arduino_ci 0.1.3 → 0.1.4

data/cpp/arduino/include/io90pwm316.h

@@ -0,0 +1,1272 @@
+/* Copyright (c) 2007, Atmel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE. */
+
+/* $Id: io90pwm316.h 2225 2011-03-02 16:27:26Z arcanum $ */
+
+/* avr/io90pwm316.h - definitions for AT90PWM316 */
+
+#ifndef _AVR_IO90PWM316_H_
+#define _AVR_IO90PWM316_H_ 1
+
+/* This file should only be included from <avr/io.h>, never directly. */
+
+#ifndef _AVR_IO_H_
+#  error "Include <avr/io.h> instead of this file."
+#endif
+
+#ifndef _AVR_IOXXX_H_
+#  define _AVR_IOXXX_H_ "io90pwm316.h"
+#else
+#  error "Attempt to include more than one <avr/ioXXX.h> file."
+#endif 
+
+/* I/O registers */
+
+/* Port B Input Pins Address */
+#define PINB    _SFR_IO8(0x03)
+#define PINB0   0
+#define PINB1   1
+#define PINB2   2
+#define PINB3   3
+#define PINB4   4
+#define PINB5   5
+#define PINB6   6
+#define PINB7   7
+
+/* Port B Data Direction Register */
+#define DDRB    _SFR_IO8(0x04)
+#define DDB0    0
+#define DDB1    1
+#define DDB2    2
+#define DDB3    3
+#define DDB4    4
+#define DDB5    5
+#define DDB6    6
+#define DDB7    7
+
+/* Port B Data Register */
+#define PORTB   _SFR_IO8(0x05)
+#define PB0     0
+#define PB1     1
+#define PB2     2
+#define PB3     3
+#define PB4     4
+#define PB5     5
+#define PB6     6
+#define PB7     7
+
+/* Port C Input Pins Address */
+#define PINC    _SFR_IO8(0x06)
+#define PINC0   0
+#define PINC1   1
+#define PINC2   2
+#define PINC3   3
+#define PINC4   4
+#define PINC5   5
+#define PINC6   6
+#define PINC7   7
+
+/* Port C Data Direction Register */
+#define DDRC    _SFR_IO8(0x07)
+#define DDC0    0
+#define DDC1    1
+#define DDC2    2
+#define DDC3    3
+#define DDC4    4
+#define DDC5    5
+#define DDC6    6
+#define DDC7    7
+
+/* Port C Data Register */
+#define PORTC   _SFR_IO8(0x08)
+#define PC0     0
+#define PC1     1
+#define PC2     2
+#define PC3     3
+#define PC4     4
+#define PC5     5
+#define PC6     6
+#define PC7     7
+
+/* Port D Input Pins Address */
+#define PIND    _SFR_IO8(0x09)
+#define PIND0   0
+#define PIND1   1
+#define PIND2   2
+#define PIND3   3
+#define PIND4   4
+#define PIND5   5
+#define PIND6   6
+#define PIND7   7
+
+/* Port D Data Direction Register */
+#define DDRD    _SFR_IO8(0x0A)
+#define DDD0    0
+#define DDD1    1
+#define DDD2    2
+#define DDD3    3
+#define DDD4    4
+#define DDD5    5
+#define DDD6    6
+#define DDD7    7
+
+/* Port D Data Register */
+#define PORTD   _SFR_IO8(0x0B)
+#define PD0     0
+#define PD1     1
+#define PD2     2
+#define PD3     3
+#define PD4     4
+#define PD5     5
+#define PD6     6
+#define PD7     7
+
+/* Port E Input Pins Address */
+#define PINE    _SFR_IO8(0x0C)
+#define PINE0   0
+#define PINE1   1
+#define PINE2   2
+
+/* Port E Data Direction Register */
+#define DDRE    _SFR_IO8(0x0D)
+#define DDE0    0
+#define DDE1    1
+#define DDE2    2
+
+/* Port E Data Register */
+#define PORTE   _SFR_IO8(0x0E)
+#define PE0     0
+#define PE1     1
+#define PE2     2
+
+/* Timer/Counter 0 Interrupt Flag Register */
+#define TIFR0   _SFR_IO8(0x15)
+#define TOV0    0   /* Overflow Flag */
+#define OCF0A   1   /* Output Compare Flag 0A */
+#define OCF0B   2   /* Output Compare Flag 0B */
+
+/* Timer/Counter1 Interrupt Flag Register */
+#define TIFR1   _SFR_IO8(0x16)
+#define TOV1    0   /* Overflow Flag */
+#define OCF1A   1   /* Output Compare Flag 1A*/
+#define OCF1B   2   /* Output Compare Flag 1B*/
+#define ICF1    5   /* Input Capture Flag 1 */
+
+/* General Purpose I/O Register 1 */
+#define GPIOR1  _SFR_IO8(0x19)
+#define GPIOR10 0
+#define GPIOR11 1
+#define GPIOR12 2
+#define GPIOR13 3
+#define GPIOR14 4
+#define GPIOR15 5
+#define GPIOR16 6
+#define GPIOR17 7
+
+/* General Purpose I/O Register 2 */
+#define GPIOR2  _SFR_IO8(0x1A)
+#define GPIOR20 0
+#define GPIOR21 1
+#define GPIOR22 2
+#define GPIOR23 3
+#define GPIOR24 4
+#define GPIOR25 5
+#define GPIOR26 6
+#define GPIOR27 7
+
+/* General Purpose I/O Register 3 */
+#define GPIOR3  _SFR_IO8(0x1B)
+#define GPIOR30 0
+#define GPIOR31 1
+#define GPIOR32 2
+#define GPIOR33 3
+#define GPIOR34 4
+#define GPIOR35 5
+#define GPIOR36 6
+#define GPIOR37 7
+
+/* External Interrupt Flag Register */
+#define EIFR    _SFR_IO8(0x1C)
+#define INTF0   0
+#define INTF1   1
+#define INTF2   2
+#define INTF3   3
+
+/* External Interrupt Mask Register */
+#define EIMSK   _SFR_IO8(0x1D)
+#define INT0    0   /* External Interrupt Request 0 Enable */
+#define INT1    1   /* External Interrupt Request 1 Enable */
+#define INT2    2   /* External Interrupt Request 2 Enable */
+#define INT3    3   /* External Interrupt Request 3 Enable */
+
+/* General Purpose I/O Register 0 */
+#define GPIOR0  _SFR_IO8(0x1E)
+#define GPIOR00 0
+#define GPIOR01 1
+#define GPIOR02 2
+#define GPIOR03 3
+#define GPIOR04 4
+#define GPIOR05 5
+#define GPIOR06 6
+#define GPIOR07 7
+
+/* EEPROM Control Register */
+#define EECR    _SFR_IO8(0x1F)
+#define EERE    0   /* EEPROM Read Enable */
+#define EEWE    1   /* EEPROM Write Enable */
+#define EEMWE   2   /* EEPROM Master Write Enable */
+#define EERIE   3   /* EEPROM Ready Interrupt Enable */
+
+/* EEPROM Data Register */
+#define EEDR    _SFR_IO8(0x20)
+#define EEDR0   0
+#define EEDR1   1
+#define EEDR2   2
+#define EEDR3   3
+#define EEDR4   4
+#define EEDR5   5
+#define EEDR6   6
+#define EEDR7   7
+
+/* The EEPROM Address Registers */
+#define EEAR    _SFR_IO16(0x21)
+#define EEARL   _SFR_IO8(0x21)
+#define EEAR0   0
+#define EEAR1   1
+#define EEAR2   2
+#define EEAR3   3
+#define EEAR4   4
+#define EEAR5   5
+#define EEAR6   6
+#define EEAR7   7
+#define EEARH   _SFR_IO8(0x22)
+#define EEAR8   0
+#define EEAR9   1
+#define EEAR10  2
+#define EEAR11  3
+
+/* 6-char sequence denoting where to find the EEPROM registers in memory space.
+   Adresses denoted in hex syntax with uppercase letters. Used by the EEPROM
+   subroutines.
+   First two letters:  EECR address.
+   Second two letters: EEDR address.
+   Last two letters:   EEAR address.  */
+#define __EEPROM_REG_LOCATIONS__ 1F2021
+
+/* General Timer/Counter Control Register */
+#define GTCCR   _SFR_IO8(0x23)
+#define PSR10   0   /* Prescaler Reset Timer/Counter1 and Timer/Counter0 */
+#define ICPSEL1 6   /* Timer1 Input Capture Selection Bit */
+#define TSM     7   /* Timer/Counter Synchronization Mode */
+
+/* Timer/Counter Control Register A */
+#define TCCR0A  _SFR_IO8(0x24)
+#define WGM00   0   /* Waveform Generation Mode */
+#define WGM01   1   /* Waveform Generation Mode */
+#define COM0B0  4   /* Compare Output Mode, Fast PWm */
+#define COM0B1  5   /* Compare Output Mode, Fast PWm */
+#define COM0A0  6   /* Compare Output Mode, Phase Correct PWM Mode */
+#define COM0A1  7   /* Compare Output Mode, Phase Correct PWM Mode */
+
+/* Timer/Counter Control Register B */
+#define TCCR0B  _SFR_IO8(0x25)
+#define CS00    0   /* Clock Select */
+#define CS01    1   /* Clock Select */
+#define CS02    2   /* Clock Select */
+#define WGM02   3   /* Waveform Generation Mode */
+#define FOC0B   6   /* Force Output Compare B */
+#define FOC0A   7   /* Force Output Compare A */
+
+/* Timer/Counter0 Register */
+#define TCNT0   _SFR_IO8(0x26)
+#define TCNT00  0
+#define TCNT01  1
+#define TCNT02  2
+#define TCNT03  3
+#define TCNT04  4
+#define TCNT05  5
+#define TCNT06  6
+#define TCNT07  7
+
+/* Timer/Counter0 Output Compare Register A */
+#define OCR0A   _SFR_IO8(0x27)
+#define OCR0A0  0
+#define OCR0A1  1
+#define OCR0A2  2
+#define OCR0A3  3
+#define OCR0A4  4
+#define OCR0A5  5
+#define OCR0A6  6
+#define OCR0A7  7
+
+/* Timer/Counter0 Output Compare Register B */
+#define OCR0B   _SFR_IO8(0x28)
+#define OCR0B0  0
+#define OCR0B1  1
+#define OCR0B2  2
+#define OCR0B3  3
+#define OCR0B4  4
+#define OCR0B5  5
+#define OCR0B6  6
+#define OCR0B7  7
+
+/* PLL Control and Status Register */
+#define PLLCSR  _SFR_IO8(0x29)
+#define PLOCK   0   /* PLL Lock Detector */
+#define PLLE    1   /* PLL Enable */
+#define PLLF    2   /* PLL Factor */
+
+/* SPI Control Register */
+#define SPCR    _SFR_IO8(0x2C)
+#define SPR0    0   /* SPI Clock Rate Select 0 */
+#define SPR1    1   /* SPI Clock Rate Select 1 */
+#define CPHA    2   /* Clock Phase */
+#define CPOL    3   /* Clock polarity */
+#define MSTR    4   /* Master/Slave Select */
+#define DORD    5   /* Data Order */
+#define SPE     6   /* SPI Enable */
+#define SPIE    7   /* SPI Interrupt Enable */
+
+/* SPI Status Register */
+#define SPSR    _SFR_IO8(0x2D)
+#define SPI2X   0   /* Double SPI Speed Bit */
+#define WCOL    6   /* Write Collision Flag */
+#define SPIF    7   /* SPI Interrupt Flag */
+
+/* SPI Data Register */
+#define SPDR    _SFR_IO8(0x2E)
+#define SPD0    0
+#define SPD1    1
+#define SPD2    2
+#define SPD3    3
+#define SPD4    4
+#define SPD5    5
+#define SPD6    6
+#define SPD7    7
+
+/* Analog Comparator Status Register */
+#define ACSR    _SFR_IO8(0x30)
+#define AC0O    0   /* Analog Comparator 0 Output Bit */
+#define AC1O    1   /* Analog Comparator 1 Output Bit */
+#define AC2O    2   /* Analog Comparator 2 Output Bit */
+#define AC0IF   4   /* Analog Comparator 0 Interrupt Flag Bit */
+#define AC1IF   5   /* Analog Comparator 1 Interrupt Flag Bit */
+#define AC2IF   6   /* Analog Comparator 2 Interrupt Flag Bit */
+#define ACCKDIV 7   /* Analog Comparator Clock Divider */
+
+/* Sleep Mode Control Register */
+#define SMCR    _SFR_IO8(0x33)
+#define SE      0   /* Sleep Enable */
+#define SM0     1   /* Sleep Mode Select bit0 */
+#define SM1     2   /* Sleep Mode Select bit1 */
+#define SM2     3   /* Sleep Mode Select bit2 */
+
+/* MCU Status Register */
+#define MCUSR   _SFR_IO8(0x34)
+#define PORF    0   /* Power-on reset flag */
+#define EXTRF   1   /* External Reset Flag */
+#define BORF    2   /* Brown-out Reset Flag */
+#define WDRF    3   /* Watchdog Reset Flag */
+
+/* MCU Control Register */
+#define MCUCR   _SFR_IO8(0x35)
+#define IVCE    0   /* Interrupt Vector Change Enable */
+#define IVSEL   1   /* Interrupt Vector Select */
+#define PUD     4   /* Pull-up disable */
+#define SPIPS   7   /* SPI Pin Select */
+
+/* Store Program Memory Control Register */
+#define SPMCSR  _SFR_IO8(0x37)
+#define SPMEN   0   /* Store Program Memory Enable */
+#define PGERS   1   /* Page Erase */
+#define PGWRT   2   /* Page Write */
+#define BLBSET  3   /* Boot Lock Bit Set */
+#define RWWSRE  4   /* Read While Write section read enable */
+#define RWWSB   6   /* Read While Write Section Busy */
+#define SPMIE   7   /* SPM Interrupt Enable */
+
+/* Watchdog Timer Control Register */
+#define WDTCSR  _SFR_MEM8(0x60)
+#define WDP0    0   /* Watchdog Timer Prescaler bit0 */
+#define WDP1    1   /* Watchdog Timer Prescaler bit1 */
+#define WDP2    2   /* Watchdog Timer Prescaler bit2 */
+#define WDE     3   /* Watchdog Enable */
+#define WDCE    4   /* Watchdog Change Enable */
+#define WDP3    5   /* Watchdog Timer Prescaler bit3 */
+#define WDIE    6   /* Watchdog Timeout Interrupt Enable */
+#define WDIF    7   /* Watchdog Timeout Interrupt Flag */
+
+/* Clock Prescaler Register */
+#define CLKPR   _SFR_MEM8(0x61)
+#define CLKPS0  0   /* Clock Prescaler Select bit0 */
+#define CLKPS1  1   /* Clock Prescaler Select bit1 */
+#define CLKPS2  2   /* Clock Prescaler Select bit2 */
+#define CLKPS3  3   /* Clock Prescaler Select bit3 */
+#define CLKPCE  7   /* Clock Prescaler Change Enable */
+
+/* Power Reduction Register */
+#define PRR     _SFR_MEM8(0x64)
+#define PRADC   0   /* Power Reduction ADC */
+#define PRUSART0 1  /* Power Reduction USART0 */
+#define PRUSART PRUSART0 /* Define to maintain backward-compatibility */
+#define PRSPI   2   /* Power Reduction Serial Peripheral Interface */
+#define PRTIM0  3   /* Power Reduction Timer/Counter0 */
+#define PRTIM1  4   /* Power Reduction Timer/Counter1 */
+#define PRPSC0  5   /* Power Reduction PSC0 */
+#define PRPSC1  6   /* Power Reduction PSC1 */
+#define PRPSC2  7   /* Power Reduction PSC2 */
+
+#define __AVR_HAVE_PRR	((1<<PRADC)|(1<<PRUSART0)|(1<<PRSPI)|(1<<PRTIM0)|(1<<PRTIM1)|(1<<PRPSC0)|(1<<PRPSC1)|(1<<PRPSC2))
+#define __AVR_HAVE_PRR_PRADC
+#define __AVR_HAVE_PRR_PRUSART0
+#define __AVR_HAVE_PRR_PRSPI
+#define __AVR_HAVE_PRR_PRTIM0
+#define __AVR_HAVE_PRR_PRTIM1
+#define __AVR_HAVE_PRR_PRPSC0
+#define __AVR_HAVE_PRR_PRPSC1
+#define __AVR_HAVE_PRR_PRPSC2
+
+/* Oscillator Calibration Value */
+#define OSCCAL  _SFR_MEM8(0x66)
+#define CAL0    0
+#define CAL1    1
+#define CAL2    2
+#define CAL3    3
+#define CAL4    4
+#define CAL5    5
+#define CAL6    6
+
+/* External Interrupt Control Register A */
+#define EICRA   _SFR_MEM8(0x69)
+#define ISC00   0
+#define ISC01   1
+#define ISC10   2
+#define ISC11   3
+#define ISC20   4
+#define ISC21   5
+#define ISC30   6
+#define ISC31   7
+
+/* Timer/Counter0 Interrupt Mask Register */
+#define TIMSK0  _SFR_MEM8(0x6E)
+#define TOIE0   0   /* Overflow Interrupt Enable */
+#define OCIE0A  1   /* Output Compare Match A Interrupt Enable */
+#define OCIE0B  2   /* Output Compare Match B Interrupt Enable */
+
+/* Timer/Counter1 Interrupt Mask Register */
+#define TIMSK1  _SFR_MEM8(0x6F)
+#define TOIE1   0   /* Overflow Interrupt Enable */
+#define OCIE1A  1   /* Output Compare Match A Interrupt Enable */
+#define OCIE1B  2   /* Output Compare Match B Interrupt Enable */
+#define ICIE1   5   /* Input Capture Interrupt Enable */
+
+/* Amplifier 0 Control and Status register */
+#define AMP0CSR _SFR_MEM8(0x76)
+#define AMP0TS0 0
+#define AMP0TS1 1
+#define AMP0G0  4
+#define AMP0G1  5
+#define AMP0IS  6
+#define AMP0EN  7
+
+/* Amplifier 1 Control and Status register */
+#define AMP1CSR _SFR_MEM8(0x77)
+#define AMP1TS0 0
+#define AMP1TS1 1
+#define AMP1G0  4
+#define AMP1G1  5
+#define AMP1IS  6
+#define AMP1EN  7
+
+/* ADC Result Data Register */
+#ifndef __ASSEMBLER__
+#define ADC     _SFR_MEM16(0x78)
+#endif
+#define ADCW    _SFR_MEM16(0x78)
+#define ADCL    _SFR_MEM8(0x78)
+#define ADCH    _SFR_MEM8(0x79)
+
+/* ADC Control and Status Register A */
+#define ADCSRA  _SFR_MEM8(0x7A)
+#define ADPS0   0   /* ADC Prescaler Select bit0 */
+#define ADPS1   1   /* ADC Prescaler Select bit1 */
+#define ADPS2   2   /* ADC Prescaler Select bit2 */
+#define ADIE    3   /* ADC Interrupt Enable */
+#define ADIF    4   /* ADC Interrupt Flag */
+#define ADATE   5   /* ADC Auto Trigger Enable */
+#define ADSC    6   /* ADC Start Conversion */
+#define ADEN    7   /* ADC Enable */
+
+/* ADC Control and Status Register B */
+#define ADCSRB  _SFR_MEM8(0x7B)
+#define ADTS0   0   /* ADC Auto Trigger Source 0 */
+#define ADTS1   1   /* ADC Auto Trigger Source 1 */
+#define ADTS2   2   /* ADC Auto Trigger Source 2 */
+#define ADTS3   3   /* ADC Auto Trigger Source 3 */
+#define ADHSM   7   /* ADC High Speed Mode */
+
+/* ADC multiplexer Selection Register */
+#define ADMUX   _SFR_MEM8(0x7C)
+#define MUX0    0   /* Analog Channel and Gain Selection bit0 */
+#define MUX1    1   /* Analog Channel and Gain Selection bit1 */
+#define MUX2    2   /* Analog Channel and Gain Selection bit2 */
+#define MUX3    3   /* Analog Channel and Gain Selection bit3 */
+#define ADLAR   5   /* Left Adjust Result */
+#define REFS0   6   /* Reference Selection bit0 */
+#define REFS1   7   /* Reference Selection bit1 */
+
+/* Digital Input Disable Register 0 */
+#define DIDR0   _SFR_MEM8(0x7E)
+#define ADC0D   0   /* ADC0 Digital input Disable */
+#define ADC1D   1   /* ADC1 Digital input Disable */
+#define ADC2D   2   /* ADC2 Digital input Disable */
+#define ADC3D   3   /* ADC3 Digital input Disable */
+#define ADC4D   4   /* ADC4 Digital input Disable */
+#define ADC5D   5   /* ADC5 Digital input Disable */
+#define ADC6D   6   /* ADC6 Digital input Disable */
+#define ADC7D   7   /* ADC7 Digital input Disable */
+
+/* Digital Input Disable Register 1 */
+#define DIDR1   _SFR_MEM8(0x7F)
+#define ADC8D   0   /* ADC8 Digital input Disable */
+#define ADC9D   1   /* ADC9 Digital input Disable */
+#define ADC10D  2   /* ADC10 Digital input Disable */
+#define AMP0ND  3
+#define AMP0PD  4
+#define ACMP0D  5
+
+/* Timer/Counter1 Control Register A */
+#define TCCR1A  _SFR_MEM8(0x80)
+#define WGM10   0   /* Waveform Generation Mode */
+#define WGM11   1   /* Waveform Generation Mode */
+#define COM1B0  4   /* Compare Output Mode 1B, bit 0 */
+#define COM1B1  5   /* Compare Output Mode 1B, bit 1 */
+#define COM1A0  6   /* Comparet Ouput Mode 1A, bit 0 */
+#define COM1A1  7   /* Comparet Ouput Mode 1A, bit 1 */
+
+/* Timer/Counter1 Control Register B */
+#define TCCR1B  _SFR_MEM8(0x81)
+#define CS10    0   /* Prescaler source of Timer/Counter 1 */
+#define CS11    1   /* Prescaler source of Timer/Counter 1 */
+#define CS12    2   /* Prescaler source of Timer/Counter 1 */
+#define WGM12   3   /* Waveform Generation Mode */
+#define WGM13   4   /* Waveform Generation Mode */
+#define ICES1   6   /* Input Capture 1 Edge Select */
+#define ICNC1   7   /* Input Capture 1 Noise Canceler */
+
+/* Timer/Counter1 Control Register C */
+#define TCCR1C  _SFR_MEM8(0x82)
+#define FOC1B   6   /* Force Output Compare for Channel B */
+#define FOC1A   7   /* Force Output Compare for Channel A */
+
+/* Timer/Counter1 */
+#define TCNT1   _SFR_MEM16(0x84)
+#define TCNT1L  _SFR_MEM8(0x84)
+#define TCNT10  0
+#define TCNT11  1
+#define TCNT12  2
+#define TCNT13  3
+#define TCNT14  4
+#define TCNT15  5
+#define TCNT16  6
+#define TCNT17  7
+#define TCNT1H  _SFR_MEM8(0x85)
+#define TCNT18  0
+#define TCNT19  1
+#define TCNT110 2
+#define TCNT111 3
+#define TCNT112 4
+#define TCNT113 5
+#define TCNT114 6
+#define TCNT115 7
+
+/* Input Capture Register 1 */
+#define ICR1    _SFR_MEM16(0x86)
+#define ICR1L   _SFR_MEM8(0x86)
+#define ICR17   7
+#define ICR16   6
+#define ICR15   5
+#define ICR14   4
+#define ICR13   3
+#define ICR12   2
+#define ICR11   1
+#define ICR10   0
+#define ICR1H   _SFR_MEM8(0x87)
+#define ICR115  7
+#define ICR114  6
+#define ICR113  5
+#define ICR112  4
+#define ICR111  3
+#define ICR110  2
+#define ICR19   1
+#define ICR18   0
+
+/* Output Compare Register 1 A */
+#define OCR1A   _SFR_MEM16(0x88)
+#define OCR1AL  _SFR_MEM8(0x88)
+#define OCR1A0  0
+#define OCR1A1  1
+#define OCR1A2  2
+#define OCR1A3  3
+#define OCR1A4  4
+#define OCR1A5  5
+#define OCR1A6  6
+#define OCR1A7  7
+#define OCR1AH  _SFR_MEM8(0x89)
+#define OCR1A8  0
+#define OCR1A9  1
+#define OCR1A10 2
+#define OCR1A11 3
+#define OCR1A12 4
+#define OCR1A13 5
+#define OCR1A14 6
+#define OCR1A15 7
+
+/* Output Compare Register 1 B */
+#define OCR1B   _SFR_MEM16(0x8A)
+#define OCR1BL  _SFR_MEM8(0x8A)
+#define OCR1B0  0
+#define OCR1B1  1
+#define OCR1B2  2
+#define OCR1B3  3
+#define OCR1B4  4
+#define OCR1B5  5
+#define OCR1B6  6
+#define OCR1B7  7
+#define OCR1BH  _SFR_MEM8(0x8B)
+#define OCR1B8  0
+#define OCR1B9  1
+#define OCR1B10 2
+#define OCR1B11 3
+#define OCR1B12 4
+#define OCR1B13 5
+#define OCR1B14 6
+#define OCR1B15 7
+
+/* PSC0 Interrupt Flag Register */
+#define PIFR0   _SFR_MEM8(0xA0)
+#define PEOP0   0   /* End Of PSC0 Interrupt */
+#define PRN00   1   /* PSC0 Ramp Number bit0 */
+#define PRN01   2   /* PSC0 Ramp Number bit1 */
+#define PEV0A   3   /* PSC0 External Event A Interrupt */
+#define PEV0B   4   /* PSC0 External Event B Interrupt */
+#define PSEI0   5   /* PSC0 Synchro Error Interrupt */
+#define POAC0A  6   /* PSC0 Output A Activity */
+#define POAC0B  7   /* PSC0 Output B Activity */
+
+/* PSC0 Interrupt Mask Register */
+#define PIM0    _SFR_MEM8(0xA1)
+#define PEOPE0  0   /* PSC0 End Of Cycle Interrupt Enable */
+#define PEVE0A  3   /* PSC0 External Event A Interrupt Enable */
+#define PEVE0B  4   /* PSC0 External Event B Interrupt Enable */
+#define PSEIE0  5   /* PSC0 Synchro Error Interrupt Enable */
+
+/* PSC1 Interrupt Flag Register */
+#define PIFR1   _SFR_MEM8(0xA2)
+#define PEOP1   0
+#define PRN10   1
+#define PRN11   2
+#define PEV1A   3
+#define PEV1B   4
+#define PSEI1   5
+#define POAC1A  6
+#define POAC1B  7
+
+/* PSC1 Interrupt Mask Register */
+#define PIM1    _SFR_MEM8(0xA3)
+#define PEOPE1  0 /* PSC1 End of Cycle Interrupt Enable */
+#define PEVE1A  3 /* PSC1 External Event A Interrupt Enable */
+#define PEVE1B  4 /* PSC1 External Event B Interrupt Enable */
+#define PSEIE1  5 /* PSC1 Synchro Error Interrupt Enable */
+
+/* PSC2 Interrupt Flag Register */
+#define PIFR2   _SFR_MEM8(0xA4)
+#define PEOP2   0   /* End Of PSC2 Interrupt */
+#define PRN20   1   /* PSC2 Ramp Number bit0 */
+#define PRN21   2   /* PSC2 Ramp Number bit1 */
+#define PEV2A   3   /* PSC2 External Event A Interrupt */
+#define PEV2B   4   /* PSC2 External Event B Interrupt */
+#define PSEI2   5   /* PSC2 Synchro Error Interrupt */
+#define POAC2A  6   /* PSC2 Output A Activity */
+#define POAC2B  7   /* PSC2 Output B Activity */
+
+/* PSC2 Interrupt Mask Register */
+#define PIM2    _SFR_MEM8(0xA5)
+#define PEOPE2  0   /* PSC2 End Of Cycle Interrupt Enable */
+#define PEVE2A  3   /* PSC2 External Event A Interrupt Enable */
+#define PEVE2B  4   /* PSC2 External Event B Interrupt Enable */
+#define PSEIE2  5   /* PSC2 Synchro Error Interrupt Enable */
+
+/* Digital to Analog Conversion Control Register */
+#define DACON   _SFR_MEM8(0xAA)
+#define DAEN    0   /* Digital to Analog Enable bit */
+#define DAOE    1   /* Digital to Analog Output Enable bit */
+#define DALA    2   /* Digital to Analog Left Adjust */
+#define DATS0   4   /* DAC Trigger Selection bit0 */
+#define DATS1   5   /* DAC Trigger Selection bit1 */
+#define DATS2   6   /* DAC Trigger Selection bit2 */
+#define DAATE   7   /* DAC Auto Trigger Enable bit */
+
+/* Digital to Analog Converter input Register */
+#define DAC     _SFR_MEM16(0xAB)
+#define DACL    _SFR_MEM8(0xAB)
+#define DACH    _SFR_MEM8(0xAC)
+
+/* Analog Comparator 0 Control Register */
+#define AC0CON  _SFR_MEM8(0xAD)
+#define AC0M0   0   /* Analog Comparator 0 Multiplexer register bit0 */
+#define AC0M1   1   /* Analog Comparator 0 Multiplexer register bit1 */
+#define AC0M2   2   /* Analog Comparator 0 Multiplexer register bit2 */
+#define AC0IS0  4   /* Analog Comparator 0 Interrupt Select bit0 */
+#define AC0IS1  5   /* Analog Comparator 0 Interrupt Select bit1 */
+#define AC0IE   6   /* Analog Comparator 0 Interrupt Enable bit */
+#define AC0EN   7   /* Analog Comparator 0 Enable Bit */
+
+/* Analog Comparator 1 Control Register */
+#define AC1CON  _SFR_MEM8(0xAE)
+#define AC1M0   0   /* Analog Comparator 1 Multiplexer register bit0 */
+#define AC1M1   1   /* Analog Comparator 1 Multiplexer register bit1 */
+#define AC1M2   2   /* Analog Comparator 1 Multiplexer register bit2 */
+#define AC1ICE  3   /* Analog Comparator 1 Interrupt Capture Enable bit */
+#define AC1IS0  4   /* Analog Comparator 1 Interrupt Select bit0 */
+#define AC1IS1  5   /* Analog Comparator 1 Interrupt Select bit1 */
+#define AC1IE   6   /* Analog Comparator 1 Interrupt Enable bit */
+#define AC1EN   7   /* Analog Comparator 1 Enable Bit */
+
+/* Analog Comparator 2 Control Register */
+#define AC2CON  _SFR_MEM8(0xAF)
+#define AC2M0   0   /* Analog Comparator 2 Multiplexer register bit0 */
+#define AC2M1   1   /* Analog Comparator 2 Multiplexer register bit1 */
+#define AC2M2   2   /* Analog Comparator 2 Multiplexer register bit2 */
+#define AC2IS0  4   /* Analog Comparator 2 Interrupt Select bit0 */
+#define AC2IS1  5   /* Analog Comparator 2 Interrupt Select bit1 */
+#define AC2IE   6   /* Analog Comparator 2 Interrupt Enable bit */
+#define AC2EN   7   /* Analog Comparator 2 Enable Bit */
+
+/* USART Control and Status Register A */
+#define UCSRA   _SFR_MEM8(0xC0)
+#define MPCM    0   /* Multi-processor Communication Mode */
+#define U2X     1   /* Double the USART Transmission Speed */
+#define UPE     2   /* USART Parity Error */
+#define DOR     3   /* Data OverRun */
+#define FE      4   /* Frame Error */
+#define UDRE    5   /* USART Data Register Empty */
+#define TXC     6   /* USART Transmit Complete */
+#define RXC     7   /* USART Receive Complete */
+
+/* USART Control and Status Register B */
+#define UCSRB   _SFR_MEM8(0xC1)
+#define TXB8    0   /* Transmit Data Bit 8 */
+#define RXB8    1   /* Receive Data Bit 8 */
+#define UCSZ2   2   /* Character Size */
+#define TXEN    3   /* Transmitter Enable */
+#define RXEN    4   /* Receiver Enable */
+#define UDRIE   5   /* USART Data Register Empty Interrupt Enable */
+#define TXCIE   6   /* TX Complete Interrupt Enable */
+#define RXCIE   7   /* RX Complete Interrupt Enable */
+
+/* USART Control and Status Register C */
+#define UCSRC   _SFR_MEM8(0xC2)
+#define UCPOL   0   /* Clock Polarity */
+#define UCSZ0   1   /* Character Size bit0 */
+#define UCSZ1   2   /* Character Size bit1 */
+#define USBS    3   /* Stop Bit Select */
+#define UPM0    4   /* Parity Mode bit0 */
+#define UPM1    5   /* Parity Mode bit1 */
+#define UMSEL   6   /* USART Mode Select */
+
+/* USART Baud Rate Register */
+#define UBRR    _SFR_MEM16(0xC4)
+#define UBRRL   _SFR_MEM8(0xC4)
+#define UBRRH   _SFR_MEM8(0xC5)
+
+/* USART I/O Data Register */
+#define UDR     _SFR_MEM8(0xC6)
+
+/* EUSART Control and Status Register A */
+#define EUCSRA  _SFR_MEM8(0xC8)
+#define URxS0   0   /* EUSART Receive Character Size bit0 */
+#define URxS1   1   /* EUSART Receive Character Size bit1 */
+#define URxS2   2   /* EUSART Receive Character Size bit2 */
+#define URxS3   3   /* EUSART Receive Character Size bit3 */
+#define UTxS0   4   /* EUSART Transmit Character Size bit0 */
+#define UTxS1   5   /* EUSART Transmit Character Size bit1 */
+#define UTxS2   6   /* EUSART Transmit Character Size bit2 */
+#define UTxS3   7   /* EUSART Transmit Character Size bit3 */
+
+/* EUSART Control and Status Register B */
+#define EUCSRB  _SFR_MEM8(0xC9)
+#define BODR    0   /* Bit Order */
+#define EMCH    1   /* Manchester mode */
+#define EUSBS   3   /* EUSBS Enable Bit */
+#define EUSART  4   /* EUSART Enable Bit */
+
+/* EUSART Control and Status Register C */
+#define EUCSRC  _SFR_MEM8(0xCA)
+#define STP0    0   /* Stop bits values bit0 */
+#define STP1    1   /* Stop bits values bit1 */
+#define F1617   2
+#define FEM     3   /* Frame Error Manchester */
+
+/* Manchester receiver Baud Rate Registers */
+#define MUBRR   _SFR_MEM16(0xCC)
+#define MUBRRL  _SFR_MEM8(0xCC)
+#define MUBRRH  _SFR_MEM8(0xCD)
+
+/* EUSART I/O Data Register */
+#define EUDR    _SFR_MEM8(0xCE)
+
+/* PSC 0 Synchro and Output Configuration */
+#define PSOC0   _SFR_MEM8(0xD0)
+#define POEN0A  0   /* PSC 0 OUT Part A Output Enable */
+#define POEN0B  2   /* PSC 0 OUT Part B Output Enable */
+#define PSYNC00 4   /* Synchronization Out for ADC Selection bit0 */
+#define PSYNC01 5   /* Synchronization Out for ADC Selection bit1 */
+
+/* Output Compare SA Registers */
+#define OCR0SA  _SFR_MEM16(0xD2)
+#define OCR0SAL _SFR_MEM8(0xD2)
+#define OCR0SAH _SFR_MEM8(0xD3)
+
+/* Output Compare RA Registers */
+#define OCR0RA  _SFR_MEM16(0xD4)
+#define OCR0RAL _SFR_MEM8(0xD4)
+#define OCR0RAH _SFR_MEM8(0xD5)
+
+/* Output Compare SB Registers */
+#define OCR0SB  _SFR_MEM16(0xD6)
+#define OCR0SBL _SFR_MEM8(0xD6)
+#define OCR0SBH _SFR_MEM8(0xD7)
+
+/* Output Compare RB Registers */
+#define OCR0RB  _SFR_MEM16(0xD8)
+#define OCR0RBL _SFR_MEM8(0xD8)
+#define OCR0RBH _SFR_MEM8(0xD9)
+
+/* PSC 0 Configuration Register */
+#define PCNF0   _SFR_MEM8(0xDA)
+#define PCLKSEL0 1  /* PSC 0 Input Clock Select */
+#define POP0     2  /* PSC 0 Output Polarity */
+#define PMODE00  3  /* PSC 0 Mode bit0 */
+#define PMODE01  4  /* PSC 0 Mode bit1 */
+#define PLOCK0   5  /* PSC 0 Lock */
+#define PALOCK0  6  /* PSC 0 Autolock */
+#define PFIFTY0  7  /* PSC 0 Fifty */
+
+/* PSC 0 Control Register */
+#define PCTL0   _SFR_MEM8(0xDB)
+#define PRUN0   0   /* PSC 0 Run */
+#define PCCYC0  1   /* PSC 0 Complete Cycle */
+#define PARUN0  2   /* PSC 0 Autorun */
+#define PAOC0A  3   /* PSC 0 Asynchronous Output Control A */
+#define PAOC0B  4   /* PSC 0 Asynchronous Output Control B */
+#define PBFM0   5   /* Balance Flank Width Modulation */
+#define PPRE00  6   /* PSC 0 Prescaler Select bit0 */
+#define PPRE01  7   /* PSC 0 Prescaler Select bit1 */
+
+/* PSC 0 Input A Control Register */
+#define PFRC0A  _SFR_MEM8(0xDC)
+#define PRFM0A0 0   /* PSC 0 Fault Mode bit0 */
+#define PRFM0A1 1   /* PSC 0 Fault Mode bit1 */
+#define PRFM0A2 2   /* PSC 0 Fault Mode bit2 */
+#define PRFM0A3 3   /* PSC 0 Fault Mode bit3 */
+#define PFLTE0A 4   /* PSC 0 Filter Enable on Input Part A */
+#define PELEV0A 5   /* PSC 0 Edge Level Selector of Input Part A */
+#define PISEL0A 6   /* PSC 0 Input Select for Part A */
+#define PCAE0A  7   /* PSC 0 Capture Enable Input Part A */
+
+/* PSC 0 Input B Control Register */
+#define PFRC0B  _SFR_MEM8(0xDD)
+#define PRFM0B0 0   /* PSC 0 Fault Mode bit0 */
+#define PRFM0B1 1   /* PSC 0 Fault Mode bit1 */
+#define PRFM0B2 2   /* PSC 0 Fault Mode bit2 */
+#define PRFM0B3 3   /* PSC 0 Fault Mode bit3 */
+#define PFLTE0B 4   /* PSC 0 Filter Enable on Input Part B */
+#define PELEV0B 5   /* PSC 0 Edge Level Selector of Input Part B */
+#define PISEL0B 6   /* PSC 0 Input Select for Part B */
+#define PCAE0B  7   /* PSC 0 Capture Enable Input Part B */
+
+/* PSC 0 Input Capture Registers */
+#define PICR0   _SFR_MEM16(0xDE)
+#define PICR0L  _SFR_MEM8(0xDE)
+#define PICR0H  _SFR_MEM8(0xDF)
+#define PCST0   7   /* PSC Capture Software Trig bit */
+
+/* PSC 1 Synchro and Output Configuration */
+#define PSOC1   _SFR_MEM8(0xE0)
+#define POEN1A 0
+#define POEN1B 2
+#define PSYNC1_0 4
+#define PSYNC1_1 5
+
+/* Output Compare SA Registers */
+#define OCR1SA  _SFR_MEM16(0xE2)
+#define OCR1SAL _SFR_MEM8(0xE2)
+#define OCR1SAH _SFR_MEM8(0xE3)
+
+/* Output Compare RA Registers */
+#define OCR1RA  _SFR_MEM16(0xE4)
+#define OCR1RAL _SFR_MEM8(0xE4)
+#define OCR1RAH _SFR_MEM8(0xE5)
+
+/* Output Compare SB Registers */
+#define OCR1SB  _SFR_MEM16(0xE6)
+#define OCR1SBL _SFR_MEM8(0xE6)
+#define OCR1SBH _SFR_MEM8(0xE7)
+
+/* Output Compare RB Registers */
+#define OCR1RB  _SFR_MEM16(0xE8)
+#define OCR1RBL _SFR_MEM8(0xE8)
+#define OCR1RBH _SFR_MEM8(0xE9)
+
+/* PSC 1 Configuration Register */
+#define PCNF1   _SFR_MEM8(0xEA)
+#define PCLKSEL1 1
+#define POP1     2
+#define PMODE10  3
+#define PMODE11  4
+#define PLOCK1   5
+#define PALOCK1  6
+#define PFIFTY1  7
+
+/* PSC 1 Control Register */
+#define PCTL1   _SFR_MEM8(0xEB)
+#define PRUN1  0
+#define PCCYC1 1
+#define PARUN1 2
+#define PAOC1A 3
+#define PAOC1B 4
+#define PBFM1  5
+#define PPRE10 6
+#define PPRE11 7
+
+/* PSC 1 Input A Control Register */
+#define PFRC1A  _SFR_MEM8(0xEC)
+#define PRFM1A0 0
+#define PRFM1A1 1
+#define PRFM1A2 2
+#define PRFM1A3 3
+#define PFLTE1A 4
+#define PELEV1A 5
+#define PISEL1A 6
+#define PCAE1A  7
+
+/* PSC 1 Input B Control Register */
+#define PFRC1B  _SFR_MEM8(0xED)
+#define PRFM1B0 0
+#define PRFM1B1 1
+#define PRFM1B2 2
+#define PRFM1B3 3
+#define PFLTE1B 4
+#define PELEV1B 5
+#define PISEL1B 6
+#define PCAE1B  7
+
+/* PSC 1 Input Capture Registers */
+#define PICR1   _SFR_MEM16(0xEE)
+#define PICR1L  _SFR_MEM8(0xEE)
+#define PICR1H  _SFR_MEM8(0xEF)
+
+/* PSC 2 Synchro and Output Configuration */
+#define PSOC2   _SFR_MEM8(0xF0)
+#define POEN2A  0   /* PSC 2 OUT Part A Output Enable */
+#define POEN2C  1   /* PSCOUT22 Output Enable */
+#define POEN2B  2   /* PSC 2 OUT Part B Output Enable */
+#define POEN2D  3   /* PSCOUT23 Output Enable */
+#define PSYNC20 4   /* Synchronization Out for ADC Selection bit0 */
+#define PSYNC21 5   /* Synchronization Out for ADC Selection bit1 */
+#define POS22   6   /* PSCOUT22 Selection */
+#define POS23   7   /* PSCOUT23 Selection */
+
+/* PSC 2 Output Matrix */
+#define POM2    _SFR_MEM8(0xF1)
+#define POMV2A0 0   /* Output Matrix Output A Ramp 0 */
+#define POMV2A1 1   /* Output Matrix Output A Ramp 1 */
+#define POMV2A2 2   /* Output Matrix Output A Ramp 2 */
+#define POMV2A3 3   /* Output Matrix Output A Ramp 3 */
+#define POMV2B0 4   /* Output Matrix Output B Ramp 0 */
+#define POMV2B1 5   /* Output Matrix Output B Ramp 1 */
+#define POMV2B2 6   /* Output Matrix Output B Ramp 2 */
+#define POMV2B3 7   /* Output Matrix Output B Ramp 3 */
+
+/* Output Compare SA Registers */
+#define OCR2SA  _SFR_MEM16(0xF2)
+#define OCR2SAL _SFR_MEM8(0xF2)
+#define OCR2SAH _SFR_MEM8(0xF3)
+
+/* Output Compare RA Registers */
+#define OCR2RA  _SFR_MEM16(0xF4)
+#define OCR2RAL _SFR_MEM8(0xF4)
+#define OCR2RAH _SFR_MEM8(0xF5)
+
+/* Output Compare SB Registers */
+#define OCR2SB  _SFR_MEM16(0xF6)
+#define OCR2SBL _SFR_MEM8(0xF6)
+#define OCR2SBH _SFR_MEM8(0xF7)
+
+/* Output Compare RB Registers */
+#define OCR2RB  _SFR_MEM16(0xF8)
+#define OCR2RBL _SFR_MEM8(0xF8)
+#define OCR2RBH _SFR_MEM8(0xF9)
+
+/* PSC 2 Configuration Register */
+#define PCNF2   _SFR_MEM8(0xFA)
+#define POME2    0  /* PSC 2 Output Matrix Enable */
+#define PCLKSEL2 1  /* PSC 2 Input Clock Select */
+#define POP2     2  /* PSC 2 Output Polarity */
+#define PMODE20  3  /* PSC 2 Mode bit0 */
+#define PMODE21  4  /* PSC 2 Mode bit1 */
+#define PLOCK2   5  /* PSC 2 Lock */
+#define PALOCK2  6  /* PSC 2 Autolock */
+#define PFIFTY2  7  /* PSC 2 Fifty */
+
+/* PSC 2 Control Register */
+#define PCTL2   _SFR_MEM8(0xFB)
+#define PRUN2   0   /* PSC 2 Run */
+#define PCCYC2  1   /* PSC 2 Complete Cycle */
+#define PARUN2  2   /* PSC 2 Autorun */
+#define PAOC2A  3   /* PSC 2 Asynchronous Output Control A */
+#define PAOC2B  4   /* PSC 2 Asynchronous Output Control B */
+#define PBFM2   5   /* Balance Flank Width Modulation */
+#define PPRE20  6   /* PSC 2 Prescaler Select bit0 */
+#define PPRE21  7   /* PSC 2 Prescaler Select bit1 */
+
+/* PSC 2 Input A Control Register */
+#define PFRC2A  _SFR_MEM8(0xFC)
+#define PRFM2A0 0   /* PSC 2 Fault Mode bit0 */
+#define PRFM2A1 1   /* PSC 2 Fault Mode bit1 */
+#define PRFM2A2 2   /* PSC 2 Fault Mode bit2 */
+#define PRFM2A3 3   /* PSC 2 Fault Mode bit3 */
+#define PFLTE2A 4   /* PSC 2 Filter Enable on Input Part A */
+#define PELEV2A 5   /* PSC 2 Edge Level Selector of Input Part A */
+#define PISEL2A 6   /* PSC 2 Input Select for Part A */
+#define PCAE2A  7   /* PSC 2 Capture Enable Input Part A */
+
+/* PSC 2 Input B Control Register */
+#define PFRC2B  _SFR_MEM8(0xFD)
+#define PRFM2B0 0   /* PSC 2 Fault Mode bit0 */
+#define PRFM2B1 1   /* PSC 2 Fault Mode bit1 */
+#define PRFM2B2 2   /* PSC 2 Fault Mode bit2 */
+#define PRFM2B3 3   /* PSC 2 Fault Mode bit3 */
+#define PFLTE2B 4   /* PSC 2 Filter Enable on Input Part B */
+#define PELEV2B 5   /* PSC 2 Edge Level Selector of Input Part B */
+#define PISEL2B 6   /* PSC 2 Input Select for Part B */
+#define PCAE2B  7   /* PSC 2 Capture Enable Input Part B */
+
+/* PSC 2 Input Capture Registers */
+#define PICR2   _SFR_MEM16(0xFE)
+#define PICR2L  _SFR_MEM8(0xFE)
+#define PICR2H  _SFR_MEM8(0xFF)
+#define PCST2   7   /* PSC Capture Software Trig bit */
+
+
+/* Interrupt Vectors */
+/* Interrupt 0 is the reset vector. */
+
+/* PSC2 Capture Event */
+#define PSC2_CAPT_vect_num 1
+#define PSC2_CAPT_vect     _VECTOR(1)
+
+/* PSC2 End Cycle */
+#define PSC2_EC_vect_num   2
+#define PSC2_EC_vect       _VECTOR(2)
+
+/* PSC1 Capture Event */
+#define PSC1_CAPT_vect_num 3
+#define PSC1_CAPT_vect     _VECTOR(3)
+
+/* PSC1 End Cycle */
+#define PSC1_EC_vect_num   4
+#define PSC1_EC_vect       _VECTOR(4)
+
+/* PSC0 Capture Event */
+#define PSC0_CAPT_vect_num 5
+#define PSC0_CAPT_vect     _VECTOR(5)
+
+/* PSC0 End Cycle */
+#define PSC0_EC_vect_num   6
+#define PSC0_EC_vect       _VECTOR(6)
+
+/* Analog Comparator 0 */
+#define ANALOG_COMP_0_vect_num 7
+#define ANALOG_COMP_0_vect _VECTOR(7)
+
+/* Analog Comparator 1 */
+#define ANALOG_COMP_1_vect_num 8
+#define ANALOG_COMP_1_vect _VECTOR(8)
+
+/* Analog Comparator 2 */
+#define ANALOG_COMP_2_vect_num 9
+#define ANALOG_COMP_2_vect _VECTOR(9)
+
+/* External Interrupt Request 0 */
+#define INT0_vect_num      10
+#define INT0_vect          _VECTOR(10)
+
+/* Timer/Counter1 Capture Event */
+#define TIMER1_CAPT_vect_num 11
+#define TIMER1_CAPT_vect   _VECTOR(11)
+
+/* Timer/Counter1 Compare Match A */
+#define TIMER1_COMPA_vect_num  12
+#define TIMER1_COMPA_vect  _VECTOR(12)
+
+/* Timer/Counter Compare Match B */
+#define TIMER1_COMPB_vect_num  13
+#define TIMER1_COMPB_vect  _VECTOR(13)
+
+/* Timer/Counter1 Overflow */
+#define TIMER1_OVF_vect_num 15
+#define TIMER1_OVF_vect    _VECTOR(15)
+
+/* Timer/Counter0 Compare Match A */
+#define TIMER0_COMP_A_vect_num 16
+#define TIMER0_COMP_A_vect _VECTOR(16)
+
+/* Timer/Counter0 Overflow */
+#define TIMER0_OVF_vect_num 17
+#define TIMER0_OVF_vect    _VECTOR(17)
+
+/* ADC Conversion Complete */
+#define ADC_vect_num       18
+#define ADC_vect           _VECTOR(18)
+
+/* External Interrupt Request 1 */
+#define INT1_vect_num      19
+#define INT1_vect          _VECTOR(19)
+
+/* SPI Serial Transfer Complete */
+#define SPI_STC_vect_num   20
+#define SPI_STC_vect       _VECTOR(20)
+
+/* USART, Rx Complete */
+#define USART_RX_vect_num  21
+#define USART_RX_vect      _VECTOR(21)
+
+/* USART Data Register Empty */
+#define USART_UDRE_vect_num 22
+#define USART_UDRE_vect    _VECTOR(22)
+
+/* USART, Tx Complete */
+#define USART_TX_vect_num  23
+#define USART_TX_vect      _VECTOR(23)
+
+/* External Interrupt Request 2 */
+#define INT2_vect_num      24
+#define INT2_vect          _VECTOR(24)
+
+/* Watchdog Timeout Interrupt */
+#define WDT_vect_num       25
+#define WDT_vect           _VECTOR(25)
+
+/* EEPROM Ready */
+#define EE_READY_vect_num  26
+#define EE_READY_vect      _VECTOR(26)
+
+/* Timer Counter 0 Compare Match B */
+#define TIMER0_COMPB_vect_num 27
+#define TIMER0_COMPB_vect  _VECTOR(27)
+
+/* External Interrupt Request 3 */
+#define INT3_vect_num      28
+#define INT3_vect          _VECTOR(28)
+
+/* Store Program Memory Read */
+#define SPM_READY_vect_num 31
+#define SPM_READY_vect     _VECTOR(31)
+
+#define _VECTORS_SIZE   (4 * 32)
+
+/* Constants */
+
+#define RAMSTART       0x100
+#define RAMEND         0x4FF
+#define XRAMSIZE       0
+#define XRAMEND        RAMEND
+#define E2END          0x1FF
+#define E2PAGESIZE     4
+#define FLASHEND       0x3FFF
+#define SPM_PAGESIZE   128
+
+
+/* Fuse Information */
+
+#define FUSE_MEMORY_SIZE 3
+
+/* Low Fuse Byte */
+#define FUSE_CKSEL0  (unsigned char)~_BV(0)  /* Select Clock Source */
+#define FUSE_CKSEL1  (unsigned char)~_BV(1)  /* Select Clock Source */
+#define FUSE_CKSEL2  (unsigned char)~_BV(2)  /* Select Clock Source */
+#define FUSE_CKSEL3  (unsigned char)~_BV(3)  /* Select Clock Source */
+#define FUSE_SUT0    (unsigned char)~_BV(4)  /* Select start-up time */
+#define FUSE_SUT1    (unsigned char)~_BV(5)  /* Select start-up time */
+#define FUSE_CKOUT   (unsigned char)~_BV(6)  /* Oscillator output option */
+#define FUSE_CKDIV8  (unsigned char)~_BV(7)  /* Divide clock by 8 */
+#define LFUSE_DEFAULT (FUSE_CKSEL0 & FUSE_CKSEL2 & FUSE_CKSEL3 & FUSE_SUT0 & FUSE_CKDIV8)
+
+/* High Fuse Byte */
+#define FUSE_BODLEVEL0 (unsigned char)~_BV(0)
+#define FUSE_BODLEVEL1 (unsigned char)~_BV(1)
+#define FUSE_BODLEVEL2 (unsigned char)~_BV(2)
+#define FUSE_EESAVE    (unsigned char)~_BV(3)  /* EEPROM memory is preserved through chip erase */
+#define FUSE_WDTON     (unsigned char)~_BV(4)  /* Watchdog timer always on */
+#define FUSE_SPIEN     (unsigned char)~_BV(5)  /* Enable Serial programming and Data Downloading */
+#define FUSE_DWEN      (unsigned char)~_BV(6)  /* debugWIRE Enable */
+#define FUSE_RSTDISBL  (unsigned char)~_BV(7)  /* External Reset Diasble */
+#define HFUSE_DEFAULT (FUSE_SPIEN)
+
+/* Extended Fuse Byte */
+#define FUSE_BOOTRST  (unsigned char)~_BV(0)  /* Select Reset Vector */
+#define FUSE_BOOTSZ0  (unsigned char)~_BV(1)  /* Select Boot Size */
+#define FUSE_BOOTSZ1  (unsigned char)~_BV(2)  /* Select Boot Size */
+#define FUSE_PSCRV    (unsigned char)~_BV(4)
+#define FUSE_PSC0RB   (unsigned char)~_BV(5)
+#define FUSE_PSC1RB   (unsigned char)~_BV(6)
+#define FUSE_PSC2RB   (unsigned char)~_BV(7)
+#define EFUSE_DEFAULT (FUSE_BOOTSZ0 & FUSE_BOOTSZ1)
+
+
+/* Lock Bits */
+#define __LOCK_BITS_EXIST
+#define __BOOT_LOCK_BITS_0_EXIST
+#define __BOOT_LOCK_BITS_1_EXIST 
+
+
+/* Signature */
+#define SIGNATURE_0 0x1E
+#define SIGNATURE_1 0x94
+#define SIGNATURE_2 0x83
+
+#define SLEEP_MODE_IDLE (0x00<<1)
+#define SLEEP_MODE_ADC (0x01<<1)
+#define SLEEP_MODE_PWR_DOWN (0x02<<1)
+#define SLEEP_MODE_STANDBY (0x06<<1)
+
+#endif /* _AVR_IO90PWM316_H_ */