arduino_ci 0.1.3 → 0.1.4

data/cpp/arduino/include/io86r401.h

@@ -0,0 +1,309 @@
+/* Copyright (c) 2002, Colin O'Flynn
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE. */
+
+/* avr/io86r401.h - definitions for AT86RF401 */
+
+#ifndef _AVR_IO86RF401_H_
+#define _AVR_IO86RF401_H_ 1
+
+/* This file should only be included from <avr/io.h>, never directly. */
+
+#ifndef _AVR_IO_H_
+#  error "Include <avr/io.h> instead of this file."
+#endif
+
+#ifndef _AVR_IOXXX_H_
+#  define _AVR_IOXXX_H_ "io86r401.h"
+#else
+#  error "Attempt to include more than one <avr/ioXXX.h> file."
+#endif
+
+/* Status REGister */
+#define SREG    _SFR_IO8(0x3F)
+
+/* Stack Pointer */
+#define SP      _SFR_IO16(0x3D)
+#define SPH     _SFR_IO8(0x3E)
+#define SPL     _SFR_IO8(0x3D)
+
+/*Battery low configeration register */
+#define BL_CONFIG       _SFR_IO8(0x35)
+
+/*Button detect register*/
+#define B_DET           _SFR_IO8(0x34)
+
+/*AVR Configeration register*/
+#define AVR_CONFIG      _SFR_IO8(0x33)
+
+/* I/O registers */
+
+/*Data in register */
+#define IO_DATIN        _SFR_IO8(0x32)
+
+/*Data out register */
+#define IO_DATOUT       _SFR_IO8(0x31)
+
+/*IO Enable register */
+#define IO_ENAB         _SFR_IO8(0x30)
+
+/* Watchdog Timer Control Register */
+#define WDTCR           _SFR_IO8(0x22)
+
+/* Bit Timer Control Register */
+#define BTCR            _SFR_IO8(0x21)
+
+#define BTCNT           _SFR_IO8(0x20)
+
+/* 
+NOTE: EEPROM name's changed to have D in front on them, per datasheet, but
+you may want to remove the leading D.
+*/
+/* EEPROM Control Register */
+
+/* EEPROM Address Register */
+#define DEEAR           _SFR_IO8(0x1E)
+#define DEEARL          _SFR_IO8(0x1E)
+
+/* EEPROM Data Register */
+#define DEEDR           _SFR_IO8(0x1D)
+/* EEPROM Control Register */
+#define DEECR           _SFR_IO8(0x1C)
+
+/* Lock Detector Configuration Register 2 */
+#define LOCKDET2        _SFR_IO8(0x17)
+
+/* VCO Tuning Register*/
+#define VCOTUNE         _SFR_IO8(0x16)
+
+/* Power Attenuation Control Register */
+#define PWR_ATTEN       _SFR_IO8(0x14)
+
+/* Transmitter Control Register */
+#define TX_CNTL         _SFR_IO8(0x12)
+
+/* Lock Detector Configuration Register 1 */
+#define LOCKDET1        _SFR_IO8(0x10)
+
+
+/* Interrupt vectors */
+
+/* Transmission Done, Bit Timer Flag 2 Interrupt */
+#define TXDONE_vect_num		1
+#define TXDONE_vect			_VECTOR(1)
+#define SIG_TXDONE			_VECTOR(1)
+
+/* Transmit Buffer Empty, Bit Itmer Flag 0 Interrupt */
+#define TXEMPTY_vect_num		2
+#define TXEMPTY_vect			_VECTOR(2)
+#define SIG_TXBE			_VECTOR(2)
+
+#define _VECTORS_SIZE 12
+
+/*
+ *  The Register Bit names are represented by their bit number (0-7).
+ */
+
+/* Lock Detector Configuration Register 1 - LOCKDET1 */
+#define UPOK    4
+#define ENKO    3
+#define BOD     2
+#define CS1     1
+#define CS0     0
+
+/* Transmit Control Register - TX_CNTL */
+#define TXE     5
+#define TXK     4
+#define LOC     2
+
+/* Power Attenuation Control Register - PWR_ATTEN */
+#define PCC2        5
+#define PCC1        4
+#define PCC0        3
+#define PCF2        2
+#define PCF1        1
+#define PCF0        0
+
+/* VCO Tuning Register 6 - VCOTUNE --NOTE: [] removed from names*/
+#define VCOVDET1        7
+#define VCOVDET0        6
+#define VCOTUNE4        4
+#define VCOTUNE3        3
+#define VCOTUNE2        2
+#define VCOTUNE1        1
+#define VCOTUNE0        0
+
+/* Lock Detector Configuration Register 2 - LOCKDET2 --NOTE: [] removed from names*/
+#define EUD         7
+#define LAT         6
+#define ULC2        5
+#define ULC1        4
+#define ULC0        3
+#define LC2         2
+#define LC1         1
+#define LC0         0
+
+/* Data EEPROM Control Register - DEECR */
+#define BSY         3
+#define EEU         2
+#define EEL         1
+#define EER         0
+
+/* Data EEPROM Data Register - DEEDR */
+#define ED7         7
+#define ED6         6
+#define ED5         5
+#define ED4         4
+#define ED3         3
+#define ED2         2
+#define ED1         1
+#define ED0         0
+
+/* Data EEPROM Address Register - DEEAR */
+#define PA6     6
+#define PA5     5
+#define PA4     4
+#define PA3     3
+#define BA2     2  /* B is not a typo! */
+#define BA1     1
+#define BA0     0
+
+/* Bit Timer Count Register - BTCNT */
+#define C7      7
+#define C6      6
+#define C5      5
+#define C4      4
+#define C3      3
+#define C2      2
+#define C1      1
+#define C0      0
+
+/* Bit Timer Control Register - BTCR */
+#define C9      7
+#define C8      6
+#define M1      5
+#define M0      4
+#define IE      3
+#define F2      2
+#define DATA    1
+#define F0      0
+
+/* Watchdog Timer Control Register - WDTCR */
+#define WDTOE       4
+#define WDE         3
+#define WDP2        2
+#define WDP1        1
+#define WDP0        0
+
+/* I/O Enable Register - IO_ENAB */
+#define BOHYST      6
+#define IOE5        5
+#define IOE4        4
+#define IOE3        3
+#define IOE2        2
+#define IOE1        1
+#define IOE0        0
+
+/* Note: No PORTB or whatever, this is the equivalent. */
+/* I/O Data Out Register - IO_DATOUT */
+#define IOO5     5
+#define IOO4     4
+#define IOO3     3
+#define IOO2     2
+#define IOO1     1
+#define IOO0     0
+
+/* Note: No PINB or whatever, this is the equivalent. */
+/* I/O Data In Register - IO_DATIN */
+#define IOI5     5
+#define IOI4     4
+#define IOI3     3
+#define IOI2     2
+#define IOI1     1
+#define IOI0     0
+
+/* AVR Configuration Register - AVR_CONFIG */
+#define ACS1    6
+#define ACS0    5
+#define TM      4
+#define BD      3
+#define BLI     2
+#define SLEEP   1
+#define BBM     0
+
+/* Button Detect Register - B_DET */
+#define BD5     5
+#define BD4     4
+#define BD3     3
+#define BD2     2
+#define BD1     1
+#define BD0     0
+
+/* Battery Low Configuration Register - BL_CONFIG */
+#define BL      7
+#define BLV     6
+#define BL5     5
+#define BL4     4
+#define BL3     3
+#define BL2     2
+#define BL1     1
+#define BL0     0
+
+/* Pointer definition   */
+#define XL      r26
+#define XH      r27
+#define YL      r28
+#define YH      r29
+#define ZL      r30
+#define ZH      r31
+
+/* Constants */
+#define RAMSTART	0x60
+#define RAMEND      0xDF
+#define XRAMEND     RAMEND
+#define E2END       0x7F
+#define E2PAGESIZE  0
+#define FLASHEND    0x07FF
+
+
+/* Fuses */
+#define FUSE_MEMORY_SIZE 0
+
+
+/* Lock Bits */
+#define __LOCK_BITS_EXIST
+
+
+/* Signature */
+#define SIGNATURE_0 0x1E
+#define SIGNATURE_1 0x91
+#define SIGNATURE_2 0x81
+
+
+#endif  /* _AVR_IO86RF401_H_ */

data/cpp/arduino/include/io90pwm1.h

@@ -0,0 +1,1157 @@
+/* Copyright (c) 2005, Andrey Pashchenko
+   Copyright (c) 2007, Anatoly Sokolov
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE. */
+
+/* $Id: io90pwm1.h 2225 2011-03-02 16:27:26Z arcanum $ */
+
+/* avr/iopwm1.h - definitions for AT90PWM1 device */
+
+#ifndef _AVR_IOPWM1_H_
+#define _AVR_IOPWM1_H_ 1
+
+/* This file should only be included from <avr/io.h>, never directly. */
+
+#ifndef _AVR_IO_H_
+#  error "Include <avr/io.h> instead of this file."
+#endif
+
+#ifndef _AVR_IOXXX_H_
+#  define _AVR_IOXXX_H_ "iopwm1.h"
+#else
+#  error "Attempt to include more than one <avr/ioXXX.h> file."
+#endif 
+
+/* I/O registers */
+
+/* Reserved [0x00..0x02] */
+
+/* Port B Input Pins Address */
+#define PINB    _SFR_IO8(0x03)
+/* PINB */
+#define PINB7   7
+#define PINB6   6
+#define PINB5   5
+#define PINB4   4
+#define PINB3   3
+#define PINB2   2
+#define PINB1   1
+#define PINB0   0
+
+/* Port B Data Direction Register */
+#define DDRB    _SFR_IO8(0x04)
+/* DDRB */
+#define DDB7    7
+#define DDB6    6
+#define DDB5    5
+#define DDB4    4
+#define DDB3    3
+#define DDB2    2
+#define DDB1    1
+#define DDB0    0
+
+/* Port B Data Register */
+#define PORTB   _SFR_IO8(0x05)
+/* PORTB */
+#define PB7     7
+#define PB6     6
+#define PB5     5
+#define PB4     4
+#define PB3     3
+#define PB2     2
+#define PB1     1
+#define PB0     0
+
+/* Reserved [0x06..0x08] */
+
+/* Port D Input Pins Address */
+#define PIND    _SFR_IO8(0x09)
+/* PIND */
+#define PIND7   7
+#define PIND6   6
+#define PIND5   5
+#define PIND4   4
+#define PIND3   3
+#define PIND2   2
+#define PIND1   1
+#define PIND0   0
+
+/* Port D Data Direction Register */
+#define DDRD    _SFR_IO8(0x0A)
+/* DDRD */
+#define DDD7    7
+#define DDD6    6
+#define DDD5    5
+#define DDD4    4
+#define DDD3    3
+#define DDD2    2
+#define DDD1    1
+#define DDD0    0
+
+/* Port D Data Register */
+#define PORTD   _SFR_IO8(0x0B)
+/* PORTD */
+#define PD7     7
+#define PD6     6
+#define PD5     5
+#define PD4     4
+#define PD3     3
+#define PD2     2
+#define PD1     1
+#define PD0     0
+
+/* Port E Input Pins Address */
+#define PINE    _SFR_IO8(0x0C)
+/* PINE */
+#define PINE2   2
+#define PINE1   1
+#define PINE0   0
+
+/* Port E Data Direction Register */
+#define DDRE    _SFR_IO8(0x0D)
+/* DDRE */
+#define DDE2    2
+#define DDE1    1
+#define DDE0    0
+
+/* Port E Data Register */
+#define PORTE   _SFR_IO8(0x0E)
+/* PORTE */
+#define PE2     2
+#define PE1     1
+#define PE0     0
+
+/* Reserved [0x0F..0x14] */
+
+/* Timer/Counter 0 Interrupt Flag Register */
+#define TIFR0   _SFR_IO8(0x15)
+/* TIFR0 */
+#define OCF0B   2   /* Output Compare Flag 0B */
+#define OCF0A   1   /* Output Compare Flag 0A */
+#define TOV0    0   /* Overflow Flag */
+
+/* Timer/Counter1 Interrupt Flag Register */
+#define TIFR1   _SFR_IO8(0x16)
+/* TIFR1 */
+#define ICF1    5   /* Input Capture Flag 1 */
+#define OCF1B   2   /* Output Compare Flag 1B*/
+#define OCF1A   1   /* Output Compare Flag 1A*/
+#define TOV1    0   /* Overflow Flag */
+
+/* Reserved [0x17..0x18] */
+
+/* General Purpose I/O Register 1 */
+#define GPIOR1  _SFR_IO8(0x19)
+/* GPIOR1 */
+#define GPIOR17 7
+#define GPIOR16 6
+#define GPIOR15 5
+#define GPIOR14 4
+#define GPIOR13 3
+#define GPIOR12 2
+#define GPIOR11 1
+#define GPIOR10 0
+
+/* General Purpose I/O Register 2 */
+#define GPIOR2  _SFR_IO8(0x1A)
+/* GPIOR2 */
+#define GPIOR27 7
+#define GPIOR26 6
+#define GPIOR25 5
+#define GPIOR24 4
+#define GPIOR23 3
+#define GPIOR22 2
+#define GPIOR21 1
+#define GPIOR20 0
+
+/* General Purpose I/O Register 3 */
+#define GPIOR3  _SFR_IO8(0x1B)
+/* GPIOR3 */
+#define GPIOR37 7
+#define GPIOR36 6
+#define GPIOR35 5
+#define GPIOR34 4
+#define GPIOR33 3
+#define GPIOR32 2
+#define GPIOR31 1
+#define GPIOR30 0
+
+/* External Interrupt Flag Register */
+#define EIFR    _SFR_IO8(0x1C)
+/* EIFR */
+#define INTF3   3
+#define INTF2   2
+#define INTF1   1
+#define INTF0   0
+
+/* External Interrupt Mask Register */
+#define EIMSK   _SFR_IO8(0x1D)
+/* EIMSK */
+#define INT3    3   /* External Interrupt Request 3 Enable */
+#define INT2    2   /* External Interrupt Request 2 Enable */
+#define INT1    1   /* External Interrupt Request 1 Enable */
+#define INT0    0   /* External Interrupt Request 0 Enable */
+
+/* General Purpose I/O Register 0 */
+#define GPIOR0  _SFR_IO8(0x1E)
+/* GPIOR0 */
+#define GPIOR07 7
+#define GPIOR06 6
+#define GPIOR05 5
+#define GPIOR04 4
+#define GPIOR03 3
+#define GPIOR02 2
+#define GPIOR01 1
+#define GPIOR00 0
+
+/* EEPROM Control Register */
+#define EECR    _SFR_IO8(0x1F)
+/* EECR */
+#define EERIE   3   /* EEPROM Ready Interrupt Enable */
+#define EEMWE   2   /* EEPROM Master Write Enable */
+#define EEWE    1   /* EEPROM Write Enable */
+#define EERE    0   /* EEPROM Read Enable */
+
+/* EEPROM Data Register */
+#define EEDR    _SFR_IO8(0x20)
+/* EEDR */
+#define EEDR7   7
+#define EEDR6   6
+#define EEDR5   5
+#define EEDR4   4
+#define EEDR3   3
+#define EEDR2   2
+#define EEDR1   1
+#define EEDR0   0
+
+/* The EEPROM Address Registers */
+#define EEAR    _SFR_IO16(0x21)
+#define EEARL   _SFR_IO8(0x21)
+#define EEARH   _SFR_IO8(0x22)
+/* EEARH */
+#define EEAR11  3
+#define EEAR10  2
+#define EEAR9   1
+#define EEAR8   0
+/* EEARL */
+#define EEAR7   7
+#define EEAR6   6
+#define EEAR5   5
+#define EEAR4   4
+#define EEAR3   3
+#define EEAR2   2
+#define EEAR1   1
+#define EEAR0   0
+
+/* 6-char sequence denoting where to find the EEPROM registers in memory space.
+   Adresses denoted in hex syntax with uppercase letters. Used by the EEPROM
+   subroutines.
+   First two letters:  EECR address.
+   Second two letters: EEDR address.
+   Last two letters:   EEAR address.  */
+#define __EEPROM_REG_LOCATIONS__ 1F2021
+
+/* General Timer/Counter Control Register */
+#define GTCCR   _SFR_IO8(0x23)
+/* GTCCR */
+#define TSM     7   /* Timer/Counter Synchronization Mode */
+#define ICPSEL1 6   /* Timer1 Input Capture Selection Bit */
+#define PSRSYNC 0
+
+/* Timer/Counter Control Register A */
+#define TCCR0A  _SFR_IO8(0x24)
+/* TCCR0A */
+#define COM0A1  7   /* Compare Output Mode, Phase Correct PWM Mode */
+#define COM0A0  6   /* Compare Output Mode, Phase Correct PWM Mode */
+#define COM0B1  5   /* Compare Output Mode, Fast PWm */
+#define COM0B0  4   /* Compare Output Mode, Fast PWm */
+#define WGM01   1   /* Waveform Generation Mode */
+#define WGM00   0   /* Waveform Generation Mode */
+
+/* Timer/Counter Control Register B */
+#define TCCR0B  _SFR_IO8(0x25)
+/* TCCR0B */
+#define FOC0A   7   /* Force Output Compare A */
+#define FOC0B   6   /* Force Output Compare B */
+#define WGM02   3   /* Waveform Generation Mode */
+#define CS02    2   /* Clock Select */
+#define CS01    1   /* Clock Select */
+#define CS00    0   /* Clock Select */
+
+/* Timer/Counter0 Register */
+#define TCNT0   _SFR_IO8(0x26)
+/* TCNT0 */
+#define TCNT07  7
+#define TCNT06  6
+#define TCNT05  5
+#define TCNT04  4
+#define TCNT03  3
+#define TCNT02  2
+#define TCNT01  1
+#define TCNT00  0
+
+/* Timer/Counter0 Output Compare Register A */
+#define OCR0A   _SFR_IO8(0x27)
+/* OCR0A */
+#define OCR0A7  7
+#define OCR0A6  6
+#define OCR0A5  5
+#define OCR0A4  4
+#define OCR0A3  3
+#define OCR0A2  2
+#define OCR0A1  1
+#define OCR0A0  0
+
+/* Timer/Counter0 Output Compare Register B */
+#define OCR0B   _SFR_IO8(0x28)
+/* OCR0B */
+#define OCR0B7  7
+#define OCR0B6  6
+#define OCR0B5  5
+#define OCR0B4  4
+#define OCR0B3  3
+#define OCR0B2  2
+#define OCR0B1  1
+#define OCR0B0  0
+
+/* PLL Control and Status Register */
+#define PLLCSR  _SFR_IO8(0x29)
+/* PLLCSR */
+#define PLLF    2
+#define PLLE    1   /* PLL Enable */
+#define PLOCK   0   /* PLL Lock Detector */
+
+/* Reserved [0x2A..0x2B] */
+
+/* SPI Control Register */
+#define SPCR    _SFR_IO8(0x2C)
+/* SPCR */
+#define SPIE    7   /* SPI Interrupt Enable */
+#define SPE     6   /* SPI Enable */
+#define DORD    5   /* Data Order */
+#define MSTR    4   /* Master/Slave Select */
+#define CPOL    3   /* Clock polarity */
+#define CPHA    2   /* Clock Phase */
+#define SPR1    1   /* SPI Clock Rate Select 1 */
+#define SPR0    0   /* SPI Clock Rate Select 0 */
+
+/* SPI Status Register */
+#define SPSR    _SFR_IO8(0x2D)
+/* SPSR */
+#define SPIF    7   /* SPI Interrupt Flag */
+#define WCOL    6   /* Write Collision Flag */
+#define SPI2X   0   /* Double SPI Speed Bit */
+
+/* SPI Data Register */
+#define SPDR    _SFR_IO8(0x2E)
+/* SPDR */
+#define SPD7    7
+#define SPD6    6
+#define SPD5    5
+#define SPD4    4
+#define SPD3    3
+#define SPD2    2
+#define SPD1    1
+#define SPD0    0
+
+/* Reserved [0x2F] */
+
+/* Analog Comparator Status Register */
+#define ACSR    _SFR_IO8(0x30)
+/* ACSR */
+#define ACCKDIV 7   /* Analog Comparator Clock Divider */
+#define AC2IF   6   /* Analog Comparator 2 Interrupt Flag Bit */
+#define AC0IF   4   /* Analog Comparator 0 Interrupt Flag Bit */
+#define AC2O    2   /* Analog Comparator 2 Output Bit */
+#define AC0O    0   /* Analog Comparator 0 Output Bit */
+
+/* Monitor Data Register */
+#define MONDR   _SFR_IO8(0x31)
+
+/* Monitor Stop Mode Control Register */
+#define MSMCR   _SFR_IO8(0x32)
+
+/* Sleep Mode Control Register */
+#define SMCR    _SFR_IO8(0x33)
+/* SMCR */
+#define SM2     3   /* Sleep Mode Select bit2 */
+#define SM1     2   /* Sleep Mode Select bit1 */
+#define SM0     1   /* Sleep Mode Select bit0 */
+#define SE      0   /* Sleep Enable */
+
+/* MCU Status Register */
+#define MCUSR   _SFR_IO8(0x34)
+/* MCUSR */
+#define WDRF    3   /* Watchdog Reset Flag */
+#define BORF    2   /* Brown-out Reset Flag */
+#define EXTRF   1   /* External Reset Flag */
+#define PORF    0   /* Power-on reset flag */
+
+/* MCU Control Register */
+#define MCUCR   _SFR_IO8(0x35)
+/* MCUCR */
+#define SPIPS   7   /* SPI Pin Select */
+#define PUD     4   /* Pull-up disable */
+#define IVSEL   1   /* Interrupt Vector Select */
+#define IVCE    0   /* Interrupt Vector Change Enable */
+
+/* Reserved [0x36] */
+
+/* Store Program Memory Control Register */
+#define SPMCSR  _SFR_IO8(0x37)
+/* SPMCSR */
+#define SPMIE   7   /* SPM Interrupt Enable */
+#define RWWSB   6   /* Read While Write Section Busy */
+#define RWWSRE  4   /* Read While Write section read enable */
+#define BLBSET  3   /* Boot Lock Bit Set */
+#define PGWRT   2   /* Page Write */
+#define PGERS   1   /* Page Erase */
+#define SPMEN   0   /* Store Program Memory Enable */
+
+/* Reserved [0x38..0x3C] */
+
+/* 0x3D..0x3E SP  [defined in <avr/io.h>] */
+/* 0x3F SREG      [defined in <avr/io.h>] */
+
+/* Watchdog Timer Control Register */
+#define WDTCSR  _SFR_MEM8(0x60)
+/* WDTCSR */
+#define WDIF    7   /* Watchdog Timeout Interrupt Flag */
+#define WDIE    6   /* Watchdog Timeout Interrupt Enable */
+#define WDP3    5   /* Watchdog Timer Prescaler bit3 */
+#define WDCE    4   /* Watchdog Change Enable */
+#define WDE     3   /* Watchdog Enable */
+#define WDP2    2   /* Watchdog Timer Prescaler bit2 */
+#define WDP1    1   /* Watchdog Timer Prescaler bit1 */
+#define WDP0    0   /* Watchdog Timer Prescaler bit0 */
+
+/* Clock Prescaler Register */
+#define CLKPR   _SFR_MEM8(0x61)
+/* CLKPR */
+#define CLKPCE  7   /* Clock Prescaler Change Enable */
+#define CLKPS3  3   /* Clock Prescaler Select bit3 */
+#define CLKPS2  2   /* Clock Prescaler Select bit2 */
+#define CLKPS1  1   /* Clock Prescaler Select bit1 */
+#define CLKPS0  0   /* Clock Prescaler Select bit0 */
+
+/* Reserved [0x62..0x63] */
+
+/* Power Reduction Register */
+#define PRR     _SFR_MEM8(0x64)
+/* PRR */
+#define PRPSC2  7   /* Power Reduction PSC2 */
+#define PRPSC1  6   /* Power Reduction PSC1 */
+#define PRPSC0  5   /* Power Reduction PSC0 */
+#define PRTIM1  4   /* Power Reduction Timer/Counter1 */
+#define PRTIM0  3   /* Power Reduction Timer/Counter0 */
+#define PRSPI   2   /* Power Reduction Serial Peripheral Interface */
+#define PRADC   0   /* Power Reduction ADC */
+
+#define __AVR_HAVE_PRR	((1<<PRADC)|(1<<PRSPI)|(1<<PRTIM0)|(1<<PRTIM1)|(1<<PRPSC0)|(1<<PRPSC1)|(1<<PRPSC2))
+#define __AVR_HAVE_PRR_PRADC
+#define __AVR_HAVE_PRR_PRSPI
+#define __AVR_HAVE_PRR_PRTIM0
+#define __AVR_HAVE_PRR_PRTIM1
+#define __AVR_HAVE_PRR_PRPSC0
+#define __AVR_HAVE_PRR_PRPSC1
+#define __AVR_HAVE_PRR_PRPSC2
+
+/* Reserved [0x65] */
+
+/* Oscillator Calibration Value */
+#define OSCCAL  _SFR_MEM8(0x66)
+/* OSCCAL */
+#define CAL6    6
+#define CAL5    5
+#define CAL4    4
+#define CAL3    3
+#define CAL2    2
+#define CAL1    1
+#define CAL0    0
+
+/* Reserved [0x67..0x68] */
+
+/* External Interrupt Control Register A */
+#define EICRA   _SFR_MEM8(0x69)
+/* EICRA */
+#define ISC31   7
+#define ISC30   6
+#define ISC21   5
+#define ISC20   4
+#define ISC11   3
+#define ISC10   2
+#define ISC01   1
+#define ISC00   0
+
+/* Reserved [0x6A..0x6D] */
+
+/* Timer/Counter0 Interrupt Mask Register */
+#define TIMSK0  _SFR_MEM8(0x6E)
+/* TIMSK0 */
+#define OCIE0B  2   /* Output Compare Match B Interrupt Enable */
+#define OCIE0A  1   /* Output Compare Match A Interrupt Enable */
+#define TOIE0   0   /* Overflow Interrupt Enable */
+
+/* Timer/Counter1 Interrupt Mask Register */
+#define TIMSK1  _SFR_MEM8(0x6F)
+/* TIMSK1 */
+#define ICIE1   5   /* Input Capture Interrupt Enable */
+#define OCIE1B  2   /* Output Compare Match B Interrupt Enable */
+#define OCIE1A  1   /* Output Compare Match A Interrupt Enable */
+#define TOIE1   0   /* Overflow Interrupt Enable */
+
+/* Reserved [0x70..0x75] */
+
+/* Amplifier 0 Control and Status register */
+#define AMP0CSR _SFR_MEM8(0x76)
+#define AMP0EN  7
+#define AMP0IS  6
+#define AMP0G1  5
+#define AMP0G0  4
+#define AMP0TS1 1
+#define AMP0TS0 0
+
+/* Reserved [0x77] */
+
+/* ADC Result Data Register */
+#ifndef __ASSEMBLER__
+#define ADC     _SFR_MEM16(0x78)
+#endif
+#define ADCW    _SFR_MEM16(0x78)
+#define ADCL    _SFR_MEM8(0x78)
+#define ADCH    _SFR_MEM8(0x79)
+
+/* ADC Control and Status Register A */
+#define ADCSRA  _SFR_MEM8(0x7A)
+/* ADCSRA */
+#define ADEN    7   /* ADC Enable */
+#define ADSC    6   /* ADC Start Conversion */
+#define ADATE   5   /* ADC Auto Trigger Enable */
+#define ADIF    4   /* ADC Interrupt Flag */
+#define ADIE    3   /* ADC Interrupt Enable */
+#define ADPS2   2   /* ADC Prescaler Select bit2 */
+#define ADPS1   1   /* ADC Prescaler Select bit1 */
+#define ADPS0   0   /* ADC Prescaler Select bit0 */
+
+/* ADC Control and Status Register B */
+#define ADCSRB  _SFR_MEM8(0x7B)
+/* ADCSRB */
+#define ADTS3   3   /* ADC Auto Trigger Source 2 */
+#define ADTS2   2   /* ADC Auto Trigger Source 2 */
+#define ADTS1   1   /* ADC Auto Trigger Source 1 */
+#define ADTS0   0   /* ADC Auto Trigger Source 0 */
+
+/* ADC multiplexer Selection Register */
+#define ADMUX   _SFR_MEM8(0x7C)
+/* ADMUX */
+#define REFS1   7   /* Reference Selection bit1 */
+#define REFS0   6   /* Reference Selection bit0 */
+#define ADLAR   5   /* Left Adjust Result */
+#define MUX3    3   /* Analog Channel and Gain Selection bit3 */
+#define MUX2    2   /* Analog Channel and Gain Selection bit2 */
+#define MUX1    1   /* Analog Channel and Gain Selection bit1 */
+#define MUX0    0   /* Analog Channel and Gain Selection bit0 */
+
+/* Reserved [0x7D] */
+
+/* Digital Input Disable Register 0 */
+#define DIDR0   _SFR_MEM8(0x7E)
+/* DIDR0 */
+#define ADC7D   7   /* ADC7 Digital input Disable */
+#define ADC6D   6   /* ADC6 Digital input Disable */
+#define ADC5D   5   /* ADC5 Digital input Disable */
+#define ADC4D   4   /* ADC4 Digital input Disable */
+#define ADC3D   3   /* ADC3 Digital input Disable */
+#define ADC2D   2   /* ADC2 Digital input Disable */
+#define ADC1D   1   /* ADC1 Digital input Disable */
+#define ADC0D   0   /* ADC0 Digital input Disable */
+
+/* Digital Input Disable Register 1 */
+#define DIDR1   _SFR_MEM8(0x7F)
+/* DIDR1 */
+#define ACMP0D  5
+#define AMP0PD  4
+#define AMP0ND  3
+#define ADC10D  2   /* ADC10 Digital input Disable */
+#define ADC9D   1   /* ADC9 Digital input Disable */
+#define ADC8D   0   /* ADC8 Digital input Disable */
+
+/* Timer/Counter1 Control Register A */
+#define TCCR1A  _SFR_MEM8(0x80)
+/* TCCR1A */
+#define COM1A1  7   /* Comparet Ouput Mode 1A, bit 1 */
+#define COM1A0  6   /* Comparet Ouput Mode 1A, bit 0 */
+#define COM1B1  5   /* Compare Output Mode 1B, bit 1 */
+#define COM1B0  4   /* Compare Output Mode 1B, bit 0 */
+#define WGM11   1   /* Waveform Generation Mode */
+#define WGM10   0   /* Waveform Generation Mode */
+
+/* Timer/Counter1 Control Register B */
+#define TCCR1B  _SFR_MEM8(0x81)
+/* TCCR1B */
+#define ICNC1   7   /* Input Capture 1 Noise Canceler */
+#define ICES1   6   /* Input Capture 1 Edge Select */
+#define WGM13   4   /* Waveform Generation Mode */
+#define WGM12   3   /* Waveform Generation Mode */
+#define CS12    2   /* Prescaler source of Timer/Counter 1 */
+#define CS11    1   /* Prescaler source of Timer/Counter 1 */
+#define CS10    0   /* Prescaler source of Timer/Counter 1 */
+
+/* Timer/Counter1 Control Register C */
+#define TCCR1C  _SFR_MEM8(0x82)
+/* TCCR1C */
+#define FOC1A   7   /* Force Output Compare for Channel A */
+#define FOC1B   6   /* Force Output Compare for Channel B */
+
+/* Reserved [0x83] */
+
+/* Timer/Counter1 */
+#define TCNT1   _SFR_MEM16(0x84)
+#define TCNT1L  _SFR_MEM8(0x84)
+#define TCNT1H  _SFR_MEM8(0x85)
+/* TCNT1H */
+#define TCNT115 7
+#define TCNT114 6
+#define TCNT113 5
+#define TCNT112 4
+#define TCNT111 3
+#define TCNT110 2
+#define TCNT19  1
+#define TCNT18  0
+/* TCNT1L */
+#define TCNT17  7
+#define TCNT16  6
+#define TCNT15  5
+#define TCNT14  4
+#define TCNT13  3
+#define TCNT12  2
+#define TCNT11  1
+#define TCNT10  0
+
+/* Input Capture Register 1 */
+#define ICR1    _SFR_MEM16(0x86)
+#define ICR1L   _SFR_MEM8(0x86)
+#define ICR1H   _SFR_MEM8(0x87)
+/* ICR1H */
+#define ICR115  7
+#define ICR114  6
+#define ICR113  5
+#define ICR112  4
+#define ICR111  3
+#define ICR110  2
+#define ICR19   1
+#define ICR18   0
+/* ICR1L */
+#define ICR17   7
+#define ICR16   6
+#define ICR15   5
+#define ICR14   4
+#define ICR13   3
+#define ICR12   2
+#define ICR11   1
+#define ICR10   0
+
+/* Output Compare Register 1 A */
+#define OCR1A   _SFR_MEM16(0x88)
+#define OCR1AL  _SFR_MEM8(0x88)
+#define OCR1AH  _SFR_MEM8(0x89)
+/* OCR1AH */
+#define OCR1A15 7
+#define OCR1A14 6
+#define OCR1A13 5
+#define OCR1A12 4
+#define OCR1A11 3
+#define OCR1A10 2
+#define OCR1A9  1
+#define OCR1A8  0
+/* OCR1AL */
+#define OCR1A7  7
+#define OCR1A6  6
+#define OCR1A5  5
+#define OCR1A4  4
+#define OCR1A3  3
+#define OCR1A2  2
+#define OCR1A1  1
+#define OCR1A0  0
+
+/* Output Compare Register 1 B */
+#define OCR1B   _SFR_MEM16(0x8A)
+#define OCR1BL  _SFR_MEM8(0x8A)
+#define OCR1BH  _SFR_MEM8(0x8B)
+/* OCR1BH */
+#define OCR1B15 7
+#define OCR1B14 6
+#define OCR1B13 5
+#define OCR1B12 4
+#define OCR1B11 3
+#define OCR1B10 2
+#define OCR1B9  1
+#define OCR1B8  0
+/* OCR1BL */
+#define OCR1B7  7
+#define OCR1B6  6
+#define OCR1B5  5
+#define OCR1B4  4
+#define OCR1B3  3
+#define OCR1B2  2
+#define OCR1B1  1
+#define OCR1B0  0
+
+/* Reserved [0x8C..0x9F] */
+
+/* PSC0 Interrupt Flag Register */
+#define PIFR0   _SFR_MEM8(0xA0)
+/* PIFR0 */
+#define PSEI0   5   /* PSC0 Synchro Error Interrupt */
+#define PEV0B   4   /* PSC0 External Event B Interrupt */
+#define PEV0A   3   /* PSC0 External Event A Interrupt */
+#define PRN01   2   /* PSC0 Ramp Number bit1 */
+#define PRN00   1   /* PSC0 Ramp Number bit0 */
+#define PEOP0   0   /* End Of PSC0 Interrupt */
+
+/* PSC0 Interrupt Mask Register */
+#define PIM0    _SFR_MEM8(0xA1)
+/* PIM0 */
+#define PSEIE0  5   /* PSC0 Synchro Error Interrupt Enable */
+#define PEVE0B  4   /* PSC0 External Event B Interrupt Enable */
+#define PEVE0A  3   /* PSC0 External Event A Interrupt Enable */
+#define PEOPE0  0   /* PSC0 End Of Cycle Interrupt Enable */
+
+/* Reserved [0xA2..0xA3] */
+
+/* PSC2 Interrupt Flag Register */
+#define PIFR2   _SFR_MEM8(0xA4)
+/* PIFR2 */
+#define PSEI2   5   /* PSC2 Synchro Error Interrupt */
+#define PEV2B   4   /* PSC2 External Event B Interrupt */
+#define PEV2A   3   /* PSC2 External Event A Interrupt */
+#define PRN21   2   /* PSC2 Ramp Number bit1 */
+#define PRN20   1   /* PSC2 Ramp Number bit0 */
+#define PEOP2   0   /* End Of PSC2 Interrupt */
+
+/* PSC2 Interrupt Mask Register */
+#define PIM2    _SFR_MEM8(0xA5)
+/* PIM2 */
+#define PSEIE2  5   /* PSC2 Synchro Error Interrupt Enable */
+#define PEVE2B  4   /* PSC2 External Event B Interrupt Enable */
+#define PEVE2A  3   /* PSC2 External Event A Interrupt Enable */
+#define PEOPE2  0   /* PSC2 End Of Cycle Interrupt Enable */
+
+/* Reserved [0xA6..0xAC] */
+
+/* Analog Comparator 0 Control Register */
+#define AC0CON  _SFR_MEM8(0xAD)
+/* AC0CON */
+#define AC0EN   7   /* Analog Comparator 0 Enable Bit */
+#define AC0IE   6   /* Analog Comparator 0 Interrupt Enable bit */
+#define AC0IS1  5   /* Analog Comparator 0 Interrupt Select bit1 */
+#define AC0IS0  4   /* Analog Comparator 0 Interrupt Select bit0 */
+#define AC0M2   2   /* Analog Comparator 0 Multiplexer register bit2 */
+#define AC0M1   1   /* Analog Comparator 0 Multiplexer register bit1 */
+#define AC0M0   0   /* Analog Comparator 0 Multiplexer register bit0 */
+
+/* Reserved [0xB0..0xAE] */
+
+/* Analog Comparator 2 Control Register */
+#define AC2CON  _SFR_MEM8(0xAF)
+/* AC2CON */
+#define AC2EN   7   /* Analog Comparator 2 Enable Bit */
+#define AC2IE   6   /* Analog Comparator 2 Interrupt Enable bit */
+#define AC2IS1  5   /* Analog Comparator 2 Interrupt Select bit1 */
+#define AC2IS0  4   /* Analog Comparator 2 Interrupt Select bit0 */
+#define AC2M2   2   /* Analog Comparator 2 Multiplexer register bit2 */
+#define AC2M1   1   /* Analog Comparator 2 Multiplexer register bit1 */
+#define AC2M0   0   /* Analog Comparator 2 Multiplexer register bit0 */
+
+/* Reserved [0xB0..0xCF] */
+
+/* PSC 0 Synchro and Output Configuration */
+#define PSOC0   _SFR_MEM8(0xD0)
+/* PSOC0 */
+#define PSYNC01 5   /* Synchronization Out for ADC Selection bit1 */
+#define PSYNC00 4   /* Synchronization Out for ADC Selection bit0 */
+#define POEN0B  2   /* PSC 0 OUT Part B Output Enable */
+#define POEN0A  0   /* PSC 0 OUT Part A Output Enable */
+
+/* Reserved [0xD1] */
+
+/* Output Compare SA Registers */
+#define OCR0SA  _SFR_MEM16(0xD2)
+#define OCR0SAL _SFR_MEM8(0xD2)
+#define OCR0SAH _SFR_MEM8(0xD3)
+
+/* Output Compare RA Registers */
+#define OCR0RA  _SFR_MEM16(0xD4)
+#define OCR0RAL _SFR_MEM8(0xD4)
+#define OCR0RAH _SFR_MEM8(0xD5)
+
+/* Output Compare SB Registers */
+#define OCR0SB  _SFR_MEM16(0xD6)
+#define OCR0SBL _SFR_MEM8(0xD6)
+#define OCR0SBH _SFR_MEM8(0xD7)
+
+/* Output Compare RB Registers */
+#define OCR0RB  _SFR_MEM16(0xD8)
+#define OCR0RBL _SFR_MEM8(0xD8)
+#define OCR0RBH _SFR_MEM8(0xD9)
+
+/* PSC 0 Configuration Register */
+#define PCNF0   _SFR_MEM8(0xDA)
+/* PCNF0 */
+#define PFIFTY0  7  /* PSC 0 Fifty */
+#define PALOCK0  6  /* PSC 0 Autolock */
+#define PLOCK0   5  /* PSC 0 Lock */
+#define PMODE01  4  /* PSC 0 Mode bit1 */
+#define PMODE00  3  /* PSC 0 Mode bit0 */
+#define POP0     2  /* PSC 0 Output Polarity */
+#define PCLKSEL0 1  /* PSC 0 Input Clock Select */
+
+/* PSC 0 Control Register */
+#define PCTL0   _SFR_MEM8(0xDB)
+/* PCTL0 */
+#define PPRE01  7   /* PSC 0 Prescaler Select bit1 */
+#define PPRE00  6   /* PSC 0 Prescaler Select bit0 */
+#define PBFM0   5   /* Balance Flank Width Modulation */
+#define PAOC0B  4   /* PSC 0 Asynchronous Output Control B */
+#define PAOC0A  3   /* PSC 0 Asynchronous Output Control A */
+#define PARUN0  2   /* PSC 0 Autorun */
+#define PCCYC0  1   /* PSC 0 Complete Cycle */
+#define PRUN0   0   /* PSC 0 Run */
+
+/* PSC 0 Input A Control Register */
+#define PFRC0A  _SFR_MEM8(0xDC)
+/* PFRC0A */
+#define PCAE0A  7   /* PSC 0 Capture Enable Input Part A */
+#define PISEL0A 6   /* PSC 0 Input Select for Part A */
+#define PELEV0A 5   /* PSC 0 Edge Level Selector of Input Part A */
+#define PFLTE0A 4   /* PSC 0 Filter Enable on Input Part A */
+#define PRFM0A3 3   /* PSC 0 Fault Mode bit3 */
+#define PRFM0A2 2   /* PSC 0 Fault Mode bit2 */
+#define PRFM0A1 1   /* PSC 0 Fault Mode bit1 */
+#define PRFM0A0 0   /* PSC 0 Fault Mode bit0 */
+
+/* PSC 0 Input B Control Register */
+#define PFRC0B  _SFR_MEM8(0xDD)
+/* PFRC0B */
+#define PCAE0B  7   /* PSC 0 Capture Enable Input Part B */
+#define PISEL0B 6   /* PSC 0 Input Select for Part B */
+#define PELEV0B 5   /* PSC 0 Edge Level Selector of Input Part B */
+#define PFLTE0B 4   /* PSC 0 Filter Enable on Input Part B */
+#define PRFM0B3 3   /* PSC 0 Fault Mode bit3 */
+#define PRFM0B2 2   /* PSC 0 Fault Mode bit2 */
+#define PRFM0B1 1   /* PSC 0 Fault Mode bit1 */
+#define PRFM0B0 0   /* PSC 0 Fault Mode bit0 */
+
+/* PSC 0 Input Capture Registers */
+#define PICR0   _SFR_MEM16(0xDE)
+
+#define PICR0L  _SFR_MEM8(0xDE)
+
+#define PICR0H  _SFR_MEM8(0xDF)
+#define PCST0   7   /* PSC Capture Software Trig bit */
+
+/* Reserved [0xE0..0xEF] */
+
+/* PSC 2 Synchro and Output Configuration */
+#define PSOC2   _SFR_MEM8(0xF0)
+/* PSOC2 */
+#define POS23   7   /* PSCOUT23 Selection */
+#define POS22   6   /* PSCOUT22 Selection */
+#define PSYNC21 5   /* Synchronization Out for ADC Selection bit1 */
+#define PSYNC20 4   /* Synchronization Out for ADC Selection bit0 */
+#define POEN2D  3   /* PSCOUT23 Output Enable */
+#define POEN2B  2   /* PSC 2 OUT Part B Output Enable */
+#define POEN2C  1   /* PSCOUT22 Output Enable */
+#define POEN2A  0   /* PSC 2 OUT Part A Output Enable */
+
+/* PSC 2 Output Matrix */
+#define POM2    _SFR_MEM8(0xF1)
+/* POM2 */
+#define POMV2B3 7   /* Output Matrix Output B Ramp 3 */
+#define POMV2B2 6   /* Output Matrix Output B Ramp 2 */
+#define POMV2B1 5   /* Output Matrix Output B Ramp 1 */
+#define POMV2B0 4   /* Output Matrix Output B Ramp 0 */
+#define POMV2A3 3   /* Output Matrix Output A Ramp 3 */
+#define POMV2A2 2   /* Output Matrix Output A Ramp 2 */
+#define POMV2A1 1   /* Output Matrix Output A Ramp 1 */
+#define POMV2A0 0   /* Output Matrix Output A Ramp 0 */
+
+/* Output Compare SA Registers */
+#define OCR2SA  _SFR_MEM16(0xF2)
+#define OCR2SAL _SFR_MEM8(0xF2)
+#define OCR2SAH _SFR_MEM8(0xF3)
+
+/* Output Compare RA Registers */
+#define OCR2RA  _SFR_MEM16(0xF4)
+#define OCR2RAL _SFR_MEM8(0xF4)
+#define OCR2RAH _SFR_MEM8(0xF5)
+
+/* Output Compare SB Registers */
+#define OCR2SB  _SFR_MEM16(0xF6)
+#define OCR2SBL _SFR_MEM8(0xF6)
+#define OCR2SBH _SFR_MEM8(0xF7)
+
+/* Output Compare RB Registers */
+#define OCR2RB  _SFR_MEM16(0xF8)
+#define OCR2RBL _SFR_MEM8(0xF8)
+#define OCR2RBH _SFR_MEM8(0xF9)
+
+/* PSC 2 Configuration Register */
+#define PCNF2   _SFR_MEM8(0xFA)
+/* PCNF2 */
+#define PFIFTY2  7  /* PSC 2 Fifty */
+#define PALOCK2  6  /* PSC 2 Autolock */
+#define PLOCK2   5  /* PSC 2 Lock */
+#define PMODE21  4  /* PSC 2 Mode bit1 */
+#define PMODE20  3  /* PSC 2 Mode bit0 */
+#define POP2     2  /* PSC 2 Output Polarity */
+#define PCLKSEL2 1  /* PSC 2 Input Clock Select */
+#define POME2    0  /* PSC 2 Output Matrix Enable */
+
+/* PSC 2 Control Register */
+#define PCTL2   _SFR_MEM8(0xFB)
+/* PCTL2 */
+#define PPRE21  7   /* PSC 2 Prescaler Select bit1 */
+#define PPRE20  6   /* PSC 2 Prescaler Select bit0 */
+#define PBFM2   5   /* Balance Flank Width Modulation */
+#define PAOC2B  4   /* PSC 2 Asynchronous Output Control B */
+#define PAOC2A  3   /* PSC 2 Asynchronous Output Control A */
+#define PARUN2  2   /* PSC 2 Autorun */
+#define PCCYC2  1   /* PSC 2 Complete Cycle */
+#define PRUN2   0   /* PSC 2 Run */
+
+/* PSC 2 Input A Control Register */
+#define PFRC2A  _SFR_MEM8(0xFC)
+/* PFRC2A */
+#define PCAE2A  7   /* PSC 2 Capture Enable Input Part A */
+#define PISEL2A 6   /* PSC 2 Input Select for Part A */
+#define PELEV2A 5   /* PSC 2 Edge Level Selector of Input Part A */
+#define PFLTE2A 4   /* PSC 2 Filter Enable on Input Part A */
+#define PRFM2A3 3   /* PSC 2 Fault Mode bit3 */
+#define PRFM2A2 2   /* PSC 2 Fault Mode bit2 */
+#define PRFM2A1 1   /* PSC 2 Fault Mode bit1 */
+#define PRFM2A0 0   /* PSC 2 Fault Mode bit0 */
+
+/* PSC 2 Input B Control Register */
+#define PFRC2B  _SFR_MEM8(0xFD)
+/* PFRC2B */
+#define PCAE2B  7   /* PSC 2 Capture Enable Input Part B */
+#define PISEL2B 6   /* PSC 2 Input Select for Part B */
+#define PELEV2B 5   /* PSC 2 Edge Level Selector of Input Part B */
+#define PFLTE2B 4   /* PSC 2 Filter Enable on Input Part B */
+#define PRFM2B3 3   /* PSC 2 Fault Mode bit3 */
+#define PRFM2B2 2   /* PSC 2 Fault Mode bit2 */
+#define PRFM2B1 1   /* PSC 2 Fault Mode bit1 */
+#define PRFM2B0 0   /* PSC 2 Fault Mode bit0 */
+
+/* PSC 2 Input Capture Registers */
+#define PICR2   _SFR_MEM16(0xFE)
+
+#define PICR2L  _SFR_MEM8(0xFE)
+
+#define PICR2H  _SFR_MEM8(0xFF)
+#define PCST2   7   /* PSC Capture Software Trig bit */
+                    /* not implemented on AT90PWM2/AT90PWM3 */
+
+
+/* Interrupt vectors */
+/* PSC2 Capture Event */
+#define PSC2_CAPT_vect_num		1
+#define PSC2_CAPT_vect			_VECTOR(1)
+#define SIG_PSC2_CAPTURE		_VECTOR(1)
+
+/* PSC2 End Cycle */
+#define PSC2_EC_vect_num		2
+#define PSC2_EC_vect			_VECTOR(2)
+#define SIG_PSC2_END_CYCLE		_VECTOR(2)
+
+/* PSC0 Capture Event */
+#define PSC0_CAPT_vect_num		5
+#define PSC0_CAPT_vect			_VECTOR(5)
+#define SIG_PSC0_CAPTURE		_VECTOR(5)
+
+/* PSC0 End Cycle */
+#define PSC0_EC_vect_num		6
+#define PSC0_EC_vect			_VECTOR(6)
+#define SIG_PSC0_END_CYCLE		_VECTOR(6)
+
+/* Analog Comparator 0 */
+#define ANALOG_COMP_0_vect_num	7
+#define ANALOG_COMP_0_vect		_VECTOR(7)
+#define SIG_COMPARATOR0			_VECTOR(7)
+
+/* Analog Comparator 2 */
+#define ANALOG_COMP_2_vect_num	9
+#define ANALOG_COMP_2_vect		_VECTOR(9)
+#define SIG_COMPARATOR2			_VECTOR(9)
+
+/* External Interrupt Request 0 */
+#define INT0_vect_num		10
+#define INT0_vect			_VECTOR(10)
+#define SIG_INTERRUPT0			_VECTOR(10)
+
+/* Timer/Counter1 Capture Event */
+#define TIMER1_CAPT_vect_num	11
+#define TIMER1_CAPT_vect		_VECTOR(11)
+#define SIG_INPUT_CAPTURE1		_VECTOR(11)
+
+/* Timer/Counter1 Compare Match A */
+#define TIMER1_COMPA_vect_num	12
+#define TIMER1_COMPA_vect		_VECTOR(12)
+#define SIG_OUTPUT_COMPARE1A		_VECTOR(12)
+#define SIG_OUTPUT_COMPARE1_A		_VECTOR(12)
+
+/* Timer/Counter Compare Match B */
+#define TIMER1_COMPB_vect_num	13
+#define TIMER1_COMPB_vect		_VECTOR(13)
+#define SIG_OUTPUT_COMPARE1B		_VECTOR(13)
+#define SIG_OUTPUT_COMPARE1_B		_VECTOR(13)
+
+/* Timer/Counter1 Overflow */
+#define TIMER1_OVF_vect_num		15
+#define TIMER1_OVF_vect			_VECTOR(15)
+#define SIG_OVERFLOW1			_VECTOR(15)
+
+/* Timer/Counter0 Compare Match A */
+#define TIMER0_COMP_A_vect_num	16
+#define TIMER0_COMP_A_vect		_VECTOR(16)
+#define SIG_OUTPUT_COMPARE0A		_VECTOR(16)
+#define SIG_OUTPUT_COMPARE0_A		_VECTOR(16)
+
+/* Timer/Counter0 Overflow */
+#define TIMER0_OVF_vect_num		17
+#define TIMER0_OVF_vect			_VECTOR(17)
+#define SIG_OVERFLOW0			_VECTOR(17)
+
+/* ADC Conversion Complete */
+#define ADC_vect_num		18
+#define ADC_vect			_VECTOR(18)
+#define SIG_ADC				_VECTOR(18)
+
+/* External Interrupt Request 1 */
+#define INT1_vect_num		19
+#define INT1_vect			_VECTOR(19)
+#define SIG_INTERRUPT1			_VECTOR(19)
+
+/* SPI Serial Transfer Complete */
+#define SPI_STC_vect_num		20
+#define SPI_STC_vect			_VECTOR(20)
+#define SIG_SPI				_VECTOR(20)
+
+/* External Interrupt Request 2 */
+#define INT2_vect_num		24
+#define INT2_vect			_VECTOR(24)
+#define SIG_INTERRUPT2			_VECTOR(24)
+
+/* Watchdog Timeout Interrupt */
+#define WDT_vect_num		25
+#define WDT_vect			_VECTOR(25)
+#define SIG_WDT				_VECTOR(25)
+#define SIG_WATCHDOG_TIMEOUT		_VECTOR(25)
+
+/* EEPROM Ready */
+#define EE_READY_vect_num		26
+#define EE_READY_vect			_VECTOR(26)
+#define SIG_EEPROM_READY		_VECTOR(26)
+
+/* Timer Counter 0 Compare Match B */
+#define TIMER0_COMPB_vect_num	27
+#define TIMER0_COMPB_vect		_VECTOR(27)
+#define SIG_OUTPUT_COMPARE0B		_VECTOR(27)
+#define SIG_OUTPUT_COMPARE0_B		_VECTOR(27)
+
+/* External Interrupt Request 3 */
+#define INT3_vect_num		28
+#define INT3_vect			_VECTOR(28)
+#define SIG_INTERRUPT3			_VECTOR(28)
+
+/* Store Program Memory Read */
+#define SPM_READY_vect_num		31
+#define SPM_READY_vect			_VECTOR(31)
+#define SIG_SPM_READY			_VECTOR(31)
+
+#define _VECTORS_SIZE   64
+
+/* Constants */
+#define SPM_PAGESIZE    64
+
+#define RAMSTART    0x100
+#define RAMEND      0x02FF
+#define XRAMEND     RAMEND
+#define E2END       0x01FF
+#define FLASHEND    0x1FFF
+
+
+/* Fuse Information */
+
+#define FUSE_MEMORY_SIZE 3
+
+/* Low Fuse Byte */
+#define FUSE_CKSEL0  (unsigned char)~_BV(0)  /* Select Clock Source */
+#define FUSE_CKSEL1  (unsigned char)~_BV(1)  /* Select Clock Source */
+#define FUSE_CKSEL2  (unsigned char)~_BV(2)  /* Select Clock Source */
+#define FUSE_CKSEL3  (unsigned char)~_BV(3)  /* Select Clock Source */
+#define FUSE_SUT0    (unsigned char)~_BV(4)  /* Select start-up time */
+#define FUSE_SUT1    (unsigned char)~_BV(5)  /* Select start-up time */
+#define FUSE_CKOUT   (unsigned char)~_BV(6)  /* Oscillator output option */
+#define FUSE_CKDIV8  (unsigned char)~_BV(7)  /* Divide clock by 8 */
+#define LFUSE_DEFAULT (FUSE_CKSEL0 & FUSE_CKSEL2 & FUSE_CKSEL3 & FUSE_SUT0 & FUSE_CKDIV8)
+
+/* High Fuse Byte */
+#define FUSE_BODLEVEL0  (unsigned char)~_BV(0)
+#define FUSE_BODLEVEL1  (unsigned char)~_BV(1)
+#define FUSE_BODLEVEL2  (unsigned char)~_BV(2)
+#define FUSE_EESAVE     (unsigned char)~_BV(3)  /* EEPROM memory is preserved through chip erase */
+#define FUSE_WDTON      (unsigned char)~_BV(4)  /* Watchdog timer always on */
+#define FUSE_SPIEN      (unsigned char)~_BV(5)  /* Enable Serial programming and Data Downloading */
+#define FUSE_DWEN       (unsigned char)~_BV(6)  /* debugWIRE Enable */
+#define FUSE_RSTDISBL   (unsigned char)~_BV(7)  /* External Reset Diasble */
+#define HFUSE_DEFAULT (FUSE_SPIEN)
+
+/* Extended Fuse Byte */
+#define FUSE_BOOTRST     (unsigned char)~_BV(0)
+#define FUSE_BOOTSZ0     (unsigned char)~_BV(1)
+#define FUSE_BOOTSZ1     (unsigned char)~_BV(2)
+#define FUSE_PSCRV       (unsigned char)~_BV(4)
+#define FUSE_PSC0RB      (unsigned char)~_BV(5)
+#define FUSE_PSC2RB      (unsigned char)~_BV(7)
+#define EFUSE_DEFAULT (FUSE_BOOTSZ0 & FUSE_BOOTSZ1)
+
+
+/* Lock Bits */
+#define __LOCK_BITS_EXIST
+#define __BOOT_LOCK_BITS_0_EXIST
+#define __BOOT_LOCK_BITS_1_EXIST 
+
+#define SLEEP_MODE_IDLE (0x00<<1)
+#define SLEEP_MODE_ADC (0x01<<1)
+#define SLEEP_MODE_PWR_DOWN (0x02<<1)
+#define SLEEP_MODE_STANDBY (0x06<<1)
+
+#endif /* _AVR_IOPWM1_H_ */