visaljs 0.0.1 → 0.0.3

package/runtime/third_party/bearssl/src/ec/ec_prime_i31.c

@@ -1,826 +0,0 @@
-/*
- * Copyright (c) 2016 Thomas Pornin <pornin@bolet.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining 
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be 
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "inner.h"
-
-/*
- * Parameters for supported curves (field modulus, and 'b' equation
- * parameter; both values use the 'i31' format, and 'b' is in Montgomery
- * representation).
- */
-
-static const uint32_t P256_P[] = {
-	0x00000108,
-	0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF, 0x00000007,
-	0x00000000, 0x00000000, 0x00000040, 0x7FFFFF80,
-	0x000000FF
-};
-
-static const uint32_t P256_R2[] = {
-	0x00000108,
-	0x00014000, 0x00018000, 0x00000000, 0x7FF40000,
-	0x7FEFFFFF, 0x7FF7FFFF, 0x7FAFFFFF, 0x005FFFFF,
-	0x00000000
-};
-
-static const uint32_t P256_B[] = {
-	0x00000108,
-	0x6FEE1803, 0x6229C4BD, 0x21B139BE, 0x327150AA,
-	0x3567802E, 0x3F7212ED, 0x012E4355, 0x782DD38D,
-	0x0000000E
-};
-
-static const uint32_t P384_P[] = {
-	0x0000018C,
-	0x7FFFFFFF, 0x00000001, 0x00000000, 0x7FFFFFF8,
-	0x7FFFFFEF, 0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF,
-	0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF,
-	0x00000FFF
-};
-
-static const uint32_t P384_R2[] = {
-	0x0000018C,
-	0x00000000, 0x00000080, 0x7FFFFE00, 0x000001FF,
-	0x00000800, 0x00000000, 0x7FFFE000, 0x00001FFF,
-	0x00008000, 0x00008000, 0x00000000, 0x00000000,
-	0x00000000
-};
-
-static const uint32_t P384_B[] = {
-	0x0000018C,
-	0x6E666840, 0x070D0392, 0x5D810231, 0x7651D50C,
-	0x17E218D6, 0x1B192002, 0x44EFE441, 0x3A524E2B,
-	0x2719BA5F, 0x41F02209, 0x36C5643E, 0x5813EFFE,
-	0x000008A5
-};
-
-static const uint32_t P521_P[] = {
-	0x00000219,
-	0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF,
-	0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF,
-	0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF,
-	0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF, 0x7FFFFFFF,
-	0x01FFFFFF
-};
-
-static const uint32_t P521_R2[] = {
-	0x00000219,
-	0x00001000, 0x00000000, 0x00000000, 0x00000000,
-	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x00000000
-};
-
-static const uint32_t P521_B[] = {
-	0x00000219,
-	0x540FC00A, 0x228FEA35, 0x2C34F1EF, 0x67BF107A,
-	0x46FC1CD5, 0x1605E9DD, 0x6937B165, 0x272A3D8F,
-	0x42785586, 0x44C8C778, 0x15F3B8B4, 0x64B73366,
-	0x03BA8B69, 0x0D05B42A, 0x21F929A2, 0x2C31C393,
-	0x00654FAE
-};
-
-typedef struct {
-	const uint32_t *p;
-	const uint32_t *b;
-	const uint32_t *R2;
-	uint32_t p0i;
-	size_t point_len;
-} curve_params;
-
-static inline const curve_params *
-id_to_curve(int curve)
-{
-	static const curve_params pp[] = {
-		{ P256_P, P256_B, P256_R2, 0x00000001,  65 },
-		{ P384_P, P384_B, P384_R2, 0x00000001,  97 },
-		{ P521_P, P521_B, P521_R2, 0x00000001, 133 }
-	};
-
-	return &pp[curve - BR_EC_secp256r1];
-}
-
-#define I31_LEN   ((BR_MAX_EC_SIZE + 61) / 31)
-
-/*
- * Type for a point in Jacobian coordinates:
- * -- three values, x, y and z, in Montgomery representation
- * -- affine coordinates are X = x / z^2 and Y = y / z^3
- * -- for the point at infinity, z = 0
- */
-typedef struct {
-	uint32_t c[3][I31_LEN];
-} jacobian;
-
-/*
- * We use a custom interpreter that uses a dozen registers, and
- * only six operations:
- *    MSET(d, a)       copy a into d
- *    MADD(d, a)       d = d+a (modular)
- *    MSUB(d, a)       d = d-a (modular)
- *    MMUL(d, a, b)    d = a*b (Montgomery multiplication)
- *    MINV(d, a, b)    invert d modulo p; a and b are used as scratch registers
- *    MTZ(d)           clear return value if d = 0
- * Destination of MMUL (d) must be distinct from operands (a and b).
- * There is no such constraint for MSUB and MADD.
- *
- * Registers include the operand coordinates, and temporaries.
- */
-#define MSET(d, a)      (0x0000 + ((d) << 8) + ((a) << 4))
-#define MADD(d, a)      (0x1000 + ((d) << 8) + ((a) << 4))
-#define MSUB(d, a)      (0x2000 + ((d) << 8) + ((a) << 4))
-#define MMUL(d, a, b)   (0x3000 + ((d) << 8) + ((a) << 4) + (b))
-#define MINV(d, a, b)   (0x4000 + ((d) << 8) + ((a) << 4) + (b))
-#define MTZ(d)          (0x5000 + ((d) << 8))
-#define ENDCODE         0
-
-/*
- * Registers for the input operands.
- */
-#define P1x    0
-#define P1y    1
-#define P1z    2
-#define P2x    3
-#define P2y    4
-#define P2z    5
-
-/*
- * Alternate names for the first input operand.
- */
-#define Px     0
-#define Py     1
-#define Pz     2
-
-/*
- * Temporaries.
- */
-#define t1     6
-#define t2     7
-#define t3     8
-#define t4     9
-#define t5    10
-#define t6    11
-#define t7    12
-
-/*
- * Extra scratch registers available when there is no second operand (e.g.
- * for "double" and "affine").
- */
-#define t8     3
-#define t9     4
-#define t10    5
-
-/*
- * Doubling formulas are:
- *
- *   s = 4*x*y^2
- *   m = 3*(x + z^2)*(x - z^2)
- *   x' = m^2 - 2*s
- *   y' = m*(s - x') - 8*y^4
- *   z' = 2*y*z
- *
- * If y = 0 (P has order 2) then this yields infinity (z' = 0), as it
- * should. This case should not happen anyway, because our curves have
- * prime order, and thus do not contain any point of order 2.
- *
- * If P is infinity (z = 0), then again the formulas yield infinity,
- * which is correct. Thus, this code works for all points.
- *
- * Cost: 8 multiplications
- */
-static const uint16_t code_double[] = {
-	/*
-	 * Compute z^2 (in t1).
-	 */
-	MMUL(t1, Pz, Pz),
-
-	/*
-	 * Compute x-z^2 (in t2) and then x+z^2 (in t1).
-	 */
-	MSET(t2, Px),
-	MSUB(t2, t1),
-	MADD(t1, Px),
-
-	/*
-	 * Compute m = 3*(x+z^2)*(x-z^2) (in t1).
-	 */
-	MMUL(t3, t1, t2),
-	MSET(t1, t3),
-	MADD(t1, t3),
-	MADD(t1, t3),
-
-	/*
-	 * Compute s = 4*x*y^2 (in t2) and 2*y^2 (in t3).
-	 */
-	MMUL(t3, Py, Py),
-	MADD(t3, t3),
-	MMUL(t2, Px, t3),
-	MADD(t2, t2),
-
-	/*
-	 * Compute x' = m^2 - 2*s.
-	 */
-	MMUL(Px, t1, t1),
-	MSUB(Px, t2),
-	MSUB(Px, t2),
-
-	/*
-	 * Compute z' = 2*y*z.
-	 */
-	MMUL(t4, Py, Pz),
-	MSET(Pz, t4),
-	MADD(Pz, t4),
-
-	/*
-	 * Compute y' = m*(s - x') - 8*y^4. Note that we already have
-	 * 2*y^2 in t3.
-	 */
-	MSUB(t2, Px),
-	MMUL(Py, t1, t2),
-	MMUL(t4, t3, t3),
-	MSUB(Py, t4),
-	MSUB(Py, t4),
-
-	ENDCODE
-};
-
-/*
- * Addtions formulas are:
- *
- *   u1 = x1 * z2^2
- *   u2 = x2 * z1^2
- *   s1 = y1 * z2^3
- *   s2 = y2 * z1^3
- *   h = u2 - u1
- *   r = s2 - s1
- *   x3 = r^2 - h^3 - 2 * u1 * h^2
- *   y3 = r * (u1 * h^2 - x3) - s1 * h^3
- *   z3 = h * z1 * z2
- *
- * If both P1 and P2 are infinity, then z1 == 0 and z2 == 0, implying that
- * z3 == 0, so the result is correct.
- * If either of P1 or P2 is infinity, but not both, then z3 == 0, which is
- * not correct.
- * h == 0 only if u1 == u2; this happens in two cases:
- * -- if s1 == s2 then P1 and/or P2 is infinity, or P1 == P2
- * -- if s1 != s2 then P1 + P2 == infinity (but neither P1 or P2 is infinity)
- *
- * Thus, the following situations are not handled correctly:
- * -- P1 = 0 and P2 != 0
- * -- P1 != 0 and P2 = 0
- * -- P1 = P2
- * All other cases are properly computed. However, even in "incorrect"
- * situations, the three coordinates still are properly formed field
- * elements.
- *
- * The returned flag is cleared if r == 0. This happens in the following
- * cases:
- * -- Both points are on the same horizontal line (same Y coordinate).
- * -- Both points are infinity.
- * -- One point is infinity and the other is on line Y = 0.
- * The third case cannot happen with our curves (there is no valid point
- * on line Y = 0 since that would be a point of order 2). If the two
- * source points are non-infinity, then remains only the case where the
- * two points are on the same horizontal line.
- *
- * This allows us to detect the "P1 == P2" case, assuming that P1 != 0 and
- * P2 != 0:
- * -- If the returned value is not the point at infinity, then it was properly
- * computed.
- * -- Otherwise, if the returned flag is 1, then P1+P2 = 0, and the result
- * is indeed the point at infinity.
- * -- Otherwise (result is infinity, flag is 0), then P1 = P2 and we should
- * use the 'double' code.
- *
- * Cost: 16 multiplications
- */
-static const uint16_t code_add[] = {
-	/*
-	 * Compute u1 = x1*z2^2 (in t1) and s1 = y1*z2^3 (in t3).
-	 */
-	MMUL(t3, P2z, P2z),
-	MMUL(t1, P1x, t3),
-	MMUL(t4, P2z, t3),
-	MMUL(t3, P1y, t4),
-
-	/*
-	 * Compute u2 = x2*z1^2 (in t2) and s2 = y2*z1^3 (in t4).
-	 */
-	MMUL(t4, P1z, P1z),
-	MMUL(t2, P2x, t4),
-	MMUL(t5, P1z, t4),
-	MMUL(t4, P2y, t5),
-
-	/*
-	 * Compute h = u2 - u1 (in t2) and r = s2 - s1 (in t4).
-	 */
-	MSUB(t2, t1),
-	MSUB(t4, t3),
-
-	/*
-	 * Report cases where r = 0 through the returned flag.
-	 */
-	MTZ(t4),
-
-	/*
-	 * Compute u1*h^2 (in t6) and h^3 (in t5).
-	 */
-	MMUL(t7, t2, t2),
-	MMUL(t6, t1, t7),
-	MMUL(t5, t7, t2),
-
-	/*
-	 * Compute x3 = r^2 - h^3 - 2*u1*h^2.
-	 * t1 and t7 can be used as scratch registers.
-	 */
-	MMUL(P1x, t4, t4),
-	MSUB(P1x, t5),
-	MSUB(P1x, t6),
-	MSUB(P1x, t6),
-
-	/*
-	 * Compute y3 = r*(u1*h^2 - x3) - s1*h^3.
-	 */
-	MSUB(t6, P1x),
-	MMUL(P1y, t4, t6),
-	MMUL(t1, t5, t3),
-	MSUB(P1y, t1),
-
-	/*
-	 * Compute z3 = h*z1*z2.
-	 */
-	MMUL(t1, P1z, P2z),
-	MMUL(P1z, t1, t2),
-
-	ENDCODE
-};
-
-/*
- * Check that the point is on the curve. This code snippet assumes the
- * following conventions:
- * -- Coordinates x and y have been freshly decoded in P1 (but not
- * converted to Montgomery coordinates yet).
- * -- P2x, P2y and P2z are set to, respectively, R^2, b*R and 1.
- */
-static const uint16_t code_check[] = {
-
-	/* Convert x and y to Montgomery representation. */
-	MMUL(t1, P1x, P2x),
-	MMUL(t2, P1y, P2x),
-	MSET(P1x, t1),
-	MSET(P1y, t2),
-
-	/* Compute x^3 in t1. */
-	MMUL(t2, P1x, P1x),
-	MMUL(t1, P1x, t2),
-
-	/* Subtract 3*x from t1. */
-	MSUB(t1, P1x),
-	MSUB(t1, P1x),
-	MSUB(t1, P1x),
-
-	/* Add b. */
-	MADD(t1, P2y),
-
-	/* Compute y^2 in t2. */
-	MMUL(t2, P1y, P1y),
-
-	/* Compare y^2 with x^3 - 3*x + b; they must match. */
-	MSUB(t1, t2),
-	MTZ(t1),
-
-	/* Set z to 1 (in Montgomery representation). */
-	MMUL(P1z, P2x, P2z),
-
-	ENDCODE
-};
-
-/*
- * Conversion back to affine coordinates. This code snippet assumes that
- * the z coordinate of P2 is set to 1 (not in Montgomery representation).
- */
-static const uint16_t code_affine[] = {
-
-	/* Save z*R in t1. */
-	MSET(t1, P1z),
-
-	/* Compute z^3 in t2. */
-	MMUL(t2, P1z, P1z),
-	MMUL(t3, P1z, t2),
-	MMUL(t2, t3, P2z),
-
-	/* Invert to (1/z^3) in t2. */
-	MINV(t2, t3, t4),
-
-	/* Compute y. */
-	MSET(t3, P1y),
-	MMUL(P1y, t2, t3),
-
-	/* Compute (1/z^2) in t3. */
-	MMUL(t3, t2, t1),
-
-	/* Compute x. */
-	MSET(t2, P1x),
-	MMUL(P1x, t2, t3),
-
-	ENDCODE
-};
-
-static uint32_t
-run_code(jacobian *P1, const jacobian *P2,
-	const curve_params *cc, const uint16_t *code)
-{
-	uint32_t r;
-	uint32_t t[13][I31_LEN];
-	size_t u;
-
-	r = 1;
-
-	/*
-	 * Copy the two operands in the dedicated registers.
-	 */
-	memcpy(t[P1x], P1->c, 3 * I31_LEN * sizeof(uint32_t));
-	memcpy(t[P2x], P2->c, 3 * I31_LEN * sizeof(uint32_t));
-
-	/*
-	 * Run formulas.
-	 */
-	for (u = 0;; u ++) {
-		unsigned op, d, a, b;
-
-		op = code[u];
-		if (op == 0) {
-			break;
-		}
-		d = (op >> 8) & 0x0F;
-		a = (op >> 4) & 0x0F;
-		b = op & 0x0F;
-		op >>= 12;
-		switch (op) {
-			uint32_t ctl;
-			size_t plen;
-			unsigned char tp[(BR_MAX_EC_SIZE + 7) >> 3];
-
-		case 0:
-			memcpy(t[d], t[a], I31_LEN * sizeof(uint32_t));
-			break;
-		case 1:
-			ctl = br_i31_add(t[d], t[a], 1);
-			ctl |= NOT(br_i31_sub(t[d], cc->p, 0));
-			br_i31_sub(t[d], cc->p, ctl);
-			break;
-		case 2:
-			br_i31_add(t[d], cc->p, br_i31_sub(t[d], t[a], 1));
-			break;
-		case 3:
-			br_i31_montymul(t[d], t[a], t[b], cc->p, cc->p0i);
-			break;
-		case 4:
-			plen = (cc->p[0] - (cc->p[0] >> 5) + 7) >> 3;
-			br_i31_encode(tp, plen, cc->p);
-			tp[plen - 1] -= 2;
-			br_i31_modpow(t[d], tp, plen,
-				cc->p, cc->p0i, t[a], t[b]);
-			break;
-		default:
-			r &= ~br_i31_iszero(t[d]);
-			break;
-		}
-	}
-
-	/*
-	 * Copy back result.
-	 */
-	memcpy(P1->c, t[P1x], 3 * I31_LEN * sizeof(uint32_t));
-	return r;
-}
-
-static void
-set_one(uint32_t *x, const uint32_t *p)
-{
-	size_t plen;
-
-	plen = (p[0] + 63) >> 5;
-	memset(x, 0, plen * sizeof *x);
-	x[0] = p[0];
-	x[1] = 0x00000001;
-}
-
-static void
-point_zero(jacobian *P, const curve_params *cc)
-{
-	memset(P, 0, sizeof *P);
-	P->c[0][0] = P->c[1][0] = P->c[2][0] = cc->p[0];
-}
-
-static inline void
-point_double(jacobian *P, const curve_params *cc)
-{
-	run_code(P, P, cc, code_double);
-}
-
-static inline uint32_t
-point_add(jacobian *P1, const jacobian *P2, const curve_params *cc)
-{
-	return run_code(P1, P2, cc, code_add);
-}
-
-static void
-point_mul(jacobian *P, const unsigned char *x, size_t xlen,
-	const curve_params *cc)
-{
-	/*
-	 * We do a simple double-and-add ladder with a 2-bit window
-	 * to make only one add every two doublings. We thus first
-	 * precompute 2P and 3P in some local buffers.
-	 *
-	 * We always perform two doublings and one addition; the
-	 * addition is with P, 2P and 3P and is done in a temporary
-	 * array.
-	 *
-	 * The addition code cannot handle cases where one of the
-	 * operands is infinity, which is the case at the start of the
-	 * ladder. We therefore need to maintain a flag that controls
-	 * this situation.
-	 */
-	uint32_t qz;
-	jacobian P2, P3, Q, T, U;
-
-	memcpy(&P2, P, sizeof P2);
-	point_double(&P2, cc);
-	memcpy(&P3, P, sizeof P3);
-	point_add(&P3, &P2, cc);
-
-	point_zero(&Q, cc);
-	qz = 1;
-	while (xlen -- > 0) {
-		int k;
-
-		for (k = 6; k >= 0; k -= 2) {
-			uint32_t bits;
-			uint32_t bnz;
-
-			point_double(&Q, cc);
-			point_double(&Q, cc);
-			memcpy(&T, P, sizeof T);
-			memcpy(&U, &Q, sizeof U);
-			bits = (*x >> k) & (uint32_t)3;
-			bnz = NEQ(bits, 0);
-			CCOPY(EQ(bits, 2), &T, &P2, sizeof T);
-			CCOPY(EQ(bits, 3), &T, &P3, sizeof T);
-			point_add(&U, &T, cc);
-			CCOPY(bnz & qz, &Q, &T, sizeof Q);
-			CCOPY(bnz & ~qz, &Q, &U, sizeof Q);
-			qz &= ~bnz;
-		}
-		x ++;
-	}
-	memcpy(P, &Q, sizeof Q);
-}
-
-/*
- * Decode point into Jacobian coordinates. This function does not support
- * the point at infinity. If the point is invalid then this returns 0, but
- * the coordinates are still set to properly formed field elements.
- */
-static uint32_t
-point_decode(jacobian *P, const void *src, size_t len, const curve_params *cc)
-{
-	/*
-	 * Points must use uncompressed format:
-	 * -- first byte is 0x04;
-	 * -- coordinates X and Y use unsigned big-endian, with the same
-	 *    length as the field modulus.
-	 *
-	 * We don't support hybrid format (uncompressed, but first byte
-	 * has value 0x06 or 0x07, depending on the least significant bit
-	 * of Y) because it is rather useless, and explicitly forbidden
-	 * by PKIX (RFC 5480, section 2.2).
-	 *
-	 * We don't support compressed format either, because it is not
-	 * much used in practice (there are or were patent-related
-	 * concerns about point compression, which explains the lack of
-	 * generalised support). Also, point compression support would
-	 * need a bit more code.
-	 */
-	const unsigned char *buf;
-	size_t plen, zlen;
-	uint32_t r;
-	jacobian Q;
-
-	buf = src;
-	point_zero(P, cc);
-	plen = (cc->p[0] - (cc->p[0] >> 5) + 7) >> 3;
-	if (len != 1 + (plen << 1)) {
-		return 0;
-	}
-	r = br_i31_decode_mod(P->c[0], buf + 1, plen, cc->p);
-	r &= br_i31_decode_mod(P->c[1], buf + 1 + plen, plen, cc->p);
-
-	/*
-	 * Check first byte.
-	 */
-	r &= EQ(buf[0], 0x04);
-	/* obsolete
-	r &= EQ(buf[0], 0x04) | (EQ(buf[0] & 0xFE, 0x06)
-		& ~(uint32_t)(buf[0] ^ buf[plen << 1]));
-	*/
-
-	/*
-	 * Convert coordinates and check that the point is valid.
-	 */
-	zlen = ((cc->p[0] + 63) >> 5) * sizeof(uint32_t);
-	memcpy(Q.c[0], cc->R2, zlen);
-	memcpy(Q.c[1], cc->b, zlen);
-	set_one(Q.c[2], cc->p);
-	r &= ~run_code(P, &Q, cc, code_check);
-	return r;
-}
-
-/*
- * Encode a point. This method assumes that the point is correct and is
- * not the point at infinity. Encoded size is always 1+2*plen, where
- * plen is the field modulus length, in bytes.
- */
-static void
-point_encode(void *dst, const jacobian *P, const curve_params *cc)
-{
-	unsigned char *buf;
-	uint32_t xbl;
-	size_t plen;
-	jacobian Q, T;
-
-	buf = dst;
-	xbl = cc->p[0];
-	xbl -= (xbl >> 5);
-	plen = (xbl + 7) >> 3;
-	buf[0] = 0x04;
-	memcpy(&Q, P, sizeof *P);
-	set_one(T.c[2], cc->p);
-	run_code(&Q, &T, cc, code_affine);
-	br_i31_encode(buf + 1, plen, Q.c[0]);
-	br_i31_encode(buf + 1 + plen, plen, Q.c[1]);
-}
-
-static const br_ec_curve_def *
-id_to_curve_def(int curve)
-{
-	switch (curve) {
-	case BR_EC_secp256r1:
-		return &br_secp256r1;
-	case BR_EC_secp384r1:
-		return &br_secp384r1;
-	case BR_EC_secp521r1:
-		return &br_secp521r1;
-	}
-	return NULL;
-}
-
-static const unsigned char *
-api_generator(int curve, size_t *len)
-{
-	const br_ec_curve_def *cd;
-
-	cd = id_to_curve_def(curve);
-	*len = cd->generator_len;
-	return cd->generator;
-}
-
-static const unsigned char *
-api_order(int curve, size_t *len)
-{
-	const br_ec_curve_def *cd;
-
-	cd = id_to_curve_def(curve);
-	*len = cd->order_len;
-	return cd->order;
-}
-
-static size_t
-api_xoff(int curve, size_t *len)
-{
-	api_generator(curve, len);
-	*len >>= 1;
-	return 1;
-}
-
-static uint32_t
-api_mul(unsigned char *G, size_t Glen,
-	const unsigned char *x, size_t xlen, int curve)
-{
-	uint32_t r;
-	const curve_params *cc;
-	jacobian P;
-
-	cc = id_to_curve(curve);
-	if (Glen != cc->point_len) {
-		return 0;
-	}
-	r = point_decode(&P, G, Glen, cc);
-	point_mul(&P, x, xlen, cc);
-	point_encode(G, &P, cc);
-	return r;
-}
-
-static size_t
-api_mulgen(unsigned char *R,
-	const unsigned char *x, size_t xlen, int curve)
-{
-	const unsigned char *G;
-	size_t Glen;
-
-	G = api_generator(curve, &Glen);
-	memcpy(R, G, Glen);
-	api_mul(R, Glen, x, xlen, curve);
-	return Glen;
-}
-
-static uint32_t
-api_muladd(unsigned char *A, const unsigned char *B, size_t len,
-	const unsigned char *x, size_t xlen,
-	const unsigned char *y, size_t ylen, int curve)
-{
-	uint32_t r, t, z;
-	const curve_params *cc;
-	jacobian P, Q;
-
-	/*
-	 * TODO: see about merging the two ladders. Right now, we do
-	 * two independent point multiplications, which is a bit
-	 * wasteful of CPU resources (but yields short code).
-	 */
-
-	cc = id_to_curve(curve);
-	if (len != cc->point_len) {
-		return 0;
-	}
-	r = point_decode(&P, A, len, cc);
-	if (B == NULL) {
-		size_t Glen;
-
-		B = api_generator(curve, &Glen);
-	}
-	r &= point_decode(&Q, B, len, cc);
-	point_mul(&P, x, xlen, cc);
-	point_mul(&Q, y, ylen, cc);
-
-	/*
-	 * We want to compute P+Q. Since the base points A and B are distinct
-	 * from infinity, and the multipliers are non-zero and lower than the
-	 * curve order, then we know that P and Q are non-infinity. This
-	 * leaves two special situations to test for:
-	 * -- If P = Q then we must use point_double().
-	 * -- If P+Q = 0 then we must report an error.
-	 */
-	t = point_add(&P, &Q, cc);
-	point_double(&Q, cc);
-	z = br_i31_iszero(P.c[2]);
-
-	/*
-	 * If z is 1 then either P+Q = 0 (t = 1) or P = Q (t = 0). So we
-	 * have the following:
-	 *
-	 *   z = 0, t = 0   return P (normal addition)
-	 *   z = 0, t = 1   return P (normal addition)
-	 *   z = 1, t = 0   return Q (a 'double' case)
-	 *   z = 1, t = 1   report an error (P+Q = 0)
-	 */
-	CCOPY(z & ~t, &P, &Q, sizeof Q);
-	point_encode(A, &P, cc);
-	r &= ~(z & t);
-
-	return r;
-}
-
-/* see bearssl_ec.h */
-const br_ec_impl br_ec_prime_i31 = {
-	(uint32_t)0x03800000,
-	&api_generator,
-	&api_order,
-	&api_xoff,
-	&api_mul,
-	&api_mulgen,
-	&api_muladd
-};