warp-lang 1.7.0__py3-none-manylinux_2_28_x86_64.whl

warp/sim/articulation.py

@@ -0,0 +1,793 @@
+# SPDX-FileCopyrightText: Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import warp as wp
+
+from .utils import quat_decompose, quat_twist
+
+
+@wp.func
+def compute_2d_rotational_dofs(
+    axis_0: wp.vec3,
+    axis_1: wp.vec3,
+    q0: float,
+    q1: float,
+    qd0: float,
+    qd1: float,
+):
+    """
+    Computes the rotation quaternion and 3D angular velocity given the joint axes, coordinates and velocities.
+    """
+    q_off = wp.quat_from_matrix(wp.matrix_from_cols(axis_0, axis_1, wp.cross(axis_0, axis_1)))
+
+    # body local axes
+    local_0 = wp.quat_rotate(q_off, wp.vec3(1.0, 0.0, 0.0))
+    local_1 = wp.quat_rotate(q_off, wp.vec3(0.0, 1.0, 0.0))
+
+    axis_0 = local_0
+    q_0 = wp.quat_from_axis_angle(axis_0, q0)
+
+    axis_1 = wp.quat_rotate(q_0, local_1)
+    q_1 = wp.quat_from_axis_angle(axis_1, q1)
+
+    rot = q_1 * q_0
+
+    vel = axis_0 * qd0 + axis_1 * qd1
+
+    return rot, vel
+
+
+@wp.func
+def invert_2d_rotational_dofs(
+    axis_0: wp.vec3,
+    axis_1: wp.vec3,
+    q_p: wp.quat,
+    q_c: wp.quat,
+    w_err: wp.vec3,
+):
+    """
+    Computes generalized joint position and velocity coordinates for a 2D rotational joint given the joint axes, relative orientations and angular velocity differences between the two bodies the joint connects.
+    """
+    q_off = wp.quat_from_matrix(wp.matrix_from_cols(axis_0, axis_1, wp.cross(axis_0, axis_1)))
+    q_pc = wp.quat_inverse(q_off) * wp.quat_inverse(q_p) * q_c * q_off
+
+    # decompose to a compound rotation each axis
+    angles = quat_decompose(q_pc)
+
+    # find rotation axes
+    local_0 = wp.quat_rotate(q_off, wp.vec3(1.0, 0.0, 0.0))
+    local_1 = wp.quat_rotate(q_off, wp.vec3(0.0, 1.0, 0.0))
+    local_2 = wp.quat_rotate(q_off, wp.vec3(0.0, 0.0, 1.0))
+
+    axis_0 = local_0
+    q_0 = wp.quat_from_axis_angle(axis_0, angles[0])
+
+    axis_1 = wp.quat_rotate(q_0, local_1)
+    q_1 = wp.quat_from_axis_angle(axis_1, angles[1])
+
+    axis_2 = wp.quat_rotate(q_1 * q_0, local_2)
+
+    # convert angular velocity to local space
+    w_err_p = wp.quat_rotate_inv(q_p, w_err)
+
+    # given joint axes and angular velocity error, solve for joint velocities
+    c12 = wp.cross(axis_1, axis_2)
+    c02 = wp.cross(axis_0, axis_2)
+
+    vel = wp.vec2(wp.dot(w_err_p, c12) / wp.dot(axis_0, c12), wp.dot(w_err_p, c02) / wp.dot(axis_1, c02))
+
+    return wp.vec2(angles[0], angles[1]), vel
+
+
+@wp.func
+def compute_3d_rotational_dofs(
+    axis_0: wp.vec3,
+    axis_1: wp.vec3,
+    axis_2: wp.vec3,
+    q0: float,
+    q1: float,
+    q2: float,
+    qd0: float,
+    qd1: float,
+    qd2: float,
+):
+    """
+    Computes the rotation quaternion and 3D angular velocity given the joint axes, coordinates and velocities.
+    """
+    q_off = wp.quat_from_matrix(wp.matrix_from_cols(axis_0, axis_1, axis_2))
+
+    # body local axes
+    local_0 = wp.quat_rotate(q_off, wp.vec3(1.0, 0.0, 0.0))
+    local_1 = wp.quat_rotate(q_off, wp.vec3(0.0, 1.0, 0.0))
+    local_2 = wp.quat_rotate(q_off, wp.vec3(0.0, 0.0, 1.0))
+
+    # reconstruct rotation axes
+    axis_0 = local_0
+    q_0 = wp.quat_from_axis_angle(axis_0, q0)
+
+    axis_1 = wp.quat_rotate(q_0, local_1)
+    q_1 = wp.quat_from_axis_angle(axis_1, q1)
+
+    axis_2 = wp.quat_rotate(q_1 * q_0, local_2)
+    q_2 = wp.quat_from_axis_angle(axis_2, q2)
+
+    rot = q_2 * q_1 * q_0
+    vel = axis_0 * qd0 + axis_1 * qd1 + axis_2 * qd2
+
+    return rot, vel
+
+
+@wp.func
+def invert_3d_rotational_dofs(
+    axis_0: wp.vec3, axis_1: wp.vec3, axis_2: wp.vec3, q_p: wp.quat, q_c: wp.quat, w_err: wp.vec3
+):
+    """
+    Computes generalized joint position and velocity coordinates for a 3D rotational joint given the joint axes, relative orientations and angular velocity differences between the two bodies the joint connects.
+    """
+    q_off = wp.quat_from_matrix(wp.matrix_from_cols(axis_0, axis_1, axis_2))
+    q_pc = wp.quat_inverse(q_off) * wp.quat_inverse(q_p) * q_c * q_off
+
+    # decompose to a compound rotation each axis
+    angles = quat_decompose(q_pc)
+
+    # find rotation axes
+    local_0 = wp.quat_rotate(q_off, wp.vec3(1.0, 0.0, 0.0))
+    local_1 = wp.quat_rotate(q_off, wp.vec3(0.0, 1.0, 0.0))
+    local_2 = wp.quat_rotate(q_off, wp.vec3(0.0, 0.0, 1.0))
+
+    axis_0 = local_0
+    q_0 = wp.quat_from_axis_angle(axis_0, angles[0])
+
+    axis_1 = wp.quat_rotate(q_0, local_1)
+    q_1 = wp.quat_from_axis_angle(axis_1, angles[1])
+
+    axis_2 = wp.quat_rotate(q_1 * q_0, local_2)
+
+    # convert angular velocity to local space
+    w_err_p = wp.quat_rotate_inv(q_p, w_err)
+
+    # given joint axes and angular velocity error, solve for joint velocities
+    c12 = wp.cross(axis_1, axis_2)
+    c02 = wp.cross(axis_0, axis_2)
+    c01 = wp.cross(axis_0, axis_1)
+
+    velocities = wp.vec3(
+        wp.dot(w_err_p, c12) / wp.dot(axis_0, c12),
+        wp.dot(w_err_p, c02) / wp.dot(axis_1, c02),
+        wp.dot(w_err_p, c01) / wp.dot(axis_2, c01),
+    )
+
+    return angles, velocities
+
+
+@wp.func
+def eval_single_articulation_fk(
+    joint_start: int,
+    joint_end: int,
+    joint_q: wp.array(dtype=float),
+    joint_qd: wp.array(dtype=float),
+    joint_q_start: wp.array(dtype=int),
+    joint_qd_start: wp.array(dtype=int),
+    joint_type: wp.array(dtype=int),
+    joint_parent: wp.array(dtype=int),
+    joint_child: wp.array(dtype=int),
+    joint_X_p: wp.array(dtype=wp.transform),
+    joint_X_c: wp.array(dtype=wp.transform),
+    joint_axis: wp.array(dtype=wp.vec3),
+    joint_axis_start: wp.array(dtype=int),
+    joint_axis_dim: wp.array(dtype=int, ndim=2),
+    body_com: wp.array(dtype=wp.vec3),
+    # outputs
+    body_q: wp.array(dtype=wp.transform),
+    body_qd: wp.array(dtype=wp.spatial_vector),
+):
+    for i in range(joint_start, joint_end):
+        parent = joint_parent[i]
+        child = joint_child[i]
+
+        # compute transform across the joint
+        type = joint_type[i]
+
+        X_pj = joint_X_p[i]
+        X_cj = joint_X_c[i]
+
+        # parent anchor frame in world space
+        X_wpj = X_pj
+        # velocity of parent anchor point in world space
+        v_wpj = wp.spatial_vector()
+        if parent >= 0:
+            X_wp = body_q[parent]
+            X_wpj = X_wp * X_wpj
+            r_p = wp.transform_get_translation(X_wpj) - wp.transform_point(X_wp, body_com[parent])
+
+            v_wp = body_qd[parent]
+            w_p = wp.spatial_top(v_wp)
+            v_p = wp.spatial_bottom(v_wp) + wp.cross(w_p, r_p)
+            v_wpj = wp.spatial_vector(w_p, v_p)
+
+        q_start = joint_q_start[i]
+        qd_start = joint_qd_start[i]
+        axis_start = joint_axis_start[i]
+        lin_axis_count = joint_axis_dim[i, 0]
+        ang_axis_count = joint_axis_dim[i, 1]
+
+        X_j = wp.transform_identity()
+        v_j = wp.spatial_vector(wp.vec3(), wp.vec3())
+
+        if type == wp.sim.JOINT_PRISMATIC:
+            axis = joint_axis[axis_start]
+
+            q = joint_q[q_start]
+            qd = joint_qd[qd_start]
+
+            X_j = wp.transform(axis * q, wp.quat_identity())
+            v_j = wp.spatial_vector(wp.vec3(), axis * qd)
+
+        if type == wp.sim.JOINT_REVOLUTE:
+            axis = joint_axis[axis_start]
+
+            q = joint_q[q_start]
+            qd = joint_qd[qd_start]
+
+            X_j = wp.transform(wp.vec3(), wp.quat_from_axis_angle(axis, q))
+            v_j = wp.spatial_vector(axis * qd, wp.vec3())
+
+        if type == wp.sim.JOINT_BALL:
+            r = wp.quat(joint_q[q_start + 0], joint_q[q_start + 1], joint_q[q_start + 2], joint_q[q_start + 3])
+
+            w = wp.vec3(joint_qd[qd_start + 0], joint_qd[qd_start + 1], joint_qd[qd_start + 2])
+
+            X_j = wp.transform(wp.vec3(), r)
+            v_j = wp.spatial_vector(w, wp.vec3())
+
+        if type == wp.sim.JOINT_FREE or type == wp.sim.JOINT_DISTANCE:
+            t = wp.transform(
+                wp.vec3(joint_q[q_start + 0], joint_q[q_start + 1], joint_q[q_start + 2]),
+                wp.quat(joint_q[q_start + 3], joint_q[q_start + 4], joint_q[q_start + 5], joint_q[q_start + 6]),
+            )
+
+            v = wp.spatial_vector(
+                wp.vec3(joint_qd[qd_start + 0], joint_qd[qd_start + 1], joint_qd[qd_start + 2]),
+                wp.vec3(joint_qd[qd_start + 3], joint_qd[qd_start + 4], joint_qd[qd_start + 5]),
+            )
+
+            X_j = t
+            v_j = v
+
+        if type == wp.sim.JOINT_COMPOUND:
+            rot, vel_w = compute_3d_rotational_dofs(
+                joint_axis[axis_start],
+                joint_axis[axis_start + 1],
+                joint_axis[axis_start + 2],
+                joint_q[q_start + 0],
+                joint_q[q_start + 1],
+                joint_q[q_start + 2],
+                joint_qd[qd_start + 0],
+                joint_qd[qd_start + 1],
+                joint_qd[qd_start + 2],
+            )
+
+            t = wp.transform(wp.vec3(0.0, 0.0, 0.0), rot)
+            v = wp.spatial_vector(vel_w, wp.vec3(0.0, 0.0, 0.0))
+
+            X_j = t
+            v_j = v
+
+        if type == wp.sim.JOINT_UNIVERSAL:
+            rot, vel_w = compute_2d_rotational_dofs(
+                joint_axis[axis_start],
+                joint_axis[axis_start + 1],
+                joint_q[q_start + 0],
+                joint_q[q_start + 1],
+                joint_qd[qd_start + 0],
+                joint_qd[qd_start + 1],
+            )
+
+            t = wp.transform(wp.vec3(0.0, 0.0, 0.0), rot)
+            v = wp.spatial_vector(vel_w, wp.vec3(0.0, 0.0, 0.0))
+
+            X_j = t
+            v_j = v
+
+        if type == wp.sim.JOINT_D6:
+            pos = wp.vec3(0.0)
+            rot = wp.quat_identity()
+            vel_v = wp.vec3(0.0)
+            vel_w = wp.vec3(0.0)
+
+            # unroll for loop to ensure joint actions remain differentiable
+            # (since differentiating through a for loop that updates a local variable is not supported)
+
+            if lin_axis_count > 0:
+                axis = joint_axis[axis_start + 0]
+                pos += axis * joint_q[q_start + 0]
+                vel_v += axis * joint_qd[qd_start + 0]
+            if lin_axis_count > 1:
+                axis = joint_axis[axis_start + 1]
+                pos += axis * joint_q[q_start + 1]
+                vel_v += axis * joint_qd[qd_start + 1]
+            if lin_axis_count > 2:
+                axis = joint_axis[axis_start + 2]
+                pos += axis * joint_q[q_start + 2]
+                vel_v += axis * joint_qd[qd_start + 2]
+
+            ia = axis_start + lin_axis_count
+            iq = q_start + lin_axis_count
+            iqd = qd_start + lin_axis_count
+            if ang_axis_count == 1:
+                axis = joint_axis[ia]
+                rot = wp.quat_from_axis_angle(axis, joint_q[iq])
+                vel_w = joint_qd[iqd] * axis
+            if ang_axis_count == 2:
+                rot, vel_w = compute_2d_rotational_dofs(
+                    joint_axis[ia + 0],
+                    joint_axis[ia + 1],
+                    joint_q[iq + 0],
+                    joint_q[iq + 1],
+                    joint_qd[iqd + 0],
+                    joint_qd[iqd + 1],
+                )
+            if ang_axis_count == 3:
+                rot, vel_w = compute_3d_rotational_dofs(
+                    joint_axis[ia + 0],
+                    joint_axis[ia + 1],
+                    joint_axis[ia + 2],
+                    joint_q[iq + 0],
+                    joint_q[iq + 1],
+                    joint_q[iq + 2],
+                    joint_qd[iqd + 0],
+                    joint_qd[iqd + 1],
+                    joint_qd[iqd + 2],
+                )
+
+            X_j = wp.transform(pos, rot)
+            v_j = wp.spatial_vector(vel_w, vel_v)
+
+        # transform from world to joint anchor frame at child body
+        X_wcj = X_wpj * X_j
+        # transform from world to child body frame
+        X_wc = X_wcj * wp.transform_inverse(X_cj)
+
+        # transform velocity across the joint to world space
+        angular_vel = wp.transform_vector(X_wpj, wp.spatial_top(v_j))
+        linear_vel = wp.transform_vector(X_wpj, wp.spatial_bottom(v_j))
+
+        v_wc = v_wpj + wp.spatial_vector(angular_vel, linear_vel)
+
+        body_q[child] = X_wc
+        body_qd[child] = v_wc
+
+
+# implementation where mask is an integer array
+@wp.kernel
+def eval_articulation_fk(
+    articulation_start: wp.array(dtype=int),
+    articulation_mask: wp.array(
+        dtype=int
+    ),  # used to enable / disable FK for an articulation, if None then treat all as enabled
+    joint_q: wp.array(dtype=float),
+    joint_qd: wp.array(dtype=float),
+    joint_q_start: wp.array(dtype=int),
+    joint_qd_start: wp.array(dtype=int),
+    joint_type: wp.array(dtype=int),
+    joint_parent: wp.array(dtype=int),
+    joint_child: wp.array(dtype=int),
+    joint_X_p: wp.array(dtype=wp.transform),
+    joint_X_c: wp.array(dtype=wp.transform),
+    joint_axis: wp.array(dtype=wp.vec3),
+    joint_axis_start: wp.array(dtype=int),
+    joint_axis_dim: wp.array(dtype=int, ndim=2),
+    body_com: wp.array(dtype=wp.vec3),
+    # outputs
+    body_q: wp.array(dtype=wp.transform),
+    body_qd: wp.array(dtype=wp.spatial_vector),
+):
+    tid = wp.tid()
+
+    # early out if disabling FK for this articulation
+    if articulation_mask:
+        if articulation_mask[tid] == 0:
+            return
+
+    joint_start = articulation_start[tid]
+    joint_end = articulation_start[tid + 1]
+
+    eval_single_articulation_fk(
+        joint_start,
+        joint_end,
+        joint_q,
+        joint_qd,
+        joint_q_start,
+        joint_qd_start,
+        joint_type,
+        joint_parent,
+        joint_child,
+        joint_X_p,
+        joint_X_c,
+        joint_axis,
+        joint_axis_start,
+        joint_axis_dim,
+        body_com,
+        # outputs
+        body_q,
+        body_qd,
+    )
+
+
+# overload where mask is a bool array
+@wp.kernel
+def eval_articulation_fk(
+    articulation_start: wp.array(dtype=int),
+    articulation_mask: wp.array(
+        dtype=bool
+    ),  # used to enable / disable FK for an articulation, if None then treat all as enabled
+    joint_q: wp.array(dtype=float),
+    joint_qd: wp.array(dtype=float),
+    joint_q_start: wp.array(dtype=int),
+    joint_qd_start: wp.array(dtype=int),
+    joint_type: wp.array(dtype=int),
+    joint_parent: wp.array(dtype=int),
+    joint_child: wp.array(dtype=int),
+    joint_X_p: wp.array(dtype=wp.transform),
+    joint_X_c: wp.array(dtype=wp.transform),
+    joint_axis: wp.array(dtype=wp.vec3),
+    joint_axis_start: wp.array(dtype=int),
+    joint_axis_dim: wp.array(dtype=int, ndim=2),
+    body_com: wp.array(dtype=wp.vec3),
+    # outputs
+    body_q: wp.array(dtype=wp.transform),
+    body_qd: wp.array(dtype=wp.spatial_vector),
+):
+    tid = wp.tid()
+
+    # early out if disabling FK for this articulation
+    if articulation_mask:
+        if not articulation_mask[tid]:
+            return
+
+    joint_start = articulation_start[tid]
+    joint_end = articulation_start[tid + 1]
+
+    eval_single_articulation_fk(
+        joint_start,
+        joint_end,
+        joint_q,
+        joint_qd,
+        joint_q_start,
+        joint_qd_start,
+        joint_type,
+        joint_parent,
+        joint_child,
+        joint_X_p,
+        joint_X_c,
+        joint_axis,
+        joint_axis_start,
+        joint_axis_dim,
+        body_com,
+        # outputs
+        body_q,
+        body_qd,
+    )
+
+
+# updates state body information based on joint coordinates
+def eval_fk(model, joint_q, joint_qd, mask, state):
+    """
+    Evaluates the model's forward kinematics given the joint coordinates and updates the state's body information (:attr:`State.body_q` and :attr:`State.body_qd`).
+
+    Args:
+        model (Model): The model to evaluate.
+        joint_q (array): Generalized joint position coordinates, shape [joint_coord_count], float
+        joint_qd (array): Generalized joint velocity coordinates, shape [joint_dof_count], float
+        mask (array): The mask to use to enable / disable FK for an articulation. If None then treat all as enabled, shape [articulation_count], int/bool
+        state (State): The state to update.
+    """
+    wp.launch(
+        kernel=eval_articulation_fk,
+        dim=model.articulation_count,
+        inputs=[
+            model.articulation_start,
+            mask,
+            joint_q,
+            joint_qd,
+            model.joint_q_start,
+            model.joint_qd_start,
+            model.joint_type,
+            model.joint_parent,
+            model.joint_child,
+            model.joint_X_p,
+            model.joint_X_c,
+            model.joint_axis,
+            model.joint_axis_start,
+            model.joint_axis_dim,
+            model.body_com,
+        ],
+        outputs=[
+            state.body_q,
+            state.body_qd,
+        ],
+        device=model.device,
+    )
+
+
+@wp.func
+def reconstruct_angular_q_qd(q_pc: wp.quat, w_err: wp.vec3, X_wp: wp.transform, axis: wp.vec3):
+    """
+    Reconstructs the angular joint coordinates and velocities given the relative rotation and angular velocity
+    between a parent and child body.
+
+    Args:
+        q_pc (quat): The relative rotation between the parent and child body.
+        w_err (vec3): The angular velocity between the parent and child body.
+        X_wp (transform): The parent body's transform in world space.
+        axis (vec3): The joint axis in the frame of the parent body.
+
+    Returns:
+        q (float): The joint position coordinate.
+        qd (float): The joint velocity coordinate.
+    """
+    axis_p = wp.transform_vector(X_wp, axis)
+    twist = quat_twist(axis, q_pc)
+    q = wp.acos(twist[3]) * 2.0 * wp.sign(wp.dot(axis, wp.vec3(twist[0], twist[1], twist[2])))
+    qd = wp.dot(w_err, axis_p)
+    return q, qd
+
+
+@wp.kernel
+def eval_articulation_ik(
+    body_q: wp.array(dtype=wp.transform),
+    body_qd: wp.array(dtype=wp.spatial_vector),
+    body_com: wp.array(dtype=wp.vec3),
+    joint_type: wp.array(dtype=int),
+    joint_parent: wp.array(dtype=int),
+    joint_child: wp.array(dtype=int),
+    joint_X_p: wp.array(dtype=wp.transform),
+    joint_X_c: wp.array(dtype=wp.transform),
+    joint_axis: wp.array(dtype=wp.vec3),
+    joint_axis_start: wp.array(dtype=int),
+    joint_axis_dim: wp.array(dtype=int, ndim=2),
+    joint_q_start: wp.array(dtype=int),
+    joint_qd_start: wp.array(dtype=int),
+    joint_q: wp.array(dtype=float),
+    joint_qd: wp.array(dtype=float),
+):
+    tid = wp.tid()
+
+    parent = joint_parent[tid]
+    child = joint_child[tid]
+
+    X_pj = joint_X_p[tid]
+    X_cj = joint_X_c[tid]
+
+    w_p = wp.vec3()
+    v_p = wp.vec3()
+    v_wp = wp.spatial_vector()
+
+    # parent anchor frame in world space
+    X_wpj = X_pj
+    if parent >= 0:
+        X_wp = body_q[parent]
+        X_wpj = X_wp * X_pj
+        r_p = wp.transform_get_translation(X_wpj) - wp.transform_point(X_wp, body_com[parent])
+
+        v_wp = body_qd[parent]
+        w_p = wp.spatial_top(v_wp)
+        v_p = wp.spatial_bottom(v_wp) + wp.cross(w_p, r_p)
+
+    # child transform and moment arm
+    X_wc = body_q[child]
+    X_wcj = X_wc * X_cj
+
+    v_wc = body_qd[child]
+
+    w_c = wp.spatial_top(v_wc)
+    v_c = wp.spatial_bottom(v_wc)
+
+    # joint properties
+    type = joint_type[tid]
+
+    # compute position and orientation differences between anchor frames
+    x_p = wp.transform_get_translation(X_wpj)
+    x_c = wp.transform_get_translation(X_wcj)
+
+    q_p = wp.transform_get_rotation(X_wpj)
+    q_c = wp.transform_get_rotation(X_wcj)
+
+    x_err = x_c - x_p
+    v_err = v_c - v_p
+    w_err = w_c - w_p
+
+    q_start = joint_q_start[tid]
+    qd_start = joint_qd_start[tid]
+    axis_start = joint_axis_start[tid]
+    lin_axis_count = joint_axis_dim[tid, 0]
+    ang_axis_count = joint_axis_dim[tid, 1]
+
+    if type == wp.sim.JOINT_PRISMATIC:
+        axis = joint_axis[axis_start]
+
+        # world space joint axis
+        axis_p = wp.quat_rotate(q_p, axis)
+
+        # evaluate joint coordinates
+        q = wp.dot(x_err, axis_p)
+        qd = wp.dot(v_err, axis_p)
+
+        joint_q[q_start] = q
+        joint_qd[qd_start] = qd
+
+        return
+
+    if type == wp.sim.JOINT_REVOLUTE:
+        axis = joint_axis[axis_start]
+        q_pc = wp.quat_inverse(q_p) * q_c
+
+        q, qd = reconstruct_angular_q_qd(q_pc, w_err, X_wpj, axis)
+
+        joint_q[q_start] = q
+        joint_qd[qd_start] = qd
+
+        return
+
+    if type == wp.sim.JOINT_BALL:
+        q_pc = wp.quat_inverse(q_p) * q_c
+
+        joint_q[q_start + 0] = q_pc[0]
+        joint_q[q_start + 1] = q_pc[1]
+        joint_q[q_start + 2] = q_pc[2]
+        joint_q[q_start + 3] = q_pc[3]
+
+        ang_vel = wp.transform_vector(wp.transform_inverse(X_wpj), w_err)
+        joint_qd[qd_start + 0] = ang_vel[0]
+        joint_qd[qd_start + 1] = ang_vel[1]
+        joint_qd[qd_start + 2] = ang_vel[2]
+
+        return
+
+    if type == wp.sim.JOINT_FIXED:
+        return
+
+    if type == wp.sim.JOINT_FREE or type == wp.sim.JOINT_DISTANCE:
+        q_pc = wp.quat_inverse(q_p) * q_c
+
+        x_err_c = wp.quat_rotate_inv(q_p, x_err)
+        v_err_c = wp.quat_rotate_inv(q_p, v_err)
+        w_err_c = wp.quat_rotate_inv(q_p, w_err)
+
+        joint_q[q_start + 0] = x_err_c[0]
+        joint_q[q_start + 1] = x_err_c[1]
+        joint_q[q_start + 2] = x_err_c[2]
+
+        joint_q[q_start + 3] = q_pc[0]
+        joint_q[q_start + 4] = q_pc[1]
+        joint_q[q_start + 5] = q_pc[2]
+        joint_q[q_start + 6] = q_pc[3]
+
+        joint_qd[qd_start + 0] = w_err_c[0]
+        joint_qd[qd_start + 1] = w_err_c[1]
+        joint_qd[qd_start + 2] = w_err_c[2]
+
+        joint_qd[qd_start + 3] = v_err_c[0]
+        joint_qd[qd_start + 4] = v_err_c[1]
+        joint_qd[qd_start + 5] = v_err_c[2]
+
+        return
+
+    if type == wp.sim.JOINT_COMPOUND:
+        axis_0 = joint_axis[axis_start + 0]
+        axis_1 = joint_axis[axis_start + 1]
+        axis_2 = joint_axis[axis_start + 2]
+        qs, qds = invert_3d_rotational_dofs(axis_0, axis_1, axis_2, q_p, q_c, w_err)
+        joint_q[q_start + 0] = qs[0]
+        joint_q[q_start + 1] = qs[1]
+        joint_q[q_start + 2] = qs[2]
+        joint_qd[qd_start + 0] = qds[0]
+        joint_qd[qd_start + 1] = qds[1]
+        joint_qd[qd_start + 2] = qds[2]
+
+        return
+
+    if type == wp.sim.JOINT_UNIVERSAL:
+        axis_0 = joint_axis[axis_start + 0]
+        axis_1 = joint_axis[axis_start + 1]
+        qs2, qds2 = invert_2d_rotational_dofs(axis_0, axis_1, q_p, q_c, w_err)
+        joint_q[q_start + 0] = qs2[0]
+        joint_q[q_start + 1] = qs2[1]
+        joint_qd[qd_start + 0] = qds2[0]
+        joint_qd[qd_start + 1] = qds2[1]
+
+        return
+
+    if type == wp.sim.JOINT_D6:
+        x_err_c = wp.quat_rotate_inv(q_p, x_err)
+        v_err_c = wp.quat_rotate_inv(q_p, v_err)
+        if lin_axis_count > 0:
+            axis = joint_axis[axis_start + 0]
+            joint_q[q_start + 0] = wp.dot(x_err_c, axis)
+            joint_qd[qd_start + 0] = wp.dot(v_err_c, axis)
+
+        if lin_axis_count > 1:
+            axis = joint_axis[axis_start + 1]
+            joint_q[q_start + 1] = wp.dot(x_err_c, axis)
+            joint_qd[qd_start + 1] = wp.dot(v_err_c, axis)
+
+        if lin_axis_count > 2:
+            axis = joint_axis[axis_start + 2]
+            joint_q[q_start + 2] = wp.dot(x_err_c, axis)
+            joint_qd[qd_start + 2] = wp.dot(v_err_c, axis)
+
+        if ang_axis_count == 1:
+            axis = joint_axis[axis_start]
+            q_pc = wp.quat_inverse(q_p) * q_c
+            q, qd = reconstruct_angular_q_qd(q_pc, w_err, X_wpj, joint_axis[axis_start + lin_axis_count])
+            joint_q[q_start + lin_axis_count] = q
+            joint_qd[qd_start + lin_axis_count] = qd
+
+        if ang_axis_count == 2:
+            axis_0 = joint_axis[axis_start + lin_axis_count + 0]
+            axis_1 = joint_axis[axis_start + lin_axis_count + 1]
+            qs2, qds2 = invert_2d_rotational_dofs(axis_0, axis_1, q_p, q_c, w_err)
+            joint_q[q_start + lin_axis_count + 0] = qs2[0]
+            joint_q[q_start + lin_axis_count + 1] = qs2[1]
+            joint_qd[qd_start + lin_axis_count + 0] = qds2[0]
+            joint_qd[qd_start + lin_axis_count + 1] = qds2[1]
+
+        if ang_axis_count == 3:
+            axis_0 = joint_axis[axis_start + lin_axis_count + 0]
+            axis_1 = joint_axis[axis_start + lin_axis_count + 1]
+            axis_2 = joint_axis[axis_start + lin_axis_count + 2]
+            qs3, qds3 = invert_3d_rotational_dofs(axis_0, axis_1, axis_2, q_p, q_c, w_err)
+            joint_q[q_start + lin_axis_count + 0] = qs3[0]
+            joint_q[q_start + lin_axis_count + 1] = qs3[1]
+            joint_q[q_start + lin_axis_count + 2] = qs3[2]
+            joint_qd[qd_start + lin_axis_count + 0] = qds3[0]
+            joint_qd[qd_start + lin_axis_count + 1] = qds3[1]
+            joint_qd[qd_start + lin_axis_count + 2] = qds3[2]
+
+        return
+
+
+# given maximal coordinate model computes ik (closest point projection)
+def eval_ik(model, state, joint_q, joint_qd):
+    """
+    Evaluates the model's inverse kinematics given the state's body information (:attr:`State.body_q` and :attr:`State.body_qd`) and updates the generalized joint coordinates `joint_q` and `joint_qd`.
+
+    Args:
+        model (Model): The model to evaluate.
+        state (State): The state with the body's maximal coordinates (positions :attr:`State.body_q` and velocities :attr:`State.body_qd`) to use.
+        joint_q (array): Generalized joint position coordinates, shape [joint_coord_count], float
+        joint_qd (array): Generalized joint velocity coordinates, shape [joint_dof_count], float
+    """
+    wp.launch(
+        kernel=eval_articulation_ik,
+        dim=model.joint_count,
+        inputs=[
+            state.body_q,
+            state.body_qd,
+            model.body_com,
+            model.joint_type,
+            model.joint_parent,
+            model.joint_child,
+            model.joint_X_p,
+            model.joint_X_c,
+            model.joint_axis,
+            model.joint_axis_start,
+            model.joint_axis_dim,
+            model.joint_q_start,
+            model.joint_qd_start,
+        ],
+        outputs=[joint_q, joint_qd],
+        device=model.device,
+    )