visaljs 0.0.1 → 0.0.3

package/runtime/third_party/boringssl/include/openssl/hpke.h

@@ -0,0 +1,456 @@
+// Copyright 2020 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_HPKE_H
+#define OPENSSL_HEADER_HPKE_H
+
+#include <openssl/aead.h>
+#include <openssl/base.h>  // IWYU pragma: export
+#include <openssl/curve25519.h>
+#include <openssl/digest.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// Hybrid Public Key Encryption.
+//
+// Hybrid Public Key Encryption (HPKE) enables a sender to encrypt messages to a
+// receiver with a public key.
+//
+// See RFC 9180.
+
+
+// Parameters.
+//
+// An HPKE context is parameterized by KEM, KDF, and AEAD algorithms,
+// represented by `EVP_HPKE_KEM`, `EVP_HPKE_KDF`, and `EVP_HPKE_AEAD` types,
+// respectively.
+
+// The following constants are KEM identifiers.
+#define EVP_HPKE_DHKEM_P256_HKDF_SHA256 0x0010
+#define EVP_HPKE_DHKEM_X25519_HKDF_SHA256 0x0020
+#define EVP_HPKE_XWING 0x647a
+#define EVP_HPKE_MLKEM768 0x0041
+#define EVP_HPKE_MLKEM1024 0x0042
+
+// The following functions are KEM algorithms which may be used with HPKE. Note
+// that, while some HPKE KEMs use KDFs internally, this is separate from the
+// `EVP_HPKE_KDF` selection.
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_hpke_x25519_hkdf_sha256(void);
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_hpke_p256_hkdf_sha256(void);
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_hpke_xwing(void);
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_hpke_mlkem768(void);
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_hpke_mlkem1024(void);
+
+// EVP_HPKE_KEM_id returns the HPKE KEM identifier for `kem`, which
+// will be one of the `EVP_HPKE_KEM_*` constants.
+OPENSSL_EXPORT uint16_t EVP_HPKE_KEM_id(const EVP_HPKE_KEM *kem);
+
+// EVP_HPKE_MAX_PUBLIC_KEY_LENGTH is the maximum length of an encoded public key
+// for all KEMs currently supported by this library.
+#define EVP_HPKE_MAX_PUBLIC_KEY_LENGTH 1568
+
+// EVP_HPKE_KEM_public_key_len returns the length of a public key for `kem`.
+// This value will be at most `EVP_HPKE_MAX_PUBLIC_KEY_LENGTH`.
+OPENSSL_EXPORT size_t EVP_HPKE_KEM_public_key_len(const EVP_HPKE_KEM *kem);
+
+// EVP_HPKE_MAX_PRIVATE_KEY_LENGTH is the maximum length of an encoded private
+// key for all KEMs currently supported by this library.
+#define EVP_HPKE_MAX_PRIVATE_KEY_LENGTH 64
+
+// EVP_HPKE_KEM_private_key_len returns the length of a private key for `kem`.
+// This value will be at most `EVP_HPKE_MAX_PRIVATE_KEY_LENGTH`.
+OPENSSL_EXPORT size_t EVP_HPKE_KEM_private_key_len(const EVP_HPKE_KEM *kem);
+
+// EVP_HPKE_MAX_ENC_LENGTH is the maximum length of "enc", the encapsulated
+// shared secret, for all KEMs currently supported by this library.
+#define EVP_HPKE_MAX_ENC_LENGTH 1568
+
+// EVP_HPKE_KEM_enc_len returns the length of the "enc", the encapsulated shared
+// secret, for `kem`. This value will be at most `EVP_HPKE_MAX_ENC_LENGTH`.
+OPENSSL_EXPORT size_t EVP_HPKE_KEM_enc_len(const EVP_HPKE_KEM *kem);
+
+// EVP_HPKE_KEM_shared_secret_len returns the length of the shared secret
+// produced by `kem`.
+OPENSSL_EXPORT size_t EVP_HPKE_KEM_shared_secret_len(const EVP_HPKE_KEM *kem);
+
+// The following constants are KDF identifiers.
+#define EVP_HPKE_HKDF_SHA256 0x0001
+#define EVP_HPKE_HKDF_SHA384 0x0002
+
+// The following functions are KDF algorithms which may be used with HPKE. If
+// unsure, use `EVP_hpke_hkdf_sha256`.
+OPENSSL_EXPORT const EVP_HPKE_KDF *EVP_hpke_hkdf_sha256(void);
+OPENSSL_EXPORT const EVP_HPKE_KDF *EVP_hpke_hkdf_sha384(void);
+
+// EVP_HPKE_KDF_id returns the HPKE KDF identifier for `kdf`.
+OPENSSL_EXPORT uint16_t EVP_HPKE_KDF_id(const EVP_HPKE_KDF *kdf);
+
+// EVP_HPKE_KDF_hkdf_md returns the HKDF hash function corresponding to `kdf`,
+// or NULL if `kdf` is not an HKDF-based KDF. All currently supported KDFs are
+// HKDF-based.
+OPENSSL_EXPORT const EVP_MD *EVP_HPKE_KDF_hkdf_md(const EVP_HPKE_KDF *kdf);
+
+// The following constants are AEAD identifiers.
+#define EVP_HPKE_AES_128_GCM 0x0001
+#define EVP_HPKE_AES_256_GCM 0x0002
+#define EVP_HPKE_CHACHA20_POLY1305 0x0003
+
+// The following functions are AEAD algorithms which may be used with HPKE.
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_hpke_aes_128_gcm(void);
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_hpke_aes_256_gcm(void);
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_hpke_chacha20_poly1305(void);
+
+// EVP_HPKE_AEAD_id returns the HPKE AEAD identifier for `aead`.
+OPENSSL_EXPORT uint16_t EVP_HPKE_AEAD_id(const EVP_HPKE_AEAD *aead);
+
+// EVP_HPKE_AEAD_aead returns the `EVP_AEAD` corresponding to `aead`.
+OPENSSL_EXPORT const EVP_AEAD *EVP_HPKE_AEAD_aead(const EVP_HPKE_AEAD *aead);
+
+
+// Recipient keys.
+//
+// An HPKE recipient maintains a long-term KEM key. This library represents keys
+// with the `EVP_HPKE_KEY` type.
+
+// EVP_HPKE_KEY_zero sets an uninitialized `EVP_HPKE_KEY` to the zero state. The
+// caller should then use `EVP_HPKE_KEY_init`, `EVP_HPKE_KEY_copy`, or
+// `EVP_HPKE_KEY_generate` to finish initializing `key`.
+//
+// It is safe, but not necessary to call `EVP_HPKE_KEY_cleanup` in this state.
+// This may be used for more uniform cleanup of `EVP_HPKE_KEY`.
+OPENSSL_EXPORT void EVP_HPKE_KEY_zero(EVP_HPKE_KEY *key);
+
+// EVP_HPKE_KEY_cleanup releases memory referenced by `key`.
+OPENSSL_EXPORT void EVP_HPKE_KEY_cleanup(EVP_HPKE_KEY *key);
+
+// EVP_HPKE_KEY_new returns a newly-allocated `EVP_HPKE_KEY`, or NULL on error.
+// The caller must call `EVP_HPKE_KEY_free` on the result to release it.
+//
+// This is a convenience function for callers that need a heap-allocated
+// `EVP_HPKE_KEY`.
+OPENSSL_EXPORT EVP_HPKE_KEY *EVP_HPKE_KEY_new(void);
+
+// EVP_HPKE_KEY_free releases memory associated with `key`, which must have been
+// created with `EVP_HPKE_KEY_new`.
+OPENSSL_EXPORT void EVP_HPKE_KEY_free(EVP_HPKE_KEY *key);
+
+// EVP_HPKE_KEY_copy sets `dst` to a copy of `src`. It returns one on success
+// and zero on error. On success, the caller must call `EVP_HPKE_KEY_cleanup` to
+// release `dst`. On failure, calling `EVP_HPKE_KEY_cleanup` is safe, but not
+// necessary.
+OPENSSL_EXPORT int EVP_HPKE_KEY_copy(EVP_HPKE_KEY *dst,
+                                     const EVP_HPKE_KEY *src);
+
+// EVP_HPKE_KEY_move sets `out`, which must be initialized or in the zero state,
+// to the key in `in`. `in` is mutated and left in the zero state.
+OPENSSL_EXPORT void EVP_HPKE_KEY_move(EVP_HPKE_KEY *out, EVP_HPKE_KEY *in);
+
+// EVP_HPKE_KEY_init decodes `priv_key` as a private key for `kem` and
+// initializes `key` with the result. It returns one on success and zero if
+// `priv_key` was invalid. On success, the caller must call
+// `EVP_HPKE_KEY_cleanup` to release the key. On failure, calling
+// `EVP_HPKE_KEY_cleanup` is safe, but not necessary.
+OPENSSL_EXPORT int EVP_HPKE_KEY_init(EVP_HPKE_KEY *key, const EVP_HPKE_KEM *kem,
+                                     const uint8_t *priv_key,
+                                     size_t priv_key_len);
+
+// EVP_HPKE_KEY_generate sets `key` to a newly-generated key using `kem`.
+OPENSSL_EXPORT int EVP_HPKE_KEY_generate(EVP_HPKE_KEY *key,
+                                         const EVP_HPKE_KEM *kem);
+
+// EVP_HPKE_KEY_derive deterministically derives a key from `ikm` for use with
+// `kem` and initializes `key` with the result. It returns one on success and
+// zero on error. This corresponds to the DeriveKeyPair operation in RFC 9180.
+OPENSSL_EXPORT int EVP_HPKE_KEY_derive(EVP_HPKE_KEY *key,
+                                       const EVP_HPKE_KEM *kem,
+                                       const uint8_t *ikm, size_t ikm_len);
+
+// EVP_HPKE_KEY_kem returns the HPKE KEM used by `key`.
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_HPKE_KEY_kem(const EVP_HPKE_KEY *key);
+
+// EVP_HPKE_KEY_public_key writes `key`'s public key to `out` and sets
+// `*out_len` to the number of bytes written. On success, it returns one and
+// writes at most `max_out` bytes. If `max_out` is too small, it returns zero.
+// Setting `max_out` to `EVP_HPKE_MAX_PUBLIC_KEY_LENGTH` will ensure the public
+// key fits. An exact size can also be determined by
+// `EVP_HPKE_KEM_public_key_len`.
+OPENSSL_EXPORT int EVP_HPKE_KEY_public_key(const EVP_HPKE_KEY *key,
+                                           uint8_t *out, size_t *out_len,
+                                           size_t max_out);
+
+// EVP_HPKE_KEY_private_key writes `key`'s private key to `out` and sets
+// `*out_len` to the number of bytes written. On success, it returns one and
+// writes at most `max_out` bytes. If `max_out` is too small, it returns zero.
+// Setting `max_out` to `EVP_HPKE_MAX_PRIVATE_KEY_LENGTH` will ensure the
+// private key fits. An exact size can also be determined by
+// `EVP_HPKE_KEM_private_key_len`.
+OPENSSL_EXPORT int EVP_HPKE_KEY_private_key(const EVP_HPKE_KEY *key,
+                                            uint8_t *out, size_t *out_len,
+                                            size_t max_out);
+
+
+// Encryption contexts.
+//
+// An HPKE encryption context is represented by the `EVP_HPKE_CTX` type.
+
+// EVP_HPKE_CTX_zero sets an uninitialized `EVP_HPKE_CTX` to the zero state. The
+// caller should then use one of the `EVP_HPKE_CTX_setup_*` functions to finish
+// setting up `ctx`.
+//
+// It is safe, but not necessary to call `EVP_HPKE_CTX_cleanup` in this state.
+// This may be used for more uniform cleanup of `EVP_HPKE_CTX`.
+OPENSSL_EXPORT void EVP_HPKE_CTX_zero(EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_cleanup releases memory referenced by `ctx`. `ctx` must have
+// been initialized with `EVP_HPKE_CTX_zero` or one of the
+// `EVP_HPKE_CTX_setup_*` functions.
+OPENSSL_EXPORT void EVP_HPKE_CTX_cleanup(EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_new returns a newly-allocated `EVP_HPKE_CTX`, or NULL on error.
+// The caller must call `EVP_HPKE_CTX_free` on the result to release it.
+//
+// This is a convenience function for callers that need a heap-allocated
+// `EVP_HPKE_CTX`.
+OPENSSL_EXPORT EVP_HPKE_CTX *EVP_HPKE_CTX_new(void);
+
+// EVP_HPKE_CTX_free releases memory associated with `ctx`, which must have been
+// created with `EVP_HPKE_CTX_new`.
+OPENSSL_EXPORT void EVP_HPKE_CTX_free(EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_setup_sender implements the SetupBaseS HPKE operation. It
+// encapsulates a shared secret for `peer_public_key` and sets up `ctx` as a
+// sender context. It writes the encapsulated shared secret to `out_enc` and
+// sets `*out_enc_len` to the number of bytes written. It writes at most
+// `max_enc` bytes and fails if the buffer is too small. Setting `max_enc` to at
+// least `EVP_HPKE_MAX_ENC_LENGTH` will ensure the buffer is large enough. An
+// exact size may also be determined by `EVP_HPKE_KEM_enc_len`.
+//
+// This function returns one on success and zero on error. Note that
+// `peer_public_key` may be invalid, in which case this function will return an
+// error.
+//
+// On success, callers may call `EVP_HPKE_CTX_seal` to encrypt messages for the
+// recipient. Callers must then call `EVP_HPKE_CTX_cleanup` when done. On
+// failure, calling `EVP_HPKE_CTX_cleanup` is safe, but not required.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_sender(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEM *kem, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len);
+
+// EVP_HPKE_CTX_setup_sender_with_seed_for_testing behaves like
+// `EVP_HPKE_CTX_setup_sender`, but takes a seed to behave deterministically.
+// The seed's format depends on `kem`. For X25519, it is the sender's
+// ephemeral private key. For P256, it's an HKDF input.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_sender_with_seed_for_testing(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEM *kem, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len, const uint8_t *seed, size_t seed_len);
+
+// EVP_HPKE_CTX_setup_recipient implements the SetupBaseR HPKE operation. It
+// decapsulates the shared secret in `enc` with `key` and sets up `ctx` as a
+// recipient context. It returns one on success and zero on failure. Note that
+// `enc` may be invalid, in which case this function will return an error.
+//
+// On success, callers may call `EVP_HPKE_CTX_open` to decrypt messages from the
+// sender. Callers must then call `EVP_HPKE_CTX_cleanup` when done. On failure,
+// calling `EVP_HPKE_CTX_cleanup` is safe, but not required.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_recipient(
+    EVP_HPKE_CTX *ctx, const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf,
+    const EVP_HPKE_AEAD *aead, const uint8_t *enc, size_t enc_len,
+    const uint8_t *info, size_t info_len);
+
+// EVP_HPKE_CTX_setup_recipient_with_shared_secret behaves like
+// `EVP_HPKE_CTX_setup_recipient`, but takes the shared secret explicitly.
+//
+// WARNING: `shared_secret` must be the result of decapsulating the sender's
+// `enc` value with the recipient's private key. Using the wrong shared secret
+// will result in an `EVP_HPKE_CTX` that cannot decrypt the sender's messages.
+// Additionally, an attacker with knowledge of `shared_secret` will be able to
+// decrypt and forge encrypted messages.
+//
+// It returns one on success and zero on error.
+//
+// On success, callers may call `EVP_HPKE_CTX_open` to decrypt messages from the
+// sender. Callers must then call `EVP_HPKE_CTX_cleanup` when done. On failure,
+// calling `EVP_HPKE_CTX_cleanup` is safe, but not required.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_recipient_with_shared_secret(
+    EVP_HPKE_CTX *ctx, const EVP_HPKE_KEM *kem, const EVP_HPKE_KDF *kdf,
+    const EVP_HPKE_AEAD *aead, const uint8_t *shared_secret,
+    size_t shared_secret_len, const uint8_t *info, size_t info_len);
+
+// EVP_HPKE_CTX_setup_auth_sender implements the SetupAuthS HPKE operation. It
+// behaves like `EVP_HPKE_CTX_setup_sender` but authenticates the resulting
+// context with `key`.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_auth_sender(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len);
+
+// EVP_HPKE_CTX_setup_auth_sender_with_seed_for_testing behaves like
+// `EVP_HPKE_CTX_setup_auth_sender`, but takes a seed to behave
+// deterministically. The seed's format depends on `kem`. For X25519, it is the
+// sender's ephemeral private key. For P256, it's an HKDF input.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_auth_sender_with_seed_for_testing(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len, const uint8_t *seed, size_t seed_len);
+
+// EVP_HPKE_CTX_setup_auth_recipient implements the SetupAuthR HPKE operation.
+// It behaves like `EVP_HPKE_CTX_setup_recipient` but checks the resulting
+// context was authenticated with `peer_public_key`.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_auth_recipient(
+    EVP_HPKE_CTX *ctx, const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf,
+    const EVP_HPKE_AEAD *aead, const uint8_t *enc, size_t enc_len,
+    const uint8_t *info, size_t info_len, const uint8_t *peer_public_key,
+    size_t peer_public_key_len);
+
+
+// Using an HPKE context.
+//
+// Once set up, callers may encrypt or decrypt with an `EVP_HPKE_CTX` using the
+// following functions.
+
+// EVP_HPKE_CTX_open uses the HPKE context `ctx` to authenticate `in_len` bytes
+// from `in` and `ad_len` bytes from `ad` and to decrypt at most `in_len` bytes
+// into `out`. It returns one on success, and zero otherwise.
+//
+// This operation will fail if the `ctx` context is not set up as a receiver.
+//
+// Note that HPKE encryption is stateful and ordered. The sender's first call to
+// `EVP_HPKE_CTX_seal` must correspond to the recipient's first call to
+// `EVP_HPKE_CTX_open`, etc.
+//
+// At most `in_len` bytes are written to `out`. In order to ensure success,
+// `max_out_len` should be at least `in_len`. On successful return, `*out_len`
+// is set to the actual number of bytes written.
+OPENSSL_EXPORT int EVP_HPKE_CTX_open(EVP_HPKE_CTX *ctx, uint8_t *out,
+                                     size_t *out_len, size_t max_out_len,
+                                     const uint8_t *in, size_t in_len,
+                                     const uint8_t *ad, size_t ad_len);
+
+// EVP_HPKE_CTX_seal uses the HPKE context `ctx` to encrypt and authenticate
+// `in_len` bytes of ciphertext `in` and authenticate `ad_len` bytes from `ad`,
+// writing the result to `out`. It returns one on success and zero otherwise.
+//
+// This operation will fail if the `ctx` context is not set up as a sender.
+//
+// Note that HPKE encryption is stateful and ordered. The sender's first call to
+// `EVP_HPKE_CTX_seal` must correspond to the recipient's first call to
+// `EVP_HPKE_CTX_open`, etc.
+//
+// At most, `max_out_len` encrypted bytes are written to `out`. On successful
+// return, `*out_len` is set to the actual number of bytes written.
+//
+// To ensure success, `max_out_len` should be `in_len` plus the result of
+// `EVP_HPKE_CTX_max_overhead` or `EVP_HPKE_MAX_OVERHEAD`.
+OPENSSL_EXPORT int EVP_HPKE_CTX_seal(EVP_HPKE_CTX *ctx, uint8_t *out,
+                                     size_t *out_len, size_t max_out_len,
+                                     const uint8_t *in, size_t in_len,
+                                     const uint8_t *ad, size_t ad_len);
+
+// EVP_HPKE_CTX_export uses the HPKE context `ctx` to export a secret of
+// `secret_len` bytes into `out`. This function uses `context_len` bytes from
+// `context` as a context string for the secret. This is necessary to separate
+// different uses of exported secrets and bind relevant caller-specific context
+// into the output. It returns one on success and zero otherwise.
+OPENSSL_EXPORT int EVP_HPKE_CTX_export(const EVP_HPKE_CTX *ctx, uint8_t *out,
+                                       size_t secret_len,
+                                       const uint8_t *context,
+                                       size_t context_len);
+
+// EVP_HPKE_MAX_OVERHEAD contains the largest value that
+// `EVP_HPKE_CTX_max_overhead` would ever return for any context.
+#define EVP_HPKE_MAX_OVERHEAD EVP_AEAD_MAX_OVERHEAD
+
+// EVP_HPKE_CTX_max_overhead returns the maximum number of additional bytes
+// added by sealing data with `EVP_HPKE_CTX_seal`. The `ctx` context must be set
+// up as a sender.
+OPENSSL_EXPORT size_t EVP_HPKE_CTX_max_overhead(const EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_kem returns `ctx`'s configured KEM, or NULL if the context has
+// not been set up.
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_HPKE_CTX_kem(const EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_aead returns `ctx`'s configured AEAD, or NULL if the context has
+// not been set up.
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_HPKE_CTX_aead(const EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_kdf returns `ctx`'s configured KDF, or NULL if the context has
+// not been set up.
+OPENSSL_EXPORT const EVP_HPKE_KDF *EVP_HPKE_CTX_kdf(const EVP_HPKE_CTX *ctx);
+
+
+// Private structures.
+//
+// The following structures are exported so their types are stack-allocatable,
+// but accessing or modifying their fields is forbidden.
+
+struct evp_hpke_ctx_st {
+  const EVP_HPKE_KEM *kem;
+  const EVP_HPKE_AEAD *aead;
+  const EVP_HPKE_KDF *kdf;
+  EVP_AEAD_CTX aead_ctx;
+  uint8_t base_nonce[EVP_AEAD_MAX_NONCE_LENGTH];
+  uint8_t exporter_secret[EVP_MAX_MD_SIZE];
+  uint64_t seq;
+  int is_sender;
+};
+
+struct evp_hpke_key_st {
+  const EVP_HPKE_KEM *kem;
+  uint8_t private_key[EVP_HPKE_MAX_PRIVATE_KEY_LENGTH];
+  uint8_t public_key[EVP_HPKE_MAX_PUBLIC_KEY_LENGTH];
+
+  // `pkey`, if non-null, takes precedence over `private_key` and `public_key`,
+  // which are left unused. Otherwise `private_key` and `public_key` are used
+  // instead.
+  // TODO(crbug.com/535883377): Unify EVP_HPKE_KEM and EVP_KEM for all supported
+  // HPKE KEMs.
+  EVP_PKEY *pkey;
+};
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#if !defined(BORINGSSL_NO_CXX)
+extern "C++" {
+
+BSSL_NAMESPACE_BEGIN
+
+BORINGSSL_MAKE_STACK_TRAITS(EVP_HPKE_CTX, EVP_HPKE_CTX_zero,
+                            EVP_HPKE_CTX_cleanup)
+using ScopedEVP_HPKE_CTX = internal::StackAllocated<EVP_HPKE_CTX>;
+
+BORINGSSL_MAKE_STACK_TRAITS_MOVABLE(EVP_HPKE_KEY, EVP_HPKE_KEY_zero,
+                                    EVP_HPKE_KEY_cleanup, EVP_HPKE_KEY_move)
+using ScopedEVP_HPKE_KEY = internal::StackAllocatedMovable<EVP_HPKE_KEY>;
+
+BORINGSSL_MAKE_DELETER(EVP_HPKE_CTX, EVP_HPKE_CTX_free)
+BORINGSSL_MAKE_DELETER(EVP_HPKE_KEY, EVP_HPKE_KEY_free)
+
+BSSL_NAMESPACE_END
+
+}  // extern C++
+#endif
+
+#endif  // OPENSSL_HEADER_HPKE_H

package/runtime/third_party/boringssl/include/openssl/hrss.h

@@ -0,0 +1,108 @@
+// Copyright 2018 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_HRSS_H
+#define OPENSSL_HEADER_HRSS_H
+
+#include <openssl/base.h>   // IWYU pragma: export
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+// HRSS
+//
+// HRSS is a structured-lattice-based post-quantum key encapsulation mechanism.
+// The best exposition is https://eprint.iacr.org/2017/667.pdf although this
+// implementation uses a different KEM construction based on
+// https://eprint.iacr.org/2017/1005.pdf.
+//
+// This module is a remnant of early post-quantum KEM deployments. It should not
+// be used in any new applications. Use ML-KEM instead.
+//
+// TODO(crbug.com/503068543): Remove this.
+
+
+struct HRSS_private_key {
+  uint8_t opaque[1808];
+};
+
+struct HRSS_public_key {
+  uint8_t opaque[1424];
+};
+
+// HRSS_SAMPLE_BYTES is the number of bytes of entropy needed to generate a
+// short vector. There are 701 coefficients, but the final one is always set to
+// zero when sampling. Otherwise, we need one byte of input per coefficient.
+#define HRSS_SAMPLE_BYTES (701 - 1)
+// HRSS_GENERATE_KEY_BYTES is the number of bytes of entropy needed to generate
+// an HRSS key pair.
+#define HRSS_GENERATE_KEY_BYTES (HRSS_SAMPLE_BYTES + HRSS_SAMPLE_BYTES + 32)
+// HRSS_ENCAP_BYTES is the number of bytes of entropy needed to encapsulate a
+// session key.
+#define HRSS_ENCAP_BYTES (HRSS_SAMPLE_BYTES + HRSS_SAMPLE_BYTES)
+// HRSS_PUBLIC_KEY_BYTES is the number of bytes in a public key.
+#define HRSS_PUBLIC_KEY_BYTES 1138
+// HRSS_CIPHERTEXT_BYTES is the number of bytes in a ciphertext.
+#define HRSS_CIPHERTEXT_BYTES 1138
+// HRSS_KEY_BYTES is the number of bytes in a shared key.
+#define HRSS_KEY_BYTES 32
+// HRSS_POLY3_BYTES is the number of bytes needed to serialise a mod 3
+// polynomial.
+#define HRSS_POLY3_BYTES 140
+#define HRSS_PRIVATE_KEY_BYTES \
+  (HRSS_POLY3_BYTES * 2 + HRSS_PUBLIC_KEY_BYTES + 2 + 32)
+
+// HRSS_generate_key is a deterministic function that outputs a public and
+// private key based on the given entropy. It returns one on success or zero
+// on malloc failure.
+OPENSSL_EXPORT int HRSS_generate_key(
+    struct HRSS_public_key *out_pub, struct HRSS_private_key *out_priv,
+    const uint8_t input[HRSS_GENERATE_KEY_BYTES]);
+
+// HRSS_encap is a deterministic function the generates and encrypts a random
+// session key from the given entropy, writing those values to `out_shared_key`
+// and `out_ciphertext`, respectively. It returns one on success or zero on
+// malloc failure.
+OPENSSL_EXPORT int HRSS_encap(uint8_t out_ciphertext[HRSS_CIPHERTEXT_BYTES],
+                              uint8_t out_shared_key[HRSS_KEY_BYTES],
+                              const struct HRSS_public_key *in_pub,
+                              const uint8_t in[HRSS_ENCAP_BYTES]);
+
+// HRSS_decap decrypts a session key from `ciphertext_len` bytes of
+// `ciphertext`. If the ciphertext is valid, the decrypted key is written to
+// `out_shared_key`. Otherwise the HMAC of `ciphertext` under a secret key (kept
+// in `in_priv`) is written. If the ciphertext is the wrong length then it will
+// leak which was done via side-channels. Otherwise it should perform either
+// action in constant-time. It returns one on success (whether the ciphertext
+// was valid or not) and zero on malloc failure.
+OPENSSL_EXPORT int HRSS_decap(uint8_t out_shared_key[HRSS_KEY_BYTES],
+                              const struct HRSS_private_key *in_priv,
+                              const uint8_t *ciphertext, size_t ciphertext_len);
+
+// HRSS_marshal_public_key serialises `in_pub` to `out`.
+OPENSSL_EXPORT void HRSS_marshal_public_key(
+    uint8_t out[HRSS_PUBLIC_KEY_BYTES], const struct HRSS_public_key *in_pub);
+
+// HRSS_parse_public_key sets `*out` to the public-key encoded in `in`. It
+// returns true on success and zero on error.
+OPENSSL_EXPORT int HRSS_parse_public_key(
+    struct HRSS_public_key *out, const uint8_t in[HRSS_PUBLIC_KEY_BYTES]);
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#endif  // OPENSSL_HEADER_HRSS_H

package/runtime/third_party/boringssl/include/openssl/is_boringssl.h

@@ -0,0 +1,16 @@
+// Copyright 2017 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// This header is provided in order to catch include path errors in consuming
+// BoringSSL.

package/runtime/third_party/boringssl/include/openssl/kdf.h

@@ -0,0 +1,92 @@
+// Copyright 2022 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_KDF_H
+#define OPENSSL_HEADER_KDF_H
+
+#include <openssl/base.h>   // IWYU pragma: export
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// KDF support for EVP.
+
+
+// HKDF-specific functions.
+//
+// The following functions are provided for OpenSSL compatibility. Prefer the
+// HKDF functions in <openssl/hkdf.h>. In each, `ctx` must be created with
+// `EVP_PKEY_CTX_new_id` with `EVP_PKEY_HKDF` and then initialized with
+// `EVP_PKEY_derive_init`.
+
+// EVP_PKEY_HKDEF_MODE_* define "modes" for use with `EVP_PKEY_CTX_hkdf_mode`.
+// The misspelling of "HKDF" as "HKDEF" is intentional for OpenSSL
+// compatibility.
+#define EVP_PKEY_HKDEF_MODE_EXTRACT_AND_EXPAND 0
+#define EVP_PKEY_HKDEF_MODE_EXTRACT_ONLY 1
+#define EVP_PKEY_HKDEF_MODE_EXPAND_ONLY 2
+
+// EVP_PKEY_CTX_hkdf_mode configures which HKDF operation to run. It returns one
+// on success and zero on error. `mode` must be one of `EVP_PKEY_HKDEF_MODE_*`.
+// By default, the mode is `EVP_PKEY_HKDEF_MODE_EXTRACT_AND_EXPAND`.
+//
+// If `mode` is `EVP_PKEY_HKDEF_MODE_EXTRACT_AND_EXPAND` or
+// `EVP_PKEY_HKDEF_MODE_EXPAND_ONLY`, the output is variable-length.
+// `EVP_PKEY_derive` uses the size of the output buffer as the output length for
+// HKDF-Expand.
+//
+// WARNING: Although this API calls it a "mode", HKDF-Extract and HKDF-Expand
+// are distinct operations with distinct inputs and distinct kinds of keys.
+// Callers should not pass input secrets for one operation into the other.
+OPENSSL_EXPORT int EVP_PKEY_CTX_hkdf_mode(EVP_PKEY_CTX *ctx, int mode);
+
+// EVP_PKEY_CTX_set_hkdf_md sets `md` as the digest to use with HKDF. It returns
+// one on success and zero on error.
+OPENSSL_EXPORT int EVP_PKEY_CTX_set_hkdf_md(EVP_PKEY_CTX *ctx,
+                                            const EVP_MD *md);
+
+// EVP_PKEY_CTX_set1_hkdf_key configures HKDF to use `key_len` bytes from `key`
+// as the "key", described below. It returns one on success and zero on error.
+//
+// Which input is the key depends on the "mode" (see `EVP_PKEY_CTX_hkdf_mode`).
+// If `EVP_PKEY_HKDEF_MODE_EXTRACT_AND_EXPAND` or
+// `EVP_PKEY_HKDEF_MODE_EXTRACT_ONLY`, this function specifies the input keying
+// material (IKM) for HKDF-Extract. If `EVP_PKEY_HKDEF_MODE_EXPAND_ONLY`, it
+// instead specifies the pseudorandom key (PRK) for HKDF-Expand.
+OPENSSL_EXPORT int EVP_PKEY_CTX_set1_hkdf_key(EVP_PKEY_CTX *ctx,
+                                              const uint8_t *key,
+                                              size_t key_len);
+
+// EVP_PKEY_CTX_set1_hkdf_salt configures HKDF to use `salt_len` bytes from
+// `salt` as the salt parameter to HKDF-Extract. It returns one on success and
+// zero on error. If performing HKDF-Expand only, this parameter is ignored.
+OPENSSL_EXPORT int EVP_PKEY_CTX_set1_hkdf_salt(EVP_PKEY_CTX *ctx,
+                                               const uint8_t *salt,
+                                               size_t salt_len);
+
+// EVP_PKEY_CTX_add1_hkdf_info appends `info_len` bytes from `info` to the info
+// parameter used with HKDF-Expand. It returns one on success and zero on error.
+// If performing HKDF-Extract only, this parameter is ignored.
+OPENSSL_EXPORT int EVP_PKEY_CTX_add1_hkdf_info(EVP_PKEY_CTX *ctx,
+                                               const uint8_t *info,
+                                               size_t info_len);
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#endif  // OPENSSL_HEADER_KDF_H