wasmtime 20.0.2 → 21.0.1

data/ext/cargo-vendor/wasmtime-20.0.2/src/config.rs

@@ -1,2695 +0,0 @@
-use anyhow::{bail, ensure, Result};
-use serde_derive::{Deserialize, Serialize};
-use std::collections::{HashMap, HashSet};
-use std::fmt;
-#[cfg(any(feature = "cache", feature = "cranelift", feature = "winch"))]
-use std::path::Path;
-use std::str::FromStr;
-use std::sync::Arc;
-use target_lexicon::Architecture;
-use wasmparser::WasmFeatures;
-#[cfg(feature = "cache")]
-use wasmtime_cache::CacheConfig;
-use wasmtime_environ::Tunables;
-
-#[cfg(feature = "runtime")]
-use crate::memory::MemoryCreator;
-#[cfg(feature = "runtime")]
-use crate::profiling_agent::{self, ProfilingAgent};
-#[cfg(feature = "runtime")]
-use crate::trampoline::MemoryCreatorProxy;
-#[cfg(feature = "runtime")]
-use wasmtime_runtime::{
-    GcRuntime, InstanceAllocator, OnDemandInstanceAllocator, RuntimeMemoryCreator,
-};
-
-#[cfg(feature = "async")]
-use crate::stack::{StackCreator, StackCreatorProxy};
-#[cfg(feature = "async")]
-use wasmtime_fiber::RuntimeFiberStackCreator;
-
-#[cfg(all(feature = "incremental-cache", feature = "cranelift"))]
-pub use wasmtime_environ::CacheStore;
-#[cfg(feature = "pooling-allocator")]
-use wasmtime_runtime::mpk;
-#[cfg(feature = "pooling-allocator")]
-pub use wasmtime_runtime::MpkEnabled;
-
-/// Represents the module instance allocation strategy to use.
-#[derive(Clone)]
-pub enum InstanceAllocationStrategy {
-    /// The on-demand instance allocation strategy.
-    ///
-    /// Resources related to a module instance are allocated at instantiation time and
-    /// immediately deallocated when the `Store` referencing the instance is dropped.
-    ///
-    /// This is the default allocation strategy for Wasmtime.
-    OnDemand,
-    /// The pooling instance allocation strategy.
-    ///
-    /// A pool of resources is created in advance and module instantiation reuses resources
-    /// from the pool. Resources are returned to the pool when the `Store` referencing the instance
-    /// is dropped.
-    #[cfg(feature = "pooling-allocator")]
-    Pooling(PoolingAllocationConfig),
-}
-
-impl InstanceAllocationStrategy {
-    /// The default pooling instance allocation strategy.
-    #[cfg(feature = "pooling-allocator")]
-    pub fn pooling() -> Self {
-        Self::Pooling(Default::default())
-    }
-}
-
-impl Default for InstanceAllocationStrategy {
-    fn default() -> Self {
-        Self::OnDemand
-    }
-}
-
-#[derive(Clone)]
-/// Configure the strategy used for versioning in serializing and deserializing [`crate::Module`].
-pub enum ModuleVersionStrategy {
-    /// Use the wasmtime crate's Cargo package version.
-    WasmtimeVersion,
-    /// Use a custom version string. Must be at most 255 bytes.
-    Custom(String),
-    /// Emit no version string in serialization, and accept all version strings in deserialization.
-    None,
-}
-
-impl Default for ModuleVersionStrategy {
-    fn default() -> Self {
-        ModuleVersionStrategy::WasmtimeVersion
-    }
-}
-
-impl std::hash::Hash for ModuleVersionStrategy {
-    fn hash<H: std::hash::Hasher>(&self, hasher: &mut H) {
-        match self {
-            Self::WasmtimeVersion => env!("CARGO_PKG_VERSION").hash(hasher),
-            Self::Custom(s) => s.hash(hasher),
-            Self::None => {}
-        };
-    }
-}
-
-/// Global configuration options used to create an [`Engine`](crate::Engine)
-/// and customize its behavior.
-///
-/// This structure exposed a builder-like interface and is primarily consumed by
-/// [`Engine::new()`](crate::Engine::new).
-///
-/// The validation of `Config` is deferred until the engine is being built, thus
-/// a problematic config may cause `Engine::new` to fail.
-#[derive(Clone)]
-pub struct Config {
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    compiler_config: CompilerConfig,
-    profiling_strategy: ProfilingStrategy,
-    tunables: ConfigTunables,
-
-    #[cfg(feature = "cache")]
-    pub(crate) cache_config: CacheConfig,
-    #[cfg(feature = "runtime")]
-    pub(crate) mem_creator: Option<Arc<dyn RuntimeMemoryCreator>>,
-    pub(crate) allocation_strategy: InstanceAllocationStrategy,
-    pub(crate) max_wasm_stack: usize,
-    pub(crate) features: WasmFeatures,
-    pub(crate) wasm_backtrace: bool,
-    pub(crate) wasm_backtrace_details_env_used: bool,
-    pub(crate) native_unwind_info: Option<bool>,
-    #[cfg(feature = "async")]
-    pub(crate) async_stack_size: usize,
-    #[cfg(feature = "async")]
-    pub(crate) stack_creator: Option<Arc<dyn RuntimeFiberStackCreator>>,
-    pub(crate) async_support: bool,
-    pub(crate) module_version: ModuleVersionStrategy,
-    pub(crate) parallel_compilation: bool,
-    pub(crate) memory_init_cow: bool,
-    pub(crate) memory_guaranteed_dense_image_size: u64,
-    pub(crate) force_memory_init_memfd: bool,
-    pub(crate) wmemcheck: bool,
-    pub(crate) coredump_on_trap: bool,
-    pub(crate) macos_use_mach_ports: bool,
-}
-
-#[derive(Default, Clone)]
-struct ConfigTunables {
-    static_memory_bound: Option<u64>,
-    static_memory_offset_guard_size: Option<u64>,
-    dynamic_memory_offset_guard_size: Option<u64>,
-    dynamic_memory_growth_reserve: Option<u64>,
-    generate_native_debuginfo: Option<bool>,
-    parse_wasm_debuginfo: Option<bool>,
-    consume_fuel: Option<bool>,
-    epoch_interruption: Option<bool>,
-    static_memory_bound_is_maximum: Option<bool>,
-    guard_before_linear_memory: Option<bool>,
-    generate_address_map: Option<bool>,
-    debug_adapter_modules: Option<bool>,
-    relaxed_simd_deterministic: Option<bool>,
-    tail_callable: Option<bool>,
-}
-
-/// User-provided configuration for the compiler.
-#[cfg(any(feature = "cranelift", feature = "winch"))]
-#[derive(Debug, Clone)]
-struct CompilerConfig {
-    strategy: Strategy,
-    target: Option<target_lexicon::Triple>,
-    settings: HashMap<String, String>,
-    flags: HashSet<String>,
-    #[cfg(all(feature = "incremental-cache", feature = "cranelift"))]
-    cache_store: Option<Arc<dyn CacheStore>>,
-    clif_dir: Option<std::path::PathBuf>,
-    wmemcheck: bool,
-}
-
-#[cfg(any(feature = "cranelift", feature = "winch"))]
-impl CompilerConfig {
-    fn new(strategy: Strategy) -> Self {
-        Self {
-            strategy,
-            target: None,
-            settings: HashMap::new(),
-            flags: HashSet::new(),
-            #[cfg(all(feature = "incremental-cache", feature = "cranelift"))]
-            cache_store: None,
-            clif_dir: None,
-            wmemcheck: false,
-        }
-    }
-
-    /// Ensures that the key is not set or equals to the given value.
-    /// If the key is not set, it will be set to the given value.
-    ///
-    /// # Returns
-    ///
-    /// Returns true if successfully set or already had the given setting
-    /// value, or false if the setting was explicitly set to something
-    /// else previously.
-    fn ensure_setting_unset_or_given(&mut self, k: &str, v: &str) -> bool {
-        if let Some(value) = self.settings.get(k) {
-            if value != v {
-                return false;
-            }
-        } else {
-            self.settings.insert(k.to_string(), v.to_string());
-        }
-        true
-    }
-}
-
-#[cfg(any(feature = "cranelift", feature = "winch"))]
-impl Default for CompilerConfig {
-    fn default() -> Self {
-        Self::new(Strategy::Auto)
-    }
-}
-
-impl Config {
-    /// Creates a new configuration object with the default configuration
-    /// specified.
-    pub fn new() -> Self {
-        let mut ret = Self {
-            tunables: ConfigTunables::default(),
-            #[cfg(any(feature = "cranelift", feature = "winch"))]
-            compiler_config: CompilerConfig::default(),
-            #[cfg(feature = "cache")]
-            cache_config: CacheConfig::new_cache_disabled(),
-            profiling_strategy: ProfilingStrategy::None,
-            #[cfg(feature = "runtime")]
-            mem_creator: None,
-            allocation_strategy: InstanceAllocationStrategy::OnDemand,
-            // 512k of stack -- note that this is chosen currently to not be too
-            // big, not be too small, and be a good default for most platforms.
-            // One platform of particular note is Windows where the stack size
-            // of the main thread seems to, by default, be smaller than that of
-            // Linux and macOS. This 512k value at least lets our current test
-            // suite pass on the main thread of Windows (using `--test-threads
-            // 1` forces this), or at least it passed when this change was
-            // committed.
-            max_wasm_stack: 512 * 1024,
-            wasm_backtrace: true,
-            wasm_backtrace_details_env_used: false,
-            native_unwind_info: None,
-            features: WasmFeatures::default(),
-            #[cfg(feature = "async")]
-            async_stack_size: 2 << 20,
-            #[cfg(feature = "async")]
-            stack_creator: None,
-            async_support: false,
-            module_version: ModuleVersionStrategy::default(),
-            parallel_compilation: !cfg!(miri),
-            memory_init_cow: true,
-            memory_guaranteed_dense_image_size: 16 << 20,
-            force_memory_init_memfd: false,
-            wmemcheck: false,
-            coredump_on_trap: false,
-            macos_use_mach_ports: !cfg!(miri),
-        };
-        #[cfg(any(feature = "cranelift", feature = "winch"))]
-        {
-            ret.cranelift_debug_verifier(false);
-            ret.cranelift_opt_level(OptLevel::Speed);
-        }
-
-        // Conditionally enabled features depending on compile-time crate
-        // features. Note that if these features are disabled then `Config` has
-        // no way of re-enabling them.
-        ret.features.reference_types = cfg!(feature = "gc");
-        ret.features.threads = cfg!(feature = "threads");
-        ret.features.component_model = cfg!(feature = "component-model");
-
-        // If GC is disabled at compile time also disable it in features
-        // forcibly irrespective of `wasmparser` defaults. Note that these also
-        // aren't yet fully implemented in Wasmtime.
-        if !cfg!(feature = "gc") {
-            ret.features.function_references = false;
-            ret.features.gc = false;
-        }
-
-        ret.wasm_multi_value(true);
-        ret.wasm_bulk_memory(true);
-        ret.wasm_simd(true);
-        ret.wasm_backtrace_details(WasmBacktraceDetails::Environment);
-
-        // This is on-by-default in `wasmparser` since it's a stage 4+ proposal
-        // but it's not implemented in Wasmtime yet so disable it.
-        ret.features.tail_call = false;
-
-        ret
-    }
-
-    /// Sets the target triple for the [`Config`].
-    ///
-    /// By default, the host target triple is used for the [`Config`].
-    ///
-    /// This method can be used to change the target triple.
-    ///
-    /// Cranelift flags will not be inferred for the given target and any
-    /// existing target-specific Cranelift flags will be cleared.
-    ///
-    /// # Errors
-    ///
-    /// This method will error if the given target triple is not supported.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn target(&mut self, target: &str) -> Result<&mut Self> {
-        self.compiler_config.target =
-            Some(target_lexicon::Triple::from_str(target).map_err(|e| anyhow::anyhow!(e))?);
-
-        Ok(self)
-    }
-
-    /// Enables the incremental compilation cache in Cranelift, using the provided `CacheStore`
-    /// backend for storage.
-    #[cfg(all(feature = "incremental-cache", feature = "cranelift"))]
-    pub fn enable_incremental_compilation(
-        &mut self,
-        cache_store: Arc<dyn CacheStore>,
-    ) -> Result<&mut Self> {
-        self.compiler_config.cache_store = Some(cache_store);
-        Ok(self)
-    }
-
-    /// Whether or not to enable support for asynchronous functions in Wasmtime.
-    ///
-    /// When enabled, the config can optionally define host functions with `async`.
-    /// Instances created and functions called with this `Config` *must* be called
-    /// through their asynchronous APIs, however. For example using
-    /// [`Func::call`](crate::Func::call) will panic when used with this config.
-    ///
-    /// # Asynchronous Wasm
-    ///
-    /// WebAssembly does not currently have a way to specify at the bytecode
-    /// level what is and isn't async. Host-defined functions, however, may be
-    /// defined as `async`. WebAssembly imports always appear synchronous, which
-    /// gives rise to a bit of an impedance mismatch here. To solve this
-    /// Wasmtime supports "asynchronous configs" which enables calling these
-    /// asynchronous functions in a way that looks synchronous to the executing
-    /// WebAssembly code.
-    ///
-    /// An asynchronous config must always invoke wasm code asynchronously,
-    /// meaning we'll always represent its computation as a
-    /// [`Future`](std::future::Future). The `poll` method of the futures
-    /// returned by Wasmtime will perform the actual work of calling the
-    /// WebAssembly. Wasmtime won't manage its own thread pools or similar,
-    /// that's left up to the embedder.
-    ///
-    /// To implement futures in a way that WebAssembly sees asynchronous host
-    /// functions as synchronous, all async Wasmtime futures will execute on a
-    /// separately allocated native stack from the thread otherwise executing
-    /// Wasmtime. This separate native stack can then be switched to and from.
-    /// Using this whenever an `async` host function returns a future that
-    /// resolves to `Pending` we switch away from the temporary stack back to
-    /// the main stack and propagate the `Pending` status.
-    ///
-    /// In general it's encouraged that the integration with `async` and
-    /// wasmtime is designed early on in your embedding of Wasmtime to ensure
-    /// that it's planned that WebAssembly executes in the right context of your
-    /// application.
-    ///
-    /// # Execution in `poll`
-    ///
-    /// The [`Future::poll`](std::future::Future::poll) method is the main
-    /// driving force behind Rust's futures. That method's own documentation
-    /// states "an implementation of `poll` should strive to return quickly, and
-    /// should not block". This, however, can be at odds with executing
-    /// WebAssembly code as part of the `poll` method itself. If your
-    /// WebAssembly is untrusted then this could allow the `poll` method to take
-    /// arbitrarily long in the worst case, likely blocking all other
-    /// asynchronous tasks.
-    ///
-    /// To remedy this situation you have a a few possible ways to solve this:
-    ///
-    /// * The most efficient solution is to enable
-    ///   [`Config::epoch_interruption`] in conjunction with
-    ///   [`crate::Store::epoch_deadline_async_yield_and_update`]. Coupled with
-    ///   periodic calls to [`crate::Engine::increment_epoch`] this will cause
-    ///   executing WebAssembly to periodically yield back according to the
-    ///   epoch configuration settings. This enables `Future::poll` to take at
-    ///   most a certain amount of time according to epoch configuration
-    ///   settings and when increments happen. The benefit of this approach is
-    ///   that the instrumentation in compiled code is quite lightweight, but a
-    ///   downside can be that the scheduling is somewhat nondeterministic since
-    ///   increments are usually timer-based which are not always deterministic.
-    ///
-    ///   Note that to prevent infinite execution of wasm it's recommended to
-    ///   place a timeout on the entire future representing executing wasm code
-    ///   and the periodic yields with epochs should ensure that when the
-    ///   timeout is reached it's appropriately recognized.
-    ///
-    /// * Alternatively you can enable the
-    ///   [`Config::consume_fuel`](crate::Config::consume_fuel) method as well
-    ///   as [`crate::Store::fuel_async_yield_interval`] When doing so this will
-    ///   configure Wasmtime futures to yield periodically while they're
-    ///   executing WebAssembly code. After consuming the specified amount of
-    ///   fuel wasm futures will return `Poll::Pending` from their `poll`
-    ///   method, and will get automatically re-polled later. This enables the
-    ///   `Future::poll` method to take roughly a fixed amount of time since
-    ///   fuel is guaranteed to get consumed while wasm is executing. Unlike
-    ///   epoch-based preemption this is deterministic since wasm always
-    ///   consumes a fixed amount of fuel per-operation. The downside of this
-    ///   approach, however, is that the compiled code instrumentation is
-    ///   significantly more expensive than epoch checks.
-    ///
-    ///   Note that to prevent infinite execution of wasm it's recommended to
-    ///   place a timeout on the entire future representing executing wasm code
-    ///   and the periodic yields with epochs should ensure that when the
-    ///   timeout is reached it's appropriately recognized.
-    ///
-    /// In all cases special care needs to be taken when integrating
-    /// asynchronous wasm into your application. You should carefully plan where
-    /// WebAssembly will execute and what compute resources will be allotted to
-    /// it. If Wasmtime doesn't support exactly what you'd like just yet, please
-    /// feel free to open an issue!
-    #[cfg(feature = "async")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "async")))]
-    pub fn async_support(&mut self, enable: bool) -> &mut Self {
-        self.async_support = enable;
-        self
-    }
-
-    /// Configures whether DWARF debug information will be emitted during
-    /// compilation.
-    ///
-    /// Note that the `debug-builtins` compile-time Cargo feature must also be
-    /// enabled for native debuggers such as GDB or LLDB to be able to debug
-    /// guest WebAssembly programs.
-    ///
-    /// By default this option is `false`.
-    pub fn debug_info(&mut self, enable: bool) -> &mut Self {
-        self.tunables.generate_native_debuginfo = Some(enable);
-        self
-    }
-
-    /// Configures whether [`WasmBacktrace`] will be present in the context of
-    /// errors returned from Wasmtime.
-    ///
-    /// A backtrace may be collected whenever an error is returned from a host
-    /// function call through to WebAssembly or when WebAssembly itself hits a
-    /// trap condition, such as an out-of-bounds memory access. This flag
-    /// indicates, in these conditions, whether the backtrace is collected or
-    /// not.
-    ///
-    /// Currently wasm backtraces are implemented through frame pointer walking.
-    /// This means that collecting a backtrace is expected to be a fast and
-    /// relatively cheap operation. Additionally backtrace collection is
-    /// suitable in concurrent environments since one thread capturing a
-    /// backtrace won't block other threads.
-    ///
-    /// Collected backtraces are attached via [`anyhow::Error::context`] to
-    /// errors returned from host functions. The [`WasmBacktrace`] type can be
-    /// acquired via [`anyhow::Error::downcast_ref`] to inspect the backtrace.
-    /// When this option is disabled then this context is never applied to
-    /// errors coming out of wasm.
-    ///
-    /// This option is `true` by default.
-    ///
-    /// [`WasmBacktrace`]: crate::WasmBacktrace
-    pub fn wasm_backtrace(&mut self, enable: bool) -> &mut Self {
-        self.wasm_backtrace = enable;
-        self
-    }
-
-    /// Configures whether backtraces in `Trap` will parse debug info in the wasm file to
-    /// have filename/line number information.
-    ///
-    /// When enabled this will causes modules to retain debugging information
-    /// found in wasm binaries. This debug information will be used when a trap
-    /// happens to symbolicate each stack frame and attempt to print a
-    /// filename/line number for each wasm frame in the stack trace.
-    ///
-    /// By default this option is `WasmBacktraceDetails::Environment`, meaning
-    /// that wasm will read `WASMTIME_BACKTRACE_DETAILS` to indicate whether details
-    /// should be parsed.
-    pub fn wasm_backtrace_details(&mut self, enable: WasmBacktraceDetails) -> &mut Self {
-        self.wasm_backtrace_details_env_used = false;
-        self.tunables.parse_wasm_debuginfo = match enable {
-            WasmBacktraceDetails::Enable => Some(true),
-            WasmBacktraceDetails::Disable => Some(false),
-            WasmBacktraceDetails::Environment => {
-                self.wasm_backtrace_details_env_used = true;
-                std::env::var("WASMTIME_BACKTRACE_DETAILS")
-                    .map(|s| Some(s == "1"))
-                    .unwrap_or(Some(false))
-            }
-        };
-        self
-    }
-
-    /// Configures whether to generate native unwind information
-    /// (e.g. `.eh_frame` on Linux).
-    ///
-    /// This configuration option only exists to help third-party stack
-    /// capturing mechanisms, such as the system's unwinder or the `backtrace`
-    /// crate, determine how to unwind through Wasm frames. It does not affect
-    /// whether Wasmtime can capture Wasm backtraces or not. The presence of
-    /// [`WasmBacktrace`] is controlled by the [`Config::wasm_backtrace`]
-    /// option.
-    ///
-    /// Native unwind information is included:
-    /// - When targeting Windows, since the Windows ABI requires it.
-    /// - By default.
-    ///
-    /// [`WasmBacktrace`]: crate::WasmBacktrace
-    pub fn native_unwind_info(&mut self, enable: bool) -> &mut Self {
-        self.native_unwind_info = Some(enable);
-        self
-    }
-
-    /// Configures whether execution of WebAssembly will "consume fuel" to
-    /// either halt or yield execution as desired.
-    ///
-    /// This can be used to deterministically prevent infinitely-executing
-    /// WebAssembly code by instrumenting generated code to consume fuel as it
-    /// executes. When fuel runs out a trap is raised, however [`Store`] can be
-    /// configured to yield execution periodically via
-    /// [`crate::Store::fuel_async_yield_interval`].
-    ///
-    /// Note that a [`Store`] starts with no fuel, so if you enable this option
-    /// you'll have to be sure to pour some fuel into [`Store`] before
-    /// executing some code.
-    ///
-    /// By default this option is `false`.
-    ///
-    /// [`Store`]: crate::Store
-    pub fn consume_fuel(&mut self, enable: bool) -> &mut Self {
-        self.tunables.consume_fuel = Some(enable);
-        self
-    }
-
-    /// Enables epoch-based interruption.
-    ///
-    /// When executing code in async mode, we sometimes want to
-    /// implement a form of cooperative timeslicing: long-running Wasm
-    /// guest code should periodically yield to the executor
-    /// loop. This yielding could be implemented by using "fuel" (see
-    /// [`consume_fuel`](Config::consume_fuel)). However, fuel
-    /// instrumentation is somewhat expensive: it modifies the
-    /// compiled form of the Wasm code so that it maintains a precise
-    /// instruction count, frequently checking this count against the
-    /// remaining fuel. If one does not need this precise count or
-    /// deterministic interruptions, and only needs a periodic
-    /// interrupt of some form, then It would be better to have a more
-    /// lightweight mechanism.
-    ///
-    /// Epoch-based interruption is that mechanism. There is a global
-    /// "epoch", which is a counter that divides time into arbitrary
-    /// periods (or epochs). This counter lives on the
-    /// [`Engine`](crate::Engine) and can be incremented by calling
-    /// [`Engine::increment_epoch`](crate::Engine::increment_epoch).
-    /// Epoch-based instrumentation works by setting a "deadline
-    /// epoch". The compiled code knows the deadline, and at certain
-    /// points, checks the current epoch against that deadline. It
-    /// will yield if the deadline has been reached.
-    ///
-    /// The idea is that checking an infrequently-changing counter is
-    /// cheaper than counting and frequently storing a precise metric
-    /// (instructions executed) locally. The interruptions are not
-    /// deterministic, but if the embedder increments the epoch in a
-    /// periodic way (say, every regular timer tick by a thread or
-    /// signal handler), then we can ensure that all async code will
-    /// yield to the executor within a bounded time.
-    ///
-    /// The deadline check cannot be avoided by malicious wasm code. It is safe
-    /// to use epoch deadlines to limit the execution time of untrusted
-    /// code.
-    ///
-    /// The [`Store`](crate::Store) tracks the deadline, and controls
-    /// what happens when the deadline is reached during
-    /// execution. Several behaviors are possible:
-    ///
-    /// - Trap if code is executing when the epoch deadline is
-    ///   met. See
-    ///   [`Store::epoch_deadline_trap`](crate::Store::epoch_deadline_trap).
-    ///
-    /// - Call an arbitrary function. This function may chose to trap or
-    ///   increment the epoch. See
-    ///   [`Store::epoch_deadline_callback`](crate::Store::epoch_deadline_callback).
-    ///
-    /// - Yield to the executor loop, then resume when the future is
-    ///   next polled. See
-    ///   [`Store::epoch_deadline_async_yield_and_update`](crate::Store::epoch_deadline_async_yield_and_update).
-    ///
-    /// Trapping is the default. The yielding behaviour may be used for
-    /// the timeslicing behavior described above.
-    ///
-    /// This feature is available with or without async support.
-    /// However, without async support, the timeslicing behaviour is
-    /// not available. This means epoch-based interruption can only
-    /// serve as a simple external-interruption mechanism.
-    ///
-    /// An initial deadline must be set before executing code by calling
-    /// [`Store::set_epoch_deadline`](crate::Store::set_epoch_deadline). If this
-    /// deadline is not configured then wasm will immediately trap.
-    ///
-    /// ## When to use fuel vs. epochs
-    ///
-    /// In general, epoch-based interruption results in faster
-    /// execution. This difference is sometimes significant: in some
-    /// measurements, up to 2-3x. This is because epoch-based
-    /// interruption does less work: it only watches for a global
-    /// rarely-changing counter to increment, rather than keeping a
-    /// local frequently-changing counter and comparing it to a
-    /// deadline.
-    ///
-    /// Fuel, in contrast, should be used when *deterministic*
-    /// yielding or trapping is needed. For example, if it is required
-    /// that the same function call with the same starting state will
-    /// always either complete or trap with an out-of-fuel error,
-    /// deterministically, then fuel with a fixed bound should be
-    /// used.
-    ///
-    /// # See Also
-    ///
-    /// - [`Engine::increment_epoch`](crate::Engine::increment_epoch)
-    /// - [`Store::set_epoch_deadline`](crate::Store::set_epoch_deadline)
-    /// - [`Store::epoch_deadline_trap`](crate::Store::epoch_deadline_trap)
-    /// - [`Store::epoch_deadline_callback`](crate::Store::epoch_deadline_callback)
-    /// - [`Store::epoch_deadline_async_yield_and_update`](crate::Store::epoch_deadline_async_yield_and_update)
-    pub fn epoch_interruption(&mut self, enable: bool) -> &mut Self {
-        self.tunables.epoch_interruption = Some(enable);
-        self
-    }
-
-    /// Configures the maximum amount of stack space available for
-    /// executing WebAssembly code.
-    ///
-    /// WebAssembly has well-defined semantics on stack overflow. This is
-    /// intended to be a knob which can help configure how much stack space
-    /// wasm execution is allowed to consume. Note that the number here is not
-    /// super-precise, but rather wasm will take at most "pretty close to this
-    /// much" stack space.
-    ///
-    /// If a wasm call (or series of nested wasm calls) take more stack space
-    /// than the `size` specified then a stack overflow trap will be raised.
-    ///
-    /// Caveat: this knob only limits the stack space consumed by wasm code.
-    /// More importantly, it does not ensure that this much stack space is
-    /// available on the calling thread stack. Exhausting the thread stack
-    /// typically leads to an **abort** of the process.
-    ///
-    /// Here are some examples of how that could happen:
-    ///
-    /// - Let's assume this option is set to 2 MiB and then a thread that has
-    ///   a stack with 512 KiB left.
-    ///
-    ///   If wasm code consumes more than 512 KiB then the process will be aborted.
-    ///
-    /// - Assuming the same conditions, but this time wasm code does not consume
-    ///   any stack but calls into a host function. The host function consumes
-    ///   more than 512 KiB of stack space. The process will be aborted.
-    ///
-    /// There's another gotcha related to recursive calling into wasm: the stack
-    /// space consumed by a host function is counted towards this limit. The
-    /// host functions are not prevented from consuming more than this limit.
-    /// However, if the host function that used more than this limit and called
-    /// back into wasm, then the execution will trap immediatelly because of
-    /// stack overflow.
-    ///
-    /// When the `async` feature is enabled, this value cannot exceed the
-    /// `async_stack_size` option. Be careful not to set this value too close
-    /// to `async_stack_size` as doing so may limit how much stack space
-    /// is available for host functions.
-    ///
-    /// By default this option is 512 KiB.
-    ///
-    /// # Errors
-    ///
-    /// The `Engine::new` method will fail if the `size` specified here is
-    /// either 0 or larger than the [`Config::async_stack_size`] configuration.
-    pub fn max_wasm_stack(&mut self, size: usize) -> &mut Self {
-        self.max_wasm_stack = size;
-        self
-    }
-
-    /// Configures the size of the stacks used for asynchronous execution.
-    ///
-    /// This setting configures the size of the stacks that are allocated for
-    /// asynchronous execution. The value cannot be less than `max_wasm_stack`.
-    ///
-    /// The amount of stack space guaranteed for host functions is
-    /// `async_stack_size - max_wasm_stack`, so take care not to set these two values
-    /// close to one another; doing so may cause host functions to overflow the
-    /// stack and abort the process.
-    ///
-    /// By default this option is 2 MiB.
-    ///
-    /// # Errors
-    ///
-    /// The `Engine::new` method will fail if the value for this option is
-    /// smaller than the [`Config::max_wasm_stack`] option.
-    #[cfg(feature = "async")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "async")))]
-    pub fn async_stack_size(&mut self, size: usize) -> &mut Self {
-        self.async_stack_size = size;
-        self
-    }
-
-    /// Configures whether the WebAssembly tail calls proposal will be enabled
-    /// for compilation or not.
-    ///
-    /// The [WebAssembly tail calls proposal] introduces the `return_call` and
-    /// `return_call_indirect` instructions. These instructions allow for Wasm
-    /// programs to implement some recursive algorithms with *O(1)* stack space
-    /// usage.
-    ///
-    /// This feature is disabled by default.
-    ///
-    /// [WebAssembly tail calls proposal]: https://github.com/WebAssembly/tail-call
-    pub fn wasm_tail_call(&mut self, enable: bool) -> &mut Self {
-        self.features.tail_call = enable;
-        self.tunables.tail_callable = Some(enable);
-        self
-    }
-
-    /// Configures whether the WebAssembly [threads] proposal will be enabled
-    /// for compilation.
-    ///
-    /// This feature gates items such as shared memories and atomic
-    /// instructions. Note that the threads feature depends on the bulk memory
-    /// feature, which is enabled by default. Additionally note that while the
-    /// wasm feature is called "threads" it does not actually include the
-    /// ability to spawn threads. Spawning threads is part of the [wasi-threads]
-    /// proposal which is a separately gated feature in Wasmtime.
-    ///
-    /// Embeddings of Wasmtime are able to build their own custom threading
-    /// scheme on top of the core wasm threads proposal, however.
-    ///
-    /// This is `true` by default.
-    ///
-    /// [threads]: https://github.com/webassembly/threads
-    /// [wasi-threads]: https://github.com/webassembly/wasi-threads
-    #[cfg(feature = "threads")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "threads")))]
-    pub fn wasm_threads(&mut self, enable: bool) -> &mut Self {
-        self.features.threads = enable;
-        self
-    }
-
-    /// Configures whether the [WebAssembly reference types proposal][proposal]
-    /// will be enabled for compilation.
-    ///
-    /// This feature gates items such as the `externref` and `funcref` types as
-    /// well as allowing a module to define multiple tables.
-    ///
-    /// Note that the reference types proposal depends on the bulk memory proposal.
-    ///
-    /// This feature is `true` by default.
-    ///
-    /// # Errors
-    ///
-    /// The validation of this feature are deferred until the engine is being built,
-    /// and thus may cause `Engine::new` fail if the `bulk_memory` feature is disabled.
-    ///
-    /// [proposal]: https://github.com/webassembly/reference-types
-    #[cfg(feature = "gc")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "gc")))]
-    pub fn wasm_reference_types(&mut self, enable: bool) -> &mut Self {
-        self.features.reference_types = enable;
-        self
-    }
-
-    /// Configures whether the [WebAssembly function references
-    /// proposal][proposal] will be enabled for compilation.
-    ///
-    /// This feature gates non-nullable reference types, function reference
-    /// types, `call_ref`, `ref.func`, and non-nullable reference related
-    /// instructions.
-    ///
-    /// Note that the function references proposal depends on the reference
-    /// types proposal.
-    ///
-    /// This feature is `false` by default.
-    ///
-    /// [proposal]: https://github.com/WebAssembly/function-references
-    #[cfg(feature = "gc")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "gc")))]
-    pub fn wasm_function_references(&mut self, enable: bool) -> &mut Self {
-        self.features.function_references = enable;
-        self
-    }
-
-    /// Configures whether the [WebAssembly Garbage Collection
-    /// proposal][proposal] will be enabled for compilation.
-    ///
-    /// This feature gates `struct` and `array` type definitions and references,
-    /// the `i31ref` type, and all related instructions.
-    ///
-    /// Note that the function references proposal depends on the typed function
-    /// references proposal.
-    ///
-    /// This feature is `false` by default.
-    ///
-    /// **Warning: Wasmtime's implementation of the GC proposal is still in
-    /// progress and generally not ready for primetime.**
-    ///
-    /// [proposal]: https://github.com/WebAssembly/gc
-    #[cfg(feature = "gc")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "gc")))]
-    pub fn wasm_gc(&mut self, enable: bool) -> &mut Self {
-        self.features.gc = enable;
-        self
-    }
-
-    /// Configures whether the WebAssembly SIMD proposal will be
-    /// enabled for compilation.
-    ///
-    /// The [WebAssembly SIMD proposal][proposal]. This feature gates items such
-    /// as the `v128` type and all of its operators being in a module. Note that
-    /// this does not enable the [relaxed simd proposal].
-    ///
-    /// On x86_64 platforms note that enabling this feature requires SSE 4.2 and
-    /// below to be available on the target platform. Compilation will fail if
-    /// the compile target does not include SSE 4.2.
-    ///
-    /// This is `true` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/simd
-    /// [relaxed simd proposal]: https://github.com/WebAssembly/relaxed-simd
-    pub fn wasm_simd(&mut self, enable: bool) -> &mut Self {
-        self.features.simd = enable;
-        self
-    }
-
-    /// Configures whether the WebAssembly Relaxed SIMD proposal will be
-    /// enabled for compilation.
-    ///
-    /// The relaxed SIMD proposal adds new instructions to WebAssembly which,
-    /// for some specific inputs, are allowed to produce different results on
-    /// different hosts. More-or-less this proposal enables exposing
-    /// platform-specific semantics of SIMD instructions in a controlled
-    /// fashion to a WebAssembly program. From an embedder's perspective this
-    /// means that WebAssembly programs may execute differently depending on
-    /// whether the host is x86_64 or AArch64, for example.
-    ///
-    /// By default Wasmtime lowers relaxed SIMD instructions to the fastest
-    /// lowering for the platform it's running on. This means that, by default,
-    /// some relaxed SIMD instructions may have different results for the same
-    /// inputs across x86_64 and AArch64. This behavior can be disabled through
-    /// the [`Config::relaxed_simd_deterministic`] option which will force
-    /// deterministic behavior across all platforms, as classified by the
-    /// specification, at the cost of performance.
-    ///
-    /// This is `true` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/relaxed-simd
-    pub fn wasm_relaxed_simd(&mut self, enable: bool) -> &mut Self {
-        self.features.relaxed_simd = enable;
-        self
-    }
-
-    /// This option can be used to control the behavior of the [relaxed SIMD
-    /// proposal's][proposal] instructions.
-    ///
-    /// The relaxed SIMD proposal introduces instructions that are allowed to
-    /// have different behavior on different architectures, primarily to afford
-    /// an efficient implementation on all architectures. This means, however,
-    /// that the same module may execute differently on one host than another,
-    /// which typically is not otherwise the case. This option is provided to
-    /// force Wasmtime to generate deterministic code for all relaxed simd
-    /// instructions, at the cost of performance, for all architectures. When
-    /// this option is enabled then the deterministic behavior of all
-    /// instructions in the relaxed SIMD proposal is selected.
-    ///
-    /// This is `false` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/relaxed-simd
-    pub fn relaxed_simd_deterministic(&mut self, enable: bool) -> &mut Self {
-        self.tunables.relaxed_simd_deterministic = Some(enable);
-        self
-    }
-
-    /// Configures whether the [WebAssembly bulk memory operations
-    /// proposal][proposal] will be enabled for compilation.
-    ///
-    /// This feature gates items such as the `memory.copy` instruction, passive
-    /// data/table segments, etc, being in a module.
-    ///
-    /// This is `true` by default.
-    ///
-    /// Feature `reference_types`, which is also `true` by default, requires
-    /// this feature to be enabled. Thus disabling this feature must also disable
-    /// `reference_types` as well using [`wasm_reference_types`](crate::Config::wasm_reference_types).
-    ///
-    /// # Errors
-    ///
-    /// Disabling this feature without disabling `reference_types` will cause
-    /// `Engine::new` to fail.
-    ///
-    /// [proposal]: https://github.com/webassembly/bulk-memory-operations
-    pub fn wasm_bulk_memory(&mut self, enable: bool) -> &mut Self {
-        self.features.bulk_memory = enable;
-        self
-    }
-
-    /// Configures whether the WebAssembly multi-value [proposal] will
-    /// be enabled for compilation.
-    ///
-    /// This feature gates functions and blocks returning multiple values in a
-    /// module, for example.
-    ///
-    /// This is `true` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/multi-value
-    pub fn wasm_multi_value(&mut self, enable: bool) -> &mut Self {
-        self.features.multi_value = enable;
-        self
-    }
-
-    /// Configures whether the WebAssembly multi-memory [proposal] will
-    /// be enabled for compilation.
-    ///
-    /// This feature gates modules having more than one linear memory
-    /// declaration or import.
-    ///
-    /// This is `true` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/multi-memory
-    pub fn wasm_multi_memory(&mut self, enable: bool) -> &mut Self {
-        self.features.multi_memory = enable;
-        self
-    }
-
-    /// Configures whether the WebAssembly memory64 [proposal] will
-    /// be enabled for compilation.
-    ///
-    /// Note that this the upstream specification is not finalized and Wasmtime
-    /// may also have bugs for this feature since it hasn't been exercised
-    /// much.
-    ///
-    /// This is `false` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/memory64
-    pub fn wasm_memory64(&mut self, enable: bool) -> &mut Self {
-        self.features.memory64 = enable;
-        self
-    }
-
-    /// Configures whether the WebAssembly component-model [proposal] will
-    /// be enabled for compilation.
-    ///
-    /// Note that this feature is a work-in-progress and is incomplete.
-    ///
-    /// This is `false` by default.
-    ///
-    /// [proposal]: https://github.com/webassembly/component-model
-    #[cfg(feature = "component-model")]
-    pub fn wasm_component_model(&mut self, enable: bool) -> &mut Self {
-        self.features.component_model = enable;
-        self
-    }
-
-    /// Configures which compilation strategy will be used for wasm modules.
-    ///
-    /// This method can be used to configure which compiler is used for wasm
-    /// modules, and for more documentation consult the [`Strategy`] enumeration
-    /// and its documentation.
-    ///
-    /// The default value for this is `Strategy::Auto`.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn strategy(&mut self, strategy: Strategy) -> &mut Self {
-        self.compiler_config.strategy = strategy;
-        self
-    }
-
-    /// Creates a default profiler based on the profiling strategy chosen.
-    ///
-    /// Profiler creation calls the type's default initializer where the purpose is
-    /// really just to put in place the type used for profiling.
-    ///
-    /// Some [`ProfilingStrategy`] require specific platforms or particular feature
-    /// to be enabled, such as `ProfilingStrategy::JitDump` requires the `jitdump`
-    /// feature.
-    ///
-    /// # Errors
-    ///
-    /// The validation of this field is deferred until the engine is being built, and thus may
-    /// cause `Engine::new` fail if the required feature is disabled, or the platform is not
-    /// supported.
-    pub fn profiler(&mut self, profile: ProfilingStrategy) -> &mut Self {
-        self.profiling_strategy = profile;
-        self
-    }
-
-    /// Configures whether the debug verifier of Cranelift is enabled or not.
-    ///
-    /// When Cranelift is used as a code generation backend this will configure
-    /// it to have the `enable_verifier` flag which will enable a number of debug
-    /// checks inside of Cranelift. This is largely only useful for the
-    /// developers of wasmtime itself.
-    ///
-    /// The default value for this is `false`
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn cranelift_debug_verifier(&mut self, enable: bool) -> &mut Self {
-        let val = if enable { "true" } else { "false" };
-        self.compiler_config
-            .settings
-            .insert("enable_verifier".to_string(), val.to_string());
-        self
-    }
-
-    /// Configures the Cranelift code generator optimization level.
-    ///
-    /// When the Cranelift code generator is used you can configure the
-    /// optimization level used for generated code in a few various ways. For
-    /// more information see the documentation of [`OptLevel`].
-    ///
-    /// The default value for this is `OptLevel::None`.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn cranelift_opt_level(&mut self, level: OptLevel) -> &mut Self {
-        let val = match level {
-            OptLevel::None => "none",
-            OptLevel::Speed => "speed",
-            OptLevel::SpeedAndSize => "speed_and_size",
-        };
-        self.compiler_config
-            .settings
-            .insert("opt_level".to_string(), val.to_string());
-        self
-    }
-
-    /// Configures whether Cranelift should perform a NaN-canonicalization pass.
-    ///
-    /// When Cranelift is used as a code generation backend this will configure
-    /// it to replace NaNs with a single canonical value. This is useful for
-    /// users requiring entirely deterministic WebAssembly computation.  This is
-    /// not required by the WebAssembly spec, so it is not enabled by default.
-    ///
-    /// Note that this option affects not only WebAssembly's `f32` and `f64`
-    /// types but additionally the `v128` type. This option will cause
-    /// operations using any of these types to have extra checks placed after
-    /// them to normalize NaN values as needed.
-    ///
-    /// The default value for this is `false`
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn cranelift_nan_canonicalization(&mut self, enable: bool) -> &mut Self {
-        let val = if enable { "true" } else { "false" };
-        self.compiler_config
-            .settings
-            .insert("enable_nan_canonicalization".to_string(), val.to_string());
-        self
-    }
-
-    /// Controls whether proof-carrying code (PCC) is used to validate
-    /// lowering of Wasm sandbox checks.
-    ///
-    /// Proof-carrying code carries "facts" about program values from
-    /// the IR all the way to machine code, and checks those facts
-    /// against known machine-instruction semantics. This guards
-    /// against bugs in instruction lowering that might create holes
-    /// in the Wasm sandbox.
-    ///
-    /// PCC is designed to be fast: it does not require complex
-    /// solvers or logic engines to verify, but only a linear pass
-    /// over a trail of "breadcrumbs" or facts at each intermediate
-    /// value. Thus, it is appropriate to enable in production.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub fn cranelift_pcc(&mut self, enable: bool) -> &mut Self {
-        let val = if enable { "true" } else { "false" };
-        self.compiler_config
-            .settings
-            .insert("enable_pcc".to_string(), val.to_string());
-        self
-    }
-
-    /// Allows setting a Cranelift boolean flag or preset. This allows
-    /// fine-tuning of Cranelift settings.
-    ///
-    /// Since Cranelift flags may be unstable, this method should not be considered to be stable
-    /// either; other `Config` functions should be preferred for stability.
-    ///
-    /// # Safety
-    ///
-    /// This is marked as unsafe, because setting the wrong flag might break invariants,
-    /// resulting in execution hazards.
-    ///
-    /// # Errors
-    ///
-    /// The validation of the flags are deferred until the engine is being built, and thus may
-    /// cause `Engine::new` fail if the flag's name does not exist, or the value is not appropriate
-    /// for the flag type.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub unsafe fn cranelift_flag_enable(&mut self, flag: &str) -> &mut Self {
-        self.compiler_config.flags.insert(flag.to_string());
-        self
-    }
-
-    /// Allows settings another Cranelift flag defined by a flag name and value. This allows
-    /// fine-tuning of Cranelift settings.
-    ///
-    /// Since Cranelift flags may be unstable, this method should not be considered to be stable
-    /// either; other `Config` functions should be preferred for stability.
-    ///
-    /// # Safety
-    ///
-    /// This is marked as unsafe, because setting the wrong flag might break invariants,
-    /// resulting in execution hazards.
-    ///
-    /// # Errors
-    ///
-    /// The validation of the flags are deferred until the engine is being built, and thus may
-    /// cause `Engine::new` fail if the flag's name does not exist, or incompatible with other
-    /// settings.
-    ///
-    /// For example, feature `wasm_backtrace` will set `unwind_info` to `true`, but if it's
-    /// manually set to false then it will fail.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    #[cfg_attr(docsrs, doc(cfg(any(feature = "cranelift", feature = "winch"))))]
-    pub unsafe fn cranelift_flag_set(&mut self, name: &str, value: &str) -> &mut Self {
-        self.compiler_config
-            .settings
-            .insert(name.to_string(), value.to_string());
-        self
-    }
-
-    /// Loads cache configuration specified at `path`.
-    ///
-    /// This method will read the file specified by `path` on the filesystem and
-    /// attempt to load cache configuration from it. This method can also fail
-    /// due to I/O errors, misconfiguration, syntax errors, etc. For expected
-    /// syntax in the configuration file see the [documentation online][docs].
-    ///
-    /// By default cache configuration is not enabled or loaded.
-    ///
-    /// This method is only available when the `cache` feature of this crate is
-    /// enabled.
-    ///
-    /// # Errors
-    ///
-    /// This method can fail due to any error that happens when loading the file
-    /// pointed to by `path` and attempting to load the cache configuration.
-    ///
-    /// [docs]: https://bytecodealliance.github.io/wasmtime/cli-cache.html
-    #[cfg(feature = "cache")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "cache")))]
-    pub fn cache_config_load(&mut self, path: impl AsRef<Path>) -> Result<&mut Self> {
-        self.cache_config = CacheConfig::from_file(Some(path.as_ref()))?;
-        Ok(self)
-    }
-
-    /// Disable caching.
-    ///
-    /// Every call to [`Module::new(my_wasm)`][crate::Module::new] will
-    /// recompile `my_wasm`, even when it is unchanged.
-    ///
-    /// By default, new configs do not have caching enabled. This method is only
-    /// useful for disabling a previous cache configuration.
-    ///
-    /// This method is only available when the `cache` feature of this crate is
-    /// enabled.
-    #[cfg(feature = "cache")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "cache")))]
-    pub fn disable_cache(&mut self) -> &mut Self {
-        self.cache_config = CacheConfig::new_cache_disabled();
-        self
-    }
-
-    /// Loads cache configuration from the system default path.
-    ///
-    /// This commit is the same as [`Config::cache_config_load`] except that it
-    /// does not take a path argument and instead loads the default
-    /// configuration present on the system. This is located, for example, on
-    /// Unix at `$HOME/.config/wasmtime/config.toml` and is typically created
-    /// with the `wasmtime config new` command.
-    ///
-    /// By default cache configuration is not enabled or loaded.
-    ///
-    /// This method is only available when the `cache` feature of this crate is
-    /// enabled.
-    ///
-    /// # Errors
-    ///
-    /// This method can fail due to any error that happens when loading the
-    /// default system configuration. Note that it is not an error if the
-    /// default config file does not exist, in which case the default settings
-    /// for an enabled cache are applied.
-    ///
-    /// [docs]: https://bytecodealliance.github.io/wasmtime/cli-cache.html
-    #[cfg(feature = "cache")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "cache")))]
-    pub fn cache_config_load_default(&mut self) -> Result<&mut Self> {
-        self.cache_config = CacheConfig::from_file(None)?;
-        Ok(self)
-    }
-
-    /// Sets a custom memory creator.
-    ///
-    /// Custom memory creators are used when creating host `Memory` objects or when
-    /// creating instance linear memories for the on-demand instance allocation strategy.
-    #[cfg(feature = "runtime")]
-    pub fn with_host_memory(&mut self, mem_creator: Arc<dyn MemoryCreator>) -> &mut Self {
-        self.mem_creator = Some(Arc::new(MemoryCreatorProxy(mem_creator)));
-        self
-    }
-
-    /// Sets a custom stack creator.
-    ///
-    /// Custom memory creators are used when creating creating async instance stacks for
-    /// the on-demand instance allocation strategy.
-    #[cfg(feature = "async")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "async")))]
-    pub fn with_host_stack(&mut self, stack_creator: Arc<dyn StackCreator>) -> &mut Self {
-        self.stack_creator = Some(Arc::new(StackCreatorProxy(stack_creator)));
-        self
-    }
-
-    /// Sets the instance allocation strategy to use.
-    ///
-    /// When using the pooling instance allocation strategy, all linear memories
-    /// will be created as "static" and the
-    /// [`Config::static_memory_maximum_size`] and
-    /// [`Config::static_memory_guard_size`] options will be used to configure
-    /// the virtual memory allocations of linear memories.
-    pub fn allocation_strategy(&mut self, strategy: InstanceAllocationStrategy) -> &mut Self {
-        self.allocation_strategy = strategy;
-        self
-    }
-
-    /// Configures the maximum size, in bytes, where a linear memory is
-    /// considered static, above which it'll be considered dynamic.
-    ///
-    /// > Note: this value has important performance ramifications, be sure to
-    /// > understand what this value does before tweaking it and benchmarking.
-    ///
-    /// This function configures the threshold for wasm memories whether they're
-    /// implemented as a dynamically relocatable chunk of memory or a statically
-    /// located chunk of memory. The `max_size` parameter here is the size, in
-    /// bytes, where if the maximum size of a linear memory is below `max_size`
-    /// then it will be statically allocated with enough space to never have to
-    /// move. If the maximum size of a linear memory is larger than `max_size`
-    /// then wasm memory will be dynamically located and may move in memory
-    /// through growth operations.
-    ///
-    /// Specifying a `max_size` of 0 means that all memories will be dynamic and
-    /// may be relocated through `memory.grow`. Also note that if any wasm
-    /// memory's maximum size is below `max_size` then it will still reserve
-    /// `max_size` bytes in the virtual memory space.
-    ///
-    /// ## Static vs Dynamic Memory
-    ///
-    /// Linear memories represent contiguous arrays of bytes, but they can also
-    /// be grown through the API and wasm instructions. When memory is grown if
-    /// space hasn't been preallocated then growth may involve relocating the
-    /// base pointer in memory. Memories in Wasmtime are classified in two
-    /// different ways:
-    ///
-    /// * **static** - these memories preallocate all space necessary they'll
-    ///   ever need, meaning that the base pointer of these memories is never
-    ///   moved. Static memories may take more virtual memory space because of
-    ///   pre-reserving space for memories.
-    ///
-    /// * **dynamic** - these memories are not preallocated and may move during
-    ///   growth operations. Dynamic memories consume less virtual memory space
-    ///   because they don't need to preallocate space for future growth.
-    ///
-    /// Static memories can be optimized better in JIT code because once the
-    /// base address is loaded in a function it's known that we never need to
-    /// reload it because it never changes, `memory.grow` is generally a pretty
-    /// fast operation because the wasm memory is never relocated, and under
-    /// some conditions bounds checks can be elided on memory accesses.
-    ///
-    /// Dynamic memories can't be quite as heavily optimized because the base
-    /// address may need to be reloaded more often, they may require relocating
-    /// lots of data on `memory.grow`, and dynamic memories require
-    /// unconditional bounds checks on all memory accesses.
-    ///
-    /// ## Should you use static or dynamic memory?
-    ///
-    /// In general you probably don't need to change the value of this property.
-    /// The defaults here are optimized for each target platform to consume a
-    /// reasonable amount of physical memory while also generating speedy
-    /// machine code.
-    ///
-    /// One of the main reasons you may want to configure this today is if your
-    /// environment can't reserve virtual memory space for each wasm linear
-    /// memory. On 64-bit platforms wasm memories require a 6GB reservation by
-    /// default, and system limits may prevent this in some scenarios. In this
-    /// case you may wish to force memories to be allocated dynamically meaning
-    /// that the virtual memory footprint of creating a wasm memory should be
-    /// exactly what's used by the wasm itself.
-    ///
-    /// For 32-bit memories a static memory must contain at least 4GB of
-    /// reserved address space plus a guard page to elide any bounds checks at
-    /// all. Smaller static memories will use similar bounds checks as dynamic
-    /// memories.
-    ///
-    /// ## Default
-    ///
-    /// The default value for this property depends on the host platform. For
-    /// 64-bit platforms there's lots of address space available, so the default
-    /// configured here is 4GB. WebAssembly linear memories currently max out at
-    /// 4GB which means that on 64-bit platforms Wasmtime by default always uses
-    /// a static memory. This, coupled with a sufficiently sized guard region,
-    /// should produce the fastest JIT code on 64-bit platforms, but does
-    /// require a large address space reservation for each wasm memory.
-    ///
-    /// For 32-bit platforms this value defaults to 1GB. This means that wasm
-    /// memories whose maximum size is less than 1GB will be allocated
-    /// statically, otherwise they'll be considered dynamic.
-    ///
-    /// ## Static Memory and Pooled Instance Allocation
-    ///
-    /// When using the pooling instance allocator memories are considered to
-    /// always be static memories, they are never dynamic. This setting
-    /// configures the size of linear memory to reserve for each memory in the
-    /// pooling allocator.
-    ///
-    /// Note that the pooling allocator can reduce the amount of memory needed
-    /// for pooling allocation by using memory protection; see
-    /// `PoolingAllocatorConfig::memory_protection_keys` for details.
-    pub fn static_memory_maximum_size(&mut self, max_size: u64) -> &mut Self {
-        let max_pages = max_size / u64::from(wasmtime_environ::WASM_PAGE_SIZE);
-        self.tunables.static_memory_bound = Some(max_pages);
-        self
-    }
-
-    /// Indicates that the "static" style of memory should always be used.
-    ///
-    /// This configuration option enables selecting the "static" option for all
-    /// linear memories created within this `Config`. This means that all
-    /// memories will be allocated up-front and will never move. Additionally
-    /// this means that all memories are synthetically limited by the
-    /// [`Config::static_memory_maximum_size`] option, regardless of what the
-    /// actual maximum size is on the memory's original type.
-    ///
-    /// For the difference between static and dynamic memories, see the
-    /// [`Config::static_memory_maximum_size`].
-    pub fn static_memory_forced(&mut self, force: bool) -> &mut Self {
-        self.tunables.static_memory_bound_is_maximum = Some(force);
-        self
-    }
-
-    /// Configures the size, in bytes, of the guard region used at the end of a
-    /// static memory's address space reservation.
-    ///
-    /// > Note: this value has important performance ramifications, be sure to
-    /// > understand what this value does before tweaking it and benchmarking.
-    ///
-    /// All WebAssembly loads/stores are bounds-checked and generate a trap if
-    /// they're out-of-bounds. Loads and stores are often very performance
-    /// critical, so we want the bounds check to be as fast as possible!
-    /// Accelerating these memory accesses is the motivation for a guard after a
-    /// memory allocation.
-    ///
-    /// Memories (both static and dynamic) can be configured with a guard at the
-    /// end of them which consists of unmapped virtual memory. This unmapped
-    /// memory will trigger a memory access violation (e.g. segfault) if
-    /// accessed. This allows JIT code to elide bounds checks if it can prove
-    /// that an access, if out of bounds, would hit the guard region. This means
-    /// that having such a guard of unmapped memory can remove the need for
-    /// bounds checks in JIT code.
-    ///
-    /// For the difference between static and dynamic memories, see the
-    /// [`Config::static_memory_maximum_size`].
-    ///
-    /// ## How big should the guard be?
-    ///
-    /// In general, like with configuring `static_memory_maximum_size`, you
-    /// probably don't want to change this value from the defaults. Otherwise,
-    /// though, the size of the guard region affects the number of bounds checks
-    /// needed for generated wasm code. More specifically, loads/stores with
-    /// immediate offsets will generate bounds checks based on how big the guard
-    /// page is.
-    ///
-    /// For 32-bit wasm memories a 4GB static memory is required to even start
-    /// removing bounds checks. A 4GB guard size will guarantee that the module
-    /// has zero bounds checks for memory accesses. A 2GB guard size will
-    /// eliminate all bounds checks with an immediate offset less than 2GB. A
-    /// guard size of zero means that all memory accesses will still have bounds
-    /// checks.
-    ///
-    /// ## Default
-    ///
-    /// The default value for this property is 2GB on 64-bit platforms. This
-    /// allows eliminating almost all bounds checks on loads/stores with an
-    /// immediate offset of less than 2GB. On 32-bit platforms this defaults to
-    /// 64KB.
-    ///
-    /// ## Errors
-    ///
-    /// The `Engine::new` method will return an error if this option is smaller
-    /// than the value configured for [`Config::dynamic_memory_guard_size`].
-    pub fn static_memory_guard_size(&mut self, guard_size: u64) -> &mut Self {
-        let guard_size = round_up_to_pages(guard_size);
-        self.tunables.static_memory_offset_guard_size = Some(guard_size);
-        self
-    }
-
-    /// Configures the size, in bytes, of the guard region used at the end of a
-    /// dynamic memory's address space reservation.
-    ///
-    /// For the difference between static and dynamic memories, see the
-    /// [`Config::static_memory_maximum_size`]
-    ///
-    /// For more information about what a guard is, see the documentation on
-    /// [`Config::static_memory_guard_size`].
-    ///
-    /// Note that the size of the guard region for dynamic memories is not super
-    /// critical for performance. Making it reasonably-sized can improve
-    /// generated code slightly, but for maximum performance you'll want to lean
-    /// towards static memories rather than dynamic anyway.
-    ///
-    /// Also note that the dynamic memory guard size must be smaller than the
-    /// static memory guard size, so if a large dynamic memory guard is
-    /// specified then the static memory guard size will also be automatically
-    /// increased.
-    ///
-    /// ## Default
-    ///
-    /// This value defaults to 64KB.
-    ///
-    /// ## Errors
-    ///
-    /// The `Engine::new` method will return an error if this option is larger
-    /// than the value configured for [`Config::static_memory_guard_size`].
-    pub fn dynamic_memory_guard_size(&mut self, guard_size: u64) -> &mut Self {
-        let guard_size = round_up_to_pages(guard_size);
-        self.tunables.dynamic_memory_offset_guard_size = Some(guard_size);
-        self
-    }
-
-    /// Configures the size, in bytes, of the extra virtual memory space
-    /// reserved after a "dynamic" memory for growing into.
-    ///
-    /// For the difference between static and dynamic memories, see the
-    /// [`Config::static_memory_maximum_size`]
-    ///
-    /// Dynamic memories can be relocated in the process's virtual address space
-    /// on growth and do not always reserve their entire space up-front. This
-    /// means that a growth of the memory may require movement in the address
-    /// space, which in the worst case can copy a large number of bytes from one
-    /// region to another.
-    ///
-    /// This setting configures how many bytes are reserved after the initial
-    /// reservation for a dynamic memory for growing into. A value of 0 here
-    /// means that no extra bytes are reserved and all calls to `memory.grow`
-    /// will need to relocate the wasm linear memory (copying all the bytes). A
-    /// value of 1 megabyte, however, means that `memory.grow` can allocate up
-    /// to a megabyte of extra memory before the memory needs to be moved in
-    /// linear memory.
-    ///
-    /// Note that this is a currently simple heuristic for optimizing the growth
-    /// of dynamic memories, primarily implemented for the memory64 proposal
-    /// where all memories are currently "dynamic". This is unlikely to be a
-    /// one-size-fits-all style approach and if you're an embedder running into
-    /// issues with dynamic memories and growth and are interested in having
-    /// other growth strategies available here please feel free to [open an
-    /// issue on the Wasmtime repository][issue]!
-    ///
-    /// [issue]: https://github.com/bytecodealliance/wasmtime/issues/ne
-    ///
-    /// ## Default
-    ///
-    /// For 64-bit platforms this defaults to 2GB, and for 32-bit platforms this
-    /// defaults to 1MB.
-    pub fn dynamic_memory_reserved_for_growth(&mut self, reserved: u64) -> &mut Self {
-        self.tunables.dynamic_memory_growth_reserve = Some(round_up_to_pages(reserved));
-        self
-    }
-
-    /// Indicates whether a guard region is present before allocations of
-    /// linear memory.
-    ///
-    /// Guard regions before linear memories are never used during normal
-    /// operation of WebAssembly modules, even if they have out-of-bounds
-    /// loads. The only purpose for a preceding guard region in linear memory
-    /// is extra protection against possible bugs in code generators like
-    /// Cranelift. This setting does not affect performance in any way, but will
-    /// result in larger virtual memory reservations for linear memories (it
-    /// won't actually ever use more memory, just use more of the address
-    /// space).
-    ///
-    /// The size of the guard region before linear memory is the same as the
-    /// guard size that comes after linear memory, which is configured by
-    /// [`Config::static_memory_guard_size`] and
-    /// [`Config::dynamic_memory_guard_size`].
-    ///
-    /// ## Default
-    ///
-    /// This value defaults to `true`.
-    pub fn guard_before_linear_memory(&mut self, guard: bool) -> &mut Self {
-        self.tunables.guard_before_linear_memory = Some(guard);
-        self
-    }
-
-    /// Configure the version information used in serialized and deserialzied [`crate::Module`]s.
-    /// This effects the behavior of [`crate::Module::serialize()`], as well as
-    /// [`crate::Module::deserialize()`] and related functions.
-    ///
-    /// The default strategy is to use the wasmtime crate's Cargo package version.
-    pub fn module_version(&mut self, strategy: ModuleVersionStrategy) -> Result<&mut Self> {
-        match strategy {
-            // This case requires special precondition for assertion in SerializedModule::to_bytes
-            ModuleVersionStrategy::Custom(ref v) => {
-                if v.as_bytes().len() > 255 {
-                    bail!("custom module version cannot be more than 255 bytes: {}", v);
-                }
-            }
-            _ => {}
-        }
-        self.module_version = strategy;
-        Ok(self)
-    }
-
-    /// Configure wether wasmtime should compile a module using multiple
-    /// threads.
-    ///
-    /// Disabling this will result in a single thread being used to compile
-    /// the wasm bytecode.
-    ///
-    /// By default parallel compilation is enabled.
-    #[cfg(feature = "parallel-compilation")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "parallel-compilation")))]
-    pub fn parallel_compilation(&mut self, parallel: bool) -> &mut Self {
-        self.parallel_compilation = parallel;
-        self
-    }
-
-    /// Configures whether compiled artifacts will contain information to map
-    /// native program addresses back to the original wasm module.
-    ///
-    /// This configuration option is `true` by default and, if enabled,
-    /// generates the appropriate tables in compiled modules to map from native
-    /// address back to wasm source addresses. This is used for displaying wasm
-    /// program counters in backtraces as well as generating filenames/line
-    /// numbers if so configured as well (and the original wasm module has DWARF
-    /// debugging information present).
-    pub fn generate_address_map(&mut self, generate: bool) -> &mut Self {
-        self.tunables.generate_address_map = Some(generate);
-        self
-    }
-
-    /// Configures whether copy-on-write memory-mapped data is used to
-    /// initialize a linear memory.
-    ///
-    /// Initializing linear memory via a copy-on-write mapping can drastically
-    /// improve instantiation costs of a WebAssembly module because copying
-    /// memory is deferred. Additionally if a page of memory is only ever read
-    /// from WebAssembly and never written too then the same underlying page of
-    /// data will be reused between all instantiations of a module meaning that
-    /// if a module is instantiated many times this can lower the overall memory
-    /// required needed to run that module.
-    ///
-    /// The main disadvantage of copy-on-write initialization, however, is that
-    /// it may be possible for highly-parallel scenarios to be less scalable. If
-    /// a page is read initially by a WebAssembly module then that page will be
-    /// mapped to a read-only copy shared between all WebAssembly instances. If
-    /// the same page is then written, however, then a private copy is created
-    /// and swapped out from the read-only version. This also requires an [IPI],
-    /// however, which can be a significant bottleneck in high-parallelism
-    /// situations.
-    ///
-    /// This feature is only applicable when a WebAssembly module meets specific
-    /// criteria to be initialized in this fashion, such as:
-    ///
-    /// * Only memories defined in the module can be initialized this way.
-    /// * Data segments for memory must use statically known offsets.
-    /// * Data segments for memory must all be in-bounds.
-    ///
-    /// Modules which do not meet these criteria will fall back to
-    /// initialization of linear memory based on copying memory.
-    ///
-    /// This feature of Wasmtime is also platform-specific:
-    ///
-    /// * Linux - this feature is supported for all instances of [`Module`].
-    ///   Modules backed by an existing mmap (such as those created by
-    ///   [`Module::deserialize_file`]) will reuse that mmap to cow-initialize
-    ///   memory. Other instance of [`Module`] may use the `memfd_create`
-    ///   syscall to create an initialization image to `mmap`.
-    /// * Unix (not Linux) - this feature is only supported when loading modules
-    ///   from a precompiled file via [`Module::deserialize_file`] where there
-    ///   is a file descriptor to use to map data into the process. Note that
-    ///   the module must have been compiled with this setting enabled as well.
-    /// * Windows - there is no support for this feature at this time. Memory
-    ///   initialization will always copy bytes.
-    ///
-    /// By default this option is enabled.
-    ///
-    /// [`Module::deserialize_file`]: crate::Module::deserialize_file
-    /// [`Module`]: crate::Module
-    /// [IPI]: https://en.wikipedia.org/wiki/Inter-processor_interrupt
-    pub fn memory_init_cow(&mut self, enable: bool) -> &mut Self {
-        self.memory_init_cow = enable;
-        self
-    }
-
-    /// A configuration option to force the usage of `memfd_create` on Linux to
-    /// be used as the backing source for a module's initial memory image.
-    ///
-    /// When [`Config::memory_init_cow`] is enabled, which is enabled by
-    /// default, module memory initialization images are taken from a module's
-    /// original mmap if possible. If a precompiled module was loaded from disk
-    /// this means that the disk's file is used as an mmap source for the
-    /// initial linear memory contents. This option can be used to force, on
-    /// Linux, that instead of using the original file on disk a new in-memory
-    /// file is created with `memfd_create` to hold the contents of the initial
-    /// image.
-    ///
-    /// This option can be used to avoid possibly loading the contents of memory
-    /// from disk through a page fault. Instead with `memfd_create` the contents
-    /// of memory are always in RAM, meaning that even page faults which
-    /// initially populate a wasm linear memory will only work with RAM instead
-    /// of ever hitting the disk that the original precompiled module is stored
-    /// on.
-    ///
-    /// This option is disabled by default.
-    pub fn force_memory_init_memfd(&mut self, enable: bool) -> &mut Self {
-        self.force_memory_init_memfd = enable;
-        self
-    }
-
-    /// Configures whether or not a coredump should be generated and attached to
-    /// the anyhow::Error when a trap is raised.
-    ///
-    /// This option is disabled by default.
-    #[cfg(feature = "coredump")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "coredump")))]
-    pub fn coredump_on_trap(&mut self, enable: bool) -> &mut Self {
-        self.coredump_on_trap = enable;
-        self
-    }
-
-    /// Enables memory error checking for wasm programs.
-    ///
-    /// This option is disabled by default.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    pub fn wmemcheck(&mut self, enable: bool) -> &mut Self {
-        self.wmemcheck = enable;
-        self.compiler_config.wmemcheck = enable;
-        self
-    }
-
-    /// Configures the "guaranteed dense image size" for copy-on-write
-    /// initialized memories.
-    ///
-    /// When using the [`Config::memory_init_cow`] feature to initialize memory
-    /// efficiently (which is enabled by default), compiled modules contain an
-    /// image of the module's initial heap. If the module has a fairly sparse
-    /// initial heap, with just a few data segments at very different offsets,
-    /// this could result in a large region of zero bytes in the image. In
-    /// other words, it's not very memory-efficient.
-    ///
-    /// We normally use a heuristic to avoid this: if less than half
-    /// of the initialized range (first non-zero to last non-zero
-    /// byte) of any memory in the module has pages with nonzero
-    /// bytes, then we avoid creating a memory image for the entire module.
-    ///
-    /// However, if the embedder always needs the instantiation-time efficiency
-    /// of copy-on-write initialization, and is otherwise carefully controlling
-    /// parameters of the modules (for example, by limiting the maximum heap
-    /// size of the modules), then it may be desirable to ensure a memory image
-    /// is created even if this could go against the heuristic above. Thus, we
-    /// add another condition: there is a size of initialized data region up to
-    /// which we *always* allow a memory image. The embedder can set this to a
-    /// known maximum heap size if they desire to always get the benefits of
-    /// copy-on-write images.
-    ///
-    /// In the future we may implement a "best of both worlds"
-    /// solution where we have a dense image up to some limit, and
-    /// then support a sparse list of initializers beyond that; this
-    /// would get most of the benefit of copy-on-write and pay the incremental
-    /// cost of eager initialization only for those bits of memory
-    /// that are out-of-bounds. However, for now, an embedder desiring
-    /// fast instantiation should ensure that this setting is as large
-    /// as the maximum module initial memory content size.
-    ///
-    /// By default this value is 16 MiB.
-    pub fn memory_guaranteed_dense_image_size(&mut self, size_in_bytes: u64) -> &mut Self {
-        self.memory_guaranteed_dense_image_size = size_in_bytes;
-        self
-    }
-
-    pub(crate) fn validate(&self) -> Result<Tunables> {
-        if self.features.reference_types && !self.features.bulk_memory {
-            bail!("feature 'reference_types' requires 'bulk_memory' to be enabled");
-        }
-        if self.features.threads && !self.features.bulk_memory {
-            bail!("feature 'threads' requires 'bulk_memory' to be enabled");
-        }
-        if self.features.function_references && !self.features.reference_types {
-            bail!("feature 'function_references' requires 'reference_types' to be enabled");
-        }
-        if self.features.gc && !self.features.function_references {
-            bail!("feature 'gc' requires 'function_references' to be enabled");
-        }
-        #[cfg(feature = "async")]
-        if self.async_support && self.max_wasm_stack > self.async_stack_size {
-            bail!("max_wasm_stack size cannot exceed the async_stack_size");
-        }
-        if self.max_wasm_stack == 0 {
-            bail!("max_wasm_stack size cannot be zero");
-        }
-        #[cfg(not(feature = "wmemcheck"))]
-        if self.wmemcheck {
-            bail!("wmemcheck (memory checker) was requested but is not enabled in this build");
-        }
-
-        #[cfg(not(any(feature = "cranelift", feature = "winch")))]
-        let mut tunables = Tunables::default_host();
-        #[cfg(any(feature = "cranelift", feature = "winch"))]
-        let mut tunables = match &self.compiler_config.target.as_ref() {
-            Some(target) => Tunables::default_for_target(target)?,
-            None => Tunables::default_host(),
-        };
-
-        macro_rules! set_fields {
-            ($($field:ident)*) => (
-                let ConfigTunables {
-                    $($field,)*
-                } = &self.tunables;
-
-                $(
-                    if let Some(e) = $field {
-                        tunables.$field = *e;
-                    }
-                )*
-            )
-        }
-
-        set_fields! {
-            static_memory_bound
-            static_memory_offset_guard_size
-            dynamic_memory_offset_guard_size
-            dynamic_memory_growth_reserve
-            generate_native_debuginfo
-            parse_wasm_debuginfo
-            consume_fuel
-            epoch_interruption
-            static_memory_bound_is_maximum
-            guard_before_linear_memory
-            generate_address_map
-            debug_adapter_modules
-            relaxed_simd_deterministic
-            tail_callable
-        }
-
-        // If we're going to compile with winch, we must use the winch calling convention.
-        #[cfg(any(feature = "cranelift", feature = "winch"))]
-        {
-            tunables.winch_callable = match self.compiler_config.strategy {
-                Strategy::Auto => !cfg!(feature = "cranelift") && cfg!(feature = "winch"),
-                Strategy::Cranelift => false,
-                Strategy::Winch => true,
-            };
-        }
-
-        if tunables.static_memory_offset_guard_size < tunables.dynamic_memory_offset_guard_size {
-            bail!("static memory guard size cannot be smaller than dynamic memory guard size");
-        }
-        Ok(tunables)
-    }
-
-    #[cfg(feature = "runtime")]
-    pub(crate) fn build_allocator(
-        &self,
-        tunables: &Tunables,
-    ) -> Result<Box<dyn InstanceAllocator + Send + Sync>> {
-        #[cfg(feature = "async")]
-        let stack_size = self.async_stack_size;
-
-        #[cfg(not(feature = "async"))]
-        let stack_size = 0;
-
-        let _ = tunables;
-
-        match &self.allocation_strategy {
-            InstanceAllocationStrategy::OnDemand => {
-                #[allow(unused_mut)]
-                let mut allocator = Box::new(OnDemandInstanceAllocator::new(
-                    self.mem_creator.clone(),
-                    stack_size,
-                ));
-                #[cfg(feature = "async")]
-                if let Some(stack_creator) = &self.stack_creator {
-                    allocator.set_stack_creator(stack_creator.clone());
-                }
-                Ok(allocator)
-            }
-            #[cfg(feature = "pooling-allocator")]
-            InstanceAllocationStrategy::Pooling(config) => {
-                let mut config = config.config;
-                config.stack_size = stack_size;
-                Ok(Box::new(wasmtime_runtime::PoolingInstanceAllocator::new(
-                    &config, tunables,
-                )?))
-            }
-        }
-    }
-
-    #[cfg(feature = "runtime")]
-    pub(crate) fn build_gc_runtime(&self) -> Result<Arc<dyn GcRuntime>> {
-        Ok(Arc::new(wasmtime_runtime::default_gc_runtime()) as Arc<dyn GcRuntime>)
-    }
-
-    #[cfg(feature = "runtime")]
-    pub(crate) fn build_profiler(&self) -> Result<Box<dyn ProfilingAgent>> {
-        Ok(match self.profiling_strategy {
-            ProfilingStrategy::PerfMap => profiling_agent::new_perfmap()?,
-            ProfilingStrategy::JitDump => profiling_agent::new_jitdump()?,
-            ProfilingStrategy::VTune => profiling_agent::new_vtune()?,
-            ProfilingStrategy::None => profiling_agent::new_null(),
-        })
-    }
-
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    pub(crate) fn build_compiler(
-        mut self,
-        tunables: &Tunables,
-    ) -> Result<(Self, Box<dyn wasmtime_environ::Compiler>)> {
-        let target = self.compiler_config.target.clone();
-
-        let mut compiler = match self.compiler_config.strategy {
-            #[cfg(feature = "cranelift")]
-            Strategy::Auto => wasmtime_cranelift::builder(target)?,
-            #[cfg(all(feature = "winch", not(feature = "cranelift")))]
-            Strategy::Auto => wasmtime_winch::builder(target)?,
-            #[cfg(feature = "cranelift")]
-            Strategy::Cranelift => wasmtime_cranelift::builder(target)?,
-            #[cfg(not(feature = "cranelift"))]
-            Strategy::Cranelift => bail!("cranelift support not compiled in"),
-            #[cfg(feature = "winch")]
-            Strategy::Winch => wasmtime_winch::builder(target)?,
-            #[cfg(not(feature = "winch"))]
-            Strategy::Winch => bail!("winch support not compiled in"),
-        };
-
-        if let Some(path) = &self.compiler_config.clif_dir {
-            compiler.clif_dir(path)?;
-        }
-
-        // If probestack is enabled for a target, Wasmtime will always use the
-        // inline strategy which doesn't require us to define a `__probestack`
-        // function or similar.
-        self.compiler_config
-            .settings
-            .insert("probestack_strategy".into(), "inline".into());
-
-        let host = target_lexicon::Triple::host();
-        let target = self
-            .compiler_config
-            .target
-            .as_ref()
-            .unwrap_or(&host)
-            .clone();
-
-        // On supported targets, we enable stack probing by default.
-        // This is required on Windows because of the way Windows
-        // commits its stacks, but it's also a good idea on other
-        // platforms to ensure guard pages are hit for large frame
-        // sizes.
-        if probestack_supported(target.architecture) {
-            self.compiler_config
-                .flags
-                .insert("enable_probestack".into());
-        }
-
-        if self.features.tail_call {
-            ensure!(
-                target.architecture != Architecture::S390x,
-                "Tail calls are not supported on s390x yet: \
-                 https://github.com/bytecodealliance/wasmtime/issues/6530"
-            );
-        }
-
-        if let Some(unwind_requested) = self.native_unwind_info {
-            if !self
-                .compiler_config
-                .ensure_setting_unset_or_given("unwind_info", &unwind_requested.to_string())
-            {
-                bail!("incompatible settings requested for Cranelift and Wasmtime `unwind-info` settings");
-            }
-        }
-
-        if target.operating_system == target_lexicon::OperatingSystem::Windows {
-            if !self
-                .compiler_config
-                .ensure_setting_unset_or_given("unwind_info", "true")
-            {
-                bail!("`native_unwind_info` cannot be disabled on Windows");
-            }
-        }
-
-        // We require frame pointers for correct stack walking, which is safety
-        // critical in the presence of reference types, and otherwise it is just
-        // really bad developer experience to get wrong.
-        self.compiler_config
-            .settings
-            .insert("preserve_frame_pointers".into(), "true".into());
-
-        // check for incompatible compiler options and set required values
-        if self.features.reference_types {
-            if !self
-                .compiler_config
-                .ensure_setting_unset_or_given("enable_safepoints", "true")
-            {
-                bail!("compiler option 'enable_safepoints' must be enabled when 'reference types' is enabled");
-            }
-        }
-
-        if self.features.relaxed_simd && !self.features.simd {
-            bail!("cannot disable the simd proposal but enable the relaxed simd proposal");
-        }
-
-        // Apply compiler settings and flags
-        for (k, v) in self.compiler_config.settings.iter() {
-            compiler.set(k, v)?;
-        }
-        for flag in self.compiler_config.flags.iter() {
-            compiler.enable(flag)?;
-        }
-
-        #[cfg(feature = "incremental-cache")]
-        if let Some(cache_store) = &self.compiler_config.cache_store {
-            compiler.enable_incremental_compilation(cache_store.clone())?;
-        }
-
-        compiler.set_tunables(tunables.clone())?;
-        compiler.wmemcheck(self.compiler_config.wmemcheck);
-
-        Ok((self, compiler.build()?))
-    }
-
-    /// Internal setting for whether adapter modules for components will have
-    /// extra WebAssembly instructions inserted performing more debug checks
-    /// then are necessary.
-    #[cfg(feature = "component-model")]
-    pub fn debug_adapter_modules(&mut self, debug: bool) -> &mut Self {
-        self.tunables.debug_adapter_modules = Some(debug);
-        self
-    }
-
-    /// Enables clif output when compiling a WebAssembly module.
-    #[cfg(any(feature = "cranelift", feature = "winch"))]
-    pub fn emit_clif(&mut self, path: &Path) -> &mut Self {
-        self.compiler_config.clif_dir = Some(path.to_path_buf());
-        self
-    }
-
-    /// Configures whether, when on macOS, Mach ports are used for exception
-    /// handling instead of traditional Unix-based signal handling.
-    ///
-    /// WebAssembly traps in Wasmtime are implemented with native faults, for
-    /// example a `SIGSEGV` will occur when a WebAssembly guest accesses
-    /// out-of-bounds memory. Handling this can be configured to either use Unix
-    /// signals or Mach ports on macOS. By default Mach ports are used.
-    ///
-    /// Mach ports enable Wasmtime to work by default with foreign
-    /// error-handling systems such as breakpad which also use Mach ports to
-    /// handle signals. In this situation Wasmtime will continue to handle guest
-    /// faults gracefully while any non-guest faults will get forwarded to
-    /// process-level handlers such as breakpad. Some more background on this
-    /// can be found in #2456.
-    ///
-    /// A downside of using mach ports, however, is that they don't interact
-    /// well with `fork()`. Forking a Wasmtime process on macOS will produce a
-    /// child process that cannot successfully run WebAssembly. In this
-    /// situation traditional Unix signal handling should be used as that's
-    /// inherited and works across forks.
-    ///
-    /// If your embedding wants to use a custom error handler which leverages
-    /// Mach ports and you additionally wish to `fork()` the process and use
-    /// Wasmtime in the child process that's not currently possible. Please
-    /// reach out to us if you're in this bucket!
-    ///
-    /// This option defaults to `true`, using Mach ports by default.
-    pub fn macos_use_mach_ports(&mut self, mach_ports: bool) -> &mut Self {
-        self.macos_use_mach_ports = mach_ports;
-        self
-    }
-}
-
-/// If building without the runtime feature we can't determine the page size of
-/// the platform where the execution will happen so just keep the original
-/// values.
-#[cfg(not(feature = "runtime"))]
-fn round_up_to_pages(val: u64) -> u64 {
-    val
-}
-
-#[cfg(feature = "runtime")]
-fn round_up_to_pages(val: u64) -> u64 {
-    let page_size = wasmtime_runtime::page_size() as u64;
-    debug_assert!(page_size.is_power_of_two());
-    val.checked_add(page_size - 1)
-        .map(|val| val & !(page_size - 1))
-        .unwrap_or(u64::MAX / page_size + 1)
-}
-
-impl Default for Config {
-    fn default() -> Config {
-        Config::new()
-    }
-}
-
-impl fmt::Debug for Config {
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        let mut f = f.debug_struct("Config");
-        f.field("debug_info", &self.tunables.generate_native_debuginfo)
-            .field("wasm_threads", &self.features.threads)
-            .field("wasm_reference_types", &self.features.reference_types)
-            .field(
-                "wasm_function_references",
-                &self.features.function_references,
-            )
-            .field("wasm_gc", &self.features.gc)
-            .field("wasm_bulk_memory", &self.features.bulk_memory)
-            .field("wasm_simd", &self.features.simd)
-            .field("wasm_relaxed_simd", &self.features.relaxed_simd)
-            .field("wasm_multi_value", &self.features.multi_value)
-            .field("parallel_compilation", &self.parallel_compilation);
-        #[cfg(any(feature = "cranelift", feature = "winch"))]
-        {
-            f.field("compiler_config", &self.compiler_config);
-        }
-
-        if let Some(enable) = self.tunables.parse_wasm_debuginfo {
-            f.field("parse_wasm_debuginfo", &enable);
-        }
-        if let Some(size) = self.tunables.static_memory_bound {
-            f.field(
-                "static_memory_maximum_size",
-                &(u64::from(size) * u64::from(wasmtime_environ::WASM_PAGE_SIZE)),
-            );
-        }
-        if let Some(size) = self.tunables.static_memory_offset_guard_size {
-            f.field("static_memory_guard_size", &size);
-        }
-        if let Some(size) = self.tunables.dynamic_memory_offset_guard_size {
-            f.field("dynamic_memory_guard_size", &size);
-        }
-        if let Some(enable) = self.tunables.guard_before_linear_memory {
-            f.field("guard_before_linear_memory", &enable);
-        }
-        f.finish()
-    }
-}
-
-/// Possible Compilation strategies for a wasm module.
-///
-/// This is used as an argument to the [`Config::strategy`] method.
-#[non_exhaustive]
-#[derive(PartialEq, Eq, Clone, Debug, Copy)]
-pub enum Strategy {
-    /// An indicator that the compilation strategy should be automatically
-    /// selected.
-    ///
-    /// This is generally what you want for most projects and indicates that the
-    /// `wasmtime` crate itself should make the decision about what the best
-    /// code generator for a wasm module is.
-    ///
-    /// Currently this always defaults to Cranelift, but the default value may
-    /// change over time.
-    Auto,
-
-    /// Currently the default backend, Cranelift aims to be a reasonably fast
-    /// code generator which generates high quality machine code.
-    Cranelift,
-
-    /// A baseline compiler for WebAssembly, currently under active development and not ready for
-    /// production applications.
-    Winch,
-}
-
-/// Possible optimization levels for the Cranelift codegen backend.
-#[non_exhaustive]
-#[derive(Copy, Clone, Debug, Serialize, Deserialize, Eq, PartialEq)]
-pub enum OptLevel {
-    /// No optimizations performed, minimizes compilation time by disabling most
-    /// optimizations.
-    None,
-    /// Generates the fastest possible code, but may take longer.
-    Speed,
-    /// Similar to `speed`, but also performs transformations aimed at reducing
-    /// code size.
-    SpeedAndSize,
-}
-
-/// Select which profiling technique to support.
-#[derive(Debug, Clone, Copy, PartialEq)]
-pub enum ProfilingStrategy {
-    /// No profiler support.
-    None,
-
-    /// Collect function name information as the "perf map" file format, used with `perf` on Linux.
-    PerfMap,
-
-    /// Collect profiling info for "jitdump" file format, used with `perf` on
-    /// Linux.
-    JitDump,
-
-    /// Collect profiling info using the "ittapi", used with `VTune` on Linux.
-    VTune,
-}
-
-/// Select how wasm backtrace detailed information is handled.
-#[derive(Debug, Clone, Copy)]
-pub enum WasmBacktraceDetails {
-    /// Support is unconditionally enabled and wasmtime will parse and read
-    /// debug information.
-    Enable,
-
-    /// Support is disabled, and wasmtime will not parse debug information for
-    /// backtrace details.
-    Disable,
-
-    /// Support for backtrace details is conditional on the
-    /// `WASMTIME_BACKTRACE_DETAILS` environment variable.
-    Environment,
-}
-
-/// Configuration options used with [`InstanceAllocationStrategy::Pooling`] to
-/// change the behavior of the pooling instance allocator.
-///
-/// This structure has a builder-style API in the same manner as [`Config`] and
-/// is configured with [`Config::allocation_strategy`].
-///
-/// Note that usage of the pooling allocator does not affect compiled
-/// WebAssembly code. Compiled `*.cwasm` files, for example, are usable both
-/// with and without the pooling allocator.
-///
-/// ## Advantages of Pooled Allocation
-///
-/// The main benefit of the pooling allocator is to make WebAssembly
-/// instantiation both faster and more scalable in terms of parallelism.
-/// Allocation is faster because virtual memory is already configured and ready
-/// to go within the pool, there's no need to [`mmap`] (for example on Unix) a
-/// new region and configure it with guard pages. By avoiding [`mmap`] this
-/// avoids whole-process virtual memory locks which can improve scalability and
-/// performance through avoiding this.
-///
-/// Additionally with pooled allocation it's possible to create "affine slots"
-/// to a particular WebAssembly module or component over time. For example if
-/// the same module is multiple times over time the pooling allocator will, by
-/// default, attempt to reuse the same slot. This mean that the slot has been
-/// pre-configured and can retain virtual memory mappings for a copy-on-write
-/// image, for example (see [`Config::memory_init_cow`] for more information.
-/// This means that in a steady state instance deallocation is a single
-/// [`madvise`] to reset linear memory to its original contents followed by a
-/// single (optional) [`mprotect`] during the next instantiation to shrink
-/// memory back to its original size. Compared to non-pooled allocation this
-/// avoids the need to [`mmap`] a new region of memory, [`munmap`] it, and
-/// [`mprotect`] regions too.
-///
-/// Another benefit of pooled allocation is that it's possible to configure
-/// things such that no virtual memory management is required at all in a steady
-/// state. For example a pooling allocator can be configured with
-/// [`Config::memory_init_cow`] disabledd, dynamic bounds checks enabled
-/// through
-/// [`Config::static_memory_maximum_size(0)`](Config::static_memory_maximum_size),
-/// and sufficient space through
-/// [`PoolingAllocationConfig::table_keep_resident`] /
-/// [`PoolingAllocationConfig::linear_memory_keep_resident`]. With all these
-/// options in place no virtual memory tricks are used at all and everything is
-/// manually managed by Wasmtime (for example resetting memory is a
-/// `memset(0)`). This is not as fast in a single-threaded scenario but can
-/// provide benefits in high-parallelism situations as no virtual memory locks
-/// or IPIs need happen.
-///
-/// ## Disadvantages of Pooled Allocation
-///
-/// Despite the above advantages to instantiation performance the pooling
-/// allocator is not enabled by default in Wasmtime. One reason is that the
-/// performance advantages are not necessarily portable, for example while the
-/// pooling allocator works on Windows it has not been tuned for performance on
-/// Windows in the same way it has on Linux.
-///
-/// Additionally the main cost of the pooling allocator is that it requires a
-/// very large reservation of virtual memory (on the order of most of the
-/// addressable virtual address space). WebAssembly 32-bit linear memories in
-/// Wasmtime are, by default 4G address space reservations with a 2G guard
-/// region both before and after the linear memory. Memories in the pooling
-/// allocator are contiguous which means that we only need a guard after linear
-/// memory because the previous linear memory's slot post-guard is our own
-/// pre-guard. This means that, by default, the pooling allocator uses 6G of
-/// virtual memory per WebAssembly linear memory slot. 6G of virtual memory is
-/// 32.5 bits of a 64-bit address. Many 64-bit systems can only actually use
-/// 48-bit addresses by default (although this can be extended on architectures
-/// nowadays too), and of those 48 bits one of them is reserved to indicate
-/// kernel-vs-userspace. This leaves 47-32.5=14.5 bits left, meaning you can
-/// only have at most 64k slots of linear memories on many systems by default.
-/// This is a relatively small number and shows how the pooling allocator can
-/// quickly exhaust all of virtual memory.
-///
-/// Another disadvantage of the pooling allocator is that it may keep memory
-/// alive when nothing is using it. A previously used slot for an instance might
-/// have paged-in memory that will not get paged out until the
-/// [`Engine`](crate::Engine) owning the pooling allocator is dropped. While
-/// suitable for some applications this behavior may not be suitable for all
-/// applications.
-///
-/// Finally the last disadvantage of the pooling allocator is that the
-/// configuration values for the maximum number of instances, memories, tables,
-/// etc, must all be fixed up-front. There's not always a clear answer as to
-/// what these values should be so not all applications may be able to work
-/// with this constraint.
-///
-/// [`madvise`]: https://man7.org/linux/man-pages/man2/madvise.2.html
-/// [`mprotect`]: https://man7.org/linux/man-pages/man2/mprotect.2.html
-/// [`mmap`]: https://man7.org/linux/man-pages/man2/mmap.2.html
-/// [`munmap`]: https://man7.org/linux/man-pages/man2/munmap.2.html
-#[cfg(feature = "pooling-allocator")]
-#[derive(Debug, Clone, Default)]
-pub struct PoolingAllocationConfig {
-    config: wasmtime_runtime::PoolingInstanceAllocatorConfig,
-}
-
-#[cfg(feature = "pooling-allocator")]
-impl PoolingAllocationConfig {
-    /// Configures the maximum number of "unused warm slots" to retain in the
-    /// pooling allocator.
-    ///
-    /// The pooling allocator operates over slots to allocate from, and each
-    /// slot is considered "cold" if it's never been used before or "warm" if
-    /// it's been used by some module in the past. Slots in the pooling
-    /// allocator additionally track an "affinity" flag to a particular core
-    /// wasm module. When a module is instantiated into a slot then the slot is
-    /// considered affine to that module, even after the instance has been
-    /// deallocated.
-    ///
-    /// When a new instance is created then a slot must be chosen, and the
-    /// current algorithm for selecting a slot is:
-    ///
-    /// * If there are slots that are affine to the module being instantiated,
-    ///   then the most recently used slot is selected to be allocated from.
-    ///   This is done to improve reuse of resources such as memory mappings and
-    ///   additionally try to benefit from temporal locality for things like
-    ///   caches.
-    ///
-    /// * Otherwise if there are more than N affine slots to other modules, then
-    ///   one of those affine slots is chosen to be allocated. The slot chosen
-    ///   is picked on a least-recently-used basis.
-    ///
-    /// * Finally, if there are less than N affine slots to other modules, then
-    ///   the non-affine slots are allocated from.
-    ///
-    /// This setting, `max_unused_warm_slots`, is the value for N in the above
-    /// algorithm. The purpose of this setting is to have a knob over the RSS
-    /// impact of "unused slots" for a long-running wasm server.
-    ///
-    /// If this setting is set to 0, for example, then affine slots are
-    /// aggressively reused on a least-recently-used basis. A "cold" slot is
-    /// only used if there are no affine slots available to allocate from. This
-    /// means that the set of slots used over the lifetime of a program is the
-    /// same as the maximum concurrent number of wasm instances.
-    ///
-    /// If this setting is set to infinity, however, then cold slots are
-    /// prioritized to be allocated from. This means that the set of slots used
-    /// over the lifetime of a program will approach
-    /// [`PoolingAllocationConfig::total_memories`], or the maximum number of
-    /// slots in the pooling allocator.
-    ///
-    /// Wasmtime does not aggressively decommit all resources associated with a
-    /// slot when the slot is not in use. For example the
-    /// [`PoolingAllocationConfig::linear_memory_keep_resident`] option can be
-    /// used to keep memory associated with a slot, even when it's not in use.
-    /// This means that the total set of used slots in the pooling instance
-    /// allocator can impact the overall RSS usage of a program.
-    ///
-    /// The default value for this option is `100`.
-    pub fn max_unused_warm_slots(&mut self, max: u32) -> &mut Self {
-        self.config.max_unused_warm_slots = max;
-        self
-    }
-
-    /// Configures whether or not stacks used for async futures are reset to
-    /// zero after usage.
-    ///
-    /// When the [`async_support`](Config::async_support) method is enabled for
-    /// Wasmtime and the [`call_async`] variant
-    /// of calling WebAssembly is used then Wasmtime will create a separate
-    /// runtime execution stack for each future produced by [`call_async`].
-    /// During the deallocation process Wasmtime won't by default reset the
-    /// contents of the stack back to zero.
-    ///
-    /// When this option is enabled it can be seen as a defense-in-depth
-    /// mechanism to reset a stack back to zero. This is not required for
-    /// correctness and can be a costly operation in highly concurrent
-    /// environments due to modifications of the virtual address space requiring
-    /// process-wide synchronization.
-    ///
-    /// This option defaults to `false`.
-    ///
-    /// [`call_async`]: crate::TypedFunc::call_async
-    #[cfg(feature = "async")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "async")))]
-    pub fn async_stack_zeroing(&mut self, enable: bool) -> &mut Self {
-        self.config.async_stack_zeroing = enable;
-        self
-    }
-
-    /// How much memory, in bytes, to keep resident for async stacks allocated
-    /// with the pooling allocator.
-    ///
-    /// When [`PoolingAllocationConfig::async_stack_zeroing`] is enabled then
-    /// Wasmtime will reset the contents of async stacks back to zero upon
-    /// deallocation. This option can be used to perform the zeroing operation
-    /// with `memset` up to a certain threshold of bytes instead of using system
-    /// calls to reset the stack to zero.
-    ///
-    /// Note that when using this option the memory with async stacks will
-    /// never be decommitted.
-    #[cfg(feature = "async")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "async")))]
-    pub fn async_stack_keep_resident(&mut self, size: usize) -> &mut Self {
-        let size = round_up_to_pages(size as u64) as usize;
-        self.config.async_stack_keep_resident = size;
-        self
-    }
-
-    /// How much memory, in bytes, to keep resident for each linear memory
-    /// after deallocation.
-    ///
-    /// This option is only applicable on Linux and has no effect on other
-    /// platforms.
-    ///
-    /// By default Wasmtime will use `madvise` to reset the entire contents of
-    /// linear memory back to zero when a linear memory is deallocated. This
-    /// option can be used to use `memset` instead to set memory back to zero
-    /// which can, in some configurations, reduce the number of page faults
-    /// taken when a slot is reused.
-    pub fn linear_memory_keep_resident(&mut self, size: usize) -> &mut Self {
-        let size = round_up_to_pages(size as u64) as usize;
-        self.config.linear_memory_keep_resident = size;
-        self
-    }
-
-    /// How much memory, in bytes, to keep resident for each table after
-    /// deallocation.
-    ///
-    /// This option is only applicable on Linux and has no effect on other
-    /// platforms.
-    ///
-    /// This option is the same as
-    /// [`PoolingAllocationConfig::linear_memory_keep_resident`] except that it
-    /// is applicable to tables instead.
-    pub fn table_keep_resident(&mut self, size: usize) -> &mut Self {
-        let size = round_up_to_pages(size as u64) as usize;
-        self.config.table_keep_resident = size;
-        self
-    }
-
-    /// The maximum number of concurrent component instances supported (default
-    /// is `1000`).
-    ///
-    /// This provides an upper-bound on the total size of component
-    /// metadata-related allocations, along with
-    /// [`PoolingAllocationConfig::max_component_instance_size`]. The upper bound is
-    ///
-    /// ```text
-    /// total_component_instances * max_component_instance_size
-    /// ```
-    ///
-    /// where `max_component_instance_size` is rounded up to the size and alignment
-    /// of the internal representation of the metadata.
-    pub fn total_component_instances(&mut self, count: u32) -> &mut Self {
-        self.config.limits.total_component_instances = count;
-        self
-    }
-
-    /// The maximum size, in bytes, allocated for a component instance's
-    /// `VMComponentContext` metadata.
-    ///
-    /// The [`wasmtime::component::Instance`][crate::component::Instance] type
-    /// has a static size but its internal `VMComponentContext` is dynamically
-    /// sized depending on the component being instantiated. This size limit
-    /// loosely correlates to the size of the component, taking into account
-    /// factors such as:
-    ///
-    /// * number of lifted and lowered functions,
-    /// * number of memories
-    /// * number of inner instances
-    /// * number of resources
-    ///
-    /// If the allocated size per instance is too small then instantiation of a
-    /// module will fail at runtime with an error indicating how many bytes were
-    /// needed.
-    ///
-    /// The default value for this is 1MiB.
-    ///
-    /// This provides an upper-bound on the total size of component
-    /// metadata-related allocations, along with
-    /// [`PoolingAllocationConfig::total_component_instances`]. The upper bound is
-    ///
-    /// ```text
-    /// total_component_instances * max_component_instance_size
-    /// ```
-    ///
-    /// where `max_component_instance_size` is rounded up to the size and alignment
-    /// of the internal representation of the metadata.
-    pub fn max_component_instance_size(&mut self, size: usize) -> &mut Self {
-        self.config.limits.component_instance_size = size;
-        self
-    }
-
-    /// The maximum number of core instances a single component may contain
-    /// (default is `20`).
-    ///
-    /// This method (along with
-    /// [`PoolingAllocationConfig::max_memories_per_component`],
-    /// [`PoolingAllocationConfig::max_tables_per_component`], and
-    /// [`PoolingAllocationConfig::max_component_instance_size`]) allows you to cap
-    /// the amount of resources a single component allocation consumes.
-    ///
-    /// If a component will instantiate more core instances than `count`, then
-    /// the component will fail to instantiate.
-    pub fn max_core_instances_per_component(&mut self, count: u32) -> &mut Self {
-        self.config.limits.max_core_instances_per_component = count;
-        self
-    }
-
-    /// The maximum number of Wasm linear memories that a single component may
-    /// transitively contain (default is `20`).
-    ///
-    /// This method (along with
-    /// [`PoolingAllocationConfig::max_core_instances_per_component`],
-    /// [`PoolingAllocationConfig::max_tables_per_component`], and
-    /// [`PoolingAllocationConfig::max_component_instance_size`]) allows you to cap
-    /// the amount of resources a single component allocation consumes.
-    ///
-    /// If a component transitively contains more linear memories than `count`,
-    /// then the component will fail to instantiate.
-    pub fn max_memories_per_component(&mut self, count: u32) -> &mut Self {
-        self.config.limits.max_memories_per_component = count;
-        self
-    }
-
-    /// The maximum number of tables that a single component may transitively
-    /// contain (default is `20`).
-    ///
-    /// This method (along with
-    /// [`PoolingAllocationConfig::max_core_instances_per_component`],
-    /// [`PoolingAllocationConfig::max_memories_per_component`],
-    /// [`PoolingAllocationConfig::max_component_instance_size`]) allows you to cap
-    /// the amount of resources a single component allocation consumes.
-    ///
-    /// If a component will transitively contains more tables than `count`, then
-    /// the component will fail to instantiate.
-    pub fn max_tables_per_component(&mut self, count: u32) -> &mut Self {
-        self.config.limits.max_tables_per_component = count;
-        self
-    }
-
-    /// The maximum number of concurrent Wasm linear memories supported (default
-    /// is `1000`).
-    ///
-    /// This value has a direct impact on the amount of memory allocated by the pooling
-    /// instance allocator.
-    ///
-    /// The pooling instance allocator allocates a memory pool, where each entry
-    /// in the pool contains the reserved address space for each linear memory
-    /// supported by an instance.
-    ///
-    /// The memory pool will reserve a large quantity of host process address
-    /// space to elide the bounds checks required for correct WebAssembly memory
-    /// semantics. Even with 64-bit address spaces, the address space is limited
-    /// when dealing with a large number of linear memories.
-    ///
-    /// For example, on Linux x86_64, the userland address space limit is 128
-    /// TiB. That might seem like a lot, but each linear memory will *reserve* 6
-    /// GiB of space by default.
-    pub fn total_memories(&mut self, count: u32) -> &mut Self {
-        self.config.limits.total_memories = count;
-        self
-    }
-
-    /// The maximum number of concurrent tables supported (default is `1000`).
-    ///
-    /// This value has a direct impact on the amount of memory allocated by the
-    /// pooling instance allocator.
-    ///
-    /// The pooling instance allocator allocates a table pool, where each entry
-    /// in the pool contains the space needed for each WebAssembly table
-    /// supported by an instance (see `table_elements` to control the size of
-    /// each table).
-    pub fn total_tables(&mut self, count: u32) -> &mut Self {
-        self.config.limits.total_tables = count;
-        self
-    }
-
-    /// The maximum number of execution stacks allowed for asynchronous
-    /// execution, when enabled (default is `1000`).
-    ///
-    /// This value has a direct impact on the amount of memory allocated by the
-    /// pooling instance allocator.
-    #[cfg(feature = "async")]
-    pub fn total_stacks(&mut self, count: u32) -> &mut Self {
-        self.config.limits.total_stacks = count;
-        self
-    }
-
-    /// The maximum number of concurrent core instances supported (default is
-    /// `1000`).
-    ///
-    /// This provides an upper-bound on the total size of core instance
-    /// metadata-related allocations, along with
-    /// [`PoolingAllocationConfig::max_core_instance_size`]. The upper bound is
-    ///
-    /// ```text
-    /// total_core_instances * max_core_instance_size
-    /// ```
-    ///
-    /// where `max_core_instance_size` is rounded up to the size and alignment of
-    /// the internal representation of the metadata.
-    pub fn total_core_instances(&mut self, count: u32) -> &mut Self {
-        self.config.limits.total_core_instances = count;
-        self
-    }
-
-    /// The maximum size, in bytes, allocated for a core instance's `VMContext`
-    /// metadata.
-    ///
-    /// The [`Instance`][crate::Instance] type has a static size but its
-    /// `VMContext` metadata is dynamically sized depending on the module being
-    /// instantiated. This size limit loosely correlates to the size of the Wasm
-    /// module, taking into account factors such as:
-    ///
-    /// * number of functions
-    /// * number of globals
-    /// * number of memories
-    /// * number of tables
-    /// * number of function types
-    ///
-    /// If the allocated size per instance is too small then instantiation of a
-    /// module will fail at runtime with an error indicating how many bytes were
-    /// needed.
-    ///
-    /// The default value for this is 1MiB.
-    ///
-    /// This provides an upper-bound on the total size of core instance
-    /// metadata-related allocations, along with
-    /// [`PoolingAllocationConfig::total_core_instances`]. The upper bound is
-    ///
-    /// ```text
-    /// total_core_instances * max_core_instance_size
-    /// ```
-    ///
-    /// where `max_core_instance_size` is rounded up to the size and alignment of
-    /// the internal representation of the metadata.
-    pub fn max_core_instance_size(&mut self, size: usize) -> &mut Self {
-        self.config.limits.core_instance_size = size;
-        self
-    }
-
-    /// The maximum number of defined tables for a core module (default is `1`).
-    ///
-    /// This value controls the capacity of the `VMTableDefinition` table in
-    /// each instance's `VMContext` structure.
-    ///
-    /// The allocated size of the table will be `tables *
-    /// sizeof(VMTableDefinition)` for each instance regardless of how many
-    /// tables are defined by an instance's module.
-    pub fn max_tables_per_module(&mut self, tables: u32) -> &mut Self {
-        self.config.limits.max_tables_per_module = tables;
-        self
-    }
-
-    /// The maximum table elements for any table defined in a module (default is
-    /// `10000`).
-    ///
-    /// If a table's minimum element limit is greater than this value, the
-    /// module will fail to instantiate.
-    ///
-    /// If a table's maximum element limit is unbounded or greater than this
-    /// value, the maximum will be `table_elements` for the purpose of any
-    /// `table.grow` instruction.
-    ///
-    /// This value is used to reserve the maximum space for each supported
-    /// table; table elements are pointer-sized in the Wasmtime runtime.
-    /// Therefore, the space reserved for each instance is `tables *
-    /// table_elements * sizeof::<*const ()>`.
-    pub fn table_elements(&mut self, elements: u32) -> &mut Self {
-        self.config.limits.table_elements = elements;
-        self
-    }
-
-    /// The maximum number of defined linear memories for a module (default is
-    /// `1`).
-    ///
-    /// This value controls the capacity of the `VMMemoryDefinition` table in
-    /// each core instance's `VMContext` structure.
-    ///
-    /// The allocated size of the table will be `memories *
-    /// sizeof(VMMemoryDefinition)` for each core instance regardless of how
-    /// many memories are defined by the core instance's module.
-    pub fn max_memories_per_module(&mut self, memories: u32) -> &mut Self {
-        self.config.limits.max_memories_per_module = memories;
-        self
-    }
-
-    /// The maximum number of Wasm pages for any linear memory defined in a
-    /// module (default is `160`).
-    ///
-    /// The default of `160` means at most 10 MiB of host memory may be
-    /// committed for each instance.
-    ///
-    /// If a memory's minimum page limit is greater than this value, the module
-    /// will fail to instantiate.
-    ///
-    /// If a memory's maximum page limit is unbounded or greater than this
-    /// value, the maximum will be `memory_pages` for the purpose of any
-    /// `memory.grow` instruction.
-    ///
-    /// This value is used to control the maximum accessible space for each
-    /// linear memory of a core instance.
-    ///
-    /// The reservation size of each linear memory is controlled by the
-    /// `static_memory_maximum_size` setting and this value cannot exceed the
-    /// configured static memory maximum size.
-    pub fn memory_pages(&mut self, pages: u64) -> &mut Self {
-        self.config.limits.memory_pages = pages;
-        self
-    }
-
-    /// Configures whether memory protection keys (MPK) should be used for more
-    /// efficient layout of pool-allocated memories.
-    ///
-    /// When using the pooling allocator (see [`Config::allocation_strategy`],
-    /// [`InstanceAllocationStrategy::Pooling`]), memory protection keys can
-    /// reduce the total amount of allocated virtual memory by eliminating guard
-    /// regions between WebAssembly memories in the pool. It does so by
-    /// "coloring" memory regions with different memory keys and setting which
-    /// regions are accessible each time executions switches from host to guest
-    /// (or vice versa).
-    ///
-    /// MPK is only available on Linux (called `pku` there) and recent x86
-    /// systems; we check for MPK support at runtime by examining the `CPUID`
-    /// register. This configuration setting can be in three states:
-    ///
-    /// - `auto`: if MPK support is available the guard regions are removed; if
-    ///   not, the guard regions remain
-    /// - `enable`: use MPK to eliminate guard regions; fail if MPK is not
-    ///   supported
-    /// - `disable`: never use MPK
-    ///
-    /// By default this value is `disabled`, but may become `auto` in future
-    /// releases.
-    ///
-    /// __WARNING__: this configuration options is still experimental--use at
-    /// your own risk! MPK uses kernel and CPU features to protect memory
-    /// regions; you may observe segmentation faults if anything is
-    /// misconfigured.
-    pub fn memory_protection_keys(&mut self, enable: MpkEnabled) -> &mut Self {
-        self.config.memory_protection_keys = enable;
-        self
-    }
-
-    /// Sets an upper limit on how many memory protection keys (MPK) Wasmtime
-    /// will use.
-    ///
-    /// This setting is only applicable when
-    /// [`PoolingAllocationConfig::memory_protection_keys`] is set to `enable`
-    /// or `auto`. Configuring this above the HW and OS limits (typically 15)
-    /// has no effect.
-    ///
-    /// If multiple Wasmtime engines are used in the same process, note that all
-    /// engines will share the same set of allocated keys; this setting will
-    /// limit how many keys are allocated initially and thus available to all
-    /// other engines.
-    pub fn max_memory_protection_keys(&mut self, max: usize) -> &mut Self {
-        self.config.max_memory_protection_keys = max;
-        self
-    }
-
-    /// Check if memory protection keys (MPK) are available on the current host.
-    ///
-    /// This is a convenience method for determining MPK availability using the
-    /// same method that [`MpkEnabled::Auto`] does. See
-    /// [`PoolingAllocationConfig::memory_protection_keys`] for more
-    /// information.
-    pub fn are_memory_protection_keys_available() -> bool {
-        mpk::is_supported()
-    }
-
-    /// The maximum number of concurrent GC heaps supported (default is `1000`).
-    ///
-    /// This value has a direct impact on the amount of memory allocated by the
-    /// pooling instance allocator.
-    ///
-    /// The pooling instance allocator allocates a GC heap pool, where each
-    /// entry in the pool contains the space needed for each GC heap used by a
-    /// store.
-    #[cfg(feature = "gc")]
-    #[cfg_attr(docsrs, doc(cfg(feature = "gc")))]
-    pub fn total_gc_heaps(&mut self, count: u32) -> &mut Self {
-        self.config.limits.total_gc_heaps = count;
-        self
-    }
-}
-
-pub(crate) fn probestack_supported(arch: Architecture) -> bool {
-    matches!(
-        arch,
-        Architecture::X86_64 | Architecture::Aarch64(_) | Architecture::Riscv64(_)
-    )
-}