wasmtime 24.0.0 → 25.0.0

data/ext/cargo-vendor/cranelift-codegen-meta-0.111.0/src/shared/instructions.rs

@@ -1,3794 +0,0 @@
-#![allow(non_snake_case)]
-
-use crate::cdsl::instructions::{
-    AllInstructions, InstructionBuilder as Inst, InstructionGroupBuilder,
-};
-use crate::cdsl::operands::Operand;
-use crate::cdsl::types::{LaneType, ValueType};
-use crate::cdsl::typevar::{Interval, TypeSetBuilder, TypeVar};
-use crate::shared::formats::Formats;
-use crate::shared::types;
-use crate::shared::{entities::EntityRefs, immediates::Immediates};
-
-#[inline(never)]
-fn define_control_flow(
-    ig: &mut InstructionGroupBuilder,
-    formats: &Formats,
-    imm: &Immediates,
-    entities: &EntityRefs,
-) {
-    ig.push(
-        Inst::new(
-            "jump",
-            r#"
-        Jump.
-
-        Unconditionally jump to a basic block, passing the specified
-        block arguments. The number and types of arguments must match the
-        destination block.
-        "#,
-            &formats.jump,
-        )
-        .operands_in(vec![Operand::new("block_call", &entities.block_call)
-            .with_doc("Destination basic block, with its arguments provided")])
-        .branches(),
-    );
-
-    let ScalarTruthy = &TypeVar::new(
-        "ScalarTruthy",
-        "A scalar truthy type",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "brif",
-            r#"
-        Conditional branch when cond is non-zero.
-
-        Take the ``then`` branch when ``c != 0``, and the ``else`` branch otherwise.
-        "#,
-            &formats.brif,
-        )
-        .operands_in(vec![
-            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
-            Operand::new("block_then", &entities.block_then).with_doc("Then block"),
-            Operand::new("block_else", &entities.block_else).with_doc("Else block"),
-        ])
-        .branches(),
-    );
-
-    {
-        let _i32 = &TypeVar::new(
-            "i32",
-            "A 32 bit scalar integer type",
-            TypeSetBuilder::new().ints(32..32).build(),
-        );
-
-        ig.push(
-            Inst::new(
-                "br_table",
-                r#"
-        Indirect branch via jump table.
-
-        Use ``x`` as an unsigned index into the jump table ``JT``. If a jump
-        table entry is found, branch to the corresponding block. If no entry was
-        found or the index is out-of-bounds, branch to the default block of the
-        table.
-
-        Note that this branch instruction can't pass arguments to the targeted
-        blocks. Split critical edges as needed to work around this.
-
-        Do not confuse this with "tables" in WebAssembly. ``br_table`` is for
-        jump tables with destinations within the current function only -- think
-        of a ``match`` in Rust or a ``switch`` in C.  If you want to call a
-        function in a dynamic library, that will typically use
-        ``call_indirect``.
-        "#,
-                &formats.branch_table,
-            )
-            .operands_in(vec![
-                Operand::new("x", _i32).with_doc("i32 index into jump table"),
-                Operand::new("JT", &entities.jump_table),
-            ])
-            .branches(),
-        );
-    }
-
-    let iAddr = &TypeVar::new(
-        "iAddr",
-        "An integer address type",
-        TypeSetBuilder::new().ints(32..64).refs(32..64).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "debugtrap",
-            r#"
-        Encodes an assembly debug trap.
-        "#,
-            &formats.nullary,
-        )
-        .other_side_effects()
-        .can_load()
-        .can_store(),
-    );
-
-    ig.push(
-        Inst::new(
-            "trap",
-            r#"
-        Terminate execution unconditionally.
-        "#,
-            &formats.trap,
-        )
-        .operands_in(vec![Operand::new("code", &imm.trapcode)])
-        .can_trap()
-        .terminates_block(),
-    );
-
-    ig.push(
-        Inst::new(
-            "trapz",
-            r#"
-        Trap when zero.
-
-        if ``c`` is non-zero, execution continues at the following instruction.
-        "#,
-            &formats.cond_trap,
-        )
-        .operands_in(vec![
-            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
-            Operand::new("code", &imm.trapcode),
-        ])
-        .can_trap(),
-    );
-
-    ig.push(
-        Inst::new(
-            "trapnz",
-            r#"
-        Trap when non-zero.
-
-        If ``c`` is zero, execution continues at the following instruction.
-        "#,
-            &formats.cond_trap,
-        )
-        .operands_in(vec![
-            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
-            Operand::new("code", &imm.trapcode),
-        ])
-        .can_trap(),
-    );
-
-    ig.push(
-        Inst::new(
-            "return",
-            r#"
-        Return from the function.
-
-        Unconditionally transfer control to the calling function, passing the
-        provided return values. The list of return values must match the
-        function signature's return types.
-        "#,
-            &formats.multiary,
-        )
-        .operands_in(vec![
-            Operand::new("rvals", &entities.varargs).with_doc("return values")
-        ])
-        .returns(),
-    );
-
-    ig.push(
-        Inst::new(
-            "call",
-            r#"
-        Direct function call.
-
-        Call a function which has been declared in the preamble. The argument
-        types must match the function's signature.
-        "#,
-            &formats.call,
-        )
-        .operands_in(vec![
-            Operand::new("FN", &entities.func_ref)
-                .with_doc("function to call, declared by `function`"),
-            Operand::new("args", &entities.varargs).with_doc("call arguments"),
-        ])
-        .operands_out(vec![
-            Operand::new("rvals", &entities.varargs).with_doc("return values")
-        ])
-        .call(),
-    );
-
-    ig.push(
-        Inst::new(
-            "call_indirect",
-            r#"
-        Indirect function call.
-
-        Call the function pointed to by `callee` with the given arguments. The
-        called function must match the specified signature.
-
-        Note that this is different from WebAssembly's ``call_indirect``; the
-        callee is a native address, rather than a table index. For WebAssembly,
-        `table_addr` and `load` are used to obtain a native address
-        from a table.
-        "#,
-            &formats.call_indirect,
-        )
-        .operands_in(vec![
-            Operand::new("SIG", &entities.sig_ref).with_doc("function signature"),
-            Operand::new("callee", iAddr).with_doc("address of function to call"),
-            Operand::new("args", &entities.varargs).with_doc("call arguments"),
-        ])
-        .operands_out(vec![
-            Operand::new("rvals", &entities.varargs).with_doc("return values")
-        ])
-        .call(),
-    );
-
-    ig.push(
-        Inst::new(
-            "return_call",
-            r#"
-        Direct tail call.
-
-        Tail call a function which has been declared in the preamble. The
-        argument types must match the function's signature, the caller and
-        callee calling conventions must be the same, and must be a calling
-        convention that supports tail calls.
-
-        This instruction is a block terminator.
-        "#,
-            &formats.call,
-        )
-        .operands_in(vec![
-            Operand::new("FN", &entities.func_ref)
-                .with_doc("function to call, declared by `function`"),
-            Operand::new("args", &entities.varargs).with_doc("call arguments"),
-        ])
-        .returns()
-        .call(),
-    );
-
-    ig.push(
-        Inst::new(
-            "return_call_indirect",
-            r#"
-        Indirect tail call.
-
-        Call the function pointed to by `callee` with the given arguments. The
-        argument types must match the function's signature, the caller and
-        callee calling conventions must be the same, and must be a calling
-        convention that supports tail calls.
-
-        This instruction is a block terminator.
-
-        Note that this is different from WebAssembly's ``tail_call_indirect``;
-        the callee is a native address, rather than a table index. For
-        WebAssembly, `table_addr` and `load` are used to obtain a native address
-        from a table.
-        "#,
-            &formats.call_indirect,
-        )
-        .operands_in(vec![
-            Operand::new("SIG", &entities.sig_ref).with_doc("function signature"),
-            Operand::new("callee", iAddr).with_doc("address of function to call"),
-            Operand::new("args", &entities.varargs).with_doc("call arguments"),
-        ])
-        .returns()
-        .call(),
-    );
-
-    ig.push(
-        Inst::new(
-            "func_addr",
-            r#"
-        Get the address of a function.
-
-        Compute the absolute address of a function declared in the preamble.
-        The returned address can be used as a ``callee`` argument to
-        `call_indirect`. This is also a method for calling functions that
-        are too far away to be addressable by a direct `call`
-        instruction.
-        "#,
-            &formats.func_addr,
-        )
-        .operands_in(vec![Operand::new("FN", &entities.func_ref)
-            .with_doc("function to call, declared by `function`")])
-        .operands_out(vec![Operand::new("addr", iAddr)]),
-    );
-}
-
-#[inline(never)]
-fn define_simd_lane_access(
-    ig: &mut InstructionGroupBuilder,
-    formats: &Formats,
-    imm: &Immediates,
-    _: &EntityRefs,
-) {
-    let TxN = &TypeVar::new(
-        "TxN",
-        "A SIMD vector type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .floats(Interval::All)
-            .simd_lanes(Interval::All)
-            .dynamic_simd_lanes(Interval::All)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "splat",
-            r#"
-        Vector splat.
-
-        Return a vector whose lanes are all ``x``.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![
-            Operand::new("x", &TxN.lane_of()).with_doc("Value to splat to all lanes")
-        ])
-        .operands_out(vec![Operand::new("a", TxN)]),
-    );
-
-    let I8x16 = &TypeVar::new(
-        "I8x16",
-        "A SIMD vector type consisting of 16 lanes of 8-bit integers",
-        TypeSetBuilder::new()
-            .ints(8..8)
-            .simd_lanes(16..16)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "swizzle",
-            r#"
-        Vector swizzle.
-
-        Returns a new vector with byte-width lanes selected from the lanes of the first input
-        vector ``x`` specified in the second input vector ``s``. The indices ``i`` in range
-        ``[0, 15]`` select the ``i``-th element of ``x``. For indices outside of the range the
-        resulting lane is 0. Note that this operates on byte-width lanes.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", I8x16).with_doc("Vector to modify by re-arranging lanes"),
-            Operand::new("y", I8x16).with_doc("Mask for re-arranging lanes"),
-        ])
-        .operands_out(vec![Operand::new("a", I8x16)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "x86_pshufb",
-            r#"
-        A vector swizzle lookalike which has the semantics of `pshufb` on x64.
-
-        This instruction will permute the 8-bit lanes of `x` with the indices
-        specified in `y`. Each lane in the mask, `y`, uses the bottom four
-        bits for selecting the lane from `x` unless the most significant bit
-        is set, in which case the lane is zeroed. The output vector will have
-        the following contents when the element of `y` is in these ranges:
-
-        * `[0, 127]` -> `x[y[i] % 16]`
-        * `[128, 255]` -> 0
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", I8x16).with_doc("Vector to modify by re-arranging lanes"),
-            Operand::new("y", I8x16).with_doc("Mask for re-arranging lanes"),
-        ])
-        .operands_out(vec![Operand::new("a", I8x16)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "insertlane",
-            r#"
-        Insert ``y`` as lane ``Idx`` in x.
-
-        The lane index, ``Idx``, is an immediate value, not an SSA value. It
-        must indicate a valid lane index for the type of ``x``.
-        "#,
-            &formats.ternary_imm8,
-        )
-        .operands_in(vec![
-            Operand::new("x", TxN).with_doc("The vector to modify"),
-            Operand::new("y", &TxN.lane_of()).with_doc("New lane value"),
-            Operand::new("Idx", &imm.uimm8).with_doc("Lane index"),
-        ])
-        .operands_out(vec![Operand::new("a", TxN)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "extractlane",
-            r#"
-        Extract lane ``Idx`` from ``x``.
-
-        The lane index, ``Idx``, is an immediate value, not an SSA value. It
-        must indicate a valid lane index for the type of ``x``. Note that the upper bits of ``a``
-        may or may not be zeroed depending on the ISA but the type system should prevent using
-        ``a`` as anything other than the extracted value.
-        "#,
-            &formats.binary_imm8,
-        )
-        .operands_in(vec![
-            Operand::new("x", TxN),
-            Operand::new("Idx", &imm.uimm8).with_doc("Lane index"),
-        ])
-        .operands_out(vec![Operand::new("a", &TxN.lane_of())]),
-    );
-}
-
-#[inline(never)]
-fn define_simd_arithmetic(
-    ig: &mut InstructionGroupBuilder,
-    formats: &Formats,
-    _: &Immediates,
-    _: &EntityRefs,
-) {
-    let Int = &TypeVar::new(
-        "Int",
-        "A scalar or vector integer type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .simd_lanes(Interval::All)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "smin",
-            r#"
-        Signed integer minimum.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "umin",
-            r#"
-        Unsigned integer minimum.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "smax",
-            r#"
-        Signed integer maximum.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "umax",
-            r#"
-        Unsigned integer maximum.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    let IxN = &TypeVar::new(
-        "IxN",
-        "A SIMD vector type containing integers",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .simd_lanes(Interval::All)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "avg_round",
-            r#"
-        Unsigned average with rounding: `a := (x + y + 1) // 2`
-
-        The addition does not lose any information (such as from overflow).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
-        .operands_out(vec![Operand::new("a", IxN)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "uadd_sat",
-            r#"
-        Add with unsigned saturation.
-
-        This is similar to `iadd` but the operands are interpreted as unsigned integers and their
-        summed result, instead of wrapping, will be saturated to the highest unsigned integer for
-        the controlling type (e.g. `0xFF` for i8).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
-        .operands_out(vec![Operand::new("a", IxN)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "sadd_sat",
-            r#"
-        Add with signed saturation.
-
-        This is similar to `iadd` but the operands are interpreted as signed integers and their
-        summed result, instead of wrapping, will be saturated to the lowest or highest
-        signed integer for the controlling type (e.g. `0x80` or `0x7F` for i8). For example,
-        since an `sadd_sat.i8` of `0x70` and `0x70` is greater than `0x7F`, the result will be
-        clamped to `0x7F`.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
-        .operands_out(vec![Operand::new("a", IxN)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "usub_sat",
-            r#"
-        Subtract with unsigned saturation.
-
-        This is similar to `isub` but the operands are interpreted as unsigned integers and their
-        difference, instead of wrapping, will be saturated to the lowest unsigned integer for
-        the controlling type (e.g. `0x00` for i8).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
-        .operands_out(vec![Operand::new("a", IxN)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ssub_sat",
-            r#"
-        Subtract with signed saturation.
-
-        This is similar to `isub` but the operands are interpreted as signed integers and their
-        difference, instead of wrapping, will be saturated to the lowest or highest
-        signed integer for the controlling type (e.g. `0x80` or `0x7F` for i8).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", IxN), Operand::new("y", IxN)])
-        .operands_out(vec![Operand::new("a", IxN)]),
-    );
-}
-
-pub(crate) fn define(
-    all_instructions: &mut AllInstructions,
-    formats: &Formats,
-    imm: &Immediates,
-    entities: &EntityRefs,
-) {
-    let mut ig = InstructionGroupBuilder::new(all_instructions);
-
-    define_control_flow(&mut ig, formats, imm, entities);
-    define_simd_lane_access(&mut ig, formats, imm, entities);
-    define_simd_arithmetic(&mut ig, formats, imm, entities);
-
-    // Operand kind shorthands.
-    let i8: &TypeVar = &ValueType::from(LaneType::from(types::Int::I8)).into();
-    let f16_: &TypeVar = &ValueType::from(LaneType::from(types::Float::F16)).into();
-    let f32_: &TypeVar = &ValueType::from(LaneType::from(types::Float::F32)).into();
-    let f64_: &TypeVar = &ValueType::from(LaneType::from(types::Float::F64)).into();
-    let f128_: &TypeVar = &ValueType::from(LaneType::from(types::Float::F128)).into();
-
-    // Starting definitions.
-    let Int = &TypeVar::new(
-        "Int",
-        "A scalar or vector integer type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .simd_lanes(Interval::All)
-            .dynamic_simd_lanes(Interval::All)
-            .build(),
-    );
-
-    let NarrowInt = &TypeVar::new(
-        "NarrowInt",
-        "An integer type of width up to `i64`",
-        TypeSetBuilder::new().ints(8..64).build(),
-    );
-
-    let ScalarTruthy = &TypeVar::new(
-        "ScalarTruthy",
-        "A scalar truthy type",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-
-    let iB = &TypeVar::new(
-        "iB",
-        "A scalar integer type",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-
-    let iSwappable = &TypeVar::new(
-        "iSwappable",
-        "A multi byte scalar integer type",
-        TypeSetBuilder::new().ints(16..128).build(),
-    );
-
-    let iAddr = &TypeVar::new(
-        "iAddr",
-        "An integer address type",
-        TypeSetBuilder::new().ints(32..64).refs(32..64).build(),
-    );
-
-    let Ref = &TypeVar::new(
-        "Ref",
-        "A scalar reference type",
-        TypeSetBuilder::new().refs(Interval::All).build(),
-    );
-
-    let TxN = &TypeVar::new(
-        "TxN",
-        "A SIMD vector type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .floats(Interval::All)
-            .simd_lanes(Interval::All)
-            .includes_scalars(false)
-            .build(),
-    );
-    let Any = &TypeVar::new(
-        "Any",
-        "Any integer, float, or reference scalar or vector type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .floats(Interval::All)
-            .refs(Interval::All)
-            .simd_lanes(Interval::All)
-            .includes_scalars(true)
-            .build(),
-    );
-
-    let Mem = &TypeVar::new(
-        "Mem",
-        "Any type that can be stored in memory",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .floats(Interval::All)
-            .simd_lanes(Interval::All)
-            .refs(Interval::All)
-            .dynamic_simd_lanes(Interval::All)
-            .build(),
-    );
-
-    let MemTo = &TypeVar::copy_from(Mem, "MemTo".to_string());
-
-    ig.push(
-        Inst::new(
-            "load",
-            r#"
-        Load from memory at ``p + Offset``.
-
-        This is a polymorphic instruction that can load any value type which
-        has a memory representation.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "store",
-            r#"
-        Store ``x`` to memory at ``p + Offset``.
-
-        This is a polymorphic instruction that can store any value type with a
-        memory representation.
-        "#,
-            &formats.store,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("x", Mem).with_doc("Value to be stored"),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .can_store(),
-    );
-
-    let iExt8 = &TypeVar::new(
-        "iExt8",
-        "An integer type with more than 8 bits",
-        TypeSetBuilder::new().ints(16..64).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uload8",
-            r#"
-        Load 8 bits from memory at ``p + Offset`` and zero-extend.
-
-        This is equivalent to ``load.i8`` followed by ``uextend``.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", iExt8)])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sload8",
-            r#"
-        Load 8 bits from memory at ``p + Offset`` and sign-extend.
-
-        This is equivalent to ``load.i8`` followed by ``sextend``.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", iExt8)])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "istore8",
-            r#"
-        Store the low 8 bits of ``x`` to memory at ``p + Offset``.
-
-        This is equivalent to ``ireduce.i8`` followed by ``store.i8``.
-        "#,
-            &formats.store,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("x", iExt8),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .can_store(),
-    );
-
-    let iExt16 = &TypeVar::new(
-        "iExt16",
-        "An integer type with more than 16 bits",
-        TypeSetBuilder::new().ints(32..64).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uload16",
-            r#"
-        Load 16 bits from memory at ``p + Offset`` and zero-extend.
-
-        This is equivalent to ``load.i16`` followed by ``uextend``.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", iExt16)])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sload16",
-            r#"
-        Load 16 bits from memory at ``p + Offset`` and sign-extend.
-
-        This is equivalent to ``load.i16`` followed by ``sextend``.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", iExt16)])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "istore16",
-            r#"
-        Store the low 16 bits of ``x`` to memory at ``p + Offset``.
-
-        This is equivalent to ``ireduce.i16`` followed by ``store.i16``.
-        "#,
-            &formats.store,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("x", iExt16),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .can_store(),
-    );
-
-    let iExt32 = &TypeVar::new(
-        "iExt32",
-        "An integer type with more than 32 bits",
-        TypeSetBuilder::new().ints(64..64).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uload32",
-            r#"
-        Load 32 bits from memory at ``p + Offset`` and zero-extend.
-
-        This is equivalent to ``load.i32`` followed by ``uextend``.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", iExt32)])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sload32",
-            r#"
-        Load 32 bits from memory at ``p + Offset`` and sign-extend.
-
-        This is equivalent to ``load.i32`` followed by ``sextend``.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", iExt32)])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "istore32",
-            r#"
-        Store the low 32 bits of ``x`` to memory at ``p + Offset``.
-
-        This is equivalent to ``ireduce.i32`` followed by ``store.i32``.
-        "#,
-            &formats.store,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("x", iExt32),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .can_store(),
-    );
-
-    let I16x8 = &TypeVar::new(
-        "I16x8",
-        "A SIMD vector with exactly 8 lanes of 16-bit values",
-        TypeSetBuilder::new()
-            .ints(16..16)
-            .simd_lanes(8..8)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uload8x8",
-            r#"
-        Load an 8x8 vector (64 bits) from memory at ``p + Offset`` and zero-extend into an i16x8
-        vector.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", I16x8).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sload8x8",
-            r#"
-        Load an 8x8 vector (64 bits) from memory at ``p + Offset`` and sign-extend into an i16x8
-        vector.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", I16x8).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    let I32x4 = &TypeVar::new(
-        "I32x4",
-        "A SIMD vector with exactly 4 lanes of 32-bit values",
-        TypeSetBuilder::new()
-            .ints(32..32)
-            .simd_lanes(4..4)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uload16x4",
-            r#"
-        Load a 16x4 vector (64 bits) from memory at ``p + Offset`` and zero-extend into an i32x4
-        vector.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", I32x4).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sload16x4",
-            r#"
-        Load a 16x4 vector (64 bits) from memory at ``p + Offset`` and sign-extend into an i32x4
-        vector.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", I32x4).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    let I64x2 = &TypeVar::new(
-        "I64x2",
-        "A SIMD vector with exactly 2 lanes of 64-bit values",
-        TypeSetBuilder::new()
-            .ints(64..64)
-            .simd_lanes(2..2)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uload32x2",
-            r#"
-        Load an 32x2 vector (64 bits) from memory at ``p + Offset`` and zero-extend into an i64x2
-        vector.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", I64x2).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sload32x2",
-            r#"
-        Load a 32x2 vector (64 bits) from memory at ``p + Offset`` and sign-extend into an i64x2
-        vector.
-        "#,
-            &formats.load,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("Offset", &imm.offset32).with_doc("Byte offset from base address"),
-        ])
-        .operands_out(vec![Operand::new("a", I64x2).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "stack_load",
-            r#"
-        Load a value from a stack slot at the constant offset.
-
-        This is a polymorphic instruction that can load any value type which
-        has a memory representation.
-
-        The offset is an immediate constant, not an SSA value. The memory
-        access cannot go out of bounds, i.e.
-        `sizeof(a) + Offset <= sizeof(SS)`.
-        "#,
-            &formats.stack_load,
-        )
-        .operands_in(vec![
-            Operand::new("SS", &entities.stack_slot),
-            Operand::new("Offset", &imm.offset32).with_doc("In-bounds offset into stack slot"),
-        ])
-        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "stack_store",
-            r#"
-        Store a value to a stack slot at a constant offset.
-
-        This is a polymorphic instruction that can store any value type with a
-        memory representation.
-
-        The offset is an immediate constant, not an SSA value. The memory
-        access cannot go out of bounds, i.e.
-        `sizeof(a) + Offset <= sizeof(SS)`.
-        "#,
-            &formats.stack_store,
-        )
-        .operands_in(vec![
-            Operand::new("x", Mem).with_doc("Value to be stored"),
-            Operand::new("SS", &entities.stack_slot),
-            Operand::new("Offset", &imm.offset32).with_doc("In-bounds offset into stack slot"),
-        ])
-        .can_store(),
-    );
-
-    ig.push(
-        Inst::new(
-            "stack_addr",
-            r#"
-        Get the address of a stack slot.
-
-        Compute the absolute address of a byte in a stack slot. The offset must
-        refer to a byte inside the stack slot:
-        `0 <= Offset < sizeof(SS)`.
-        "#,
-            &formats.stack_load,
-        )
-        .operands_in(vec![
-            Operand::new("SS", &entities.stack_slot),
-            Operand::new("Offset", &imm.offset32).with_doc("In-bounds offset into stack slot"),
-        ])
-        .operands_out(vec![Operand::new("addr", iAddr)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "dynamic_stack_load",
-            r#"
-        Load a value from a dynamic stack slot.
-
-        This is a polymorphic instruction that can load any value type which
-        has a memory representation.
-        "#,
-            &formats.dynamic_stack_load,
-        )
-        .operands_in(vec![Operand::new("DSS", &entities.dynamic_stack_slot)])
-        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")])
-        .can_load(),
-    );
-
-    ig.push(
-        Inst::new(
-            "dynamic_stack_store",
-            r#"
-        Store a value to a dynamic stack slot.
-
-        This is a polymorphic instruction that can store any dynamic value type with a
-        memory representation.
-        "#,
-            &formats.dynamic_stack_store,
-        )
-        .operands_in(vec![
-            Operand::new("x", Mem).with_doc("Value to be stored"),
-            Operand::new("DSS", &entities.dynamic_stack_slot),
-        ])
-        .can_store(),
-    );
-
-    ig.push(
-        Inst::new(
-            "dynamic_stack_addr",
-            r#"
-        Get the address of a dynamic stack slot.
-
-        Compute the absolute address of the first byte of a dynamic stack slot.
-        "#,
-            &formats.dynamic_stack_load,
-        )
-        .operands_in(vec![Operand::new("DSS", &entities.dynamic_stack_slot)])
-        .operands_out(vec![Operand::new("addr", iAddr)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "global_value",
-            r#"
-        Compute the value of global GV.
-        "#,
-            &formats.unary_global_value,
-        )
-        .operands_in(vec![Operand::new("GV", &entities.global_value)])
-        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")]),
-    );
-
-    ig.push(
-        Inst::new(
-            "symbol_value",
-            r#"
-        Compute the value of global GV, which is a symbolic value.
-        "#,
-            &formats.unary_global_value,
-        )
-        .operands_in(vec![Operand::new("GV", &entities.global_value)])
-        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")]),
-    );
-
-    ig.push(
-        Inst::new(
-            "tls_value",
-            r#"
-        Compute the value of global GV, which is a TLS (thread local storage) value.
-        "#,
-            &formats.unary_global_value,
-        )
-        .operands_in(vec![Operand::new("GV", &entities.global_value)])
-        .operands_out(vec![Operand::new("a", Mem).with_doc("Value loaded")]),
-    );
-
-    // Note this instruction is marked as having other side-effects, so GVN won't try to hoist it,
-    // which would result in it being subject to spilling. While not hoisting would generally hurt
-    // performance, since a computed value used many times may need to be regenerated before each
-    // use, it is not the case here: this instruction doesn't generate any code.  That's because,
-    // by definition the pinned register is never used by the register allocator, but is written to
-    // and read explicitly and exclusively by set_pinned_reg and get_pinned_reg.
-    ig.push(
-        Inst::new(
-            "get_pinned_reg",
-            r#"
-            Gets the content of the pinned register, when it's enabled.
-        "#,
-            &formats.nullary,
-        )
-        .operands_out(vec![Operand::new("addr", iAddr)])
-        .other_side_effects(),
-    );
-
-    ig.push(
-        Inst::new(
-            "set_pinned_reg",
-            r#"
-        Sets the content of the pinned register, when it's enabled.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("addr", iAddr)])
-        .other_side_effects(),
-    );
-
-    ig.push(
-        Inst::new(
-            "get_frame_pointer",
-            r#"
-        Get the address in the frame pointer register.
-
-        Usage of this instruction requires setting `preserve_frame_pointers` to `true`.
-        "#,
-            &formats.nullary,
-        )
-        .operands_out(vec![Operand::new("addr", iAddr)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "get_stack_pointer",
-            r#"
-        Get the address in the stack pointer register.
-        "#,
-            &formats.nullary,
-        )
-        .operands_out(vec![Operand::new("addr", iAddr)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "get_return_address",
-            r#"
-        Get the PC where this function will transfer control to when it returns.
-
-        Usage of this instruction requires setting `preserve_frame_pointers` to `true`.
-        "#,
-            &formats.nullary,
-        )
-        .operands_out(vec![Operand::new("addr", iAddr)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iconst",
-            r#"
-        Integer constant.
-
-        Create a scalar integer SSA value with an immediate constant value, or
-        an integer vector where all the lanes have the same value.
-        "#,
-            &formats.unary_imm,
-        )
-        .operands_in(vec![Operand::new("N", &imm.imm64)])
-        .operands_out(vec![
-            Operand::new("a", NarrowInt).with_doc("A constant integer scalar or vector value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "f16const",
-            r#"
-        Floating point constant.
-
-        Create a `f16` SSA value with an immediate constant value.
-        "#,
-            &formats.unary_ieee16,
-        )
-        .operands_in(vec![Operand::new("N", &imm.ieee16)])
-        .operands_out(vec![
-            Operand::new("a", f16_).with_doc("A constant f16 scalar value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "f32const",
-            r#"
-        Floating point constant.
-
-        Create a `f32` SSA value with an immediate constant value.
-        "#,
-            &formats.unary_ieee32,
-        )
-        .operands_in(vec![Operand::new("N", &imm.ieee32)])
-        .operands_out(vec![
-            Operand::new("a", f32_).with_doc("A constant f32 scalar value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "f64const",
-            r#"
-        Floating point constant.
-
-        Create a `f64` SSA value with an immediate constant value.
-        "#,
-            &formats.unary_ieee64,
-        )
-        .operands_in(vec![Operand::new("N", &imm.ieee64)])
-        .operands_out(vec![
-            Operand::new("a", f64_).with_doc("A constant f64 scalar value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "f128const",
-            r#"
-        Floating point constant.
-
-        Create a `f128` SSA value with an immediate constant value.
-        "#,
-            &formats.unary_const,
-        )
-        .operands_in(vec![Operand::new("N", &imm.pool_constant)])
-        .operands_out(vec![
-            Operand::new("a", f128_).with_doc("A constant f128 scalar value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "vconst",
-            r#"
-        SIMD vector constant.
-
-        Construct a vector with the given immediate bytes.
-        "#,
-            &formats.unary_const,
-        )
-        .operands_in(vec![Operand::new("N", &imm.pool_constant)
-            .with_doc("The 16 immediate bytes of a 128-bit vector")])
-        .operands_out(vec![
-            Operand::new("a", TxN).with_doc("A constant vector value")
-        ]),
-    );
-
-    let Tx16 = &TypeVar::new(
-        "Tx16",
-        "A SIMD vector with exactly 16 lanes of 8-bit values; eventually this may support other \
-         lane counts and widths",
-        TypeSetBuilder::new()
-            .ints(8..8)
-            .simd_lanes(16..16)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "shuffle",
-            r#"
-        SIMD vector shuffle.
-
-        Shuffle two vectors using the given immediate bytes. For each of the 16 bytes of the
-        immediate, a value i of 0-15 selects the i-th element of the first vector and a value i of
-        16-31 selects the (i-16)th element of the second vector. Immediate values outside of the
-        0-31 range are not valid.
-        "#,
-            &formats.shuffle,
-        )
-        .operands_in(vec![
-            Operand::new("a", Tx16).with_doc("A vector value"),
-            Operand::new("b", Tx16).with_doc("A vector value"),
-            Operand::new("mask", &imm.uimm128)
-                .with_doc("The 16 immediate bytes used for selecting the elements to shuffle"),
-        ])
-        .operands_out(vec![Operand::new("a", Tx16).with_doc("A vector value")]),
-    );
-
-    ig.push(
-        Inst::new(
-            "null",
-            r#"
-        Null constant value for reference types.
-
-        Create a scalar reference SSA value with a constant null value.
-        "#,
-            &formats.nullary,
-        )
-        .operands_out(vec![
-            Operand::new("a", Ref).with_doc("A constant reference null value")
-        ]),
-    );
-
-    ig.push(Inst::new(
-        "nop",
-        r#"
-        Just a dummy instruction.
-
-        Note: this doesn't compile to a machine code nop.
-        "#,
-        &formats.nullary,
-    ));
-
-    ig.push(
-        Inst::new(
-            "select",
-            r#"
-        Conditional select.
-
-        This instruction selects whole values. Use `bitselect` to choose each
-        bit according to a mask.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
-            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
-            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
-        ])
-        .operands_out(vec![Operand::new("a", Any)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "select_spectre_guard",
-            r#"
-            Conditional select intended for Spectre guards.
-
-            This operation is semantically equivalent to a select instruction.
-            However, this instruction prohibits all speculation on the
-            controlling value when determining which input to use as the result.
-            As such, it is suitable for use in Spectre guards.
-
-            For example, on a target which may speculatively execute branches,
-            the lowering of this instruction is guaranteed to not conditionally
-            branch. Instead it will typically lower to a conditional move
-            instruction. (No Spectre-vulnerable processors are known to perform
-            value speculation on conditional move instructions.)
-
-            Ensure that the instruction you're trying to protect from Spectre
-            attacks has a data dependency on the result of this instruction.
-            That prevents an out-of-order CPU from evaluating that instruction
-            until the result of this one is known, which in turn will be blocked
-            until the controlling value is known.
-
-            Typical usage is to use a bounds-check as the controlling value,
-            and select between either a null pointer if the bounds-check
-            fails, or an in-bounds address otherwise, so that dereferencing
-            the resulting address with a load or store instruction will trap if
-            the bounds-check failed. When this instruction is used in this way,
-            any microarchitectural side effects of the memory access will only
-            occur after the bounds-check finishes, which ensures that no Spectre
-            vulnerability will exist.
-
-            Optimization opportunities for this instruction are limited compared
-            to a normal select instruction, but it is allowed to be replaced
-            by other values which are functionally equivalent as long as doing
-            so does not introduce any new opportunities to speculate on the
-            controlling value.
-            "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("c", ScalarTruthy).with_doc("Controlling value to test"),
-            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
-            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
-        ])
-        .operands_out(vec![Operand::new("a", Any)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bitselect",
-            r#"
-        Conditional select of bits.
-
-        For each bit in `c`, this instruction selects the corresponding bit from `x` if the bit
-        in `x` is 1 and the corresponding bit from `y` if the bit in `c` is 0. See also:
-        `select`.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("c", Any).with_doc("Controlling value to test"),
-            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
-            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
-        ])
-        .operands_out(vec![Operand::new("a", Any)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "x86_blendv",
-            r#"
-        A bitselect-lookalike instruction except with the semantics of
-        `blendv`-related instructions on x86.
-
-        This instruction will use the top bit of each lane in `c`, the condition
-        mask. If the bit is 1 then the corresponding lane from `x` is chosen.
-        Otherwise the corresponding lane from `y` is chosen.
-
-            "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("c", Any).with_doc("Controlling value to test"),
-            Operand::new("x", Any).with_doc("Value to use when `c` is true"),
-            Operand::new("y", Any).with_doc("Value to use when `c` is false"),
-        ])
-        .operands_out(vec![Operand::new("a", Any)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "vany_true",
-            r#"
-        Reduce a vector to a scalar boolean.
-
-        Return a scalar boolean true if any lane in ``a`` is non-zero, false otherwise.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("a", TxN)])
-        .operands_out(vec![Operand::new("s", i8)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "vall_true",
-            r#"
-        Reduce a vector to a scalar boolean.
-
-        Return a scalar boolean true if all lanes in ``i`` are non-zero, false otherwise.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("a", TxN)])
-        .operands_out(vec![Operand::new("s", i8)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "vhigh_bits",
-            r#"
-        Reduce a vector to a scalar integer.
-
-        Return a scalar integer, consisting of the concatenation of the most significant bit
-        of each lane of ``a``.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("a", TxN)])
-        .operands_out(vec![Operand::new("x", NarrowInt)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "icmp",
-            r#"
-        Integer comparison.
-
-        The condition code determines if the operands are interpreted as signed
-        or unsigned integers.
-
-        | Signed | Unsigned | Condition             |
-        |--------|----------|-----------------------|
-        | eq     | eq       | Equal                 |
-        | ne     | ne       | Not equal             |
-        | slt    | ult      | Less than             |
-        | sge    | uge      | Greater than or equal |
-        | sgt    | ugt      | Greater than          |
-        | sle    | ule      | Less than or equal    |
-
-        When this instruction compares integer vectors, it returns a vector of
-        lane-wise comparisons.
-
-        When comparing scalars, the result is:
-            - `1` if the condition holds.
-            - `0` if the condition does not hold.
-
-        When comparing vectors, the result is:
-            - `-1` (i.e. all ones) in each lane where the condition holds.
-            - `0` in each lane where the condition does not hold.
-        "#,
-            &formats.int_compare,
-        )
-        .operands_in(vec![
-            Operand::new("Cond", &imm.intcc),
-            Operand::new("x", Int),
-            Operand::new("y", Int),
-        ])
-        .operands_out(vec![Operand::new("a", &Int.as_truthy())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "icmp_imm",
-            r#"
-        Compare scalar integer to a constant.
-
-        This is the same as the `icmp` instruction, except one operand is
-        a sign extended 64 bit immediate constant.
-
-        This instruction can only compare scalars. Use `icmp` for
-        lane-wise vector comparisons.
-        "#,
-            &formats.int_compare_imm,
-        )
-        .operands_in(vec![
-            Operand::new("Cond", &imm.intcc),
-            Operand::new("x", iB),
-            Operand::new("Y", &imm.imm64),
-        ])
-        .operands_out(vec![Operand::new("a", i8)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iadd",
-            r#"
-        Wrapping integer addition: `a := x + y \pmod{2^B}`.
-
-        This instruction does not depend on the signed/unsigned interpretation
-        of the operands.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "isub",
-            r#"
-        Wrapping integer subtraction: `a := x - y \pmod{2^B}`.
-
-        This instruction does not depend on the signed/unsigned interpretation
-        of the operands.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ineg",
-            r#"
-        Integer negation: `a := -x \pmod{2^B}`.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iabs",
-            r#"
-        Integer absolute value with wrapping: `a := |x|`.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "imul",
-            r#"
-        Wrapping integer multiplication: `a := x y \pmod{2^B}`.
-
-        This instruction does not depend on the signed/unsigned interpretation
-        of the operands.
-
-        Polymorphic over all integer types (vector and scalar).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "umulhi",
-            r#"
-        Unsigned integer multiplication, producing the high half of a
-        double-length result.
-
-        Polymorphic over all integer types (vector and scalar).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "smulhi",
-            r#"
-        Signed integer multiplication, producing the high half of a
-        double-length result.
-
-        Polymorphic over all integer types (vector and scalar).
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Int), Operand::new("y", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    let I16or32 = &TypeVar::new(
-        "I16or32",
-        "A vector integer type with 16- or 32-bit numbers",
-        TypeSetBuilder::new().ints(16..32).simd_lanes(4..8).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sqmul_round_sat",
-            r#"
-        Fixed-point multiplication of numbers in the QN format, where N + 1
-        is the number bitwidth:
-        `a := signed_saturate((x * y + 1 << (Q - 1)) >> Q)`
-
-        Polymorphic over all integer vector types with 16- or 32-bit numbers.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", I16or32), Operand::new("y", I16or32)])
-        .operands_out(vec![Operand::new("a", I16or32)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "x86_pmulhrsw",
-            r#"
-        A similar instruction to `sqmul_round_sat` except with the semantics
-        of x86's `pmulhrsw` instruction.
-
-        This is the same as `sqmul_round_sat` except when both input lanes are
-        `i16::MIN`.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", I16or32), Operand::new("y", I16or32)])
-        .operands_out(vec![Operand::new("a", I16or32)]),
-    );
-
-    // Integer division and remainder are scalar-only; most
-    // hardware does not directly support vector integer division.
-
-    ig.push(
-        Inst::new(
-            "udiv",
-            r#"
-        Unsigned integer division: `a := \lfloor {x \over y} \rfloor`.
-
-        This operation traps if the divisor is zero.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-        .operands_out(vec![Operand::new("a", iB)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    ig.push(
-        Inst::new(
-            "sdiv",
-            r#"
-        Signed integer division rounded toward zero: `a := sign(xy)
-        \lfloor {|x| \over |y|}\rfloor`.
-
-        This operation traps if the divisor is zero, or if the result is not
-        representable in `B` bits two's complement. This only happens
-        when `x = -2^{B-1}, y = -1`.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-        .operands_out(vec![Operand::new("a", iB)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    ig.push(
-        Inst::new(
-            "urem",
-            r#"
-        Unsigned integer remainder.
-
-        This operation traps if the divisor is zero.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-        .operands_out(vec![Operand::new("a", iB)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    ig.push(
-        Inst::new(
-            "srem",
-            r#"
-        Signed integer remainder. The result has the sign of the dividend.
-
-        This operation traps if the divisor is zero.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-        .operands_out(vec![Operand::new("a", iB)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    ig.push(
-        Inst::new(
-            "iadd_imm",
-            r#"
-        Add immediate integer.
-
-        Same as `iadd`, but one operand is a sign extended 64 bit immediate constant.
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "imul_imm",
-            r#"
-        Integer multiplication by immediate constant.
-
-        Same as `imul`, but one operand is a sign extended 64 bit immediate constant.
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "udiv_imm",
-            r#"
-        Unsigned integer division by an immediate constant.
-
-        Same as `udiv`, but one operand is a zero extended 64 bit immediate constant.
-
-        This operation traps if the divisor is zero.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "sdiv_imm",
-            r#"
-        Signed integer division by an immediate constant.
-
-        Same as `sdiv`, but one operand is a sign extended 64 bit immediate constant.
-
-        This operation traps if the divisor is zero, or if the result is not
-        representable in `B` bits two's complement. This only happens
-        when `x = -2^{B-1}, Y = -1`.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "urem_imm",
-            r#"
-        Unsigned integer remainder with immediate divisor.
-
-        Same as `urem`, but one operand is a zero extended 64 bit immediate constant.
-
-        This operation traps if the divisor is zero.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "srem_imm",
-            r#"
-        Signed integer remainder with immediate divisor.
-
-        Same as `srem`, but one operand is a sign extended 64 bit immediate constant.
-
-        This operation traps if the divisor is zero.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "irsub_imm",
-            r#"
-        Immediate reverse wrapping subtraction: `a := Y - x \pmod{2^B}`.
-
-        The immediate operand is a sign extended 64 bit constant.
-
-        Also works as integer negation when `Y = 0`. Use `iadd_imm`
-        with a negative immediate operand for the reverse immediate
-        subtraction.
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iadd_cin",
-            r#"
-        Add integers with carry in.
-
-        Same as `iadd` with an additional carry input. Computes:
-
-        ```text
-            a = x + y + c_{in} \pmod 2^B
-        ```
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("x", iB),
-            Operand::new("y", iB),
-            Operand::new("c_in", i8).with_doc("Input carry flag"),
-        ])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iadd_carry",
-            r#"
-        Add integers with carry in and out.
-
-        Same as `iadd` with an additional carry input and output.
-
-        ```text
-            a &= x + y + c_{in} \pmod 2^B \\
-            c_{out} &= x + y + c_{in} >= 2^B
-        ```
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("x", iB),
-            Operand::new("y", iB),
-            Operand::new("c_in", i8).with_doc("Input carry flag"),
-        ])
-        .operands_out(vec![
-            Operand::new("a", iB),
-            Operand::new("c_out", i8).with_doc("Output carry flag"),
-        ]),
-    );
-
-    {
-        let of_out = Operand::new("of", i8).with_doc("Overflow flag");
-        ig.push(
-            Inst::new(
-                "uadd_overflow",
-                r#"
-            Add integers unsigned with overflow out.
-            ``of`` is set when the addition overflowed.
-            ```text
-                a &= x + y \pmod 2^B \\
-                of &= x+y >= 2^B
-            ```
-            Polymorphic over all scalar integer types, but does not support vector
-            types.
-            "#,
-                &formats.binary,
-            )
-            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
-        );
-
-        ig.push(
-            Inst::new(
-                "sadd_overflow",
-                r#"
-            Add integers signed with overflow out.
-            ``of`` is set when the addition over- or underflowed.
-            Polymorphic over all scalar integer types, but does not support vector
-            types.
-            "#,
-                &formats.binary,
-            )
-            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
-        );
-
-        ig.push(
-            Inst::new(
-                "usub_overflow",
-                r#"
-            Subtract integers unsigned with overflow out.
-            ``of`` is set when the subtraction underflowed.
-            ```text
-                a &= x - y \pmod 2^B \\
-                of &= x - y < 0
-            ```
-            Polymorphic over all scalar integer types, but does not support vector
-            types.
-            "#,
-                &formats.binary,
-            )
-            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
-        );
-
-        ig.push(
-            Inst::new(
-                "ssub_overflow",
-                r#"
-            Subtract integers signed with overflow out.
-            ``of`` is set when the subtraction over- or underflowed.
-            Polymorphic over all scalar integer types, but does not support vector
-            types.
-            "#,
-                &formats.binary,
-            )
-            .operands_in(vec![Operand::new("x", iB), Operand::new("y", iB)])
-            .operands_out(vec![Operand::new("a", iB), of_out.clone()]),
-        );
-
-        {
-            let NarrowScalar = &TypeVar::new(
-                "NarrowScalar",
-                "A scalar integer type up to 64 bits",
-                TypeSetBuilder::new().ints(8..64).build(),
-            );
-
-            ig.push(
-                Inst::new(
-                    "umul_overflow",
-                    r#"
-                Multiply integers unsigned with overflow out.
-                ``of`` is set when the multiplication overflowed.
-                ```text
-                    a &= x * y \pmod 2^B \\
-                    of &= x * y > 2^B
-                ```
-                Polymorphic over all scalar integer types except i128, but does not support vector
-                types.
-                "#,
-                    &formats.binary,
-                )
-                .operands_in(vec![
-                    Operand::new("x", NarrowScalar),
-                    Operand::new("y", NarrowScalar),
-                ])
-                .operands_out(vec![Operand::new("a", NarrowScalar), of_out.clone()]),
-            );
-
-            ig.push(
-                Inst::new(
-                    "smul_overflow",
-                    r#"
-                Multiply integers signed with overflow out.
-                ``of`` is set when the multiplication over- or underflowed.
-                Polymorphic over all scalar integer types except i128, but does not support vector
-                types.
-                "#,
-                    &formats.binary,
-                )
-                .operands_in(vec![
-                    Operand::new("x", NarrowScalar),
-                    Operand::new("y", NarrowScalar),
-                ])
-                .operands_out(vec![Operand::new("a", NarrowScalar), of_out.clone()]),
-            );
-        }
-    }
-
-    let i32_64 = &TypeVar::new(
-        "i32_64",
-        "A 32 or 64-bit scalar integer type",
-        TypeSetBuilder::new().ints(32..64).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "uadd_overflow_trap",
-            r#"
-        Unsigned addition of x and y, trapping if the result overflows.
-
-        Accepts 32 or 64-bit integers, and does not support vector types.
-        "#,
-            &formats.int_add_trap,
-        )
-        .operands_in(vec![
-            Operand::new("x", i32_64),
-            Operand::new("y", i32_64),
-            Operand::new("code", &imm.trapcode),
-        ])
-        .operands_out(vec![Operand::new("a", i32_64)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    ig.push(
-        Inst::new(
-            "isub_bin",
-            r#"
-        Subtract integers with borrow in.
-
-        Same as `isub` with an additional borrow flag input. Computes:
-
-        ```text
-            a = x - (y + b_{in}) \pmod 2^B
-        ```
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("x", iB),
-            Operand::new("y", iB),
-            Operand::new("b_in", i8).with_doc("Input borrow flag"),
-        ])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "isub_borrow",
-            r#"
-        Subtract integers with borrow in and out.
-
-        Same as `isub` with an additional borrow flag input and output.
-
-        ```text
-            a &= x - (y + b_{in}) \pmod 2^B \\
-            b_{out} &= x < y + b_{in}
-        ```
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("x", iB),
-            Operand::new("y", iB),
-            Operand::new("b_in", i8).with_doc("Input borrow flag"),
-        ])
-        .operands_out(vec![
-            Operand::new("a", iB),
-            Operand::new("b_out", i8).with_doc("Output borrow flag"),
-        ]),
-    );
-
-    let bits = &TypeVar::new(
-        "bits",
-        "Any integer, float, or vector type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .floats(Interval::All)
-            .simd_lanes(Interval::All)
-            .includes_scalars(true)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "band",
-            r#"
-        Bitwise and.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bor",
-            r#"
-        Bitwise or.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bxor",
-            r#"
-        Bitwise xor.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bnot",
-            r#"
-        Bitwise not.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "band_not",
-            r#"
-        Bitwise and not.
-
-        Computes `x & ~y`.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bor_not",
-            r#"
-        Bitwise or not.
-
-        Computes `x | ~y`.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bxor_not",
-            r#"
-        Bitwise xor not.
-
-        Computes `x ^ ~y`.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", bits), Operand::new("y", bits)])
-        .operands_out(vec![Operand::new("a", bits)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "band_imm",
-            r#"
-        Bitwise and with immediate.
-
-        Same as `band`, but one operand is a zero extended 64 bit immediate constant.
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bor_imm",
-            r#"
-        Bitwise or with immediate.
-
-        Same as `bor`, but one operand is a zero extended 64 bit immediate constant.
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bxor_imm",
-            r#"
-        Bitwise xor with immediate.
-
-        Same as `bxor`, but one operand is a zero extended 64 bit immediate constant.
-
-        Polymorphic over all scalar integer types, but does not support vector
-        types.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![Operand::new("x", iB), Operand::new("Y", &imm.imm64)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "rotl",
-            r#"
-        Rotate left.
-
-        Rotate the bits in ``x`` by ``y`` places.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("y", iB).with_doc("Number of bits to shift"),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "rotr",
-            r#"
-        Rotate right.
-
-        Rotate the bits in ``x`` by ``y`` places.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("y", iB).with_doc("Number of bits to shift"),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "rotl_imm",
-            r#"
-        Rotate left by immediate.
-
-        Same as `rotl`, but one operand is a zero extended 64 bit immediate constant.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("Y", &imm.imm64),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "rotr_imm",
-            r#"
-        Rotate right by immediate.
-
-        Same as `rotr`, but one operand is a zero extended 64 bit immediate constant.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("Y", &imm.imm64),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ishl",
-            r#"
-        Integer shift left. Shift the bits in ``x`` towards the MSB by ``y``
-        places. Shift in zero bits to the LSB.
-
-        The shift amount is masked to the size of ``x``.
-
-        When shifting a B-bits integer type, this instruction computes:
-
-        ```text
-            s &:= y \pmod B,
-            a &:= x \cdot 2^s \pmod{2^B}.
-        ```
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("y", iB).with_doc("Number of bits to shift"),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ushr",
-            r#"
-        Unsigned shift right. Shift bits in ``x`` towards the LSB by ``y``
-        places, shifting in zero bits to the MSB. Also called a *logical
-        shift*.
-
-        The shift amount is masked to the size of ``x``.
-
-        When shifting a B-bits integer type, this instruction computes:
-
-        ```text
-            s &:= y \pmod B,
-            a &:= \lfloor x \cdot 2^{-s} \rfloor.
-        ```
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("y", iB).with_doc("Number of bits to shift"),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "sshr",
-            r#"
-        Signed shift right. Shift bits in ``x`` towards the LSB by ``y``
-        places, shifting in sign bits to the MSB. Also called an *arithmetic
-        shift*.
-
-        The shift amount is masked to the size of ``x``.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("y", iB).with_doc("Number of bits to shift"),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ishl_imm",
-            r#"
-        Integer shift left by immediate.
-
-        The shift amount is masked to the size of ``x``.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("Y", &imm.imm64),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ushr_imm",
-            r#"
-        Unsigned shift right by immediate.
-
-        The shift amount is masked to the size of ``x``.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("Y", &imm.imm64),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "sshr_imm",
-            r#"
-        Signed shift right by immediate.
-
-        The shift amount is masked to the size of ``x``.
-        "#,
-            &formats.binary_imm64,
-        )
-        .operands_in(vec![
-            Operand::new("x", Int).with_doc("Scalar or vector value to shift"),
-            Operand::new("Y", &imm.imm64),
-        ])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bitrev",
-            r#"
-        Reverse the bits of a integer.
-
-        Reverses the bits in ``x``.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", iB)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "clz",
-            r#"
-        Count leading zero bits.
-
-        Starting from the MSB in ``x``, count the number of zero bits before
-        reaching the first one bit. When ``x`` is zero, returns the size of x
-        in bits.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", iB)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "cls",
-            r#"
-        Count leading sign bits.
-
-        Starting from the MSB after the sign bit in ``x``, count the number of
-        consecutive bits identical to the sign bit. When ``x`` is 0 or -1,
-        returns one less than the size of x in bits.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", iB)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ctz",
-            r#"
-        Count trailing zeros.
-
-        Starting from the LSB in ``x``, count the number of zero bits before
-        reaching the first one bit. When ``x`` is zero, returns the size of x
-        in bits.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", iB)])
-        .operands_out(vec![Operand::new("a", iB)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bswap",
-            r#"
-        Reverse the byte order of an integer.
-
-        Reverses the bytes in ``x``.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", iSwappable)])
-        .operands_out(vec![Operand::new("a", iSwappable)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "popcnt",
-            r#"
-        Population count
-
-        Count the number of one bits in ``x``.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Int)])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    let Float = &TypeVar::new(
-        "Float",
-        "A scalar or vector floating point number",
-        TypeSetBuilder::new()
-            .floats(Interval::All)
-            .simd_lanes(Interval::All)
-            .dynamic_simd_lanes(Interval::All)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcmp",
-            r#"
-        Floating point comparison.
-
-        Two IEEE 754-2008 floating point numbers, `x` and `y`, relate to each
-        other in exactly one of four ways:
-
-        ```text
-        == ==========================================
-        UN Unordered when one or both numbers is NaN.
-        EQ When `x = y`. (And `0.0 = -0.0`).
-        LT When `x < y`.
-        GT When `x > y`.
-        == ==========================================
-        ```
-
-        The 14 `floatcc` condition codes each correspond to a subset of
-        the four relations, except for the empty set which would always be
-        false, and the full set which would always be true.
-
-        The condition codes are divided into 7 'ordered' conditions which don't
-        include UN, and 7 unordered conditions which all include UN.
-
-        ```text
-        +-------+------------+---------+------------+-------------------------+
-        |Ordered             |Unordered             |Condition                |
-        +=======+============+=========+============+=========================+
-        |ord    |EQ | LT | GT|uno      |UN          |NaNs absent / present.   |
-        +-------+------------+---------+------------+-------------------------+
-        |eq     |EQ          |ueq      |UN | EQ     |Equal                    |
-        +-------+------------+---------+------------+-------------------------+
-        |one    |LT | GT     |ne       |UN | LT | GT|Not equal                |
-        +-------+------------+---------+------------+-------------------------+
-        |lt     |LT          |ult      |UN | LT     |Less than                |
-        +-------+------------+---------+------------+-------------------------+
-        |le     |LT | EQ     |ule      |UN | LT | EQ|Less than or equal       |
-        +-------+------------+---------+------------+-------------------------+
-        |gt     |GT          |ugt      |UN | GT     |Greater than             |
-        +-------+------------+---------+------------+-------------------------+
-        |ge     |GT | EQ     |uge      |UN | GT | EQ|Greater than or equal    |
-        +-------+------------+---------+------------+-------------------------+
-        ```
-
-        The standard C comparison operators, `<, <=, >, >=`, are all ordered,
-        so they are false if either operand is NaN. The C equality operator,
-        `==`, is ordered, and since inequality is defined as the logical
-        inverse it is *unordered*. They map to the `floatcc` condition
-        codes as follows:
-
-        ```text
-        ==== ====== ============
-        C    `Cond` Subset
-        ==== ====== ============
-        `==` eq     EQ
-        `!=` ne     UN | LT | GT
-        `<`  lt     LT
-        `<=` le     LT | EQ
-        `>`  gt     GT
-        `>=` ge     GT | EQ
-        ==== ====== ============
-        ```
-
-        This subset of condition codes also corresponds to the WebAssembly
-        floating point comparisons of the same name.
-
-        When this instruction compares floating point vectors, it returns a
-        vector with the results of lane-wise comparisons.
-
-        When comparing scalars, the result is:
-            - `1` if the condition holds.
-            - `0` if the condition does not hold.
-
-        When comparing vectors, the result is:
-            - `-1` (i.e. all ones) in each lane where the condition holds.
-            - `0` in each lane where the condition does not hold.
-        "#,
-            &formats.float_compare,
-        )
-        .operands_in(vec![
-            Operand::new("Cond", &imm.floatcc),
-            Operand::new("x", Float),
-            Operand::new("y", Float),
-        ])
-        .operands_out(vec![Operand::new("a", &Float.as_truthy())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fadd",
-            r#"
-        Floating point addition.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fsub",
-            r#"
-        Floating point subtraction.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fmul",
-            r#"
-        Floating point multiplication.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fdiv",
-            r#"
-        Floating point division.
-
-        Unlike the integer division instructions ` and
-        `udiv`, this can't trap. Division by zero is infinity or
-        NaN, depending on the dividend.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "sqrt",
-            r#"
-        Floating point square root.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fma",
-            r#"
-        Floating point fused multiply-and-add.
-
-        Computes `a := xy+z` without any intermediate rounding of the
-        product.
-        "#,
-            &formats.ternary,
-        )
-        .operands_in(vec![
-            Operand::new("x", Float),
-            Operand::new("y", Float),
-            Operand::new("z", Float),
-        ])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("Result of applying operator to each lane")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fneg",
-            r#"
-        Floating point negation.
-
-        Note that this is a pure bitwise operation.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` with its sign bit inverted")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fabs",
-            r#"
-        Floating point absolute value.
-
-        Note that this is a pure bitwise operation.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` with its sign bit cleared")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcopysign",
-            r#"
-        Floating point copy sign.
-
-        Note that this is a pure bitwise operation. The sign bit from ``y`` is
-        copied to the sign bit of ``x``.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` with its sign bit changed to that of ``y``")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fmin",
-            r#"
-        Floating point minimum, propagating NaNs using the WebAssembly rules.
-
-        If either operand is NaN, this returns NaN with an unspecified sign. Furthermore, if
-        each input NaN consists of a mantissa whose most significant bit is 1 and the rest is
-        0, then the output has the same form. Otherwise, the output mantissa's most significant
-        bit is 1 and the rest is unspecified.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("The smaller of ``x`` and ``y``")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fmax",
-            r#"
-        Floating point maximum, propagating NaNs using the WebAssembly rules.
-
-        If either operand is NaN, this returns NaN with an unspecified sign. Furthermore, if
-        each input NaN consists of a mantissa whose most significant bit is 1 and the rest is
-        0, then the output has the same form. Otherwise, the output mantissa's most significant
-        bit is 1 and the rest is unspecified.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", Float), Operand::new("y", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("The larger of ``x`` and ``y``")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "ceil",
-            r#"
-        Round floating point round to integral, towards positive infinity.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "floor",
-            r#"
-        Round floating point round to integral, towards negative infinity.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "trunc",
-            r#"
-        Round floating point round to integral, towards zero.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "nearest",
-            r#"
-        Round floating point round to integral, towards nearest with ties to
-        even.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![
-            Operand::new("a", Float).with_doc("``x`` rounded to integral value")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "is_null",
-            r#"
-        Reference verification.
-
-        The condition code determines if the reference type in question is
-        null or not.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Ref)])
-        .operands_out(vec![Operand::new("a", i8)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "is_invalid",
-            r#"
-        Reference verification.
-
-        The condition code determines if the reference type in question is
-        invalid or not.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Ref)])
-        .operands_out(vec![Operand::new("a", i8)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "bitcast",
-            r#"
-        Reinterpret the bits in `x` as a different type.
-
-        The input and output types must be storable to memory and of the same
-        size. A bitcast is equivalent to storing one type and loading the other
-        type from the same address, both using the specified MemFlags.
-
-        Note that this operation only supports the `big` or `little` MemFlags.
-        The specified byte order only affects the result in the case where
-        input and output types differ in lane count/size.  In this case, the
-        operation is only valid if a byte order specifier is provided.
-        "#,
-            &formats.load_no_offset,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("x", Mem),
-        ])
-        .operands_out(vec![
-            Operand::new("a", MemTo).with_doc("Bits of `x` reinterpreted")
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "scalar_to_vector",
-            r#"
-            Copies a scalar value to a vector value.  The scalar is copied into the
-            least significant lane of the vector, and all other lanes will be zero.
-            "#,
-            &formats.unary,
-        )
-        .operands_in(vec![
-            Operand::new("s", &TxN.lane_of()).with_doc("A scalar value")
-        ])
-        .operands_out(vec![Operand::new("a", TxN).with_doc("A vector value")]),
-    );
-
-    let Truthy = &TypeVar::new(
-        "Truthy",
-        "A scalar whose values are truthy",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-    let IntTo = &TypeVar::new(
-        "IntTo",
-        "An integer type",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "bmask",
-            r#"
-        Convert `x` to an integer mask.
-
-        Non-zero maps to all 1s and zero maps to all 0s.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Truthy)])
-        .operands_out(vec![Operand::new("a", IntTo)]),
-    );
-
-    let Int = &TypeVar::new(
-        "Int",
-        "A scalar integer type",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "ireduce",
-            r#"
-        Convert `x` to a smaller integer type by discarding
-        the most significant bits.
-
-        This is the same as reducing modulo `2^n`.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", &Int.wider())
-            .with_doc("A scalar integer type, wider than the controlling type")])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    let I16or32or64xN = &TypeVar::new(
-        "I16or32or64xN",
-        "A SIMD vector type containing integer lanes 16, 32, or 64 bits wide",
-        TypeSetBuilder::new()
-            .ints(16..64)
-            .simd_lanes(2..8)
-            .dynamic_simd_lanes(2..8)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "snarrow",
-            r#"
-        Combine `x` and `y` into a vector with twice the lanes but half the integer width while
-        saturating overflowing values to the signed maximum and minimum.
-
-        The lanes will be concatenated after narrowing. For example, when `x` and `y` are `i32x4`
-        and `x = [x3, x2, x1, x0]` and `y = [y3, y2, y1, y0]`, then after narrowing the value
-        returned is an `i16x8`: `a = [y3', y2', y1', y0', x3', x2', x1', x0']`.
-            "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", I16or32or64xN),
-            Operand::new("y", I16or32or64xN),
-        ])
-        .operands_out(vec![Operand::new("a", &I16or32or64xN.split_lanes())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "unarrow",
-            r#"
-        Combine `x` and `y` into a vector with twice the lanes but half the integer width while
-        saturating overflowing values to the unsigned maximum and minimum.
-
-        Note that all input lanes are considered signed: any negative lanes will overflow and be
-        replaced with the unsigned minimum, `0x00`.
-
-        The lanes will be concatenated after narrowing. For example, when `x` and `y` are `i32x4`
-        and `x = [x3, x2, x1, x0]` and `y = [y3, y2, y1, y0]`, then after narrowing the value
-        returned is an `i16x8`: `a = [y3', y2', y1', y0', x3', x2', x1', x0']`.
-            "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", I16or32or64xN),
-            Operand::new("y", I16or32or64xN),
-        ])
-        .operands_out(vec![Operand::new("a", &I16or32or64xN.split_lanes())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "uunarrow",
-            r#"
-        Combine `x` and `y` into a vector with twice the lanes but half the integer width while
-        saturating overflowing values to the unsigned maximum and minimum.
-
-        Note that all input lanes are considered unsigned: any negative values will be interpreted as unsigned, overflowing and being replaced with the unsigned maximum.
-
-        The lanes will be concatenated after narrowing. For example, when `x` and `y` are `i32x4`
-        and `x = [x3, x2, x1, x0]` and `y = [y3, y2, y1, y0]`, then after narrowing the value
-        returned is an `i16x8`: `a = [y3', y2', y1', y0', x3', x2', x1', x0']`.
-            "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", I16or32or64xN), Operand::new("y", I16or32or64xN)])
-        .operands_out(vec![Operand::new("a", &I16or32or64xN.split_lanes())]),
-    );
-
-    let I8or16or32xN = &TypeVar::new(
-        "I8or16or32xN",
-        "A SIMD vector type containing integer lanes 8, 16, or 32 bits wide.",
-        TypeSetBuilder::new()
-            .ints(8..32)
-            .simd_lanes(2..16)
-            .dynamic_simd_lanes(2..16)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "swiden_low",
-            r#"
-        Widen the low lanes of `x` using signed extension.
-
-        This will double the lane width and halve the number of lanes.
-            "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", I8or16or32xN)])
-        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "swiden_high",
-            r#"
-        Widen the high lanes of `x` using signed extension.
-
-        This will double the lane width and halve the number of lanes.
-            "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", I8or16or32xN)])
-        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "uwiden_low",
-            r#"
-        Widen the low lanes of `x` using unsigned extension.
-
-        This will double the lane width and halve the number of lanes.
-            "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", I8or16or32xN)])
-        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "uwiden_high",
-            r#"
-            Widen the high lanes of `x` using unsigned extension.
-
-            This will double the lane width and halve the number of lanes.
-            "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", I8or16or32xN)])
-        .operands_out(vec![Operand::new("a", &I8or16or32xN.merge_lanes())]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iadd_pairwise",
-            r#"
-        Does lane-wise integer pairwise addition on two operands, putting the
-        combined results into a single vector result. Here a pair refers to adjacent
-        lanes in a vector, i.e. i*2 + (i*2+1) for i == num_lanes/2. The first operand
-        pairwise add results will make up the low half of the resulting vector while
-        the second operand pairwise add results will make up the upper half of the
-        resulting vector.
-            "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("x", I8or16or32xN),
-            Operand::new("y", I8or16or32xN),
-        ])
-        .operands_out(vec![Operand::new("a", I8or16or32xN)]),
-    );
-
-    let I8x16 = &TypeVar::new(
-        "I8x16",
-        "A SIMD vector type consisting of 16 lanes of 8-bit integers",
-        TypeSetBuilder::new()
-            .ints(8..8)
-            .simd_lanes(16..16)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "x86_pmaddubsw",
-            r#"
-        An instruction with equivalent semantics to `pmaddubsw` on x86.
-
-        This instruction will take signed bytes from the first argument and
-        multiply them against unsigned bytes in the second argument. Adjacent
-        pairs are then added, with saturating, to a 16-bit value and are packed
-        into the result.
-            "#,
-            &formats.binary,
-        )
-        .operands_in(vec![Operand::new("x", I8x16), Operand::new("y", I8x16)])
-        .operands_out(vec![Operand::new("a", I16x8)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "uextend",
-            r#"
-        Convert `x` to a larger integer type by zero-extending.
-
-        Each lane in `x` is converted to a larger integer type by adding
-        zeroes. The result has the same numerical value as `x` when both are
-        interpreted as unsigned integers.
-
-        The result type must have the same number of vector lanes as the input,
-        and each lane must not have fewer bits that the input lanes. If the
-        input and output types are the same, this is a no-op.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", &Int.narrower()).with_doc(
-            "A scalar integer type, narrower than the controlling type",
-        )])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "sextend",
-            r#"
-        Convert `x` to a larger integer type by sign-extending.
-
-        Each lane in `x` is converted to a larger integer type by replicating
-        the sign bit. The result has the same numerical value as `x` when both
-        are interpreted as signed integers.
-
-        The result type must have the same number of vector lanes as the input,
-        and each lane must not have fewer bits that the input lanes. If the
-        input and output types are the same, this is a no-op.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", &Int.narrower()).with_doc(
-            "A scalar integer type, narrower than the controlling type",
-        )])
-        .operands_out(vec![Operand::new("a", Int)]),
-    );
-
-    let FloatScalar = &TypeVar::new(
-        "FloatScalar",
-        "A scalar only floating point number",
-        TypeSetBuilder::new().floats(Interval::All).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fpromote",
-            r#"
-        Convert `x` to a larger floating point format.
-
-        Each lane in `x` is converted to the destination floating point format.
-        This is an exact operation.
-
-        Cranelift currently only supports two floating point formats
-        - `f32` and `f64`. This may change in the future.
-
-        The result type must have the same number of vector lanes as the input,
-        and the result lanes must not have fewer bits than the input lanes.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", &FloatScalar.narrower()).with_doc(
-            "A scalar only floating point number, narrower than the controlling type",
-        )])
-        .operands_out(vec![Operand::new("a", FloatScalar)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fdemote",
-            r#"
-        Convert `x` to a smaller floating point format.
-
-        Each lane in `x` is converted to the destination floating point format
-        by rounding to nearest, ties to even.
-
-        Cranelift currently only supports two floating point formats
-        - `f32` and `f64`. This may change in the future.
-
-        The result type must have the same number of vector lanes as the input,
-        and the result lanes must not have more bits than the input lanes.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", &FloatScalar.wider()).with_doc(
-            "A scalar only floating point number, wider than the controlling type",
-        )])
-        .operands_out(vec![Operand::new("a", FloatScalar)]),
-    );
-
-    let F64x2 = &TypeVar::new(
-        "F64x2",
-        "A SIMD vector type consisting of 2 lanes of 64-bit floats",
-        TypeSetBuilder::new()
-            .floats(64..64)
-            .simd_lanes(2..2)
-            .includes_scalars(false)
-            .build(),
-    );
-    let F32x4 = &TypeVar::new(
-        "F32x4",
-        "A SIMD vector type consisting of 4 lanes of 32-bit floats",
-        TypeSetBuilder::new()
-            .floats(32..32)
-            .simd_lanes(4..4)
-            .includes_scalars(false)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fvdemote",
-            r#"
-                Convert `x` to a smaller floating point format.
-
-                Each lane in `x` is converted to the destination floating point format
-                by rounding to nearest, ties to even.
-
-                Cranelift currently only supports two floating point formats
-                - `f32` and `f64`. This may change in the future.
-
-                Fvdemote differs from fdemote in that with fvdemote it targets vectors.
-                Fvdemote is constrained to having the input type being F64x2 and the result
-                type being F32x4. The result lane that was the upper half of the input lane
-                is initialized to zero.
-                "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", F64x2)])
-        .operands_out(vec![Operand::new("a", F32x4)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fvpromote_low",
-            r#"
-        Converts packed single precision floating point to packed double precision floating point.
-
-        Considering only the lower half of the register, the low lanes in `x` are interpreted as
-        single precision floats that are then converted to a double precision floats.
-
-        The result type will have half the number of vector lanes as the input. Fvpromote_low is
-        constrained to input F32x4 with a result type of F64x2.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("a", F32x4)])
-        .operands_out(vec![Operand::new("x", F64x2)]),
-    );
-
-    let IntTo = &TypeVar::new(
-        "IntTo",
-        "An scalar only integer type",
-        TypeSetBuilder::new().ints(Interval::All).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcvt_to_uint",
-            r#"
-        Converts floating point scalars to unsigned integer.
-
-        Only operates on `x` if it is a scalar. If `x` is NaN or if
-        the unsigned integral value cannot be represented in the result
-        type, this instruction traps.
-
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", FloatScalar)])
-        .operands_out(vec![Operand::new("a", IntTo)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcvt_to_sint",
-            r#"
-        Converts floating point scalars to signed integer.
-
-        Only operates on `x` if it is a scalar. If `x` is NaN or if
-        the unsigned integral value cannot be represented in the result
-        type, this instruction traps.
-
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", FloatScalar)])
-        .operands_out(vec![Operand::new("a", IntTo)])
-        .can_trap()
-        .side_effects_idempotent(),
-    );
-
-    let IntTo = &TypeVar::new(
-        "IntTo",
-        "A larger integer type with the same number of lanes",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .simd_lanes(Interval::All)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcvt_to_uint_sat",
-            r#"
-        Convert floating point to unsigned integer as fcvt_to_uint does, but
-        saturates the input instead of trapping. NaN and negative values are
-        converted to 0.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![Operand::new("a", IntTo)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcvt_to_sint_sat",
-            r#"
-        Convert floating point to signed integer as fcvt_to_sint does, but
-        saturates the input instead of trapping. NaN values are converted to 0.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![Operand::new("a", IntTo)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "x86_cvtt2dq",
-            r#"
-        A float-to-integer conversion instruction for vectors-of-floats which
-        has the same semantics as `cvttp{s,d}2dq` on x86. This specifically
-        returns `INT_MIN` for NaN or out-of-bounds lanes.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Float)])
-        .operands_out(vec![Operand::new("a", IntTo)]),
-    );
-
-    let Int = &TypeVar::new(
-        "Int",
-        "A scalar or vector integer type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .simd_lanes(Interval::All)
-            .build(),
-    );
-
-    let FloatTo = &TypeVar::new(
-        "FloatTo",
-        "A scalar or vector floating point number",
-        TypeSetBuilder::new()
-            .floats(Interval::All)
-            .simd_lanes(Interval::All)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcvt_from_uint",
-            r#"
-        Convert unsigned integer to floating point.
-
-        Each lane in `x` is interpreted as an unsigned integer and converted to
-        floating point using round to nearest, ties to even.
-
-        The result type must have the same number of vector lanes as the input.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Int)])
-        .operands_out(vec![Operand::new("a", FloatTo)]),
-    );
-
-    ig.push(
-        Inst::new(
-            "fcvt_from_sint",
-            r#"
-        Convert signed integer to floating point.
-
-        Each lane in `x` is interpreted as a signed integer and converted to
-        floating point using round to nearest, ties to even.
-
-        The result type must have the same number of vector lanes as the input.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", Int)])
-        .operands_out(vec![Operand::new("a", FloatTo)]),
-    );
-
-    let WideInt = &TypeVar::new(
-        "WideInt",
-        "An integer type of width `i16` upwards",
-        TypeSetBuilder::new().ints(16..128).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "isplit",
-            r#"
-        Split an integer into low and high parts.
-
-        Vectors of integers are split lane-wise, so the results have the same
-        number of lanes as the input, but the lanes are half the size.
-
-        Returns the low half of `x` and the high half of `x` as two independent
-        values.
-        "#,
-            &formats.unary,
-        )
-        .operands_in(vec![Operand::new("x", WideInt)])
-        .operands_out(vec![
-            Operand::new("lo", &WideInt.half_width()).with_doc("The low bits of `x`"),
-            Operand::new("hi", &WideInt.half_width()).with_doc("The high bits of `x`"),
-        ]),
-    );
-
-    ig.push(
-        Inst::new(
-            "iconcat",
-            r#"
-        Concatenate low and high bits to form a larger integer type.
-
-        Vectors of integers are concatenated lane-wise such that the result has
-        the same number of lanes as the inputs, but the lanes are twice the
-        size.
-        "#,
-            &formats.binary,
-        )
-        .operands_in(vec![
-            Operand::new("lo", NarrowInt),
-            Operand::new("hi", NarrowInt),
-        ])
-        .operands_out(vec![Operand::new("a", &NarrowInt.double_width())
-            .with_doc("The concatenation of `lo` and `hi`")]),
-    );
-
-    // Instructions relating to atomic memory accesses and fences
-    let AtomicMem = &TypeVar::new(
-        "AtomicMem",
-        "Any type that can be stored in memory, which can be used in an atomic operation",
-        TypeSetBuilder::new().ints(8..64).build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "atomic_rmw",
-            r#"
-        Atomically read-modify-write memory at `p`, with second operand `x`.  The old value is
-        returned.  `p` has the type of the target word size, and `x` may be an integer type of
-        8, 16, 32 or 64 bits, even on a 32-bit target.  The type of the returned value is the
-        same as the type of `x`.  This operation is sequentially consistent and creates
-        happens-before edges that order normal (non-atomic) loads and stores.
-        "#,
-            &formats.atomic_rmw,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("AtomicRmwOp", &imm.atomic_rmw_op),
-            Operand::new("p", iAddr),
-            Operand::new("x", AtomicMem).with_doc("Value to be atomically stored"),
-        ])
-        .operands_out(vec![
-            Operand::new("a", AtomicMem).with_doc("Value atomically loaded")
-        ])
-        .can_load()
-        .can_store()
-        .other_side_effects(),
-    );
-
-    ig.push(
-        Inst::new(
-            "atomic_cas",
-            r#"
-        Perform an atomic compare-and-swap operation on memory at `p`, with expected value `e`,
-        storing `x` if the value at `p` equals `e`.  The old value at `p` is returned,
-        regardless of whether the operation succeeds or fails.  `p` has the type of the target
-        word size, and `x` and `e` must have the same type and the same size, which may be an
-        integer type of 8, 16, 32 or 64 bits, even on a 32-bit target.  The type of the returned
-        value is the same as the type of `x` and `e`.  This operation is sequentially
-        consistent and creates happens-before edges that order normal (non-atomic) loads and
-        stores.
-        "#,
-            &formats.atomic_cas,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-            Operand::new("e", AtomicMem).with_doc("Expected value in CAS"),
-            Operand::new("x", AtomicMem).with_doc("Value to be atomically stored"),
-        ])
-        .operands_out(vec![
-            Operand::new("a", AtomicMem).with_doc("Value atomically loaded")
-        ])
-        .can_load()
-        .can_store()
-        .other_side_effects(),
-    );
-
-    ig.push(
-        Inst::new(
-            "atomic_load",
-            r#"
-        Atomically load from memory at `p`.
-
-        This is a polymorphic instruction that can load any value type which has a memory
-        representation.  It should only be used for integer types with 8, 16, 32 or 64 bits.
-        This operation is sequentially consistent and creates happens-before edges that order
-        normal (non-atomic) loads and stores.
-        "#,
-            &formats.load_no_offset,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("p", iAddr),
-        ])
-        .operands_out(vec![
-            Operand::new("a", AtomicMem).with_doc("Value atomically loaded")
-        ])
-        .can_load()
-        .other_side_effects(),
-    );
-
-    ig.push(
-        Inst::new(
-            "atomic_store",
-            r#"
-        Atomically store `x` to memory at `p`.
-
-        This is a polymorphic instruction that can store any value type with a memory
-        representation.  It should only be used for integer types with 8, 16, 32 or 64 bits.
-        This operation is sequentially consistent and creates happens-before edges that order
-        normal (non-atomic) loads and stores.
-        "#,
-            &formats.store_no_offset,
-        )
-        .operands_in(vec![
-            Operand::new("MemFlags", &imm.memflags),
-            Operand::new("x", AtomicMem).with_doc("Value to be atomically stored"),
-            Operand::new("p", iAddr),
-        ])
-        .can_store()
-        .other_side_effects(),
-    );
-
-    ig.push(
-        Inst::new(
-            "fence",
-            r#"
-        A memory fence.  This must provide ordering to ensure that, at a minimum, neither loads
-        nor stores of any kind may move forwards or backwards across the fence.  This operation
-        is sequentially consistent.
-        "#,
-            &formats.nullary,
-        )
-        .other_side_effects(),
-    );
-
-    let TxN = &TypeVar::new(
-        "TxN",
-        "A dynamic vector type",
-        TypeSetBuilder::new()
-            .ints(Interval::All)
-            .floats(Interval::All)
-            .dynamic_simd_lanes(Interval::All)
-            .build(),
-    );
-
-    ig.push(
-        Inst::new(
-            "extract_vector",
-            r#"
-        Return a fixed length sub vector, extracted from a dynamic vector.
-        "#,
-            &formats.binary_imm8,
-        )
-        .operands_in(vec![
-            Operand::new("x", TxN).with_doc("The dynamic vector to extract from"),
-            Operand::new("y", &imm.uimm8).with_doc("128-bit vector index"),
-        ])
-        .operands_out(vec![
-            Operand::new("a", &TxN.dynamic_to_vector()).with_doc("New fixed vector")
-        ]),
-    );
-}