visaljs 0.0.1 → 0.0.3

package/runtime/third_party/boringssl/include/openssl/ec.h

@@ -0,0 +1,530 @@
+// Copyright 2000-2016 The OpenSSL Project Authors. All Rights Reserved.
+// Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_EC_H
+#define OPENSSL_HEADER_EC_H
+
+#include <openssl/base.h>  // IWYU pragma: export
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// Low-level operations on elliptic curves.
+
+
+// point_conversion_form_t enumerates forms, as defined in X9.62 (ECDSA), for
+// the encoding of an elliptic curve point (x,y)
+typedef enum {
+  // POINT_CONVERSION_COMPRESSED indicates that the point is encoded as z||x,
+  // where the octet z specifies which solution of the quadratic equation y
+  // is.
+  POINT_CONVERSION_COMPRESSED = 2,
+
+  // POINT_CONVERSION_UNCOMPRESSED indicates that the point is encoded as
+  // z||x||y, where z is the octet 0x04.
+  POINT_CONVERSION_UNCOMPRESSED = 4,
+
+  // POINT_CONVERSION_HYBRID indicates that the point is encoded as z||x||y,
+  // where z specifies which solution of the quadratic equation y is. This is
+  // not supported by the code and has never been observed in use.
+  //
+  // TODO(agl): remove once node.js no longer references this.
+  POINT_CONVERSION_HYBRID = 6,
+} point_conversion_form_t;
+
+
+// Elliptic curve groups.
+//
+// Elliptic curve groups are represented by `EC_GROUP` objects. Unlike OpenSSL,
+// if limited to the APIs in this section, callers may treat `EC_GROUP`s as
+// static, immutable objects which do not need to be copied or released. In
+// BoringSSL, only custom `EC_GROUP`s created by `EC_GROUP_new_curve_GFp`
+// (deprecated) are dynamic.
+//
+// Callers may cast away `const` and use `EC_GROUP_dup` and `EC_GROUP_free` with
+// static groups, for compatibility with OpenSSL or dynamic groups, but it is
+// otherwise unnecessary.
+
+// EC_group_p224 returns an `EC_GROUP` for P-224, also known as secp224r1.
+OPENSSL_EXPORT const EC_GROUP *EC_group_p224(void);
+
+// EC_group_p256 returns an `EC_GROUP` for P-256, also known as secp256r1 or
+// prime256v1.
+OPENSSL_EXPORT const EC_GROUP *EC_group_p256(void);
+
+// EC_group_p384 returns an `EC_GROUP` for P-384, also known as secp384r1.
+OPENSSL_EXPORT const EC_GROUP *EC_group_p384(void);
+
+// EC_group_p521 returns an `EC_GROUP` for P-521, also known as secp521r1.
+OPENSSL_EXPORT const EC_GROUP *EC_group_p521(void);
+
+// EC_GROUP_new_by_curve_name returns the `EC_GROUP` object for the elliptic
+// curve specified by `nid`, or NULL on unsupported NID.  For OpenSSL
+// compatibility, this function returns a non-const pointer which may be passed
+// to `EC_GROUP_free`. However, the resulting object is actually static and
+// calling `EC_GROUP_free` is optional.
+//
+// The supported NIDs are:
+// - `NID_secp224r1` (P-224)
+// - `NID_X9_62_prime256v1` (P-256)
+// - `NID_secp384r1` (P-384)
+// - `NID_secp521r1` (P-521)
+//
+// Calling this function causes all four curves to be linked into the binary.
+// Prefer calling `EC_group_*` to allow the static linker to drop unused curves.
+//
+// If in doubt, use `NID_X9_62_prime256v1`, or see the curve25519.h header for
+// more modern primitives.
+OPENSSL_EXPORT EC_GROUP *EC_GROUP_new_by_curve_name(int nid);
+
+// EC_GROUP_cmp returns zero if `a` and `b` are the same group and non-zero
+// otherwise.
+OPENSSL_EXPORT int EC_GROUP_cmp(const EC_GROUP *a, const EC_GROUP *b,
+                                BN_CTX *ignored);
+
+// EC_GROUP_get0_generator returns a pointer to the internal `EC_POINT` object
+// in `group` that specifies the generator for the group.
+OPENSSL_EXPORT const EC_POINT *EC_GROUP_get0_generator(const EC_GROUP *group);
+
+// EC_GROUP_get0_order returns a pointer to the internal `BIGNUM` object in
+// `group` that specifies the order of the group.
+OPENSSL_EXPORT const BIGNUM *EC_GROUP_get0_order(const EC_GROUP *group);
+
+// EC_GROUP_order_bits returns the number of bits of the order of `group`.
+OPENSSL_EXPORT int EC_GROUP_order_bits(const EC_GROUP *group);
+
+// EC_GROUP_get_cofactor sets `*cofactor` to the cofactor of `group`. It returns
+// one on success and zero otherwise. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_GROUP_get_cofactor(const EC_GROUP *group,
+                                         BIGNUM *cofactor, BN_CTX *ctx);
+
+// EC_GROUP_get_curve_GFp gets various parameters about a group. It sets
+// `*out_p` to the order of the coordinate field and `*out_a` and `*out_b` to
+// the parameters of the curve when expressed as y² = x³ + ax + b. Any of the
+// output parameters can be NULL. It returns one on success and zero on
+// error. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_GROUP_get_curve_GFp(const EC_GROUP *group, BIGNUM *out_p,
+                                          BIGNUM *out_a, BIGNUM *out_b,
+                                          BN_CTX *ctx);
+
+// EC_GROUP_get_curve_name returns a NID that identifies `group`.
+OPENSSL_EXPORT int EC_GROUP_get_curve_name(const EC_GROUP *group);
+
+// EC_GROUP_get_degree returns the number of bits needed to represent an
+// element of the field underlying `group`.
+OPENSSL_EXPORT unsigned EC_GROUP_get_degree(const EC_GROUP *group);
+
+// EC_curve_nid2nist returns the NIST name of the elliptic curve specified by
+// `nid`, or NULL if `nid` is not a NIST curve. For example, it returns "P-256"
+// for `NID_X9_62_prime256v1`.
+OPENSSL_EXPORT const char *EC_curve_nid2nist(int nid);
+
+// EC_curve_nist2nid returns the NID of the elliptic curve specified by the NIST
+// name `name`, or `NID_undef` if `name` is not a recognized name. For example,
+// it returns `NID_X9_62_prime256v1` for "P-256".
+OPENSSL_EXPORT int EC_curve_nist2nid(const char *name);
+
+
+// Points on elliptic curves.
+
+// EC_POINT_new returns a fresh `EC_POINT` object in the given group, or NULL
+// on error.
+OPENSSL_EXPORT EC_POINT *EC_POINT_new(const EC_GROUP *group);
+
+// EC_POINT_free frees `point` and the data that it points to.
+OPENSSL_EXPORT void EC_POINT_free(EC_POINT *point);
+
+// EC_POINT_copy sets `*dest` equal to `*src`. It returns one on success and
+// zero otherwise.
+OPENSSL_EXPORT int EC_POINT_copy(EC_POINT *dest, const EC_POINT *src);
+
+// EC_POINT_dup returns a fresh `EC_POINT` that contains the same values as
+// `src`, or NULL on error.
+OPENSSL_EXPORT EC_POINT *EC_POINT_dup(const EC_POINT *src,
+                                      const EC_GROUP *group);
+
+// EC_POINT_set_to_infinity sets `point` to be the "point at infinity" for the
+// given group.
+OPENSSL_EXPORT int EC_POINT_set_to_infinity(const EC_GROUP *group,
+                                            EC_POINT *point);
+
+// EC_POINT_is_at_infinity returns one iff `point` is the point at infinity and
+// zero otherwise.
+OPENSSL_EXPORT int EC_POINT_is_at_infinity(const EC_GROUP *group,
+                                           const EC_POINT *point);
+
+// EC_POINT_is_on_curve returns one if `point` is an element of `group` and
+// and zero otherwise or when an error occurs. This is different from OpenSSL,
+// which returns -1 on error. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_POINT_is_on_curve(const EC_GROUP *group,
+                                        const EC_POINT *point, BN_CTX *ctx);
+
+// EC_POINT_cmp returns zero if `a` is equal to `b`, greater than zero if
+// not equal and -1 on error. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_POINT_cmp(const EC_GROUP *group, const EC_POINT *a,
+                                const EC_POINT *b, BN_CTX *ctx);
+
+
+// Point conversion.
+
+// EC_POINT_get_affine_coordinates_GFp sets `x` and `y` to the affine value of
+// `point`. It returns one on success and zero otherwise. `ctx` is ignored and
+// may be NULL.
+//
+// Either `x` or `y` may be NULL to skip computing that coordinate. This is
+// slightly faster in the common case where only the x-coordinate is needed.
+OPENSSL_EXPORT int EC_POINT_get_affine_coordinates_GFp(const EC_GROUP *group,
+                                                       const EC_POINT *point,
+                                                       BIGNUM *x, BIGNUM *y,
+                                                       BN_CTX *ctx);
+
+// EC_POINT_get_affine_coordinates is an alias of
+// `EC_POINT_get_affine_coordinates_GFp`.
+OPENSSL_EXPORT int EC_POINT_get_affine_coordinates(const EC_GROUP *group,
+                                                   const EC_POINT *point,
+                                                   BIGNUM *x, BIGNUM *y,
+                                                   BN_CTX *ctx);
+
+// EC_POINT_set_affine_coordinates_GFp sets the value of `point` to be
+// (`x`, `y`). `ctx` is ignored and may be NULL. It returns one on success or
+// zero on error. It's considered an error if the point is not on the curve.
+//
+// Note that the corresponding function in OpenSSL versions prior to 1.0.2s does
+// not check if the point is on the curve. This is a security-critical check, so
+// code additionally supporting OpenSSL should repeat the check with
+// `EC_POINT_is_on_curve` or check for older OpenSSL versions with
+// `OPENSSL_VERSION_NUMBER`.
+OPENSSL_EXPORT int EC_POINT_set_affine_coordinates_GFp(const EC_GROUP *group,
+                                                       EC_POINT *point,
+                                                       const BIGNUM *x,
+                                                       const BIGNUM *y,
+                                                       BN_CTX *ctx);
+
+// EC_POINT_set_affine_coordinates is an alias of
+// `EC_POINT_set_affine_coordinates_GFp`.
+OPENSSL_EXPORT int EC_POINT_set_affine_coordinates(const EC_GROUP *group,
+                                                   EC_POINT *point,
+                                                   const BIGNUM *x,
+                                                   const BIGNUM *y,
+                                                   BN_CTX *ctx);
+
+// EC_POINT_point2oct serialises `point` into the X9.62 form given by `form`
+// into, at most, `max_out` bytes at `buf`. It returns the number of bytes
+// written or zero on error if `buf` is non-NULL, else the number of bytes
+// needed. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT size_t EC_POINT_point2oct(const EC_GROUP *group,
+                                         const EC_POINT *point,
+                                         point_conversion_form_t form,
+                                         uint8_t *buf, size_t max_out,
+                                         BN_CTX *ctx);
+
+// EC_POINT_point2buf serialises `point` into the X9.62 form given by `form` to
+// a newly-allocated buffer and sets `*out_buf` to point to it. It returns the
+// length of the result on success or zero on error. The caller must release
+// `*out_buf` with `OPENSSL_free` when done. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT size_t EC_POINT_point2buf(const EC_GROUP *group,
+                                         const EC_POINT *point,
+                                         point_conversion_form_t form,
+                                         uint8_t **out_buf, BN_CTX *ctx);
+
+// EC_POINT_point2cbb behaves like `EC_POINT_point2oct` but appends the
+// serialised point to `cbb`. It returns one on success and zero on error. `ctx`
+// is ignored and may be NULL.
+OPENSSL_EXPORT int EC_POINT_point2cbb(CBB *out, const EC_GROUP *group,
+                                      const EC_POINT *point,
+                                      point_conversion_form_t form,
+                                      BN_CTX *ctx);
+
+// EC_POINT_oct2point sets `point` from `len` bytes of X9.62 format
+// serialisation in `buf`. It returns one on success and zero on error. `ctx`
+// may be NULL. It's considered an error if `buf` does not represent a point on
+// the curve.
+OPENSSL_EXPORT int EC_POINT_oct2point(const EC_GROUP *group, EC_POINT *point,
+                                      const uint8_t *buf, size_t len,
+                                      BN_CTX *ctx);
+
+// EC_POINT_set_compressed_coordinates_GFp sets `point` to equal the point with
+// the given `x` coordinate and the y coordinate specified by `y_bit` (see
+// X9.62). It returns one on success and zero otherwise. `ctx` may be NULL.
+OPENSSL_EXPORT int EC_POINT_set_compressed_coordinates_GFp(
+    const EC_GROUP *group, EC_POINT *point, const BIGNUM *x, int y_bit,
+    BN_CTX *ctx);
+
+
+// Group operations.
+
+// EC_POINT_add sets `r` equal to `a` plus `b`. It returns one on success and
+// zero otherwise. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_POINT_add(const EC_GROUP *group, EC_POINT *r,
+                                const EC_POINT *a, const EC_POINT *b,
+                                BN_CTX *ctx);
+
+// EC_POINT_dbl sets `r` equal to `a` plus `a`. It returns one on success and
+// zero otherwise. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_POINT_dbl(const EC_GROUP *group, EC_POINT *r,
+                                const EC_POINT *a, BN_CTX *ctx);
+
+// EC_POINT_invert sets `a` equal to minus `a`. It returns one on success and
+// zero otherwise. `ctx` is ignored and may be NULL.
+OPENSSL_EXPORT int EC_POINT_invert(const EC_GROUP *group, EC_POINT *a,
+                                   BN_CTX *ctx);
+
+// EC_POINT_mul sets r = generator*n + q*m. It returns one on success and zero
+// otherwise. `ctx` may be NULL.
+OPENSSL_EXPORT int EC_POINT_mul(const EC_GROUP *group, EC_POINT *r,
+                                const BIGNUM *n, const EC_POINT *q,
+                                const BIGNUM *m, BN_CTX *ctx);
+
+
+// Hash-to-curve.
+//
+// The following functions implement primitives from RFC 9380. The `dst`
+// parameter in each function is the domain separation tag and must be unique
+// for each protocol and between the `hash_to_curve` and `hash_to_scalar`
+// variants. See section 3.1 of the spec for additional guidance on this
+// parameter.
+
+// EC_hash_to_curve_p256_xmd_sha256_sswu hashes `msg` to a point on `group` and
+// writes the result to `out`, implementing the P256_XMD:SHA-256_SSWU_RO_ suite
+// from RFC 9380. It returns one on success and zero on error.
+OPENSSL_EXPORT int EC_hash_to_curve_p256_xmd_sha256_sswu(
+    const EC_GROUP *group, EC_POINT *out, const uint8_t *dst, size_t dst_len,
+    const uint8_t *msg, size_t msg_len);
+
+// EC_hash_to_curve_p384_xmd_sha384_sswu hashes `msg` to a point on `group` and
+// writes the result to `out`, implementing the P384_XMD:SHA-384_SSWU_RO_ suite
+// from RFC 9380. It returns one on success and zero on error.
+OPENSSL_EXPORT int EC_hash_to_curve_p384_xmd_sha384_sswu(
+    const EC_GROUP *group, EC_POINT *out, const uint8_t *dst, size_t dst_len,
+    const uint8_t *msg, size_t msg_len);
+
+// EC_encode_to_curve_p256_xmd_sha256_sswu hashes `msg` to a point on `group`
+// and writes the result to `out`, implementing the P256_XMD:SHA-256_SSWU_NU_
+// suite from RFC 9380. It returns one on success and zero on error.
+//
+// This is a nonuniform encoding from byte strings to points in `group`. That
+// is, the set of possible outputs is only a fraction of the points in `group`,
+// and some points in this set are more likely to be output than others. See
+// also RFC 9380, section 10.4
+OPENSSL_EXPORT int EC_encode_to_curve_p256_xmd_sha256_sswu(
+    const EC_GROUP *group, EC_POINT *out, const uint8_t *dst, size_t dst_len,
+    const uint8_t *msg, size_t msg_len);
+
+// EC_encode_to_curve_p384_xmd_sha384_sswu hashes `msg` to a point on `group`
+// and writes the result to `out`, implementing the P384_XMD:SHA-384_SSWU_NU_
+// suite from RFC 9380. It returns one on success and zero on error.
+//
+// This is a nonuniform encoding from byte strings to points in `group`. That
+// is, the set of possible outputs is only a fraction of the points in `group`,
+// and some points in this set are more likely to be output than others. See
+// also RFC 9380, section 10.4
+OPENSSL_EXPORT int EC_encode_to_curve_p384_xmd_sha384_sswu(
+    const EC_GROUP *group, EC_POINT *out, const uint8_t *dst, size_t dst_len,
+    const uint8_t *msg, size_t msg_len);
+
+// EC_wpa3_sae_hash_to_curve_p256 hashes `salt` and `ikm` to a point on `group`
+// and writes the result to `out`, implementing the WPA3 SAE hash-to-curve
+// variant for P-256 defined in IEEE Std 802.11-2020, Section 12.4.4.2.3. It
+// returns one on success and zero on error. `salt` is the HKDF-Extract salt,
+// which is the SSID. `ikm` is the HKDF-Extract input, or password and
+// identifier concatenation.
+//
+// This generates the PT value. The PWE value still requires multiplication by
+// the hashed MAC addresses.
+OPENSSL_EXPORT int EC_wpa3_sae_hash_to_curve_p256(
+    const EC_GROUP *group, EC_POINT *out, const uint8_t *salt, size_t salt_len,
+    const uint8_t *ikm, size_t ikm_len);
+
+// EC_wpa3_sae_hunt_and_peck_p256 hashes `salt` and `password` to a point on
+// `group` and writes the result to `out`, using the WPA3 "hunt and peck"
+// algorithm defined in IEEE Std 802.11-2020, Section 12.4.4.2.2. It returns one
+// on success and zero on error. `group` must be P-256. `salt` is the
+// HKDF-Extract salt, which is the MAC concatenation. `password` is the
+// password, used to compute the HKDF-Extract input.
+//
+// Unlike a proper hash-to-curve construction, this algorithm is based on
+// rejection sampling and cannot run in time independent of `in`. To reduce
+// information leakage, the number of iterations is blinded up to
+// `min_iterations`. If at most `min_iterations` are needed to find a point,
+// only this fact is leaked. However, past `min_iterations`, the number of
+// iterations used may be leaked as a side channel.
+//
+// Each iteration has a roughly 50% probability of finding an output. For
+// example, a 64 iteration minimum reduces the chance of leak to 2^-64. However,
+// running time scales linearly with `min_iterations`.
+OPENSSL_EXPORT int EC_wpa3_sae_hunt_and_peck_p256(
+    const EC_GROUP *group, EC_POINT *out, const uint8_t *salt, size_t salt_len,
+    const uint8_t *password, size_t password_len, uint8_t min_iterations);
+
+
+// Deprecated functions.
+
+// EC_GROUP_free releases a reference to `group`, if `group` was created by
+// `EC_GROUP_new_curve_GFp`. If `group` is static, it does nothing.
+//
+// This function exists for OpenSSL compatibility, and to manage dynamic
+// `EC_GROUP`s constructed by `EC_GROUP_new_curve_GFp`. Callers that do not need
+// either may ignore this function.
+OPENSSL_EXPORT void EC_GROUP_free(EC_GROUP *group);
+
+// EC_GROUP_dup increments `group`'s reference count and returns it, if `group`
+// was created by `EC_GROUP_new_curve_GFp`. If `group` is static, it simply
+// returns `group`.
+//
+// This function exists for OpenSSL compatibility, and to manage dynamic
+// `EC_GROUP`s constructed by `EC_GROUP_new_curve_GFp`. Callers that do not need
+// either may ignore this function.
+OPENSSL_EXPORT EC_GROUP *EC_GROUP_dup(const EC_GROUP *group);
+
+// EC_GROUP_new_curve_GFp creates a new, arbitrary elliptic curve group based
+// on the equation y² = x³ + a·x + b. It returns the new group or NULL on
+// error. The lifetime of the resulting object must be managed with
+// `EC_GROUP_dup` and `EC_GROUP_free`.
+//
+// This new group has no generator. It is an error to use a generator-less group
+// with any functions except for `EC_GROUP_free`, `EC_POINT_new`,
+// `EC_POINT_set_affine_coordinates_GFp`, and `EC_GROUP_set_generator`.
+//
+// `EC_GROUP`s returned by this function will always compare as unequal via
+// `EC_GROUP_cmp` (even to themselves). `EC_GROUP_get_curve_name` will always
+// return `NID_undef`.
+//
+// This function is provided for compatibility with some legacy applications
+// only. Avoid using arbitrary curves and use `EC_GROUP_new_by_curve_name`
+// instead. This ensures the result meets preconditions necessary for
+// elliptic curve algorithms to function correctly and securely.
+//
+// Given invalid parameters, this function may fail or it may return an
+// `EC_GROUP` which breaks these preconditions. Subsequent operations may then
+// return arbitrary, incorrect values. Callers should not pass
+// attacker-controlled values to this function.
+OPENSSL_EXPORT EC_GROUP *EC_GROUP_new_curve_GFp(const BIGNUM *p,
+                                                const BIGNUM *a,
+                                                const BIGNUM *b, BN_CTX *ctx);
+
+// EC_GROUP_set_generator sets the generator for `group` to `generator`, which
+// must have the given order and cofactor. It may only be used with `EC_GROUP`
+// objects returned by `EC_GROUP_new_curve_GFp` and may only be used once on
+// each group. `generator` must have been created using `group`.
+OPENSSL_EXPORT int EC_GROUP_set_generator(EC_GROUP *group,
+                                          const EC_POINT *generator,
+                                          const BIGNUM *order,
+                                          const BIGNUM *cofactor);
+
+// EC_GROUP_get_order sets `*order` to the order of `group`, if it's not
+// NULL. It returns one on success and zero otherwise. `ctx` is ignored and may
+// be NULL. Use `EC_GROUP_get0_order` instead.
+OPENSSL_EXPORT int EC_GROUP_get_order(const EC_GROUP *group, BIGNUM *order,
+                                      BN_CTX *ctx);
+
+#define OPENSSL_EC_EXPLICIT_CURVE 0
+#define OPENSSL_EC_NAMED_CURVE 1
+
+// EC_GROUP_set_asn1_flag does nothing.
+OPENSSL_EXPORT void EC_GROUP_set_asn1_flag(EC_GROUP *group, int flag);
+
+// EC_GROUP_get_asn1_flag returns `OPENSSL_EC_NAMED_CURVE`.
+OPENSSL_EXPORT int EC_GROUP_get_asn1_flag(const EC_GROUP *group);
+
+typedef struct ec_method_st EC_METHOD;
+
+// EC_GROUP_method_of returns a dummy non-NULL pointer.
+OPENSSL_EXPORT const EC_METHOD *EC_GROUP_method_of(const EC_GROUP *group);
+
+// EC_METHOD_get_field_type returns NID_X9_62_prime_field.
+OPENSSL_EXPORT int EC_METHOD_get_field_type(const EC_METHOD *meth);
+
+// EC_GROUP_set_point_conversion_form aborts the process if `form` is not
+// `POINT_CONVERSION_UNCOMPRESSED` and otherwise does nothing.
+OPENSSL_EXPORT void EC_GROUP_set_point_conversion_form(
+    EC_GROUP *group, point_conversion_form_t form);
+
+// EC_builtin_curve describes a supported elliptic curve.
+typedef struct {
+  int nid;
+  const char *comment;
+} EC_builtin_curve;
+
+// EC_get_builtin_curves writes at most `max_num_curves` elements to
+// `out_curves` and returns the total number that it would have written, had
+// `max_num_curves` been large enough.
+//
+// The `EC_builtin_curve` items describe the supported elliptic curves.
+OPENSSL_EXPORT size_t EC_get_builtin_curves(EC_builtin_curve *out_curves,
+                                            size_t max_num_curves);
+
+// EC_POINT_clear_free calls `EC_POINT_free`.
+OPENSSL_EXPORT void EC_POINT_clear_free(EC_POINT *point);
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+// Old code expects to get EC_KEY from ec.h.
+#include <openssl/ec_key.h>
+
+#if defined(__cplusplus)
+extern "C++" {
+
+BSSL_NAMESPACE_BEGIN
+
+BORINGSSL_MAKE_DELETER(EC_POINT, EC_POINT_free)
+BORINGSSL_MAKE_DELETER(EC_GROUP, EC_GROUP_free)
+
+BSSL_NAMESPACE_END
+
+}  // extern C++
+
+#endif
+
+#define EC_R_BUFFER_TOO_SMALL 100
+#define EC_R_COORDINATES_OUT_OF_RANGE 101
+#define EC_R_D2I_ECPKPARAMETERS_FAILURE 102
+#define EC_R_EC_GROUP_NEW_BY_NAME_FAILURE 103
+#define EC_R_GROUP2PKPARAMETERS_FAILURE 104
+#define EC_R_I2D_ECPKPARAMETERS_FAILURE 105
+#define EC_R_INCOMPATIBLE_OBJECTS 106
+#define EC_R_INVALID_COMPRESSED_POINT 107
+#define EC_R_INVALID_COMPRESSION_BIT 108
+#define EC_R_INVALID_ENCODING 109
+#define EC_R_INVALID_FIELD 110
+#define EC_R_INVALID_FORM 111
+#define EC_R_INVALID_GROUP_ORDER 112
+#define EC_R_INVALID_PRIVATE_KEY 113
+#define EC_R_MISSING_PARAMETERS 114
+#define EC_R_MISSING_PRIVATE_KEY 115
+#define EC_R_NON_NAMED_CURVE 116
+#define EC_R_NOT_INITIALIZED 117
+#define EC_R_PKPARAMETERS2GROUP_FAILURE 118
+#define EC_R_POINT_AT_INFINITY 119
+#define EC_R_POINT_IS_NOT_ON_CURVE 120
+#define EC_R_SLOT_FULL 121
+#define EC_R_UNDEFINED_GENERATOR 122
+#define EC_R_UNKNOWN_GROUP 123
+#define EC_R_UNKNOWN_ORDER 124
+#define EC_R_WRONG_ORDER 125
+#define EC_R_BIGNUM_OUT_OF_RANGE 126
+#define EC_R_WRONG_CURVE_PARAMETERS 127
+#define EC_R_DECODE_ERROR 128
+#define EC_R_ENCODE_ERROR 129
+#define EC_R_GROUP_MISMATCH 130
+#define EC_R_INVALID_COFACTOR 131
+#define EC_R_PUBLIC_KEY_VALIDATION_FAILED 132
+#define EC_R_INVALID_SCALAR 133
+
+#endif  // OPENSSL_HEADER_EC_H