@needle-tools/three 0.146.10 → 0.153.1

package/examples/js/geometries/TeapotGeometry.js

@@ -1,335 +0,0 @@
-( function () {
-
-	/**
- * Tessellates the famous Utah teapot database by Martin Newell into triangles.
- *
- * Parameters: size = 50, segments = 10, bottom = true, lid = true, body = true,
- *   fitLid = false, blinn = true
- *
- * size is a relative scale: I've scaled the teapot to fit vertically between -1 and 1.
- * Think of it as a "radius".
- * segments - number of line segments to subdivide each patch edge;
- *   1 is possible but gives degenerates, so two is the real minimum.
- * bottom - boolean, if true (default) then the bottom patches are added. Some consider
- *   adding the bottom heresy, so set this to "false" to adhere to the One True Way.
- * lid - to remove the lid and look inside, set to true.
- * body - to remove the body and leave the lid, set this and "bottom" to false.
- * fitLid - the lid is a tad small in the original. This stretches it a bit so you can't
- *   see the teapot's insides through the gap.
- * blinn - Jim Blinn scaled the original data vertically by dividing by about 1.3 to look
- *   nicer. If you want to see the original teapot, similar to the real-world model, set
- *   this to false. True by default.
- *   See http://en.wikipedia.org/wiki/File:Original_Utah_Teapot.jpg for the original
- *   real-world teapot (from http://en.wikipedia.org/wiki/Utah_teapot).
- *
- * Note that the bottom (the last four patches) is not flat - blame Frank Crow, not me.
- *
- * The teapot should normally be rendered as a double sided object, since for some
- * patches both sides can be seen, e.g., the gap around the lid and inside the spout.
- *
- * Segments 'n' determines the number of triangles output.
- *   Total triangles = 32*2*n*n - 8*n    [degenerates at the top and bottom cusps are deleted]
- *
- *   size_factor   # triangles
- *       1          56
- *       2         240
- *       3         552
- *       4         992
- *
- *      10        6320
- *      20       25440
- *      30       57360
- *
- * Code converted from my ancient SPD software, http://tog.acm.org/resources/SPD/
- * Created for the Udacity course "Interactive Rendering", http://bit.ly/ericity
- * YouTube video on teapot history: https://www.youtube.com/watch?v=DxMfblPzFNc
- *
- * See https://en.wikipedia.org/wiki/Utah_teapot for the history of the teapot
- *
- */
-
-	class TeapotGeometry extends THREE.BufferGeometry {
-
-		constructor( size = 50, segments = 10, bottom = true, lid = true, body = true, fitLid = true, blinn = true ) {
-
-			// 32 * 4 * 4 Bezier spline patches
-			const teapotPatches = [/*rim*/
-				0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 3, 16, 17, 18, 7, 19, 20, 21, 11, 22, 23, 24, 15, 25, 26, 27, 18, 28, 29, 30, 21, 31, 32, 33, 24, 34, 35, 36, 27, 37, 38, 39, 30, 40, 41, 0, 33, 42, 43, 4, 36, 44, 45, 8, 39, 46, 47, 12, /*body*/
-				12, 13, 14, 15, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 15, 25, 26, 27, 51, 60, 61, 62, 55, 63, 64, 65, 59, 66, 67, 68, 27, 37, 38, 39, 62, 69, 70, 71, 65, 72, 73, 74, 68, 75, 76, 77, 39, 46, 47, 12, 71, 78, 79, 48, 74, 80, 81, 52, 77, 82, 83, 56, 56, 57, 58, 59, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 59, 66, 67, 68, 87, 96, 97, 98, 91, 99, 100, 101, 95, 102, 103, 104, 68, 75, 76, 77, 98, 105, 106, 107, 101, 108, 109, 110, 104, 111, 112, 113, 77, 82, 83, 56, 107, 114, 115, 84, 110, 116, 117, 88, 113, 118, 119, 92, /*handle*/
-				120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 123, 136, 137, 120, 127, 138, 139, 124, 131, 140, 141, 128, 135, 142, 143, 132, 132, 133, 134, 135, 144, 145, 146, 147, 148, 149, 150, 151, 68, 152, 153, 154, 135, 142, 143, 132, 147, 155, 156, 144, 151, 157, 158, 148, 154, 159, 160, 68, /*spout*/
-				161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 164, 177, 178, 161, 168, 179, 180, 165, 172, 181, 182, 169, 176, 183, 184, 173, 173, 174, 175, 176, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 176, 183, 184, 173, 188, 197, 198, 185, 192, 199, 200, 189, 196, 201, 202, 193, /*lid*/
-				203, 203, 203, 203, 204, 205, 206, 207, 208, 208, 208, 208, 209, 210, 211, 212, 203, 203, 203, 203, 207, 213, 214, 215, 208, 208, 208, 208, 212, 216, 217, 218, 203, 203, 203, 203, 215, 219, 220, 221, 208, 208, 208, 208, 218, 222, 223, 224, 203, 203, 203, 203, 221, 225, 226, 204, 208, 208, 208, 208, 224, 227, 228, 209, 209, 210, 211, 212, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 212, 216, 217, 218, 232, 241, 242, 243, 236, 244, 245, 246, 240, 247, 248, 249, 218, 222, 223, 224, 243, 250, 251, 252, 246, 253, 254, 255, 249, 256, 257, 258, 224, 227, 228, 209, 252, 259, 260, 229, 255, 261, 262, 233, 258, 263, 264, 237, /*bottom*/
-				265, 265, 265, 265, 266, 267, 268, 269, 270, 271, 272, 273, 92, 119, 118, 113, 265, 265, 265, 265, 269, 274, 275, 276, 273, 277, 278, 279, 113, 112, 111, 104, 265, 265, 265, 265, 276, 280, 281, 282, 279, 283, 284, 285, 104, 103, 102, 95, 265, 265, 265, 265, 282, 286, 287, 266, 285, 288, 289, 270, 95, 94, 93, 92 ];
-			const teapotVertices = [ 1.4, 0, 2.4, 1.4, - 0.784, 2.4, 0.784, - 1.4, 2.4, 0, - 1.4, 2.4, 1.3375, 0, 2.53125, 1.3375, - 0.749, 2.53125, 0.749, - 1.3375, 2.53125, 0, - 1.3375, 2.53125, 1.4375, 0, 2.53125, 1.4375, - 0.805, 2.53125, 0.805, - 1.4375, 2.53125, 0, - 1.4375, 2.53125, 1.5, 0, 2.4, 1.5, - 0.84, 2.4, 0.84, - 1.5, 2.4, 0, - 1.5, 2.4, - 0.784, - 1.4, 2.4, - 1.4, - 0.784, 2.4, - 1.4, 0, 2.4, - 0.749, - 1.3375, 2.53125, - 1.3375, - 0.749, 2.53125, - 1.3375, 0, 2.53125, - 0.805, - 1.4375, 2.53125, - 1.4375, - 0.805, 2.53125, - 1.4375, 0, 2.53125, - 0.84, - 1.5, 2.4, - 1.5, - 0.84, 2.4, - 1.5, 0, 2.4, - 1.4, 0.784, 2.4, - 0.784, 1.4, 2.4, 0, 1.4, 2.4, - 1.3375, 0.749, 2.53125, - 0.749, 1.3375, 2.53125, 0, 1.3375, 2.53125, - 1.4375, 0.805, 2.53125, - 0.805, 1.4375, 2.53125, 0, 1.4375, 2.53125, - 1.5, 0.84, 2.4, - 0.84, 1.5, 2.4, 0, 1.5, 2.4, 0.784, 1.4, 2.4, 1.4, 0.784, 2.4, 0.749, 1.3375, 2.53125, 1.3375, 0.749, 2.53125, 0.805, 1.4375, 2.53125, 1.4375, 0.805, 2.53125, 0.84, 1.5, 2.4, 1.5, 0.84, 2.4, 1.75, 0, 1.875, 1.75, - 0.98, 1.875, 0.98, - 1.75, 1.875, 0, - 1.75, 1.875, 2, 0, 1.35, 2, - 1.12, 1.35, 1.12, - 2, 1.35, 0, - 2, 1.35, 2, 0, 0.9, 2, - 1.12, 0.9, 1.12, - 2, 0.9, 0, - 2, 0.9, - 0.98, - 1.75, 1.875, - 1.75, - 0.98, 1.875, - 1.75, 0, 1.875, - 1.12, - 2, 1.35, - 2, - 1.12, 1.35, - 2, 0, 1.35, - 1.12, - 2, 0.9, - 2, - 1.12, 0.9, - 2, 0, 0.9, - 1.75, 0.98, 1.875, - 0.98, 1.75, 1.875, 0, 1.75, 1.875, - 2, 1.12, 1.35, - 1.12, 2, 1.35, 0, 2, 1.35, - 2, 1.12, 0.9, - 1.12, 2, 0.9, 0, 2, 0.9, 0.98, 1.75, 1.875, 1.75, 0.98, 1.875, 1.12, 2, 1.35, 2, 1.12, 1.35, 1.12, 2, 0.9, 2, 1.12, 0.9, 2, 0, 0.45, 2, - 1.12, 0.45, 1.12, - 2, 0.45, 0, - 2, 0.45, 1.5, 0, 0.225, 1.5, - 0.84, 0.225, 0.84, - 1.5, 0.225, 0, - 1.5, 0.225, 1.5, 0, 0.15, 1.5, - 0.84, 0.15, 0.84, - 1.5, 0.15, 0, - 1.5, 0.15, - 1.12, - 2, 0.45, - 2, - 1.12, 0.45, - 2, 0, 0.45, - 0.84, - 1.5, 0.225, - 1.5, - 0.84, 0.225, - 1.5, 0, 0.225, - 0.84, - 1.5, 0.15, - 1.5, - 0.84, 0.15, - 1.5, 0, 0.15, - 2, 1.12, 0.45, - 1.12, 2, 0.45, 0, 2, 0.45, - 1.5, 0.84, 0.225, - 0.84, 1.5, 0.225, 0, 1.5, 0.225, - 1.5, 0.84, 0.15, - 0.84, 1.5, 0.15, 0, 1.5, 0.15, 1.12, 2, 0.45, 2, 1.12, 0.45, 0.84, 1.5, 0.225, 1.5, 0.84, 0.225, 0.84, 1.5, 0.15, 1.5, 0.84, 0.15, - 1.6, 0, 2.025, - 1.6, - 0.3, 2.025, - 1.5, - 0.3, 2.25, - 1.5, 0, 2.25, - 2.3, 0, 2.025, - 2.3, - 0.3, 2.025, - 2.5, - 0.3, 2.25, - 2.5, 0, 2.25, - 2.7, 0, 2.025, - 2.7, - 0.3, 2.025, - 3, - 0.3, 2.25, - 3, 0, 2.25, - 2.7, 0, 1.8, - 2.7, - 0.3, 1.8, - 3, - 0.3, 1.8, - 3, 0, 1.8, - 1.5, 0.3, 2.25, - 1.6, 0.3, 2.025, - 2.5, 0.3, 2.25, - 2.3, 0.3, 2.025, - 3, 0.3, 2.25, - 2.7, 0.3, 2.025, - 3, 0.3, 1.8, - 2.7, 0.3, 1.8, - 2.7, 0, 1.575, - 2.7, - 0.3, 1.575, - 3, - 0.3, 1.35, - 3, 0, 1.35, - 2.5, 0, 1.125, - 2.5, - 0.3, 1.125, - 2.65, - 0.3, 0.9375, - 2.65, 0, 0.9375, - 2, - 0.3, 0.9, - 1.9, - 0.3, 0.6, - 1.9, 0, 0.6, - 3, 0.3, 1.35, - 2.7, 0.3, 1.575, - 2.65, 0.3, 0.9375, - 2.5, 0.3, 1.125, - 1.9, 0.3, 0.6, - 2, 0.3, 0.9, 1.7, 0, 1.425, 1.7, - 0.66, 1.425, 1.7, - 0.66, 0.6, 1.7, 0, 0.6, 2.6, 0, 1.425, 2.6, - 0.66, 1.425, 3.1, - 0.66, 0.825, 3.1, 0, 0.825, 2.3, 0, 2.1, 2.3, - 0.25, 2.1, 2.4, - 0.25, 2.025, 2.4, 0, 2.025, 2.7, 0, 2.4, 2.7, - 0.25, 2.4, 3.3, - 0.25, 2.4, 3.3, 0, 2.4, 1.7, 0.66, 0.6, 1.7, 0.66, 1.425, 3.1, 0.66, 0.825, 2.6, 0.66, 1.425, 2.4, 0.25, 2.025, 2.3, 0.25, 2.1, 3.3, 0.25, 2.4, 2.7, 0.25, 2.4, 2.8, 0, 2.475, 2.8, - 0.25, 2.475, 3.525, - 0.25, 2.49375, 3.525, 0, 2.49375, 2.9, 0, 2.475, 2.9, - 0.15, 2.475, 3.45, - 0.15, 2.5125, 3.45, 0, 2.5125, 2.8, 0, 2.4, 2.8, - 0.15, 2.4, 3.2, - 0.15, 2.4, 3.2, 0, 2.4, 3.525, 0.25, 2.49375, 2.8, 0.25, 2.475, 3.45, 0.15, 2.5125, 2.9, 0.15, 2.475, 3.2, 0.15, 2.4, 2.8, 0.15, 2.4, 0, 0, 3.15, 0.8, 0, 3.15, 0.8, - 0.45, 3.15, 0.45, - 0.8, 3.15, 0, - 0.8, 3.15, 0, 0, 2.85, 0.2, 0, 2.7, 0.2, - 0.112, 2.7, 0.112, - 0.2, 2.7, 0, - 0.2, 2.7, - 0.45, - 0.8, 3.15, - 0.8, - 0.45, 3.15, - 0.8, 0, 3.15, - 0.112, - 0.2, 2.7, - 0.2, - 0.112, 2.7, - 0.2, 0, 2.7, - 0.8, 0.45, 3.15, - 0.45, 0.8, 3.15, 0, 0.8, 3.15, - 0.2, 0.112, 2.7, - 0.112, 0.2, 2.7, 0, 0.2, 2.7, 0.45, 0.8, 3.15, 0.8, 0.45, 3.15, 0.112, 0.2, 2.7, 0.2, 0.112, 2.7, 0.4, 0, 2.55, 0.4, - 0.224, 2.55, 0.224, - 0.4, 2.55, 0, - 0.4, 2.55, 1.3, 0, 2.55, 1.3, - 0.728, 2.55, 0.728, - 1.3, 2.55, 0, - 1.3, 2.55, 1.3, 0, 2.4, 1.3, - 0.728, 2.4, 0.728, - 1.3, 2.4, 0, - 1.3, 2.4, - 0.224, - 0.4, 2.55, - 0.4, - 0.224, 2.55, - 0.4, 0, 2.55, - 0.728, - 1.3, 2.55, - 1.3, - 0.728, 2.55, - 1.3, 0, 2.55, - 0.728, - 1.3, 2.4, - 1.3, - 0.728, 2.4, - 1.3, 0, 2.4, - 0.4, 0.224, 2.55, - 0.224, 0.4, 2.55, 0, 0.4, 2.55, - 1.3, 0.728, 2.55, - 0.728, 1.3, 2.55, 0, 1.3, 2.55, - 1.3, 0.728, 2.4, - 0.728, 1.3, 2.4, 0, 1.3, 2.4, 0.224, 0.4, 2.55, 0.4, 0.224, 2.55, 0.728, 1.3, 2.55, 1.3, 0.728, 2.55, 0.728, 1.3, 2.4, 1.3, 0.728, 2.4, 0, 0, 0, 1.425, 0, 0, 1.425, 0.798, 0, 0.798, 1.425, 0, 0, 1.425, 0, 1.5, 0, 0.075, 1.5, 0.84, 0.075, 0.84, 1.5, 0.075, 0, 1.5, 0.075, - 0.798, 1.425, 0, - 1.425, 0.798, 0, - 1.425, 0, 0, - 0.84, 1.5, 0.075, - 1.5, 0.84, 0.075, - 1.5, 0, 0.075, - 1.425, - 0.798, 0, - 0.798, - 1.425, 0, 0, - 1.425, 0, - 1.5, - 0.84, 0.075, - 0.84, - 1.5, 0.075, 0, - 1.5, 0.075, 0.798, - 1.425, 0, 1.425, - 0.798, 0, 0.84, - 1.5, 0.075, 1.5, - 0.84, 0.075 ];
-			super();
-
-			// number of segments per patch
-			segments = Math.max( 2, Math.floor( segments ) );
-
-			// Jim Blinn scaled the teapot down in size by about 1.3 for
-			// some rendering tests. He liked the new proportions that he kept
-			// the data in this form. The model was distributed with these new
-			// proportions and became the norm. Trivia: comparing images of the
-			// real teapot and the computer model, the ratio for the bowl of the
-			// real teapot is more like 1.25, but since 1.3 is the traditional
-			// value given, we use it here.
-			const blinnScale = 1.3;
-
-			// scale the size to be the real scaling factor
-			const maxHeight = 3.15 * ( blinn ? 1 : blinnScale );
-			const maxHeight2 = maxHeight / 2;
-			const trueSize = size / maxHeight2;
-
-			// Number of elements depends on what is needed. Subtract degenerate
-			// triangles at tip of bottom and lid out in advance.
-			let numTriangles = bottom ? ( 8 * segments - 4 ) * segments : 0;
-			numTriangles += lid ? ( 16 * segments - 4 ) * segments : 0;
-			numTriangles += body ? 40 * segments * segments : 0;
-			const indices = new Uint32Array( numTriangles * 3 );
-			let numVertices = bottom ? 4 : 0;
-			numVertices += lid ? 8 : 0;
-			numVertices += body ? 20 : 0;
-			numVertices *= ( segments + 1 ) * ( segments + 1 );
-			const vertices = new Float32Array( numVertices * 3 );
-			const normals = new Float32Array( numVertices * 3 );
-			const uvs = new Float32Array( numVertices * 2 );
-
-			// Bezier form
-			const ms = new THREE.Matrix4();
-			ms.set( - 1.0, 3.0, - 3.0, 1.0, 3.0, - 6.0, 3.0, 0.0, - 3.0, 3.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0 );
-			const g = [];
-			const sp = [];
-			const tp = [];
-			const dsp = [];
-			const dtp = [];
-
-			// M * G * M matrix, sort of see
-			// http://www.cs.helsinki.fi/group/goa/mallinnus/curves/surfaces.html
-			const mgm = [];
-			const vert = [];
-			const sdir = [];
-			const tdir = [];
-			const norm = new THREE.Vector3();
-			let tcoord;
-			let sval;
-			let tval;
-			let p;
-			let dsval = 0;
-			let dtval = 0;
-			const normOut = new THREE.Vector3();
-			const gmx = new THREE.Matrix4();
-			const tmtx = new THREE.Matrix4();
-			const vsp = new THREE.Vector4();
-			const vtp = new THREE.Vector4();
-			const vdsp = new THREE.Vector4();
-			const vdtp = new THREE.Vector4();
-			const vsdir = new THREE.Vector3();
-			const vtdir = new THREE.Vector3();
-			const mst = ms.clone();
-			mst.transpose();
-
-			// internal function: test if triangle has any matching vertices;
-			// if so, don't save triangle, since it won't display anything.
-			const notDegenerate = ( vtx1, vtx2, vtx3 ) =>
-			// if any vertex matches, return false
-				! ( vertices[ vtx1 * 3 ] === vertices[ vtx2 * 3 ] && vertices[ vtx1 * 3 + 1 ] === vertices[ vtx2 * 3 + 1 ] && vertices[ vtx1 * 3 + 2 ] === vertices[ vtx2 * 3 + 2 ] || vertices[ vtx1 * 3 ] === vertices[ vtx3 * 3 ] && vertices[ vtx1 * 3 + 1 ] === vertices[ vtx3 * 3 + 1 ] && vertices[ vtx1 * 3 + 2 ] === vertices[ vtx3 * 3 + 2 ] || vertices[ vtx2 * 3 ] === vertices[ vtx3 * 3 ] && vertices[ vtx2 * 3 + 1 ] === vertices[ vtx3 * 3 + 1 ] && vertices[ vtx2 * 3 + 2 ] === vertices[ vtx3 * 3 + 2 ] );
-			for ( let i = 0; i < 3; i ++ ) {
-
-				mgm[ i ] = new THREE.Matrix4();
-
-			}
-
-			const minPatches = body ? 0 : 20;
-			const maxPatches = bottom ? 32 : 28;
-			const vertPerRow = segments + 1;
-			let surfCount = 0;
-			let vertCount = 0;
-			let normCount = 0;
-			let uvCount = 0;
-			let indexCount = 0;
-			for ( let surf = minPatches; surf < maxPatches; surf ++ ) {
-
-				// lid is in the middle of the data, patches 20-27,
-				// so ignore it for this part of the loop if the lid is not desired
-				if ( lid || surf < 20 || surf >= 28 ) {
-
-					// get M * G * M matrix for x,y,z
-					for ( let i = 0; i < 3; i ++ ) {
-
-						// get control patches
-						for ( let r = 0; r < 4; r ++ ) {
-
-							for ( let c = 0; c < 4; c ++ ) {
-
-								// transposed
-								g[ c * 4 + r ] = teapotVertices[ teapotPatches[ surf * 16 + r * 4 + c ] * 3 + i ];
-
-								// is the lid to be made larger, and is this a point on the lid
-								// that is X or Y?
-								if ( fitLid && surf >= 20 && surf < 28 && i !== 2 ) {
-
-									// increase XY size by 7.7%, found empirically. I don't
-									// increase Z so that the teapot will continue to fit in the
-									// space -1 to 1 for Y (Y is up for the final model).
-									g[ c * 4 + r ] *= 1.077;
-
-								}
-
-								// Blinn "fixed" the teapot by dividing Z by blinnScale, and that's the
-								// data we now use. The original teapot is taller. Fix it:
-								if ( ! blinn && i === 2 ) {
-
-									g[ c * 4 + r ] *= blinnScale;
-
-								}
-
-							}
-
-						}
-
-						gmx.set( g[ 0 ], g[ 1 ], g[ 2 ], g[ 3 ], g[ 4 ], g[ 5 ], g[ 6 ], g[ 7 ], g[ 8 ], g[ 9 ], g[ 10 ], g[ 11 ], g[ 12 ], g[ 13 ], g[ 14 ], g[ 15 ] );
-						tmtx.multiplyMatrices( gmx, ms );
-						mgm[ i ].multiplyMatrices( mst, tmtx );
-
-					}
-
-					// step along, get points, and output
-					for ( let sstep = 0; sstep <= segments; sstep ++ ) {
-
-						const s = sstep / segments;
-						for ( let tstep = 0; tstep <= segments; tstep ++ ) {
-
-							const t = tstep / segments;
-
-							// point from basis
-							// get power vectors and their derivatives
-							for ( p = 4, sval = tval = 1.0; p --; ) {
-
-								sp[ p ] = sval;
-								tp[ p ] = tval;
-								sval *= s;
-								tval *= t;
-								if ( p === 3 ) {
-
-									dsp[ p ] = dtp[ p ] = 0.0;
-									dsval = dtval = 1.0;
-
-								} else {
-
-									dsp[ p ] = dsval * ( 3 - p );
-									dtp[ p ] = dtval * ( 3 - p );
-									dsval *= s;
-									dtval *= t;
-
-								}
-
-							}
-
-							vsp.fromArray( sp );
-							vtp.fromArray( tp );
-							vdsp.fromArray( dsp );
-							vdtp.fromArray( dtp );
-
-							// do for x,y,z
-							for ( let i = 0; i < 3; i ++ ) {
-
-								// multiply power vectors times matrix to get value
-								tcoord = vsp.clone();
-								tcoord.applyMatrix4( mgm[ i ] );
-								vert[ i ] = tcoord.dot( vtp );
-
-								// get s and t tangent vectors
-								tcoord = vdsp.clone();
-								tcoord.applyMatrix4( mgm[ i ] );
-								sdir[ i ] = tcoord.dot( vtp );
-								tcoord = vsp.clone();
-								tcoord.applyMatrix4( mgm[ i ] );
-								tdir[ i ] = tcoord.dot( vdtp );
-
-							}
-
-							// find normal
-							vsdir.fromArray( sdir );
-							vtdir.fromArray( tdir );
-							norm.crossVectors( vtdir, vsdir );
-							norm.normalize();
-
-							// if X and Z length is 0, at the cusp, so point the normal up or down, depending on patch number
-							if ( vert[ 0 ] === 0 && vert[ 1 ] === 0 ) {
-
-								// if above the middle of the teapot, normal points up, else down
-								normOut.set( 0, vert[ 2 ] > maxHeight2 ? 1 : - 1, 0 );
-
-							} else {
-
-								// standard output: rotate on X axis
-								normOut.set( norm.x, norm.z, - norm.y );
-
-							}
-
-							// store it all
-							vertices[ vertCount ++ ] = trueSize * vert[ 0 ];
-							vertices[ vertCount ++ ] = trueSize * ( vert[ 2 ] - maxHeight2 );
-							vertices[ vertCount ++ ] = - trueSize * vert[ 1 ];
-							normals[ normCount ++ ] = normOut.x;
-							normals[ normCount ++ ] = normOut.y;
-							normals[ normCount ++ ] = normOut.z;
-							uvs[ uvCount ++ ] = 1 - t;
-							uvs[ uvCount ++ ] = 1 - s;
-
-						}
-
-					}
-
-					// save the faces
-					for ( let sstep = 0; sstep < segments; sstep ++ ) {
-
-						for ( let tstep = 0; tstep < segments; tstep ++ ) {
-
-							const v1 = surfCount * vertPerRow * vertPerRow + sstep * vertPerRow + tstep;
-							const v2 = v1 + 1;
-							const v3 = v2 + vertPerRow;
-							const v4 = v1 + vertPerRow;
-
-							// Normals and UVs cannot be shared. Without clone(), you can see the consequences
-							// of sharing if you call geometry.applyMatrix4( matrix ).
-							if ( notDegenerate( v1, v2, v3 ) ) {
-
-								indices[ indexCount ++ ] = v1;
-								indices[ indexCount ++ ] = v2;
-								indices[ indexCount ++ ] = v3;
-
-							}
-
-							if ( notDegenerate( v1, v3, v4 ) ) {
-
-								indices[ indexCount ++ ] = v1;
-								indices[ indexCount ++ ] = v3;
-								indices[ indexCount ++ ] = v4;
-
-							}
-
-						}
-
-					}
-
-					// increment only if a surface was used
-					surfCount ++;
-
-				}
-
-			}
-
-			this.setIndex( new THREE.BufferAttribute( indices, 1 ) );
-			this.setAttribute( 'position', new THREE.BufferAttribute( vertices, 3 ) );
-			this.setAttribute( 'normal', new THREE.BufferAttribute( normals, 3 ) );
-			this.setAttribute( 'uv', new THREE.BufferAttribute( uvs, 2 ) );
-			this.computeBoundingSphere();
-
-		}
-
-	}
-
-	THREE.TeapotGeometry = TeapotGeometry;
-
-} )();

package/examples/js/geometries/TextGeometry.js

@@ -1,53 +0,0 @@
-( function () {
-
-	/**
- * Text = 3D Text
- *
- * parameters = {
- *  font: <THREE.Font>, // font
- *
- *  size: <float>, // size of the text
- *  height: <float>, // thickness to extrude text
- *  curveSegments: <int>, // number of points on the curves
- *
- *  bevelEnabled: <bool>, // turn on bevel
- *  bevelThickness: <float>, // how deep into text bevel goes
- *  bevelSize: <float>, // how far from text outline (including bevelOffset) is bevel
- *  bevelOffset: <float> // how far from text outline does bevel start
- * }
- */
-	class TextGeometry extends THREE.ExtrudeGeometry {
-
-		constructor( text, parameters = {} ) {
-
-			const font = parameters.font;
-			if ( font === undefined ) {
-
-				super(); // generate default extrude geometry
-
-			} else {
-
-				const shapes = font.generateShapes( text, parameters.size );
-
-				// translate parameters to THREE.ExtrudeGeometry API
-
-				parameters.depth = parameters.height !== undefined ? parameters.height : 50;
-
-				// defaults
-
-				if ( parameters.bevelThickness === undefined ) parameters.bevelThickness = 10;
-				if ( parameters.bevelSize === undefined ) parameters.bevelSize = 8;
-				if ( parameters.bevelEnabled === undefined ) parameters.bevelEnabled = false;
-				super( shapes, parameters );
-
-			}
-
-			this.type = 'TextGeometry';
-
-		}
-
-	}
-
-	THREE.TextGeometry = TextGeometry;
-
-} )();

package/examples/js/helpers/LightProbeHelper.js

@@ -1,48 +0,0 @@
-( function () {
-
-	class LightProbeHelper extends THREE.Mesh {
-
-		constructor( lightProbe, size ) {
-
-			const material = new THREE.ShaderMaterial( {
-				type: 'LightProbeHelperMaterial',
-				uniforms: {
-					sh: {
-						value: lightProbe.sh.coefficients
-					},
-					// by reference
-
-					intensity: {
-						value: lightProbe.intensity
-					}
-				},
-				vertexShader: [ 'varying vec3 vNormal;', 'void main() {', '	vNormal = normalize( normalMatrix * normal );', '	gl_Position = projectionMatrix * modelViewMatrix * vec4( position, 1.0 );', '}' ].join( '\n' ),
-				fragmentShader: [ '#define RECIPROCAL_PI 0.318309886', 'vec3 inverseTransformDirection( in vec3 normal, in mat4 matrix ) {', '	// matrix is assumed to be orthogonal', '	return normalize( ( vec4( normal, 0.0 ) * matrix ).xyz );', '}', '// source: https://graphics.stanford.edu/papers/envmap/envmap.pdf', 'vec3 shGetIrradianceAt( in vec3 normal, in vec3 shCoefficients[ 9 ] ) {', '	// normal is assumed to have unit length', '	float x = normal.x, y = normal.y, z = normal.z;', '	// band 0', '	vec3 result = shCoefficients[ 0 ] * 0.886227;', '	// band 1', '	result += shCoefficients[ 1 ] * 2.0 * 0.511664 * y;', '	result += shCoefficients[ 2 ] * 2.0 * 0.511664 * z;', '	result += shCoefficients[ 3 ] * 2.0 * 0.511664 * x;', '	// band 2', '	result += shCoefficients[ 4 ] * 2.0 * 0.429043 * x * y;', '	result += shCoefficients[ 5 ] * 2.0 * 0.429043 * y * z;', '	result += shCoefficients[ 6 ] * ( 0.743125 * z * z - 0.247708 );', '	result += shCoefficients[ 7 ] * 2.0 * 0.429043 * x * z;', '	result += shCoefficients[ 8 ] * 0.429043 * ( x * x - y * y );', '	return result;', '}', 'uniform vec3 sh[ 9 ]; // sh coefficients', 'uniform float intensity; // light probe intensity', 'varying vec3 vNormal;', 'void main() {', '	vec3 normal = normalize( vNormal );', '	vec3 worldNormal = inverseTransformDirection( normal, viewMatrix );', '	vec3 irradiance = shGetIrradianceAt( worldNormal, sh );', '	vec3 outgoingLight = RECIPROCAL_PI * irradiance * intensity;', '	gl_FragColor = linearToOutputTexel( vec4( outgoingLight, 1.0 ) );', '}' ].join( '\n' )
-			} );
-			const geometry = new THREE.SphereGeometry( 1, 32, 16 );
-			super( geometry, material );
-			this.lightProbe = lightProbe;
-			this.size = size;
-			this.type = 'LightProbeHelper';
-			this.onBeforeRender();
-
-		}
-		dispose() {
-
-			this.geometry.dispose();
-			this.material.dispose();
-
-		}
-		onBeforeRender() {
-
-			this.position.copy( this.lightProbe.position );
-			this.scale.set( 1, 1, 1 ).multiplyScalar( this.size );
-			this.material.uniforms.intensity.value = this.lightProbe.intensity;
-
-		}
-
-	}
-
-	THREE.LightProbeHelper = LightProbeHelper;
-
-} )();

package/examples/js/helpers/OctreeHelper.js

@@ -1,76 +0,0 @@
-( function () {
-
-	class OctreeHelper extends THREE.LineSegments {
-
-		constructor( octree, color = 0xffff00 ) {
-
-			super( new THREE.BufferGeometry(), new THREE.LineBasicMaterial( {
-				color: color,
-				toneMapped: false
-			} ) );
-			this.octree = octree;
-			this.color = color;
-			this.type = 'OctreeHelper';
-			this.update();
-
-		}
-		update() {
-
-			const vertices = [];
-			function traverse( tree ) {
-
-				for ( let i = 0; i < tree.length; i ++ ) {
-
-					const min = tree[ i ].box.min;
-					const max = tree[ i ].box.max;
-					vertices.push( max.x, max.y, max.z );
-					vertices.push( min.x, max.y, max.z ); // 0, 1
-					vertices.push( min.x, max.y, max.z );
-					vertices.push( min.x, min.y, max.z ); // 1, 2
-					vertices.push( min.x, min.y, max.z );
-					vertices.push( max.x, min.y, max.z ); // 2, 3
-					vertices.push( max.x, min.y, max.z );
-					vertices.push( max.x, max.y, max.z ); // 3, 0
-
-					vertices.push( max.x, max.y, min.z );
-					vertices.push( min.x, max.y, min.z ); // 4, 5
-					vertices.push( min.x, max.y, min.z );
-					vertices.push( min.x, min.y, min.z ); // 5, 6
-					vertices.push( min.x, min.y, min.z );
-					vertices.push( max.x, min.y, min.z ); // 6, 7
-					vertices.push( max.x, min.y, min.z );
-					vertices.push( max.x, max.y, min.z ); // 7, 4
-
-					vertices.push( max.x, max.y, max.z );
-					vertices.push( max.x, max.y, min.z ); // 0, 4
-					vertices.push( min.x, max.y, max.z );
-					vertices.push( min.x, max.y, min.z ); // 1, 5
-					vertices.push( min.x, min.y, max.z );
-					vertices.push( min.x, min.y, min.z ); // 2, 6
-					vertices.push( max.x, min.y, max.z );
-					vertices.push( max.x, min.y, min.z ); // 3, 7
-
-					traverse( tree[ i ].subTrees );
-
-				}
-
-			}
-
-			traverse( this.octree.subTrees );
-			this.geometry.dispose();
-			this.geometry = new THREE.BufferGeometry();
-			this.geometry.setAttribute( 'position', new THREE.Float32BufferAttribute( vertices, 3 ) );
-
-		}
-		dispose() {
-
-			this.geometry.dispose();
-			this.material.dispose();
-
-		}
-
-	}
-
-	THREE.OctreeHelper = OctreeHelper;
-
-} )();

package/examples/js/helpers/PositionalAudioHelper.js

@@ -1,91 +0,0 @@
-( function () {
-
-	class PositionalAudioHelper extends THREE.Line {
-
-		constructor( audio, range = 1, divisionsInnerAngle = 16, divisionsOuterAngle = 2 ) {
-
-			const geometry = new THREE.BufferGeometry();
-			const divisions = divisionsInnerAngle + divisionsOuterAngle * 2;
-			const positions = new Float32Array( ( divisions * 3 + 3 ) * 3 );
-			geometry.setAttribute( 'position', new THREE.BufferAttribute( positions, 3 ) );
-			const materialInnerAngle = new THREE.LineBasicMaterial( {
-				color: 0x00ff00
-			} );
-			const materialOuterAngle = new THREE.LineBasicMaterial( {
-				color: 0xffff00
-			} );
-			super( geometry, [ materialOuterAngle, materialInnerAngle ] );
-			this.audio = audio;
-			this.range = range;
-			this.divisionsInnerAngle = divisionsInnerAngle;
-			this.divisionsOuterAngle = divisionsOuterAngle;
-			this.type = 'PositionalAudioHelper';
-			this.update();
-
-		}
-		update() {
-
-			const audio = this.audio;
-			const range = this.range;
-			const divisionsInnerAngle = this.divisionsInnerAngle;
-			const divisionsOuterAngle = this.divisionsOuterAngle;
-			const coneInnerAngle = THREE.MathUtils.degToRad( audio.panner.coneInnerAngle );
-			const coneOuterAngle = THREE.MathUtils.degToRad( audio.panner.coneOuterAngle );
-			const halfConeInnerAngle = coneInnerAngle / 2;
-			const halfConeOuterAngle = coneOuterAngle / 2;
-			let start = 0;
-			let count = 0;
-			let i;
-			let stride;
-			const geometry = this.geometry;
-			const positionAttribute = geometry.attributes.position;
-			geometry.clearGroups();
-
-			//
-
-			function generateSegment( from, to, divisions, materialIndex ) {
-
-				const step = ( to - from ) / divisions;
-				positionAttribute.setXYZ( start, 0, 0, 0 );
-				count ++;
-				for ( i = from; i < to; i += step ) {
-
-					stride = start + count;
-					positionAttribute.setXYZ( stride, Math.sin( i ) * range, 0, Math.cos( i ) * range );
-					positionAttribute.setXYZ( stride + 1, Math.sin( Math.min( i + step, to ) ) * range, 0, Math.cos( Math.min( i + step, to ) ) * range );
-					positionAttribute.setXYZ( stride + 2, 0, 0, 0 );
-					count += 3;
-
-				}
-
-				geometry.addGroup( start, count, materialIndex );
-				start += count;
-				count = 0;
-
-			}
-
-			//
-
-			generateSegment( - halfConeOuterAngle, - halfConeInnerAngle, divisionsOuterAngle, 0 );
-			generateSegment( - halfConeInnerAngle, halfConeInnerAngle, divisionsInnerAngle, 1 );
-			generateSegment( halfConeInnerAngle, halfConeOuterAngle, divisionsOuterAngle, 0 );
-
-			//
-
-			positionAttribute.needsUpdate = true;
-			if ( coneInnerAngle === coneOuterAngle ) this.material[ 0 ].visible = false;
-
-		}
-		dispose() {
-
-			this.geometry.dispose();
-			this.material[ 0 ].dispose();
-			this.material[ 1 ].dispose();
-
-		}
-
-	}
-
-	THREE.PositionalAudioHelper = PositionalAudioHelper;
-
-} )();

package/examples/js/helpers/RectAreaLightHelper.js

@@ -1,73 +0,0 @@
-( function () {
-
-	/**
- *  This helper must be added as a child of the light
- */
-
-	class RectAreaLightHelper extends THREE.Line {
-
-		constructor( light, color ) {
-
-			const positions = [ 1, 1, 0, - 1, 1, 0, - 1, - 1, 0, 1, - 1, 0, 1, 1, 0 ];
-			const geometry = new THREE.BufferGeometry();
-			geometry.setAttribute( 'position', new THREE.Float32BufferAttribute( positions, 3 ) );
-			geometry.computeBoundingSphere();
-			const material = new THREE.LineBasicMaterial( {
-				fog: false
-			} );
-			super( geometry, material );
-			this.light = light;
-			this.color = color; // optional hardwired color for the helper
-			this.type = 'RectAreaLightHelper';
-
-			//
-
-			const positions2 = [ 1, 1, 0, - 1, 1, 0, - 1, - 1, 0, 1, 1, 0, - 1, - 1, 0, 1, - 1, 0 ];
-			const geometry2 = new THREE.BufferGeometry();
-			geometry2.setAttribute( 'position', new THREE.Float32BufferAttribute( positions2, 3 ) );
-			geometry2.computeBoundingSphere();
-			this.add( new THREE.Mesh( geometry2, new THREE.MeshBasicMaterial( {
-				side: THREE.BackSide,
-				fog: false
-			} ) ) );
-
-		}
-		updateMatrixWorld() {
-
-			this.scale.set( 0.5 * this.light.width, 0.5 * this.light.height, 1 );
-			if ( this.color !== undefined ) {
-
-				this.material.color.set( this.color );
-				this.children[ 0 ].material.color.set( this.color );
-
-			} else {
-
-				this.material.color.copy( this.light.color ).multiplyScalar( this.light.intensity );
-
-				// prevent hue shift
-				const c = this.material.color;
-				const max = Math.max( c.r, c.g, c.b );
-				if ( max > 1 ) c.multiplyScalar( 1 / max );
-				this.children[ 0 ].material.color.copy( this.material.color );
-
-			}
-
-			// ignore world scale on light
-			this.matrixWorld.extractRotation( this.light.matrixWorld ).scale( this.scale ).copyPosition( this.light.matrixWorld );
-			this.children[ 0 ].matrixWorld.copy( this.matrixWorld );
-
-		}
-		dispose() {
-
-			this.geometry.dispose();
-			this.material.dispose();
-			this.children[ 0 ].geometry.dispose();
-			this.children[ 0 ].material.dispose();
-
-		}
-
-	}
-
-	THREE.RectAreaLightHelper = RectAreaLightHelper;
-
-} )();