-
-;; 16x8, 32x4, and 64x2 shifts can each use a single instruction, once the shift amount is masked.
-
-(rule (lower (has_type ty @ $I16X8 (ushr src amt)))
-      (x64_psrlw src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-(rule (lower (has_type ty @ $I32X4 (ushr src amt)))
-      (x64_psrld src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-(rule (lower (has_type ty @ $I64X2 (ushr src amt)))
-      (x64_psrlq src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-(decl mask_xmm_shift (Type Value) RegMemImm)
-(rule (mask_xmm_shift ty amt)
-      (gpr_to_reg (x64_and $I64 amt (RegMemImm.Imm (shift_mask ty)))))
-(rule 1 (mask_xmm_shift ty (iconst n))
-      (RegMemImm.Imm (shift_amount_masked ty n)))
-
-;;;; Rules for `sshr` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (sshr src amt)))
-      (let ((src_ Gpr (extend_to_gpr src ty (ExtendKind.Sign))))
-        (x64_sar ty src_ (put_masked_in_imm8_gpr amt ty))))
-
-;; `i128`.
-
-(decl sar_i128 (ValueRegs Gpr) ValueRegs)
-(rule (sar_i128 src amt)
-      ;; Unpack the low/high halves of `src`.
-      (let ((src_lo Gpr (value_regs_get_gpr src 0))
-            (src_hi Gpr (value_regs_get_gpr src 1))
-            ;; Do a shift of each half. NB: the low half uses an unsigned shift
-            ;; because its MSB is not a sign bit.
-            (lo_shifted Gpr (x64_shr $I64 src_lo amt))
-            (hi_shifted Gpr (x64_sar $I64 src_hi amt))
-            ;; `src_hi << (64 - amt)` are the bits to carry over from the low
-            ;; half to the high half.
-            (carry Gpr (x64_shl $I64
-                            src_hi
-                            (x64_sub $I64
-                                 (imm $I64 64)
-                                 amt)))
-            ;; Nullify the carry if we are shifting by a multiple of 128.
-            (carry_ Gpr (with_flags_reg (x64_test (OperandSize.Size64) amt (RegMemImm.Imm 127))
-                                        (cmove $I64 (CC.Z) (imm $I64 0) carry)))
-            ;; Add the carry into the low half.
-            (lo_shifted_ Gpr (x64_or $I64 lo_shifted carry_))
-            ;; Get all sign bits.
-            (sign_bits Gpr (x64_sar $I64 src_hi (imm8_to_imm8_gpr 63))))
-        ;; Combine the two shifted halves. However, if we are shifting by >= 64
-        ;; (modulo 128), then the hi bits are all sign bits and the lo bits are
-        ;; what would otherwise be our hi bits.
-        (with_flags (x64_test (OperandSize.Size64) amt (RegMemImm.Imm 64))
-                    (consumes_flags_concat
-                     (cmove $I64 (CC.Z) lo_shifted_ hi_shifted)
-                     (cmove $I64 (CC.Z) hi_shifted sign_bits)))))
-
-(rule (lower (has_type $I128 (sshr src amt)))
-      ;; NB: Only the low bits of `amt` matter since we logically mask the shift
-      ;; amount to the value's bit width.
-      (let ((amt_ Gpr (lo_gpr amt)))
-        (sar_i128 src amt_)))
-
-;; SSE.
-
-;; Since the x86 instruction set does not have an 8x16 shift instruction and the
-;; approach used for `ishl` and `ushr` cannot be easily used (the masks do not
-;; preserve the sign), we use a different approach here: separate the low and
-;; high lanes, shift them separately, and merge them into the final result.
-;;
-;; Visually, this looks like the following, where `src.i8x16 = [s0, s1, ...,
-;; s15]:
-;;
-;;   lo.i16x8 = [(s0, s0), (s1, s1), ..., (s7, s7)]
-;;   shifted_lo.i16x8 = shift each lane of `low`
-;;   hi.i16x8 = [(s8, s8), (s9, s9), ..., (s15, s15)]
-;;   shifted_hi.i16x8 = shift each lane of `high`
-;;   result = [s0'', s1'', ..., s15'']
-(rule (lower (has_type ty @ $I8X16 (sshr src amt @ (value_type amt_ty))))
-      (let ((src_ Xmm (put_in_xmm src))
-            ;; Mask the amount to ensure wrapping behaviour
-            (masked_amt RegMemImm (mask_xmm_shift ty amt))
-            ;; In order for `packsswb` later to only use the high byte of each
-            ;; 16x8 lane, we shift right an extra 8 bits, relying on `psraw` to
-            ;; fill in the upper bits appropriately.
-            (lo Xmm (x64_punpcklbw src_ src_))
-            (hi Xmm (x64_punpckhbw src_ src_))
-            (amt_ XmmMemImm (sshr_i8x16_bigger_shift amt_ty masked_amt))
-            (shifted_lo Xmm (x64_psraw lo amt_))
-            (shifted_hi Xmm (x64_psraw hi amt_)))
-        (x64_packsswb shifted_lo shifted_hi)))
-
-(decl sshr_i8x16_bigger_shift (Type RegMemImm) XmmMemImm)
-(rule (sshr_i8x16_bigger_shift _ty (RegMemImm.Imm i))
-      (xmm_mem_imm_new (RegMemImm.Imm (u32_add i 8))))
-(rule (sshr_i8x16_bigger_shift ty (RegMemImm.Reg r))
-      (mov_rmi_to_xmm (RegMemImm.Reg (x64_add ty
-                                          r
-                                          (RegMemImm.Imm 8)))))
-(rule (sshr_i8x16_bigger_shift ty rmi @ (RegMemImm.Mem _m))
-      (mov_rmi_to_xmm (RegMemImm.Reg (x64_add ty
-                                          (imm ty 8)
-                                          rmi))))
-
-;; `sshr.{i16x8,i32x4}` can be a simple `psra{w,d}`, we just have to make sure
-;; that if the shift amount is in a register, it is in an XMM register.
-
-(rule (lower (has_type ty @ $I16X8 (sshr src amt)))
-      (x64_psraw src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-(rule (lower (has_type ty @ $I32X4 (sshr src amt)))
-      (x64_psrad src (mov_rmi_to_xmm (mask_xmm_shift ty amt))))
-
-;; The `sshr.i64x2` CLIF instruction has no single x86 instruction in the older
-;; feature sets. To remedy this, a small dance is done with an unsigned right
-;; shift plus some extra ops.
-(rule 3 (lower (has_type ty @ $I64X2 (sshr src (iconst n))))
-        (if-let $true (use_avx512vl))
-        (if-let $true (use_avx512f))
-        (x64_vpsraq_imm src (shift_amount_masked ty n)))
-
-(rule 2 (lower (has_type ty @ $I64X2 (sshr src amt)))
-        (if-let $true (use_avx512vl))
-        (if-let $true (use_avx512f))
-        (let ((masked Gpr (x64_and $I64 amt (RegMemImm.Imm (shift_mask ty)))))
-          (x64_vpsraq src (x64_movd_to_xmm masked))))
-
-(rule 1 (lower (has_type $I64X2 (sshr src (iconst (u64_from_imm64 (u64_as_u32 amt))))))
-        (lower_i64x2_sshr_imm src (u32_and amt 63)))
-
-(rule (lower (has_type $I64X2 (sshr src amt)))
-      (lower_i64x2_sshr_gpr src (x64_and $I64 amt (RegMemImm.Imm 63))))
-
-(decl lower_i64x2_sshr_imm (Xmm u32) Xmm)
-
-;; If the shift amount is less than 32 then do an sshr with 32-bit lanes to
-;; produce the upper halves of each result, followed by a ushr of 64-bit lanes
-;; to produce the lower halves of each result. Interleave results at the end.
-(rule 2 (lower_i64x2_sshr_imm vec imm)
-        (if-let $true (u64_lt imm 32))
-        (let (
-            (high32 Xmm (x64_psrad vec (xmi_imm imm)))
-            (high32 Xmm (x64_pshufd high32 0b11_10_11_01))
-            (low32  Xmm (x64_psrlq vec (xmi_imm imm)))
-            (low32  Xmm (x64_pshufd low32 0b11_10_10_00))
-          )
-          (x64_punpckldq low32 high32)))
-
-;; If the shift amount is 32 then the `psrlq` from the above rule can be avoided
-(rule 1 (lower_i64x2_sshr_imm vec 32)
-        (let (
-            (low32  Xmm (x64_pshufd vec 0b11_10_11_01))
-            (high32 Xmm (x64_psrad vec (xmi_imm 31)))
-            (high32 Xmm (x64_pshufd high32 0b11_10_11_01))
-          )
-          (x64_punpckldq low32 high32)))
-
-;; Shifts >= 32 use one `psrad` to generate the upper bits and second `psrad` to
-;; generate the lower bits. Everything is then woven back together with
-;; shuffles.
-(rule (lower_i64x2_sshr_imm vec imm)
-      (if-let $true (u64_lt 32 imm))
-      (let (
-          (high32 Xmm (x64_psrad vec (xmi_imm 31)))
-          (high32 Xmm (x64_pshufd high32 0b11_10_11_01))
-          (low32  Xmm (x64_psrad vec (xmi_imm (u32_sub imm 32))))
-          (low32  Xmm (x64_pshufd low32 0b11_10_11_01))
-        )
-        (x64_punpckldq low32 high32)))
-
-;; A variable shift amount is slightly more complicated than the immediate
-;; shift amounts from above. The `Gpr` argument is guaranteed to be <= 63 by
-;; earlier masking. A `ushr` operation is used with some xor/sub math to
-;; generate the sign bits.
-(decl lower_i64x2_sshr_gpr (Xmm Gpr) Xmm)
-(rule (lower_i64x2_sshr_gpr vec val)
-      (let (
-          (val                Xmm (x64_movq_to_xmm val))
-          (mask               Xmm (flip_high_bit_mask $I64X2))
-          (sign_bit_loc       Xmm (x64_psrlq mask val))
-          (ushr               Xmm (x64_psrlq vec val))
-          (ushr_sign_bit_flip Xmm (x64_pxor sign_bit_loc ushr))
-        )
-        (x64_psubq ushr_sign_bit_flip sign_bit_loc)))
-
-;;;; Rules for `rotl` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller: we can rely on x86's rotate-amount masking since
-;;  we operate on the whole register. For const's we mask the constant.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (rotl src amt)))
-        (x64_rotl ty src (put_masked_in_imm8_gpr amt ty)))
-
-
-;; `i128`.
-
-(rule (lower (has_type $I128 (rotl src amt)))
-      (let ((src_ ValueRegs src)
-            ;; NB: Only the low bits of `amt` matter since we logically mask the
-            ;; rotation amount to the value's bit width.
-            (amt_ Gpr (lo_gpr amt)))
-        (or_i128 (shl_i128 src_ amt_)
-                 (shr_i128 src_ (x64_sub $I64
-                                     (imm $I64 128)
-                                     amt_)))))
-
-;;;; Rules for `rotr` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller: we can rely on x86's rotate-amount masking since
-;;  we operate on the whole register. For const's we mask the constant.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (rotr src amt)))
-        (x64_rotr ty src (put_masked_in_imm8_gpr amt ty)))
-
-
-;; `i128`.
-
-(rule (lower (has_type $I128 (rotr src amt)))
-      (let ((src_ ValueRegs src)
-            ;; NB: Only the low bits of `amt` matter since we logically mask the
-            ;; rotation amount to the value's bit width.
-            (amt_ Gpr (lo_gpr amt)))
-        (or_i128 (shr_i128 src_ amt_)
-                 (shl_i128 src_ (x64_sub $I64
-                                     (imm $I64 128)
-                                     amt_)))))
-
-;;;; Rules for `ineg` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (ineg x)))
-      (x64_neg ty x))
-
-(rule -2 (lower (has_type $I128 (ineg x)))
-      ;; Get the high/low registers for `x`.
-      (let ((regs ValueRegs x)
-            (lo Gpr (value_regs_get_gpr regs 0))
-            (hi Gpr (value_regs_get_gpr regs 1)))
-        ;; Do a neg followed by an sub-with-borrow.
-        (with_flags (x64_neg_paired $I64 lo)
-                    (x64_sbb_paired $I64 (imm $I64 0) hi))))
-
-;; SSE.
-
-(rule (lower (has_type $I8X16 (ineg x)))
-      (x64_psubb (imm $I8X16 0) x))
-
-(rule (lower (has_type $I16X8 (ineg x)))
-      (x64_psubw (imm $I16X8 0) x))
-
-(rule (lower (has_type $I32X4 (ineg x)))
-      (x64_psubd (imm $I32X4 0) x))
-
-(rule (lower (has_type $I64X2 (ineg x)))
-      (x64_psubq (imm $I64X2 0) x))
-
-;;;; Rules for `avg_round` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (multi_lane 8 16)
-                       (avg_round x y)))
-      (x64_pavgb x y))
-
-(rule (lower (has_type (multi_lane 16 8)
-                       (avg_round x y)))
-      (x64_pavgw x y))
-
-;;;; Rules for `imul` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-;; 8-bit base case, needs a special instruction encoding and additionally
-;; move sinkable loads to the right.
-(rule -7 (lower (has_type $I8 (imul x y))) (x64_mul8 $false x y))
-(rule -6 (lower (has_type $I8 (imul (sinkable_load x) y))) (x64_mul8 $false y x))
-
-;; 16-to-64-bit base cases, same as above by moving sinkable loads to the right.
-(rule -5 (lower (has_type (ty_int_ref_16_to_64 ty) (imul x y)))
-         (x64_imul ty x y))
-(rule -4 (lower (has_type (ty_int_ref_16_to_64 ty) (imul (sinkable_load x) y)))
-         (x64_imul ty y x))
-
-;; lift out constants to use 3-operand form
-(rule -3 (lower (has_type (ty_int_ref_16_to_64 ty) (imul x (i32_from_iconst y))))
-         (x64_imul_imm ty x y))
-(rule -2 (lower (has_type (ty_int_ref_16_to_64 ty) (imul (i32_from_iconst x) y)))
-         (x64_imul_imm ty y x))
-
-;; `i128`.
-
-;; mul:
-;;   dst_lo = lhs_lo * rhs_lo
-;;   dst_hi = umulhi(lhs_lo, rhs_lo) +
-;;            lhs_lo * rhs_hi +
-;;            lhs_hi * rhs_lo
-;;
-;; so we emit:
-;;   lo_hi = mul x_lo, y_hi
-;;   hi_lo = mul x_hi, y_lo
-;;   hilo_hilo = add lo_hi, hi_lo
-;;   dst_lo:hi_lolo = mulhi_u x_lo, y_lo
-;;   dst_hi = add hilo_hilo, hi_lolo
-;;   return (dst_lo, dst_hi)
-(rule 2 (lower (has_type $I128 (imul x y)))
-      ;; Put `x` into registers and unpack its hi/lo halves.
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1))
-            ;; Put `y` into registers and unpack its hi/lo halves.
-            (y_regs ValueRegs y)
-            (y_lo Gpr (value_regs_get_gpr y_regs 0))
-            (y_hi Gpr (value_regs_get_gpr y_regs 1))
-            ;; lo_hi = mul x_lo, y_hi
-            (lo_hi Gpr (x64_imul $I64 x_lo y_hi))
-            ;; hi_lo = mul x_hi, y_lo
-            (hi_lo Gpr (x64_imul $I64 x_hi y_lo))
-            ;; hilo_hilo = add lo_hi, hi_lo
-            (hilo_hilo Gpr (x64_add $I64 lo_hi hi_lo))
-            ;; dst_lo:hi_lolo = x64_mul x_lo, y_lo
-            (mul_regs ValueRegs (x64_mul $I64 $false x_lo y_lo))
-            (dst_lo Gpr (value_regs_get_gpr mul_regs 0))
-            (hi_lolo Gpr (value_regs_get_gpr mul_regs 1))
-            ;; dst_hi = add hilo_hilo, hi_lolo
-            (dst_hi Gpr (x64_add $I64 hilo_hilo hi_lolo)))
-        (value_gprs dst_lo dst_hi)))
-
-;; SSE.
-
-;; (No i8x16 multiply.)
-
-(rule (lower (has_type (multi_lane 16 8) (imul x y)))
-      (x64_pmullw x y))
-
-(rule (lower (has_type (multi_lane 32 4) (imul x y)))
-      (if-let $true (use_sse41))
-      (x64_pmulld x y))
-
-;; Without `pmulld` the `pmuludq` instruction is used instead which performs
-;; 32-bit multiplication storing the 64-bit result. The 64-bit result is
-;; truncated to 32-bits and everything else is woven into place.
-(rule -1 (lower (has_type (multi_lane 32 4) (imul x y)))
-         (let (
-            (x Xmm x)
-            (y Xmm y)
-            (x_hi Xmm (x64_pshufd x 0b00_11_00_01))
-            (y_hi Xmm (x64_pshufd y 0b00_11_00_01))
-            (mul_lo Xmm (x64_pshufd (x64_pmuludq x y)       0b00_00_10_00))
-            (mul_hi Xmm (x64_pshufd (x64_pmuludq x_hi y_hi) 0b00_00_10_00))
-          )
-          (x64_punpckldq mul_lo mul_hi)))
-
-;; With AVX-512 we can implement `i64x2` multiplication with a single
-;; instruction.
-(rule 3 (lower (has_type (multi_lane 64 2) (imul x y)))
-      (if-let $true (use_avx512vl))
-      (if-let $true (use_avx512dq))
-      (x64_vpmullq x y))
-
-;; Otherwise, for i64x2 multiplication we describe a lane A as being composed of
-;; a 32-bit upper half "Ah" and a 32-bit lower half "Al". The 32-bit long hand
-;; multiplication can then be written as:
-;;
-;;    Ah Al
-;; *  Bh Bl
-;;    -----
-;;    Al * Bl
-;; + (Ah * Bl) << 32
-;; + (Al * Bh) << 32
-;;
-;; So for each lane we will compute:
-;;
-;;   A * B  = (Al * Bl) + ((Ah * Bl) + (Al * Bh)) << 32
-;;
-;; Note, the algorithm will use `pmuludq` which operates directly on the lower
-;; 32-bit (`Al` or `Bl`) of a lane and writes the result to the full 64-bits of
-;; the lane of the destination. For this reason we don't need shifts to isolate
-;; the lower 32-bits, however, we will need to use shifts to isolate the high
-;; 32-bits when doing calculations, i.e., `Ah == A >> 32`.
-(rule (lower (has_type (multi_lane 64 2)
-                       (imul a b)))
-      (let ((a0 Xmm a)
-            (b0 Xmm b)
-            ;; a_hi = A >> 32
-            (a_hi Xmm (x64_psrlq a0 (xmi_imm 32)))
-            ;; ah_bl = Ah * Bl
-            (ah_bl Xmm (x64_pmuludq a_hi b0))
-            ;; b_hi = B >> 32
-            (b_hi Xmm (x64_psrlq b0 (xmi_imm 32)))
-            ;; al_bh = Al * Bh
-            (al_bh Xmm (x64_pmuludq a0 b_hi))
-            ;; aa_bb = ah_bl + al_bh
-            (aa_bb Xmm (x64_paddq ah_bl al_bh))
-            ;; aa_bb_shifted = aa_bb << 32
-            (aa_bb_shifted Xmm (x64_psllq aa_bb (xmi_imm 32)))
-            ;; al_bl = Al * Bl
-            (al_bl Xmm (x64_pmuludq a0 b0)))
-        ;; al_bl + aa_bb_shifted
-        (x64_paddq al_bl aa_bb_shifted)))
-
-;; Special case for `i32x4.extmul_high_i16x8_s`.
-(rule 1 (lower (has_type (multi_lane 32 4)
-                       (imul (swiden_high (and (value_type (multi_lane 16 8))
-                                               x))
-                             (swiden_high (and (value_type (multi_lane 16 8))
-                                               y)))))
-      (let ((x2 Xmm x)
-            (y2 Xmm y)
-            (lo Xmm (x64_pmullw x2 y2))
-            (hi Xmm (x64_pmulhw x2 y2)))
-        (x64_punpckhwd lo hi)))
-
-;; Special case for `i64x2.extmul_high_i32x4_s`.
-(rule 1 (lower (has_type (multi_lane 64 2)
-                       (imul (swiden_high (and (value_type (multi_lane 32 4))
-                                               x))
-                             (swiden_high (and (value_type (multi_lane 32 4))
-                                               y)))))
-      (if-let $true (use_sse41))
-      (let ((x2 Xmm (x64_pshufd x 0xFA))
-            (y2 Xmm (x64_pshufd y 0xFA)))
-        (x64_pmuldq x2 y2)))
-
-;; Special case for `i32x4.extmul_low_i16x8_s`.
-(rule 1 (lower (has_type (multi_lane 32 4)
-                       (imul (swiden_low (and (value_type (multi_lane 16 8))
-                                              x))
-                             (swiden_low (and (value_type (multi_lane 16 8))
-                                              y)))))
-      (let ((x2 Xmm x)
-            (y2 Xmm y)
-            (lo Xmm (x64_pmullw x2 y2))
-            (hi Xmm (x64_pmulhw x2 y2)))
-        (x64_punpcklwd lo hi)))
-
-;; Special case for `i64x2.extmul_low_i32x4_s`.
-(rule 1 (lower (has_type (multi_lane 64 2)
-                       (imul (swiden_low (and (value_type (multi_lane 32 4))
-                                              x))
-                             (swiden_low (and (value_type (multi_lane 32 4))
-                                              y)))))
-      (if-let $true (use_sse41))
-      (let ((x2 Xmm (x64_pshufd x 0x50))
-            (y2 Xmm (x64_pshufd y 0x50)))
-        (x64_pmuldq x2 y2)))
-
-;; Special case for `i32x4.extmul_high_i16x8_u`.
-(rule 1 (lower (has_type (multi_lane 32 4)
-                       (imul (uwiden_high (and (value_type (multi_lane 16 8))
-                                               x))
-                             (uwiden_high (and (value_type (multi_lane 16 8))
-                                               y)))))
-      (let ((x2 Xmm x)
-            (y2 Xmm y)
-            (lo Xmm (x64_pmullw x2 y2))
-            (hi Xmm (x64_pmulhuw x2 y2)))
-        (x64_punpckhwd lo hi)))
-
-;; Special case for `i64x2.extmul_high_i32x4_u`.
-(rule 1 (lower (has_type (multi_lane 64 2)
-                       (imul (uwiden_high (and (value_type (multi_lane 32 4))
-                                               x))
-                             (uwiden_high (and (value_type (multi_lane 32 4))
-                                               y)))))
-      (let ((x2 Xmm (x64_pshufd x 0xFA))
-            (y2 Xmm (x64_pshufd y 0xFA)))
-        (x64_pmuludq x2 y2)))
-
-;; Special case for `i32x4.extmul_low_i16x8_u`.
-(rule 1 (lower (has_type (multi_lane 32 4)
-                       (imul (uwiden_low (and (value_type (multi_lane 16 8))
-                                              x))
-                             (uwiden_low (and (value_type (multi_lane 16 8))
-                                              y)))))
-      (let ((x2 Xmm x)
-            (y2 Xmm y)
-            (lo Xmm (x64_pmullw x2 y2))
-            (hi Xmm (x64_pmulhuw x2 y2)))
-        (x64_punpcklwd lo hi)))
-
-;; Special case for `i64x2.extmul_low_i32x4_u`.
-(rule 1 (lower (has_type (multi_lane 64 2)
-                       (imul (uwiden_low (and (value_type (multi_lane 32 4))
-                                              x))
-                             (uwiden_low (and (value_type (multi_lane 32 4))
-                                              y)))))
-      (let ((x2 Xmm (x64_pshufd x 0x50))
-            (y2 Xmm (x64_pshufd y 0x50)))
-        (x64_pmuludq x2 y2)))
-
-;;;; Rules for `iabs` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (has_type $I8X16 (iabs x)))
-        (if-let $true (use_ssse3))
-        (x64_pabsb x))
-
-;; Note the use of `pminub` with signed inputs will produce the positive signed
-;; result which is what is desired here. The `pmaxub` isn't available until
-;; SSE4.1 in which case the single-instruction above lowering would apply.
-(rule (lower (has_type $I8X16 (iabs x)))
-      (let (
-          (x Xmm x)
-          (negated Xmm (x64_psubb (xmm_zero $I8X16) x))
-        )
-        (x64_pminub x negated)))
-
-(rule 1 (lower (has_type $I16X8 (iabs x)))
-        (if-let $true (use_ssse3))
-        (x64_pabsw x))
-
-(rule (lower (has_type $I16X8 (iabs x)))
-      (let (
-          (x Xmm x)
-          (negated Xmm (x64_psubw (xmm_zero $I16X8) x))
-        )
-        (x64_pmaxsw x negated)))
-
-(rule 1 (lower (has_type $I32X4 (iabs x)))
-        (if-let $true (use_ssse3))
-        (x64_pabsd x))
-
-;; Generate a `negative_mask` which is either numerically -1 or 0 depending on
-;; if the lane is negative. If the lane is positive then the xor operation
-;; won't change the lane but otherwise it'll bit-flip everything. By then
-;; subtracting the mask this subtracts 0 for positive lanes (does nothing) or
-;; ends up adding one for negative lanes. This means that for a negative lane
-;; `x` the result is `!x + 1` which is the result of negating it.
-(rule (lower (has_type $I32X4 (iabs x)))
-      (let (
-          (x Xmm x)
-          (negative_mask Xmm (x64_psrad x (xmi_imm 31)))
-          (flipped_if_negative Xmm (x64_pxor x negative_mask))
-        )
-        (x64_psubd flipped_if_negative negative_mask)))
-
-;; When AVX512 is available, we can use a single `vpabsq` instruction.
-(rule 2 (lower (has_type $I64X2 (iabs x)))
-      (if-let $true (use_avx512vl))
-      (if-let $true (use_avx512f))
-      (x64_vpabsq x))
-
-;; Otherwise, we use a separate register, `neg`, to contain the results of `0 -
-;; x` and then blend in those results with `blendvpd` if the MSB of `neg` was
-;; set to 1 (i.e. if `neg` was negative or, conversely, if `x` was originally
-;; positive).
-(rule 1 (lower (has_type $I64X2 (iabs x)))
-        (if-let $true (use_sse41))
-        (let ((rx Xmm x)
-              (neg Xmm (x64_psubq (imm $I64X2 0) rx)))
-          (x64_blendvpd neg rx neg)))
-
-;; and if `blendvpd` isn't available then perform a shift/shuffle to generate a
-;; mask of which lanes are negative, followed by flipping bits/sub to make both
-;; positive.
-(rule (lower (has_type $I64X2 (iabs x)))
-      (let ((x Xmm x)
-            (signs Xmm (x64_psrad x (RegMemImm.Imm 31)))
-            (signs Xmm (x64_pshufd signs 0b11_11_01_01))
-            (xor_if_negative Xmm (x64_pxor x signs)))
-        (x64_psubq xor_if_negative signs)))
-
-;; `i64` and smaller.
-
-(rule -1 (lower (has_type (fits_in_64 ty) (iabs x)))
-      (let ((src Gpr x)
-            (neg ProducesFlags (x64_neg_paired ty src))
-            ;; Manually extract the result from the neg, then ignore
-            ;; it below, since we need to pass it into the cmove
-            ;; before we pass the cmove to with_flags_reg.
-            (neg_result Gpr (produces_flags_get_reg neg))
-            ;; When the neg instruction sets the sign flag,
-            ;; takes the original (non-negative) value.
-            (cmove ConsumesFlags (cmove ty (CC.S) src neg_result)))
-        (with_flags_reg (produces_flags_ignore neg) cmove)))
-
-;; `i128`. Negate the low bits, `adc` to the higher bits, then negate high bits.
-(rule (lower (has_type $I128 (iabs x)))
-      ;; Get the high/low registers for `x`.
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1))
-            ; negate low bits, then add 0 with carry to high bits.
-            (neg_lo ProducesFlags (x64_neg_paired $I64 x_lo))
-            (adc_hi ConsumesFlags (x64_adc_paired $I64 x_hi (imm $I64 0)))
-            (neg_adc_vals ValueRegs (with_flags neg_lo adc_hi))
-            ; negate high bits.
-            (neg_hi ProducesFlags (x64_neg_paired $I64 (value_regs_get neg_adc_vals 1)))
-            (neg_hi_flag_only ProducesFlags (produces_flags_ignore neg_hi))
-            ; cmove based on sign flag from hi negation.
-            (cmove_lo ConsumesFlags (cmove $I64 (CC.S) x_lo
-                                     (value_regs_get neg_adc_vals 0)))
-            (cmove_hi ConsumesFlags (cmove $I64 (CC.S) x_hi
-                                     (produces_flags_get_reg neg_hi)))
-            (cmoves ConsumesFlags (consumes_flags_concat cmove_lo cmove_hi)))
-        (with_flags neg_hi_flag_only cmoves)))
-
-;;;; Rules for `fabs` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fabs x)))
-      (x64_andps x (imm $F32 0x7fffffff)))
-
-(rule (lower (has_type $F64 (fabs x)))
-      (x64_andpd x (imm $F64 0x7fffffffffffffff)))
-
-;; Special case for `f32x4.abs`.
-(rule (lower (has_type $F32X4 (fabs x)))
-      (x64_andps x
-             (x64_psrld (vector_all_ones) (xmi_imm 1))))
-
-;; Special case for `f64x2.abs`.
-(rule (lower (has_type $F64X2 (fabs x)))
-      (x64_andpd x
-             (x64_psrlq (vector_all_ones) (xmi_imm 1))))
-
-;;;; Rules for `fneg` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fneg x)))
-      (x64_xorps x (imm $F32 0x80000000)))
-
-(rule (lower (has_type $F64 (fneg x)))
-      (x64_xorpd x (imm $F64 0x8000000000000000)))
-
-(rule (lower (has_type $F32X4 (fneg x)))
-      (x64_xorps x
-             (x64_pslld (vector_all_ones) (xmi_imm 31))))
-
-(rule (lower (has_type $F64X2 (fneg x)))
-      (x64_xorpd x
-             (x64_psllq (vector_all_ones) (xmi_imm 63))))
-
-;;;; Rules for `bmask` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(decl lower_bmask (Type Type ValueRegs) ValueRegs)
-
-;; Values that fit in a register
-;;
-;; Use the neg instruction on the input which sets the CF (carry) flag
-;; to 0 if the input is 0 or 1 otherwise.
-;; We then subtract the output register with itself, which always gives a 0,
-;; however use the carry flag from the previous negate to generate a -1 if it
-;; was nonzero.
-;;
-;; neg in_reg
-;; sbb out_reg, out_reg
-(rule 0
-      (lower_bmask (fits_in_64 out_ty) (fits_in_64 in_ty) val)
-      (let ((reg Gpr (value_regs_get_gpr val 0))
-            (out ValueRegs (with_flags
-                  (x64_neg_paired in_ty reg)
-                  (x64_sbb_paired out_ty reg reg))))
-        ;; Extract only the output of the sbb instruction
-        (value_reg (value_regs_get out 1))))
-
-
-;; If the input type is I128 we can `or` the registers, and recurse to the general case.
-(rule 1
-      (lower_bmask (fits_in_64 out_ty) $I128 val)
-      (let ((lo Gpr (value_regs_get_gpr val 0))
-            (hi Gpr (value_regs_get_gpr val 1))
-            (mixed Gpr (x64_or $I64 lo hi)))
-        (lower_bmask out_ty $I64 (value_reg mixed))))
-
-;; If the output type is I128 we just duplicate the result of the I64 lowering
-(rule 2
-      (lower_bmask $I128 in_ty val)
-      (let ((res ValueRegs (lower_bmask $I64 in_ty val))
-            (res Gpr (value_regs_get_gpr res 0)))
-        (value_regs res res)))
-
-
-;; Call the lower_bmask rule that does all the procssing
-(rule (lower (has_type out_ty (bmask x @ (value_type in_ty))))
-      (lower_bmask out_ty in_ty x))
-
-;;;; Rules for `bnot` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-(rule -2 (lower (has_type ty (bnot x)))
-      (if (ty_int_ref_scalar_64 ty))
-      (x64_not ty x))
-
-
-;; `i128`.
-
-(decl i128_not (Value) ValueRegs)
-(rule (i128_not x)
-      (let ((x_regs ValueRegs x)
-            (x_lo Gpr (value_regs_get_gpr x_regs 0))
-            (x_hi Gpr (value_regs_get_gpr x_regs 1)))
-        (value_gprs (x64_not $I64 x_lo)
-                    (x64_not $I64 x_hi))))
-
-(rule (lower (has_type $I128 (bnot x)))
-      (i128_not x))
-
-;; f32 and f64
-
-(rule -3 (lower (has_type (ty_scalar_float ty) (bnot x)))
-      (x64_xor_vector ty x (vector_all_ones)))
-
-;; Special case for vector-types where bit-negation is an xor against an
-;; all-one value
-(rule -1 (lower (has_type ty @ (multi_lane _bits _lanes) (bnot x)))
-      (x64_xor_vector ty x (vector_all_ones)))
-
-;;;; Rules for `bitselect` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type ty @ (multi_lane _bits _lanes)
-                       (bitselect condition
-                                  if_true
-                                  if_false)))
-      ;; a = and if_true, condition
-      ;; b = and_not condition, if_false
-      ;; or b, a
-      (let ((cond_xmm Xmm condition)
-            (a Xmm (sse_and ty if_true cond_xmm))
-            (b Xmm (sse_and_not ty cond_xmm if_false)))
-        (sse_or ty b a)))
-
-;; If every byte of the condition is guaranteed to be all ones or all zeroes,
-;; we can use x64_blend.
-(rule 1 (lower (has_type ty @ (multi_lane _bits _lanes)
-                         (bitselect condition
-                                    if_true
-                                    if_false)))
-      (if-let $true (use_sse41))
-      (if (all_ones_or_all_zeros condition))
-      (x64_pblendvb if_false if_true condition))
-
-(decl pure partial all_ones_or_all_zeros (Value) bool)
-(rule (all_ones_or_all_zeros (and (icmp _ _ _) (value_type (multi_lane _ _)))) $true)
-(rule (all_ones_or_all_zeros (and (fcmp _ _ _) (value_type (multi_lane _ _)))) $true)
-(rule (all_ones_or_all_zeros (and (bitcast _ (fcmp _ _ _)) (value_type (multi_lane _ _)))) $true)
-(rule (all_ones_or_all_zeros (vconst (vconst_all_ones_or_all_zeros))) $true)
-
-(decl pure vconst_all_ones_or_all_zeros () Constant)
-(extern extractor vconst_all_ones_or_all_zeros vconst_all_ones_or_all_zeros)
-
-;; Specializations for floating-pointer compares to generate a `minp*` or a
-;; `maxp*` instruction. These are equivalent to the wasm `f32x4.{pmin,pmax}`
-;; instructions and how they're lowered into CLIF. Note the careful ordering
-;; of all the operands here to ensure that the input CLIF matched is implemented
-;; by the corresponding x64 instruction.
-(rule 2 (lower (has_type $F32X4 (bitselect (bitcast _ (fcmp (FloatCC.LessThan) x y)) x y)))
-        (x64_minps x y))
-(rule 2 (lower (has_type $F64X2 (bitselect (bitcast _ (fcmp (FloatCC.LessThan) x y)) x y)))
-        (x64_minpd x y))
-
-(rule 3 (lower (has_type $F32X4 (bitselect (bitcast _ (fcmp (FloatCC.LessThan) y x)) x y)))
-        (x64_maxps x y))
-(rule 3 (lower (has_type $F64X2 (bitselect (bitcast _ (fcmp (FloatCC.LessThan) y x)) x y)))
-        (x64_maxpd x y))
-
-;; Scalar rules
-
-(rule 3 (lower (has_type $I128 (bitselect c t f)))
-      (let ((a ValueRegs (and_i128 c t))
-            (b ValueRegs (and_i128 (i128_not c) f)))
-        (or_i128 a b)))
-
-(rule 4 (lower (has_type (ty_int_ref_scalar_64 ty) (bitselect c t f)))
-      (let ((a Gpr (x64_and ty c t))
-            (b Gpr (x64_and ty (x64_not ty c) f)))
-        (x64_or ty a b)))
-
-(rule 5 (lower (has_type (ty_scalar_float ty) (bitselect c t f)))
-      (let ((a Xmm (sse_and ty c t))
-            (c_neg Xmm (x64_xor_vector ty c (vector_all_ones)))
-            (b Xmm (sse_and ty c_neg f)))
-        (sse_or ty a b)))
-
-;;;; Rules for `x86_blendv` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I8X16
-                       (x86_blendv condition if_true if_false)))
-      (if-let $true (use_sse41))
-      (x64_pblendvb if_false if_true condition))
-
-(rule (lower (has_type $I32X4
-                       (x86_blendv condition if_true if_false)))
-      (if-let $true (use_sse41))
-      (x64_blendvps if_false if_true condition))
-
-(rule (lower (has_type $I64X2
-                       (x86_blendv condition if_true if_false)))
-      (if-let $true (use_sse41))
-      (x64_blendvpd if_false if_true condition))
-
-;;;; Rules for `insertlane` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (insertlane vec @ (value_type $I8X16) val (u8_from_uimm8 idx)))
-  (if-let $true (use_sse41))
-  (x64_pinsrb vec val idx))
-(rule 2 (lower (insertlane vec @ (value_type $I8X16) (sinkable_load_exact val) (u8_from_uimm8 idx)))
-  (if-let $true (use_sse41))
-  (x64_pinsrb vec val idx))
-
-;; This lowering is particularly unoptimized and is mostly just here to work
-;; rather than here to be fast. Requiring SSE 4.1 for the above lowering isn't
-;; the end of the world hopefully as that's a pretty old instruction set, so
-;; this is the "simplest" version that works on SSE2 for now.
-;;
-;; This lowering masks the original vector with a constant with all 1s except
-;; for the "hole" where this value will get placed into, meaning the desired
-;; lane is guaranteed as all 0s. Next the `val` is shuffled into this hole with
-;; a few operations:
-;;
-;;  1. The `val` is zero-extended to 32-bits to guarantee the lower 32-bits
-;;     are all defined.
-;;  2. An arithmetic shift-left is used with the low two bits of `n`, the
-;;     desired lane, to move the value into the right position within the 32-bit
-;;     register value.
-;;  3. The 32-bit register is moved with `movd` into an XMM register
-;;  4. The XMM register, where all lanes are 0 except for the first lane which
-;;     has the shifted value, is then shuffled with `pshufd` to move the
-;;     shifted value to the correct and final lane. This uses the upper two
-;;     bits of `n` to index the i32x4 lane that we're targeting.
-;;
-;; This all, laboriously, gets the `val` into the desired lane so it's then
-;; `por`'d with the original vec-with-a-hole to produce the final result of the
-;; insertion.
-(rule (lower (insertlane vec @ (value_type $I8X16) val (u8_from_uimm8 n)))
-      (let ((vec_with_hole Xmm (x64_pand vec (insert_i8x16_lane_hole n)))
-            (val Gpr (x64_movzx (ExtMode.BL) val))
-            (val Gpr (x64_shl $I32 val (Imm8Reg.Imm8 (u8_shl (u8_and n 3) 3))))
-            (val Xmm (x64_movd_to_xmm val))
-            (val_at_hole Xmm (x64_pshufd val (insert_i8x16_lane_pshufd_imm (u8_shr n 2)))))
-        (x64_por vec_with_hole val_at_hole)))
-
-(decl insert_i8x16_lane_hole (u8) VCodeConstant)
-(extern constructor insert_i8x16_lane_hole insert_i8x16_lane_hole)
-(decl insert_i8x16_lane_pshufd_imm (u8) u8)
-(rule (insert_i8x16_lane_pshufd_imm 0) 0b01_01_01_00)
-(rule (insert_i8x16_lane_pshufd_imm 1) 0b01_01_00_01)
-(rule (insert_i8x16_lane_pshufd_imm 2) 0b01_00_01_01)
-(rule (insert_i8x16_lane_pshufd_imm 3) 0b00_01_01_01)
-
-
-;; i16x8.replace_lane
-(rule (lower (insertlane vec @ (value_type $I16X8) val (u8_from_uimm8 idx)))
-  (x64_pinsrw vec val idx))
-(rule 1 (lower (insertlane vec @ (value_type $I16X8) (sinkable_load_exact val) (u8_from_uimm8 idx)))
-  (x64_pinsrw vec val idx))
-
-;; i32x4.replace_lane
-(rule 1 (lower (insertlane vec @ (value_type $I32X4) val (u8_from_uimm8 idx)))
-        (if-let $true (use_sse41))
-        (x64_pinsrd vec val idx))
-
-(rule (lower (insertlane vec @ (value_type $I32X4) val (u8_from_uimm8 0)))
-  (x64_movss_regmove vec (x64_movd_to_xmm val)))
-
-;; tmp    = [ vec[1] vec[0] val[1] val[0] ]
-;; result = [ vec[3] vec[2] tmp[0] tmp[2] ]
-(rule (lower (insertlane vec @ (value_type $I32X4) val (u8_from_uimm8 1)))
-      (let ((val Xmm (x64_movd_to_xmm val))
-            (vec Xmm vec))
-        (x64_shufps (x64_punpcklqdq val vec) vec 0b11_10_00_10)))
-
-;; tmp    = [ vec[0] vec[3] val[0] val[0] ]
-;; result = [ tmp[2] tmp[0] vec[1] vec[0] ]
-(rule (lower (insertlane vec @ (value_type $I32X4) val (u8_from_uimm8 2)))
-      (let ((val Xmm (x64_movd_to_xmm val))
-            (vec Xmm vec))
-        (x64_shufps vec (x64_shufps val vec 0b00_11_00_00) 0b10_00_01_00)))
-
-;; tmp    = [ vec[3] vec[2] val[1] val[0] ]
-;; result = [ tmp[0] tmp[2] vec[1] vec[0] ]
-(rule (lower (insertlane vec @ (value_type $I32X4) val (u8_from_uimm8 3)))
-      (let ((val Xmm (x64_movd_to_xmm val))
-            (vec Xmm vec))
-        (x64_shufps vec (x64_shufps val vec 0b11_10_01_00) 0b00_10_01_00)))
-
-;; i64x2.replace_lane
-(rule 1 (lower (insertlane vec @ (value_type $I64X2) val (u8_from_uimm8 idx)))
-        (if-let $true (use_sse41))
-        (x64_pinsrq vec val idx))
-(rule (lower (insertlane vec @ (value_type $I64X2) val (u8_from_uimm8 0)))
-      (x64_movsd_regmove vec (x64_movq_to_xmm val)))
-(rule (lower (insertlane vec @ (value_type $I64X2) val (u8_from_uimm8 1)))
-      (x64_punpcklqdq vec (x64_movq_to_xmm val)))
-
-;; (i64x2.replace_lane 1) with a splat as source for lane 0 -- we can elide
-;; the splat and just do a move. This turns out to be a common pattern when
-;; constructing an i64x2 out of two i64s.
-(rule 3 (lower (insertlane (has_type $I64X2 (splat lane0))
-                           lane1
-                           (u8_from_uimm8 1)))
-        (if-let $true (use_sse41))
-        (x64_pinsrq (bitcast_gpr_to_xmm 64 lane0) lane1 1))
-
-(rule 1 (lower (insertlane vec @ (value_type $F32X4) (sinkable_load val) (u8_from_uimm8 idx)))
-  (if-let $true (use_sse41))
-  (x64_insertps vec val (sse_insertps_lane_imm idx)))
-(rule (lower (insertlane vec @ (value_type $F32X4) val (u8_from_uimm8 idx)))
-  (f32x4_insertlane vec val idx))
-
-;; Helper function used below for `insertlane` but also here for other
-(decl f32x4_insertlane (Xmm Xmm u8) Xmm)
-
-;; f32x4.replace_lane
-(rule 1 (f32x4_insertlane vec val idx)
-        (if-let $true (use_sse41))
-        (x64_insertps vec val (sse_insertps_lane_imm idx)))
-
-;; External rust code used to calculate the immediate value to `insertps`.
-(decl sse_insertps_lane_imm (u8) u8)
-(extern constructor sse_insertps_lane_imm sse_insertps_lane_imm)
-
-;; f32x4.replace_lane 0
-(rule (f32x4_insertlane vec val 0)
-      (x64_movss_regmove vec val))
-
-;; f32x4.replace_lane 1
-;; tmp    = [ vec[1] vec[0] val[1] val[0] ]
-;; result = [ vec[3] vec[2] tmp[0] tmp[2] ]
-(rule (f32x4_insertlane vec val 1)
-      (let ((tmp Xmm (x64_movlhps val vec)))
-        (x64_shufps tmp vec 0b11_10_00_10)))
-
-;; f32x4.replace_lane 2
-;; tmp    = [ vec[0] vec[3] val[0] val[0] ]
-;; result = [ tmp[2] tmp[0] vec[1] vec[0] ]
-(rule (f32x4_insertlane vec val 2)
-      (let ((tmp Xmm (x64_shufps val vec 0b00_11_00_00)))
-        (x64_shufps vec tmp 0b10_00_01_00)))
-
-;; f32x4.replace_lane 3
-;; tmp    = [ vec[3] vec[2] val[1] val[0] ]
-;; result = [ tmp[0] tmp[2] vec[1] vec[0] ]
-(rule (f32x4_insertlane vec val 3)
-      (let ((tmp Xmm (x64_shufps val vec 0b11_10_01_00)))
-        (x64_shufps vec tmp 0b00_10_01_00)))
-
-;; f64x2.replace_lane 0
-;;
-;; Here the `movsd` instruction is used specifically to specialize moving
-;; into the fist lane where unlike above cases we're not using the lane
-;; immediate as an immediate to the instruction itself.
-(rule (lower (insertlane vec @ (value_type $F64X2) val (u8_from_uimm8 0)))
-      (x64_movsd_regmove vec val))
-
-;; f64x2.replace_lane 1
-;;
-;; Here the `movlhps` instruction is used specifically to specialize moving
-;; into the second lane where unlike above cases we're not using the lane
-;; immediate as an immediate to the instruction itself.
-(rule (lower (insertlane vec @ (value_type $F64X2) val (u8_from_uimm8 1)))
-      (x64_movlhps vec val))
-
-;;;; Rules for `smin`, `smax`, `umin`, `umax` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; `i64` and smaller.
-
-(decl cmp_and_choose (Type CC Value Value) ValueRegs)
-(rule (cmp_and_choose (fits_in_64 ty) cc x y)
-      (let ((size OperandSize (raw_operand_size_of_type ty))
-            ;; We need to put x and y in registers explicitly because
-            ;; we use the values more than once. Hence, even if these
-            ;; are "unique uses" at the CLIF level and would otherwise
-            ;; allow for load-op merging, here we cannot do that.
-            (x_reg Reg x)
-            (y_reg Reg y))
-        (with_flags_reg (x64_cmp size y_reg x_reg)
-                        (cmove ty cc y_reg x_reg))))
-
-(rule -1 (lower (has_type (fits_in_64 ty) (umin x y)))
-      (cmp_and_choose ty (CC.B) x y))
-
-(rule -1 (lower (has_type (fits_in_64 ty) (umax x y)))
-      (cmp_and_choose ty (CC.NB) x y))
-
-(rule -1 (lower (has_type (fits_in_64 ty) (smin x y)))
-      (cmp_and_choose ty (CC.L) x y))
-
-(rule -1 (lower (has_type (fits_in_64 ty) (smax x y)))
-      (cmp_and_choose ty (CC.NL) x y))
-
-;; SSE helpers for determining if single-instruction lowerings are available.
-
-(decl pure has_pmins (Type) bool)
-(rule 1 (has_pmins $I16X8) $true)
-(rule 1 (has_pmins $I64X2) $false)
-(rule (has_pmins _) (use_sse41))
-
-(decl pure has_pmaxs (Type) bool)
-(rule 1 (has_pmaxs $I16X8) $true)
-(rule 1 (has_pmaxs $I64X2) $false)
-(rule (has_pmaxs _) (use_sse41))
-
-(decl pure has_pmaxu (Type) bool)
-(rule 1 (has_pmaxu $I8X16) $true)
-(rule 1 (has_pmaxu $I64X2) $false)
-(rule (has_pmaxu _) (use_sse41))
-
-(decl pure has_pminu (Type) bool)
-(rule 1 (has_pminu $I8X16) $true)
-(rule 1 (has_pminu $I64X2) $false)
-(rule (has_pminu _) (use_sse41))
-
-;; SSE `smax`.
-
-(rule (lower (has_type (ty_vec128 ty) (smax x y)))
-      (lower_vec_smax ty x y))
-
-(decl lower_vec_smax (Type Xmm Xmm) Xmm)
-(rule 1 (lower_vec_smax ty x y)
-        (if-let $true (has_pmaxs ty))
-        (x64_pmaxs ty x y))
-
-(rule (lower_vec_smax ty x y)
-      (let (
-          (x Xmm x)
-          (y Xmm y)
-          (cmp Xmm (x64_pcmpgt ty x y))
-          (x_is_max Xmm (x64_pand cmp x))
-          (y_is_max Xmm (x64_pandn cmp y))
-        )
-        (x64_por x_is_max y_is_max)))
-
-;; SSE `smin`.
-
-(rule 1 (lower (has_type (ty_vec128 ty) (smin x y)))
-        (if-let $true (has_pmins ty))
-        (x64_pmins ty x y))
-
-(rule (lower (has_type (ty_vec128 ty) (smin x y)))
-      (let (
-          (x Xmm x)
-          (y Xmm y)
-          (cmp Xmm (x64_pcmpgt ty y x))
-          (x_is_min Xmm (x64_pand cmp x))
-          (y_is_min Xmm (x64_pandn cmp y))
-        )
-        (x64_por x_is_min y_is_min)))
-
-;; SSE `umax`.
-
-(rule 2 (lower (has_type (ty_vec128 ty) (umax x y)))
-        (if-let $true (has_pmaxu ty))
-        (x64_pmaxu ty x y))
-
-;; If y < x then the saturating subtraction will be zero, otherwise when added
-;; back to x it'll return y.
-(rule 1 (lower (has_type $I16X8 (umax x y)))
-        (let ((x Xmm x))
-          (x64_paddw x (x64_psubusw y x))))
-
-;; Flip the upper bits of each lane so the signed comparison has the same
-;; result as a signed comparison, and then select the results with the output
-;; mask. See `pcmpgt` lowering for info on flipping the upper bit.
-(rule (lower (has_type (ty_vec128 ty) (umax x y)))
-      (let (
-          (x Xmm x)
-          (y Xmm y)
-          (mask Xmm (flip_high_bit_mask ty))
-          (x_masked Xmm (x64_pxor x mask))
-          (y_masked Xmm (x64_pxor y mask))
-          (cmp Xmm (x64_pcmpgt ty x_masked y_masked))
-          (x_is_max Xmm (x64_pand cmp x))
-          (y_is_max Xmm (x64_pandn cmp y))
-        )
-        (x64_por x_is_max y_is_max)))
-
-(decl flip_high_bit_mask (Type) Xmm)
-(rule (flip_high_bit_mask $I16X8)
-      (x64_movdqu_load (emit_u128_le_const 0x8000_8000_8000_8000_8000_8000_8000_8000)))
-(rule (flip_high_bit_mask $I32X4)
-      (x64_movdqu_load (emit_u128_le_const 0x80000000_80000000_80000000_80000000)))
-(rule (flip_high_bit_mask $I64X2)
-      (x64_movdqu_load (emit_u128_le_const 0x8000000000000000_8000000000000000)))
-
-;; SSE `umin`.
-
-(rule 2 (lower (has_type (ty_vec128 ty) (umin x y)))
-        (if-let $true (has_pminu ty))
-        (x64_pminu ty x y))
-
-;; If x < y then the saturating subtraction will be 0. Otherwise if x > y then
-;; the saturated result, when subtracted again, will go back to `y`.
-(rule 1 (lower (has_type $I16X8 (umin x y)))
-        (let ((x Xmm x))
-          (x64_psubw x (x64_psubusw x y))))
-
-;; Same as `umax`, and see `pcmpgt` for docs on flipping the upper bit.
-(rule (lower (has_type (ty_vec128 ty) (umin x y)))
-      (let (
-          (x Xmm x)
-          (y Xmm y)
-          (mask Xmm (flip_high_bit_mask ty))
-          (x_masked Xmm (x64_pxor x mask))
-          (y_masked Xmm (x64_pxor y mask))
-          (cmp Xmm (x64_pcmpgt ty y_masked x_masked))
-          (x_is_max Xmm (x64_pand cmp x))
-          (y_is_max Xmm (x64_pandn cmp y))
-        )
-        (x64_por x_is_max y_is_max)))
-
-;;;; Rules for `trap` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (trap code))
-      (side_effect (x64_ud2 code)))
-
-;;;; Rules for `uadd_overflow_trap` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (fits_in_64 ty) (uadd_overflow_trap a b tc)))
-      (with_flags
-        (x64_add_with_flags_paired ty a b)
-        (trap_if (CC.B) tc)))
-
-;; Handle lhs immediates/sinkable loads in addition to the automatic rhs
-;; handling of above.
-
-(rule 1 (lower (has_type (fits_in_64 ty)
-                         (uadd_overflow_trap (simm32_from_value a) b tc)))
-      (with_flags
-        (x64_add_with_flags_paired ty b a)
-        (trap_if (CC.B) tc)))
-
-(rule 2 (lower (has_type (fits_in_64 ty)
-                         (uadd_overflow_trap (sinkable_load a) b tc)))
-      (with_flags
-        (x64_add_with_flags_paired ty b a)
-        (trap_if (CC.B) tc)))
-
-;;;; Rules for `return` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; N.B.: the Ret itself is generated by the ABI.
-(rule (lower (return args))
-      (lower_return args))
-
-;;;; Rules for `icmp` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule -2 (lower (icmp cc a @ (value_type (fits_in_64 ty)) b))
-      (lower_icmp_bool (emit_cmp cc a b)))
-
-(rule -1 (lower (icmp cc a @ (value_type $I128) b))
-      (lower_icmp_bool (emit_cmp cc a b)))
-
-;; Peephole optimization for `x < 0`, when x is a signed 64 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedLessThan) x @ (value_type $I64) (u64_from_iconst 0))))
-      (x64_shr $I64 x (Imm8Reg.Imm8 63)))
-
-;; Peephole optimization for `0 > x`, when x is a signed 64 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedGreaterThan) (u64_from_iconst 0) x @ (value_type $I64))))
-      (x64_shr $I64 x (Imm8Reg.Imm8 63)))
-
-;; Peephole optimization for `0 <= x`, when x is a signed 64 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedLessThanOrEqual) (u64_from_iconst 0) x @ (value_type $I64))))
-      (x64_shr $I64 (x64_not $I64 x) (Imm8Reg.Imm8 63)))
-
-;; Peephole optimization for `x >= 0`, when x is a signed 64 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedGreaterThanOrEqual) x @ (value_type $I64) (u64_from_iconst 0))))
-      (x64_shr $I64 (x64_not $I64 x) (Imm8Reg.Imm8 63)))
-
-;; Peephole optimization for `x < 0`, when x is a signed 32 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedLessThan) x @ (value_type $I32) (u64_from_iconst 0))))
-      (x64_shr $I32 x (Imm8Reg.Imm8 31)))
-
-;; Peephole optimization for `0 > x`, when x is a signed 32 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedGreaterThan) (u64_from_iconst 0) x @ (value_type $I32))))
-      (x64_shr $I32 x (Imm8Reg.Imm8 31)))
-
-;; Peephole optimization for `0 <= x`, when x is a signed 32 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedLessThanOrEqual) (u64_from_iconst 0) x @ (value_type $I32))))
-      (x64_shr $I32 (x64_not $I64 x) (Imm8Reg.Imm8 31)))
-
-;; Peephole optimization for `x >= 0`, when x is a signed 32 bit value
-(rule 2 (lower (has_type $I8 (icmp (IntCC.SignedGreaterThanOrEqual) x @ (value_type $I32) (u64_from_iconst 0))))
-      (x64_shr $I32 (x64_not $I64 x) (Imm8Reg.Imm8 31)))
-
-;; For XMM-held values, we lower to `PCMP*` instructions, sometimes more than
-;; one. To note: what is different here about the output values is that each
-;; lane will be filled with all 1s or all 0s according to the comparison,
-;; whereas for GPR-held values, the result will be simply 0 or 1 (upper bits
-;; unset).
-(rule (lower (icmp (IntCC.Equal) a @ (value_type (ty_vec128 ty)) b))
-      (x64_pcmpeq ty a b))
-
-;; To lower a not-equals comparison, we perform an equality comparison
-;; (PCMPEQ*) and then invert the bits (PXOR with all 1s).
-(rule (lower (icmp (IntCC.NotEqual) a @ (value_type (ty_vec128 ty)) b))
-      (let ((checked Xmm (x64_pcmpeq ty a b))
-            (all_ones Xmm (vector_all_ones)))
-           (x64_pxor checked all_ones)))
-
-;; SSE `sgt`
-
-(rule (lower (icmp (IntCC.SignedGreaterThan) a @ (value_type (ty_vec128 ty)) b))
-      (x64_pcmpgt ty a b))
-
-;; SSE `slt`
-
-(rule (lower (icmp (IntCC.SignedLessThan) a @ (value_type (ty_vec128 ty)) b))
-      (x64_pcmpgt ty b a))
-
-;; SSE `ugt`
-
-;; N.B.: we must manually prevent load coalescing operands; the
-;; register allocator gets confused otherwise.
-(rule 1 (lower (icmp (IntCC.UnsignedGreaterThan) a @ (value_type (ty_vec128 ty)) b))
-        (if-let $true (has_pmaxu ty))
-        (let ((a Xmm a)
-              (b Xmm b)
-              (max Xmm (x64_pmaxu ty a b))
-              (eq Xmm (x64_pcmpeq ty max b)))
-             (x64_pxor eq (vector_all_ones))))
-
-;; Flip the upper bit of each lane so the result of a signed comparison is the
-;; same as the result of an unsigned comparison (see docs on `pcmpgt` for more)
-(rule (lower (icmp (IntCC.UnsignedGreaterThan) a @ (value_type (ty_vec128 ty)) b))
-      (let ((mask Xmm (flip_high_bit_mask ty))
-            (a_masked Xmm (x64_pxor a mask))
-            (b_masked Xmm (x64_pxor b mask)))
-           (x64_pcmpgt ty a_masked b_masked)))
-
-;; SSE `ult`
-
-(rule 1 (lower (icmp (IntCC.UnsignedLessThan) a @ (value_type (ty_vec128 ty)) b))
-        (if-let $true (has_pminu ty))
-        ;; N.B.: see note above.
-        (let ((a Xmm a)
-              (b Xmm b)
-              (min Xmm (x64_pminu ty a b))
-              (eq Xmm (x64_pcmpeq ty min b)))
-             (x64_pxor eq (vector_all_ones))))
-
-;; Flip the upper bit of `a` and `b` so the signed comparison result will
-;; be the same as the unsigned comparison result (see docs on `pcmpgt` for more).
-(rule (lower (icmp (IntCC.UnsignedLessThan) a @ (value_type (ty_vec128 ty)) b))
-      (let ((mask Xmm (flip_high_bit_mask ty))
-            (a_masked Xmm (x64_pxor a mask))
-            (b_masked Xmm (x64_pxor b mask)))
-           (x64_pcmpgt ty b_masked a_masked)))
-
-;; SSE `sge`
-
-;; Use `pmaxs*` and compare the result to `a` to see if it's `>= b`.
-(rule 1 (lower (icmp (IntCC.SignedGreaterThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-        (if-let $true (has_pmaxs ty))
-        (x64_pcmpeq ty a (x64_pmaxs ty a b)))
-
-;; Without `pmaxs*` use a `pcmpgt*` with reversed operands and invert the
-;; result.
-(rule (lower (icmp (IntCC.SignedGreaterThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_pxor (x64_pcmpgt ty b a) (vector_all_ones)))
-
-;; SSE `sle`
-
-;; With `pmins*` use that and compare the result to `a`.
-(rule 1 (lower (icmp (IntCC.SignedLessThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-        (if-let $true (has_pmins ty))
-        (x64_pcmpeq ty a (x64_pmins ty a b)))
-
-;; Without `pmins*` perform a greater-than test and invert the result.
-(rule (lower (icmp (IntCC.SignedLessThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_pxor (x64_pcmpgt ty a b) (vector_all_ones)))
-
-;; SSE `uge`
-
-(rule 2 (lower (icmp (IntCC.UnsignedGreaterThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-        (if-let $true (has_pmaxu ty))
-        (x64_pcmpeq ty a (x64_pmaxu ty a b)))
-
-;; Perform a saturating subtract of `a` from `b` and if the result is zero then
-;; `a` is greater or equal.
-(rule 1 (lower (icmp (IntCC.UnsignedGreaterThanOrEqual) a @ (value_type $I16X8) b))
-         (x64_pcmpeqw (x64_psubusw b a) (xmm_zero $I16X8)))
-
-;; Flip the upper bit of each lane so the signed comparison is the same as
-;; an unsigned one and then invert the result. See docs on `pcmpgt` for why
-;; flipping the upper bit works.
-(rule (lower (icmp (IntCC.UnsignedGreaterThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (let (
-          (mask Xmm (flip_high_bit_mask ty))
-          (a_masked Xmm (x64_pxor a mask))
-          (b_masked Xmm (x64_pxor b mask))
-          (cmp Xmm (x64_pcmpgt ty b_masked a_masked))
-        )
-        (x64_pxor cmp (vector_all_ones))))
-
-;; SSE `ule`
-
-(rule 2 (lower (icmp (IntCC.UnsignedLessThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-        (if-let $true (has_pminu ty))
-        (x64_pcmpeq ty a (x64_pminu ty a b)))
-
-;; A saturating subtraction will produce zeros if `a` is less than `b`, so
-;; compare that result to an all-zeros result to figure out lanes of `a` that
-;; are <= to the lanes in `b`
-(rule 1 (lower (icmp (IntCC.UnsignedLessThanOrEqual) a @ (value_type $I16X8) b))
-        (let ((zeros_if_a_is_min Xmm (x64_psubusw a b)))
-            (x64_pcmpeqw zeros_if_a_is_min (xmm_zero $I8X16))))
-
-;; Flip the upper bit of each lane in `a` and `b` so a signed comparison
-;; produces the same result as an unsigned comparison. Then test test for `gt`
-;; and invert the result to get the `le` that is desired here. See docs on
-;; `pcmpgt` for why flipping the upper bit works.
-(rule (lower (icmp (IntCC.UnsignedLessThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (let (
-          (mask Xmm (flip_high_bit_mask ty))
-          (a_masked Xmm (x64_pxor a mask))
-          (b_masked Xmm (x64_pxor b mask))
-          (cmp Xmm (x64_pcmpgt ty a_masked b_masked))
-        )
-        (x64_pxor cmp (vector_all_ones))))
-
-;;;; Rules for `fcmp` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; CLIF's `fcmp` instruction always operates on XMM registers--both scalar and
-;; vector. For the scalar versions, we use the flag-setting behavior of the
-;; `UCOMIS*` instruction to `SETcc` a 0 or 1 in a GPR register. Note that CLIF's
-;; `select` uses the same kind of flag-setting behavior but chooses values other
-;; than 0 or 1.
-;;
-;; Checking the result of `UCOMIS*` is unfortunately difficult in some cases
-;; because we do not have `SETcc` instructions that explicitly check
-;; simultaneously for the condition (i.e., `eq`, `le`, `gt`, etc.) *and*
-;; orderedness. Instead, we must check the flags multiple times. The UCOMIS*
-;; documentation (see Intel's Software Developer's Manual, volume 2, chapter 4)
-;; is helpful:
-;;  - unordered assigns    Z = 1, P = 1, C = 1
-;;  - greater than assigns Z = 0, P = 0, C = 0
-;;  - less than assigns    Z = 0, P = 0, C = 1
-;;  - equal assigns        Z = 1, P = 0, C = 0
-
-(rule -1 (lower (fcmp cc a @ (value_type (ty_scalar_float ty)) b))
-      (lower_fcmp_bool (emit_fcmp cc a b)))
-
-;; For vector lowerings, we use `CMPP*` instructions with a 3-bit operand that
-;; determines the comparison to make. Note that comparisons that succeed will
-;; fill the lane with 1s; comparisons that do not will fill the lane with 0s.
-
-(rule (lower (fcmp (FloatCC.Equal) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.Equal)))
-(rule (lower (fcmp (FloatCC.NotEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.NotEqual)))
-(rule (lower (fcmp (FloatCC.LessThan) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.LessThan)))
-(rule (lower (fcmp (FloatCC.LessThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.LessThanOrEqual)))
-(rule (lower (fcmp (FloatCC.Ordered) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.Ordered)))
-(rule (lower (fcmp (FloatCC.Unordered) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.Unordered)))
-(rule (lower (fcmp (FloatCC.UnorderedOrGreaterThan) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.UnorderedOrGreaterThan)))
-(rule (lower (fcmp (FloatCC.UnorderedOrGreaterThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty a b (FcmpImm.UnorderedOrGreaterThanOrEqual)))
-
-;; Some vector lowerings rely on flipping the operands and using a reversed
-;; comparison code.
-
-(rule (lower (fcmp (FloatCC.GreaterThan) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty b a (FcmpImm.LessThan)))
-(rule (lower (fcmp (FloatCC.GreaterThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty b a (FcmpImm.LessThanOrEqual)))
-(rule (lower (fcmp (FloatCC.UnorderedOrLessThan) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty b a (FcmpImm.UnorderedOrGreaterThan)))
-(rule (lower (fcmp (FloatCC.UnorderedOrLessThanOrEqual) a @ (value_type (ty_vec128 ty)) b))
-      (x64_cmpp ty b a (FcmpImm.UnorderedOrGreaterThanOrEqual)))
-
-;; Some vector lowerings are simply not supported for certain codes:
-;; - FloatCC::OrderedNotEqual
-;; - FloatCC::UnorderedOrEqual
-
-;;;; Rules for `select` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; When a `select` has an `fcmp` as a condition then rely on `emit_fcmp` to
-;; figure out how to perform the comparison.
-;;
-;; Note, though, that the `FloatCC.Equal` requires an "and" to happen for two
-;; condition codes which isn't the easiest thing to lower to a `cmove`
-;; instruction. For this reason a `select (fcmp eq ..) ..` is instead
-;; flipped around to be `select (fcmp ne ..) ..` with all operands reversed.
-;; This will produce a `FcmpCondResult.OrCondition` which is easier to codegen
-;; for.
-(rule (lower (has_type ty (select (maybe_uextend (fcmp cc a b)) x y)))
-      (lower_select_fcmp ty (emit_fcmp cc a b) x y))
-(rule 1 (lower (has_type ty (select (maybe_uextend (fcmp (FloatCC.Equal) a b)) x y)))
-        (lower_select_fcmp ty (emit_fcmp (FloatCC.NotEqual) a b) y x))
-
-(decl lower_select_fcmp (Type FcmpCondResult Value Value) InstOutput)
-(rule (lower_select_fcmp ty (FcmpCondResult.Condition flags cc) x y)
-      (with_flags flags (cmove_from_values ty cc x y)))
-(rule (lower_select_fcmp ty (FcmpCondResult.OrCondition flags cc1 cc2) x y)
-      (with_flags flags (cmove_or_from_values ty cc1 cc2 x y)))
-
-;; We also can lower `select`s that depend on an `icmp` test, but more simply
-;; than the `fcmp` variants above. In these cases, we lower to a `CMP`
-;; instruction plus a `CMOV`; recall that `cmove_from_values` here may emit more
-;; than one instruction for certain types (e.g., XMM-held, I128).
-
-(rule (lower (has_type ty (select (maybe_uextend (icmp cc a @ (value_type (fits_in_64 a_ty)) b)) x y)))
-      (lower_select_icmp ty (emit_cmp cc a b) x y))
-
-;; Finally, we lower `select` from a condition value `c`. These rules are meant
-;; to be the final, default lowerings if no other patterns matched above.
-
-(rule -1 (lower (has_type ty (select c @ (value_type (fits_in_64 a_ty)) x y)))
-      (let ((size OperandSize (raw_operand_size_of_type a_ty))
-            ;; N.B.: disallow load-op fusion, see above. TODO:
-            ;; https://github.com/bytecodealliance/wasmtime/issues/3953.
-            (gpr_c Gpr (put_in_gpr c)))
-           (with_flags (x64_test size gpr_c gpr_c) (cmove_from_values ty (CC.NZ) x y))))
-
-(rule -2 (lower (has_type ty (select c @ (value_type $I128) x y)))
-      (let ((cond_result IcmpCondResult (cmp_zero_i128 (CC.Z) c)))
-        (select_icmp cond_result x y)))
-
-(decl lower_select_icmp (Type IcmpCondResult Value Value) InstOutput)
-(rule (lower_select_icmp ty (IcmpCondResult.Condition flags cc) x y)
-      (with_flags flags (cmove_from_values ty cc x y)))
-
-;; Specializations for floating-point compares to generate a `mins*` or a
-;; `maxs*` instruction. These are equivalent to the "pseudo-m{in,ax}"
-;; specializations for vectors.
-(rule 2 (lower (has_type $F32 (select (maybe_uextend (fcmp (FloatCC.LessThan) x y)) x y)))
-        (x64_minss x y))
-(rule 2 (lower (has_type $F64 (select (maybe_uextend (fcmp (FloatCC.LessThan) x y)) x y)))
-        (x64_minsd x y))
-(rule 3 (lower (has_type $F32 (select (maybe_uextend (fcmp (FloatCC.LessThan) y x)) x y)))
-        (x64_maxss x y))
-(rule 3 (lower (has_type $F64 (select (maybe_uextend (fcmp (FloatCC.LessThan) y x)) x y)))
-        (x64_maxsd x y))
-
-;; Rules for `clz` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 2 (lower (has_type (ty_32_or_64 ty) (clz src)))
-      (do_clz ty ty src))
-
-(rule 1 (lower (has_type (ty_8_or_16 ty) (clz src)))
-      (let ((extended Gpr (extend_to_gpr src $I64 (ExtendKind.Zero)))
-            (clz Gpr (do_clz $I64 $I64 extended)))
-        (x64_sub $I64 clz (RegMemImm.Imm (u32_sub 64 (ty_bits ty))))))
-
-
-(rule 0 (lower
-       (has_type $I128
-                 (clz src)))
-      (let ((upper Gpr (do_clz $I64 $I64 (value_regs_get_gpr src 1)))
-            (lower Gpr (x64_add $I64
-                            (do_clz $I64 $I64 (value_regs_get_gpr src 0))
-                            (RegMemImm.Imm 64)))
-            (result_lo Gpr
-              (with_flags_reg
-               (x64_cmp_imm (OperandSize.Size64) upper 64)
-               (cmove $I64 (CC.NZ) upper lower))))
-        (value_regs result_lo (imm $I64 0))))
-
-;; Implementation helper for clz; operates on 32 or 64-bit units.
-(decl do_clz (Type Type Gpr) Gpr)
-
-;; If available, we can use a plain lzcnt instruction here. Note no
-;; special handling is required for zero inputs, because the machine
-;; instruction does what the CLIF expects for zero, i.e. it returns
-;; zero.
-(rule 1 (do_clz ty orig_ty src)
-      (if-let $true (use_lzcnt))
-      (x64_lzcnt ty src))
-
-(rule 0 (do_clz ty orig_ty src)
-      (let ((highest_bit_index Reg (bsr_or_else ty src (imm_i64 $I64 -1)))
-            (bits_minus_1 Reg (imm ty (u64_sub (ty_bits_u64 orig_ty) 1))))
-        (x64_sub ty bits_minus_1 highest_bit_index)))
-
-;; Rules for `ctz` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 2 (lower (has_type (ty_32_or_64 ty) (ctz src)))
-      (do_ctz ty ty src))
-
-(rule 1 (lower (has_type (ty_8_or_16 ty) (ctz src)))
-      (let ((extended Gpr (extend_to_gpr src $I32 (ExtendKind.Zero)))
-            (stopbit Gpr (x64_or $I32 extended (RegMemImm.Imm (u32_shl 1 (ty_bits ty))))))
-        (do_ctz $I32 ty stopbit)))
-
-(rule 0 (lower
-       (has_type $I128
-                 (ctz src)))
-      (let ((lower Gpr (do_ctz $I64 $I64 (value_regs_get_gpr src 0)))
-            (upper Gpr (x64_add $I64
-                            (do_ctz $I64 $I64 (value_regs_get_gpr src 1))
-                            (RegMemImm.Imm 64)))
-            (result_lo Gpr
-              (with_flags_reg
-               (x64_cmp_imm (OperandSize.Size64) lower 64)
-               (cmove $I64 (CC.Z) upper lower))))
-        (value_regs result_lo (imm $I64 0))))
-
-(decl do_ctz (Type Type Gpr) Gpr)
-
-;; Analogous to `clz` cases above, but using mirror instructions
-;; (tzcnt vs lzcnt, bsf vs bsr).
-(rule 1 (do_ctz ty orig_ty src)
-      (if-let $true (use_bmi1))
-      (x64_tzcnt ty src))
-
-(rule 0 (do_ctz ty orig_ty src)
-      (bsf_or_else ty src (imm $I64 (ty_bits_u64 orig_ty))))
-
-;; Rules for `popcnt` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 4 (lower (has_type (ty_32_or_64 ty) (popcnt src)))
-      (if-let $true (use_popcnt))
-      (x64_popcnt ty src))
-
-(rule 3 (lower (has_type (ty_8_or_16 ty) (popcnt src)))
-      (if-let $true (use_popcnt))
-      (x64_popcnt $I32 (extend_to_gpr src $I32 (ExtendKind.Zero))))
-
-(rule 1 (lower (has_type $I128 (popcnt src)))
-      (if-let $true (use_popcnt))
-      (let ((lo_count Gpr (x64_popcnt $I64 (value_regs_get_gpr src 0)))
-            (hi_count Gpr (x64_popcnt $I64 (value_regs_get_gpr src 1))))
-        (value_regs (x64_add $I64 lo_count hi_count) (imm $I64 0))))
-
-(rule -1 (lower
-       (has_type (ty_32_or_64 ty)
-                 (popcnt src)))
-      (do_popcnt ty src))
-
-(rule -2 (lower
-       (has_type (ty_8_or_16 ty)
-                 (popcnt src)))
-      (do_popcnt $I32 (extend_to_gpr src $I32 (ExtendKind.Zero))))
-
-(rule (lower
-       (has_type $I128
-                 (popcnt src)))
-      (let ((lo_count Gpr (do_popcnt $I64 (value_regs_get_gpr src 0)))
-            (hi_count Gpr (do_popcnt $I64 (value_regs_get_gpr src 1))))
-        (value_regs (x64_add $I64 lo_count hi_count) (imm $I64 0))))
-
-;; Implementation of popcount when we don't nave a native popcount
-;; instruction.
-(decl do_popcnt (Type Gpr) Gpr)
-(rule (do_popcnt $I64 src)
-      (let ((shifted1 Gpr (x64_shr $I64 src (Imm8Reg.Imm8 1)))
-            (sevens Gpr (imm $I64 0x7777777777777777))
-            (masked1 Gpr (x64_and $I64 shifted1 sevens))
-            ;; diff1 := src - ((src >> 1) & 0b0111_0111_0111...)
-            (diff1 Gpr (x64_sub $I64 src masked1))
-            (shifted2 Gpr (x64_shr $I64 masked1 (Imm8Reg.Imm8 1)))
-            (masked2 Gpr (x64_and $I64 shifted2 sevens))
-            ;; diff2 := diff1 - ((diff1 >> 1) & 0b0111_0111_0111...)
-            (diff2 Gpr (x64_sub $I64 diff1 masked2))
-            (shifted3 Gpr (x64_shr $I64 masked2 (Imm8Reg.Imm8 1)))
-            (masked3 Gpr (x64_and $I64 shifted3 sevens))
-            ;; diff3 := diff2 - ((diff2 >> 1) & 0b0111_0111_0111...)
-            ;;
-            ;; At this point, each nibble of diff3 is the popcount of
-            ;; that nibble. This works because at each step above, we
-            ;; are basically subtracting floor(value / 2) from the
-            ;; running value; the leftover remainder is 1 if the LSB
-            ;; was 1. After three steps, we have (nibble / 8) -- 0 or
-            ;; 1 for the MSB of the nibble -- plus three possible
-            ;; additions for the three other bits.
-            (diff3 Gpr (x64_sub $I64 diff2 masked3))
-            ;; Add the two nibbles of each byte together.
-            (sum1 Gpr (x64_add $I64
-                           (x64_shr $I64 diff3 (Imm8Reg.Imm8 4))
-                           diff3))
-            ;; Mask the above sum to have the popcount for each byte
-            ;; in the lower nibble of that byte.
-            (ofof Gpr (imm $I64 0x0f0f0f0f0f0f0f0f))
-            (masked4 Gpr (x64_and $I64 sum1 ofof))
-            (ones Gpr (imm $I64 0x0101010101010101))
-            ;; Use a multiply to sum all of the bytes' popcounts into
-            ;; the top byte. Consider the binomial expansion for the
-            ;; top byte: it is the sum of the bytes (masked4 >> 56) *
-            ;; 0x01 + (masked4 >> 48) * 0x01 + (masked4 >> 40) * 0x01
-            ;; + ... + (masked4 >> 0).
-            (mul Gpr (x64_imul $I64 masked4 ones))
-            ;; Now take that top byte and return it as the popcount.
-            (final Gpr (x64_shr $I64 mul (Imm8Reg.Imm8 56))))
-        final))
-
-;; This is the 32-bit version of the above; the steps for each nibble
-;; are the same, we just use constants half as wide.
-(rule (do_popcnt $I32 src)
-      (let ((shifted1 Gpr (x64_shr $I32 src (Imm8Reg.Imm8 1)))
-            (sevens Gpr (imm $I32 0x77777777))
-            (masked1 Gpr (x64_and $I32 shifted1 sevens))
-            (diff1 Gpr (x64_sub $I32 src masked1))
-            (shifted2 Gpr (x64_shr $I32 masked1 (Imm8Reg.Imm8 1)))
-            (masked2 Gpr (x64_and $I32 shifted2 sevens))
-            (diff2 Gpr (x64_sub $I32 diff1 masked2))
-            (shifted3 Gpr (x64_shr $I32 masked2 (Imm8Reg.Imm8 1)))
-            (masked3 Gpr (x64_and $I32 shifted3 sevens))
-            (diff3 Gpr (x64_sub $I32 diff2 masked3))
-            (sum1 Gpr (x64_add $I32
-                           (x64_shr $I32 diff3 (Imm8Reg.Imm8 4))
-                           diff3))
-            (masked4 Gpr (x64_and $I32 sum1 (RegMemImm.Imm 0x0f0f0f0f)))
-            (mul Gpr (x64_imul_imm $I32 masked4 0x01010101))
-            (final Gpr (x64_shr $I32 mul (Imm8Reg.Imm8 24))))
-        final))
-
-
-(rule 2 (lower (has_type $I8X16 (popcnt src)))
-      (if-let $true (use_avx512vl))
-      (if-let $true (use_avx512bitalg))
-      (x64_vpopcntb src))
-
-
-;; For SSE 4.2 we use Mula's algorithm (https://arxiv.org/pdf/1611.07612.pdf):
-;;
-;; __m128i count_bytes ( __m128i v) {
-;;     __m128i lookup = _mm_setr_epi8(0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4);
-;;     __m128i low_mask = _mm_set1_epi8 (0x0f);
-;;     __m128i lo = _mm_and_si128 (v, low_mask);
-;;     __m128i hi = _mm_and_si128 (_mm_srli_epi16 (v, 4), low_mask);
-;;     __m128i cnt1 = _mm_shuffle_epi8 (lookup, lo);
-;;     __m128i cnt2 = _mm_shuffle_epi8 (lookup, hi);
-;;     return _mm_add_epi8 (cnt1, cnt2);
-;; }
-;;
-;; Details of the above algorithm can be found in the reference noted above, but the basics
-;; are to create a lookup table that pre populates the popcnt values for each number [0,15].
-;; The algorithm uses shifts to isolate 4 bit sections of the vector, pshufb as part of the
-;; lookup process, and adds together the results.
-;;
-;; __m128i lookup = _mm_setr_epi8(0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4);
-
-
-(rule 1 (lower (has_type $I8X16 (popcnt src)))
-      (if-let $true (use_ssse3))
-      (let ((low_mask XmmMem (emit_u128_le_const 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f))
-            (low_nibbles Xmm (sse_and $I8X16 src low_mask))
-            ;; Note that this is a 16x8 shift, but that's OK; we mask
-            ;; off anything that traverses from one byte to the next
-            ;; with the low_mask below.
-            (shifted_src Xmm (x64_psrlw src (xmi_imm 4)))
-            (high_nibbles Xmm (sse_and $I8X16 shifted_src low_mask))
-            (lookup Xmm (x64_xmm_load_const $I8X16
-              (emit_u128_le_const 0x04030302_03020201_03020201_02010100)))
-            (bit_counts_low Xmm (x64_pshufb lookup low_nibbles))
-            (bit_counts_high Xmm (x64_pshufb lookup high_nibbles)))
-        (x64_paddb bit_counts_low bit_counts_high)))
-
-;; A modified version of the popcnt method from Hacker's Delight.
-(rule (lower (has_type $I8X16 (popcnt src)))
-      (let ((mask1 XmmMem (emit_u128_le_const 0x77777777777777777777777777777777))
-            (src Xmm src)
-            (shifted Xmm (x64_pand (x64_psrlq src (xmi_imm 1)) mask1))
-            (src Xmm (x64_psubb src shifted))
-            (shifted Xmm (x64_pand (x64_psrlq shifted (xmi_imm 1)) mask1))
-            (src Xmm (x64_psubb src shifted))
-            (shifted Xmm (x64_pand (x64_psrlq shifted (xmi_imm 1)) mask1))
-            (src Xmm (x64_psubb src shifted))
-            (src Xmm (x64_paddb src (x64_psrlw src (xmi_imm 4)))))
-        (x64_pand src (emit_u128_le_const 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f))))
-
-;; Rules for `bitrev` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I8 (bitrev src)))
-      (do_bitrev8 $I32 src))
-
-(rule (lower (has_type $I16 (bitrev src)))
-      (do_bitrev16 $I32 src))
-
-(rule (lower (has_type $I32 (bitrev src)))
-      (do_bitrev32 $I32 src))
-
-(rule (lower (has_type $I64 (bitrev src)))
-      (do_bitrev64 $I64 src))
-
-(rule (lower (has_type $I128 (bitrev src)))
-      (value_regs
-       (do_bitrev64 $I64 (value_regs_get_gpr src 1))
-       (do_bitrev64 $I64 (value_regs_get_gpr src 0))))
-
-(decl do_bitrev8 (Type Gpr) Gpr)
-(rule (do_bitrev8 ty src)
-      (let ((tymask u64 (ty_mask ty))
-            (mask1 Gpr (imm ty (u64_and tymask 0x5555555555555555)))
-            (lo1 Gpr (x64_and ty src mask1))
-            (hi1 Gpr (x64_and ty (x64_shr ty src (Imm8Reg.Imm8 1)) mask1))
-            (swap1 Gpr (x64_or ty
-                           (x64_shl ty lo1 (Imm8Reg.Imm8 1))
-                           hi1))
-            (mask2 Gpr (imm ty (u64_and tymask 0x3333333333333333)))
-            (lo2 Gpr (x64_and ty swap1 mask2))
-            (hi2 Gpr (x64_and ty (x64_shr ty swap1 (Imm8Reg.Imm8 2)) mask2))
-            (swap2 Gpr (x64_or ty
-                           (x64_shl ty lo2 (Imm8Reg.Imm8 2))
-                           hi2))
-            (mask4 Gpr (imm ty (u64_and tymask 0x0f0f0f0f0f0f0f0f)))
-            (lo4 Gpr (x64_and ty swap2 mask4))
-            (hi4 Gpr (x64_and ty (x64_shr ty swap2 (Imm8Reg.Imm8 4)) mask4))
-            (swap4 Gpr (x64_or ty
-                           (x64_shl ty lo4 (Imm8Reg.Imm8 4))
-                           hi4)))
-        swap4))
-
-(decl do_bitrev16 (Type Gpr) Gpr)
-(rule (do_bitrev16 ty src)
-      (let ((src_ Gpr (do_bitrev8 ty src))
-            (tymask u64 (ty_mask ty))
-            (mask8 Gpr (imm ty (u64_and tymask 0x00ff00ff00ff00ff)))
-            (lo8 Gpr (x64_and ty src_ mask8))
-            (hi8 Gpr (x64_and ty (x64_shr ty src_ (Imm8Reg.Imm8 8)) mask8))
-            (swap8 Gpr (x64_or ty
-                           (x64_shl ty lo8 (Imm8Reg.Imm8 8))
-                           hi8)))
-        swap8))
-
-(decl do_bitrev32 (Type Gpr) Gpr)
-(rule (do_bitrev32 ty src)
-      (let ((src_ Gpr (do_bitrev16 ty src))
-            (tymask u64 (ty_mask ty))
-            (mask16 Gpr (imm ty (u64_and tymask 0x0000ffff0000ffff)))
-            (lo16 Gpr (x64_and ty src_ mask16))
-            (hi16 Gpr (x64_and ty (x64_shr ty src_ (Imm8Reg.Imm8 16)) mask16))
-            (swap16 Gpr (x64_or ty
-                            (x64_shl ty lo16 (Imm8Reg.Imm8 16))
-                            hi16)))
-        swap16))
-
-(decl do_bitrev64 (Type Gpr) Gpr)
-(rule (do_bitrev64 ty @ $I64 src)
-      (let ((src_ Gpr (do_bitrev32 ty src))
-            (mask32 Gpr (imm ty 0xffffffff))
-            (lo32 Gpr (x64_and ty src_ mask32))
-            (hi32 Gpr (x64_shr ty src_ (Imm8Reg.Imm8 32)))
-            (swap32 Gpr (x64_or ty
-                            (x64_shl ty lo32 (Imm8Reg.Imm8 32))
-                            hi32)))
-        swap32))
-
-;; Rules for `bswap` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; x64 bswap instruction is only for 32- or 64-bit swaps
-;; implement the 16-bit swap as a rotl by 8
-(rule (lower (has_type $I16 (bswap src)))
-      (x64_rotl $I16 src (Imm8Reg.Imm8 8)))
-
-(rule (lower (has_type $I32 (bswap src)))
-      (x64_bswap $I32 src))
-
-(rule (lower (has_type $I64 (bswap src)))
-      (x64_bswap $I64 src))
-
-(rule (lower (has_type $I128 (bswap src)))
-      (value_regs
-       (x64_bswap $I64 (value_regs_get_gpr src 1))
-       (x64_bswap $I64 (value_regs_get_gpr src 0))))
-
-;; Rules for `is_null` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Null references are represented by the constant value `0`.
-(rule (lower (is_null src @ (value_type $R64)))
-      (with_flags
-       (x64_cmp_imm (OperandSize.Size64) src 0)
-       (x64_setcc (CC.Z))))
-
-;; Rules for `is_invalid` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Invalid references are represented by the constant value `-1`.
-(rule (lower (is_invalid src @ (value_type $R64)))
-      (with_flags
-       (x64_cmp_imm (OperandSize.Size64) src 0xffffffff)  ;; simm32 0xffff_ffff is sign-extended to -1.
-       (x64_setcc (CC.Z))))
-
-
-;; Rules for `uextend` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; I{8,16,32,64} -> I128.
-(rule (lower (has_type $I128 (uextend src)))
-      (value_regs (extend_to_gpr src $I64 (ExtendKind.Zero)) (imm $I64 0)))
-
-;; I{8,16,32} -> I64.
-(rule (lower (has_type $I64 (uextend src)))
-      (extend_to_gpr src $I64 (ExtendKind.Zero)))
-
-;; I{8,16} -> I32
-;; I8 -> I16
-(rule -1 (lower (has_type (fits_in_32 _) (uextend src)))
-         (extend_to_gpr src $I32 (ExtendKind.Zero)))
-
-;; Rules for `sextend` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; I{8,16,32} -> I128.
-;;
-;; Produce upper 64 bits sign-extended from lower 64: shift right by
-;; 63 bits to spread the sign bit across the result.
-(rule (lower (has_type $I128 (sextend src)))
-      (let ((lo Gpr (extend_to_gpr src $I64 (ExtendKind.Sign)))
-            (hi Gpr (x64_sar $I64 lo (Imm8Reg.Imm8 63))))
-      (value_regs lo hi)))
-
-;; I{8,16,32} -> I64.
-(rule (lower (has_type $I64 (sextend src)))
-      (extend_to_gpr src $I64 (ExtendKind.Sign)))
-
-;; I{8,16} -> I32
-;; I8 -> I16
-(rule -1 (lower (has_type (fits_in_32 _) (sextend src)))
-         (extend_to_gpr src $I32 (ExtendKind.Sign)))
-
-;; Rules for `ireduce` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; T -> T is always a no-op, even I128 -> I128.
-(rule (lower (has_type ty (ireduce src @ (value_type ty))))
-      src)
-
-;; T -> I{64,32,16,8}: We can simply pass through the value: values
-;; are always stored with high bits undefined, so we can just leave
-;; them be.
-(rule 1 (lower (has_type (fits_in_64 ty) (ireduce src)))
-      (value_regs_get_gpr src 0))
-
-;; Rules for `debugtrap` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (debugtrap))
-      (side_effect (x64_hlt)))
-
-;; Rules for `x86_pmaddubsw` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I16X8 (x86_pmaddubsw x y)))
-      (if-let $true (use_ssse3))
-      (x64_pmaddubsw y x))
-
-;; Rules for `fadd` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fadd x y)))
-      (x64_addss x y))
-(rule (lower (has_type $F64 (fadd x y)))
-      (x64_addsd x y))
-(rule (lower (has_type $F32X4 (fadd x y)))
-      (x64_addps x y))
-(rule (lower (has_type $F64X2 (fadd x y)))
-      (x64_addpd x y))
-
-;; The above rules automatically sink loads for rhs operands, so additionally
-;; add rules for sinking loads with lhs operands.
-(rule 1 (lower (has_type $F32 (fadd (sinkable_load x) y)))
-      (x64_addss y x))
-(rule 1 (lower (has_type $F64 (fadd (sinkable_load x) y)))
-      (x64_addsd y x))
-(rule 1 (lower (has_type $F32X4 (fadd (sinkable_load x) y)))
-      (x64_addps y x))
-(rule 1 (lower (has_type $F64X2 (fadd (sinkable_load x) y)))
-      (x64_addpd y x))
-
-;; Rules for `fsub` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fsub x y)))
-      (x64_subss x y))
-(rule (lower (has_type $F64 (fsub x y)))
-      (x64_subsd x y))
-(rule (lower (has_type $F32X4 (fsub x y)))
-      (x64_subps x y))
-(rule (lower (has_type $F64X2 (fsub x y)))
-      (x64_subpd x y))
-
-;; Rules for `fmul` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fmul x y)))
-      (x64_mulss x y))
-(rule (lower (has_type $F64 (fmul x y)))
-      (x64_mulsd x y))
-(rule (lower (has_type $F32X4 (fmul x y)))
-      (x64_mulps x y))
-(rule (lower (has_type $F64X2 (fmul x y)))
-      (x64_mulpd x y))
-
-;; The above rules automatically sink loads for rhs operands, so additionally
-;; add rules for sinking loads with lhs operands.
-(rule 1 (lower (has_type $F32 (fmul (sinkable_load x) y)))
-      (x64_mulss y x))
-(rule 1 (lower (has_type $F64 (fmul (sinkable_load x) y)))
-      (x64_mulsd y x))
-(rule 1 (lower (has_type $F32X4 (fmul (sinkable_load x) y)))
-      (x64_mulps y x))
-(rule 1 (lower (has_type $F64X2 (fmul (sinkable_load x) y)))
-      (x64_mulpd y x))
-
-;; Rules for `fdiv` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fdiv x y)))
-      (x64_divss x y))
-(rule (lower (has_type $F64 (fdiv x y)))
-      (x64_divsd x y))
-(rule (lower (has_type $F32X4 (fdiv x y)))
-      (x64_divps x y))
-(rule (lower (has_type $F64X2 (fdiv x y)))
-      (x64_divpd x y))
-
-;; Rules for `sqrt` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-(rule (lower (has_type $F32 (sqrt x)))
-      (x64_sqrtss (xmm_zero $F32X4) x))
-(rule (lower (has_type $F64 (sqrt x)))
-      (x64_sqrtsd (xmm_zero $F64X2) x))
-(rule (lower (has_type $F32X4 (sqrt x)))
-      (x64_sqrtps x))
-(rule (lower (has_type $F64X2 (sqrt x)))
-      (x64_sqrtpd x))
-
-;; Rules for `fpromote` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-(rule (lower (has_type $F64 (fpromote x)))
-      (x64_cvtss2sd (xmm_zero $F64X2) x))
-
-;; Rules for `fvpromote` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-(rule (lower (has_type $F64X2 (fvpromote_low x)))
-      (x64_cvtps2pd (put_in_xmm x)))
-
-;; Rules for `fdemote` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-(rule (lower (has_type $F32 (fdemote x)))
-      (x64_cvtsd2ss (xmm_zero $F32X4) x))
-
-;; Rules for `fvdemote` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-(rule (lower (has_type $F32X4 (fvdemote x)))
-      (x64_cvtpd2ps x))
-
-;; Rules for `fmin` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fmin x y)))
-      (xmm_min_max_seq $F32 $true x y))
-(rule (lower (has_type $F64 (fmin x y)))
-      (xmm_min_max_seq $F64 $true x y))
-
-;; Vector-typed version. We don't use single pseudoinstructions as
-;; above, because we don't need to generate a mini-CFG. Instead, we
-;; perform a branchless series of operations.
-;;
-;; We cannot simply use native min instructions (minps, minpd) because
-;; NaN handling is different per CLIF semantics than on
-;; x86. Specifically, if an argument is NaN, or the arguments are both
-;; zero but of opposite signs, then the x86 instruction always
-;; produces the second argument. However, per CLIF semantics, we
-;; require that fmin(NaN, _) = fmin(_, NaN) = NaN, and fmin(+0, -0) =
-;; fmin(-0, +0) = -0.
-
-(rule (lower (has_type $F32X4 (fmin x y)))
-      ;; Compute min(x, y) and min(y, x) with native
-      ;; instructions. These will differ in one of the edge cases
-      ;; above that we have to handle properly. (Conversely, if they
-      ;; don't differ, then the native instruction's answer is the
-      ;; right one per CLIF semantics.)
-      (let ((min1 Xmm (x64_minps x y))
-            (min2 Xmm (x64_minps y x))
-            ;; Compute the OR of the two. Note that NaNs have an
-            ;; exponent field of all-ones (0xFF for F32), so if either
-            ;; result is a NaN, this OR will be. And if either is a
-            ;; zero (which has an exponent of 0 and mantissa of 0),
-            ;; this captures a sign-bit of 1 (negative) if either
-            ;; input is negative.
-            ;;
-            ;; In the case where we don't have a +/-0 mismatch or
-            ;; NaNs, then `min1` and `min2` are equal and `min_or` is
-            ;; the correct minimum.
-            (min_or Xmm (x64_orps min1 min2))
-            ;; "compare unordered" produces a true mask (all ones) in
-            ;; a given lane if the min is a NaN. We use this to
-            ;; generate a mask to ensure quiet NaNs.
-            (is_nan_mask Xmm (x64_cmpps min_or min2 (FcmpImm.Unordered)))
-            ;; OR in the NaN mask.
-            (min_or_2 Xmm (x64_orps min_or is_nan_mask))
-            ;; Shift the NaN mask down so that it covers just the
-            ;; fraction below the NaN signalling bit; we'll use this
-            ;; to mask off non-canonical NaN payloads.
-            ;;
-            ;; All-ones for NaN, shifted down to leave 10 top bits (1
-            ;; sign, 8 exponent, 1 QNaN bit that must remain set)
-            ;; cleared.
-            (nan_fraction_mask Xmm (x64_psrld is_nan_mask (xmi_imm 10)))
-            ;; Do a NAND, so that we retain every bit not set in
-            ;; `nan_fraction_mask`. This mask will be all zeroes (so
-            ;; we retain every bit) in non-NaN cases, and will have
-            ;; ones (so we clear those bits) in NaN-payload bits
-            ;; otherwise.
-            (final Xmm (x64_andnps nan_fraction_mask min_or_2)))
-        final))
-
-;; Likewise for F64 lanes, except that the right-shift is by 13 bits
-;; (1 sign, 11 exponent, 1 QNaN bit).
-(rule (lower (has_type $F64X2 (fmin x y)))
-      (let ((min1 Xmm (x64_minpd x y))
-            (min2 Xmm (x64_minpd y x))
-            (min_or Xmm (x64_orpd min1 min2))
-            (is_nan_mask Xmm (x64_cmppd min1 min2 (FcmpImm.Unordered)))
-            (min_or_2 Xmm (x64_orpd min_or is_nan_mask))
-            (nan_fraction_mask Xmm (x64_psrlq is_nan_mask (xmi_imm 13)))
-            (final Xmm (x64_andnpd nan_fraction_mask min_or_2)))
-        final))
-
-;; Rules for `fmax` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fmax x y)))
-      (xmm_min_max_seq $F32 $false x y))
-(rule (lower (has_type $F64 (fmax x y)))
-      (xmm_min_max_seq $F64 $false x y))
-
-;; The vector version of fmax here is a dual to the fmin sequence
-;; above, almost, with a few differences.
-
-(rule (lower (has_type $F32X4 (fmax x y)))
-      ;; Compute max(x, y) and max(y, x) with native
-      ;; instructions. These will differ in one of the edge cases
-      ;; above that we have to handle properly. (Conversely, if they
-      ;; don't differ, then the native instruction's answer is the
-      ;; right one per CLIF semantics.)
-      (let ((max1 Xmm (x64_maxps x y))
-            (max2 Xmm (x64_maxps y x))
-            ;; Compute the XOR of the two maxima. In the case
-            ;; where we don't have a +/-0 mismatch or NaNs, then
-            ;; `min1` and `min2` are equal and this XOR is zero.
-            (max_xor Xmm (x64_xorps max1 max2))
-            ;; OR the XOR into one of the original maxima. If they are
-            ;; equal, this does nothing. If max2 was NaN, its exponent
-            ;; bits were all-ones, so the xor's exponent bits were the
-            ;; complement of max1, and the OR of max1 and max_xor has
-            ;; an all-ones exponent (is a NaN). If max1 was NaN, then
-            ;; its exponent bits were already all-ones, so the OR will
-            ;; be a NaN as well.
-            (max_blended_nan Xmm (x64_orps max1 max_xor))
-            ;; Subtract the XOR. This ensures that if we had +0 and
-            ;; -0, we end up with +0.
-            (max_blended_nan_positive Xmm (x64_subps max_blended_nan max_xor))
-            ;; "compare unordered" produces a true mask (all ones) in
-            ;; a given lane if the min is a NaN. We use this to
-            ;; generate a mask to ensure quiet NaNs.
-            (is_nan_mask Xmm (x64_cmpps max_blended_nan max_blended_nan (FcmpImm.Unordered)))
-            ;; Shift the NaN mask down so that it covers just the
-            ;; fraction below the NaN signalling bit; we'll use this
-            ;; to mask off non-canonical NaN payloads.
-            ;;
-            ;; All-ones for NaN, shifted down to leave 10 top bits (1
-            ;; sign, 8 exponent, 1 QNaN bit that must remain set)
-            ;; cleared.
-            (nan_fraction_mask Xmm (x64_psrld is_nan_mask (xmi_imm 10)))
-            ;; Do a NAND, so that we retain every bit not set in
-            ;; `nan_fraction_mask`. This mask will be all zeroes (so
-            ;; we retain every bit) in non-NaN cases, and will have
-            ;; ones (so we clear those bits) in NaN-payload bits
-            ;; otherwise.
-            (final Xmm (x64_andnps nan_fraction_mask max_blended_nan_positive)))
-        final))
-
-(rule (lower (has_type $F64X2 (fmax x y)))
-      ;; Compute max(x, y) and max(y, x) with native
-      ;; instructions. These will differ in one of the edge cases
-      ;; above that we have to handle properly. (Conversely, if they
-      ;; don't differ, then the native instruction's answer is the
-      ;; right one per CLIF semantics.)
-      (let ((max1 Xmm (x64_maxpd x y))
-            (max2 Xmm (x64_maxpd y x))
-            ;; Compute the XOR of the two maxima. In the case
-            ;; where we don't have a +/-0 mismatch or NaNs, then
-            ;; `min1` and `min2` are equal and this XOR is zero.
-            (max_xor Xmm (x64_xorpd max1 max2))
-            ;; OR the XOR into one of the original maxima. If they are
-            ;; equal, this does nothing. If max2 was NaN, its exponent
-            ;; bits were all-ones, so the xor's exponent bits were the
-            ;; complement of max1, and the OR of max1 and max_xor has
-            ;; an all-ones exponent (is a NaN). If max1 was NaN, then
-            ;; its exponent bits were already all-ones, so the OR will
-            ;; be a NaN as well.
-            (max_blended_nan Xmm (x64_orpd max1 max_xor))
-            ;; Subtract the XOR. This ensures that if we had +0 and
-            ;; -0, we end up with +0.
-            (max_blended_nan_positive Xmm (x64_subpd max_blended_nan max_xor))
-            ;; `cmpps` with predicate index `3` is `cmpunordps`, or
-            ;; "compare unordered": it produces a true mask (all ones)
-            ;; in a given lane if the min is a NaN. We use this to
-            ;; generate a mask to ensure quiet NaNs.
-            (is_nan_mask Xmm (x64_cmppd max_blended_nan max_blended_nan (FcmpImm.Unordered)))
-            ;; Shift the NaN mask down so that it covers just the
-            ;; fraction below the NaN signalling bit; we'll use this
-            ;; to mask off non-canonical NaN payloads.
-            ;;
-            ;; All-ones for NaN, shifted down to leave 13 top bits (1
-            ;; sign, 11 exponent, 1 QNaN bit that must remain set)
-            ;; cleared.
-            (nan_fraction_mask Xmm (x64_psrlq is_nan_mask (xmi_imm 13)))
-            ;; Do a NAND, so that we retain every bit not set in
-            ;; `nan_fraction_mask`. This mask will be all zeroes (so
-            ;; we retain every bit) in non-NaN cases, and will have
-            ;; ones (so we clear those bits) in NaN-payload bits
-            ;; otherwise.
-            (final Xmm (x64_andnpd nan_fraction_mask max_blended_nan_positive)))
-        final))
-
-;; Rules for `fma` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Base case for fma is to call out to one of two libcalls. For vectors they
-;; need to be decomposed, handle each element individually, and then recomposed.
-
-(rule (lower (has_type $F32 (fma x y z)))
-      (libcall_3 (LibCall.FmaF32) x y z))
-(rule (lower (has_type $F64 (fma x y z)))
-      (libcall_3 (LibCall.FmaF64) x y z))
-
-(rule (lower (has_type $F32X4 (fma x y z)))
-      (let (
-          (x Xmm (put_in_xmm x))
-          (y Xmm (put_in_xmm y))
-          (z Xmm (put_in_xmm z))
-          (x0 Xmm (libcall_3 (LibCall.FmaF32) x y z))
-          (x1 Xmm (libcall_3 (LibCall.FmaF32)
-            (x64_pshufd x 1)
-            (x64_pshufd y 1)
-            (x64_pshufd z 1)))
-          (x2 Xmm (libcall_3 (LibCall.FmaF32)
-            (x64_pshufd x 2)
-            (x64_pshufd y 2)
-            (x64_pshufd z 2)))
-          (x3 Xmm (libcall_3 (LibCall.FmaF32)
-            (x64_pshufd x 3)
-            (x64_pshufd y 3)
-            (x64_pshufd z 3)))
-
-          (tmp Xmm (f32x4_insertlane x0 x1 1))
-          (tmp Xmm (f32x4_insertlane tmp x2 2))
-          (tmp Xmm (f32x4_insertlane tmp x3 3))
-        )
-        tmp))
-(rule (lower (has_type $F64X2 (fma x y z)))
-      (let (
-          (x Xmm (put_in_xmm x))
-          (y Xmm (put_in_xmm y))
-          (z Xmm (put_in_xmm z))
-          (x0 Xmm (libcall_3 (LibCall.FmaF64) x y z))
-          (x1 Xmm (libcall_3 (LibCall.FmaF64)
-            (x64_pshufd x 0xee)
-            (x64_pshufd y 0xee)
-            (x64_pshufd z 0xee)))
-        )
-        (x64_movlhps x0 x1)))
-
-
-;; Special case for when the `fma` feature is active and a native instruction
-;; can be used.
-(rule 1 (lower (has_type ty (fma x y z)))
-      (if-let $true (use_fma))
-      (fmadd ty x y z))
-
-(decl fmadd (Type Value Value Value) Xmm)
-(decl fnmadd (Type Value Value Value) Xmm)
-
-;; Base case. Note that this will automatically sink a load with `z`, the value
-;; to add.
-(rule (fmadd ty x y z) (x64_vfmadd213 ty x y z))
-
-;; Allow sinking loads with one of the two values being multiplied in addition
-;; to the value being added. Note that both x and y can be sunk here due to
-;; multiplication being commutative.
-(rule 1 (fmadd ty (sinkable_load x) y z) (x64_vfmadd132 ty y z x))
-(rule 2 (fmadd ty x (sinkable_load y) z) (x64_vfmadd132 ty x z y))
-
-;; If one of the values being multiplied is negated then use a `vfnmadd*`
-;; instruction instead
-(rule 3 (fmadd ty (fneg x) y z) (fnmadd ty x y z))
-(rule 4 (fmadd ty x (fneg y) z) (fnmadd ty x y z))
-
-(rule (fnmadd ty x y z) (x64_vfnmadd213 ty x y z))
-(rule 1 (fnmadd ty (sinkable_load x) y z) (x64_vfnmadd132 ty y z x))
-(rule 2 (fnmadd ty x (sinkable_load y) z) (x64_vfnmadd132 ty x z y))
-
-;; Like `fmadd` if one argument is negated switch which one is being codegen'd
-(rule 3 (fnmadd ty (fneg x) y z) (fmadd ty x y z))
-(rule 4 (fnmadd ty x (fneg y) z) (fmadd ty x y z))
-
-
-(rule 2 (lower (has_type ty (fma x y (fneg z))))
-      (if-let $true (use_fma))
-      (fmsub ty x y z))
-
-;; fmsub and fnmsub
-(decl fmsub (Type Value Value Value) Xmm)
-(decl fnmsub (Type Value Value Value) Xmm)
-
-;; Base case, will sink a load of `z` automatically.
-(rule (fmsub ty x y z) (x64_vfmsub213 ty x y z))
-
-;; Allow sinking loads with one of the two values being multiplied in addition
-;; to the value being subtracted. Note that both x and y can be sunk here due to
-;; multiplication being commutative.
-(rule 1 (fmsub ty (sinkable_load x) y z) (x64_vfmsub132 ty y z x))
-(rule 2 (fmsub ty x (sinkable_load y) z) (x64_vfmsub132 ty x z y))
-
-;; If one of the values being multiplied is negated then use a `vfnmsub*`
-;; instruction instead
-(rule 3 (fmsub ty (fneg x) y z) (fnmsub ty x y z))
-(rule 4 (fmsub ty x (fneg y) z) (fnmsub ty x y z))
-
-(rule (fnmsub ty x y z) (x64_vfnmsub213 ty x y z))
-(rule 1 (fnmsub ty (sinkable_load x) y z) (x64_vfnmsub132 ty y z x))
-(rule 2 (fnmsub ty x (sinkable_load y) z) (x64_vfnmsub132 ty x z y))
-
-;; Like `fmsub` if one argument is negated switch which one is being codegen'd
-(rule 3 (fnmsub ty (fneg x) y z) (fmsub ty x y z))
-(rule 4 (fnmsub ty x (fneg y) z) (fmsub ty x y z))
-
-
-;; Rules for `load*` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; In order to load a value from memory to a GPR register, we may need to extend
-;; the loaded value from 8-, 16-, or 32-bits to this backend's expected GPR
-;; width: 64 bits. Note that `ext_mode` will load 1-bit types (booleans) as
-;; 8-bit loads.
-;;
-;; By default, we zero-extend all sub-64-bit loads to a GPR.
-(rule -4 (lower (has_type (and (fits_in_32 ty) (is_gpr_type _)) (load flags address offset)))
-      (x64_movzx (ext_mode (ty_bits_u16 ty) 64) (to_amode flags address offset)))
-;; But if we know that both the `from` and `to` are 64 bits, we simply load with
-;; no extension.
-(rule -1 (lower (has_type (ty_int_ref_64 ty) (load flags address offset)))
-      (x64_mov (to_amode flags address offset)))
-;; Also, certain scalar loads have a specific `from` width and extension kind
-;; (signed -> `sx`, zeroed -> `zx`). We overwrite the high bits of the 64-bit
-;; GPR even if the `to` type is smaller (e.g., 16-bits).
-(rule (lower (has_type (is_gpr_type ty) (uload8 flags address offset)))
-      (x64_movzx (ExtMode.BQ) (to_amode flags address offset)))
-(rule (lower (has_type (is_gpr_type ty) (sload8 flags address offset)))
-      (x64_movsx (ExtMode.BQ) (to_amode flags address offset)))
-(rule (lower (has_type (is_gpr_type ty) (uload16 flags address offset)))
-      (x64_movzx (ExtMode.WQ) (to_amode flags address offset)))
-(rule (lower (has_type (is_gpr_type ty) (sload16 flags address offset)))
-      (x64_movsx (ExtMode.WQ) (to_amode flags address offset)))
-(rule (lower (has_type (is_gpr_type ty) (uload32 flags address offset)))
-      (x64_movzx (ExtMode.LQ) (to_amode flags address offset)))
-(rule (lower (has_type (is_gpr_type ty) (sload32 flags address offset)))
-      (x64_movsx (ExtMode.LQ) (to_amode flags address offset)))
-
-;; To load to XMM registers, we use the x64-specific instructions for each type.
-;; For `$F32` and `$F64` this is important--we only want to load 32 or 64 bits.
-;; But for the 128-bit types, this is not strictly necessary for performance but
-;; might help with clarity during disassembly.
-(rule (lower (has_type $F16 (load flags address offset)))
-      (x64_pinsrw (xmm_uninit_value) (to_amode flags address offset) 0))
-(rule (lower (has_type $F32 (load flags address offset)))
-      (x64_movss_load (to_amode flags address offset)))
-(rule (lower (has_type $F64 (load flags address offset)))
-      (x64_movsd_load (to_amode flags address offset)))
-(rule (lower (has_type $F128 (load flags address offset)))
-      (x64_movdqu_load (to_amode flags address offset)))
-(rule (lower (has_type $F32X4 (load flags address offset)))
-      (x64_movups_load (to_amode flags address offset)))
-(rule (lower (has_type $F64X2 (load flags address offset)))
-      (x64_movupd_load (to_amode flags address offset)))
-(rule -2 (lower (has_type (ty_vec128 ty) (load flags address offset)))
-      (x64_movdqu_load (to_amode flags address offset)))
-
-;; We can load an I128 by doing two 64-bit loads.
-(rule -3 (lower (has_type $I128
-                       (load flags address offset)))
-      (let ((addr_lo Amode (to_amode flags address offset))
-            (addr_hi Amode (amode_offset addr_lo 8))
-            (value_lo Reg (x64_mov addr_lo))
-            (value_hi Reg (x64_mov addr_hi)))
-        (value_regs value_lo value_hi)))
-
-;; We also include widening vector loads; these sign- or zero-extend each lane
-;; to the next wider width (e.g., 16x4 -> 32x4).
-(rule 1 (lower (has_type $I16X8 (sload8x8 flags address offset)))
-        (if-let $true (use_sse41))
-        (x64_pmovsxbw (to_amode flags address offset)))
-(rule 1 (lower (has_type $I16X8 (uload8x8 flags address offset)))
-        (if-let $true (use_sse41))
-        (x64_pmovzxbw (to_amode flags address offset)))
-(rule 1 (lower (has_type $I32X4 (sload16x4 flags address offset)))
-        (if-let $true (use_sse41))
-        (x64_pmovsxwd (to_amode flags address offset)))
-(rule 1 (lower (has_type $I32X4 (uload16x4 flags address offset)))
-        (if-let $true (use_sse41))
-        (x64_pmovzxwd (to_amode flags address offset)))
-(rule 1 (lower (has_type $I64X2 (sload32x2 flags address offset)))
-        (if-let $true (use_sse41))
-        (x64_pmovsxdq (to_amode flags address offset)))
-(rule 1 (lower (has_type $I64X2 (uload32x2 flags address offset)))
-        (if-let $true (use_sse41))
-        (x64_pmovzxdq (to_amode flags address offset)))
-
-(rule (lower (has_type $I16X8 (sload8x8 flags address offset)))
-      (lower_swiden_low $I16X8 (x64_movq_to_xmm (to_amode flags address offset))))
-(rule (lower (has_type $I16X8 (uload8x8 flags address offset)))
-      (lower_uwiden_low $I16X8 (x64_movq_to_xmm (to_amode flags address offset))))
-(rule (lower (has_type $I32X4 (sload16x4 flags address offset)))
-      (lower_swiden_low $I32X4 (x64_movq_to_xmm (to_amode flags address offset))))
-(rule (lower (has_type $I32X4 (uload16x4 flags address offset)))
-      (lower_uwiden_low $I32X4 (x64_movq_to_xmm (to_amode flags address offset))))
-(rule (lower (has_type $I64X2 (sload32x2 flags address offset)))
-      (lower_swiden_low $I64X2 (x64_movq_to_xmm (to_amode flags address offset))))
-(rule (lower (has_type $I64X2 (uload32x2 flags address offset)))
-      (lower_uwiden_low $I64X2 (x64_movq_to_xmm (to_amode flags address offset))))
-
-;; Rules for `store*` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; 8-, 16-, 32- and 64-bit GPR stores.
-(rule -2 (lower (store flags
-                    value @ (value_type (is_gpr_type ty))
-                    address
-                    offset))
-      (side_effect
-       (x64_movrm ty (to_amode flags address offset) value)))
-
-;; Explicit 8/16/32-bit opcodes.
-(rule (lower (istore8 flags value address offset))
-      (side_effect
-       (x64_movrm $I8 (to_amode flags address offset) value)))
-(rule (lower (istore16 flags value address offset))
-      (side_effect
-       (x64_movrm $I16 (to_amode flags address offset) value)))
-(rule (lower (istore32 flags value address offset))
-      (side_effect
-       (x64_movrm $I32 (to_amode flags address offset) value)))
-
-;; IMM stores
-(rule 4 (lower (store flags value @ (value_type (fits_in_64 ty)) address offset))
-      (if-let (i32_from_iconst imm) value)
-      (side_effect
-       (x64_movimm_m ty (to_amode flags address offset) imm)))
-
-;; F16 stores of values in XMM registers.
-(rule 0 (lower (store flags
-                    value @ (value_type $F16)
-                    address
-                    offset))
-      (side_effect
-       (x64_movrm $I16 (to_amode flags address offset) (bitcast_xmm_to_gpr 16 value))))
-
-(rule 1 (lower (store flags
-                    value @ (value_type $F16)
-                    address
-                    offset))
-      (if-let $true (use_sse41))
-      (side_effect
-       (x64_pextrw_store (to_amode flags address offset) value 0)))
-
-;; F32 stores of values in XMM registers.
-(rule 1 (lower (store flags
-                    value @ (value_type $F32)
-                    address
-                    offset))
-      (side_effect
-       (x64_movss_store (to_amode flags address offset) value)))
-
-;; F64 stores of values in XMM registers.
-(rule 1 (lower (store flags
-                    value @ (value_type $F64)
-                    address
-                    offset))
-      (side_effect
-       (x64_movsd_store (to_amode flags address offset) value)))
-
-;; F128 stores of values in XMM registers.
-(rule 1 (lower (store flags
-                    value @ (value_type $F128)
-                    address
-                    offset))
-      (side_effect
-       (x64_movdqu_store (to_amode flags address offset) value)))
-
-;; Stores of F32X4 vectors.
-(rule 1 (lower (store flags
-                    value @ (value_type $F32X4)
-                    address
-                    offset))
-      (side_effect
-       (x64_movups_store (to_amode flags address offset) value)))
-
-;; Stores of F64X2 vectors.
-(rule 1 (lower (store flags
-                    value @ (value_type $F64X2)
-                    address
-                    offset))
-      (side_effect
-       (x64_movupd_store (to_amode flags address offset) value)))
-
-;; Stores of all other 128-bit vector types with integer lanes.
-(rule -1 (lower (store flags
-                    value @ (value_type (ty_vec128_int _))
-                    address
-                    offset))
-      (side_effect
-       (x64_movdqu_store (to_amode flags address offset) value)))
-
-;; Stores of I128 values: store the two 64-bit halves separately.
-(rule 0 (lower (store flags
-                    value @ (value_type $I128)
-                    address
-                    offset))
-      (let ((value_reg ValueRegs value)
-            (value_lo Gpr (value_regs_get_gpr value_reg 0))
-            (value_hi Gpr (value_regs_get_gpr value_reg 1))
-            (addr_lo Amode (to_amode flags address offset))
-            (addr_hi Amode (amode_offset addr_lo 8)))
-      (side_effect
-       (side_effect_concat
-        (x64_movrm $I64 addr_lo value_lo)
-        (x64_movrm $I64 addr_hi value_hi)))))
-
-;; Slightly optimize the extraction of the first lane from a vector which is
-;; stored in memory. In the case the first lane specifically is selected the
-;; standard `movss` and `movsd` instructions can be used as-if we're storing a
-;; f32 or f64 despite the source perhaps being an integer vector since the
-;; result of the instruction is the same.
-(rule 2 (lower (store flags
-                    (has_type $F32 (extractlane value (u8_from_uimm8 0)))
-                    address
-                    offset))
-      (side_effect
-       (x64_movss_store (to_amode flags address offset) value)))
-(rule 2 (lower (store flags
-                    (has_type $F64 (extractlane value (u8_from_uimm8 0)))
-                    address
-                    offset))
-      (side_effect
-       (x64_movsd_store (to_amode flags address offset) value)))
-(rule 2 (lower (store flags
-                    (has_type $I8 (extractlane value (u8_from_uimm8 n)))
-                    address
-                    offset))
-      (if-let $true (use_sse41))
-      (side_effect
-       (x64_pextrb_store (to_amode flags address offset) value n)))
-(rule 2 (lower (store flags
-                    (has_type $I16 (extractlane value (u8_from_uimm8 n)))
-                    address
-                    offset))
-      (if-let $true (use_sse41))
-      (side_effect
-       (x64_pextrw_store (to_amode flags address offset) value n)))
-(rule 2 (lower (store flags
-                    (has_type $I32 (extractlane value (u8_from_uimm8 n)))
-                    address
-                    offset))
-      (if-let $true (use_sse41))
-      (side_effect
-       (x64_pextrd_store (to_amode flags address offset) value n)))
-(rule 2 (lower (store flags
-                    (has_type $I64 (extractlane value (u8_from_uimm8 n)))
-                    address
-                    offset))
-      (if-let $true (use_sse41))
-      (side_effect
-       (x64_pextrq_store (to_amode flags address offset) value n)))
-
-;; Rules for `load*` + ALU op + `store*` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Add mem, reg
-(rule 3 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (iadd (and
-                               (sinkable_load sink)
-                               (load flags addr offset))
-                              src2))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_add_mem ty (to_amode flags addr offset) src2))))
-
-;; Add mem, reg with args swapped
-(rule 2 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (iadd src2
-                              (and
-                               (sinkable_load sink)
-                               (load flags addr offset))))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_add_mem ty (to_amode flags addr offset) src2))))
-
-;; Sub mem, reg
-(rule 2 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (isub (and
-                               (sinkable_load sink)
-                               (load flags addr offset))
-                              src2))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_sub_mem ty (to_amode flags addr offset) src2))))
-
-;; And mem, reg
-(rule 3 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (band (and
-                               (sinkable_load sink)
-                               (load flags addr offset))
-                              src2))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_and_mem ty (to_amode flags addr offset) src2))))
-
-;; And mem, reg with args swapped
-(rule 2 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (band src2
-                              (and
-                               (sinkable_load sink)
-                               (load flags addr offset))))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_and_mem ty (to_amode flags addr offset) src2))))
-
-;; Or mem, reg
-(rule 3 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (bor (and
-                               (sinkable_load sink)
-                               (load flags addr offset))
-                              src2))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_or_mem ty (to_amode flags addr offset) src2))))
-
-;; Or mem, reg with args swapped
-(rule 2 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (bor src2
-                              (and
-                               (sinkable_load sink)
-                               (load flags addr offset))))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_or_mem ty (to_amode flags addr offset) src2))))
-
-;; Xor mem, reg
-(rule 3 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (bxor (and
-                               (sinkable_load sink)
-                               (load flags addr offset))
-                              src2))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_xor_mem ty (to_amode flags addr offset) src2))))
-
-;; Xor mem, reg with args swapped
-(rule 2 (lower
-       (store flags
-              (has_type (ty_32_or_64 ty)
-                        (bxor src2
-                              (and
-                               (sinkable_load sink)
-                               (load flags addr offset))))
-              addr
-              offset))
-      (let ((_ RegMemImm sink))
-        (side_effect
-         (x64_xor_mem ty (to_amode flags addr offset) src2))))
-
-;; Rules for `fence` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (fence))
-      (side_effect (x64_mfence)))
-
-;; Rules for `func_addr` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (func_addr (func_ref_data _ extname dist)))
-      (load_ext_name extname 0 dist))
-
-;; Rules for `symbol_value` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (symbol_value (symbol_value_data extname dist offset)))
-      (load_ext_name extname offset dist))
-
-;; Rules for `atomic_load` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; This is a normal load. The x86-TSO memory model provides sufficient
-;; sequencing to satisfy the CLIF synchronisation requirements for `AtomicLoad`
-;; without the need for any fence instructions.
-;;
-;; As described in the `atomic_load` documentation, this lowering is only valid
-;; for I8, I16, I32, and I64. The sub-64-bit types are zero extended, as with a
-;; normal load.
-(rule 1 (lower (has_type $I64 (atomic_load flags address)))
-      (x64_mov (to_amode flags address (zero_offset))))
-(rule (lower (has_type (and (fits_in_32 ty) (ty_int _)) (atomic_load flags address)))
-      (x64_movzx (ext_mode (ty_bits_u16 ty) 64) (to_amode flags address (zero_offset))))
-
-;; Rules for `atomic_store` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; This is a normal store followed by an `mfence` instruction. As described in
-;; the `atomic_load` documentation, this lowering is only valid for I8, I16,
-;; I32, and I64.
-(rule (lower (atomic_store flags
-                           value @ (value_type (and (fits_in_64 ty) (ty_int _)))
-                           address))
-      (side_effect (side_effect_concat
-       (x64_movrm ty (to_amode flags address (zero_offset)) value)
-       (x64_mfence))))
-
-;; Rules for `atomic_cas` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (and (fits_in_64 ty) (ty_int _))
-                  (atomic_cas flags address expected replacement)))
-      (x64_cmpxchg ty expected replacement (to_amode flags address (zero_offset))))
-
-;; Rules for `atomic_rmw` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; This is a simple, general-case atomic update, based on a loop involving
-;; `cmpxchg`.  Note that we could do much better than this in the case where the
-;; old value at the location (that is to say, the SSA `Value` computed by this
-;; CLIF instruction) is not required.  In that case, we could instead implement
-;; this using a single `lock`-prefixed x64 read-modify-write instruction.  Also,
-;; even in the case where the old value is required, for the `add` and `sub`
-;; cases, we can use the single instruction `lock xadd`.  However, those
-;; improvements have been left for another day. TODO: filed as
-;; https://github.com/bytecodealliance/wasmtime/issues/2153.
-
-(rule (lower (has_type (and (fits_in_64 ty) (ty_int _))
-                  (atomic_rmw flags op address input)))
-      (x64_atomic_rmw_seq ty op (to_amode flags address (zero_offset)) input))
-
-;; Rules for `call` and `call_indirect` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (call (func_ref_data sig_ref extname dist) inputs))
-      (gen_call sig_ref extname dist inputs))
-
-(rule (lower (call_indirect sig_ref val inputs))
-      (gen_call_indirect sig_ref val inputs))
-
-;;;; Rules for `return_call` and `return_call_indirect` ;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (return_call (func_ref_data sig_ref extname dist) args))
-      (gen_return_call sig_ref extname dist args))
-
-(rule (lower (return_call_indirect sig_ref callee args))
-      (gen_return_call_indirect sig_ref callee args))
-
-;;;; Rules for `get_{frame,stack}_pointer` and `get_return_address` ;;;;;;;;;;;;
-
-(rule (lower (get_frame_pointer))
-      (x64_rbp))
-
-(rule (lower (get_stack_pointer))
-      (x64_rsp))
-
-(rule (lower (get_return_address))
-      (x64_load $I64
-                (Amode.ImmReg 8 (x64_rbp) (mem_flags_trusted))
-                (ExtKind.None)))
-
-;; Rules for `jump` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower_branch (jump _) (single_target target))
-      (emit_side_effect (jmp_known target)))
-
-;; Rules for `brif` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 2 (lower_branch (brif (maybe_uextend (icmp cc a b)) _ _) (two_targets then else))
-        (emit_side_effect (jmp_cond_icmp (emit_cmp cc a b) then else)))
-
-(rule 2 (lower_branch (brif (maybe_uextend (fcmp cc a b)) _ _) (two_targets then else))
-        (emit_side_effect (jmp_cond_fcmp (emit_fcmp cc a b) then else)))
-
-(rule 2 (lower_branch (brif (maybe_uextend (vany_true a)) _ _) (two_targets then else))
-        (emit_side_effect (jmp_cond_icmp (emit_vany_true a) then else)))
-
-(rule 2 (lower_branch (brif (maybe_uextend (vall_true a)) _ _) (two_targets then else))
-        (emit_side_effect (jmp_cond_icmp (emit_vall_true a) then else)))
-
-(rule 1 (lower_branch (brif val @ (value_type $I128) _ _)
-                      (two_targets then else))
-      (emit_side_effect (jmp_cond_icmp (cmp_zero_i128 (CC.Z) val) then else)))
-
-(rule (lower_branch (brif val @ (value_type (ty_int_bool_or_ref)) _ _)
-                    (two_targets then else))
-      (emit_side_effect (with_flags_side_effect
-                          (cmp_zero_int_bool_ref val)
-                          (jmp_cond (CC.NZ) then else))))
-
-
-;; Compare an I128 value to zero, returning a flags result suitable for making a
-;; jump decision. The comparison is implemented as `(hi | low) == 0`,
-;; and the result can be interpreted as follows
-;; * CC.Z indicates that the value was non-zero, as one or both of the halves of
-;;   the value were non-zero
-;; * CC.NZ indicates that both halves of the value were 0
-(decl cmp_zero_i128 (CC ValueRegs) IcmpCondResult)
-(rule (cmp_zero_i128 (cc_nz_or_z cc) val)
-      (let ((lo Gpr (value_regs_get_gpr val 0))
-            (hi Gpr (value_regs_get_gpr val 1)))
-          (icmp_cond_result
-            (x64_alurmi_flags_side_effect (AluRmiROpcode.Or) $I64 lo hi)
-            (cc_invert cc))))
-
-
-(decl cmp_zero_int_bool_ref (Value) ProducesFlags)
-(rule (cmp_zero_int_bool_ref val @ (value_type ty))
-      (let ((size OperandSize (raw_operand_size_of_type ty))
-            (src Gpr val))
-        (x64_test size src src)))
-
-;; Rules for `br_table` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower_branch (br_table idx @ (value_type ty) _) (jump_table_targets default_target jt_targets))
-      (let ((size OperandSize (raw_operand_size_of_type ty))
-            (jt_size u32 (jump_table_size jt_targets))
-            (size_reg Reg (imm ty (u32_as_u64 jt_size)))
-            (idx_reg Gpr (extend_to_gpr idx $I64 (ExtendKind.Zero)))
-            (clamped_idx Reg (with_flags_reg
-              (x64_cmp size idx_reg size_reg)
-              (cmove ty (CC.B) idx_reg size_reg))))
-      (emit_side_effect (jmp_table_seq ty clamped_idx default_target jt_targets))))
-
-;; Rules for `select_spectre_guard` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (select_spectre_guard (icmp cc a b) x y))
-      (select_icmp (emit_cmp cc a b) x y))
-
-(rule -1 (lower (has_type ty (select_spectre_guard c @ (value_type (fits_in_64 a_ty)) x y)))
-      (let ((size OperandSize (raw_operand_size_of_type a_ty))
-            (gpr_c Gpr (put_in_gpr c)))
-        (with_flags (x64_test size gpr_c gpr_c) (cmove_from_values ty (CC.NZ) x y))))
-
-(rule -2 (lower (has_type ty (select_spectre_guard c @ (value_type $I128) x y)))
-      (let ((cond_result IcmpCondResult (cmp_zero_i128 (CC.Z) c)))
-        (select_icmp cond_result x y)))
-
-;; Rules for `fcvt_from_sint` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Note that the `cvtsi2s{s,d}` instruction is not just an int-to-float
-;; conversion instruction in isolation, it also takes the upper 64-bits of an
-;; xmm register and places it into the destination. We don't actually want that
-;; to happen as it could accidentally create a false dependency with a
-;; previous instruction defining the register's upper 64-bits. See #7085 for
-;; an instance of this.
-;;
-;; This means that the first operand to all of the int-to-float conversions here
-;; are `(xmm_zero)` operands which is a guaranteed zero register that has no
-;; dependencies on other instructions.
-;;
-;; Ideally this would be lifted out to a higher level to get deduplicated
-;; between consecutive int-to-float operations but that's not easy
-;; to do at this time. One possibility would be a mid-end rule which rewrites
-;; `fcvt_from_sint` to an x86-specific opcode using a zero constant which would
-;; be subject to normal LICM, but that's not feasible today.
-
-(rule 2 (lower (has_type $F32 (fcvt_from_sint a @ (value_type $I8))))
-      (x64_cvtsi2ss $I32 (xmm_zero $F32X4) (extend_to_gpr a $I32 (ExtendKind.Sign))))
-
-(rule 2 (lower (has_type $F32 (fcvt_from_sint a @ (value_type $I16))))
-      (x64_cvtsi2ss $I32 (xmm_zero $F32X4) (extend_to_gpr a $I32 (ExtendKind.Sign))))
-
-(rule 1 (lower (has_type $F32 (fcvt_from_sint a @ (value_type (ty_int (fits_in_64 ty))))))
-      (x64_cvtsi2ss ty (xmm_zero $F32X4) a))
-
-(rule 2 (lower (has_type $F64 (fcvt_from_sint a @ (value_type $I8))))
-      (x64_cvtsi2sd $I32 (xmm_zero $F64X2) (extend_to_gpr a $I32 (ExtendKind.Sign))))
-
-(rule 2 (lower (has_type $F64 (fcvt_from_sint a @ (value_type $I16))))
-      (x64_cvtsi2sd $I32 (xmm_zero $F64X2) (extend_to_gpr a $I32 (ExtendKind.Sign))))
-
-(rule 1 (lower (has_type $F64 (fcvt_from_sint a @ (value_type (ty_int (fits_in_64 ty))))))
-      (x64_cvtsi2sd ty (xmm_zero $F64X2) a))
-
-(rule 0 (lower (fcvt_from_sint a @ (value_type $I32X4)))
-      (x64_cvtdq2ps a))
-
-;; Base case: decompose the i64x2 input into two scalar registers and convert
-;; each of those into a float. Afterwards re-pack the two results into the final
-;; destination.
-(rule 0 (lower (fcvt_from_sint a @ (value_type $I64X2)))
-      (let (
-          (a Xmm a)
-          (zero Xmm (xmm_zero $F64X2))
-          (f0 Xmm (x64_cvtsi2sd $I64 zero (x64_movq_to_gpr a)))
-          (f1 Xmm (x64_cvtsi2sd $I64 zero (x64_movq_to_gpr (x64_pshufd a 0b11_10_11_10))))
-        )
-        (x64_unpcklpd f0 f1)))
-
-(rule 1 (lower (has_type $F64X2 (fcvt_from_sint (swiden_low a @ (value_type $I32X4)))))
-      (x64_cvtdq2pd a))
-
-;; Rules for `fcvt_from_uint` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (has_type $F32 (fcvt_from_uint val @ (value_type (fits_in_32 (ty_int ty))))))
-      (x64_cvtsi2ss $I64 (xmm_zero $F32X4) (extend_to_gpr val $I64 (ExtendKind.Zero))))
-
-(rule 1 (lower (has_type $F64 (fcvt_from_uint val @ (value_type (fits_in_32 (ty_int ty))))))
-      (x64_cvtsi2sd $I64 (xmm_zero $F64X2) (extend_to_gpr val $I64 (ExtendKind.Zero))))
-
-(rule (lower (has_type ty (fcvt_from_uint val @ (value_type $I64))))
-      (cvt_u64_to_float_seq ty val))
-
-;; Base case of u64x2 being converted to f64x2. No native instruction for this
-;; is available so it's emulated through a series of instructions that exploit
-;; the binary representation of 64-bit floats. This sequence of instructions is
-;; copied from LLVM and my understanding of the general idea is to roughly:
-;;
-;; * For each bullet below operate in parallel on the left and right lanes.
-;; * Move the low 32 bits of the input into one register and the upper
-;;   32-bits into a different register, where both have all 0s for the upper
-;;   32-bits. (e.g. split the 64-bit input into two locations)
-;; * For the low bits, create `1.<twenty-zeros><low32>p52` via bit tricks.
-;; * For the high bits, create `1.<twenty-zeros><high32>p84` via bit tricks.
-;; * Create the constant `1.0p84 + 1.0p52`
-;; * Add the two high halves and subtract the constant.
-;;
-;; Apply some math and this should produce the same result as the native
-;; conversion.
-;;
-;; As for the bit tricks a float is represented where the low 53 bits are the
-;; decimal of the float, basically:
-;;
-;;  f = 1.<fraction> ^ (<exponent> - 1023)
-;;
-;; where `<fraction>` is the low 53 bits. By placing the 32-bit halves from
-;; the original integer into the low 53 bits and setting the exponent right it
-;; means that each 32-bit half can become part of a 64-bit floating point
-;; number. The final step in combining via float arithmetic will chop off the
-;; leading `1.` at the start of the float that we constructed, one for the low
-;; half and one for the upper half.
-(rule -1 (lower (has_type $F64X2 (fcvt_from_uint val @ (value_type $I64X2))))
-  (let ((low32_mask XmmMem (emit_u128_le_const 0x00000000ffffffff_00000000ffffffff))
-        (float_1p52 XmmMem (emit_u128_le_const 0x4330000000000000_4330000000000000))
-        (float_1p84 XmmMem (emit_u128_le_const 0x4530000000000000_4530000000000000))
-        (float_1p84_plus_1p52 XmmMem (emit_u128_le_const 0x4530000000100000_4530000000100000))
-        (low32 Xmm (x64_pand val low32_mask))
-        (low32_as_float Xmm (x64_por low32 float_1p52))
-        (high32 Xmm (x64_psrlq val (xmi_imm 32)))
-        (high32_as_float Xmm (x64_por high32 float_1p84)))
-    (x64_addpd low32_as_float (x64_subpd high32_as_float float_1p84_plus_1p52))))
-
-;; Algorithm uses unpcklps to help create a float that is equivalent
-;; 0x1.0p52 + double(src). 0x1.0p52 is unique because at this exponent
-;; every value of the mantissa represents a corresponding uint32 number.
-;; When we subtract 0x1.0p52 we are left with double(src).
-(rule 1 (lower (has_type $F64X2 (fcvt_from_uint (uwiden_low val @ (value_type $I32X4)))))
-      (let ((uint_mask XmmMem (emit_u128_le_const 0x43300000_43300000))
-            (res Xmm (x64_unpcklps val uint_mask))
-            (uint_mask_high XmmMem (emit_u128_le_const 0x4330000000000000_4330000000000000)))
-        (x64_subpd res uint_mask_high)))
-
-;; When AVX512VL and AVX512F are available,
-;; `fcvt_from_uint` can be lowered to a single instruction.
-(rule 2 (lower (has_type $F32X4 (fcvt_from_uint src)))
-      (if-let $true (use_avx512vl))
-      (if-let $true (use_avx512f))
-      (x64_vcvtudq2ps src))
-
-;; Converting packed unsigned integers to packed floats
-;; requires a few steps. There is no single instruction
-;; lowering for converting unsigned floats but there is for
-;; converting packed signed integers to float (cvtdq2ps). In
-;; the steps below we isolate the upper half (16 bits) and
-;; lower half (16 bits) of each lane and then we convert
-;; each half separately using cvtdq2ps meant for signed
-;; integers. In order for this to work for the upper half
-;; bits we must shift right by 1 (divide by 2) these bits in
-;; order to ensure the most significant bit is 0 not signed,
-;; and then after the conversion we double the value.
-;; Finally we add the converted values where addition will
-;; correctly round.
-;;
-;; Sequence:
-;; -> A = 0xffffffff
-;; -> Ah = 0xffff0000
-;; -> Al = 0x0000ffff
-;; -> Convert(Al) // Convert int to float
-;; -> Ah = Ah >> 1 // Shift right 1 to assure Ah conversion isn't treated as signed
-;; -> Convert(Ah) // Convert .. with no loss of significant digits from previous shift
-;; -> Ah = Ah + Ah // Double Ah to account for shift right before the conversion.
-;; -> dst = Ah + Al // Add the two floats together
-(rule 1 (lower (has_type $F32X4 (fcvt_from_uint val)))
-      (let ((a Xmm val)
-
-            ;;  get the low 16 bits
-            (a_lo Xmm (x64_pslld a (xmi_imm 16)))
-            (a_lo Xmm (x64_psrld a_lo (xmi_imm 16)))
-
-            ;; get the high 16 bits
-            (a_hi Xmm (x64_psubd a a_lo))
-
-            ;; convert the low 16 bits
-            (a_lo Xmm (x64_cvtdq2ps a_lo))
-
-            ;; shift the high bits by 1, convert, and double to get the correct
-            ;; value
-            (a_hi Xmm (x64_psrld a_hi (xmi_imm 1)))
-            (a_hi Xmm (x64_cvtdq2ps a_hi))
-            (a_hi Xmm (x64_addps a_hi a_hi)))
-
-        ;; add together the two converted values
-        (x64_addps a_hi a_lo)))
-
-;; Rules for `fcvt_to_uint` and `fcvt_to_sint` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type out_ty (fcvt_to_uint val @ (value_type (ty_scalar_float _)))))
-      (cvt_float_to_uint_seq out_ty val $false))
-
-(rule (lower (has_type out_ty (fcvt_to_uint_sat val @ (value_type (ty_scalar_float _)))))
-      (cvt_float_to_uint_seq out_ty val $true))
-
-(rule (lower (has_type out_ty (fcvt_to_sint val @ (value_type (ty_scalar_float _)))))
-      (cvt_float_to_sint_seq out_ty val $false))
-
-(rule (lower (has_type out_ty (fcvt_to_sint_sat val @ (value_type (ty_scalar_float _)))))
-      (cvt_float_to_sint_seq out_ty val $true))
-
-;; The x64 backend currently only supports these two type combinations.
-(rule 1 (lower (has_type $I32X4 (fcvt_to_sint_sat val @ (value_type $F32X4))))
-      (let ((src Xmm val)
-
-            ;; Sets tmp to zero if float is NaN
-            (tmp Xmm (x64_cmpps src src (FcmpImm.Equal)))
-            (dst Xmm (x64_andps src tmp))
-
-            ;; Sets top bit of tmp if float is positive
-            ;; Setting up to set top bit on negative float values
-            (tmp Xmm (x64_pxor tmp dst))
-
-            ;; Convert the packed float to packed doubleword.
-            (dst Xmm (x64_cvttps2dq dst))
-
-            ;; Set top bit only if < 0
-            (tmp Xmm (x64_pand dst tmp))
-            (tmp Xmm (x64_psrad tmp (xmi_imm 31))))
-
-        ;; On overflow 0x80000000 is returned to a lane.
-        ;; Below sets positive overflow lanes to 0x7FFFFFFF
-        ;; Keeps negative overflow lanes as is.
-        (x64_pxor tmp dst)))
-
-;; The algorithm for converting floats to unsigned ints is a little tricky. The
-;; complication arises because we are converting from a signed 64-bit int with a positive
-;; integer range from 1..INT_MAX (0x1..0x7FFFFFFF) to an unsigned integer with an extended
-;; range from (INT_MAX+1)..UINT_MAX. It's this range from (INT_MAX+1)..UINT_MAX
-;; (0x80000000..0xFFFFFFFF) that needs to be accounted for as a special case since our
-;; conversion instruction (cvttps2dq) only converts as high as INT_MAX (0x7FFFFFFF), but
-;; which conveniently setting underflows and overflows (smaller than MIN_INT or larger than
-;; MAX_INT) to be INT_MAX+1 (0x80000000). Nothing that the range (INT_MAX+1)..UINT_MAX includes
-;; precisely INT_MAX values we can correctly account for and convert every value in this range
-;; if we simply subtract INT_MAX+1 before doing the cvttps2dq conversion. After the subtraction
-;; every value originally (INT_MAX+1)..UINT_MAX is now the range (0..INT_MAX).
-;; After the conversion we add INT_MAX+1 back to this converted value, noting again that
-;; values we are trying to account for were already set to INT_MAX+1 during the original conversion.
-;; We simply have to create a mask and make sure we are adding together only the lanes that need
-;; to be accounted for. Digesting it all the steps then are:
-;;
-;; Step 1 - Account for NaN and negative floats by setting these src values to zero.
-;; Step 2 - Make a copy (tmp1) of the src value since we need to convert twice for
-;;          reasons described above.
-;; Step 3 - Convert the original src values. This will convert properly all floats up to INT_MAX
-;; Step 4 - Subtract INT_MAX from the copy set (tmp1). Note, all zero and negative values are those
-;;          values that were originally in the range (0..INT_MAX). This will come in handy during
-;;          step 7 when we zero negative lanes.
-;; Step 5 - Create a bit mask for tmp1 that will correspond to all lanes originally less than
-;;          UINT_MAX that are now less than INT_MAX thanks to the subtraction.
-;; Step 6 - Convert the second set of values (tmp1)
-;; Step 7 - Prep the converted second set by zeroing out negative lanes (these have already been
-;;          converted correctly with the first set) and by setting overflow lanes to 0x7FFFFFFF
-;;          as this will allow us to properly saturate overflow lanes when adding to 0x80000000
-;; Step 8 - Add the original converted src and the converted tmp1 where float values originally less
-;;          than and equal to INT_MAX will be unchanged, float values originally between INT_MAX+1 and
-;;          UINT_MAX will add together (INT_MAX) + (SRC - INT_MAX), and float values originally
-;;          greater than UINT_MAX will be saturated to UINT_MAX (0xFFFFFFFF) after adding (0x8000000 + 0x7FFFFFFF).
-;;
-;;
-;; The table below illustrates the result after each step where it matters for the converted set.
-;; Note the original value range (original src set) is the final dst in Step 8:
-;;
-;; Original src set:
-;; | Original Value Range |    Step 1    |         Step 3         |          Step 8           |
-;; |  -FLT_MIN..FLT_MAX   | 0.0..FLT_MAX | 0..INT_MAX(w/overflow) | 0..UINT_MAX(w/saturation) |
-;;
-;; Copied src set (tmp1):
-;; |    Step 2    |                  Step 4                  |
-;; | 0.0..FLT_MAX | (0.0-(INT_MAX+1))..(FLT_MAX-(INT_MAX+1)) |
-;;
-;; |                       Step 6                        |                 Step 7                 |
-;; | (0-(INT_MAX+1))..(UINT_MAX-(INT_MAX+1))(w/overflow) | ((INT_MAX+1)-(INT_MAX+1))..(INT_MAX+1) |
-(rule 1 (lower (has_type $I32X4 (fcvt_to_uint_sat val @ (value_type $F32X4))))
-      (let ((src Xmm val)
-
-            ;; Converting to unsigned int so if float src is negative or NaN
-            ;; will first set to zero.
-            (tmp2 Xmm (xmm_zero $F32X4))
-            (dst Xmm (x64_maxps src tmp2))
-
-            ;; Set tmp2 to INT_MAX+1. It is important to note here that after it looks
-            ;; like we are only converting INT_MAX (0x7FFFFFFF) but in fact because
-            ;; single precision IEEE-754 floats can only accurately represent contiguous
-            ;; integers up to 2^23 and outside of this range it rounds to the closest
-            ;; integer that it can represent. In the case of INT_MAX, this value gets
-            ;; represented as 0x4f000000 which is the integer value (INT_MAX+1).
-            (tmp2 Xmm (x64_pcmpeqd tmp2 tmp2))
-            (tmp2 Xmm (x64_psrld tmp2 (xmi_imm 1)))
-            (tmp2 Xmm (x64_cvtdq2ps tmp2))
-
-            ;; Make a copy of these lanes and then do the first conversion.
-            ;; Overflow lanes greater than the maximum allowed signed value will
-            ;; set to 0x80000000. Negative and NaN lanes will be 0x0
-            (tmp1 Xmm dst)
-            (dst Xmm (x64_cvttps2dq dst))
-
-            ;; Set lanes to src - max_signed_int
-            (tmp1 Xmm (x64_subps tmp1 tmp2))
-
-            ;; Create mask for all positive lanes to saturate (i.e. greater than
-            ;; or equal to the maxmimum allowable unsigned int).
-            (tmp2 Xmm (x64_cmpps tmp2 tmp1 (FcmpImm.LessThanOrEqual)))
-
-            ;; Convert those set of lanes that have the max_signed_int factored out.
-            (tmp1 Xmm (x64_cvttps2dq tmp1))
-
-            ;; Prepare converted lanes by zeroing negative lanes and prepping lanes
-            ;; that have positive overflow (based on the mask) by setting these lanes
-            ;; to 0x7FFFFFFF
-            (tmp1 Xmm (x64_pxor tmp1 tmp2))
-            (tmp2 Xmm (xmm_zero $I32X4))
-            (tmp1 Xmm (lower_vec_smax $I32X4 tmp1 tmp2)))
-
-        ;; Add this second set of converted lanes to the original to properly handle
-        ;; values greater than max signed int.
-        (x64_paddd tmp1 dst)))
-
-;; Rules for `x86_cvtt2dq` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I32X4 (x86_cvtt2dq val @ (value_type $F32X4))))
-      (x64_cvttps2dq val))
-
-;; Rules for `iadd_pairwise` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I8X16 (iadd_pairwise x y)))
-      (let (
-          ;; Shuffle all the even lanes of `x` and `y` into one register
-          (even_lane_mask Xmm (x64_movdqu_load (emit_u128_le_const 0x00ff_00ff_00ff_00ff_00ff_00ff_00ff_00ff)))
-          (x_evens Xmm (x64_pand x even_lane_mask))
-          (y_evens Xmm (x64_pand y even_lane_mask))
-          (evens Xmm (x64_packuswb x_evens y_evens))
-
-          ;; Shuffle all the odd lanes of `x` and `y` into one register
-          (x_odds Xmm (x64_psrlw x (xmi_imm 8)))
-          (y_odds Xmm (x64_psrlw y (xmi_imm 8)))
-          (odds Xmm (x64_packuswb x_odds y_odds))
-        )
-        (x64_paddb evens odds)))
-
-
-(rule 1 (lower (has_type $I16X8 (iadd_pairwise x y)))
-        (if-let $true (use_ssse3))
-        (x64_phaddw x y))
-
-(rule (lower (has_type $I16X8 (iadd_pairwise x y)))
-      (let (
-          (x Xmm x)
-          (y Xmm y)
-
-          ;; Shuffle the even-numbered 16-bit lanes into low four lanes of each
-          ;; vector by shuffling 16-bit lanes then shuffling 32-bit lanes.
-          ;; With these in place generate a new vector from the two low 64-bits
-          ;; of each vector (the low four 16-bit lanes).
-          ;;
-          ;; 0xe8 == 0b11_10_10_00
-          (x_evens Xmm (x64_pshufd (x64_pshufhw (x64_pshuflw x 0xe8) 0xe8) 0xe8))
-          (y_evens Xmm (x64_pshufd (x64_pshufhw (x64_pshuflw y 0xe8) 0xe8) 0xe8))
-          (evens Xmm (x64_punpcklqdq x_evens y_evens))
-
-          ;; Shuffle the odd-numbered 16-bit lanes into the low 8 lanes by
-          ;; performing `sshr` operation on 32-bit lanes, effectively moving the
-          ;; odd lanes into even lanes while leaving their sign bits in the
-          ;; odd lanes. The `packssdw` instruction then conveniently will
-          ;; put everything into one vector for us.
-          (x_shifted Xmm (x64_psrad x (xmi_imm 16)))
-          (y_shifted Xmm (x64_psrad y (xmi_imm 16)))
-          (odds Xmm (x64_packssdw x_shifted y_shifted))
-        )
-      (x64_paddw evens odds)))
-
-(rule 1 (lower (has_type $I32X4 (iadd_pairwise x y)))
-        (if-let $true (use_ssse3))
-        (x64_phaddd x y))
-
-(rule (lower (has_type $I32X4 (iadd_pairwise x y)))
-      (let (
-          (x Xmm x)
-          (y Xmm y)
-          ;; evens = [ x[0] x[2] y[0] y[2] ]
-          (evens Xmm (x64_shufps x y 0b10_00_10_00))
-          ;; odds  = [ x[1] x[3] y[1] y[3] ]
-          (odds  Xmm (x64_shufps x y 0b11_01_11_01))
-        )
-      (x64_paddd evens odds)))
-
-;; special case for the `i16x8.extadd_pairwise_i8x16_s` wasm instruction
-(rule 2 (lower
-        (has_type $I16X8 (iadd_pairwise
-                           (swiden_low val @ (value_type $I8X16))
-                           (swiden_high val))))
-      (if-let $true (use_ssse3))
-      (let ((mul_const Xmm (x64_xmm_load_const $I8X16
-              (emit_u128_le_const 0x01010101010101010101010101010101))))
-        (x64_pmaddubsw mul_const val)))
-
-;; special case for the `i32x4.extadd_pairwise_i16x8_s` wasm instruction
-(rule 2 (lower
-        (has_type $I32X4 (iadd_pairwise
-                           (swiden_low val @ (value_type $I16X8))
-                           (swiden_high val))))
-      (let ((mul_const XmmMem (emit_u128_le_const 0x0001_0001_0001_0001_0001_0001_0001_0001)))
-        (x64_pmaddwd val mul_const)))
-
-;; special case for the `i16x8.extadd_pairwise_i8x16_u` wasm instruction
-(rule 2 (lower
-        (has_type $I16X8 (iadd_pairwise
-                           (uwiden_low val @ (value_type $I8X16))
-                           (uwiden_high val))))
-      (if-let $true (use_ssse3))
-      (let ((mul_const XmmMem (emit_u128_le_const 0x01010101010101010101010101010101)))
-        (x64_pmaddubsw val mul_const)))
-
-;; special case for the `i32x4.extadd_pairwise_i16x8_u` wasm instruction
-(rule 2 (lower
-        (has_type $I32X4 (iadd_pairwise
-                           (uwiden_low val @ (value_type $I16X8))
-                           (uwiden_high val))))
-      (let ((xor_const XmmMem (emit_u128_le_const 0x8000_8000_8000_8000_8000_8000_8000_8000))
-            (dst Xmm (x64_pxor val xor_const))
-
-            (madd_const XmmMem (emit_u128_le_const 0x0001_0001_0001_0001_0001_0001_0001_0001))
-            (dst Xmm (x64_pmaddwd dst madd_const))
-
-            (addd_const XmmMem (emit_u128_le_const 0x00010000_00010000_00010000_00010000)))
-        (x64_paddd dst addd_const)))
-
-;; special case for the `i32x4.dot_i16x8_s` wasm instruction
-(rule 2 (lower
-        (has_type $I32X4 (iadd_pairwise
-                           (imul (swiden_low x) (swiden_low y))
-                           (imul (swiden_high x) (swiden_high y)))))
-      (x64_pmaddwd x y))
-
-;; Rules for `swiden_low` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; With SSE4.1 use the `pmovsx*` instructions for this
-(rule 1 (lower (has_type $I16X8 (swiden_low val @ (value_type $I8X16))))
-        (if-let $true (use_sse41))
-        (x64_pmovsxbw val))
-(rule 1 (lower (has_type $I32X4 (swiden_low val @ (value_type $I16X8))))
-        (if-let $true (use_sse41))
-        (x64_pmovsxwd val))
-(rule 1 (lower (has_type $I64X2 (swiden_low val @ (value_type $I32X4))))
-        (if-let $true (use_sse41))
-        (x64_pmovsxdq val))
-
-(rule (lower (has_type ty (swiden_low val))) (lower_swiden_low ty val))
-
-(decl lower_swiden_low (Type Xmm) Xmm)
-
-;; Duplicate the low lanes next to each other, then perform a wider shift-right
-;; by the low lane width to move the upper of each pair back into the lower lane
-;; of each pair, achieving the widening of the lower lanes.
-(rule (lower_swiden_low $I16X8 val)
-      (x64_psraw (x64_punpcklbw val val) (xmi_imm 8)))
-(rule (lower_swiden_low $I32X4 val)
-      (x64_psrad (x64_punpcklwd val val) (xmi_imm 16)))
-
-;; Generate the sign-extended halves with a `val < 0` comparison (expressed
-;; reversed here), then interleave the low 32-bit halves to create the full
-;; 64-bit results.
-(rule (lower_swiden_low $I64X2 val)
-      (let ((tmp Xmm (x64_pcmpgtd (xmm_zero $I32X4) val)))
-      (x64_punpckldq val tmp)))
-
-;; Rules for `swiden_high` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Similar to `swiden_low` with SSE4.1 except that the upper lanes are moved
-;; to the lower lanes first.
-(rule 1 (lower (has_type $I16X8 (swiden_high val @ (value_type $I8X16))))
-        (if-let $true (use_sse41))
-        (if-let $true (use_ssse3))
-        (let ((x Xmm val))
-          (x64_pmovsxbw (x64_palignr x x 8))))
-(rule 1 (lower (has_type $I32X4 (swiden_high val @ (value_type $I16X8))))
-        (if-let $true (use_sse41))
-        (if-let $true (use_ssse3))
-        (let ((x Xmm val))
-          (x64_pmovsxwd (x64_palignr x x 8))))
-(rule 1 (lower (has_type $I64X2 (swiden_high val @ (value_type $I32X4))))
-        (if-let $true (use_sse41))
-        (x64_pmovsxdq (x64_pshufd val 0b11_10_11_10)))
-
-;; Similar to `swiden_low` versions but using `punpckh*` instructions to
-;; pair the high lanes next to each other.
-(rule (lower (has_type $I16X8 (swiden_high val @ (value_type $I8X16))))
-      (let ((val Xmm val))
-        (x64_psraw (x64_punpckhbw val val) (xmi_imm 8))))
-(rule (lower (has_type $I32X4 (swiden_high val @ (value_type $I16X8))))
-      (let ((val Xmm val))
-        (x64_psrad (x64_punpckhwd val val) (xmi_imm 16))))
-
-;; Same as `swiden_low`, but `val` has its high lanes moved down.
-(rule (lower (has_type $I64X2 (swiden_high val @ (value_type $I32X4))))
-      (let ((val Xmm (x64_pshufd val 0b00_00_11_10))
-            (tmp Xmm (x64_pcmpgtd (xmm_zero $I32X4) val)))
-      (x64_punpckldq val tmp)))
-
-;; Rules for `uwiden_low` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; With SSE4.1 use the `pmovzx*` instructions for this
-(rule 1 (lower (has_type $I16X8 (uwiden_low val @ (value_type $I8X16))))
-        (if-let $true (use_sse41))
-        (x64_pmovzxbw val))
-(rule 1 (lower (has_type $I32X4 (uwiden_low val @ (value_type $I16X8))))
-        (if-let $true (use_sse41))
-        (x64_pmovzxwd val))
-(rule 1 (lower (has_type $I64X2 (uwiden_low val @ (value_type $I32X4))))
-        (if-let $true (use_sse41))
-        (x64_pmovzxdq val))
-
-(rule (lower (has_type ty (uwiden_low val))) (lower_uwiden_low ty val))
-
-;; Interleave an all-zero register with the low lanes to produce zero-extended
-;; results.
-(decl lower_uwiden_low (Type Xmm) Xmm)
-(rule (lower_uwiden_low $I16X8 val) (x64_punpcklbw val (xmm_zero $I8X16)))
-(rule (lower_uwiden_low $I32X4 val) (x64_punpcklwd val (xmm_zero $I8X16)))
-(rule (lower_uwiden_low $I64X2 val) (x64_unpcklps val (xmm_zero $F32X4)))
-
-;; Rules for `uwiden_high` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Same as `uwiden_high`, but interleaving high lanes instead.
-;;
-;; Note that according to `llvm-mca` at least these instructions are faster
-;; than using `pmovzx*` in terms of cycles, even if SSE4.1 is available.
-(rule (lower (has_type $I16X8 (uwiden_high val @ (value_type $I8X16))))
-      (x64_punpckhbw val (xmm_zero $I8X16)))
-(rule (lower (has_type $I32X4 (uwiden_high val @ (value_type $I16X8))))
-      (x64_punpckhwd val (xmm_zero $I8X16)))
-(rule (lower (has_type $I64X2 (uwiden_high val @ (value_type $I32X4))))
-      (x64_unpckhps val (xmm_zero $F32X4)))
-
-;; Rules for `snarrow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I8X16 (snarrow a @ (value_type $I16X8) b)))
-      (x64_packsswb a b))
-
-(rule (lower (has_type $I16X8 (snarrow a @ (value_type $I32X4) b)))
-      (x64_packssdw a b))
-
-;; We're missing a `snarrow` case for $I64X2
-;; https://github.com/bytecodealliance/wasmtime/issues/4734
-
-;; This rule is a special case for handling the translation of the wasm op
-;; `i32x4.trunc_sat_f64x2_s_zero`. It can be removed once we have an
-;; implementation of `snarrow` for `I64X2`.
-(rule (lower (has_type $I32X4 (snarrow (has_type $I64X2 (fcvt_to_sint_sat val))
-                                       (vconst (u128_from_constant 0)))))
-      (let ((a Xmm val)
-
-            ;; y = i32x4.trunc_sat_f64x2_s_zero(x) is lowered to:
-            ;; MOVE xmm_tmp, xmm_x
-            ;; CMPEQPD xmm_tmp, xmm_x
-            ;; MOVE xmm_y, xmm_x
-            ;; ANDPS xmm_tmp, [wasm_f64x2_splat(2147483647.0)]
-            ;; MINPD xmm_y, xmm_tmp
-            ;; CVTTPD2DQ xmm_y, xmm_y
-
-            (tmp1 Xmm (x64_cmppd a a (FcmpImm.Equal)))
-
-            ;; 2147483647.0 is equivalent to 0x41DFFFFFFFC00000
-            (umax_mask XmmMem (emit_u128_le_const 0x41DFFFFFFFC00000_41DFFFFFFFC00000))
-
-            ;; ANDPD xmm_y, [wasm_f64x2_splat(2147483647.0)]
-            (tmp1 Xmm (x64_andps tmp1 umax_mask))
-            (dst Xmm (x64_minpd a tmp1)))
-        (x64_cvttpd2dq dst)))
-
-;; This rule is a special case for handling the translation of the wasm op
-;; `i32x4.relaxed_trunc_f64x2_s_zero`.
-(rule (lower (has_type $I32X4 (snarrow (has_type $I64X2 (x86_cvtt2dq val))
-                                       (vconst (u128_from_constant 0)))))
-        (x64_cvttpd2dq val))
-
-;; Rules for `unarrow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $I8X16 (unarrow a @ (value_type $I16X8) b)))
-      (x64_packuswb a b))
-
-(rule 1 (lower (has_type $I16X8 (unarrow a @ (value_type $I32X4) b)))
-        (if-let $true (use_sse41))
-        (x64_packusdw a b))
-
-;; For each input `a` and `b` take the four 32-bit lanes and compress them to
-;; the low 64-bits of the vector as four 16-bit lanes. Then these are woven
-;; into one final vector with a `punpcklqdq`.
-;;
-;; If this is performance sensitive then it's probably best to upgrade the CPU
-;; to get the above single-instruction lowering.
-(rule (lower (has_type $I16X8 (unarrow a @ (value_type $I32X4) b)))
-      (let (
-          (a Xmm (unarrow_i32x4_lanes_to_low_u16_lanes a))
-          (b Xmm (unarrow_i32x4_lanes_to_low_u16_lanes b))
-        )
-        (x64_punpcklqdq a b)))
-
-(decl unarrow_i32x4_lanes_to_low_u16_lanes (Xmm) Xmm)
-(rule (unarrow_i32x4_lanes_to_low_u16_lanes val)
-      (let (
-          ;; First convert all negative values in `val` to zero lanes.
-          (val_gt_zero Xmm (x64_pcmpgtd val (xmm_zero $I32X4)))
-          (val Xmm (x64_pand val val_gt_zero))
-
-          ;; Next clamp all larger-than-u16-max lanes to u16::MAX.
-          (max Xmm (x64_movdqu_load (emit_u128_le_const 0x0000ffff_0000ffff_0000ffff_0000ffff)))
-          (cmp Xmm (x64_pcmpgtd max val))
-          (valid_lanes Xmm (x64_pand val cmp))
-          (clamped_lanes Xmm (x64_pandn cmp max))
-          (val Xmm (x64_por valid_lanes clamped_lanes))
-
-          ;; Within each 64-bit half of the 32x4 vector move the first 16 bits
-          ;; and the third 16 bits to the bottom of the half. Afterwards
-          ;; for the 32x4 vector move the first and third lanes to the bottom
-          ;; lanes, which finishes up the conversion here as all the lanes
-          ;; are now converted to 16-bit values in the low 4 lanes.
-          (val Xmm (x64_pshuflw val 0b00_00_10_00))
-          (val Xmm (x64_pshufhw val 0b00_00_10_00))
-        )
-        (x64_pshufd val 0b00_00_10_00)))
-
-
-;; We're missing a `unarrow` case for $I64X2
-;; https://github.com/bytecodealliance/wasmtime/issues/4734
-
-;; Rules for `bitcast` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule -3 (lower (has_type (is_gpr_type (fits_in_64 ty)) (bitcast _ src @ (value_type (is_xmm_type _)))))
-      (bitcast_xmm_to_gpr (ty_bits ty) src))
-
-(rule -2 (lower (has_type (is_xmm_type (fits_in_64 ty)) (bitcast _ src @ (value_type (is_gpr_type _)))))
-      (bitcast_gpr_to_xmm (ty_bits ty) src))
-
-(rule -1 (lower (has_type $I128 (bitcast _ src @ (value_type (is_xmm_type _)))))
-      (bitcast_xmm_to_gprs src))
-
-(rule 0 (lower (has_type (is_xmm_type _) (bitcast _ src @ (value_type $I128))))
-      (bitcast_gprs_to_xmm src))
-
-;; Bitcast between types residing in GPR registers is a no-op.
-(rule 1 (lower (has_type (is_gpr_type _)
-                         (bitcast _ x @ (value_type (is_gpr_type _)))))
-      x)
-
-;; Bitcasts between `r{32,64}` and `i{32,64}` need to be a copy to avoid
-;; conflicting regalloc constraints on reference type values that both need to
-;; be in some register but also some safepoint stack slot at the same time.
-(rule 2 (lower (has_type (is_gpr_type dst_ty)
-                         (bitcast _ x @ (value_type (is_gpr_type src_ty)))))
-      (if-let $true (is_ref_type src_ty))
-      (if-let $false (is_ref_type dst_ty))
-      (copy_gpr dst_ty x))
-(rule 2 (lower (has_type (is_gpr_type dst_ty)
-                         (bitcast _ x @ (value_type (is_gpr_type src_ty)))))
-      (if-let $false (is_ref_type src_ty))
-      (if-let $true (is_ref_type dst_ty))
-      (copy_gpr dst_ty x))
-
-;; Bitcast between types residing in XMM registers is a no-op.
-(rule 3 (lower (has_type (is_xmm_type _)
-                         (bitcast _ x @ (value_type (is_xmm_type _)))))
-      x)
-
-;; Rules for `fcopysign` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type $F32 (fcopysign a @ (value_type $F32) b)))
-      (let ((sign_bit Xmm (imm $F32 0x80000000)))
-        (x64_orps
-          (x64_andnps sign_bit a)
-          (x64_andps sign_bit b))))
-
-(rule (lower (has_type $F64 (fcopysign a @ (value_type $F64) b)))
-      (let ((sign_bit Xmm (imm $F64 0x8000000000000000)))
-        (x64_orpd
-          (x64_andnpd sign_bit a)
-          (x64_andpd sign_bit b))))
-
-;; Helper for the `ceil`/`floor`/`nearest`/`trunc` instructions ;;;;;;;;;;;;;;;;
-
-;; Emits either a `round{ss,sd,ps,pd}` instruction, as appropriate, or generates
-;; the appropriate libcall and sequence to call that.
-(decl x64_round (Type RegMem RoundImm) Xmm)
-(rule 1 (x64_round $F32 a imm)
-        (if-let $true (use_sse41))
-        (x64_roundss a imm))
-(rule 1 (x64_round $F64 a imm)
-        (if-let $true (use_sse41))
-        (x64_roundsd a imm))
-(rule 1 (x64_round $F32X4 a imm)
-        (if-let $true (use_sse41))
-        (x64_roundps a imm))
-(rule 1 (x64_round $F64X2 a imm)
-        (if-let $true (use_sse41))
-        (x64_roundpd a imm))
-
-(rule (x64_round $F32 (RegMem.Reg a) imm) (libcall_1 (round_libcall $F32 imm) a))
-(rule (x64_round $F64 (RegMem.Reg a) imm) (libcall_1 (round_libcall $F64 imm) a))
-(rule (x64_round $F32X4 (RegMem.Reg a) imm)
-      (let (
-          (libcall LibCall (round_libcall $F32 imm))
-          (result Xmm (libcall_1 libcall a))
-          (a1 Xmm (libcall_1 libcall (x64_pshufd a 1)))
-          (result Xmm (f32x4_insertlane result a1 1))
-          (a2 Xmm (libcall_1 libcall (x64_pshufd a 2)))
-          (result Xmm (f32x4_insertlane result a2 2))
-          (a3 Xmm (libcall_1 libcall (x64_pshufd a 3)))
-          (result Xmm (f32x4_insertlane result a3 3))
-        )
-        result))
-(rule (x64_round $F64X2 (RegMem.Reg a) imm)
-      (let (
-          (libcall LibCall (round_libcall $F64 imm))
-          (result Xmm (libcall_1 libcall a))
-          (a1 Xmm (libcall_1 libcall (x64_pshufd a 0b00_00_11_10)))
-        )
-        (x64_movlhps result a1)))
-(rule (x64_round ty (RegMem.Mem addr) imm)
-      (x64_round ty (RegMem.Reg (x64_load ty addr (ExtKind.ZeroExtend))) imm))
-
-(decl round_libcall (Type RoundImm) LibCall)
-(rule (round_libcall $F32 (RoundImm.RoundUp)) (LibCall.CeilF32))
-(rule (round_libcall $F64 (RoundImm.RoundUp)) (LibCall.CeilF64))
-(rule (round_libcall $F32 (RoundImm.RoundDown)) (LibCall.FloorF32))
-(rule (round_libcall $F64 (RoundImm.RoundDown)) (LibCall.FloorF64))
-(rule (round_libcall $F32 (RoundImm.RoundNearest)) (LibCall.NearestF32))
-(rule (round_libcall $F64 (RoundImm.RoundNearest)) (LibCall.NearestF64))
-(rule (round_libcall $F32 (RoundImm.RoundZero)) (LibCall.TruncF32))
-(rule (round_libcall $F64 (RoundImm.RoundZero)) (LibCall.TruncF64))
-
-;; Rules for `ceil` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (ceil a @ (value_type ty)))
-      (x64_round ty a (RoundImm.RoundUp)))
-
-;; Rules for `floor` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (floor a @ (value_type ty)))
-      (x64_round ty a (RoundImm.RoundDown)))
-
-;; Rules for `nearest` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (nearest a @ (value_type ty)))
-      (x64_round ty a (RoundImm.RoundNearest)))
-
-;; Rules for `trunc` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (trunc a @ (value_type ty)))
-      (x64_round ty a (RoundImm.RoundZero)))
-
-;; Rules for `stack_addr` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (stack_addr stack_slot offset))
-      (stack_addr_impl stack_slot offset))
-
-;; Rules for `udiv` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; NB: a `RegMem` divisor, while allowed in the instruction encoding, isn't
-;; used right now to prevent a possibly-trapping load getting folded into the
-;; `div` instruction. Ideally non-trapping loads would get folded, however, or
-;; alternatively Wasmtime/Cranelift would grow support for multiple traps on
-;; a single opcode and the signal kind would differentiate at runtime.
-
-;; The inputs to the `div` instruction are different for 8-bit division so
-;; it needs a special case here since the instruction being crafted has a
-;; different shape.
-(rule 2 (lower (udiv a @ (value_type $I8) b))
-        (x64_div8 (extend_to_gpr a $I32 (ExtendKind.Zero))
-                  (put_in_gpr b)
-                  (DivSignedness.Unsigned)
-                  (TrapCode.IntegerDivisionByZero)))
-
-;; 16-to-64-bit division is all done with a similar instruction and the only
-;; tricky requirement here is that when div traps are disallowed the divisor
-;; must not be zero.
-(rule 1 (lower (udiv a @ (value_type (fits_in_64 ty)) b))
-        (x64_div_quotient a
-                          (imm $I64 0)
-                          (put_in_gpr b)
-                          (raw_operand_size_of_type ty)
-                          (DivSignedness.Unsigned)
-                          (TrapCode.IntegerDivisionByZero)))
-
-;; Rules for `sdiv` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 2 (lower (sdiv a @ (value_type $I8) b))
-        (x64_div8 (x64_sign_extend_data a (OperandSize.Size8))
-                  (nonzero_sdiv_divisor $I8 b)
-                  (DivSignedness.Signed)
-                  (TrapCode.IntegerOverflow)))
-
-(rule 1 (lower (sdiv a @ (value_type (fits_in_64 ty)) b))
-        (let (
-            (a Gpr a)
-            (size OperandSize (raw_operand_size_of_type ty))
-          )
-        (x64_div_quotient a
-                          (x64_sign_extend_data a size)
-                          (nonzero_sdiv_divisor ty b)
-                          size
-                          (DivSignedness.Signed)
-                          (TrapCode.IntegerOverflow))))
-
-;; Checks to make sure that the input `Value` is a non-zero value for `sdiv`.
-;;
-;; This is required to differentiate the divide-by-zero trap from the
-;; integer-overflow trap, the two trapping conditions of signed division.
-(decl nonzero_sdiv_divisor (Type Value) Reg)
-(rule 1 (nonzero_sdiv_divisor ty (iconst imm))
-        (if-let n (safe_divisor_from_imm64 ty imm))
-        (imm ty n))
-(rule 0 (nonzero_sdiv_divisor ty val)
-      (let (
-          (val Reg val)
-          (_ InstOutput (side_effect (with_flags_side_effect
-            (x64_test (raw_operand_size_of_type ty) val val)
-            (trap_if (CC.Z) (TrapCode.IntegerDivisionByZero)))))
-        )
-        val))
-
-;; Rules for `urem` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; The remainder is in AH, so take the result of the division and right-shift
-;; by 8.
-(rule 2 (lower (urem a @ (value_type $I8) b))
-        (let (
-            (result Gpr (x64_div8 (extend_to_gpr a $I32 (ExtendKind.Zero))
-                                  (put_in_gpr b) ;; see `udiv` for why not `gpr_mem`
-                                  (DivSignedness.Unsigned)
-                                  (TrapCode.IntegerDivisionByZero)))
-          )
-          (x64_shr $I64 result (Imm8Reg.Imm8 8))))
-
-(rule 1 (lower (urem a @ (value_type (fits_in_64 ty)) b))
-        (x64_div_remainder a
-                           (imm $I64 0)
-                           (put_in_gpr b) ;; see `udiv` for why not `gpr_mem`
-                           (raw_operand_size_of_type ty)
-                           (DivSignedness.Unsigned)
-                           (TrapCode.IntegerDivisionByZero)))
-
-;; Rules for `srem` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Special-cases first for constant `srem` where the checks for 0 and -1 aren't
-;; applicable.
-;;
-;; Note that like `urem` for i8 types the result is in AH so to get the result
-;; it's right-shifted down.
-(rule 3 (lower (srem a @ (value_type $I8) (iconst imm)))
-        (if-let n (safe_divisor_from_imm64 $I8 imm))
-        (let (
-            (a Gpr (x64_sign_extend_data a (OperandSize.Size8)))
-            (result Gpr (x64_div8 a (imm $I8 n) (DivSignedness.Signed) (TrapCode.IntegerDivisionByZero)))
-          )
-          (x64_shr $I64 result (Imm8Reg.Imm8 8))))
-
-;; Same as the above rule but for 16-to-64 bit types.
-(rule 2 (lower (srem a @ (value_type ty) (iconst imm)))
-        (if-let n (safe_divisor_from_imm64 ty imm))
-        (let (
-            (a Gpr a)
-            (size OperandSize (raw_operand_size_of_type ty))
-          )
-          (x64_div_remainder a
-                             (x64_sign_extend_data a size)
-                             (imm ty n)
-                             size
-                             (DivSignedness.Signed)
-                             (TrapCode.IntegerDivisionByZero))))
-
-(rule 1 (lower (srem a @ (value_type $I8) b))
-        (let (
-            (a Gpr (x64_sign_extend_data a (OperandSize.Size8)))
-          )
-          (x64_shr $I64 (x64_checked_srem_seq8 a b) (Imm8Reg.Imm8 8))))
-
-(rule (lower (srem a @ (value_type ty) b))
-      (let (
-          (a Gpr a)
-          (size OperandSize (raw_operand_size_of_type ty))
-          (hi Gpr (x64_sign_extend_data a size))
-          (tmp ValueRegs (x64_checked_srem_seq size a hi b))
-        )
-        (value_regs_get tmp 1)))
-
-;; Rules for `umulhi` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 0 (lower (umulhi a @ (value_type $I8) b))
-        (x64_shr $I16 (x64_mul8 $false a b) (imm8_to_imm8_gpr 8)))
-
-(rule 1 (lower (umulhi a @ (value_type (ty_int_ref_16_to_64 ty)) b))
-        (value_regs_get_gpr (x64_mul ty $false a b) 1))
-
-;; Rules for `smulhi` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 0 (lower (smulhi a @ (value_type $I8) b))
-        (x64_sar $I16 (x64_mul8 $true a b) (imm8_to_imm8_gpr 8)))
-
-(rule 1 (lower (smulhi a @ (value_type (ty_int_ref_16_to_64 ty)) b))
-        (value_regs_get_gpr (x64_mul ty $true a b) 1))
-
-;; Rules for `get_pinned_reg` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (get_pinned_reg))
-      (read_pinned_gpr))
-
-;; Rules for `set_pinned_reg` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (set_pinned_reg a @ (value_type ty)))
-      (side_effect (write_pinned_gpr a)))
-
-;; Rules for `vconst` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type ty (vconst const)))
-      ;; TODO use Inst::gen_constant() instead.
-      (x64_xmm_load_const ty (const_to_vconst const)))
-
-;; Special cases for known constant patterns to skip a 16-byte load.
-(rule 1 (lower (has_type ty (vconst (u128_from_constant 0)))) (xmm_zero ty))
-(rule 1 (lower (has_type ty (vconst (u128_from_constant -1)))) (vector_all_ones))
-
-;; Rules for `shuffle` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Special case for `pblendw` which takes an 8-bit immediate where each bit
-;; indicates which lane of the two operands is chosen for the output. A bit of
-;; 0 chooses the corresponding 16-it lane from `a` and a bit of 1 chooses the
-;; corresponding 16-bit lane from `b`.
-(rule 14 (lower (shuffle a b (pblendw_imm n)))
-         (if-let $true (use_sse41))
-         (x64_pblendw a b n))
-(decl pblendw_imm (u8) Immediate)
-(extern extractor pblendw_imm pblendw_imm)
-
-;; When the shuffle looks like "concatenate `a` and `b` and shift right by n*8
-;; bytes", that's a `palignr` instruction. Note that the order of operands are
-;; swapped in the instruction here. The `palignr` instruction uses the second
-;; operand as the low-order bytes and the first operand as high-order bytes,
-;; so put `a` second.
-(rule 13 (lower (shuffle a b (palignr_imm_from_immediate n)))
-         (if-let $true (use_ssse3))
-         (x64_palignr b a n))
-(decl palignr_imm_from_immediate (u8) Immediate)
-(extern extractor palignr_imm_from_immediate palignr_imm_from_immediate)
-
-;; Special case the `pshuf{l,h}w` instruction which shuffles four 16-bit
-;; integers within one value, preserving the other four 16-bit integers in that
-;; value (either the high or low half). The complicated logic is in the
-;; extractors here implemented in Rust and note that there's two cases for each
-;; instruction here to match when either the first or second shuffle operand is
-;; used.
-(rule 12 (lower (shuffle x y (pshuflw_lhs_imm imm)))
-      (x64_pshuflw x imm))
-(rule 11 (lower (shuffle x y (pshuflw_rhs_imm imm)))
-      (x64_pshuflw y imm))
-(rule 10 (lower (shuffle x y (pshufhw_lhs_imm imm)))
-      (x64_pshufhw x imm))
-(rule 9 (lower (shuffle x y (pshufhw_rhs_imm imm)))
-      (x64_pshufhw y imm))
-
-(decl pshuflw_lhs_imm (u8) Immediate)
-(extern extractor pshuflw_lhs_imm pshuflw_lhs_imm)
-(decl pshuflw_rhs_imm (u8) Immediate)
-(extern extractor pshuflw_rhs_imm pshuflw_rhs_imm)
-(decl pshufhw_lhs_imm (u8) Immediate)
-(extern extractor pshufhw_lhs_imm pshufhw_lhs_imm)
-(decl pshufhw_rhs_imm (u8) Immediate)
-(extern extractor pshufhw_rhs_imm pshufhw_rhs_imm)
-
-;; Special case for the `pshufd` instruction which will permute 32-bit values
-;; within a single register. This is only applicable if the `imm` specified
-;; selects 32-bit values from either `x` or `y`, but not both. This means
-;; there's one rule for selecting from `x` and another rule for selecting from
-;; `y`.
-(rule 8 (lower (shuffle x y (pshufd_lhs_imm imm)))
-      (x64_pshufd x imm))
-(rule 7 (lower (shuffle x y (pshufd_rhs_imm imm)))
-      (x64_pshufd y imm))
-
-(decl pshufd_lhs_imm (u8) Immediate)
-(extern extractor pshufd_lhs_imm pshufd_lhs_imm)
-(decl pshufd_rhs_imm (u8) Immediate)
-(extern extractor pshufd_rhs_imm pshufd_rhs_imm)
-
-;; Special case for i8-level interleaving of upper/low bytes.
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1f0f_1e0e_1d0d_1c0c_1b0b_1a0a_1909_1808)))
-      (x64_punpckhbw a b))
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1707_1606_1505_1404_1303_1202_1101_1000)))
-      (x64_punpcklbw a b))
-
-;; Special case for i16-level interleaving of upper/low bytes.
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1f1e_0f0e_1d1c_0d0c_1b1a_0b0a_1918_0908)))
-      (x64_punpckhwd a b))
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1716_0706_1514_0504_1312_0302_1110_0100)))
-      (x64_punpcklwd a b))
-
-;; Special case for i32-level interleaving of upper/low bytes.
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1f1e1d1c_0f0e0d0c_1b1a1918_0b0a0908)))
-      (x64_punpckhdq a b))
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x17161514_07060504_13121110_03020100)))
-      (x64_punpckldq a b))
-
-;; Special case for i64-level interleaving of upper/low bytes.
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1f1e1d1c1b1a1918_0f0e0d0c0b0a0908)))
-      (x64_punpckhqdq a b))
-(rule 6 (lower (shuffle a b (u128_from_immediate 0x1716151413121110_0706050403020100)))
-      (x64_punpcklqdq a b))
-
-;; If the vector shift mask is all 0s then that means the first byte of the
-;; first operand is broadcast to all bytes. Falling through would load an
-;; all-zeros constant from a rip-relative location but it should be slightly
-;; more efficient to execute the `pshufb` here-and-now with an xor'd-to-be-zero
-;; register.
-(rule 6 (lower (shuffle a _ (u128_from_immediate 0)))
-        (if-let $true (use_ssse3))
-        (x64_pshufb a (xmm_zero $I8X16)))
-
-;; Special case for the `shufps` instruction which will select two 32-bit values
-;; from the first operand and two 32-bit values from the second operand. Note
-;; that there is a second case here as well for when the operands can be
-;; swapped.
-;;
-;; Note that the priority of this instruction is currently lower than the above
-;; special cases since `shufps` handles many of them and for now it's
-;; hypothesized that the dedicated instructions are better than `shufps`.
-;; Someone with more knowledge about x86 timings should perhaps reorder the
-;; rules here eventually though.
-(rule 5 (lower (shuffle x y (shufps_imm imm)))
-      (x64_shufps x y imm))
-(rule 4 (lower (shuffle x y (shufps_rev_imm imm)))
-      (x64_shufps y x imm))
-
-(decl shufps_imm(u8) Immediate)
-(extern extractor shufps_imm shufps_imm)
-(decl shufps_rev_imm(u8) Immediate)
-(extern extractor shufps_rev_imm shufps_rev_imm)
-
-
-;; If `lhs` and `rhs` are the same we can use a single PSHUFB to shuffle the XMM
-;; register. We statically build `constructed_mask` to zero out any unknown lane
-;; indices (may not be completely necessary: verification could fail incorrect
-;; mask values) and fix the indexes to all point to the `dst` vector.
-(rule 3 (lower (shuffle a a (vec_mask_from_immediate mask)))
-        (if-let $true (use_ssse3))
-        (x64_pshufb a (shuffle_0_31_mask mask)))
-
-;; For the case where the shuffle mask contains out-of-bounds values (values
-;; greater than 31) we must mask off those resulting values in the result of
-;; `vpermi2b`.
-(rule 2 (lower (shuffle a b (vec_mask_from_immediate (perm_from_mask_with_zeros mask zeros))))
-      (if-let $true (use_avx512vl))
-      (if-let $true (use_avx512vbmi))
-      (x64_andps (x64_vpermi2b (x64_xmm_load_const $I8X16 mask) a b) zeros))
-
-;; However, if the shuffle mask contains no out-of-bounds values, we can use
-;; `vpermi2b` without any masking.
-(rule 1 (lower (shuffle a b (vec_mask_from_immediate mask)))
-      (if-let $true (use_avx512vl))
-      (if-let $true (use_avx512vbmi))
-      (x64_vpermi2b (x64_xmm_load_const $I8X16 (perm_from_mask mask)) a b))
-
-;; If `lhs` and `rhs` are different, we must shuffle each separately and then OR
-;; them together. This is necessary due to PSHUFB semantics. As in the case
-;; above, we build the `constructed_mask` for each case statically.
-(rule (lower (shuffle a b (vec_mask_from_immediate mask)))
-      (x64_por
-        (lower_pshufb a (shuffle_0_15_mask mask))
-        (lower_pshufb b (shuffle_16_31_mask mask))))
-
-;; Rules for `swizzle` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; SIMD swizzle; the following inefficient implementation is due to the Wasm
-;; SIMD spec requiring mask indexes greater than 15 to have the same semantics
-;; as a 0 index. For the spec discussion, see
-;; https://github.com/WebAssembly/simd/issues/93. The CLIF semantics match the
-;; Wasm SIMD semantics for this instruction. The instruction format maps to
-;; variables like: %dst = swizzle %src, %mask
-(rule (lower (swizzle src mask))
-      (let ((mask Xmm (x64_paddusb mask (emit_u128_le_const 0x70707070707070707070707070707070))))
-        (lower_pshufb src mask)))
-
-;; Rules for `x86_pshufb` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (x86_pshufb src mask))
-      (if-let $true (use_ssse3))
-      (x64_pshufb src mask))
-
-;; A helper function to generate either the `pshufb` instruction or a libcall to
-;; the `X86Pshufb` libcall. Note that the libcall is not exactly the most
-;; performant thing in the world so this is primarily here for completeness
-;; of lowerings on all x86 cpus but if rules are ideally gated on the presence
-;; of SSSE3 to use the `pshufb` instruction itself.
-(decl lower_pshufb (Xmm RegMem) Xmm)
-(rule 1 (lower_pshufb src mask)
-        (if-let $true (use_ssse3))
-        (x64_pshufb src mask))
-(rule (lower_pshufb src (RegMem.Reg mask))
-      (libcall_2 (LibCall.X86Pshufb) src mask))
-(rule (lower_pshufb src (RegMem.Mem addr))
-      (lower_pshufb src (x64_movdqu_load addr)))
-
-;; Rules for `extractlane` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Remove the extractlane instruction, leaving the float where it is. The upper
-;; bits will remain unchanged; for correctness, this relies on Cranelift type
-;; checking to avoid using those bits.
-(rule 3 (lower (has_type (ty_scalar_float _) (extractlane val 0)))
-        val)
-
-;; `f32x4.extract_lane N` where `N != 0`
-(rule 1 (lower (extractlane val @ (value_type $F32X4) (u8_from_uimm8 lane)))
-        (x64_pshufd val lane))
-
-;; `f64x2.extract_lane N` where `N != 0` (aka N == 1)
-(rule (lower (extractlane val @ (value_type $F64X2) 1))
-      (x64_pshufd val 0b11_10_11_10))
-
-;; `i8x16.extract_lane N`
-;;
-;; Note that without SSE4.1 a 16-bit lane extraction is performed and then
-;; the result is updated if the desired index is either odd or even.
-(rule 2 (lower (extractlane val @ (value_type ty @ $I8X16) (u8_from_uimm8 lane)))
-        (if-let $true (use_sse41))
-        (x64_pextrb val lane))
-;; extracting an odd lane has an extra shift-right
-(rule 1 (lower (extractlane val @ (value_type ty @ $I8X16) (u8_from_uimm8 lane)))
-        (if-let 1 (u8_and lane 1))
-        (x64_shr $I16 (x64_pextrw val (u8_shr lane 1)) (Imm8Reg.Imm8 8)))
-;; Extracting an even lane already has the desired lane in the lower bits. Note
-;; that having arbitrary upper bits in the returned register should be ok since
-;; all operators on the resulting `i8` type should work correctly regardless of
-;; the bits in the rest of the register.
-(rule (lower (extractlane val @ (value_type ty @ $I8X16) (u8_from_uimm8 lane)))
-      (if-let 0 (u8_and lane 1))
-      (x64_pextrw val (u8_shr lane 1)))
-
-;; `i16x8.extract_lane N`
-(rule (lower (extractlane val @ (value_type ty @ $I16X8) (u8_from_uimm8 lane)))
-      (x64_pextrw val lane))
-
-;; `i32x4.extract_lane N`
-(rule 2 (lower (extractlane val @ (value_type ty @ $I32X4) (u8_from_uimm8 lane)))
-        (if-let $true (use_sse41))
-        (x64_pextrd val lane))
-(rule 1 (lower (extractlane val @ (value_type $I32X4) 0))
-        (x64_movd_to_gpr val))
-(rule (lower (extractlane val @ (value_type $I32X4) (u8_from_uimm8 n)))
-      (x64_movd_to_gpr (x64_pshufd val n)))
-
-;; `i64x2.extract_lane N`
-(rule 1 (lower (extractlane val @ (value_type $I64X2) (u8_from_uimm8 lane)))
-        (if-let $true (use_sse41))
-        (x64_pextrq val lane))
-(rule (lower (extractlane val @ (value_type $I64X2) 0))
-      (x64_movq_to_gpr val))
-(rule (lower (extractlane val @ (value_type $I64X2) 1))
-      (x64_movq_to_gpr (x64_pshufd val 0b00_00_11_10)))
-
-;; Rules for `scalar_to_vector` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; Case 1: when moving a scalar float, we simply move from one XMM register
-;; to another, expecting the register allocator to elide this. Here we
-;; assume that the upper bits of a scalar float have not been munged with
-;; (the same assumption the old backend makes).
-(rule 1 (lower (scalar_to_vector src @ (value_type (ty_scalar_float _))))
-      src)
-
-;; Case 2: when moving a scalar value of any other type, use MOVD to zero
-;; the upper lanes.
-(rule (lower (scalar_to_vector src @ (value_type ty)))
-      (bitcast_gpr_to_xmm (ty_bits ty) src))
-
-;; Case 3: when presented with `load + scalar_to_vector`, coalesce into a single
-;; MOVSS/MOVSD instruction.
-(rule 2 (lower (scalar_to_vector (and (sinkable_load src) (value_type (ty_32 _)))))
-      (x64_movss_load src))
-(rule 3 (lower (scalar_to_vector (and (sinkable_load src) (value_type (ty_64 _)))))
-      (x64_movsd_load src))
-
-;; Rules for `splat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; For all the splat rules below one of the goals is that splatting a value
-;; doesn't end up accidentally depending on the previous value in a register.
-;; This means that instructions are chosen to avoid false dependencies where
-;; new values are created fresh or otherwise overwrite previous register
-;; contents where possible.
-;;
-;; Additionally splats are specialized to special-case load-and-splat which
-;; has a number of micro-optimizations available.
-
-;; i8x16 splats: use `vpbroadcastb` on AVX2 and otherwise `pshufb` broadcasts
-;; with a mask of zero which is calculated with an xor-against-itself register.
-(rule 0 (lower (has_type $I8X16 (splat src)))
-        (let ((src Xmm (x64_movd_to_xmm src)))
-          (x64_pshufd (x64_pshuflw (x64_punpcklbw src src) 0) 0)))
-(rule 1 (lower (has_type $I8X16 (splat src)))
-        (if-let $true (use_ssse3))
-        (x64_pshufb (bitcast_gpr_to_xmm 32 src) (xmm_zero $I8X16)))
-(rule 2 (lower (has_type $I8X16 (splat src)))
-        (if-let $true (use_avx2))
-        (x64_vpbroadcastb (bitcast_gpr_to_xmm 32 src)))
-(rule 3 (lower (has_type $I8X16 (splat (sinkable_load_exact addr))))
-        (if-let $true (use_sse41))
-        (if-let $true (use_ssse3))
-        (x64_pshufb (x64_pinsrb (xmm_uninit_value) addr 0) (xmm_zero $I8X16)))
-(rule 4 (lower (has_type $I8X16 (splat (sinkable_load_exact addr))))
-        (if-let $true (use_avx2))
-        (x64_vpbroadcastb addr))
-
-;; i16x8 splats: use `vpbroadcastw` on AVX2 and otherwise a 16-bit value is
-;; loaded into an xmm register, `pshuflw` broadcasts the low 16-bit lane
-;; to the low four lanes, and `pshufd` broadcasts the low 32-bit lane (which
-;; at that point is two of the 16-bit values we want to broadcast) to all the
-;; lanes.
-(rule 0 (lower (has_type $I16X8 (splat src)))
-        (x64_pshufd (x64_pshuflw (bitcast_gpr_to_xmm 32 src) 0) 0))
-(rule 1 (lower (has_type $I16X8 (splat src)))
-        (if-let $true (use_avx2))
-        (x64_vpbroadcastw (bitcast_gpr_to_xmm 32 src)))
-(rule 2 (lower (has_type $I16X8 (splat (sinkable_load_exact addr))))
-        (x64_pshufd (x64_pshuflw (x64_pinsrw (xmm_uninit_value) addr 0) 0) 0))
-(rule 3 (lower (has_type $I16X8 (splat (sinkable_load_exact addr))))
-        (if-let $true (use_avx2))
-        (x64_vpbroadcastw addr))
-
-;; i32x4.splat - use `vpbroadcastd` on AVX2 and otherwise `pshufd` can be
-;; used to broadcast the low lane to all other lanes.
-;;
-;; Note that sinkable-load cases come later
-(rule 0 (lower (has_type $I32X4 (splat src)))
-        (x64_pshufd (bitcast_gpr_to_xmm 32 src) 0))
-(rule 1 (lower (has_type $I32X4 (splat src)))
-        (if-let $true (use_avx2))
-        (x64_vpbroadcastd (bitcast_gpr_to_xmm 32 src)))
-
-;; f32x4.splat - the source is already in an xmm register so `shufps` is all
-;; that's necessary to complete the splat. This is specialized to `vbroadcastss`
-;; on AVX2 to leverage that specific instruction for this operation.
-(rule 0 (lower (has_type $F32X4 (splat src)))
-        (let ((tmp Xmm src))
-          (x64_shufps src src 0)))
-(rule 1 (lower (has_type $F32X4 (splat src)))
-        (if-let $true (use_avx2))
-        (x64_vbroadcastss src))
-
-;; t32x4.splat of a load - use a `movss` to load into an xmm register and then
-;; `shufps` broadcasts to the other lanes. Note that this is used for both i32
-;; and f32 splats.
-;;
-;; With AVX the `vbroadcastss` instruction suits this purpose precisely. Note
-;; that the memory-operand encoding of `vbroadcastss` is usable with AVX, but
-;; the register-based encoding is only available with AVX2. With the
-;; `sinkable_load` extractor this should be guaranteed to use the memory-based
-;; encoding hence the `use_avx` test.
-(rule 5 (lower (has_type (multi_lane 32 4) (splat (sinkable_load addr))))
-        (let ((tmp Xmm (x64_movss_load addr)))
-          (x64_shufps tmp tmp 0)))
-(rule 6 (lower (has_type (multi_lane 32 4) (splat (sinkable_load addr))))
-        (if-let $true (use_avx))
-        (x64_vbroadcastss addr))
-
-;; t64x2.splat - use `pshufd` to broadcast the lower 64-bit lane to the upper
-;; lane. A minor specialization for sinkable loads to avoid going through a gpr
-;; for i64 splats is used as well when `movddup` is available.
-(rule 0 (lower (has_type $I64X2 (splat src)))
-        (x64_pshufd (bitcast_gpr_to_xmm 64 src) 0b01_00_01_00))
-(rule 0 (lower (has_type $F64X2 (splat src)))
-        (x64_pshufd src 0b01_00_01_00))
-(rule 6 (lower (has_type (multi_lane 64 2) (splat (sinkable_load addr))))
-        (if-let $true (use_ssse3))
-        (x64_movddup addr))
-
-;; Rules for `vany_true` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (vany_true val))
-        (if-let $true (use_sse41))
-        (let ((val Xmm val))
-          (with_flags (x64_ptest val val) (x64_setcc (CC.NZ)))))
-
-;; Any nonzero byte in `val` means that any lane is true. Compare `val` with a
-;; zeroed register and extract the high bits to a gpr mask. If the mask is
-;; 0xffff then every byte was equal to zero, so test if the comparison is
-;; not-equal or NZ.
-(rule (lower (vany_true val))
-      (lower_icmp_bool (emit_vany_true val)))
-
-(decl emit_vany_true (Value) IcmpCondResult)
-(rule (emit_vany_true val)
-      (let (
-          (any_byte_zero Xmm (x64_pcmpeqb val (xmm_zero $I8X16)))
-          (mask Gpr (x64_pmovmskb (OperandSize.Size32) any_byte_zero))
-        )
-        (icmp_cond_result (x64_cmp_imm (OperandSize.Size32) mask 0xffff)
-                          (CC.NZ))))
-
-;; Rules for `vall_true` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (vall_true val))
-      (lower_icmp_bool (emit_vall_true val)))
-
-(decl emit_vall_true (Value) IcmpCondResult)
-(rule 1 (emit_vall_true val @ (value_type ty))
-        (if-let $true (use_sse41))
-        (let ((src Xmm val)
-              (zeros Xmm (xmm_zero ty))
-              (cmp Xmm (x64_pcmpeq (vec_int_type ty) src zeros)))
-          (icmp_cond_result (x64_ptest cmp cmp) (CC.Z))))
-
-;; Perform an appropriately-sized lane-wise comparison with zero. If the
-;; result is all 0s then all of them are true because nothing was equal to
-;; zero.
-(rule (emit_vall_true val @ (value_type ty))
-      (let ((lanes_with_zero Xmm (x64_pcmpeq (vec_int_type ty) val (xmm_zero ty)))
-            (mask Gpr (x64_pmovmskb (OperandSize.Size32) lanes_with_zero)))
-        (icmp_cond_result (x64_test (OperandSize.Size32) mask mask)
-                          (CC.Z))))
-
-;; Rules for `vhigh_bits` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; The Intel specification allows using both 32-bit and 64-bit GPRs as
-;; destination for the "move mask" instructions. This is controlled by the REX.R
-;; bit: "In 64-bit mode, the instruction can access additional registers when
-;; used with a REX.R prefix. The default operand size is 64-bit in 64-bit mode"
-;; (PMOVMSKB in IA Software Development Manual, vol. 2). This being the case, we
-;; will always clear REX.W since its use is unnecessary (`OperandSize` is used
-;; for setting/clearing REX.W) as we need at most 16 bits of output for
-;; `vhigh_bits`.
-
-(rule (lower (vhigh_bits val @ (value_type (multi_lane 8 16))))
-      (x64_pmovmskb (OperandSize.Size32) val))
-
-(rule (lower (vhigh_bits val @ (value_type (multi_lane 32 4))))
-      (x64_movmskps (OperandSize.Size32) val))
-
-(rule (lower (vhigh_bits val @ (value_type (multi_lane 64 2))))
-      (x64_movmskpd (OperandSize.Size32) val))
-
-;; There is no x86 instruction for extracting the high bit of 16-bit lanes so
-;; here we:
-;; - duplicate the 16-bit lanes of `src` into 8-bit lanes:
-;;     PACKSSWB([x1, x2, ...], [x1, x2, ...]) = [x1', x2', ..., x1', x2', ...]
-;; - use PMOVMSKB to gather the high bits; now we have duplicates, though
-;; - shift away the bottom 8 high bits to remove the duplicates.
-(rule (lower (vhigh_bits val @ (value_type (multi_lane 16 8))))
-      (let ((src Xmm val)
-            (tmp Xmm (x64_packsswb src src))
-            (tmp Gpr (x64_pmovmskb (OperandSize.Size32) tmp)))
-        (x64_shr $I64 tmp (Imm8Reg.Imm8 8))))
-
-;; Rules for `iconcat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (iconcat lo @ (value_type $I64) hi))
-      (value_regs lo hi))
-
-;; Rules for `isplit` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (isplit val @ (value_type $I128)))
-      (let ((regs ValueRegs val)
-            (lo Reg (value_regs_get regs 0))
-            (hi Reg (value_regs_get regs 1)))
-        (output_pair lo hi)))
-
-;; Rules for `tls_value` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (has_type (tls_model (TlsModel.ElfGd)) (tls_value (symbol_value_data name _ _))))
-      (elf_tls_get_addr name))
-
-(rule (lower (has_type (tls_model (TlsModel.Macho)) (tls_value (symbol_value_data name _ _))))
-      (macho_tls_get_addr name))
-
-(rule (lower (has_type (tls_model (TlsModel.Coff)) (tls_value (symbol_value_data name _ _))))
-      (coff_tls_get_addr name))
-
-;; Rules for `sqmul_round_sat` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule 1 (lower (sqmul_round_sat qx @ (value_type $I16X8) qy))
-        (if-let $true (use_ssse3))
-        (let ((src1 Xmm qx)
-              (src2 Xmm qy)
-
-              (mask XmmMem (emit_u128_le_const 0x8000_8000_8000_8000_8000_8000_8000_8000))
-              (dst Xmm (x64_pmulhrsw src1 src2))
-              (cmp Xmm (x64_pcmpeqw dst mask)))
-          (x64_pxor dst cmp)))
-
-;; This operation is defined in wasm as:
-;;
-;;    S.SignedSaturate((x * y + 0x4000) >> 15)
-;;
-;; so perform all those operations here manually with a lack of the native
-;; instruction.
-(rule (lower (sqmul_round_sat qx @ (value_type $I16X8) qy))
-      (let (
-          (qx Xmm qx)
-          (qy Xmm qy)
-          ;; Multiply `qx` and `qy` generating 32-bit intermediate results. The
-          ;; 32-bit results have their low-halves stored in `mul_lsb` and the
-          ;; high halves are stored in `mul_msb`. These are then shuffled into
-          ;; `mul_lo` and `mul_hi` which represent the low 4 multiplications
-          ;; and the upper 4 multiplications.
-          (mul_lsb Xmm (x64_pmullw qx qy))
-          (mul_msb Xmm (x64_pmulhw qx qy))
-          (mul_lo Xmm (x64_punpcklwd mul_lsb mul_msb))
-          (mul_hi Xmm (x64_punpckhwd mul_lsb mul_msb))
-          ;; Add the 0x4000 constant to all multiplications
-          (val Xmm (x64_movdqu_load (emit_u128_le_const 0x00004000_00004000_00004000_00004000)))
-          (mul_lo Xmm (x64_paddd mul_lo val))
-          (mul_hi Xmm (x64_paddd mul_hi val))
-          ;; Perform the right-shift by 15 to all multiplications
-          (lo Xmm (x64_psrad mul_lo (xmi_imm 15)))
-          (hi Xmm (x64_psrad mul_hi (xmi_imm 15)))
-        )
-        ;; And finally perform a saturating 32-to-16-bit conversion.
-        (x64_packssdw lo hi)))
-
-;; Rules for `x86_pmulhrsw` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (x86_pmulhrsw qx @ (value_type $I16X8) qy))
-      (if-let $true (use_ssse3))
-      (x64_pmulhrsw qx qy))
-
-;; Rules for `uunarrow` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;; TODO: currently we only lower a special case of `uunarrow` needed to support
-;; the translation of wasm's i32x4.trunc_sat_f64x2_u_zero operation.
-;; https://github.com/bytecodealliance/wasmtime/issues/4791
-;;
-;; y = i32x4.trunc_sat_f64x2_u_zero(x) is lowered to:
-;; MOVAPD xmm_y, xmm_x
-;; XORPD xmm_tmp, xmm_tmp
-;; MAXPD xmm_y, xmm_tmp
-;; MINPD xmm_y, [wasm_f64x2_splat(4294967295.0)]
-;; ROUNDPD xmm_y, xmm_y, 0x0B
-;; ADDPD xmm_y, [wasm_f64x2_splat(0x1.0p+52)]
-;; SHUFPS xmm_y, xmm_xmp, 0x88
-(rule (lower (uunarrow (fcvt_to_uint_sat src @ (value_type $F64X2))
-                       (vconst (u128_from_constant 0))))
-      (let ((src Xmm src)
-
-            ;; MOVAPD xmm_y, xmm_x
-            ;; XORPD xmm_tmp, xmm_tmp
-            (zeros Xmm (xmm_zero $F64X2))
-            (dst Xmm (x64_maxpd src zeros))
-
-            ;; 4294967295.0 is equivalent to 0x41EFFFFFFFE00000
-            (umax_mask XmmMem (emit_u128_le_const 0x41EFFFFFFFE00000_41EFFFFFFFE00000))
-
-            ;; MINPD xmm_y, [wasm_f64x2_splat(4294967295.0)]
-            (dst Xmm (x64_minpd dst umax_mask))
-
-            ;; ROUNDPD xmm_y, xmm_y, 0x0B
-            (dst Xmm (x64_round $F64X2 dst (RoundImm.RoundZero)))
-
-            ;; ADDPD xmm_y, [wasm_f64x2_splat(0x1.0p+52)]
-            (uint_mask XmmMem (emit_u128_le_const 0x4330000000000000_4330000000000000))
-
-            (dst Xmm (x64_addpd dst uint_mask)))
-
-        ;; SHUFPS xmm_y, xmm_xmp, 0x88
-        (x64_shufps dst zeros 0x88)))
-
-;; Rules for `nop` ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(rule (lower (nop))
-      (invalid_reg))