visaljs 0.0.1 → 0.0.3

package/runtime/third_party/bearssl/src/hash/ghash_pwr8.c

@@ -1,411 +0,0 @@
-/*
- * Copyright (c) 2017 Thomas Pornin <pornin@bolet.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining 
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be 
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#define BR_POWER_ASM_MACROS   1
-#include "inner.h"
-
-/*
- * This is the GHASH implementation that leverages the POWER8 opcodes.
- */
-
-#if BR_POWER8
-
-/*
- * Some symbolic names for registers.
- *   HB0 = 16 bytes of value 0
- *   HB1 = 16 bytes of value 1
- *   HB2 = 16 bytes of value 2
- *   HB6 = 16 bytes of value 6
- *   HB7 = 16 bytes of value 7
- *   TT0, TT1 and TT2 are temporaries
- *
- * BSW holds the pattern for byteswapping 32-bit words; this is set only
- * on little-endian systems. XBSW is the same register with the +32 offset
- * for access with the VSX opcodes.
- */
-#define HB0     0
-#define HB1     1
-#define HB2     2
-#define HB6     3
-#define HB7     4
-#define TT0     5
-#define TT1     6
-#define TT2     7
-
-#define BSW     8
-#define XBSW   40
-
-/*
- * Macro to initialise the constants.
- */
-#define INIT \
-		vxor(HB0, HB0, HB0) \
-		vspltisb(HB1, 1) \
-		vspltisb(HB2, 2) \
-		vspltisb(HB6, 6) \
-		vspltisb(HB7, 7) \
-		INIT_BSW
-
-/*
- * Fix endianness of a value after reading it or before writing it, if
- * necessary.
- */
-#if BR_POWER8_LE
-#define INIT_BSW         lxvw4x(XBSW, 0, %[idx2be])
-#define FIX_ENDIAN(xx)   vperm(xx, xx, xx, BSW)
-#else
-#define INIT_BSW
-#define FIX_ENDIAN(xx)
-#endif
-
-/*
- * Left-shift x0:x1 by one bit to the left. This is a corrective action
- * needed because GHASH is defined in full little-endian specification,
- * while the opcodes use full big-endian convention, so the 255-bit product
- * ends up one bit to the right.
- */
-#define SL_256(x0, x1) \
-		vsldoi(TT0, HB0, x1, 1) \
-		vsl(x0, x0, HB1) \
-		vsr(TT0, TT0, HB7) \
-		vsl(x1, x1, HB1) \
-		vxor(x0, x0, TT0)
-
-/*
- * Reduce x0:x1 in GF(2^128), result in xd (register xd may be the same as
- * x0 or x1, or a different register). x0 and x1 are modified.
- */
-#define REDUCE_F128(xd, x0, x1) \
-		vxor(x0, x0, x1) \
-		vsr(TT0, x1, HB1) \
-		vsr(TT1, x1, HB2) \
-		vsr(TT2, x1, HB7) \
-		vxor(x0, x0, TT0) \
-		vxor(TT1, TT1, TT2) \
-		vxor(x0, x0, TT1) \
-		vsldoi(x1, x1, HB0, 15) \
-		vsl(TT1, x1, HB6) \
-		vsl(TT2, x1, HB1) \
-		vxor(x1, TT1, TT2) \
-		vsr(TT0, x1, HB1) \
-		vsr(TT1, x1, HB2) \
-		vsr(TT2, x1, HB7) \
-		vxor(x0, x0, x1) \
-		vxor(x0, x0, TT0) \
-		vxor(TT1, TT1, TT2) \
-		vxor(xd, x0, TT1)
-
-/* see bearssl_hash.h */
-void
-br_ghash_pwr8(void *y, const void *h, const void *data, size_t len)
-{
-	const unsigned char *buf1, *buf2;
-	size_t num4, num1;
-	unsigned char tmp[64];
-	long cc0, cc1, cc2, cc3;
-
-#if BR_POWER8_LE
-	static const uint32_t idx2be[] = {
-		0x03020100, 0x07060504, 0x0B0A0908, 0x0F0E0D0C
-	};
-#endif
-
-	buf1 = data;
-
-	/*
-	 * Assembly code requires data into two chunks; first chunk
-	 * must contain a number of blocks which is a multiple of 4.
-	 * Since the processing for the first chunk is faster, we want
-	 * to make it as big as possible.
-	 *
-	 * For the remainder, there are two possibilities:
-	 *  -- if the remainder size is a multiple of 16, then use it
-	 *     in place;
-	 *  -- otherwise, copy it to the tmp[] array and pad it with
-	 *     zeros.
-	 */
-	num4 = len >> 6;
-	buf2 = buf1 + (num4 << 6);
-	len &= 63;
-	num1 = (len + 15) >> 4;
-	if ((len & 15) != 0) {
-		memcpy(tmp, buf2, len);
-		memset(tmp + len, 0, (num1 << 4) - len);
-		buf2 = tmp;
-	}
-
-	cc0 =  0;
-	cc1 = 16;
-	cc2 = 32;
-	cc3 = 48;
-	asm volatile (
-		INIT
-
-		/*
-		 * Load current h (denoted hereafter h1) in v9.
-		 */
-		lxvw4x(41, 0, %[h])
-		FIX_ENDIAN(9)
-
-		/*
-		 * Load current y into v28.
-		 */
-		lxvw4x(60, 0, %[y])
-		FIX_ENDIAN(28)
-
-		/*
-		 * Split h1 into three registers:
-		 *   v17 = h1_1:h1_0
-		 *   v18 =    0:h1_0
-		 *   v19 = h1_1:0
-		 */
-		xxpermdi(49, 41, 41, 2)
-		vsldoi(18, HB0, 9, 8)
-		vsldoi(19, 9, HB0, 8)
-
-		/*
-		 * If num4 is 0, skip directly to the second chunk.
-		 */
-		cmpldi(%[num4], 0)
-		beq(chunk1)
-
-		/*
-		 * Compute h2 = h*h in v10.
-		 */
-		vpmsumd(10, 18, 18)
-		vpmsumd(11, 19, 19)
-		SL_256(10, 11)
-		REDUCE_F128(10, 10, 11)
-
-		/*
-		 * Compute h3 = h*h*h in v11.
-		 * We first split h2 into:
-		 *   v10 = h2_0:h2_1
-		 *   v11 =    0:h2_0
-		 *   v12 = h2_1:0
-		 * Then we do the product with h1, and reduce into v11.
-		 */
-		vsldoi(11, HB0, 10, 8)
-		vsldoi(12, 10, HB0, 8)
-		vpmsumd(13, 10, 17)
-		vpmsumd(11, 11, 18)
-		vpmsumd(12, 12, 19)
-		vsldoi(14, HB0, 13, 8)
-		vsldoi(15, 13, HB0, 8)
-		vxor(11, 11, 14)
-		vxor(12, 12, 15)
-		SL_256(11, 12)
-		REDUCE_F128(11, 11, 12)
-
-		/*
-		 * Compute h4 = h*h*h*h in v12. This is done by squaring h2.
-		 */
-		vsldoi(12, HB0, 10, 8)
-		vsldoi(13, 10, HB0, 8)
-		vpmsumd(12, 12, 12)
-		vpmsumd(13, 13, 13)
-		SL_256(12, 13)
-		REDUCE_F128(12, 12, 13)
-
-		/*
-		 * Repack h1, h2, h3 and h4:
-		 *   v13 = h4_0:h3_0
-		 *   v14 = h4_1:h3_1
-		 *   v15 = h2_0:h1_0
-		 *   v16 = h2_1:h1_1
-		 */
-		xxpermdi(45, 44, 43, 0)
-		xxpermdi(46, 44, 43, 3)
-		xxpermdi(47, 42, 41, 0)
-		xxpermdi(48, 42, 41, 3)
-
-		/*
-		 * Loop for each group of four blocks.
-		 */
-		mtctr(%[num4])
-	label(loop4)
-		/*
-		 * Read the four next blocks.
-		 *   v20 = y + a0 = b0
-		 *   v21 = a1     = b1
-		 *   v22 = a2     = b2
-		 *   v23 = a3     = b3
-		 */
-		lxvw4x(52, %[cc0], %[buf1])
-		lxvw4x(53, %[cc1], %[buf1])
-		lxvw4x(54, %[cc2], %[buf1])
-		lxvw4x(55, %[cc3], %[buf1])
-		FIX_ENDIAN(20)
-		FIX_ENDIAN(21)
-		FIX_ENDIAN(22)
-		FIX_ENDIAN(23)
-		addi(%[buf1], %[buf1], 64)
-		vxor(20, 20, 28)
-
-		/*
-		 * Repack the blocks into v9, v10, v11 and v12.
-		 *   v9  = b0_0:b1_0
-		 *   v10 = b0_1:b1_1
-		 *   v11 = b2_0:b3_0
-		 *   v12 = b2_1:b3_1
-		 */
-		xxpermdi(41, 52, 53, 0)
-		xxpermdi(42, 52, 53, 3)
-		xxpermdi(43, 54, 55, 0)
-		xxpermdi(44, 54, 55, 3)
-
-		/*
-		 * Compute the products.
-		 *   v20 = b0_0*h4_0 + b1_0*h3_0
-		 *   v21 = b0_1*h4_0 + b1_1*h3_0
-		 *   v22 = b0_0*h4_1 + b1_0*h3_1
-		 *   v23 = b0_1*h4_1 + b1_1*h3_1
-		 *   v24 = b2_0*h2_0 + b3_0*h1_0
-		 *   v25 = b2_1*h2_0 + b3_1*h1_0
-		 *   v26 = b2_0*h2_1 + b3_0*h1_1
-		 *   v27 = b2_1*h2_1 + b3_1*h1_1
-		 */
-		vpmsumd(20, 13,  9)
-		vpmsumd(21, 13, 10)
-		vpmsumd(22, 14,  9)
-		vpmsumd(23, 14, 10)
-		vpmsumd(24, 15, 11)
-		vpmsumd(25, 15, 12)
-		vpmsumd(26, 16, 11)
-		vpmsumd(27, 16, 12)
-
-		/*
-		 * Sum products into a single 256-bit result in v11:v12.
-		 */
-		vxor(11, 20, 24)
-		vxor(12, 23, 27)
-		vxor( 9, 21, 22)
-		vxor(10, 25, 26)
-		vxor(20,  9, 10)
-		vsldoi( 9, HB0, 20, 8)
-		vsldoi(10, 20, HB0, 8)
-		vxor(11, 11, 9)
-		vxor(12, 12, 10)
-
-		/*
-		 * Fix and reduce in GF(2^128); this is the new y (in v28).
-		 */
-		SL_256(11, 12)
-		REDUCE_F128(28, 11, 12)
-
-		/*
-		 * Loop for next group of four blocks.
-		 */
-		bdnz(loop4)
-
-		/*
-		 * Process second chunk, one block at a time.
-		 */
-	label(chunk1)
-		cmpldi(%[num1], 0)
-		beq(done)
-
-		mtctr(%[num1])
-	label(loop1)
-		/*
-		 * Load next data block and XOR it into y.
-		 */
-		lxvw4x(41, 0, %[buf2])
-#if BR_POWER8_LE
-		FIX_ENDIAN(9)
-#endif
-		addi(%[buf2], %[buf2], 16)
-		vxor(9, 28, 9)
-
-		/*
-		 * Split y into doublewords:
-		 *   v9  = y_0:y_1
-		 *   v10 =   0:y_0
-		 *   v11 = y_1:0
-		 */
-		vsldoi(10, HB0, 9, 8)
-		vsldoi(11, 9, HB0, 8)
-
-		/*
-		 * Compute products with h:
-		 *   v12 = y_0 * h_0
-		 *   v13 = y_1 * h_1
-		 *   v14 = y_1 * h_0 + y_0 * h_1
-		 */
-		vpmsumd(14,  9, 17)
-		vpmsumd(12, 10, 18)
-		vpmsumd(13, 11, 19)
-
-		/*
-		 * Propagate v14 into v12:v13 to finalise product.
-		 */
-		vsldoi(10, HB0, 14, 8)
-		vsldoi(11, 14, HB0, 8)
-		vxor(12, 12, 10)
-		vxor(13, 13, 11)
-
-		/*
-		 * Fix result and reduce into v28 (next value for y).
-		 */
-		SL_256(12, 13)
-		REDUCE_F128(28, 12, 13)
-		bdnz(loop1)
-
-	label(done)
-		/*
-		 * Write back the new y.
-		 */
-		FIX_ENDIAN(28)
-		stxvw4x(60, 0, %[y])
-
-: [buf1] "+b" (buf1), [buf2] "+b" (buf2)
-: [y] "b" (y), [h] "b" (h), [num4] "b" (num4), [num1] "b" (num1),
-  [cc0] "b" (cc0), [cc1] "b" (cc1), [cc2] "b" (cc2), [cc3] "b" (cc3)
-#if BR_POWER8_LE
-	, [idx2be] "b" (idx2be)
-#endif
-: "v0", "v1", "v2", "v3", "v4", "v5", "v6", "v7", "v8", "v9",
-  "v10", "v11", "v12", "v13", "v14", "v15", "v16", "v17", "v18", "v19",
-  "v20", "v21", "v22", "v23", "v24", "v25", "v26", "v27", "v28", "v29",
-  "ctr", "memory"
-	);
-}
-
-/* see bearssl_hash.h */
-br_ghash
-br_ghash_pwr8_get(void)
-{
-	return &br_ghash_pwr8;
-}
-
-#else
-
-/* see bearssl_hash.h */
-br_ghash
-br_ghash_pwr8_get(void)
-{
-	return 0;
-}
-
-#endif

package/runtime/third_party/bearssl/src/hash/md5.c

@@ -1,208 +0,0 @@
-/*
- * Copyright (c) 2016 Thomas Pornin <pornin@bolet.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining 
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be 
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "inner.h"
-
-#define F(B, C, D)     ((((C) ^ (D)) & (B)) ^ (D))
-#define G(B, C, D)     ((((C) ^ (B)) & (D)) ^ (C))
-#define H(B, C, D)     ((B) ^ (C) ^ (D))
-#define I(B, C, D)     ((C) ^ ((B) | ~(D)))
-
-#define ROTL(x, n)    (((x) << (n)) | ((x) >> (32 - (n))))
-
-/* see inner.h */
-const uint32_t br_md5_IV[4] = {
-	0x67452301, 0xEFCDAB89, 0x98BADCFE, 0x10325476
-};
-
-static const uint32_t K[64] = {
-	0xD76AA478, 0xE8C7B756, 0x242070DB, 0xC1BDCEEE,
-	0xF57C0FAF, 0x4787C62A, 0xA8304613, 0xFD469501,
-	0x698098D8, 0x8B44F7AF, 0xFFFF5BB1, 0x895CD7BE,
-	0x6B901122, 0xFD987193, 0xA679438E, 0x49B40821,
-
-	0xF61E2562, 0xC040B340, 0x265E5A51, 0xE9B6C7AA,
-	0xD62F105D, 0x02441453, 0xD8A1E681, 0xE7D3FBC8,
-	0x21E1CDE6, 0xC33707D6, 0xF4D50D87, 0x455A14ED,
-	0xA9E3E905, 0xFCEFA3F8, 0x676F02D9, 0x8D2A4C8A,
-
-	0xFFFA3942, 0x8771F681, 0x6D9D6122, 0xFDE5380C,
-	0xA4BEEA44, 0x4BDECFA9, 0xF6BB4B60, 0xBEBFBC70,
-	0x289B7EC6, 0xEAA127FA, 0xD4EF3085, 0x04881D05,
-	0xD9D4D039, 0xE6DB99E5, 0x1FA27CF8, 0xC4AC5665,
-
-	0xF4292244, 0x432AFF97, 0xAB9423A7, 0xFC93A039,
-	0x655B59C3, 0x8F0CCC92, 0xFFEFF47D, 0x85845DD1,
-	0x6FA87E4F, 0xFE2CE6E0, 0xA3014314, 0x4E0811A1,
-	0xF7537E82, 0xBD3AF235, 0x2AD7D2BB, 0xEB86D391
-};
-
-static const unsigned char MP[48] = {
-	1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12,
-	5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2,
-	0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9
-};
-
-/* see inner.h */
-void
-br_md5_round(const unsigned char *buf, uint32_t *val)
-{
-	uint32_t m[16];
-	uint32_t a, b, c, d;
-	int i;
-
-	a = val[0];
-	b = val[1];
-	c = val[2];
-	d = val[3];
-	/* obsolete
-	for (i = 0; i < 16; i ++) {
-		m[i] = br_dec32le(buf + (i << 2));
-	}
-	*/
-	br_range_dec32le(m, 16, buf);
-
-	for (i = 0; i < 16; i += 4) {
-		a = b + ROTL(a + F(b, c, d) + m[i + 0] + K[i + 0],  7);
-		d = a + ROTL(d + F(a, b, c) + m[i + 1] + K[i + 1], 12);
-		c = d + ROTL(c + F(d, a, b) + m[i + 2] + K[i + 2], 17);
-		b = c + ROTL(b + F(c, d, a) + m[i + 3] + K[i + 3], 22);
-	}
-	for (i = 16; i < 32; i += 4) {
-		a = b + ROTL(a + G(b, c, d) + m[MP[i - 16]] + K[i + 0],  5);
-		d = a + ROTL(d + G(a, b, c) + m[MP[i - 15]] + K[i + 1],  9);
-		c = d + ROTL(c + G(d, a, b) + m[MP[i - 14]] + K[i + 2], 14);
-		b = c + ROTL(b + G(c, d, a) + m[MP[i - 13]] + K[i + 3], 20);
-	}
-	for (i = 32; i < 48; i += 4) {
-		a = b + ROTL(a + H(b, c, d) + m[MP[i - 16]] + K[i + 0],  4);
-		d = a + ROTL(d + H(a, b, c) + m[MP[i - 15]] + K[i + 1], 11);
-		c = d + ROTL(c + H(d, a, b) + m[MP[i - 14]] + K[i + 2], 16);
-		b = c + ROTL(b + H(c, d, a) + m[MP[i - 13]] + K[i + 3], 23);
-	}
-	for (i = 48; i < 64; i += 4) {
-		a = b + ROTL(a + I(b, c, d) + m[MP[i - 16]] + K[i + 0],  6);
-		d = a + ROTL(d + I(a, b, c) + m[MP[i - 15]] + K[i + 1], 10);
-		c = d + ROTL(c + I(d, a, b) + m[MP[i - 14]] + K[i + 2], 15);
-		b = c + ROTL(b + I(c, d, a) + m[MP[i - 13]] + K[i + 3], 21);
-	}
-
-	val[0] += a;
-	val[1] += b;
-	val[2] += c;
-	val[3] += d;
-}
-
-/* see bearssl.h */
-void
-br_md5_init(br_md5_context *cc)
-{
-	cc->vtable = &br_md5_vtable;
-	memcpy(cc->val, br_md5_IV, sizeof cc->val);
-	cc->count = 0;
-}
-
-/* see bearssl.h */
-void
-br_md5_update(br_md5_context *cc, const void *data, size_t len)
-{
-	const unsigned char *buf;
-	size_t ptr;
-
-	buf = data;
-	ptr = (size_t)cc->count & 63;
-	while (len > 0) {
-		size_t clen;
-
-		clen = 64 - ptr;
-		if (clen > len) {
-			clen = len;
-		}
-		memcpy(cc->buf + ptr, buf, clen);
-		ptr += clen;
-		buf += clen;
-		len -= clen;
-		cc->count += (uint64_t)clen;
-		if (ptr == 64) {
-			br_md5_round(cc->buf, cc->val);
-			ptr = 0;
-		}
-	}
-}
-
-/* see bearssl.h */
-void
-br_md5_out(const br_md5_context *cc, void *dst)
-{
-	unsigned char buf[64];
-	uint32_t val[4];
-	size_t ptr;
-
-	ptr = (size_t)cc->count & 63;
-	memcpy(buf, cc->buf, ptr);
-	memcpy(val, cc->val, sizeof val);
-	buf[ptr ++] = 0x80;
-	if (ptr > 56) {
-		memset(buf + ptr, 0, 64 - ptr);
-		br_md5_round(buf, val);
-		memset(buf, 0, 56);
-	} else {
-		memset(buf + ptr, 0, 56 - ptr);
-	}
-	br_enc64le(buf + 56, cc->count << 3);
-	br_md5_round(buf, val);
-	br_range_enc32le(dst, val, 4);
-}
-
-/* see bearssl.h */
-uint64_t
-br_md5_state(const br_md5_context *cc, void *dst)
-{
-	br_range_enc32le(dst, cc->val, 4);
-	return cc->count;
-}
-
-/* see bearssl.h */
-void
-br_md5_set_state(br_md5_context *cc, const void *stb, uint64_t count)
-{
-	br_range_dec32le(cc->val, 4, stb);
-	cc->count = count;
-}
-
-/* see bearssl.h */
-const br_hash_class br_md5_vtable = {
-	sizeof(br_md5_context),
-	BR_HASHDESC_ID(br_md5_ID)
-		| BR_HASHDESC_OUT(16)
-		| BR_HASHDESC_STATE(16)
-		| BR_HASHDESC_LBLEN(6)
-		| BR_HASHDESC_MD_PADDING,
-	(void (*)(const br_hash_class **))&br_md5_init,
-	(void (*)(const br_hash_class **, const void *, size_t))&br_md5_update,
-	(void (*)(const br_hash_class *const *, void *))&br_md5_out,
-	(uint64_t (*)(const br_hash_class *const *, void *))&br_md5_state,
-	(void (*)(const br_hash_class **, const void *, uint64_t))
-		&br_md5_set_state
-};